API tools faq
paste
Guest User

^[[Aknap@mint dmesg [ 0.000000] Initializing cgroup subsy

a guest
May 21st, 2012
170
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 78.95 KB | None | 0 0
raw download clone embed print report
  1. knap@mint dmesg
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Linux version 3.2.0-24-generic (buildd@vernadsky) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #37-Ubuntu SMP Wed Apr 25 08:43:52 UTC 2012 (Ubuntu 3.2.0-24.37-generic 3.2.14)
  5. [ 0.000000] KERNEL supported cpus:
  6. [ 0.000000] Intel GenuineIntel
  7. [ 0.000000] AMD AuthenticAMD
  8. [ 0.000000] NSC Geode by NSC
  9. [ 0.000000] Cyrix CyrixInstead
  10. [ 0.000000] Centaur CentaurHauls
  11. [ 0.000000] Transmeta GenuineTMx86
  12. [ 0.000000] Transmeta TransmetaCPU
  13. [ 0.000000] UMC UMC UMC UMC
  14. [ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
  15. [ 0.000000] Disabled fast string operations
  16. [ 0.000000] BIOS-provided physical RAM map:
  17. [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
  18. [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
  19. [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
  20. [ 0.000000] BIOS-e820: 0000000000100000 - 000000006ffa0000 (usable)
  21. [ 0.000000] BIOS-e820: 000000006ffa0000 - 000000006ffae000 (ACPI data)
  22. [ 0.000000] BIOS-e820: 000000006ffae000 - 000000006fff0000 (ACPI NVS)
  23. [ 0.000000] BIOS-e820: 000000006fff0000 - 0000000080000000 (reserved)
  24. [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  25. [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  26. [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
  27. [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
  28. [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
  29. [ 0.000000] DMI present.
  30. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015 10/12/2009
  31. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  32. [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
  33. [ 0.000000] last_pfn = 0x6ffa0 max_arch_pfn = 0x100000
  34. [ 0.000000] MTRR default type: uncachable
  35. [ 0.000000] MTRR fixed ranges enabled:
  36. [ 0.000000] 00000-9FFFF write-back
  37. [ 0.000000] A0000-BFFFF uncachable
  38. [ 0.000000] C0000-CFFFF write-protect
  39. [ 0.000000] D0000-DFFFF uncachable
  40. [ 0.000000] E0000-EFFFF write-through
  41. [ 0.000000] F0000-FFFFF write-protect
  42. [ 0.000000] MTRR variable ranges enabled:
  43. [ 0.000000] 0 base 000000000 mask 080000000 write-back
  44. [ 0.000000] 1 disabled
  45. [ 0.000000] 2 disabled
  46. [ 0.000000] 3 disabled
  47. [ 0.000000] 4 disabled
  48. [ 0.000000] 5 disabled
  49. [ 0.000000] 6 disabled
  50. [ 0.000000] 7 disabled
  51. [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  52. [ 0.000000] found SMP MP-table at [c00ff780] ff780
  53. [ 0.000000] initial memory mapped : 0 - 01c00000
  54. [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
  55. [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
  56. [ 0.000000] 0000000000 - 00377fe000 page 4k
  57. [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1b1f000-1c00000
  58. [ 0.000000] RAMDISK: 36502000 - 37279000
  59. [ 0.000000] ACPI: RSDP 000faab0 00014 (v00 ACPIAM)
  60. [ 0.000000] ACPI: RSDT 6ffa0000 00044 (v01 DELL QA09 20091012 MSFT 00000097)
  61. [ 0.000000] ACPI: FACP 6ffa0200 00084 (v01 DELL QA09 20091012 MSFT 00000097)
  62. [ 0.000000] ACPI: DSDT 6ffa04a0 070E9 (v01 NVDA NVDAACPI 00001000 INTL 20051117)
  63. [ 0.000000] ACPI: FACS 6ffae000 00040
  64. [ 0.000000] ACPI: \xffffffff\xffffffff\xffffffff\xffffffff fff40000 FFFFFFFF (v255 \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff FFFFFFFF \xffffffff\xffffffff\xffffffff\xffffffff FFFFFFFF)
  65. [ 0.000000] ACPI: APIC 6ffa0390 00080 (v01 DELL APIC0931 20091012 MSFT 00000097)
  66. [ 0.000000] ACPI: MCFG 6ffa0410 0003C (v01 DELL OEMMCFG 20091012 MSFT 00000097)
  67. [ 0.000000] ACPI: WDRT 6ffa0450 00047 (v01 DELL NV-WDRT 20091012 MSFT 00000097)
  68. [ 0.000000] ACPI: OEMB 6ffae040 00079 (v01 DELL OEMB0931 20091012 MSFT 00000097)
  69. [ 0.000000] ACPI: HPET 6ffaa4a0 00038 (v01 DELL OEMHPET0 20091012 MSFT 00000097)
  70. [ 0.000000] ACPI: NVHD 6ffae0c0 00284 (v01 101209 NVHDCP 20091012 MSFT 00000097)
  71. [ 0.000000] ACPI: Local APIC address 0xfee00000
  72. [ 0.000000] 903MB HIGHMEM available.
  73. [ 0.000000] 887MB LOWMEM available.
  74. [ 0.000000] mapped low ram: 0 - 377fe000
  75. [ 0.000000] low ram: 0 - 377fe000
  76. [ 0.000000] Zone PFN ranges:
  77. [ 0.000000] DMA 0x00000010 -> 0x00001000
  78. [ 0.000000] Normal 0x00001000 -> 0x000377fe
  79. [ 0.000000] HighMem 0x000377fe -> 0x0006ffa0
  80. [ 0.000000] Movable zone start PFN for each node
  81. [ 0.000000] early_node_map[2] active PFN ranges
  82. [ 0.000000] 0: 0x00000010 -> 0x0000009e
  83. [ 0.000000] 0: 0x00000100 -> 0x0006ffa0
  84. [ 0.000000] On node 0 totalpages: 458542
  85. [ 0.000000] free_area_init_node: node 0, pgdat c18258c0, node_mem_map f5702200
  86. [ 0.000000] DMA zone: 32 pages used for memmap
  87. [ 0.000000] DMA zone: 0 pages reserved
  88. [ 0.000000] DMA zone: 3950 pages, LIFO batch:0
  89. [ 0.000000] Normal zone: 1744 pages used for memmap
  90. [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
  91. [ 0.000000] HighMem zone: 1808 pages used for memmap
  92. [ 0.000000] HighMem zone: 229522 pages, LIFO batch:31
  93. [ 0.000000] Using APIC driver default
  94. [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
  95. [ 0.000000] ACPI: Local APIC address 0xfee00000
  96. [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  97. [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
  98. [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
  99. [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
  100. [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
  101. [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
  102. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  103. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  104. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
  105. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
  106. [ 0.000000] ACPI: IRQ0 used by override.
  107. [ 0.000000] ACPI: IRQ2 used by override.
  108. [ 0.000000] ACPI: IRQ9 used by override.
  109. [ 0.000000] ACPI: IRQ14 used by override.
  110. [ 0.000000] ACPI: IRQ15 used by override.
  111. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  112. [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
  113. [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
  114. [ 0.000000] nr_irqs_gsi: 40
  115. [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
  116. [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  117. [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
  118. [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
  119. [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
  120. [ 0.000000] Booting paravirtualized kernel on bare hardware
  121. [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
  122. [ 0.000000] PERCPU: Embedded 13 pages/cpu @f77c0000 s31616 r0 d21632 u53248
  123. [ 0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096
  124. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  125. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454958
  126. [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=533b4514-fa82-4470-bbcf-6f2b7e58f2da ro quiet splash vt.handoff=7
  127. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  128. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  129. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  130. [ 0.000000] Initializing CPU#0
  131. [ 0.000000] allocated 7338240 bytes of page_cgroup
  132. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  133. [ 0.000000] Initializing HighMem for node 0 (000377fe:0006ffa0)
  134. [ 0.000000] Memory: 1786944k/1834624k available (5627k kernel code, 47224k reserved, 2764k data, 712k init, 925320k highmem)
  135. [ 0.000000] virtual kernel memory layout:
  136. [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
  137. [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
  138. [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
  139. [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
  140. [ 0.000000] .init : 0xc1833000 - 0xc18e5000 ( 712 kB)
  141. [ 0.000000] .data : 0xc157ef84 - 0xc1832080 (2764 kB)
  142. [ 0.000000] .text : 0xc1000000 - 0xc157ef84 (5627 kB)
  143. [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  144. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  145. [ 0.000000] Hierarchical RCU implementation.
  146. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  147. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
  148. [ 0.000000] CPU 0 irqstacks, hard=f4c0a000 soft=f4c0c000
  149. [ 0.000000] spurious 8259A interrupt: IRQ7.
  150. [ 0.000000] vt handoff: transparent VT on vt#7
  151. [ 0.000000] Console: colour dummy device 80x25
  152. [ 0.000000] console [tty0] enabled
  153. [ 0.000000] hpet clockevent registered
  154. [ 0.000000] Fast TSC calibration using PIT
  155. [ 0.000000] Detected 1600.025 MHz processor.
  156. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.05 BogoMIPS (lpj=6400100)
  157. [ 0.004017] pid_max: default: 32768 minimum: 301
  158. [ 0.004076] Security Framework initialized
  159. [ 0.004118] AppArmor: AppArmor initialized
  160. [ 0.004123] Yama: becoming mindful.
  161. [ 0.004253] Mount-cache hash table entries: 512
  162. [ 0.004557] Initializing cgroup subsys cpuacct
  163. [ 0.004574] Initializing cgroup subsys memory
  164. [ 0.004594] Initializing cgroup subsys devices
  165. [ 0.004600] Initializing cgroup subsys freezer
  166. [ 0.004606] Initializing cgroup subsys blkio
  167. [ 0.004623] Initializing cgroup subsys perf_event
  168. [ 0.004673] Atom PSE erratum detected, BIOS microcode update recommended
  169. [ 0.004679] Disabled fast string operations
  170. [ 0.004688] CPU: Physical Processor ID: 0
  171. [ 0.004693] CPU: Processor Core ID: 0
  172. [ 0.004699] mce: CPU supports 5 MCE banks
  173. [ 0.004714] CPU0: Thermal monitoring enabled (TM1)
  174. [ 0.004723] using mwait in idle threads.
  175. [ 0.009050] ACPI: Core revision 20110623
  176. [ 0.020032] ftrace: allocating 25954 entries in 51 pages
  177. [ 0.028064] Enabling APIC mode: Flat. Using 1 I/O APICs
  178. [ 0.028556] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  179. [ 0.068257] CPU0: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
  180. [ 0.072003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
  181. [ 0.072003] ... version: 3
  182. [ 0.072003] ... bit width: 40
  183. [ 0.072003] ... generic registers: 2
  184. [ 0.072003] ... value mask: 000000ffffffffff
  185. [ 0.072003] ... max period: 000000007fffffff
  186. [ 0.072003] ... fixed-purpose events: 3
  187. [ 0.072003] ... event mask: 0000000700000003
  188. [ 0.072003] NMI watchdog enabled, takes one hw-pmu counter.
  189. [ 0.072003] CPU 1 irqstacks, hard=f4d12000 soft=f4d14000
  190. [ 0.072003] Booting Node 0, Processors #1
  191. [ 0.072003] smpboot cpu 1: start_ip = 9a000
  192. [ 0.008000] Initializing CPU#1
  193. [ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended
  194. [ 0.008000] Disabled fast string operations
  195. [ 0.160072] NMI watchdog enabled, takes one hw-pmu counter.
  196. [ 0.160326] CPU 2 irqstacks, hard=f4d20000 soft=f4d22000
  197. [ 0.160332] #2
  198. [ 0.160336] smpboot cpu 2: start_ip = 9a000
  199. [ 0.008000] Initializing CPU#2
  200. [ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended
  201. [ 0.008000] Disabled fast string operations
  202. [ 0.252087] NMI watchdog enabled, takes one hw-pmu counter.
  203. [ 0.252382] CPU 3 irqstacks, hard=f4d2e000 soft=f4d38000
  204. [ 0.252388] #3 Ok.
  205. [ 0.252392] smpboot cpu 3: start_ip = 9a000
  206. [ 0.008000] Initializing CPU#3
  207. [ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended
  208. [ 0.008000] Disabled fast string operations
  209. [ 0.344073] NMI watchdog enabled, takes one hw-pmu counter.
  210. [ 0.344141] Brought up 4 CPUs
  211. [ 0.344149] Total of 4 processors activated (12800.19 BogoMIPS).
  212. [ 0.346985] devtmpfs: initialized
  213. [ 0.346985] EVM: security.selinux
  214. [ 0.346985] EVM: security.SMACK64
  215. [ 0.346985] EVM: security.capability
  216. [ 0.346985] PM: Registering ACPI NVS region at 6ffae000 (270336 bytes)
  217. [ 0.351232] print_constraints: dummy:
  218. [ 0.351321] RTC time: 10:46:39, date: 05/21/12
  219. [ 0.351423] NET: Registered protocol family 16
  220. [ 0.351453] Trying to unpack rootfs image as initramfs...
  221. [ 0.351953] EISA bus registered
  222. [ 0.352113] ACPI: bus type pci registered
  223. [ 0.352357] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
  224. [ 0.352368] PCI: not using MMCONFIG
  225. [ 0.352732] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
  226. [ 0.352740] PCI: Using configuration type 1 for base access
  227. [ 0.358352] bio: create slab <bio-0> at 0
  228. [ 0.358352] ACPI: Added _OSI(Module Device)
  229. [ 0.358352] ACPI: Added _OSI(Processor Device)
  230. [ 0.358352] ACPI: Added _OSI(3.0 _SCP Extensions)
  231. [ 0.358352] ACPI: Added _OSI(Processor Aggregator Device)
  232. [ 0.364334] ACPI: EC: Look up EC in DSDT
  233. [ 0.370286] ACPI: Executed 1 blocks of module-level executable AML code
  234. [ 0.380495] ACPI: Interpreter enabled
  235. [ 0.380526] ACPI: (supports S0 S1 S3 S4 S5)
  236. [ 0.380601] ACPI: Using IOAPIC for interrupt routing
  237. [ 0.380699] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
  238. [ 0.384913] PCI: MMCONFIG at [mem 0xfc000000-0xfdffffff] reserved in ACPI motherboard resources
  239. [ 0.384925] PCI: Using MMCONFIG for extended config space
  240. [ 0.416206] ACPI: No dock devices found.
  241. [ 0.416216] HEST: Table not found.
  242. [ 0.416232] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  243. [ 0.417154] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  244. [ 0.418012] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
  245. [ 0.418024] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
  246. [ 0.418034] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
  247. [ 0.418043] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
  248. [ 0.418053] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfbffffff]
  249. [ 0.418062] pci_root PNP0A03:00: host bridge window [mem 0xfe000000-0xfebfffff]
  250. [ 0.418108] pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600
  251. [ 0.418252] pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500
  252. [ 0.418447] pci 0000:00:03.0: [10de:0aad] type 0 class 0x000601
  253. [ 0.418469] pci 0000:00:03.0: reg 10: [io 0x4f00-0x4fff]
  254. [ 0.418553] pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500
  255. [ 0.418682] pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05
  256. [ 0.418712] pci 0000:00:03.2: reg 10: [io 0x4900-0x493f]
  257. [ 0.418754] pci 0000:00:03.2: reg 20: [io 0x4d00-0x4d3f]
  258. [ 0.418773] pci 0000:00:03.2: reg 24: [io 0x4e00-0x4e3f]
  259. [ 0.418833] pci 0000:00:03.2: PME# supported from D3hot D3cold
  260. [ 0.418850] pci 0000:00:03.2: PME# disabled
  261. [ 0.418892] pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500
  262. [ 0.419087] pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40
  263. [ 0.419120] pci 0000:00:03.5: reg 10: [mem 0xfab80000-0xfabfffff]
  264. [ 0.419294] pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03
  265. [ 0.419320] pci 0000:00:04.0: reg 10: [mem 0xfab7f000-0xfab7ffff]
  266. [ 0.419404] pci 0000:00:04.0: supports D1 D2
  267. [ 0.419411] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
  268. [ 0.419423] pci 0000:00:04.0: PME# disabled
  269. [ 0.419457] pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03
  270. [ 0.419485] pci 0000:00:04.1: reg 10: [mem 0xfab7ec00-0xfab7ecff]
  271. [ 0.419581] pci 0000:00:04.1: supports D1 D2
  272. [ 0.419589] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
  273. [ 0.419600] pci 0000:00:04.1: PME# disabled
  274. [ 0.419647] pci 0000:00:06.0: [10de:0aa7] type 0 class 0x000c03
  275. [ 0.419673] pci 0000:00:06.0: reg 10: [mem 0xfab7d000-0xfab7dfff]
  276. [ 0.419763] pci 0000:00:06.0: supports D1 D2
  277. [ 0.419771] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
  278. [ 0.419782] pci 0000:00:06.0: PME# disabled
  279. [ 0.419817] pci 0000:00:06.1: [10de:0aa9] type 0 class 0x000c03
  280. [ 0.419846] pci 0000:00:06.1: reg 10: [mem 0xfab7e800-0xfab7e8ff]
  281. [ 0.419943] pci 0000:00:06.1: supports D1 D2
  282. [ 0.419951] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
  283. [ 0.419962] pci 0000:00:06.1: PME# disabled
  284. [ 0.420058] pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403
  285. [ 0.420085] pci 0000:00:08.0: reg 10: [mem 0xfab78000-0xfab7bfff]
  286. [ 0.420170] pci 0000:00:08.0: PME# supported from D3hot D3cold
  287. [ 0.420181] pci 0000:00:08.0: PME# disabled
  288. [ 0.420213] pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604
  289. [ 0.420315] pci 0000:00:0a.0: [10de:0ab0] type 0 class 0x000200
  290. [ 0.420341] pci 0000:00:0a.0: reg 10: [mem 0xfab7c000-0xfab7cfff]
  291. [ 0.420358] pci 0000:00:0a.0: reg 14: [io 0xd080-0xd087]
  292. [ 0.420374] pci 0000:00:0a.0: reg 18: [mem 0xfab7e400-0xfab7e4ff]
  293. [ 0.420391] pci 0000:00:0a.0: reg 1c: [mem 0xfab7e000-0xfab7e00f]
  294. [ 0.420453] pci 0000:00:0a.0: supports D1 D2
  295. [ 0.420461] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
  296. [ 0.420473] pci 0000:00:0a.0: PME# disabled
  297. [ 0.420509] pci 0000:00:0b.0: [10de:0ab8] type 0 class 0x000106
  298. [ 0.420536] pci 0000:00:0b.0: reg 10: [io 0xd000-0xd007]
  299. [ 0.420552] pci 0000:00:0b.0: reg 14: [io 0xcc00-0xcc03]
  300. [ 0.420568] pci 0000:00:0b.0: reg 18: [io 0xc880-0xc887]
  301. [ 0.420584] pci 0000:00:0b.0: reg 1c: [io 0xc800-0xc803]
  302. [ 0.420599] pci 0000:00:0b.0: reg 20: [io 0xc480-0xc48f]
  303. [ 0.420615] pci 0000:00:0b.0: reg 24: [mem 0xfab76000-0xfab77fff]
  304. [ 0.420748] pci 0000:00:0c.0: [10de:0ac4] type 1 class 0x000604
  305. [ 0.421019] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
  306. [ 0.421034] pci 0000:00:0c.0: PME# disabled
  307. [ 0.421109] pci 0000:00:10.0: [10de:0aa0] type 1 class 0x000604
  308. [ 0.421190] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
  309. [ 0.421200] pci 0000:00:10.0: PME# disabled
  310. [ 0.421282] pci 0000:00:15.0: [10de:0ac6] type 1 class 0x000604
  311. [ 0.421562] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
  312. [ 0.421579] pci 0000:00:15.0: PME# disabled
  313. [ 0.421684] pci 0000:00:16.0: [10de:0ac7] type 1 class 0x000604
  314. [ 0.421951] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
  315. [ 0.421966] pci 0000:00:16.0: PME# disabled
  316. [ 0.422071] pci 0000:00:17.0: [10de:0ac7] type 1 class 0x000604
  317. [ 0.422351] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
  318. [ 0.422367] pci 0000:00:17.0: PME# disabled
  319. [ 0.422474] pci 0000:00:18.0: [10de:0ac7] type 1 class 0x000604
  320. [ 0.422741] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
  321. [ 0.422757] pci 0000:00:18.0: PME# disabled
  322. [ 0.422905] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
  323. [ 0.422926] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
  324. [ 0.422938] pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
  325. [ 0.422950] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  326. [ 0.422962] pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
  327. [ 0.422974] pci 0000:00:09.0: bridge window [mem 0x80000000-0xfbffffff] (subtractive decode)
  328. [ 0.422985] pci 0000:00:09.0: bridge window [mem 0xfe000000-0xfebfffff] (subtractive decode)
  329. [ 0.423181] pci 0000:02:00.0: [14f1:8852] type 0 class 0x000400
  330. [ 0.423223] pci 0000:02:00.0: reg 10: [mem 0xfac00000-0xfadfffff 64bit]
  331. [ 0.423390] pci 0000:02:00.0: supports D1 D2
  332. [ 0.423398] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
  333. [ 0.423411] pci 0000:02:00.0: PME# disabled
  334. [ 0.423444] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
  335. [ 0.423473] pci 0000:00:0c.0: PCI bridge to [bus 02-02]
  336. [ 0.423503] pci 0000:00:0c.0: bridge window [mem 0xfac00000-0xfadfffff]
  337. [ 0.423592] pci 0000:03:00.0: [10de:087d] type 0 class 0x000300
  338. [ 0.423619] pci 0000:03:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
  339. [ 0.423641] pci 0000:03:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
  340. [ 0.423662] pci 0000:03:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
  341. [ 0.423679] pci 0000:03:00.0: reg 24: [io 0xec00-0xec7f]
  342. [ 0.423695] pci 0000:03:00.0: reg 30: [mem 0xfafe0000-0xfaffffff pref]
  343. [ 0.423794] pci 0000:00:10.0: PCI bridge to [bus 03-03]
  344. [ 0.423809] pci 0000:00:10.0: bridge window [io 0xe000-0xefff]
  345. [ 0.423822] pci 0000:00:10.0: bridge window [mem 0xfaf00000-0xfbffffff]
  346. [ 0.423835] pci 0000:00:10.0: bridge window [mem 0xe0000000-0xf9ffffff 64bit pref]
  347. [ 0.424079] pci 0000:04:00.0: [168c:002b] type 0 class 0x000280
  348. [ 0.424115] pci 0000:04:00.0: reg 10: [mem 0xfebf0000-0xfebfffff 64bit]
  349. [ 0.424246] pci 0000:04:00.0: supports D1
  350. [ 0.424255] pci 0000:04:00.0: PME# supported from D0 D1 D3hot D3cold
  351. [ 0.424267] pci 0000:04:00.0: PME# disabled
  352. [ 0.432105] pci 0000:00:15.0: PCI bridge to [bus 04-04]
  353. [ 0.432142] pci 0000:00:15.0: bridge window [mem 0xfeb00000-0xfebfffff]
  354. [ 0.432358] pci 0000:00:16.0: PCI bridge to [bus 05-05]
  355. [ 0.432567] pci 0000:00:17.0: PCI bridge to [bus 06-06]
  356. [ 0.432778] pci 0000:00:18.0: PCI bridge to [bus 07-07]
  357. [ 0.432914] pci_bus 0000:00: on NUMA node 0
  358. [ 0.432933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  359. [ 0.433464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBB0._PRT]
  360. [ 0.433637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
  361. [ 0.433749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
  362. [ 0.433926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
  363. [ 0.434080] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
  364. [ 0.434222] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
  365. [ 0.434364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
  366. [ 0.434910] pci0000:00: Requesting ACPI _OSC control (0x1d)
  367. [ 0.435679] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
  368. [ 0.435688] ACPI _OSC control for PCIe not granted, disabling ASPM
  369. [ 0.468608] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
  370. [ 0.469032] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
  371. [ 0.469450] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
  372. [ 0.469875] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
  373. [ 0.470298] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
  374. [ 0.470737] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
  375. [ 0.471153] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
  376. [ 0.471577] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
  377. [ 0.471986] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
  378. [ 0.472517] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
  379. [ 0.472935] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
  380. [ 0.473354] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
  381. [ 0.473811] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
  382. [ 0.474224] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
  383. [ 0.474645] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
  384. [ 0.475057] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
  385. [ 0.475477] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *11
  386. [ 0.475903] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
  387. [ 0.476371] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
  388. [ 0.476793] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
  389. [ 0.477215] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
  390. [ 0.477630] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
  391. [ 0.478062] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
  392. [ 0.478509] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
  393. [ 0.478922] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
  394. [ 0.479360] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
  395. [ 0.479778] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
  396. [ 0.480245] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
  397. [ 0.480662] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
  398. [ 0.481087] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
  399. [ 0.481500] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
  400. [ 0.481911] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
  401. [ 0.482347] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *9
  402. [ 0.482769] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
  403. [ 0.483213] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
  404. [ 0.483649] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *9
  405. [ 0.484113] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
  406. [ 0.484554] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
  407. [ 0.484980] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
  408. [ 0.485414] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
  409. [ 0.485881] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
  410. [ 0.486321] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
  411. [ 0.486741] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11
  412. [ 0.487187] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
  413. [ 0.487632] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
  414. [ 0.488090] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
  415. [ 0.488540] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
  416. [ 0.488986] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
  417. [ 0.489409] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *15
  418. [ 0.489840] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *14
  419. [ 0.490202] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
  420. [ 0.490202] vgaarb: loaded
  421. [ 0.490202] vgaarb: bridge control possible 0000:03:00.0
  422. [ 0.490202] i2c-core: driver [aat2870] using legacy suspend method
  423. [ 0.490202] i2c-core: driver [aat2870] using legacy resume method
  424. [ 0.490202] SCSI subsystem initialized
  425. [ 0.490202] libata version 3.00 loaded.
  426. [ 0.490202] usbcore: registered new interface driver usbfs
  427. [ 0.490202] usbcore: registered new interface driver hub
  428. [ 0.490202] usbcore: registered new device driver usb
  429. [ 0.492241] PCI: Using ACPI for IRQ routing
  430. [ 0.492261] PCI: pci_cache_line_size set to 64 bytes
  431. [ 0.492471] reserve RAM buffer: 000000000009e800 - 000000000009ffff
  432. [ 0.492481] reserve RAM buffer: 000000006ffa0000 - 000000006fffffff
  433. [ 0.492874] NetLabel: Initializing
  434. [ 0.492882] NetLabel: domain hash size = 128
  435. [ 0.492888] NetLabel: protocols = UNLABELED CIPSOv4
  436. [ 0.492922] NetLabel: unlabeled traffic allowed by default
  437. [ 0.493013] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
  438. [ 0.493013] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
  439. [ 0.493013] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
  440. [ 0.504227] Switching to clocksource hpet
  441. [ 0.529368] AppArmor: AppArmor Filesystem Enabled
  442. [ 0.529460] pnp: PnP ACPI init
  443. [ 0.529515] ACPI: bus type pnp registered
  444. [ 0.529941] pnp 00:00: [bus 00-ff]
  445. [ 0.529952] pnp 00:00: [io 0x0cf8-0x0cff]
  446. [ 0.529962] pnp 00:00: [io 0x0000-0x0cf7 window]
  447. [ 0.529972] pnp 00:00: [io 0x0d00-0xffff window]
  448. [ 0.529982] pnp 00:00: [mem 0x000a0000-0x000bffff window]
  449. [ 0.529991] pnp 00:00: [mem 0x000d0000-0x000dffff window]
  450. [ 0.530002] pnp 00:00: [mem 0x80000000-0xfbffffff window]
  451. [ 0.530012] pnp 00:00: [mem 0xfe000000-0xfebfffff window]
  452. [ 0.530247] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
  453. [ 0.530504] pnp 00:01: [io 0x03f8-0x03ff]
  454. [ 0.530532] pnp 00:01: [irq 4]
  455. [ 0.530541] pnp 00:01: [dma 0 disabled]
  456. [ 0.530645] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
  457. [ 0.530699] pnp 00:02: [dma 4]
  458. [ 0.530708] pnp 00:02: [io 0x0000-0x000f]
  459. [ 0.530716] pnp 00:02: [io 0x0081-0x0083]
  460. [ 0.530723] pnp 00:02: [io 0x0087]
  461. [ 0.530731] pnp 00:02: [io 0x0089-0x008b]
  462. [ 0.530738] pnp 00:02: [io 0x008f]
  463. [ 0.530746] pnp 00:02: [io 0x00c0-0x00df]
  464. [ 0.530851] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
  465. [ 0.530887] pnp 00:03: [io 0x0061]
  466. [ 0.530981] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
  467. [ 0.531018] pnp 00:04: [io 0x00f0-0x00ff]
  468. [ 0.531037] pnp 00:04: [irq 13]
  469. [ 0.531138] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
  470. [ 0.533275] pnp 00:05: [mem 0x000d0000-0x000d3fff window]
  471. [ 0.533288] pnp 00:05: [mem 0x000d4000-0x000d7fff window]
  472. [ 0.533297] pnp 00:05: [mem 0x000de000-0x000dffff window]
  473. [ 0.533306] pnp 00:05: [io 0x0010-0x001f]
  474. [ 0.533314] pnp 00:05: [io 0x0022-0x003f]
  475. [ 0.533321] pnp 00:05: [io 0x0044-0x004d]
  476. [ 0.533329] pnp 00:05: [io 0x0050-0x005f]
  477. [ 0.533337] pnp 00:05: [io 0x0062-0x0063]
  478. [ 0.533344] pnp 00:05: [io 0x0065-0x006f]
  479. [ 0.533352] pnp 00:05: [io 0x0072-0x007f]
  480. [ 0.533359] pnp 00:05: [io 0x0080]
  481. [ 0.533367] pnp 00:05: [io 0x0084-0x0086]
  482. [ 0.533374] pnp 00:05: [io 0x0088]
  483. [ 0.533381] pnp 00:05: [io 0x008c-0x008e]
  484. [ 0.533394] pnp 00:05: [io 0x0090-0x009f]
  485. [ 0.533402] pnp 00:05: [io 0x00a2-0x00bf]
  486. [ 0.533410] pnp 00:05: [io 0x00e0-0x00ef]
  487. [ 0.533418] pnp 00:05: [io 0x04d0-0x04d1]
  488. [ 0.533426] pnp 00:05: [io 0x0800-0x080f]
  489. [ 0.533434] pnp 00:05: [io 0x4000-0x407f]
  490. [ 0.533441] pnp 00:05: [io 0x4080-0x40ff]
  491. [ 0.533449] pnp 00:05: [io 0x4400-0x447f]
  492. [ 0.533457] pnp 00:05: [io 0x4480-0x44ff]
  493. [ 0.533464] pnp 00:05: [io 0x4800-0x487f]
  494. [ 0.533472] pnp 00:05: [io 0x4880-0x48ff]
  495. [ 0.533482] pnp 00:05: [mem 0x00000000-0xffffffff disabled]
  496. [ 0.533491] pnp 00:05: [mem 0xfefe2000-0xfefe3fff]
  497. [ 0.533500] pnp 00:05: [mem 0xfefe1000-0xfefe1fff]
  498. [ 0.533509] pnp 00:05: [mem 0xfee01000-0xfeefffff]
  499. [ 0.533785] system 00:05: [io 0x04d0-0x04d1] has been reserved
  500. [ 0.533797] system 00:05: [io 0x0800-0x080f] has been reserved
  501. [ 0.533808] system 00:05: [io 0x4000-0x407f] has been reserved
  502. [ 0.533817] system 00:05: [io 0x4080-0x40ff] has been reserved
  503. [ 0.533827] system 00:05: [io 0x4400-0x447f] has been reserved
  504. [ 0.533837] system 00:05: [io 0x4480-0x44ff] has been reserved
  505. [ 0.533847] system 00:05: [io 0x4800-0x487f] has been reserved
  506. [ 0.533857] system 00:05: [io 0x4880-0x48ff] has been reserved
  507. [ 0.533868] system 00:05: [mem 0x000d0000-0x000d3fff window] has been reserved
  508. [ 0.533879] system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserved
  509. [ 0.533890] system 00:05: [mem 0x000de000-0x000dffff window] has been reserved
  510. [ 0.533902] system 00:05: [mem 0xfefe2000-0xfefe3fff] has been reserved
  511. [ 0.533912] system 00:05: [mem 0xfefe1000-0xfefe1fff] has been reserved
  512. [ 0.533923] system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved
  513. [ 0.533936] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
  514. [ 0.534343] pnp 00:06: [mem 0xfed00000-0xfed00fff]
  515. [ 0.534355] pnp 00:06: [irq 2 disabled]
  516. [ 0.534384] pnp 00:06: [irq 8]
  517. [ 0.534506] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
  518. [ 0.534614] pnp 00:07: [io 0x0070-0x0071]
  519. [ 0.534732] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
  520. [ 0.535066] pnp 00:08: [io 0x0060]
  521. [ 0.535075] pnp 00:08: [io 0x0064]
  522. [ 0.535084] pnp 00:08: [mem 0xfec00000-0xfec00fff]
  523. [ 0.535092] pnp 00:08: [mem 0xfee00000-0xfee00fff]
  524. [ 0.535264] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
  525. [ 0.535276] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
  526. [ 0.535288] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
  527. [ 0.535799] pnp 00:09: [io 0x0000-0xffffffff disabled]
  528. [ 0.535810] pnp 00:09: [io 0x0a00-0x0a0f]
  529. [ 0.535818] pnp 00:09: [io 0x0a10-0x0a1f]
  530. [ 0.536051] system 00:09: [io 0x0a00-0x0a0f] has been reserved
  531. [ 0.536063] system 00:09: [io 0x0a10-0x0a1f] has been reserved
  532. [ 0.536076] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
  533. [ 0.536283] pnp 00:0a: [mem 0xfc000000-0xfdffffff]
  534. [ 0.536458] system 00:0a: [mem 0xfc000000-0xfdffffff] has been reserved
  535. [ 0.536473] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
  536. [ 0.537118] pnp 00:0b: [mem 0x00000000-0x0009ffff]
  537. [ 0.537128] pnp 00:0b: [mem 0x000c0000-0x000cffff]
  538. [ 0.537137] pnp 00:0b: [mem 0x000e0000-0x000fffff]
  539. [ 0.537146] pnp 00:0b: [mem 0x00100000-0x7fffffff]
  540. [ 0.537154] pnp 00:0b: [mem 0xfec00000-0xffffffff]
  541. [ 0.537377] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
  542. [ 0.537391] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
  543. [ 0.537402] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
  544. [ 0.537413] system 00:0b: [mem 0x00100000-0x7fffffff] could not be reserved
  545. [ 0.537424] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
  546. [ 0.537437] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
  547. [ 0.540531] pnp: PnP ACPI: found 12 devices
  548. [ 0.540540] ACPI: ACPI bus type pnp unregistered
  549. [ 0.540551] PnPBIOS: Disabled by ACPI PNP
  550. [ 0.585248] PCI: max bus depth: 1 pci_try_num: 2
  551. [ 0.585398] pci 0000:00:09.0: PCI bridge to [bus 01-01]
  552. [ 0.585418] pci 0000:00:0c.0: PCI bridge to [bus 02-02]
  553. [ 0.585438] pci 0000:00:0c.0: bridge window [mem 0xfac00000-0xfadfffff]
  554. [ 0.585467] pci 0000:00:10.0: PCI bridge to [bus 03-03]
  555. [ 0.585476] pci 0000:00:10.0: bridge window [io 0xe000-0xefff]
  556. [ 0.585488] pci 0000:00:10.0: bridge window [mem 0xfaf00000-0xfbffffff]
  557. [ 0.585500] pci 0000:00:10.0: bridge window [mem 0xe0000000-0xf9ffffff 64bit pref]
  558. [ 0.585514] pci 0000:00:15.0: PCI bridge to [bus 04-04]
  559. [ 0.585532] pci 0000:00:15.0: bridge window [mem 0xfeb00000-0xfebfffff]
  560. [ 0.585560] pci 0000:00:16.0: PCI bridge to [bus 05-05]
  561. [ 0.585596] pci 0000:00:17.0: PCI bridge to [bus 06-06]
  562. [ 0.585633] pci 0000:00:18.0: PCI bridge to [bus 07-07]
  563. [ 0.585685] pci 0000:00:09.0: setting latency timer to 64
  564. [ 0.586422] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
  565. [ 0.586464] pci 0000:00:0c.0: PCI INT A -> Link[LRP0] -> GSI 23 (level, low) -> IRQ 23
  566. [ 0.586483] pci 0000:00:0c.0: setting latency timer to 64
  567. [ 0.586503] pci 0000:00:10.0: setting latency timer to 64
  568. [ 0.587174] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
  569. [ 0.587205] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 22 (level, low) -> IRQ 22
  570. [ 0.587223] pci 0000:00:15.0: setting latency timer to 64
  571. [ 0.587891] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
  572. [ 0.587920] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 21 (level, low) -> IRQ 21
  573. [ 0.587938] pci 0000:00:16.0: setting latency timer to 64
  574. [ 0.588687] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 20
  575. [ 0.588719] pci 0000:00:17.0: PCI INT A -> Link[LRP5] -> GSI 20 (level, low) -> IRQ 20
  576. [ 0.588738] pci 0000:00:17.0: setting latency timer to 64
  577. [ 0.589405] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 23
  578. [ 0.589420] pci 0000:00:18.0: PCI INT A -> Link[LRP6] -> GSI 23 (level, low) -> IRQ 23
  579. [ 0.589437] pci 0000:00:18.0: setting latency timer to 64
  580. [ 0.589453] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
  581. [ 0.589462] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
  582. [ 0.589471] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  583. [ 0.589481] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
  584. [ 0.589490] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfbffffff]
  585. [ 0.589500] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff]
  586. [ 0.589512] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
  587. [ 0.589521] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
  588. [ 0.589530] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
  589. [ 0.589539] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
  590. [ 0.589548] pci_bus 0000:01: resource 8 [mem 0x80000000-0xfbffffff]
  591. [ 0.589558] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff]
  592. [ 0.589567] pci_bus 0000:02: resource 1 [mem 0xfac00000-0xfadfffff]
  593. [ 0.589577] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
  594. [ 0.589586] pci_bus 0000:03: resource 1 [mem 0xfaf00000-0xfbffffff]
  595. [ 0.589596] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf9ffffff 64bit pref]
  596. [ 0.589606] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
  597. [ 0.589746] NET: Registered protocol family 2
  598. [ 0.589967] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  599. [ 0.590906] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  600. [ 0.592115] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  601. [ 0.592664] TCP: Hash tables configured (established 131072 bind 65536)
  602. [ 0.592677] TCP reno registered
  603. [ 0.592694] UDP hash table entries: 512 (order: 2, 16384 bytes)
  604. [ 0.592719] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  605. [ 0.593010] NET: Registered protocol family 1
  606. [ 0.593846] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
  607. [ 0.593868] pci 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
  608. [ 0.676113] pci 0000:00:04.0: PCI INT A disabled
  609. [ 0.676893] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
  610. [ 0.676914] pci 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
  611. [ 0.704125] pci 0000:00:04.1: PCI INT B disabled
  612. [ 0.704881] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 20
  613. [ 0.704900] pci 0000:00:06.0: PCI INT A -> Link[UB11] -> GSI 20 (level, low) -> IRQ 20
  614. [ 0.776128] pci 0000:00:06.0: PCI INT A disabled
  615. [ 0.776869] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 23
  616. [ 0.776887] pci 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI 23 (level, low) -> IRQ 23
  617. [ 1.103631] Freeing initrd memory: 13788k freed
  618. [ 2.376043] pci 0000:00:06.1: EHCI: BIOS handoff failed (BIOS bug?) 01010001
  619. [ 2.376182] pci 0000:00:06.1: PCI INT B disabled
  620. [ 2.376448] pci 0000:03:00.0: Boot video device
  621. [ 2.376460] PCI: CLS 64 bytes, default 64
  622. [ 2.377748] audit: initializing netlink socket (disabled)
  623. [ 2.377776] type=2000 audit(1337597201.372:1): initialized
  624. [ 2.430963] highmem bounce pool size: 64 pages
  625. [ 2.430976] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  626. [ 2.435816] VFS: Disk quotas dquot_6.5.2
  627. [ 2.435974] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  628. [ 2.437542] fuse init (API version 7.17)
  629. [ 2.437822] msgmni has been set to 1709
  630. [ 2.439053] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  631. [ 2.439151] io scheduler noop registered
  632. [ 2.439157] io scheduler deadline registered
  633. [ 2.439179] io scheduler cfq registered (default)
  634. [ 2.440289] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  635. [ 2.440364] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  636. [ 2.440558] intel_idle: MWAIT substates: 0x10
  637. [ 2.440587] intel_idle: v0.4 model 0x1C
  638. [ 2.440591] intel_idle: lapic_timer_reliable_states 0x2
  639. [ 2.440885] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
  640. [ 2.440900] ACPI: Power Button [PWRB]
  641. [ 2.441050] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  642. [ 2.441059] ACPI: Power Button [PWRF]
  643. [ 2.447677] ERST: Table is not found!
  644. [ 2.447683] GHES: HEST is not enabled!
  645. [ 2.447784] isapnp: Scanning for PnP cards...
  646. [ 2.447962] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  647. [ 2.468345] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  648. [ 2.801139] isapnp: No Plug & Play device found
  649. [ 2.849127] 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  650. [ 2.896891] Linux agpgart interface v0.103
  651. [ 2.901579] brd: module loaded
  652. [ 2.903963] loop: module loaded
  653. [ 2.904341] ahci 0000:00:0b.0: version 3.0
  654. [ 2.904877] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
  655. [ 2.904891] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22
  656. [ 2.904989] ahci 0000:00:0b.0: irq 40 for MSI/MSI-X
  657. [ 2.905001] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
  658. [ 2.905117] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
  659. [ 2.905127] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
  660. [ 2.905136] ahci 0000:00:0b.0: setting latency timer to 64
  661. [ 2.907902] scsi0 : ahci
  662. [ 2.908244] scsi1 : ahci
  663. [ 2.908469] scsi2 : ahci
  664. [ 2.908696] scsi3 : ahci
  665. [ 2.908920] scsi4 : ahci
  666. [ 2.909155] scsi5 : ahci
  667. [ 2.909576] ata1: SATA max UDMA/133 abar m8192@0xfab76000 port 0xfab76100 irq 40
  668. [ 2.909584] ata2: SATA max UDMA/133 abar m8192@0xfab76000 port 0xfab76180 irq 40
  669. [ 2.909592] ata3: SATA max UDMA/133 abar m8192@0xfab76000 port 0xfab76200 irq 40
  670. [ 2.909599] ata4: SATA max UDMA/133 abar m8192@0xfab76000 port 0xfab76280 irq 40
  671. [ 2.909606] ata5: SATA max UDMA/133 abar m8192@0xfab76000 port 0xfab76300 irq 40
  672. [ 2.909613] ata6: SATA max UDMA/133 abar m8192@0xfab76000 port 0xfab76380 irq 40
  673. [ 2.911040] Fixed MDIO Bus: probed
  674. [ 2.911109] tun: Universal TUN/TAP device driver, 1.6
  675. [ 2.911114] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  676. [ 2.911283] PPP generic driver version 2.4.2
  677. [ 2.911606] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  678. [ 2.911660] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
  679. [ 2.911705] ehci_hcd 0000:00:04.1: setting latency timer to 64
  680. [ 2.911712] ehci_hcd 0000:00:04.1: EHCI Host Controller
  681. [ 2.911844] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
  682. [ 2.911886] ehci_hcd 0000:00:04.1: debug port 1
  683. [ 2.911900] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
  684. [ 2.911943] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfab7ec00
  685. [ 2.920053] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
  686. [ 2.920425] hub 1-0:1.0: USB hub found
  687. [ 2.920438] hub 1-0:1.0: 6 ports detected
  688. [ 2.920614] ehci_hcd 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI 23 (level, low) -> IRQ 23
  689. [ 2.920644] ehci_hcd 0000:00:06.1: setting latency timer to 64
  690. [ 2.920651] ehci_hcd 0000:00:06.1: EHCI Host Controller
  691. [ 2.920796] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
  692. [ 2.920834] ehci_hcd 0000:00:06.1: debug port 1
  693. [ 2.920847] ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
  694. [ 2.920885] ehci_hcd 0000:00:06.1: irq 23, io mem 0xfab7e800
  695. [ 2.932044] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
  696. [ 2.932392] hub 2-0:1.0: USB hub found
  697. [ 2.932405] hub 2-0:1.0: 6 ports detected
  698. [ 2.932586] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  699. [ 2.932630] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
  700. [ 2.932659] ohci_hcd 0000:00:04.0: setting latency timer to 64
  701. [ 2.932666] ohci_hcd 0000:00:04.0: OHCI Host Controller
  702. [ 2.932821] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
  703. [ 2.932873] ohci_hcd 0000:00:04.0: irq 22, io mem 0xfab7f000
  704. [ 2.990356] hub 3-0:1.0: USB hub found
  705. [ 2.990370] hub 3-0:1.0: 6 ports detected
  706. [ 2.990530] ohci_hcd 0000:00:06.0: PCI INT A -> Link[UB11] -> GSI 20 (level, low) -> IRQ 20
  707. [ 2.990559] ohci_hcd 0000:00:06.0: setting latency timer to 64
  708. [ 2.990566] ohci_hcd 0000:00:06.0: OHCI Host Controller
  709. [ 2.990717] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
  710. [ 2.990771] ohci_hcd 0000:00:06.0: irq 20, io mem 0xfab7d000
  711. [ 3.046335] hub 4-0:1.0: USB hub found
  712. [ 3.046348] hub 4-0:1.0: 6 ports detected
  713. [ 3.046523] uhci_hcd: USB Universal Host Controller Interface driver
  714. [ 3.046712] usbcore: registered new interface driver libusual
  715. [ 3.046846] i8042: PNP: No PS/2 controller found. Probing ports directly.
  716. [ 3.048403] serio: i8042 KBD port at 0x60,0x64 irq 1
  717. [ 3.048421] serio: i8042 AUX port at 0x60,0x64 irq 12
  718. [ 3.048819] mousedev: PS/2 mouse device common for all mice
  719. [ 3.049264] rtc_cmos 00:07: RTC can wake from S4
  720. [ 3.049578] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
  721. [ 3.049644] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
  722. [ 3.049827] device-mapper: uevent: version 1.0.3
  723. [ 3.050038] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
  724. [ 3.050137] EISA: Probing bus 0 at eisa.0
  725. [ 3.050144] EISA: Cannot allocate resource for mainboard
  726. [ 3.050151] Cannot allocate resource for EISA slot 1
  727. [ 3.050156] Cannot allocate resource for EISA slot 2
  728. [ 3.050162] Cannot allocate resource for EISA slot 3
  729. [ 3.050167] Cannot allocate resource for EISA slot 4
  730. [ 3.050173] Cannot allocate resource for EISA slot 5
  731. [ 3.050178] Cannot allocate resource for EISA slot 6
  732. [ 3.050184] Cannot allocate resource for EISA slot 7
  733. [ 3.050189] Cannot allocate resource for EISA slot 8
  734. [ 3.050194] EISA: Detected 0 cards.
  735. [ 3.050214] cpufreq-nforce2: No nForce2 chipset.
  736. [ 3.050402] cpuidle: using governor ladder
  737. [ 3.050718] cpuidle: using governor menu
  738. [ 3.050724] EFI Variables Facility v0.08 2004-May-17
  739. [ 3.051359] TCP cubic registered
  740. [ 3.051673] NET: Registered protocol family 10
  741. [ 3.053219] NET: Registered protocol family 17
  742. [ 3.053273] Registering the dns_resolver key type
  743. [ 3.053323] Using IPI No-Shortcut mode
  744. [ 3.053700] PM: Hibernation image not present or could not be loaded.
  745. [ 3.053728] registered taskstats version 1
  746. [ 3.071577] Magic number: 12:865:780
  747. [ 3.071788] rtc_cmos 00:07: setting system clock to 2012-05-21 10:46:42 UTC (1337597202)
  748. [ 3.071859] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  749. [ 3.071864] EDD information not available.
  750. [ 3.228069] ata5: SATA link down (SStatus 0 SControl 300)
  751. [ 3.228109] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  752. [ 3.228153] ata3: SATA link down (SStatus 0 SControl 300)
  753. [ 3.228191] ata2: SATA link down (SStatus 0 SControl 300)
  754. [ 3.228222] ata6: SATA link down (SStatus 0 SControl 300)
  755. [ 3.228254] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  756. [ 3.230850] ata4.00: ATAPI: HL-DT-STDVDRAM GT32N, 1.00, max UDMA/100
  757. [ 3.233895] ata4.00: configured for UDMA/100
  758. [ 3.239414] ata1.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
  759. [ 3.239423] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32)
  760. [ 3.249377] ata1.00: configured for UDMA/133
  761. [ 3.249710] scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.22 PQ: 0 ANSI: 5
  762. [ 3.250183] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
  763. [ 3.250205] sd 0:0:0:0: Attached scsi generic sg0 type 0
  764. [ 3.250466] sd 0:0:0:0: [sda] Write Protect is off
  765. [ 3.250477] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  766. [ 3.250554] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  767. [ 3.252915] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GT32N 1.00 PQ: 0 ANSI: 5
  768. [ 3.253193] sda: sda1 sda2 sda3 sda4
  769. [ 3.254342] sd 0:0:0:0: [sda] Attached SCSI disk
  770. [ 3.257091] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  771. [ 3.257099] cdrom: Uniform CD-ROM driver Revision: 3.20
  772. [ 3.257457] sr 3:0:0:0: Attached scsi CD-ROM sr0
  773. [ 3.257656] sr 3:0:0:0: Attached scsi generic sg1 type 5
  774. [ 3.257921] Freeing unused kernel memory: 712k freed
  775. [ 3.258564] Write protecting the kernel text: 5628k
  776. [ 3.258666] Write protecting the kernel read-only data: 2324k
  777. [ 3.304171] udevd[105]: starting version 175
  778. [ 3.376219] Refined TSC clocksource calibration: 1599.992 MHz.
  779. [ 3.376239] Switching to clocksource tsc
  780. [ 3.420231] usb 4-1: new low-speed USB device number 2 using ohci_hcd
  781. [ 3.530079] EXT3-fs (sda2): recovery required on readonly filesystem
  782. [ 3.530092] EXT3-fs (sda2): write access will be enabled during recovery
  783. [ 3.539737] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
  784. [ 3.540680] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
  785. [ 3.540702] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
  786. [ 3.540720] forcedeth 0000:00:0a.0: setting latency timer to 64
  787. [ 3.606711] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 04:4b:80:80:80:f0
  788. [ 3.606727] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
  789. [ 3.685257] kjournald starting. Commit interval 5 seconds
  790. [ 3.685353] EXT3-fs (sda2): orphan cleanup on readonly fs
  791. [ 3.685370] ext3_orphan_cleanup: deleting unreferenced inode 1572648
  792. [ 3.685786] ext3_orphan_cleanup: deleting unreferenced inode 26545
  793. [ 3.689118] ext3_orphan_cleanup: deleting unreferenced inode 108999
  794. [ 3.689176] ext3_orphan_cleanup: deleting unreferenced inode 108998
  795. [ 3.689214] ext3_orphan_cleanup: deleting unreferenced inode 108997
  796. [ 3.689247] EXT3-fs (sda2): 5 orphan inodes deleted
  797. [ 3.689256] EXT3-fs (sda2): recovery complete
  798. [ 3.691578] EXT3-fs (sda2): mounted filesystem with ordered data mode
  799. [ 3.724326] usbcore: registered new interface driver usbhid
  800. [ 3.724336] usbhid: USB HID core driver
  801. [ 4.298163] ADDRCONF(NETDEV_UP): eth0: link is not ready
  802. [ 4.317046] udevd[337]: starting version 175
  803. [ 4.683339] Adding 999296k swap on /dev/sda4. Priority:-1 extents:1 across:999296k SS
  804. [ 4.699689] ata1: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0xe frozen
  805. [ 4.699703] ata1: irq_stat 0x00400000, PHY RDY changed
  806. [ 4.699713] ata1: SError: { PHYRdyChg 10B8B Dispar LinkSeq TrStaTrns }
  807. [ 4.699726] ata1: hard resetting link
  808. [ 5.420042] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  809. [ 5.441390] ata1.00: configured for UDMA/133
  810. [ 5.441401] ata1: EH complete
  811. [ 5.465873] lp: driver loaded but no devices found
  812. [ 5.513425] EXT3-fs (sda2): using internal journal
  813. [ 5.659468] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
  814. [ 5.659488] ACPI: resource nForce2_smbus [io 0x4e00-0x4e3f] conflicts with ACPI region SM00 [io 0x4e00-0x4e3f]
  815. [ 5.659497] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  816. [ 5.794077] wmi: Mapper loaded
  817. [ 5.955494] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:06.0/usb4/4-1/4-1:1.0/input/input2
  818. [ 5.956185] microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:06.0-1/input0
  819. [ 5.961223] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  820. [ 5.969979] udevd[383]: renamed network interface eth0 to eth1
  821. [ 5.973848] microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
  822. [ 5.985899] cfg80211: Calling CRDA to update world regulatory domain
  823. [ 6.006958] Linux media interface: v0.10
  824. [ 6.014313] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:06.0/usb4/4-1/4-1:1.1/input/input3
  825. [ 6.019100] Linux video capture interface: v2.00
  826. [ 6.057263] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:06.0-1/input1
  827. [ 6.063186] kjournald starting. Commit interval 5 seconds
  828. [ 6.063521] EXT3-fs (sda3): using internal journal
  829. [ 6.063538] EXT3-fs (sda3): mounted filesystem with ordered data mode
  830. [ 6.092935] [drm] Initialized drm 1.1.0 20060810
  831. [ 6.161945] cx23885 driver version 0.0.3 loaded
  832. [ 6.162080] IR NEC protocol handler initialized
  833. [ 6.167041] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
  834. [ 6.167097] cx23885 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
  835. [ 6.168104] CORE cx23885[0]: subsystem: 6981:8888, board: TurboSight TBS 6981 [card=33,autodetected]
  836. [ 6.174701] IR RC5(x) protocol handler initialized
  837. [ 6.218867] VGA switcheroo: detected Optimus DSM method \ handle
  838. [ 6.219611] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20
  839. [ 6.219628] nouveau 0000:03:00.0: PCI INT A -> Link[SGRU] -> GSI 20 (level, low) -> IRQ 20
  840. [ 6.219642] nouveau 0000:03:00.0: setting latency timer to 64
  841. [ 6.228718] [drm] nouveau 0000:03:00.0: Detected an NV50 generation card (0x0ace80b1)
  842. [ 6.243672] [drm] nouveau 0000:03:00.0: Attempting to load BIOS image from PRAMIN
  843. [ 6.314048] [drm] nouveau 0000:03:00.0: ... appears to be valid
  844. [ 6.314060] [drm] nouveau 0000:03:00.0: BIT BIOS found
  845. [ 6.314071] [drm] nouveau 0000:03:00.0: Bios version 62.79.65.00
  846. [ 6.314082] [drm] nouveau 0000:03:00.0: TMDS table version 2.0
  847. [ 6.314089] [drm] nouveau 0000:03:00.0: Found Display Configuration Block version 4.0
  848. [ 6.314100] [drm] nouveau 0000:03:00.0: Raw DCB entry 0: 02000300 0000001e
  849. [ 6.314110] [drm] nouveau 0000:03:00.0: Raw DCB entry 1: 01011322 00020030
  850. [ 6.314119] [drm] nouveau 0000:03:00.0: Raw DCB entry 2: 02022332 00020010
  851. [ 6.314127] [drm] nouveau 0000:03:00.0: Raw DCB entry 3: 0000000e 00000000
  852. [ 6.314138] [drm] nouveau 0000:03:00.0: DCB connector table: VHER 0x40 5 16 4
  853. [ 6.314148] [drm] nouveau 0000:03:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff
  854. [ 6.314158] [drm] nouveau 0000:03:00.0: 1: 0x00001131: type 0x31 idx 1 tag 0x07
  855. [ 6.314167] [drm] nouveau 0000:03:00.0: 2: 0x00002261: type 0x61 idx 2 tag 0x08
  856. [ 6.314179] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 0 at offset 0xDEEA
  857. [ 6.398736] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 1 at offset 0xE1C2
  858. [ 6.398746] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 2 at offset 0xE1C4
  859. [ 6.398762] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 3 at offset 0xE285
  860. [ 6.398783] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 4 at offset 0xE34A
  861. [ 6.398791] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table at offset 0xE3AF
  862. [ 6.418647] [drm] nouveau 0000:03:00.0: 0xE3AF: Condition still not met after 20ms, skipping following opcodes
  863. [ 6.421287] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 18
  864. [ 6.421335] ath9k 0000:04:00.0: PCI INT A -> Link[LN3A] -> GSI 18 (level, low) -> IRQ 18
  865. [ 6.421357] ath9k 0000:04:00.0: setting latency timer to 64
  866. [ 6.471268] ath: EEPROM regdomain: 0x60
  867. [ 6.471277] ath: EEPROM indicates we should expect a direct regpair map
  868. [ 6.471288] ath: Country alpha2 being used: 00
  869. [ 6.471294] ath: Regpair used: 0x60
  870. [ 6.472564] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
  871. [ 6.472578] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
  872. [ 6.472587] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
  873. [ 6.472596] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
  874. [ 6.472604] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
  875. [ 6.472614] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
  876. [ 6.472622] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
  877. [ 6.472632] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
  878. [ 6.472640] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
  879. [ 6.472650] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
  880. [ 6.472658] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
  881. [ 6.472668] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
  882. [ 6.472676] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
  883. [ 6.472686] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
  884. [ 6.472694] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
  885. [ 6.472704] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
  886. [ 6.472712] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
  887. [ 6.472721] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
  888. [ 6.472729] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
  889. [ 6.472739] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
  890. [ 6.472748] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
  891. [ 6.472770] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
  892. [ 6.472779] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
  893. [ 6.472789] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
  894. [ 6.472797] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
  895. [ 6.472806] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
  896. [ 6.472814] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
  897. [ 6.472824] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
  898. [ 6.475667] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
  899. [ 6.513581] [drm] nouveau 0000:03:00.0: 4 available performance level(s)
  900. [ 6.513598] [drm] nouveau 0000:03:00.0: 0: core 200MHz shader 400MHz voltage 1010mV fanspeed 60%
  901. [ 6.513612] [drm] nouveau 0000:03:00.0: 1: core 300MHz shader 600MHz voltage 1010mV fanspeed 100%
  902. [ 6.513625] [drm] nouveau 0000:03:00.0: 2: core 350MHz shader 800MHz voltage 1010mV fanspeed 100%
  903. [ 6.513638] [drm] nouveau 0000:03:00.0: 3: core 450MHz shader 1100MHz voltage 1010mV fanspeed 100%
  904. [ 6.513661] [drm] nouveau 0000:03:00.0: c: core 450MHz shader 1100MHz
  905. [ 6.520622] [TTM] Zone kernel: Available graphics memory: 438062 kiB.
  906. [ 6.520632] [TTM] Zone highmem: Available graphics memory: 900722 kiB.
  907. [ 6.520639] [TTM] Initializing pool allocator.
  908. [ 6.520673] [drm] nouveau 0000:03:00.0: Detected 256MiB VRAM
  909. [ 6.520681] [drm] nouveau 0000:03:00.0: Stolen system memory at: 0x0070000000
  910. [ 6.874470] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
  911. [ 6.879296] Registered led device: ath9k-phy0
  912. [ 6.879341] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8200000, irq=18
  913. [ 6.889059] [drm] nouveau 0000:03:00.0: 64 MiB GART (aperture)
  914. [ 6.899879] IR RC6 protocol handler initialized
  915. [ 6.949992] IR JVC protocol handler initialized
  916. [ 6.958929] IR Sony protocol handler initialized
  917. [ 6.998942] IR MCE Keyboard/mouse protocol handler initialized
  918. [ 7.002604] Bluetooth: Core ver 2.16
  919. [ 7.002694] NET: Registered protocol family 31
  920. [ 7.002703] Bluetooth: HCI device and connection manager initialized
  921. [ 7.002712] Bluetooth: HCI socket layer initialized
  922. [ 7.002720] Bluetooth: L2CAP socket layer initialized
  923. [ 7.002738] Bluetooth: SCO socket layer initialized
  924. [ 7.007005] ppdev: user-space parallel port driver
  925. [ 7.037320] cx25840 4-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
  926. [ 7.064620] lirc_dev: IR Remote Control driver registered, major 249
  927. [ 7.065242] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  928. [ 7.065254] Bluetooth: BNEP filters: protocol multicast
  929. [ 7.066575] IR LIRC bridge handler initialized
  930. [ 7.075689] Bluetooth: RFCOMM TTY layer initialized
  931. [ 7.075713] Bluetooth: RFCOMM socket layer initialized
  932. [ 7.075735] Bluetooth: RFCOMM ver 1.11
  933. [ 7.127380] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
  934. [ 7.127398] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
  935. [ 7.128211] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
  936. [ 7.128229] snd_hda_intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23
  937. [ 7.128240] hda_intel: Disabling MSI
  938. [ 7.128308] snd_hda_intel 0000:00:08.0: setting latency timer to 64
  939. [ 7.152940] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  940. [ 7.152951] [drm] No driver support for vblank timestamp query.
  941. [ 7.373225] [drm] nouveau 0000:03:00.0: allocated 1152x864 fb: 0x2f0000, bo f32b8200
  942. [ 7.378706] init: failsafe main process (762) killed by TERM signal
  943. [ 7.381941] fbcon: nouveaufb (fb0) is primary device
  944. [ 7.382351] Console: switching to colour frame buffer device 144x54
  945. [ 7.382467] fb0: nouveaufb frame buffer device
  946. [ 7.382473] drm: registered panic notifier
  947. [ 7.382501] [drm] Initialized nouveau 0.0.16 20090420 for 0000:03:00.0 on minor 0
  948. [ 7.550983] forcedeth 0000:00:0a.0: eth1: no link during initialization
  949. [ 7.556777] ADDRCONF(NETDEV_UP): eth1: link is not ready
  950. [ 7.558644] ADDRCONF(NETDEV_UP): eth1: link is not ready
  951. [ 7.622874] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  952. [ 7.625237] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  953. [ 7.728728] ata1.00: exception Emask 0x10 SAct 0x1 SErr 0x1990000 action 0xe frozen
  954. [ 7.728744] ata1.00: irq_stat 0x08400000, interface fatal error, PHY RDY changed
  955. [ 7.728758] ata1: SError: { PHYRdyChg 10B8B Dispar LinkSeq TrStaTrns }
  956. [ 7.728772] ata1.00: failed command: READ FPDMA QUEUED
  957. [ 7.728795] ata1.00: cmd 60/00:00:b0:e1:91/01:00:00:00:00/40 tag 0 ncq 131072 in
  958. [ 7.728800] res 40/00:00:b0:e1:91/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
  959. [ 7.728812] ata1.00: status: { DRDY }
  960. [ 7.728831] ata1: hard resetting link
  961. [ 8.452045] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  962. [ 8.473254] ata1.00: configured for UDMA/133
  963. [ 8.473280] ata1: EH complete
  964. [ 8.576062] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
  965. [ 8.576078] cfg80211: World regulatory domain updated:
  966. [ 8.576086] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  967. [ 8.576097] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  968. [ 8.576106] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  969. [ 8.576116] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  970. [ 8.576126] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  971. [ 8.576136] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  972. [ 9.149110] cx25840 4-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
  973. [ 9.156743] cx23885_dvb_register() allocating 1 frontend(s)
  974. [ 9.156755] cx23885[0]: cx23885 based dvb card
  975. [ 9.163943] tbs6981fe: module license 'TurboSight Proprietary: www.tbsdtv.com' taints kernel.
  976. [ 9.163952] Disabling lock debugging due to kernel taint
  977. [ 9.165525] TurboSight TBS 6981 Frontend 0 Attaching...
  978. [ 9.249210] DVB: registering new adapter (cx23885[0])
  979. [ 9.249224] DVB: registering adapter 0 frontend 0 (TurboSight TBS 6981 DVBS/S2 frontend)...
  980. [ 9.278827] TurboSight TBS698x Dual DVB-S2 card port0 MAC=00:22:ab:f0:41:20
  981. [ 9.278838] cx23885_dvb_register() allocating 1 frontend(s)
  982. [ 9.280127] cx23885[0]: cx23885 based dvb card
  983. [ 9.280155] TurboSight TBS 6981 Frontend 1 Attaching...
  984. [ 9.360102] DVB: registering new adapter (cx23885[0])
  985. [ 9.360122] DVB: registering adapter 1 frontend 0 (TurboSight TBS 6981 DVBS/S2 frontend)...
  986. [ 9.388785] TurboSight TBS698x Dual DVB-S2 card port1 MAC=00:22:ab:f0:41:21
  987. [ 9.388797] cx23885_dev_checkrevision() Hardware revision = 0xa5
  988. [ 9.388810] cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 19, latency: 0, mmio: 0xfac00000
  989. [ 9.388825] cx23885 0000:02:00.0: setting latency timer to 64
  990. [ 9.404372] input: HDA NVidia Line as /devices/pci0000:00/0000:00:08.0/sound/card0/input4
  991. [ 9.404756] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input5
  992. [ 9.405165] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input6
  993. [ 9.405531] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
  994. [ 9.405965] input: HDA NVidia Line-Out as /devices/pci0000:00/0000:00:08.0/sound/card0/input8
  995. [ 9.418563] Registered IR keymap rc-tbs-nec
  996. [ 9.420819] input: cx23885 IR (TurboSight TBS 6981) as /devices/pci0000:00/0000:00:0c.0/0000:02:00.0/rc/rc0/input9
  997. [ 9.433060] rc0: cx23885 IR (TurboSight TBS 6981) as /devices/pci0000:00/0000:00:0c.0/0000:02:00.0/rc/rc0
  998. [ 9.438444] input: MCE IR Keyboard/Mouse (cx23885) as /devices/virtual/input/input10
  999. [ 9.438976] rc rc0: lirc_dev: driver ir-lirc-codec (cx23885) registered at minor = 0
  1000. [ 11.418052] wlan0: authenticate with 00:24:fe:02:d9:51 (try 1)
  1001. [ 11.421019] wlan0: authenticated
  1002. [ 11.452385] wlan0: associate with 00:24:fe:02:d9:51 (try 1)
  1003. [ 11.454840] wlan0: RX AssocResp from 00:24:fe:02:d9:51 (capab=0x431 status=0 aid=2)
  1004. [ 11.454848] wlan0: associated
  1005. [ 11.455543] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1006. [ 12.194689] ata1: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0xe frozen
  1007. [ 12.194702] ata1: irq_stat 0x00400000, PHY RDY changed
  1008. [ 12.194712] ata1: SError: { PHYRdyChg 10B8B Dispar LinkSeq TrStaTrns }
  1009. [ 12.194728] ata1: hard resetting link
  1010. [ 12.916042] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  1011. [ 12.937429] ata1.00: configured for UDMA/133
  1012. [ 12.937835] ata1: EH complete
  1013. [ 14.193240] ata1: limiting SATA link speed to 1.5 Gbps
  1014. [ 14.193252] ata1.00: exception Emask 0x10 SAct 0x1 SErr 0x1990000 action 0xe frozen
  1015. [ 14.193261] ata1.00: irq_stat 0x00400000, PHY RDY changed
  1016. [ 14.193269] ata1: SError: { PHYRdyChg 10B8B Dispar LinkSeq TrStaTrns }
  1017. [ 14.193278] ata1.00: failed command: READ FPDMA QUEUED
  1018. [ 14.193294] ata1.00: cmd 60/08:00:30:c8:72/00:00:03:00:00/40 tag 0 ncq 4096 in
  1019. [ 14.193298] res 40/00:00:30:6f:4c/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
  1020. [ 14.193305] ata1.00: status: { DRDY }
  1021. [ 14.193317] ata1: hard resetting link
  1022. [ 14.980045] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  1023. [ 15.001550] ata1.00: configured for UDMA/133
  1024. [ 15.002010] ata1: EH complete
  1025. [ 18.168144] ata1: exception Emask 0x10 SAct 0x0 SErr 0x1810000 action 0xe frozen
  1026. [ 18.168160] ata1: irq_stat 0x00400000, PHY RDY changed
  1027. [ 18.168173] ata1: SError: { PHYRdyChg LinkSeq TrStaTrns }
  1028. [ 18.168193] ata1: hard resetting link
  1029. [ 18.956047] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  1030. [ 18.977437] ata1.00: configured for UDMA/133
  1031. [ 18.977865] ata1: EH complete
  1032. [ 22.232070] wlan0: no IPv6 routers present
  1033. [ 23.442253] ata1: exception Emask 0x10 SAct 0x0 SErr 0x1810000 action 0xe frozen
  1034. [ 23.442268] ata1: irq_stat 0x00400000, PHY RDY changed
  1035. [ 23.442280] ata1: SError: { PHYRdyChg LinkSeq TrStaTrns }
  1036. [ 23.442299] ata1: hard resetting link
  1037. [ 24.164057] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  1038. [ 24.185319] ata1.00: configured for UDMA/133
  1039. [ 24.185749] ata1: EH complete
  1040. [ 31.226848] ata1.00: exception Emask 0x10 SAct 0xc0 SErr 0x1810000 action 0xe frozen
  1041. [ 31.226864] ata1.00: irq_stat 0x08400000, interface fatal error, PHY RDY changed
  1042. [ 31.226877] ata1: SError: { PHYRdyChg LinkSeq TrStaTrns }
  1043. [ 31.226889] ata1.00: failed command: WRITE FPDMA QUEUED
  1044. [ 31.226911] ata1.00: cmd 61/00:30:f0:f1:54/04:00:03:00:00/40 tag 6 ncq 524288 out
  1045. [ 31.226915] res 40/00:30:f0:f1:54/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1046. [ 31.226926] ata1.00: status: { DRDY }
  1047. [ 31.226936] ata1.00: failed command: WRITE FPDMA QUEUED
  1048. [ 31.226957] ata1.00: cmd 61/10:38:f0:f5:54/00:00:03:00:00/40 tag 7 ncq 8192 out
  1049. [ 31.226962] res 40/00:30:f0:f1:54/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1050. [ 31.226973] ata1.00: status: { DRDY }
  1051. [ 31.226990] ata1: hard resetting link
  1052. [ 31.948041] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  1053. [ 31.969719] ata1.00: configured for UDMA/133
  1054. [ 31.970142] ata1: EH complete
  1055. [ 210.902145] ata1.00: limiting speed to UDMA/100:PIO4
  1056. [ 210.902161] ata1: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0xe frozen
  1057. [ 210.902172] ata1: irq_stat 0x00400000, PHY RDY changed
  1058. [ 210.902182] ata1: SError: { PHYRdyChg 10B8B Dispar LinkSeq TrStaTrns }
  1059. [ 210.902199] ata1: hard resetting link
  1060. [ 211.624051] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  1061. [ 211.645694] ata1.00: configured for UDMA/100
  1062. [ 211.646123] ata1: EH complete
  1063. [ 213.931365] ata1.00: exception Emask 0x10 SAct 0x3 SErr 0x1990000 action 0xe frozen
  1064. [ 213.931376] ata1.00: irq_stat 0x08400000, interface fatal error, PHY RDY changed
  1065. [ 213.931386] ata1: SError: { PHYRdyChg 10B8B Dispar LinkSeq TrStaTrns }
  1066. [ 213.931394] ata1.00: failed command: READ FPDMA QUEUED
  1067. [ 213.931410] ata1.00: cmd 60/b8:00:90:ba:56/00:00:03:00:00/40 tag 0 ncq 94208 in
  1068. [ 213.931414] res 40/00:08:98:bb:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1069. [ 213.931421] ata1.00: status: { DRDY }
  1070. [ 213.931428] ata1.00: failed command: READ FPDMA QUEUED
  1071. [ 213.931443] ata1.00: cmd 60/48:08:98:bb:56/01:00:03:00:00/40 tag 1 ncq 167936 in
  1072. [ 213.931446] res 40/00:08:98:bb:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1073. [ 213.931454] ata1.00: status: { DRDY }
  1074. [ 213.931465] ata1: hard resetting link
  1075. [ 215.228039] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  1076. [ 215.249479] ata1.00: configured for UDMA/100
  1077. [ 215.249921] ata1: EH complete
  1078. [ 326.023319] ata1: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0xe frozen
  1079. [ 326.023329] ata1: irq_stat 0x00400000, PHY RDY changed
  1080. [ 326.023338] ata1: SError: { PHYRdyChg 10B8B Dispar LinkSeq TrStaTrns }
  1081. [ 326.023350] ata1: hard resetting link
  1082. [ 326.744046] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  1083. [ 326.765644] ata1.00: configured for UDMA/100
  1084. [ 326.766071] ata1: EH complete
  1085. [ 334.383910] ata1.00: exception Emask 0x10 SAct 0x7fffffff SErr 0x1990000 action 0xe frozen
  1086. [ 334.383925] ata1.00: irq_stat 0x08400000, interface fatal error, PHY RDY changed
  1087. [ 334.383939] ata1: SError: { PHYRdyChg 10B8B Dispar LinkSeq TrStaTrns }
  1088. [ 334.383952] ata1.00: failed command: WRITE FPDMA QUEUED
  1089. [ 334.383975] ata1.00: cmd 61/c0:00:20:4c:56/01:00:03:00:00/40 tag 0 ncq 229376 out
  1090. [ 334.383979] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1091. [ 334.383991] ata1.00: status: { DRDY }
  1092. [ 334.384001] ata1.00: failed command: WRITE FPDMA QUEUED
  1093. [ 334.384052] ata1.00: cmd 61/08:08:f0:4d:56/00:00:03:00:00/40 tag 1 ncq 4096 out
  1094. [ 334.384057] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1095. [ 334.384068] ata1.00: status: { DRDY }
  1096. [ 334.384077] ata1.00: failed command: WRITE FPDMA QUEUED
  1097. [ 334.384096] ata1.00: cmd 61/00:10:00:4e:56/04:00:03:00:00/40 tag 2 ncq 524288 out
  1098. [ 334.384100] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1099. [ 334.384110] ata1.00: status: { DRDY }
  1100. [ 334.384119] ata1.00: failed command: WRITE FPDMA QUEUED
  1101. [ 334.384138] ata1.00: cmd 61/08:18:38:88:56/00:00:03:00:00/40 tag 3 ncq 4096 out
  1102. [ 334.384142] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1103. [ 334.384152] ata1.00: status: { DRDY }
  1104. [ 334.384160] ata1.00: failed command: WRITE FPDMA QUEUED
  1105. [ 334.384179] ata1.00: cmd 61/10:20:a8:88:56/00:00:03:00:00/40 tag 4 ncq 8192 out
  1106. [ 334.384183] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1107. [ 334.384193] ata1.00: status: { DRDY }
  1108. [ 334.384201] ata1.00: failed command: WRITE FPDMA QUEUED
  1109. [ 334.384221] ata1.00: cmd 61/08:28:e8:88:56/00:00:03:00:00/40 tag 5 ncq 4096 out
  1110. [ 334.384225] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1111. [ 334.384234] ata1.00: status: { DRDY }
  1112. [ 334.384243] ata1.00: failed command: WRITE FPDMA QUEUED
  1113. [ 334.384262] ata1.00: cmd 61/08:30:58:89:56/00:00:03:00:00/40 tag 6 ncq 4096 out
  1114. [ 334.384266] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1115. [ 334.384276] ata1.00: status: { DRDY }
  1116. [ 334.384284] ata1.00: failed command: WRITE FPDMA QUEUED
  1117. [ 334.384304] ata1.00: cmd 61/10:38:80:89:56/00:00:03:00:00/40 tag 7 ncq 8192 out
  1118. [ 334.384308] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1119. [ 334.384317] ata1.00: status: { DRDY }
  1120. [ 334.384326] ata1.00: failed command: WRITE FPDMA QUEUED
  1121. [ 334.384345] ata1.00: cmd 61/58:40:80:8f:56/02:00:03:00:00/40 tag 8 ncq 307200 out
  1122. [ 334.384349] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1123. [ 334.384359] ata1.00: status: { DRDY }
  1124. [ 334.384367] ata1.00: failed command: WRITE FPDMA QUEUED
  1125. [ 334.384387] ata1.00: cmd 61/08:48:e8:91:56/00:00:03:00:00/40 tag 9 ncq 4096 out
  1126. [ 334.384391] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1127. [ 334.384400] ata1.00: status: { DRDY }
  1128. [ 334.384409] ata1.00: failed command: WRITE FPDMA QUEUED
  1129. [ 334.384428] ata1.00: cmd 61/38:50:f8:91:56/03:00:03:00:00/40 tag 10 ncq 421888 out
  1130. [ 334.384432] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1131. [ 334.384442] ata1.00: status: { DRDY }
  1132. [ 334.384451] ata1.00: failed command: WRITE FPDMA QUEUED
  1133. [ 334.384470] ata1.00: cmd 61/38:58:b8:95:56/00:00:03:00:00/40 tag 11 ncq 28672 out
  1134. [ 334.384474] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1135. [ 334.384484] ata1.00: status: { DRDY }
  1136. [ 334.384492] ata1.00: failed command: WRITE FPDMA QUEUED
  1137. [ 334.384512] ata1.00: cmd 61/b0:60:40:9a:56/03:00:03:00:00/40 tag 12 ncq 483328 out
  1138. [ 334.384516] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1139. [ 334.384525] ata1.00: status: { DRDY }
  1140. [ 334.384534] ata1.00: failed command: WRITE FPDMA QUEUED
  1141. [ 334.384553] ata1.00: cmd 61/f0:68:40:a0:56/01:00:03:00:00/40 tag 13 ncq 253952 out
  1142. [ 334.384558] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1143. [ 334.384567] ata1.00: status: { DRDY }
  1144. [ 334.384576] ata1.00: failed command: WRITE FPDMA QUEUED
  1145. [ 334.384595] ata1.00: cmd 61/a8:70:d0:a2:56/00:00:03:00:00/40 tag 14 ncq 86016 out
  1146. [ 334.384599] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1147. [ 334.384609] ata1.00: status: { DRDY }
  1148. [ 334.384617] ata1.00: failed command: WRITE FPDMA QUEUED
  1149. [ 334.384637] ata1.00: cmd 61/70:78:40:a4:56/00:00:03:00:00/40 tag 15 ncq 57344 out
  1150. [ 334.384641] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1151. [ 334.384650] ata1.00: status: { DRDY }
  1152. [ 334.384659] ata1.00: failed command: WRITE FPDMA QUEUED
  1153. [ 334.384678] ata1.00: cmd 61/00:80:40:a5:56/04:00:03:00:00/40 tag 16 ncq 524288 out
  1154. [ 334.384682] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1155. [ 334.384692] ata1.00: status: { DRDY }
  1156. [ 334.384700] ata1.00: failed command: WRITE FPDMA QUEUED
  1157. [ 334.384719] ata1.00: cmd 61/00:88:40:a9:56/04:00:03:00:00/40 tag 17 ncq 524288 out
  1158. [ 334.384724] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1159. [ 334.384733] ata1.00: status: { DRDY }
  1160. [ 334.384742] ata1.00: failed command: WRITE FPDMA QUEUED
  1161. [ 334.384761] ata1.00: cmd 61/b0:90:40:ad:56/00:00:03:00:00/40 tag 18 ncq 90112 out
  1162. [ 334.384765] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1163. [ 334.384775] ata1.00: status: { DRDY }
  1164. [ 334.384783] ata1.00: failed command: WRITE FPDMA QUEUED
  1165. [ 334.384802] ata1.00: cmd 61/70:98:c0:af:56/00:00:03:00:00/40 tag 19 ncq 57344 out
  1166. [ 334.384807] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1167. [ 334.384816] ata1.00: status: { DRDY }
  1168. [ 334.384825] ata1.00: failed command: WRITE FPDMA QUEUED
  1169. [ 334.384844] ata1.00: cmd 61/38:a0:78:b0:56/00:00:03:00:00/40 tag 20 ncq 28672 out
  1170. [ 334.384848] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1171. [ 334.384858] ata1.00: status: { DRDY }
  1172. [ 334.384866] ata1.00: failed command: WRITE FPDMA QUEUED
  1173. [ 334.384885] ata1.00: cmd 61/f8:a8:38:b1:56/00:00:03:00:00/40 tag 21 ncq 126976 out
  1174. [ 334.384890] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1175. [ 334.384899] ata1.00: status: { DRDY }
  1176. [ 334.384908] ata1.00: failed command: WRITE FPDMA QUEUED
  1177. [ 334.384927] ata1.00: cmd 61/00:b0:00:79:56/04:00:03:00:00/40 tag 22 ncq 524288 out
  1178. [ 334.384931] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1179. [ 334.384941] ata1.00: status: { DRDY }
  1180. [ 334.384949] ata1.00: failed command: WRITE FPDMA QUEUED
  1181. [ 334.384968] ata1.00: cmd 61/00:b8:00:7d:56/04:00:03:00:00/40 tag 23 ncq 524288 out
  1182. [ 334.384973] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1183. [ 334.384982] ata1.00: status: { DRDY }
  1184. [ 334.384991] ata1.00: failed command: WRITE FPDMA QUEUED
  1185. [ 334.385010] ata1.00: cmd 61/28:c0:00:81:56/02:00:03:00:00/40 tag 24 ncq 282624 out
  1186. [ 334.385014] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1187. [ 334.385024] ata1.00: status: { DRDY }
  1188. [ 334.385032] ata1.00: failed command: WRITE FPDMA QUEUED
  1189. [ 334.385051] ata1.00: cmd 61/00:c8:30:83:56/04:00:03:00:00/40 tag 25 ncq 524288 out
  1190. [ 334.385056] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1191. [ 334.385065] ata1.00: status: { DRDY }
  1192. [ 334.385074] ata1.00: failed command: WRITE FPDMA QUEUED
  1193. [ 334.385093] ata1.00: cmd 61/d0:d0:30:87:56/00:00:03:00:00/40 tag 26 ncq 106496 out
  1194. [ 334.385097] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1195. [ 334.385107] ata1.00: status: { DRDY }
  1196. [ 334.385115] ata1.00: failed command: WRITE FPDMA QUEUED
  1197. [ 334.385134] ata1.00: cmd 61/08:d8:08:88:56/00:00:03:00:00/40 tag 27 ncq 4096 out
  1198. [ 334.385138] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1199. [ 334.385148] ata1.00: status: { DRDY }
  1200. [ 334.385157] ata1.00: failed command: WRITE FPDMA QUEUED
  1201. [ 334.385176] ata1.00: cmd 61/08:e0:20:88:56/00:00:03:00:00/40 tag 28 ncq 4096 out
  1202. [ 334.385180] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1203. [ 334.385189] ata1.00: status: { DRDY }
  1204. [ 334.385198] ata1.00: failed command: WRITE FPDMA QUEUED
  1205. [ 334.385217] ata1.00: cmd 61/10:e8:68:88:56/00:00:03:00:00/40 tag 29 ncq 8192 out
  1206. [ 334.385221] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1207. [ 334.385231] ata1.00: status: { DRDY }
  1208. [ 334.385239] ata1.00: failed command: WRITE FPDMA QUEUED
  1209. [ 334.385259] ata1.00: cmd 61/08:f0:90:88:56/00:00:03:00:00/40 tag 30 ncq 4096 out
  1210. [ 334.385263] res 40/00:b8:00:7d:56/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
  1211. [ 334.385272] ata1.00: status: { DRDY }
  1212. [ 334.385286] ata1: hard resetting link
  1213. [ 335.108072] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  1214. [ 335.129507] ata1.00: configured for UDMA/100
  1215. [ 335.129966] ata1: EH complete
  1216. knap@mint ~ $
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!