Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.5.2 (root@b) (gcc version 4.7.1 (GCC) ) #8 SMP Tue Sep 11 15:46:55 MSK 2012
- [ 0.000000] Command line: auto BOOT_IMAGE=debug ro root=802 vt.default_utf8=0
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffaffff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000007ffb0000-0x000000007ffbffff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x000000007ffc0000-0x000000007ffeffff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI 2.3 present.
- [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./A8V Deluxe, BIOS 1018.002 08/16/2007
- [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] AGP bridge at 00:00:00
- [ 0.000000] Aperture from AGP @ ec000000 old size 32 MB
- [ 0.000000] Aperture from AGP @ ec000000 size 64 MB (APSIZE f30)
- [ 0.000000] e820: last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
- [ 0.000000] 1 base 00EC000000 mask FFFC000000 write-combining
- [ 0.000000] 2 disabled
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
- [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
- [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x7ffaffff]
- [ 0.000000] [mem 0x00000000-0x7fdfffff] page 2M
- [ 0.000000] [mem 0x7fe00000-0x7ffaffff] page 4k
- [ 0.000000] kernel direct mapping tables up to 0x7ffaffff @ [mem 0x1fbfd000-0x1fffffff]
- [ 0.000000] ACPI: RSDP 00000000000fa7c0 00014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT 000000007ffb0000 00030 (v01 A M I OEMRSDT 08000716 MSFT 00000097)
- [ 0.000000] ACPI: FACP 000000007ffb0200 00081 (v01 A M I OEMFACP 08000716 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 000000007ffb03f0 03A3E (v01 A0036 A0036001 00000001 MSFT 0100000D)
- [ 0.000000] ACPI: FACS 000000007ffc0000 00040
- [ 0.000000] ACPI: APIC 000000007ffb0390 00052 (v01 A M I OEMAPIC 08000716 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 000000007ffc0040 0003F (v01 A M I OEMBIOS 08000716 MSFT 00000097)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
- [ 0.000000] node 0: [mem 0x00100000-0x7ffaffff]
- [ 0.000000] On node 0 totalpages: 524095
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 8 pages reserved
- [ 0.000000] DMA zone: 3911 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 8127 pages used for memmap
- [ 0.000000] DMA32 zone: 511985 pages, LIFO batch:31
- [ 0.000000] Detected use of extended apic ids on hypertransport bus
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
- [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
- [ 0.000000] e820: [mem 0x80000000-0xff77ffff] available for PCI devices
- [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s79104 r8192 d23296 u1048576
- [ 0.000000] pcpu-alloc: s79104 r8192 d23296 u1048576 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515896
- [ 0.000000] Kernel command line: auto BOOT_IMAGE=debug ro root=802 vt.default_utf8=0
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Checking aperture...
- [ 0.000000] AGP bridge at 00:00:00
- [ 0.000000] Aperture from AGP @ ec000000 old size 32 MB
- [ 0.000000] Aperture from AGP @ ec000000 size 64 MB (APSIZE f30)
- [ 0.000000] Node 0: aperture @ ec000000 size 64 MB
- [ 0.000000] Memory: 2030716k/2096832k available (11592k kernel code, 452k absent, 65664k reserved, 5906k data, 872k init)
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
- [ 0.000000] NR_IRQS:4352 nr_irqs:512 16
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
- [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
- [ 0.000000] ... MAX_LOCK_DEPTH: 48
- [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
- [ 0.000000] ... CLASSHASH_SIZE: 4096
- [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
- [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
- [ 0.000000] ... CHAINHASH_SIZE: 16384
- [ 0.000000] memory used by lock dependency info: 5855 kB
- [ 0.000000] per task-struct memory footprint: 1920 bytes
- [ 0.000000] allocated 8388608 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] ODEBUG: 0 of 0 active objects replaced
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2202.821 MHz processor.
- [ 0.000000] Marking TSC unstable due to TSCs unsynchronized
- [ 0.001009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4405.64 BogoMIPS (lpj=2202821)
- [ 0.001020] pid_max: default: 32768 minimum: 301
- [ 0.001103] Security Framework initialized
- [ 0.001135] Mount-cache hash table entries: 256
- [ 0.002428] Initializing cgroup subsys cpuacct
- [ 0.002438] Initializing cgroup subsys memory
- [ 0.002483] Initializing cgroup subsys devices
- [ 0.002491] Initializing cgroup subsys freezer
- [ 0.002498] Initializing cgroup subsys net_cls
- [ 0.002505] Initializing cgroup subsys blkio
- [ 0.002512] Initializing cgroup subsys perf_event
- [ 0.002579] tseg: 0000000000
- [ 0.002646] CPU: Physical Processor ID: 0
- [ 0.002650] CPU: Processor Core ID: 0
- [ 0.002655] mce: CPU supports 5 MCE banks
- [ 0.002716] ACPI: Core revision 20120320
- [ 0.006401] ftrace: allocating 35223 entries in 138 pages
- [ 0.021998] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
- [ 0.031547] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
- [ 0.031997] Performance Events: AMD PMU driver.
- [ 0.031997] ... version: 0
- [ 0.031997] ... bit width: 48
- [ 0.031997] ... generic registers: 4
- [ 0.031997] ... value mask: 0000ffffffffffff
- [ 0.031997] ... max period: 00007fffffffffff
- [ 0.031997] ... fixed-purpose events: 0
- [ 0.031997] ... event mask: 000000000000000f
- [ 0.031997] MCE: In-kernel MCE decoding enabled.
- [ 0.031997] lockdep: fixing up alternatives.
- [ 0.031997] Booting Node 0, Processors #1 Ok.
- [ 0.102048] Brought up 2 CPUs
- [ 0.102053] Total of 2 processors activated (8810.63 BogoMIPS).
- [ 0.103313] devtmpfs: initialized
- [ 0.106354] PM: Registering ACPI NVS region [mem 0x7ffc0000-0x7ffeffff] (196608 bytes)
- [ 0.106354] xor: automatically using best checksumming function:
- [ 0.115992] generic_sse: 7048.000 MB/sec
- [ 0.116002] atomic64 test passed for x86-64 platform with CX8 and with SSE
- [ 0.117081] dummy:
- [ 0.117260] NET: Registered protocol family 16
- [ 0.118081] node 0 link 0: io port [1000, ffffff]
- [ 0.118081] TOM: 0000000080000000 aka 2048M
- [ 0.118090] node 0 link 0: mmio [a0000, bffff]
- [ 0.118093] node 0 link 0: mmio [80000000, ffffffff]
- [ 0.118097] bus: [00, ff] on node 0 link 0
- [ 0.118100] bus: 00 [io 0x0000-0xffff]
- [ 0.118102] bus: 00 [mem 0x000a0000-0x000bffff]
- [ 0.118104] bus: 00 [mem 0x80000000-0xfcffffffff]
- [ 0.118205] ACPI: bus type pci registered
- [ 0.118234] PCI: Using configuration type 1 for base access
- [ 0.162086] bio: create slab <bio-0> at 0
- [ 0.179931] raid6: sse2x1 746 MB/s
- [ 0.196992] raid6: sse2x2 886 MB/s
- [ 0.213962] raid6: sse2x4 1414 MB/s
- [ 0.213967] raid6: using algorithm sse2x4 (1414 MB/s)
- [ 0.213973] raid6: using intx1 recovery algorithm
- [ 0.214069] ACPI: Added _OSI(Module Device)
- [ 0.214069] ACPI: Added _OSI(Processor Device)
- [ 0.214069] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.214069] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.217564] ACPI: EC: Look up EC in DSDT
- [ 0.221522] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.226047] ACPI: Interpreter enabled
- [ 0.226055] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.226130] ACPI: Using IOAPIC for interrupt routing
- [ 0.242380] ACPI: No dock devices found.
- [ 0.242396] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
- [ 0.242555] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.243086] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- [ 0.243090] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
- [ 0.243093] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- [ 0.243096] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
- [ 0.243099] PCI: root bus 00: hardware-probed resources
- [ 0.243297] PCI host bridge to bus 0000:00
- [ 0.243297] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
- [ 0.243297] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.243297] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffffff]
- [ 0.243297] pci 0000:00:00.0: [1106:0282] type 00 class 0x060000
- [ 0.243297] pci 0000:00:00.0: reg 10: [mem 0xec000000-0xefffffff pref]
- [ 0.243319] pci 0000:00:00.1: [1106:1282] type 00 class 0x060000
- [ 0.243384] pci 0000:00:00.2: [1106:2282] type 00 class 0x060000
- [ 0.243448] pci 0000:00:00.3: [1106:3282] type 00 class 0x060000
- [ 0.243512] pci 0000:00:00.4: [1106:4282] type 00 class 0x060000
- [ 0.243579] pci 0000:00:00.7: [1106:7282] type 00 class 0x060000
- [ 0.244052] pci 0000:00:01.0: [1106:b188] type 01 class 0x060400
- [ 0.244124] pci 0000:00:01.0: supports D1
- [ 0.244169] pci 0000:00:07.0: [1106:3044] type 00 class 0x0c0010
- [ 0.244192] pci 0000:00:07.0: reg 10: [mem 0xfa800000-0xfa8007ff]
- [ 0.244205] pci 0000:00:07.0: reg 14: [io 0x9800-0x987f]
- [ 0.244299] pci 0000:00:07.0: supports D2
- [ 0.244303] pci 0000:00:07.0: PME# supported from D2 D3hot D3cold
- [ 0.244362] pci 0000:00:08.0: [105a:3373] type 00 class 0x010400
- [ 0.244384] pci 0000:00:08.0: reg 10: [io 0xa800-0xa83f]
- [ 0.244397] pci 0000:00:08.0: reg 14: [io 0xa400-0xa40f]
- [ 0.244411] pci 0000:00:08.0: reg 18: [io 0xa000-0xa07f]
- [ 0.244425] pci 0000:00:08.0: reg 1c: [mem 0xfaa00000-0xfaa00fff]
- [ 0.244439] pci 0000:00:08.0: reg 20: [mem 0xfa900000-0xfa91ffff]
- [ 0.244501] pci 0000:00:08.0: supports D1
- [ 0.244530] pci 0000:00:0a.0: [11ab:4320] type 00 class 0x020000
- [ 0.244557] pci 0000:00:0a.0: reg 10: [mem 0xfac00000-0xfac03fff]
- [ 0.244570] pci 0000:00:0a.0: reg 14: [io 0xb000-0xb0ff]
- [ 0.244628] pci 0000:00:0a.0: reg 30: [mem 0xfab00000-0xfab1ffff pref]
- [ 0.244678] pci 0000:00:0a.0: supports D1 D2
- [ 0.244681] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.244719] pci 0000:00:0f.0: [1106:3149] type 00 class 0x010400
- [ 0.244742] pci 0000:00:0f.0: reg 10: [io 0xd000-0xd007]
- [ 0.244756] pci 0000:00:0f.0: reg 14: [io 0xc800-0xc803]
- [ 0.244770] pci 0000:00:0f.0: reg 18: [io 0xc400-0xc407]
- [ 0.244784] pci 0000:00:0f.0: reg 1c: [io 0xc000-0xc003]
- [ 0.244798] pci 0000:00:0f.0: reg 20: [io 0xb800-0xb80f]
- [ 0.244811] pci 0000:00:0f.0: reg 24: [io 0xb400-0xb4ff]
- [ 0.244884] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
- [ 0.244947] pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f]
- [ 0.245049] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
- [ 0.245115] pci 0000:00:10.0: reg 20: [io 0xd400-0xd41f]
- [ 0.245176] pci 0000:00:10.0: supports D1 D2
- [ 0.245179] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.245207] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
- [ 0.245273] pci 0000:00:10.1: reg 20: [io 0xd800-0xd81f]
- [ 0.245334] pci 0000:00:10.1: supports D1 D2
- [ 0.245337] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.245364] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
- [ 0.245431] pci 0000:00:10.2: reg 20: [io 0xe000-0xe01f]
- [ 0.245491] pci 0000:00:10.2: supports D1 D2
- [ 0.245494] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.245524] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
- [ 0.245586] pci 0000:00:10.3: reg 20: [io 0xe400-0xe41f]
- [ 0.245645] pci 0000:00:10.3: supports D1 D2
- [ 0.245648] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.245675] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
- [ 0.245699] pci 0000:00:10.4: reg 10: [mem 0xfae00000-0xfae000ff]
- [ 0.245802] pci 0000:00:10.4: supports D1 D2
- [ 0.245805] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.245838] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
- [ 0.245930] HPET not enabled in BIOS. You might try hpet=force boot option
- [ 0.245943] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
- [ 0.246018] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
- [ 0.246041] pci 0000:00:11.5: reg 10: [io 0xe800-0xe8ff]
- [ 0.246147] pci 0000:00:11.5: supports D1 D2
- [ 0.246171] pci 0000:00:11.6: [1106:3068] type 00 class 0x078000
- [ 0.246195] pci 0000:00:11.6: reg 10: [io 0x0000-0x00ff]
- [ 0.246331] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
- [ 0.246391] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
- [ 0.246434] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
- [ 0.246481] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
- [ 0.246582] pci 0000:01:00.0: [10de:0181] type 00 class 0x030000
- [ 0.246602] pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
- [ 0.246613] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff pref]
- [ 0.246656] pci 0000:01:00.0: reg 30: [mem 0xfaf00000-0xfaf1ffff pref]
- [ 0.246749] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.246762] pci 0000:00:01.0: bridge window [mem 0xfaf00000-0xfbffffff]
- [ 0.246768] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf9ffffff pref]
- [ 0.246778] pci_bus 0000:00: on NUMA node 0
- [ 0.246785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.247446] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
- [ 0.267174] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
- [ 0.267312] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
- [ 0.267428] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
- [ 0.267544] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
- [ 0.267663] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
- [ 0.268058] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
- [ 0.268182] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
- [ 0.268302] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
- [ 0.269064] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.269074] vgaarb: loaded
- [ 0.269078] vgaarb: bridge control possible 0000:01:00.0
- [ 0.269175] SCSI subsystem initialized
- [ 0.269175] libata version 3.00 loaded.
- [ 0.269175] ACPI: bus type usb registered
- [ 0.270042] usbcore: registered new interface driver usbfs
- [ 0.270049] usbcore: registered new interface driver hub
- [ 0.270049] usbcore: registered new device driver usb
- [ 0.271000] PCI: Using ACPI for IRQ routing
- [ 0.271010] PCI: pci_cache_line_size set to 64 bytes
- [ 0.271030] pci 0000:00:00.0: address space collision: [mem 0xec000000-0xefffffff pref] conflicts with GART [mem 0xec000000-0xefffffff]
- [ 0.271218] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
- [ 0.271222] e820: reserve RAM buffer [mem 0x7ffb0000-0x7fffffff]
- [ 0.313037] pnp: PnP ACPI init
- [ 0.313094] ACPI: bus type pnp registered
- [ 0.313266] pnp 00:00: [bus 00-ff]
- [ 0.313270] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.313274] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.313277] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.313280] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.313282] pnp 00:00: [mem 0x00000000 window]
- [ 0.313285] pnp 00:00: [mem 0x80000000-0xffffffff window]
- [ 0.313417] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
- [ 0.313417] pnp 00:01: [dma 4]
- [ 0.313417] pnp 00:01: [io 0x0000-0x000f]
- [ 0.313417] pnp 00:01: [io 0x0081-0x0083]
- [ 0.313417] pnp 00:01: [io 0x0087]
- [ 0.313417] pnp 00:01: [io 0x0089-0x008b]
- [ 0.313417] pnp 00:01: [io 0x008f]
- [ 0.313417] pnp 00:01: [io 0x00c0-0x00df]
- [ 0.313417] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.313417] pnp 00:02: [io 0x0070-0x0071]
- [ 0.313417] pnp 00:02: [irq 8]
- [ 0.313417] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.313417] pnp 00:03: [io 0x0060]
- [ 0.313417] pnp 00:03: [io 0x0064]
- [ 0.313977] pnp 00:03: [irq 1]
- [ 0.314065] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- [ 0.314065] pnp 00:04: [io 0x0061]
- [ 0.314139] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.314139] pnp 00:05: [io 0x00f0-0x00ff]
- [ 0.314139] pnp 00:05: [irq 13]
- [ 0.314139] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.314996] pnp 00:06: [irq 6]
- [ 0.314999] pnp 00:06: [dma 2]
- [ 0.315002] pnp 00:06: [io 0x03f0-0x03f5]
- [ 0.315005] pnp 00:06: [io 0x03f7]
- [ 0.315110] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
- [ 0.315307] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.315310] pnp 00:07: [io 0x0680-0x06ff]
- [ 0.315313] pnp 00:07: [io 0x0290-0x0297]
- [ 0.315457] system 00:07: [io 0x0680-0x06ff] has been reserved
- [ 0.315457] system 00:07: [io 0x0290-0x0297] has been reserved
- [ 0.315457] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.315457] pnp 00:08: [io 0x0010-0x001f]
- [ 0.315457] pnp 00:08: [io 0x0022-0x003f]
- [ 0.315457] pnp 00:08: [io 0x0044-0x005f]
- [ 0.315457] pnp 00:08: [io 0x0062-0x0063]
- [ 0.315457] pnp 00:08: [io 0x0065-0x006f]
- [ 0.315457] pnp 00:08: [io 0x0072-0x007f]
- [ 0.315457] pnp 00:08: [io 0x0080]
- [ 0.315457] pnp 00:08: [io 0x0084-0x0086]
- [ 0.315457] pnp 00:08: [io 0x0088]
- [ 0.315457] pnp 00:08: [io 0x008c-0x008e]
- [ 0.315457] pnp 00:08: [io 0x0090-0x009f]
- [ 0.315457] pnp 00:08: [io 0x00a2-0x00bf]
- [ 0.315457] pnp 00:08: [io 0x00e0-0x00ef]
- [ 0.315457] pnp 00:08: [io 0x03e1-0x03e7]
- [ 0.315457] pnp 00:08: [io 0x04d0-0x04d1]
- [ 0.315457] pnp 00:08: [io 0x0800-0x087f]
- [ 0.315457] pnp 00:08: [io 0x0400-0x041f]
- [ 0.315457] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.315999] pnp 00:08: disabling [io 0x0010-0x001f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
- [ 0.316009] pnp 00:08: disabling [io 0x0022-0x003f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
- [ 0.316018] pnp 00:08: disabling [io 0x0044-0x005f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
- [ 0.316027] pnp 00:08: disabling [io 0x0062-0x0063] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
- [ 0.316036] pnp 00:08: disabling [io 0x0065-0x006f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
- [ 0.316046] pnp 00:08: disabling [io 0x0072-0x007f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
- [ 0.316054] pnp 00:08: disabling [io 0x0080] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
- [ 0.316063] pnp 00:08: disabling [io 0x0084-0x0086] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
- [ 0.316072] pnp 00:08: disabling [io 0x0088] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
- [ 0.316081] pnp 00:08: disabling [io 0x008c-0x008e] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
- [ 0.316090] pnp 00:08: disabling [io 0x0090-0x009f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
- [ 0.316099] pnp 00:08: disabling [io 0x00a2-0x00bf] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
- [ 0.316108] pnp 00:08: disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
- [ 0.316202] system 00:08: [io 0x03e1-0x03e7] has been reserved
- [ 0.316202] system 00:08: [io 0x04d0-0x04d1] has been reserved
- [ 0.316202] system 00:08: [io 0x0800-0x087f] has been reserved
- [ 0.316202] system 00:08: [io 0x0400-0x041f] has been reserved
- [ 0.316202] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.316202] pnp 00:09: [mem 0xfec00000-0xfec00fff]
- [ 0.316202] pnp 00:09: [mem 0xfee00000-0xfee00fff]
- [ 0.316202] pnp 00:09: [mem 0xfff80000-0xffffffff]
- [ 0.316296] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.316296] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.316296] system 00:09: [mem 0xfff80000-0xffffffff] has been reserved
- [ 0.316296] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.317098] pnp 00:0a: [irq 3]
- [ 0.317102] pnp 00:0a: [dma 0 disabled]
- [ 0.317105] pnp 00:0a: [io 0x02f8-0x02ff]
- [ 0.317247] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.317426] pnp 00:0b: [io 0x03f8-0x03ff]
- [ 0.317437] pnp 00:0b: [irq 4]
- [ 0.317574] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.318588] pnp 00:0c: [mem 0x00000000-0x0009ffff]
- [ 0.318591] pnp 00:0c: [mem 0x000c0000-0x000dffff]
- [ 0.318594] pnp 00:0c: [mem 0x000e0000-0x000fffff]
- [ 0.318597] pnp 00:0c: [mem 0x00100000-0x7ffeffff]
- [ 0.318600] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 0.318608] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
- [ 0.318619] pnp 00:0c: disabling [mem 0x000c0000-0x000dffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
- [ 0.318629] pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
- [ 0.318640] pnp 00:0c: disabling [mem 0x00100000-0x7ffeffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
- [ 0.318809] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.319182] pnp: PnP ACPI: found 13 devices
- [ 0.319189] ACPI: ACPI bus type pnp unregistered
- [ 0.334528] Switching to clocksource acpi_pm
- [ 0.334664] pci 0000:00:11.6: BAR 0: assigned [io 0x1000-0x10ff]
- [ 0.334678] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.334688] pci 0000:00:01.0: bridge window [mem 0xfaf00000-0xfbffffff]
- [ 0.334698] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf9ffffff pref]
- [ 0.334723] pci 0000:00:01.0: setting latency timer to 64
- [ 0.334728] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
- [ 0.334731] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
- [ 0.334734] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffffff]
- [ 0.334737] pci_bus 0000:01: resource 1 [mem 0xfaf00000-0xfbffffff]
- [ 0.334740] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff pref]
- [ 0.334818] NET: Registered protocol family 2
- [ 0.334818] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.335355] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- [ 0.337744] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
- [ 0.346787] TCP: Hash tables configured (established 262144 bind 65536)
- [ 0.346851] TCP: reno registered
- [ 0.346872] UDP hash table entries: 1024 (order: 5, 163840 bytes)
- [ 0.347214] UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes)
- [ 0.347669] NET: Registered protocol family 1
- [ 0.348022] RPC: Registered named UNIX socket transport module.
- [ 0.348037] RPC: Registered udp transport module.
- [ 0.348043] RPC: Registered tcp transport module.
- [ 0.348048] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.348147] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
- [ 0.348164] PCI: CLS mismatch (64 != 580), using 64 bytes
- [ 0.348379] pci 0000:01:00.0: Boot video device
- [ 0.350466] audit: initializing netlink socket (disabled)
- [ 0.350552] type=2000 audit(1347364748.349:1): initialized
- [ 0.363130] VFS: Disk quotas dquot_6.5.2
- [ 0.363329] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.366223] NFS: Registering the id_resolver key type
- [ 0.366360] Key type id_resolver registered
- [ 0.366366] Key type id_legacy registered
- [ 0.367131] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 0.367879] NTFS driver 2.1.30 [Flags: R/W].
- [ 0.368336] ROMFS MTD (C) 2007 Red Hat, Inc.
- [ 0.368886] JFS: nTxBlock = 8192, nTxLock = 65536
- [ 0.374975] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
- [ 0.376307] OCFS2 1.5.0
- [ 0.376600] ocfs2: Registered cluster interface o2cb
- [ 0.376612] OCFS2 DLMFS 1.5.0
- [ 0.376834] OCFS2 User DLM kernel interface loaded
- [ 0.376843] OCFS2 Node Manager 1.5.0
- [ 0.377512] OCFS2 DLM 1.5.0
- [ 0.379211] Btrfs loaded
- [ 0.379233] msgmni has been set to 3966
- [ 0.382112] async_tx: api initialized (async)
- [ 0.382403] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.382577] io scheduler noop registered
- [ 0.382589] io scheduler deadline registered
- [ 0.382809] io scheduler cfq registered (default)
- [ 0.383681] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.383984] vesafb: mode is 1024x768x16, linelength=2048, pages=1
- [ 0.383991] vesafb: scrolling: redraw
- [ 0.383997] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
- [ 0.384338] vesafb: framebuffer at 0xf0000000, mapped to 0xffffc90000700000, using 3072k, total 65536k
- [ 0.421109] Console: switching to colour frame buffer device 128x48
- [ 0.454379] fb0: VESA VGA frame buffer device
- [ 0.454932] GHES: HEST is not enabled!
- [ 0.464827] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.730289] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.995283] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 1.018249] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 1.039616] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 1.041505] Floppy drive(s): fd0 is 1.44M
- [ 1.057021] FDC 0 is a post-1991 82077
- [ 1.065506] brd: module loaded
- [ 1.065722] Compaq SMART2 Driver (v 2.6.0)
- [ 1.066426] HP CISS Driver (v 3.6.26)
- [ 1.069613] fnic: Cisco FCoE HBA Driver, ver 1.5.0.2
- [ 1.070954] Adaptec aacraid driver 1.2-0[28900]-ms
- [ 1.071797] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
- [ 1.072916] scsi: <fdomain> Detection failed (no card)
- [ 1.073457] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.04.00.03-k.
- [ 1.074171] Emulex LightPulse Fibre Channel SCSI driver 8.3.31
- [ 1.085598] Copyright(c) 2004-2009 Emulex. All rights reserved.
- [ 1.097428] Brocade BFA FC/FCOE SCSI driver - version: 3.0.23.0
- [ 1.109512] DC390: clustering now enabled by default. If you get problems load
- [ 1.121042] with "disable_clustering=1" and report to maintainers
- [ 1.132900] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
- [ 1.145026] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
- [ 1.157238] megasas: 00.00.06.15-rc1 Mon. Mar. 19 17:00:00 PDT 2012
- [ 1.169535] mpt2sas version 13.100.00.00 loaded
- [ 1.182128] GDT-HA: Storage RAID Controller Driver. Version: 3.05
- [ 1.194960] 3ware Storage Controller device driver for Linux v1.26.02.003.
- [ 1.207850] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
- [ 1.220991] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
- [ 1.234380] ipr: IBM Power RAID SCSI Device Driver version: 2.5.3 (March 10, 2012)
- [ 1.247825] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
- [ 1.261137] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
- [ 1.274940] st: Version 20101219, fixed bufsize 32768, s/g segs 256
- [ 1.290570] sata_promise 0000:00:08.0: version 2.12
- [ 1.303237] scsi0 : sata_promise
- [ 1.317341] scsi1 : sata_promise
- [ 1.330958] scsi2 : sata_promise
- [ 1.344237] ata1: SATA max UDMA/133 mmio m4096@0xfaa00000 ata 0xfaa00200 irq 18
- [ 1.357597] ata2: SATA max UDMA/133 mmio m4096@0xfaa00000 ata 0xfaa00280 irq 18
- [ 1.370769] ata3: PATA max UDMA/133 mmio m4096@0xfaa00000 ata 0xfaa00300 irq 18
- [ 1.384682] sata_via 0000:00:0f.0: version 2.6
- [ 1.384772] sata_via 0000:00:0f.0: routed to hard irq line 10
- [ 1.398684] scsi3 : sata_via
- [ 1.411534] scsi4 : sata_via
- [ 1.424057] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xc800 bmdma 0xb800 irq 20
- [ 1.436692] ata5: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb808 irq 20
- [ 1.453524] pata_via 0000:00:0f.1: version 0.3.4
- [ 1.455204] scsi5 : pata_via
- [ 1.467739] scsi6 : pata_via
- [ 1.483636] ata6: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
- [ 1.496049] ata7: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
- [ 1.509843] I2O subsystem v1.325
- [ 1.522122] i2o: max drivers = 8
- [ 1.534769] I2O Configuration OSM v1.323
- [ 1.547149] I2O Bus Adapter OSM v1.317
- [ 1.559463] I2O Block Device OSM v1.325
- [ 1.572016] I2O SCSI Peripheral OSM v1.316
- [ 1.584261] I2O ProcFS OSM v1.316
- [ 1.596375] Fusion MPT base driver 3.04.20
- [ 1.608295] Copyright (c) 1999-2008 LSI Corporation
- [ 1.620158] Fusion MPT SPI Host driver 3.04.20
- [ 1.631923] Fusion MPT FC Host driver 3.04.20
- [ 1.643420] Fusion MPT SAS Host driver 3.04.20
- [ 1.654751] Fusion MPT misc device (ioctl) driver 3.04.20
- [ 1.655026] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.688626] mptctl: Registered with Fusion MPT base driver
- [ 1.699653] mptctl: /dev/mptctl @ (major,minor=10,220)
- [ 1.710597] Fusion MPT LAN driver 3.04.20
- [ 1.711070] ata1: SATA link down (SStatus 0 SControl 300)
- [ 1.732340] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.743256] ehci_hcd 0000:00:10.4: EHCI Host Controller
- [ 1.754544] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
- [ 1.765459] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfae00000
- [ 1.782026] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
- [ 1.792462] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.802763] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.812985] usb usb1: Product: EHCI Host Controller
- [ 1.823055] usb usb1: Manufacturer: Linux 3.5.2 ehci_hcd
- [ 1.833038] usb usb1: SerialNumber: 0000:00:10.4
- [ 1.843700] hub 1-0:1.0: USB hub found
- [ 1.853681] hub 1-0:1.0: 8 ports detected
- [ 1.864556] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.874813] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.885269] uhci_hcd 0000:00:10.0: UHCI Host Controller
- [ 1.896025] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
- [ 1.906591] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
- [ 1.917155] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.927981] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.938743] usb usb2: Product: UHCI Host Controller
- [ 1.939704]
- [ 1.939705] =================================
- [ 1.939705] [ INFO: inconsistent lock state ]
- [ 1.939708] 3.5.2 #8 Not tainted
- [ 1.939708] ---------------------------------
- [ 1.939709] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
- [ 1.939711] swapper/1/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
- [ 1.939712] (&(&host->lock)->rlock){?.+...}, at: [<ffffffff818f4fc7>] ata_bmdma_interrupt+0x27/0x1d0
- [ 1.939721] {HARDIRQ-ON-W} state was registered at:
- [ 1.939722] [<ffffffff81099a7b>] __lock_acquire+0x61b/0x1af0
- [ 1.939727] [<ffffffff8109b49a>] lock_acquire+0x8a/0x110
- [ 1.939729] [<ffffffff81b4d1d1>] _raw_spin_lock+0x31/0x40
- [ 1.939734] [<ffffffff8190b545>] pdc_sata_hardreset+0x85/0x100
- [ 1.939736] [<ffffffff818ead3a>] ata_do_reset+0x3a/0x90
- [ 1.939739] [<ffffffff818edef2>] ata_eh_reset+0x372/0xe00
- [ 1.939741] [<ffffffff818eeda5>] ata_eh_recover+0x2a5/0x13d0
- [ 1.939744] [<ffffffff818f08bd>] ata_do_eh+0x4d/0xb0
- [ 1.939746] [<ffffffff818f353a>] ata_sff_error_handler+0xca/0x120
- [ 1.939749] [<ffffffff8190ab64>] pdc_error_handler+0x24/0x30
- [ 1.939751] [<ffffffff818f041c>] ata_scsi_port_error_handler+0x47c/0x800
- [ 1.939754] [<ffffffff818f083e>] ata_scsi_error+0x9e/0xd0
- [ 1.939756] [<ffffffff81673468>] scsi_error_handler+0xf8/0x500
- [ 1.939759] [<ffffffff8106567e>] kthread+0xae/0xc0
- [ 1.939762] [<ffffffff81b4f774>] kernel_thread_helper+0x4/0x10
- [ 1.939766] irq event stamp: 48170
- [ 1.939767] hardirqs last enabled at (48167): [<ffffffff8100ab7d>] default_idle+0x5d/0x1b0
- [ 1.939770] hardirqs last disabled at (48168): [<ffffffff81b4dbe7>] common_interrupt+0x67/0x6c
- [ 1.939772] softirqs last enabled at (48170): [<ffffffff81049a53>] _local_bh_enable+0x13/0x20
- [ 1.939776] softirqs last disabled at (48169): [<ffffffff8104a4d5>] irq_enter+0x75/0x90
- [ 1.939779]
- [ 1.939779] other info that might help us debug this:
- [ 1.939780] Possible unsafe locking scenario:
- [ 1.939780]
- [ 1.939780] CPU0
- [ 1.939780] ----
- [ 1.939781] lock(&(&host->lock)->rlock);
- [ 1.939782] <Interrupt>
- [ 1.939782] lock(&(&host->lock)->rlock);
- [ 1.939784]
- [ 1.939784] *** DEADLOCK ***
- [ 1.939784]
- [ 1.939785] no locks held by swapper/1/0.
- [ 1.939785]
- [ 1.939785] stack backtrace:
- [ 1.939787] Pid: 0, comm: swapper/1 Not tainted 3.5.2 #8
- [ 1.939787] Call Trace:
- [ 1.939788] <IRQ> [<ffffffff81b35ae1>] print_usage_bug+0x1f7/0x208
- [ 1.939793] [<ffffffff8101001f>] ? save_stack_trace+0x2f/0x50
- [ 1.939796] [<ffffffff8109745a>] ? add_lock_to_list.isra.25.constprop.39+0x7a/0xd0
- [ 1.939799] [<ffffffff810988b0>] ? print_shortest_lock_dependencies+0x1d0/0x1d0
- [ 1.939801] [<ffffffff81099422>] mark_lock+0x262/0x2a0
- [ 1.939803] [<ffffffff81099c73>] __lock_acquire+0x813/0x1af0
- [ 1.939806] [<ffffffff8109bd49>] ? mark_held_locks+0xa9/0x100
- [ 1.939808] [<ffffffff81077113>] ? try_to_wake_up+0x1c3/0x2d0
- [ 1.939811] [<ffffffff8109b49a>] lock_acquire+0x8a/0x110
- [ 1.939813] [<ffffffff818f4fc7>] ? ata_bmdma_interrupt+0x27/0x1d0
- [ 1.939815] [<ffffffff81b4d2d1>] _raw_spin_lock_irqsave+0x41/0x60
- [ 1.939818] [<ffffffff818f4fc7>] ? ata_bmdma_interrupt+0x27/0x1d0
- [ 1.939820] [<ffffffff818f4fc7>] ata_bmdma_interrupt+0x27/0x1d0
- [ 1.939823] [<ffffffff810c2edd>] handle_irq_event_percpu+0x5d/0x1f0
- [ 1.939826] [<ffffffff810c30b8>] handle_irq_event+0x48/0x70
- [ 1.939828] [<ffffffff81b4d1d9>] ? _raw_spin_lock+0x39/0x40
- [ 1.939830] [<ffffffff810c608e>] ? handle_fasteoi_irq+0x1e/0xf0
- [ 1.939832] [<ffffffff810c60ca>] handle_fasteoi_irq+0x5a/0xf0
- [ 1.939835] [<ffffffff81003ce2>] handle_irq+0x22/0x40
- [ 1.939838] [<ffffffff81b4ff2a>] do_IRQ+0x5a/0xe0
- [ 1.939841] [<ffffffff81b4dbec>] common_interrupt+0x6c/0x6c
- [ 1.939843] <EOI> [<ffffffff8100ab7f>] ? default_idle+0x5f/0x1b0
- [ 1.939846] [<ffffffff8100ab7d>] ? default_idle+0x5d/0x1b0
- [ 1.939848] [<ffffffff8100b816>] cpu_idle+0x106/0x120
- [ 1.939851] [<ffffffff81b2c95b>] start_secondary+0x1dd/0x1e4
- [ 1.939878] ata4.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
- [ 1.939880] ata4.00: 390721968 sectors, multi 16: LBA48
- [ 2.667162] usb usb2: Manufacturer: Linux 3.5.2 uhci_hcd
- [ 2.668037] ata2: SATA link down (SStatus 0 SControl 0)
- [ 2.686423] ata4.00: configured for UDMA/133
- [ 2.705450] usb usb2: SerialNumber: 0000:00:10.0
- [ 2.715653] hub 2-0:1.0: USB hub found
- [ 2.725581] hub 2-0:1.0: 2 ports detected
- [ 2.735564] uhci_hcd 0000:00:10.1: UHCI Host Controller
- [ 2.745717] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
- [ 2.756098] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
- [ 2.766555] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.777260] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.788112] usb usb3: Product: UHCI Host Controller
- [ 2.799058] usb usb3: Manufacturer: Linux 3.5.2 uhci_hcd
- [ 2.810022] usb usb3: SerialNumber: 0000:00:10.1
- [ 2.818224] scsi 3:0:0:0: Direct-Access ATA ST3200822AS 3.01 PQ: 0 ANSI: 5
- [ 2.818594] sd 3:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
- [ 2.818664] sd 3:0:0:0: [sda] Write Protect is off
- [ 2.818667] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.818696] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.867743] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
- [ 2.868651] sd 3:0:0:0: [sda] Attached SCSI disk
- [ 2.899151] hub 3-0:1.0: USB hub found
- [ 2.910416] hub 3-0:1.0: 2 ports detected
- [ 2.921710] uhci_hcd 0000:00:10.2: UHCI Host Controller
- [ 2.933160] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
- [ 2.944686] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000
- [ 2.956190] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.967902] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.979682] usb usb4: Product: UHCI Host Controller
- [ 2.991506] usb usb4: Manufacturer: Linux 3.5.2 uhci_hcd
- [ 3.003436] usb usb4: SerialNumber: 0000:00:10.2
- [ 3.015571] hub 4-0:1.0: USB hub found
- [ 3.027464] hub 4-0:1.0: 2 ports detected
- [ 3.028017] ata5: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
- [ 3.051548] uhci_hcd 0000:00:10.3: UHCI Host Controller
- [ 3.063901] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
- [ 3.076276] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e400
- [ 3.088525] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.101027] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.113613] usb usb5: Product: UHCI Host Controller
- [ 3.126089] usb usb5: Manufacturer: Linux 3.5.2 uhci_hcd
- [ 3.138583] usb usb5: SerialNumber: 0000:00:10.3
- [ 3.150969] hub 5-0:1.0: USB hub found
- [ 3.162764] hub 5-0:1.0: 2 ports detected
- [ 3.175288] Initializing USB Mass Storage driver...
- [ 3.189384] usbcore: registered new interface driver usb-storage
- [ 3.201237] USB Mass Storage support registered.
- [ 3.213151] usbcore: registered new interface driver ums-alauda
- [ 3.225325] usbcore: registered new interface driver ums-cypress
- [ 3.237328] usbcore: registered new interface driver ums-datafab
- [ 3.249133] usbcore: registered new interface driver ums-freecom
- [ 3.260749] usbcore: registered new interface driver ums-isd200
- [ 3.272089] usbcore: registered new interface driver ums-jumpshot
- [ 3.283238] usbcore: registered new interface driver ums-karma
- [ 3.294082] usbcore: registered new interface driver ums-onetouch
- [ 3.304804] usbcore: registered new interface driver ums-sddr09
- [ 3.315381] usbcore: registered new interface driver ums-sddr55
- [ 3.325634] usbcore: registered new interface driver ums-usbat
- [ 3.335653] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- [ 3.345654] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- [ 3.356428] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 3.367135] mousedev: PS/2 mouse device common for all mice
- [ 3.377432] rtc_cmos 00:02: RTC can wake from S4
- [ 3.387918] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
- [ 3.398266] rtc0: alarms up to one year, y3k, 114 bytes nvram
- [ 3.408769] md: linear personality registered for level -1
- [ 3.419182] md: raid0 personality registered for level 0
- [ 3.429599] md: raid1 personality registered for level 1
- [ 3.439790] md: raid10 personality registered for level 10
- [ 3.449848] md: raid6 personality registered for level 6
- [ 3.459893] md: raid5 personality registered for level 5
- [ 3.469611] md: raid4 personality registered for level 4
- [ 3.479145] md: multipath personality registered for level -4
- [ 3.489059] device-mapper: uevent: version 1.0.3
- [ 3.498889] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 3.509258] cpuidle: using governor ladder
- [ 3.519344] cpuidle: using governor menu
- [ 3.529066] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- [ 3.539416] input: Speakup as /devices/virtual/input/input1
- [ 3.549784] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
- [ 3.560053] speakup 3.1.6: initialized
- [ 3.570171] synth name on entry is: (null)
- [ 3.580249] TCP: cubic registered
- [ 3.590126] Initializing XFRM netlink socket
- [ 3.600074] NET: Registered protocol family 17
- [ 3.610074] Key type dns_resolver registered
- [ 3.620550] registered taskstats version 1
- [ 3.631103] rtc_cmos 00:02: setting system clock to 2012-09-11 11:59:11 UTC (1347364751)
- [ 3.641665] md: Waiting for all devices to be available before autodetect
- [ 3.652095] md: If you don't use raid, use raid=noautodetect
- [ 3.662796] md: Autodetecting RAID arrays.
- [ 3.673230] md: Scanned 0 and added 0 devices.
- [ 3.683809] md: autorun ...
- [ 3.694382] md: ... autorun DONE.
- [ 3.718275] EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
- [ 3.737472] EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
- [ 3.776532] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.788190] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
- [ 3.837963] devtmpfs: mounted
- [ 3.851576] Freeing unused kernel memory: 872k freed
- [ 3.864249] Write protecting the kernel read-only data: 16384k
- [ 3.879298] Freeing unused kernel memory: 684k freed
- [ 3.892184] Freeing unused kernel memory: 112k freed
- [ 4.992023] loop: module loaded
- [ 5.235403] udevd[1366]: starting version 182
- [ 6.446992] microcode: AMD CPU family 0xf not supported
- [ 6.712179] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
- [ 6.724593] ACPI: Power Button [PWRB]
- [ 6.737165] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
- [ 6.749950] ACPI: Sleep Button [SLPB]
- [ 6.762518] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
- [ 6.775373] ACPI: Power Button [PWRF]
- [ 6.970234] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 7.422978] Linux agpgart interface v0.103
- [ 7.463396] skge 0000:00:0a.0: PCI: Disallowing DAC for device
- [ 7.476813] skge: 1.14 addr 0xfac00000 irq 17 chip Yukon-Lite rev 9
- [ 7.490427] skge 0000:00:0a.0: eth0: addr 00:15:f2:09:ed:bf
- [ 7.728087] firewire_ohci 0000:00:07.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
- [ 7.742207] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0282]
- [ 7.758556] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xec000000
- [ 7.795885] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 cpu cores) (version 2.20.00)
- [ 7.809972] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
- [ 7.809972] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
- [ 7.955643] snd_via82xx 0000:00:11.5: setting latency timer to 64
- [ 8.243199] firewire_core 0000:00:07.0: created device fw0: GUID 0011d800006ee33c, S400
- [ 8.389179] [drm] Initialized drm 1.1.0 20060810
- [ 8.630744] wmi: Mapper loaded
- [ 10.036657] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x018100c1)
- [ 10.052199] checking generic (f0000000 4000000) vs hw (f0000000 8000000)
- [ 10.067174] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
- [ 10.082273] Console: switching to colour dummy device 80x25
- [ 10.082504] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
- [ 10.131256] [drm] nouveau 0000:01:00.0: ... appears to be valid
- [ 10.131263] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
- [ 10.131455] [drm] nouveau 0000:01:00.0: BMP BIOS found
- [ 10.131465] [drm] nouveau 0000:01:00.0: BMP version 5.40
- [ 10.131472] [drm] nouveau 0000:01:00.0: Bios version 04.18.20.42
- [ 10.131621] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
- [ 10.131629] [drm] nouveau 0000:01:00.0: DCB version 2.2
- [ 10.131636] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 000088b8
- [ 10.131643] [drm] nouveau 0000:01:00.0: DCB outp 01: 02010321 00000733
- [ 10.131790] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
- [ 10.131799] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xED14
- [ 10.133844] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF20C
- [ 10.133873] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEE96
- [ 10.148934] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF57F
- [ 10.148945] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF59C
- [ 10.148956] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF081
- [ 10.160023] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF1A7
- [ 10.160291] [TTM] Zone kernel: Available graphics memory: 1016192 kiB
- [ 10.160298] [TTM] Initializing pool allocator
- [ 10.160310] [TTM] Initializing DMA pool allocator
- [ 10.160335] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM (DDR1)
- [ 10.160711] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
- [ 10.160745] agpgart: udevd tried to set rate=x12. Setting to AGP3 x8 mode.
- [ 10.160757] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
- [ 10.160858] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
- [ 10.160866] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
- [ 10.162609] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 10.162616] [drm] No driver support for vblank timestamp query.
- [ 10.168317] [drm] nouveau 0000:01:00.0: 0 available performance level(s)
- [ 10.168326] [drm] nouveau 0000:01:00.0: c: core 274MHz memory 300MHz
- [ 10.170158] [drm] nouveau 0000:01:00.0: MM: using M2MF for buffer copies
- [ 10.201207] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
- [ 10.201217] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 1)
- [ 10.265197] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88007a91f000
- [ 10.265420] fbcon: nouveaufb (fb0) is primary device
- [ 10.926169] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
- [ 10.926172] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
- [ 10.926205] Console: switching to colour frame buffer device 160x64
- [ 10.928062] fb0: nouveaufb frame buffer device
- [ 10.928063] drm: registered panic notifier
- [ 10.928070] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
- [ 11.001601] Adding 4008212k swap on /dev/sda3. Priority:-1 extents:1 across:4008212k
- [ 11.166030] fuse init (API version 7.19)
- [ 11.864065] EXT4-fs (sda2): re-mounted. Opts: (null)
- [ 12.512934] ppdev: user-space parallel port driver
- [ 12.517732] lp: driver loaded but no devices found
- [ 15.900288] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 15.901824] REISERFS (device sda5): found reiserfs format "3.6" with standard journal
- [ 15.901853] REISERFS (device sda5): using ordered data mode
- [ 15.901863] reiserfs: using flush barriers
- [ 15.902279] REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
- [ 15.904315] REISERFS (device sda5): checking transaction log (sda5)
- [ 15.963883] REISERFS (device sda5): Using r5 hash to sort names
- [ 16.005748] REISERFS (device sda6): found reiserfs format "3.6" with standard journal
- [ 16.006255] REISERFS (device sda6): using ordered data mode
- [ 16.006916] reiserfs: using flush barriers
- [ 16.015647] REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
- [ 16.018449] REISERFS (device sda6): checking transaction log (sda6)
- [ 16.105627] REISERFS (device sda6): Using r5 hash to sort names
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement