Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.0.18-franco.Kernel-nightly-15.2 ([email protected]) (gcc version 4.4.3 (GCC) ) #47 SMP PREEMPT Wed Feb 1 19:33:30 WET 2012
- [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: Tuna
- [ 0.000000] Reserving 16777216 bytes SDRAM for VRAM
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] OMAP4460 ES1.1
- [ 0.000000] SRAM: Mapped pa 0x4030d000 to va 0xfe40d000 size: 0x1000
- [ 0.000000] PERCPU: Embedded 7 pages/cpu @c10ec000 s6656 r8192 d13824 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 180224
- [ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 mem=1G vmalloc=768M omap_wdt.timer_margin=30 no_console_suspend androidboot.serialno=01498FE81401E00B androidboot.bootloader=PRIMEKL01 androidboot.baseband=SC04DOMKKD lcd_bootfb=0xbea70000 mms_ts.panel_id=18 androidboot.macaddr=
- [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Memory: 512MB 200MB = 712MB total
- [ 0.000000] Memory: 711216k/711216k available, 337360k reserved, 598016K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
- [ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .init : 0xc0008000 - 0xc004d000 ( 276 kB)
- [ 0.000000] .text : 0xc004d000 - 0xc06f9000 (6832 kB)
- [ 0.000000] .data : 0xc06fa000 - 0xc0759520 ( 382 kB)
- [ 0.000000] .bss : 0xc0759544 - 0xc08e4e18 (1583 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-0, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] NR_IRQS:410
- [ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
- [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000030] Calibrating delay loop... 1194.24 BogoMIPS (lpj=4665344)
- [ 0.070434] pid_max: default: 32768 minimum: 301
- [ 0.070434] Mount-cache hash table entries: 512
- [ 0.071685] Initializing cgroup subsys cpuacct
- [ 0.071685] Initializing cgroup subsys devices
- [ 0.071777] Initializing cgroup subsys freezer
- [ 0.071777] Initializing cgroup subsys blkio
- [ 0.071777] CPU: Testing write buffer coherency: ok
- [ 0.072204] L310 cache controller enabled
- [ 0.072204] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache size: 1048576 B
- [ 0.165924] Brought up 2 CPUs
- [ 0.165924] SMP: Total of 2 processors activated (2388.48 BogoMIPS).
- [ 0.166168] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
- [ 0.170074] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
- [ 0.170074] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
- [ 0.170104] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
- [ 0.170104] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
- [ 0.170104] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
- [ 0.170166] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
- [ 0.170166] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
- [ 0.170166] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
- [ 0.170257] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
- [ 0.170257] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for thermal_sensor
- [ 0.170257] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
- [ 0.170562] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
- [ 0.170562] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck.
- [ 0.175445] omap_hwmod: mcpdm: cannot be enabled (3)
- [ 0.180694] print_constraints: dummy:
- [ 0.181152] NET: Registered protocol family 16
- [ 0.181549] GPMC revision 6.0
- [ 0.181640] EMIF0 is enabled with IRQ142
- [ 0.182800] EMIF1 is enabled with IRQ143
- [ 0.182800] Last reset was warm software reset (PRM_RSTST=0x2)
- [ 0.182800]
- [ 0.182861] HSI: device registered as omap_hwmod: hsi
- [ 0.183166] OMAP GPIO hardware version 0.1
- [ 0.184722] omap_mux_init: Add partition: #1: core, flags: 2
- [ 0.184722] omap_mux_init: Add partition: #2: wkup, flags: 2
- [ 0.186035] Tuna HW revision: 09 (Maguro 8th Sample), cpu OMAP4460 ES1.1
- [ 0.188446] ram_console: got buffer at a0000000, size 200000
- [ 0.188598] ram_console: found existing buffer, size 41822, start 41822
- [ 0.304534] console [ram-1] enabled
- [ 0.304534] Using 0xc072e25c
- [ 0.308044] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio102
- [ 0.308258] omap_mux_init_gpio: Could not set gpio102
- [ 0.308807] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio101
- [ 0.308807] omap_mux_init_gpio: Could not set gpio101
- [ 0.508728] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio100
- [ 0.508728] omap_mux_init_gpio: Could not set gpio100
- [ 0.514251] OMAP DMA hardware revision 0.0
- [ 0.514251] omap_rproc_get_pool: carveout memory is unavailable: 0x0, 0x0
- [ 0.522521] bio: create slab <bio-0> at 0
- [ 0.523132] print_constraints: vwl1271: 2000 mV
- [ 0.524383] SCSI subsystem initialized
- [ 0.525329] usbcore: registered new interface driver usbfs
- [ 0.525695] usbcore: registered new interface driver hub
- [ 0.526123] usbcore: registered new device driver usb
- [ 0.527465] i2c-gpio i2c-gpio.5: using pins 98 (SDA) and 99 (SCL)
- [ 0.540924] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
- [ 0.541717] Skipping twl internal clock init and using bootloader value (unknown osc rate)
- [ 0.544830] twl6030: PIH (irq 39) chaining IRQs 368..387
- [ 0.546936] print_constraints: VUSB: 3300 mV normal standby
- [ 0.547637] print_constraints: VMMC: 1800 mV normal standby
- [ 0.548461] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
- [ 0.548736] print_constraints: VUSIM: 2200 mV normal standby
- [ 0.548736] print_constraints: VCXIO: 1800 mV normal standby
- [ 0.549926] print_constraints: VDAC: 1800 mV normal standby
- [ 0.550842] print_constraints: VAUX1_6030: 3000 mV normal standby
- [ 0.551757] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
- [ 0.552276] print_constraints: VAUX3_6030: 3100 mV normal standby
- [ 0.553314] print_constraints: CLK32KG:
- [ 0.554199] print_constraints: CLK32KAUDIO:
- [ 0.555114] print_constraints: VDD3:
- [ 0.555847] print_constraints: VMEM: at 1250 mV
- [ 0.556732] print_constraints: V2V1: 2100 mV normal standby
- [ 0.557739] print_constraints: VANA: 2100 mV normal standby
- [ 0.572143] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
- [ 0.587768] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
- [ 0.603393] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
- [ 0.604461] omap-rproc omap-rproc.0: dsp is available
- [ 0.605102] omap-rproc omap-rproc.1: ipu is available
- [ 0.605102] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 0.605102] Bluetooth: Core ver 2.16
- [ 0.606384] NET: Registered protocol family 31
- [ 0.606506] Bluetooth: HCI device and connection manager initialized
- [ 0.606506] Bluetooth: HCI socket layer initialized
- [ 0.606506] Bluetooth: L2CAP socket layer initialized
- [ 0.606933] Bluetooth: SCO socket layer initialized
- [ 0.607543] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.608001] JRCU: callback processing now allowed.
- [ 0.608032] JRCU: callback processing via daemon started.
- [ 0.608306] Switching to clocksource 32k_counter
- [ 0.609954] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
- [ 0.610290] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
- [ 0.610351] musb-hdrc: MHDRC RTL version 2.0
- [ 0.610626] musb-hdrc: setup fifo_mode 4
- [ 0.610809] musb-hdrc: 28/31 max ep, 16384/16384 memory
- [ 0.611236] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
- [ 0.611785] NET: Registered protocol family 2
- [ 0.611785] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.613403] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.613403] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
- [ 0.613403] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.613403] TCP reno registered
- [ 0.614715] UDP hash table entries: 128 (order: 0, 4096 bytes)
- [ 0.614715] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
- [ 0.614929] NET: Registered protocol family 1
- [ 0.614929] Trying to unpack rootfs image as initramfs...
- [ 0.647613] Freeing initrd memory: 380K
- [ 2.091674] console [ttyFIQ0] enabled
- [ 2.091674] Registered FIQ tty driver c79bce40
- [ 2.093841] omap-iommu omap-iommu.0: ducati registered
- [ 2.094116] omap-iommu omap-iommu.1: tesla registered
- [ 2.101776] highmem bounce pool size: 64 pages
- [ 2.102050] ashmem: initialized
- [ 2.110260] NTFS driver 2.1.30 [Flags: R/W].
- [ 2.110748] fuse init (API version 7.16)
- [ 2.111175] msgmni has been set to 221
- [ 2.113159] io scheduler noop registered
- [ 2.113372] io scheduler cfq registered (default)
- [ 2.114410] OMAP DSS rev 4.0
- [ 2.117797] dsscomp: initializing.
- [ 2.117919] misc dsscomp: display0=s6e8aa0
- [ 2.118041] misc dsscomp: display1=hdmi_panel
- [ 2.118225] misc dsscomp: found 2 displays and 4 overlays
- [ 2.118682] could not allocate slot
- [ 2.119689] omap-rproc omap-rproc.1: powering up ipu
- [ 2.120147] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfully
- [ 2.120910] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfully
- [ 2.121734] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
- [ 2.194641] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
- [ 2.367858] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
- [ 2.591552] omap_ion_probe: adding heap secure_input of type 2 with ba300000@5a00000
- [ 2.591766] omap_ion_probe: adding heap tiler of type 4 with ae900000@5100000
- [ 2.591766] omap_ion_probe: adding heap nonsecure_tiler of type 4 with ada00000@f00000
- [ 2.591766] PVR: PVRCore_Init
- [ 2.592559] PVR: PVRSRVDriverProbe(pDevice=c78baa00)
- [ 2.592987] PVR: SGX register base: 0x56000000
- [ 2.592987] PVR: SGX register size: 65535
- [ 2.592987] PVR: SGX IRQ: 53
- [ 2.593292] PVR: EnableSystemClocks: Enabling System Clocks
- [ 2.593841] PVR: PVRCore_Init: major device 250
- [ 2.600799] brd: module loaded
- [ 2.600799] loop: module loaded
- [ 2.607208] input: barometer as /devices/virtual/input/input0
- [ 2.607208] sec_jack_probe : Registering jack driver
- [ 2.608489] i2c i2c-4: mpu_probe: 0
- [ 2.626037] i2c i2c-4: Installing irq using 205
- [ 2.626159] i2c i2c-4: Module Param interface = mpuirq
- [ 2.626586] i2c-core: driver [mpu3050] using legacy suspend method
- [ 2.626586] i2c-core: driver [mpu3050] using legacy resume method
- [ 2.626586] mpu_init: Probe name mpu3050
- [ 2.626586] i2c i2c-4: bma250_mod_probe: bma250
- [ 2.626586] i2c i2c-4: Installing Accel irq using 282
- [ 2.640014] i2c i2c-4: mpu3050: +bma250
- [ 2.640014] bma250_mod_init: Probe name bma250_mod
- [ 2.640014] i2c i2c-4: yas530_mod_probe: yas530
- [ 2.640533] i2c i2c-4: Installing Compass irq using 336
- [ 2.660003] i2c i2c-4: mpu3050: +yas530
- [ 2.660003] yas530_mod_init: Probe name yas530_mod
- [ 2.666717] omap_temp_sensor omap_temp_sensor.0: omap_temp_sensor probed
- [ 2.667877] colorcontrol_init misc_register(colorcontrol)
- [ 2.668060] customvoltage_initialization misc_register(customvoltage)
- [ 2.672241] m25p80 spi3.0: w25q80 (1024 Kbytes)
- [ 2.673004] PPP generic driver version 2.4.2
- [ 2.673004] PPP Deflate Compression module registered
- [ 2.674011] PPP BSD Compression module registered
- [ 2.674896] PPP MPPE Compression module registered
- [ 2.674987] NET: Registered protocol family 24
- [ 2.677246] tun: Universal TUN/TAP device driver, 1.6
- [ 2.677246] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
- [ 2.677673] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.677673] usbcore: registered new interface driver cdc_acm
- [ 2.678253] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 2.678253] Initializing USB Mass Storage driver...
- [ 2.678253] usbcore: registered new interface driver usb-storage
- [ 2.678253] USB Mass Storage support registered.
- [ 2.678253] usbcore: registered new interface driver usbserial
- [ 2.678253] usbserial: USB Serial Driver core
- [ 2.880889] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 2.881103] android_usb gadget: Number of LUNs=1
- [ 2.881103] lun0: LUN: removable file: (no medium)
- [ 2.881103] android_usb gadget: android_usb ready
- [ 2.881805] musb-hdrc musb-hdrc: MUSB HDRC host driver
- [ 2.881805] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
- [ 2.882324] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.882385] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.882659] usb usb1: Product: MUSB HDRC host driver
- [ 2.882659] usb usb1: Manufacturer: Linux 3.0.18-franco.Kernel-nightly-15.2 musb-hcd
- [ 2.883026] usb usb1: SerialNumber: musb-hdrc
- [ 2.883026] hub 1-0:1.0: USB hub found
- [ 2.883026] hub 1-0:1.0: 1 port detected
- [ 2.883026] usbcore: registered new interface driver xpad
- [ 2.884826] usbcore: registered new interface driver usb_acecad
- [ 2.884826] acecad: v3.2:USB Acecad Flair tablet driver
- [ 2.884826] usbcore: registered new interface driver aiptek
- [ 2.884826] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
- [ 2.885467] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
- [ 2.885467] usbcore: registered new interface driver gtco
- [ 2.885803] GTCO usb driver version: 2.00.0006
- [ 2.885803] usbcore: registered new interface driver hanwang
- [ 2.885803] usbcore: registered new interface driver kbtab
- [ 2.885803] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
- [ 2.885803] usbcore: registered new interface driver wacom
- [ 2.886657] wacom: v1.52:USB Wacom tablet driver
- [ 2.886840] input: Melfas MMSxxx Touchscreen as /devices/platform/omap/omap_i2c.3/i2c-3/3-0048/input/input1
- [ 3.311981] GPIO Input Driver: Start gpio inputs for tuna-gpio-keypad in interrupt mode
- [ 3.312316] GPIO Input Driver: Start gpio inputs for tuna-gpio-keypad in interrupt mode
- [ 3.312774] input: tuna-gpio-keypad as /devices/virtual/input/input2
- [ 3.313720] input: proximity as /devices/virtual/input/input3
- [ 3.314239] input: lightsensor-level as /devices/virtual/input/input4
- [ 3.317718] using rtc device, twl_rtc, for alarms
- [ 3.318328] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- [ 3.318786] i2c /dev entries driver
- [ 3.319488] dmm: probe base: fd300000, irq 145
- [ 3.323059] max17040 4-0036: MAX17040 Fuel-Gauge Ver 3
- [ 3.325592] OMAP Watchdog Timer Rev 0x01: initial timeout 30 sec
- [ 3.328308] device-mapper: uevent: version 1.0.3
- [ 3.328735] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
- [ 3.328979] Bluetooth: HCI UART driver ver 2.2
- [ 3.329071] Bluetooth: HCI H4 protocol initialized
- [ 3.329406] cpuidle: using governor ladder
- [ 3.329528] cpuidle: using governor menu
- [ 3.337799] usbcore: registered new interface driver usbhid
- [ 3.338012] usbhid: USB HID core driver
- [ 3.338562] logger: created 256K log 'log_main'
- [ 3.338836] logger: created 256K log 'log_events'
- [ 3.339050] logger: created 256K log 'log_radio'
- [ 3.339263] logger: created 256K log 'log_system'
- [ 3.341278] OMAP HSI: HSI driver version 0.4.2
- [ 3.341552] omap_hsi omap_hsi.0: Registering IRQ mpu_p1 (99)
- [ 3.341766] omap_hsi omap_hsi.0: HSI port 1 initialized
- [ 3.341857] omap_hsi omap_hsi.0: Registering IRQ mpu_dma (103)
- [ 3.342224] omap_hsi omap_hsi.0: HSI Hardware REVISION 0x50043101
- [ 3.343566] max17040 4-0036: online = 1 vcell = 3688750 soc = 41 status = 2 health = 1 temp = 300 charger status = 0
- [ 3.344665] omap_hsi omap_hsi.0: Cannot set HSI FClk to default value: 96000000. Will retry on next open
- [ 3.348175] SDP4430 SoC init
- [ 3.379028] asoc: null-codec-dai <-> MultiMedia1 mapping ok
- [ 3.380462] asoc: null-codec-dai <-> MultiMedia2 mapping ok
- [ 3.382324] asoc: null-codec-dai <-> Voice mapping ok
- [ 3.383819] asoc: null-codec-dai <-> Tones mapping ok
- [ 3.385162] asoc: null-codec-dai <-> Vibra mapping ok
- [ 3.386199] asoc: null-codec-dai <-> MODEM mapping ok
- [ 3.387207] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
- [ 3.389373] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
- [ 3.390777] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok
- [ 3.392211] asoc: dit-hifi <-> omap-mcasp-dai mapping ok
- [ 3.394470] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Stereo In debugfs file
- [ 3.395599] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
- [ 3.396545] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
- [ 3.397644] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
- [ 3.398620] asoc: twl6040-vib <-> mcpdm-vib mapping ok
- [ 3.399688] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
- [ 3.400665] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
- [ 3.401733] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
- [ 3.402740] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
- [ 3.404632] input: Tuna Headset Jack as /devices/platform/soc-audio/sound/card0/input5
- [ 3.407775] asoc: hdmi-audio-codec <-> hdmi-audio-dai mapping ok
- [ 3.408477] ALSA device list:
- [ 3.408569] #0: TI OMAP4 Board
- [ 3.408691] #1: OMAP4HDMI
- [ 3.408996] GACT probability NOT on
- [ 3.409118] Mirror/redirect action on
- [ 3.409210] u32 classifier
- [ 3.409301] Actions configured
- [ 3.409484] Netfilter messages via NETLINK v0.30.
- [ 3.409667] nf_conntrack version 0.5.0 (11118 buckets, 44472 max)
- [ 3.411102] ctnetlink v0.93: registering with nfnetlink.
- [ 3.411254] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 3.411437] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 3.411865] xt_time: kernel timezone is -0000
- [ 3.414855] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.415222] arp_tables: (C) 2002 David S. Miller
- [ 3.415496] TCP veno registered
- [ 3.416351] NET: Registered protocol family 10
- [ 3.423797] Mobile IPv6
- [ 3.423950] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.424560] IPv6 over IPv4 tunneling driver
- [ 3.431976] NET: Registered protocol family 17
- [ 3.432189] NET: Registered protocol family 15
- [ 3.432586] Bridge firewalling registered
- [ 3.432800] Bluetooth: RFCOMM TTY layer initialized
- [ 3.433013] Bluetooth: RFCOMM socket layer initialized
- [ 3.433105] Bluetooth: RFCOMM ver 1.11
- [ 3.433288] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 3.433410] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 3.433746] NET: Registered protocol family 35
- [ 3.434020] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- [ 3.434326] ThumbEE CPU extension supported.
- [ 3.434448] Registering SWP/SWPB emulation handler
- [ 3.436920] mmc0: new high speed MMC card at address 0001
- [ 3.437530] mmcblk0: mmc0:0001 VYL00M 14.6 GiB
- [ 3.437805] mmcblk0boot0: mmc0:0001 VYL00M partition 1 512 KiB
- [ 3.438171] mmcblk0boot1: mmc0:0001 VYL00M partition 2 512 KiB
- [ 3.441467] Reprogramming LPDDR2 timings to 400000000 Hz
- [ 3.442687] Power Management for TI OMAP4.
- [ 3.442932] OMAP4 PM: Static dependency added between MPUSS and DUCATI <-> L4_PER/CFG and L3_1.
- [ 3.444061] sr_init: No PMIC hook to init smartreflex
- [ 3.444335] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
- [ 3.444763] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
- [ 3.445098] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
- [ 3.445343] sr_class1p5_driver_init: OMAP4460: add 10mV margin for class 1.5
- [ 3.445465] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13
- [ 3.445800] SmartReflex class 1.5 driver: initialized (86400000ms)
- [ 3.447692] [MODEM_IF] PA EVENT : reset =0, pa=1
- [ 3.448211] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:0 (mask:ff)
- [ 3.448486] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:1 (mask:ff)
- [ 3.448516] mmcblk0boot1: unknown partition table
- [ 3.448944] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:2 (mask:ff)
- [ 3.449127] [MODEM_IF] PA EVENT : reset =0, pa=0
- [ 3.449340] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:3 (mask:ff)
- [ 3.449645] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:4 (mask:ff)
- [ 3.449859] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:5 (mask:ff)
- [ 3.450164] mmcblk0boot0: unknown partition table
- [ 3.450195] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:6 (mask:ff)
- [ 3.450317] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:7 (mask:ff)
- [ 3.469848] clock: disabling unused clocks to save power
- [ 3.639953] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1050000 Calib=1010000
- [ 3.640228] sr_class1p5_calib_work: iva: Calibration complete: Voltage Nominal=1140000 Calib=1012840
- [ 3.640411] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1127000 Calib=1101460
- [ 3.640747] cannot apply mgr(lcd) on inactive device
- [ 3.640960] omapfb omapfb: failed to apply dispc config
- [ 3.641082] cannot apply mgr(tv) on inactive device
- [ 3.641235] omapfb omapfb: failed to apply dispc config
- [ 3.641387] cannot apply mgr(lcd2) on inactive device
- [ 3.641510] omapfb omapfb: failed to apply dispc config
- [ 3.644378] regulator_init_complete: VAUX2_6030: disabling
- [ 3.645202] regulator_init_complete: VDAC: disabling
- [ 3.646209] regulator_init_complete: VPP: disabling
- [ 3.647033] regulator_init_complete: VUSB: disabling
- [ 3.647735] omaplfb OMAPLFBInitFBDev: Device 0: Requesting 4 TILER 2D framebuffers
- [ 3.648498] ## wifi_probe
- [ 3.648651] wifi_set_power = 1
- [ 3.648773] create_regulator: CLK32KAUDIO: Failed to create debugfs directory
- [ 4.171081] wifi_set_carddetect = 1
- [ 4.171539]
- [ 4.171569] Dongle Host Driver, version 5.90.125.94.1
- [ 4.171569] Compiled in drivers/net/wireless/bcmdhd on Feb 1 2012 at 19:21:35
- [ 4.287353] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 4.332855] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 4.344482] mmc1: new high speed SDIO card at address 0001
- [ 4.345489] F1 signature read @0x18000000=0x16844330
- [ 4.350616] DHD: dongle ram size is set to 294912(orig 294912)
- [ 4.351470] wl_create_event_handler thr:5e started
- [ 4.351959] dhd_attach thr:5f started
- [ 4.352142] dhd_attach thr:60 started
- [ 4.352325] dhd_attach thr:61 started
- [ 4.352630] wifi_get_mac_addr
- [ 4.356811] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
- [ 4.356994] wifi_set_power = 0
- [ 4.874237] =========== WLAN placed in RESET ========
- [ 4.875274] fsa9480 4-0025: nothing attached, keeping ownership of port
- [ 4.876251] twl_rtc twl_rtc: setting system clock to 2012-02-04 12:53:12 UTC (1328359992)
- [ 4.877288] Freeing init memory: 276K
- [ 4.879302] init: could not import file /system/etc/init.local.rc
- [ 4.881317] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
- [ 4.891876] max17040 4-0036: online = 1 vcell = 3711250 soc = 41 status = 2 health = 1 temp = 300 charger status = 0
- [ 5.003631] keychord: using input dev tuna-gpio-keypad for fevent
- [ 5.194915] EXT4-fs (mmcblk0p10): barriers disabled
- [ 5.199523] EXT4-fs (mmcblk0p10): mounted filesystem with writeback data mode. Opts: noauto_da_alloc,barrier=0,data=writeback
- [ 5.204406] EXT4-fs (mmcblk0p12): barriers disabled
- [ 5.287780] mms_ts 3-0048: fw version 0x62 already present
- [ 5.288208] mms_ts 3-0048: Melfas MMS-series touch controller initialized
- [ 5.509460] omap-rproc omap-rproc.1: Loaded BIOS image ducati-m3.bin, size 4489868
- [ 5.509582] omap-rproc omap-rproc.1: BIOS image version is 2
- [ 5.522460] omap-iommu omap-iommu.0: iommu_get: ducati qos_request
- [ 5.537078] omap_hwmod: ipu: failed to hardreset
- [ 5.537261] omap-iommu omap-iommu.0: ducati: version 2.1
- [ 5.545532] omap-rproc omap-rproc.1: remote processor ipu is now up
- [ 5.558990] omap_rpmsg_mbox_callback: received echo reply from ipu !
- [ 5.559173] omap_rpmsg_mbox_callback: received echo reply from ipu !
- [ 5.559265] omap_rpmsg_mbox_callback: received echo reply from ipu !
- [ 5.559570] omap_rpmsg_mbox_callback: received echo reply from ipu !
- [ 5.559692] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x32
- [ 5.560028] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x33
- [ 5.560302] virtio_rpmsg_bus virtio0: creating channel rpmsg-omx addr 0x3c
- [ 5.560668] rpmsg_omx rpmsg-omx0: new OMX connection srv channel: 1024 -> 60!
- [ 6.189147] virtio_rpmsg_bus virtio1: creating channel rpmsg-omx addr 0x3c
- [ 6.189727] rpmsg_omx rpmsg-omx1: new OMX connection srv channel: 1024 -> 60!
- [ 8.420562] EXT4-fs warning (device mmcblk0p12): ext4_clear_journal_err:4153: Filesystem error recorded from previous mount: IO failure
- [ 8.420745] EXT4-fs warning (device mmcblk0p12): ext4_clear_journal_err:4154: Marking fs in need of filesystem check.
- [ 8.442077] EXT4-fs (mmcblk0p12): warning: mounting fs with errors, running e2fsck is recommended
- [ 8.463928] EXT4-fs (mmcblk0p12): recovery complete
- [ 8.470306] EXT4-fs (mmcblk0p12): mounted filesystem with writeback data mode. Opts: errors=panic,nomblk_io_submit,noauto_da_alloc,barrier=0,data=writeback
- [ 8.474029] EXT4-fs (mmcblk0p11): barriers disabled
- [ 8.642608] EXT4-fs (mmcblk0p11): recovery complete
- [ 8.664184] EXT4-fs (mmcblk0p11): mounted filesystem with writeback data mode. Opts: errors=panic,nomblk_io_submit,noauto_da_alloc,barrier=0,data=writeback
- [ 8.671600] EXT4-fs (mmcblk0p3): mounted filesystem with writeback data mode. Opts: noauto_da_alloc,data=writeback
- [ 8.684173] HDCP: loaded keys
- [ 8.722259] android_usb: already disabled
- [ 8.722717] mtp_bind_config
- [ 8.897705] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1150000 Calib=1100000
- [ 8.975708] warning: `rild' uses 32-bit capabilities (legacy support in use)
- [ 9.072448] PVR: Installing MISR with cookie c07d2df4
- [ 9.072662] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie c79b3700
- [ 9.072906] PVR: OSUnMapPhysToLin: unmapping 65535 bytes from c8be0000
- [ 9.073059] PVR: SysFinalise: Version string: SGX revision = 1.2.0
- [ 9.296386] init: sys_prop: permission denied uid:1001 name:net.rmnet1.dns1
- [ 9.296752] init: sys_prop: permission denied uid:1001 name:net.rmnet1.dns2
- [ 9.297058] init: sys_prop: permission denied uid:1001 name:net.rmnet1.gw
- [ 9.297546] init: sys_prop: permission denied uid:1001 name:net.rmnet2.dns1
- [ 9.297882] init: sys_prop: permission denied uid:1001 name:net.rmnet2.dns2
- [ 9.298126] init: sys_prop: permission denied uid:1001 name:net.rmnet2.gw
- [ 9.341918] [MODEM_IF] misc_open : umts_boot0
- [ 9.342071] omap_hsi omap_hsi.0: HSI clock is now 96000000
- [ 9.342834] omap_hsi omap_hsi.0: Entering RX wakeup in 3 wires mode (no CAWAKE)
- [ 9.342987] [MODEM_IF] xmm6260_off()
- [ 9.343109] [MODEM_IF] xmm6260_on()
- [ 9.343811] [MODEM_IF] PA EVENT : reset =0, pa=1
- [ 9.343872] [MODEM_IF] umts_ipc0 state changed: OFFLINE
- [ 9.460723] [MODEM_IF] PA EVENT : reset =1, pa=0
- [ 9.838470] [MODEM_IF] misc_release : umts_boot0
- [ 9.838745] omap_hsi omap_hsi.0: hsi_write_cancel ch 0
- [ 9.838897] omap_hsi omap_hsi.0: __hsi_write_cancel : -125
- [ 9.839172] omap_hsi omap_hsi.0: hsi_read_cancel ch 0
- [ 9.839324] omap_hsi omap_hsi.0: __hsi_read_cancel : -125
- [ 9.839477] omap_hsi omap_hsi.0: __hsi_write_cancel : -61
- [ 9.839721] omap_hsi omap_hsi.0: __hsi_read_cancel : -61
- [ 9.839904] [MODEM_IF] misc_open : umts_boot1
- [ 9.840209] omap_hsi omap_hsi.0: Entering RX wakeup in 4 wires mode
- [ 9.993194] misc dsscomp: [c71b1400] ignoring set failure -22
- [ 10.226226] s6e8aa: d/b 1, p 1, b-01390ffb
- [ 10.226226] s6e8aa: c0, 1, b-00241f58, got v 3481363, factory wants 3475797
- [ 10.226257] s6e8aa: c1, 1, b-007bf1db, got v 3695942, factory wants 3687357
- [ 10.226287] s6e8aa: c2, 1, b-001f1837, got v 3448108, factory wants 3442717
- [ 10.226287] s6e8aa: d/b 1, p 2, b-044d7cf9
- [ 10.226318] s6e8aa: c0, 2, b-00fbe13e, got v 3306934, factory wants 3299741
- [ 10.226318] s6e8aa: c1, 2, b-01d46b1f, got v 3520050, factory wants 3509795
- [ 10.226348] s6e8aa: c2, 2, b-00cd583e, got v 3271244, factory wants 3263296
- [ 10.226379] s6e8aa: d/b 1, p 3, b-0b323808
- [ 10.226379] s6e8aa: c0, 3, b-02fdec9f, got v 3173849, factory wants 3164351
- [ 10.226409] s6e8aa: c1, 3, b-0417534f, got v 3395524, factory wants 3384247
- [ 10.226440] s6e8aa: c2, 3, b-026d39ad, got v 3129414, factory wants 3119524
- [ 10.226440] s6e8aa: d/b 1, p 4, b-186611f4
- [ 10.226470] s6e8aa: c0, 4, b-07cc45d4, got v 3025194, factory wants 3012976
- [ 10.226470] s6e8aa: c1, 4, b-08b889a1, got v 3259092, factory wants 3245046
- [ 10.226501] s6e8aa: c2, 4, b-0601b7bc, got v 2980530, factory wants 2967500
- [ 10.226531] s6e8aa: d/b 1, p 5, b-6840e4ff
- [ 10.226531] s6e8aa: c0, 5, b-2a37b3ea, got v 2621955, factory wants 2598473
- [ 10.226562] s6e8aa: c1, 5, b-2f60bb82, got v 2826315, factory wants 2802526
- [ 10.226562] s6e8aa: c2, 5, b-2218db70, got v 2545369, factory wants 2521423
- [ 10.226593] s6e8aa: d/b 1, p 6, b-ffffffff
- [ 10.226623] s6e8aa: c0, 6, b-6f7a2e79, got v 2215272, factory wants 2177333
- [ 10.226654] s6e8aa: c1, 6, b-787edc87, got v 2417793, factory wants 2376667
- [ 10.226654] s6e8aa: c2, 6, b-5c202a03, got v 2115838, factory wants 2077667
- [ 13.673339] [MODEM_IF] misc_release : umts_boot1
- [ 13.673492] omap_hsi omap_hsi.0: hsi_write_cancel ch 0
- [ 13.673553] omap_hsi omap_hsi.0: __hsi_write_cancel : -61
- [ 13.673614] omap_hsi omap_hsi.0: hsi_read_cancel ch 0
- [ 13.673797] omap_hsi omap_hsi.0: __hsi_read_cancel : -125
- [ 13.673858] omap_hsi omap_hsi.0: __hsi_write_cancel : -61
- [ 13.673980] omap_hsi omap_hsi.0: __hsi_read_cancel : -61
- [ 13.674407] [MODEM_IF] misc_open : umts_ipc0
- [ 13.674621] omap_hsi omap_hsi.0: Entering RX wakeup in 4 wires mode
- [ 13.674713] [MODEM_IF] misc_open : umts_rfs0
- [ 13.775177] [MODEM_IF] PA EVENT : reset =1, pa=1
- [ 13.775268] [MODEM_IF] umts_ipc0 state changed: ONLINE
- [ 18.248229] drivers/misc/inv_mpu/mldl_cfg.c|inv_mpu_get_slave_config|1792 returning 4
- [ 34.654602] request_suspend_state: wakeup (3->0) at 34647644045 (2012-02-04 12:53:42.267608643 UTC)
- [ 35.020294] acc_open
- [ 35.020355] acc_release
- [ 35.200073]
- [ 35.200103] Dongle Host Driver, version 5.90.125.94.1
- [ 35.200103] Compiled in drivers/net/wireless/bcmdhd on Feb 1 2012 at 19:21:35
- [ 35.200408] wl_android_wifi_on in
- [ 35.200469] wifi_set_power = 1
- [ 35.717956] =========== WLAN going back to live ========
- [ 35.718109] sdio_reset_comm():
- [ 35.785095] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
- [ 35.939422] wifi_get_mac_addr
- [ 35.940093] Firmware up: op_mode=1, Broadcom Dongle Host Driver mac=a0:0b:ba:c3:b3:7e
- [ 36.040679] dhd_rx_frame: net device is NOT registered yet. drop packet
- [ 36.040832] dhd_rx_frame: net device is NOT registered yet. drop packet
- [ 36.043670] Firmware version = wl0: Nov 11 2011 17:49:28 version 5.90.125.94.1
- [ 37.275787] NOHZ: local_softirq_pending 08
- [ 37.280883] NOHZ: local_softirq_pending 08
- [ 37.382446] wl_bss_connect_done succeeded status=(0x9)
- [ 37.435638] wl_bss_connect_done succeeded status=(0x11)
- [ 37.831024] nfc_power_apply ON
- [ 37.859710] nfc_power_apply OFF
- [ 37.931579] nfc_power_apply ON
- [ 38.574340] omap_hsi omap_hsi.0: Disabling clocks with HST FSM not IDLE !
- [ 48.054626] wlan0: no IPv6 routers present
- [ 50.572509] rpmsg_omx rpmsg-omx1: local addr assigned: 0x401
- [ 50.572631] omap-iommu omap-iommu.0: iommu_get: ducati qos_request
- [ 50.586761] omap_hwmod: ipu: failed to hardreset
- [ 50.596557] omap-iommu omap-iommu.0: ducati: version 2.1
- [ 50.707122] rpmsg_omx rpmsg6: conn rsp: status 0 addr 101
- [ 50.743438] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1250000 Calib=1101460
- [ 50.783081] rpmsg_omx rpmsg-omx1: Disconnecting from OMX service at 101
- [ 51.155548] binder: send failed reply for transaction 13702 to 812:831
- [ 51.197387] binder: release proc 812, transaction 13724, not freed
- [ 54.250213] binder: release proc 780, transaction 16151, not freed
- [ 59.100860] max17040 4-0036: online = 1 vcell = 3640000 soc = 40 status = 2 health = 1 temp = 310 charger status = 0
- [ 60.783996] binder: release proc 1020, transaction 21250, not freed
- [ 61.415435] binder: 1405:1414 refcount change on invalid ref 9
- [ 61.418273] binder: 1405:1414 refcount change on invalid ref 14
- [ 72.419158] binder: 453:1266 transaction failed 29189, size 324-0
- [ 73.108428] request_suspend_state: sleep (0->3) at 73101470950 (2012-02-04 12:54:20.721435548 UTC)
- [ 73.121307] dhd_set_suspend: force extra Suspend setting
- [ 73.134063] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=1 Listen=10
- [ 73.138092] DSSCOMP: dsscomp_early_suspend
- [ 73.142700] DSSCOMP: blanked screen
- [ 73.353942] omap_hsi omap_hsi.0: Disabling clocks with HST FSM not IDLE !
- [ 73.898437] request_suspend_state: wakeup (3->0) at 73891479494 (2012-02-04 12:54:21.511444092 UTC)
- [ 73.923553] omap_hsi omap_hsi.0: Disabling clocks with HST FSM not IDLE !
- [ 76.054443] DSSCOMP: dsscomp_late_resume
- [ 77.004852] request_suspend_state: sleep (0->3) at 76997863772 (2012-02-04 12:54:24.617828370 UTC)
- [ 77.031249] dhd_set_suspend: force extra Suspend setting
- [ 77.048492] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=1 Listen=10
- [ 77.057220] DSSCOMP: dsscomp_early_suspend
- [ 77.072021] DSSCOMP: blanked screen
- [ 77.266113] request_suspend_state: wakeup (3->0) at 77259124759 (2012-02-04 12:54:24.879089357 UTC)
- [ 77.803771] DSSCOMP: dsscomp_late_resume
- [ 80.405090] omap_hsi omap_hsi.0: Disabling clocks with HST FSM not IDLE !
- [ 87.172698] binder: release 1791:1791 transaction 41530 out, still active
- [ 87.173309] binder: 205:217 transaction failed 29189, size 15428-0
- [ 87.173370] binder: send failed reply for transaction 41530, target dead
- [ 121.554107] max17040 4-0036: online = 1 vcell = 3677500 soc = 40 status = 2 health = 1 temp = 320 charger status = 0
- [ 181.585418] max17040 4-0036: online = 1 vcell = 3717500 soc = 39 status = 2 health = 1 temp = 320 charger status = 0
- [ 192.285217] request_suspend_state: sleep (0->3) at 192278228762 (2012-02-04 12:56:19.630802734 UTC)
- [ 192.298675] dhd_set_suspend: force extra Suspend setting
- [ 192.322998] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=1 Listen=10
- [ 192.327972] DSSCOMP: dsscomp_early_suspend
- [ 192.335388] DSSCOMP: blanked screen
- [ 192.451660] omap_hsi omap_hsi.0: Disabling clocks with HST FSM not IDLE !
- [ 193.039337] PM: Syncing filesystems ... done.
- [ 193.050018] PM: Preparing system for mem sleep
- [ 193.055664] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 193.077667] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- [ 193.101867] PM: Entering mem sleep
- [ 193.109100] PVR: PVRSRVDriverSuspend(pDevice=c78baa00)
- [ 193.109283] PVR: SysSystemPrePowerState: Entering state D3
- [ 193.109374] PVR: Uninstalling device LISR on IRQ 53 with cookie c79b3700
- [ 193.109558] PVR: DisableSystemClocks: Disabling System Clocks
- [ 193.113800] PM: suspend of devices complete after 10.650 msecs
- [ 193.114898] PM: late suspend of devices complete after 0.946 msecs
- [ 193.115020] Disabling non-boot CPUs ...
- [ 196.552032] Resume caused by IRQ 39, TWL6030-PIH
- [ 196.552185] Successfully put all powerdomains to target state
- [ 196.552368] Suspended for 3.404 seconds
- [ 196.552673] Enabling non-boot CPUs ...
- [ 196.623870] CPU1 is up
- [ 196.625091] PM: early resume of devices complete after 1.129 msecs
- [ 196.740814] PVR: PVRSRVDriverResume(pDevice=c78baa00)
- [ 196.740936] PVR: SysSystemPostPowerState: Entering state D0
- [ 196.741119] PVR: EnableSystemClocks: Enabling System Clocks
- [ 196.741210] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie c79b3700
- [ 196.741455] wakeup wake lock: musb_autosuspend_wake_lock
- [ 196.764434] PM: resume of devices complete after 138.946 msecs
- [ 196.764984] PM: Finishing wakeup.
- [ 196.765075] Restarting tasks ...
- [ 196.765441] hub 1-0:1.0: activate --> -22
- [ 196.771209] done.
- [ 196.771575] suspend: exit suspend, ret = 0 (2012-02-04 12:56:24.117191887 UTC)
- [ 196.791534] PM: Syncing filesystems ... done.
- [ 196.802062] PM: Preparing system for mem sleep
- [ 196.802581] Freezing user space processes ...
- [ 196.806671] active wake lock alarm_rtc, time left 125
- [ 196.806854]
- [ 196.807006] Freezing of user space aborted
- [ 196.807556]
- [ 196.807647] Restarting tasks ... done.
- [ 196.812072] suspend: exit suspend, ret = -16 (2012-02-04 12:56:24.157658194 UTC)
- [ 197.686462] PM: Syncing filesystems ... done.
- [ 197.703247] PM: Preparing system for mem sleep
- [ 197.704437] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 197.732910] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- [ 197.756469] PM: Entering mem sleep
- [ 197.763610] PVR: PVRSRVDriverSuspend(pDevice=c78baa00)
- [ 197.763916] PVR: SysSystemPrePowerState: Entering state D3
- [ 197.764038] PVR: Uninstalling device LISR on IRQ 53 with cookie c79b3700
- [ 197.764221] PVR: DisableSystemClocks: Disabling System Clocks
- [ 197.768463] PM: suspend of devices complete after 10.711 msecs
- [ 197.769561] PM: late suspend of devices complete after 0.946 msecs
- [ 197.769561] Disabling non-boot CPUs ...
- [ 208.536163] Resume caused by wakeup I/O pad: CONTROL_WKUP_PADCONF_WAKEUPEVENT_0[12]
- [ 208.536285] Successfully put all powerdomains to target state
- [ 208.536499] Suspended for 10.757 seconds
- [ 208.536743] Enabling non-boot CPUs ...
- [ 208.576843] CPU1 is up
- [ 208.578002] PM: early resume of devices complete after 1.129 msecs
- [ 208.578491] wakeup wake lock: gpio_input
- [ 208.693695] PVR: PVRSRVDriverResume(pDevice=c78baa00)
- [ 208.693786] PVR: SysSystemPostPowerState: Entering state D0
- [ 208.693969] PVR: EnableSystemClocks: Enabling System Clocks
- [ 208.694061] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie c79b3700
- [ 208.717285] PM: resume of devices complete after 138.977 msecs
- [ 208.717712] PM: Finishing wakeup.
- [ 208.717864] Restarting tasks ...
- [ 208.718139] hub 1-0:1.0: activate --> -22
- [ 208.723480] done.
- [ 208.723876] suspend: exit suspend, ret = 0 (2012-02-04 12:56:36.069462389 UTC)
- [ 208.762481] PM: Syncing filesystems ... done.
- [ 208.776336] PM: Preparing system for mem sleep
- [ 208.777008] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 208.802276] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- [ 208.826507] PM: Entering mem sleep
- [ 208.833740] PVR: PVRSRVDriverSuspend(pDevice=c78baa00)
- [ 208.834075] PVR: SysSystemPrePowerState: Entering state D3
- [ 208.834167] PVR: Uninstalling device LISR on IRQ 53 with cookie c79b3700
- [ 208.834350] PVR: DisableSystemClocks: Disabling System Clocks
- [ 208.838623] PM: suspend of devices complete after 10.833 msecs
- [ 208.839721] PM: late suspend of devices complete after 0.946 msecs
- [ 208.839721] Disabling non-boot CPUs ...
- [ 208.904449] Resume caused by wakeup I/O pad: CONTROL_WKUP_PADCONF_WAKEUPEVENT_0[12]
- [ 208.904632] Successfully put all powerdomains to target state
- [ 208.904785] Suspended for 0.055 seconds
- [ 208.905059] Enabling non-boot CPUs ...
- [ 208.937316] CPU1 is up
- [ 208.938476] PM: early resume of devices complete after 1.037 msecs
- [ 208.938964] wakeup wake lock: gpio_input
- [ 209.040557] PVR: PVRSRVDriverResume(pDevice=c78baa00)
- [ 209.040679] PVR: SysSystemPostPowerState: Entering state D0
- [ 209.040832] PVR: EnableSystemClocks: Enabling System Clocks
- [ 209.040954] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie c79b3700
- [ 209.062072] PM: resume of devices complete after 123.291 msecs
- [ 209.062499] PM: Finishing wakeup.
- [ 209.062652] Restarting tasks ...
- [ 209.062957] hub 1-0:1.0: activate --> -22
- [ 209.075958] done.
- [ 209.076202] suspend: exit suspend, ret = 0 (2012-02-04 12:56:36.421787822 UTC)
- [ 209.093475] PM: Syncing filesystems ... done.
- [ 209.111663] PM: Preparing system for mem sleep
- [ 209.112152] Freezing user space processes ... (elapsed 0.01 seconds) done.
- [ 209.132232] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- [ 209.154998] PM: Entering mem sleep
- [ 209.162048] PVR: PVRSRVDriverSuspend(pDevice=c78baa00)
- [ 209.162231] PVR: SysSystemPrePowerState: Entering state D3
- [ 209.162322] PVR: Uninstalling device LISR on IRQ 53 with cookie c79b3700
- [ 209.162567] PVR: DisableSystemClocks: Disabling System Clocks
- [ 209.166870] PM: suspend of devices complete after 10.620 msecs
- [ 209.167968] PM: late suspend of devices complete after 0.946 msecs
- [ 209.168151] Disabling non-boot CPUs ...
- [ 221.552032] Resume caused by IRQ 39, TWL6030-PIH
- [ 221.552154] Successfully put all powerdomains to target state
- [ 221.552368] Suspended for 12.336 seconds
- [ 221.552612] Enabling non-boot CPUs ...
- [ 221.576843] CPU1 is up
- [ 221.578033] PM: early resume of devices complete after 1.129 msecs
- [ 221.687225] PVR: PVRSRVDriverResume(pDevice=c78baa00)
- [ 221.687408] PVR: SysSystemPostPowerState: Entering state D0
- [ 221.687499] PVR: EnableSystemClocks: Enabling System Clocks
- [ 221.687683] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie c79b3700
- [ 221.687866] wakeup wake lock: musb_autosuspend_wake_lock
- [ 221.710784] PM: resume of devices complete after 132.415 msecs
- [ 221.711212] PM: Finishing wakeup.
- [ 221.711364] Restarting tasks ...
- [ 221.711669] hub 1-0:1.0: activate --> -22
- [ 221.723663] done.
- [ 221.724090] suspend: exit suspend, ret = 0 (2012-02-04 12:56:49.069645481 UTC)
- [ 221.744476] PM: Syncing filesystems ... done.
- [ 221.757141] PM: Preparing system for mem sleep
- [ 221.757751] Freezing user space processes ...
- [ 221.761627] active wake lock alarm_rtc, time left 125
- [ 221.761871]
- [ 221.761962] Freezing of user space aborted
- [ 221.762664]
- [ 221.762756] Restarting tasks ... done.
- [ 221.766998] suspend: exit suspend, ret = -16 (2012-02-04 12:56:49.112553197 UTC)
- [ 222.478698] PM: Syncing filesystems ... done.
- [ 222.490295] PM: Preparing system for mem sleep
- [ 222.490661] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 222.515441] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- [ 222.538879] PM: Entering mem sleep
- [ 222.546081] PVR: PVRSRVDriverSuspend(pDevice=c78baa00)
- [ 222.546325] PVR: SysSystemPrePowerState: Entering state D3
- [ 222.546447] PVR: Uninstalling device LISR on IRQ 53 with cookie c79b3700
- [ 222.546600] PVR: DisableSystemClocks: Disabling System Clocks
- [ 222.550964] PM: suspend of devices complete after 10.772 msecs
- [ 222.552001] PM: late suspend of devices complete after 0.946 msecs
- [ 222.552001] Disabling non-boot CPUs ...
- [ 223.121459] Resume caused by IRQ 162, bcmsdh_sdmmc
- [ 223.121582] Successfully put all powerdomains to target state
- [ 223.121795] Suspended for 0.568 seconds
- [ 223.122009] Enabling non-boot CPUs ...
- [ 223.145233] CPU1 is up
- [ 223.146453] PM: early resume of devices complete after 1.190 msecs
- [ 223.254760] wakeup wake lock: wlan_wake
- [ 223.256256] PVR: PVRSRVDriverResume(pDevice=c78baa00)
- [ 223.256378] PVR: SysSystemPostPowerState: Entering state D0
- [ 223.256530] PVR: EnableSystemClocks: Enabling System Clocks
- [ 223.256622] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie c79b3700
- [ 223.279174] PM: resume of devices complete after 132.415 msecs
- [ 223.279693] PM: Finishing wakeup.
- [ 223.279876] Restarting tasks ...
- [ 223.280181] hub 1-0:1.0: activate --> -22
- [ 223.288360] done.
- [ 223.288635] suspend: exit suspend, ret = 0 (2012-02-04 12:56:50.634220670 UTC)
- [ 223.288818] active wake lock musb_autosuspend_wake_lock
- [ 223.288940] active wake lock wlan_rx_wake, time left 124
- [ 224.351898] PM: Syncing filesystems ... done.
- [ 224.362762] PM: Preparing system for mem sleep
- [ 224.363250] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 224.388397] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- [ 224.411895] PM: Entering mem sleep
- [ 224.419128] PVR: PVRSRVDriverSuspend(pDevice=c78baa00)
- [ 224.419311] PVR: SysSystemPrePowerState: Entering state D3
- [ 224.419433] PVR: Uninstalling device LISR on IRQ 53 with cookie c79b3700
- [ 224.419586] PVR: DisableSystemClocks: Disabling System Clocks
- [ 224.423889] PM: suspend of devices complete after 10.742 msecs
- [ 224.424987] PM: late suspend of devices complete after 0.946 msecs
- [ 224.424987] Disabling non-boot CPUs ...
- [ 283.862884] Resume caused by IRQ 162, bcmsdh_sdmmc
- [ 283.863006] Successfully put all powerdomains to target state
- [ 283.863220] Suspended for 59.429 seconds
- [ 283.863372] wakeup wake lock: alarm
- [ 283.863586] Enabling non-boot CPUs ...
- [ 283.981353] CPU1 is up
- [ 283.982543] PM: early resume of devices complete after 1.159 msecs
- [ 284.091461] PVR: PVRSRVDriverResume(pDevice=c78baa00)
- [ 284.091644] PVR: SysSystemPostPowerState: Entering state D0
- [ 284.091735] PVR: EnableSystemClocks: Enabling System Clocks
- [ 284.091918] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie c79b3700
- [ 284.114379] PM: resume of devices complete after 131.530 msecs
- [ 284.114898] PM: Finishing wakeup.
- [ 284.114990] Restarting tasks ...
- [ 284.115325] hub 1-0:1.0: activate --> -22
- [ 284.125579] done.
- [ 284.125915] suspend: exit suspend, ret = 0 (2012-02-04 12:57:51.471500935 UTC)
- [ 284.126098] active wake lock max17040-battery
- [ 284.126190] active wake lock PowerManagerService
- [ 284.126281] active wake lock musb_autosuspend_wake_lock
- [ 284.126434] active wake lock wlan_rx_wake, time left 124
- [ 284.150299] max17040 4-0036: online = 1 vcell = 3767500 soc = 39 status = 2 health = 1 temp = 300 charger status = 0
- [ 285.780761] PM: Syncing filesystems ... done.
- [ 285.791320] PM: Preparing system for mem sleep
- [ 285.791748] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 285.817474] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- [ 285.840087] PM: Entering mem sleep
- [ 285.847198] PVR: PVRSRVDriverSuspend(pDevice=c78baa00)
- [ 285.847320] PVR: SysSystemPrePowerState: Entering state D3
- [ 285.847534] PVR: Uninstalling device LISR on IRQ 53 with cookie c79b3700
- [ 285.847656] PVR: DisableSystemClocks: Disabling System Clocks
- [ 285.851989] PM: suspend of devices complete after 10.589 msecs
- [ 285.853027] PM: late suspend of devices complete after 0.946 msecs
- [ 285.853210] Disabling non-boot CPUs ...
- [ 287.879852] Resume caused by IRQ 163, gpio_keys
- [ 287.879974] Successfully put all powerdomains to target state
- [ 287.880187] Suspended for 2.017 seconds
- [ 287.880432] Enabling non-boot CPUs ...
- [ 287.939880] CPU1 is up
- [ 287.941040] PM: early resume of devices complete after 1.129 msecs
- [ 287.941558] wakeup wake lock: gpio_input
- [ 288.053985] PVR: PVRSRVDriverResume(pDevice=c78baa00)
- [ 288.054077] PVR: SysSystemPostPowerState: Entering state D0
- [ 288.054260] PVR: EnableSystemClocks: Enabling System Clocks
- [ 288.054351] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie c79b3700
- [ 288.077484] PM: resume of devices complete after 136.108 msecs
- [ 288.078002] PM: Finishing wakeup.
- [ 288.078155] Restarting tasks ...
- [ 288.078521] hub 1-0:1.0: activate --> -22
- [ 288.084014] request_suspend_state: wakeup (3->0) at 199507812501 (2012-02-04 12:57:55.429600293 UTC)
- [ 288.093566] done.
- [ 288.093811] suspend: exit suspend, ret = 0 (2012-02-04 12:57:55.439396437 UTC)
- [ 288.093994] active wake lock PowerManagerService
- [ 288.094116] active wake lock main
- [ 288.817443] DSSCOMP: dsscomp_late_resume
- [ 288.820037] omap_hsi omap_hsi.0: Disabling clocks with HST FSM not IDLE !
- [ 320.154022] fsa9480 4-0025: cable detect change, from 'unknown/none' to 'usb-peripheral'
- [ 320.702514] android_work: sent uevent USB_STATE=CONNECTED
- [ 320.709197] android_work: sent uevent USB_STATE=DISCONNECTED
- [ 320.795440] android_work: sent uevent USB_STATE=CONNECTED
- [ 320.999725] android_work: sent uevent USB_STATE=DISCONNECTED
- [ 321.029510] android_work: sent uevent USB_STATE=CONNECTED
- [ 321.034454] android_work: sent uevent USB_STATE=DISCONNECTED
- [ 321.197662] max17040 4-0036: online = 1 vcell = 3757500 soc = 39 status = 1 health = 1 temp = 310 charger status = 0
- [ 321.217529] android_work: sent uevent USB_STATE=CONNECTED
- [ 321.616180] android_usb gadget: high speed config #1: android
- [ 321.616363] android_work: sent uevent USB_STATE=CONFIGURED
- [ 321.744689] mtp_open
- [ 351.890624] request_suspend_state: sleep (0->3) at 263314392093 (2012-02-04 12:58:59.236179885 UTC)
- [ 351.903533] dhd_set_suspend: force extra Suspend setting
- [ 351.936065] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=1 Listen=10
- [ 351.951934] DSSCOMP: dsscomp_early_suspend
- [ 351.957214] DSSCOMP: blanked screen
- [ 352.049499] omap_hsi omap_hsi.0: Disabling clocks with HST FSM not IDLE !
- [ 382.092681] max17040 4-0036: online = 1 vcell = 3845000 soc = 39 status = 1 health = 1 temp = 310 charger status = 0
- [ 397.577056] EXT4-fs (mmcblk0p12): error count: 12
- [ 397.577148] EXT4-fs (mmcblk0p12): initial error at 1327675969: ext4_ext_insert_index:798: inode 553806
- [ 397.577484] EXT4-fs (mmcblk0p12): last error at 1328359975: ext4_ext_insert_index:798: inode 464357
- [ 451.237548] max17040 4-0036: online = 1 vcell = 3852500 soc = 39 status = 1 health = 1 temp = 310 charger status = 0
- [ 501.276977] max17040 4-0036: online = 1 vcell = 3855000 soc = 40 status = 1 health = 1 temp = 310 charger status = 0
- [ 551.318756] max17040 4-0036: online = 1 vcell = 3857500 soc = 40 status = 1 health = 1 temp = 310 charger status = 0
- [ 601.359558] max17040 4-0036: online = 1 vcell = 3860000 soc = 40 status = 1 health = 1 temp = 300 charger status = 0
- [ 651.424896] max17040 4-0036: online = 1 vcell = 3862500 soc = 40 status = 1 health = 1 temp = 300 charger status = 0
- [ 701.482238] max17040 4-0036: online = 1 vcell = 3862500 soc = 41 status = 1 health = 1 temp = 300 charger status = 0
- [ 751.518829] max17040 4-0036: online = 1 vcell = 3845000 soc = 41 status = 1 health = 1 temp = 300 charger status = 0
- [ 811.240020] max17040 4-0036: online = 1 vcell = 3842500 soc = 41 status = 1 health = 1 temp = 300 charger status = 0
- [ 861.280212] max17040 4-0036: online = 1 vcell = 3832500 soc = 41 status = 1 health = 1 temp = 310 charger status = 0
- [ 911.337554] max17040 4-0036: online = 1 vcell = 3835000 soc = 41 status = 1 health = 1 temp = 310 charger status = 0
- [ 961.382659] max17040 4-0036: online = 1 vcell = 3835000 soc = 42 status = 1 health = 1 temp = 310 charger status = 0
- [ 975.606628] EXT4-fs error (device mmcblk0p12): ext4_ext_insert_index:798: inode #464358: comm flush-179:0: ix > EXT_LAST_INDEX!
- [ 975.606842] Aborting journal on device mmcblk0p12-8.
- [ 975.818450] Kernel panic - not syncing: EXT4-fs (device mmcblk0p12): panic forced after error
- [ 975.818481]
- [ 975.818725] Backtrace:
- [ 975.819030] Function entered at [<c0057be8>] from [<c05d0f48>]
- [ 975.819152] r7:0000031e r6:00000000 r5:00000000 r4:c075b5c0
- [ 975.819671] Function entered at [<c05d0f30>] from [<c05d0fd4>]
- [ 975.819763] Function entered at [<c05d0f4c>] from [<c0182670>]
- [ 975.819946] r3:88010c40 r2:00000000 r1:c2800384 r0:c065830c
- [ 975.820343] Function entered at [<c0182600>] from [<c01829cc>]
- [ 975.820526] r5:00000000 r4:c75cfc88
- [ 975.820770] Function entered at [<c018291c>] from [<c0188fbc>]
- [ 975.820922] r8:c75cfc88 r7:c4887500 r6:00000000 r5:00000000 r4:00000000
- [ 975.821411] Function entered at [<c01880f0>] from [<c018b4b4>]
- [ 975.821563] Function entered at [<c018a0a0>] from [<c01737f0>]
- [ 975.821655] Function entered at [<c017369c>] from [<c017647c>]
- [ 975.821807] Function entered at [<c01763d4>] from [<c01770c8>]
- [ 975.821899] Function entered at [<c0176e58>] from [<c00eb488>]
- [ 975.822052] Function entered at [<c00eb454>] from [<c0139ee0>]
- [ 975.822143] Function entered at [<c0139dcc>] from [<c013a7bc>]
- [ 975.822296] Function entered at [<c013a62c>] from [<c013aea0>]
- [ 975.822387] Function entered at [<c013ae18>] from [<c013b158>]
- [ 975.822570] Function entered at [<c013af84>] from [<c013b368>]
- [ 975.822631] Function entered at [<c013b164>] from [<c013b418>]
- [ 975.822784] Function entered at [<c013b37c>] from [<c00b8244>]
- [ 975.822875] Function entered at [<c00b81b4>] from [<c009f9a4>]
- [ 975.823059] r7:00000013 r6:c009f9a4 r5:c00b81b4 r4:c78d7f10
- [ 975.823455] CPU0: stopping
- [ 975.823638] Backtrace:
- [ 975.823791] Function entered at [<c0057be8>] from [<c05d0f48>]
- [ 975.823883] r7:00000000 r6:c004bce4 r5:c070f388 r4:c06fa000
- [ 975.824371] Function entered at [<c05d0f30>] from [<c004d394>]
- [ 975.824462] Function entered at [<c004d204>] from [<c0053708>]
- [ 975.824615] Exception stack(0xc06fbee8 to 0xc06fbf30)
- [ 975.824707] bee0: c06fbf30 00000000 c06fbf30 3b9aca00 c10ec120 c06fbf30
- [ 975.824890] bf00: 9400402f 000000ce 940eafac 000000ce 00000000 c06fbf64 00000377 c06fbf30
- [ 975.825042] bf20: c0082e8c c006ddec 80000113 ffffffff
- [ 975.825134] Function entered at [<c006ddac>] from [<c03ee630>]
- [ 975.825286] r9:412fc09a r8:8000406a r7:c06fa000 r6:c07dc344 r5:c10ec130
- [ 975.825714] r4:c10ec120
- [ 975.825927] Function entered at [<c03ee59c>] from [<c0055208>]
- [ 975.826110] r9:412fc09a r8:8000406a r7:c0716e9c r6:c05db5bc r5:c0759690
- [ 975.826568] r4:c06fa000
- [ 975.826812] Function entered at [<c0055128>] from [<c05c3d00>]
- [ 975.826904] r7:00000000 r6:c0041774 r5:00000000 r4:c06fa000
- [ 975.827392] Function entered at [<c05c3c54>] from [<c0008b28>]
- [ 975.827484] r5:00000000 r4:c070f1e8
- [ 975.827789] Function entered at [<c0008874>] from [<80008040>]
- [ 975.827880] Rebooting in 5 seconds..
- [ 980.108489] Restarting Linux version 3.0.18-franco.Kernel-nightly-15.2 ([email protected]) (gcc version 4.4.3 (GCC) ) #47 SMP PREEMPT Wed Feb 1 19:33:30 WET 2012
- [ 980.108489]
- No errors detected
- Boot info:
- Last reset was warm software reset (PRM_RSTST=0x2)
Advertisement
Add Comment
Please, Sign In to add comment