GoFlex NET Serial connection output

U-Boot 2011.12 (Apr 18 2012 - 23:08:20)
Seagate GoFlexNet

SoC:   Kirkwood 88F6281_A1
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0
(Re)start USB...
USB:   Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 1 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
** Block device usb 0 not supported

** Invalid boot device **
Creating 1 MTD partitions on "nand0":
0x000002500000-0x000010000000 : "mtd=3"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    129024 bytes
UBI: smallest flash I/O unit:    2048
UBI: sub-page size:              512
UBI: VID header offset:          512 (aligned 512)
UBI: data offset:                2048
UBI: attached mtd1 to ubi0
UBI: MTD device name:            "mtd=3"
UBI: MTD device size:            219 MiB
UBI: number of good PEBs:        1752
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     0
UBI: available PEBs:             1731
UBI: total number of reserved PEBs: 21
UBI: number of PEBs reserved for bad PEB handling: 17
UBI: max/mean erase counter: 1/1
UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:rootfs", error -19
Error reading superblock on volume 'ubi:rootfs'!
** Block device usb 0 not supported
** Block device usb 1 not supported
** Block device usb 2 not supported
** Block device usb 3 not supported
** Block device usb 0 not supported
** Block device usb 0 not supported
Wrong Image Format for bootm command
ERROR: can't get kernel image!
stopping USB..
### JFFS2 loading 'uboot-original-mtd0.kwb' to 0x800000
Scanning JFFS2 FS: .....  read_nand_cached: error reading nand off 0x5f8800 size 8192 bytes
read_nand_cached: error reading nand off 0x64bc00 size 8192 bytes
read_nand_cached: error reading nand off 0x6fb600 size 8192 bytes
read_nand_cached: error reading nand off 0x769600 size 8192 bytes             .... done.
read_nand_cached: error reading nand off 0x5f8000 size 8192 bytes
off = 0x5f7f04 magic 0x1985 type 0xe002 node.totlen = 2589
read_nand_cached: error reading nand off 0x64c000 size 8192 bytes
off = 0x64bd44 magic 0x1985 type 0xe002 node.totlen = 2537
read_nand_cached: error reading nand off 0x6fc800 size 8192 bytes
read_nand_cached: error reading nand off 0x76a800 size 8192 bytes
off = 0x76a6e4 magic 0x1985 type 0xe002 node.totlen = 1474
### JFFS2 load complete: 524288 bytes loaded to 0x800000
## Starting application at 0x00800200 ...