Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.1.9-18-ARCH+ (nobody@americium) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 PREEMPT Sat Jun 2 20:07:09 UTC 2012
CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: BCM2708
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 32768
free_area_init_node: node 0, pgdat c0576b30, node_mem_map c05c8000
  Normal zone: 256 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 32512 pages, LIFO batch:7
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line: dma.dmachans=0x3c bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708.boardrev=0x2 bcm2708.serial=0xad5ceaf0 smsc95xx.macaddr=B8:27:EB:5C:EA:F0 dwc_otg.dma_enable=1 dwc_otg.dma_burst_size=256 dwc_otg.lpm_enable=0 dwc_otg.dma_enable=1 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 loglevel=2 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
allocated 524288 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 128MB = 128MB total
Memory: 123468k/123468k available, 7604k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
    vmalloc : 0xc8800000 - 0xd8000000   ( 248 MB)
    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc0534000   (5296 kB)
      .init : 0xc0534000 - 0xc0554000   ( 128 kB)
      .data : 0xc0554000 - 0xc05771c0   ( 141 kB)
       .bss : 0xc05771e4 - 0xc05c7688   ( 322 kB)
NR_IRQS:85
timer_set_mode: unhandled mode:1
timer_set_mode: unhandled mode:3
Console: colour dummy device 80x30
console [tty1] enabled
Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
hw perfevents: enabled with v6 PMU driver, 3 counters available
devtmpfs: initialized
NET: Registered protocol family 16
vc-mem: mm_vc_mem_phys_addr = 0x00000000
vc-mem: mm_vc_mem_size      = 0x10000000 (256 MiB)
hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
mailbox: Broadcom VideoCore Mailbox driver
bcm2708_vcio: mailbox at f200b880
bcm_power: Broadcom power driver
bcm_power_open() -> 0
bcm_power_request(0, 8)
bcm_mailbox_read -> 00000080, 0
bcm_power_request -> 0
Serial: AMBA PL011 UART driver
dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
console [ttyAMA0] enabled
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switching to clocksource stc
FS-Cache: Loaded
CacheFiles: Loaded
Switched to NOHz mode on CPU #0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
bcm2708_dma: DMA manager at c8808000
bcm2708_gpio: bcm2708_gpio_probe c055a448
vc-mem: Videocore memory driver
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
FS-Cache: Netfs 'nfs' registered for caching
fuse init (API version 7.17)
Btrfs loaded
msgmni has been set to 241
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
BCM2708FB: registering framebuffer (1824x984@16)
bcm2708_fb_set_par info(c7930c00) 1824x984 (1824x984), 0, 16
BCM2708FB: start = c8c00000,49387000 width=1824, height=984, bpp=16, pitch=3648 size=3620864 success=0
Console: switching to colour frame buffer device 228x61
BCM2708FB: register framebuffer (0)
brd: module loaded
loop: module loaded
vcos: [1]: vchiq_init_state: slot_zero = 0xffd80000, is_master = 0
vcos: [1]: vchiq_init_state: called
vcos: [1]: vchiq: initialised - version 2 (min 2), device 252.0
usbcore: registered new interface driver asix
usbcore: registered new interface driver smsc95xx
cdc_ncm: 04-Aug-2011
usbcore: registered new interface driver cdc_ncm
dwc_otg: version 2.90b 6-MAY-2010 (platform bus)
Core Release: 2.80a
Setting default values for core params
Finished setting default values for core params
c8840008 -> 1
Using Buffer DMA mode
Periodic Transfer Interrupt Enhancement - disabled
Multiprocessor Interrupt Enhancement - disabled
Dedicated Tx FIFOs mode
dwc_otg bcm2708_usb: DWC OTG Controller
dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
dwc_otg bcm2708_usb: irq 75, io mem 0x00000000
Init: Port Power? op_state=1
Init: Power Port (0)
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: DWC OTG Controller
usb usb1: Manufacturer: Linux 3.1.9-18-ARCH+ dwc_otg_hcd
usb usb1: SerialNumber: bcm2708_usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Module dwc_common_port init
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
mousedev: PS/2 mouse device common for all mice
Bluetooth: Virtual HCI driver ver 1.3
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
Bluetooth: HCIATH3K protocol initialized
Bluetooth: Broadcom Blutonium firmware driver ver 1.2
usbcore: registered new interface driver bcm203x
Bluetooth: Digianswer Bluetooth USB driver ver 0.10
usbcore: registered new interface driver bpa10x
Bluetooth: BlueFRITZ! USB driver ver 1.2
usbcore: registered new interface driver bfusb
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Bluetooth: Generic Bluetooth SDIO driver ver 0.1
Bluetooth: Atheros AR30xx firmware driver ver 1.0
usbcore: registered new interface driver ath3k
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
bcm_power_open() -> 1
Registered led device: mmc0::
mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
sdhci-pltfm: SDHCI platform and OF driver helper
Registered led device: led0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
Waiting for root device /dev/mmcblk0p2...
usb 1-1: new high speed USB device number 2 using dwc_otg
mmc0: Controller never released inhibit bit(s).
mmc0: problem reading SD Status register.
mmc0: new SDHC card at address 0002
mmcblk0: mmc0:0002 00000 7.41 GiB
usb 1-1: New USB device found, idVendor=0424, idProduct=9512
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 3 ports detected
usb 1-1.1: new high speed USB device number 3 using dwc_otg
usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
smsc95xx v1.0.4
smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5c:ea:f0
usb 1-1.2: new high speed USB device number 4 using dwc_otg
usb 1-1.2: New USB device found, idVendor=148f, idProduct=5370
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: Product: 802.11 n WLAN
usb 1-1.2: Manufacturer: Ralink
usb 1-1.2: SerialNumber: 1.0
usb 1-1.3: new high speed USB device number 5 using dwc_otg
usb 1-1.3: New USB device found, idVendor=1058, idProduct=1100
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: My Book
usb 1-1.3: Manufacturer: Western Digital
usb 1-1.3: SerialNumber: 57442D574341535630303232353632
scsi0 : usb-storage 1-1.3:1.0
scsi 0:0:0:0: Direct-Access     WD       3200AAV External 1.65 PQ: 0 ANSI: 4
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 21 00 00 00
sd 0:0:0:0: [sda] No Caching mode page present
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] No Caching mode page present
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2
sd 0:0:0:0: [sda] No Caching mode page present
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI disk
mmc0: Timeout waiting for hardware interrupt - cmd-18.
mmcblk0: error -110 sending stop command, original cmd response 0x920, card status 0x400900
mmcblk0: error -110 transferring data, sector 0, nr 8, cmd response 0x920, card status 0x0
mmcblk0: retrying using single block read
 mmcblk0: p1 p2
EXT4-fs (mmcblk0p2): recovery complete
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:2.
devtmpfs: mounted
Freeing init memory: 128K
EXT4-fs (mmcblk0p2): re-mounted. Opts: user_xattr,barrier=1,data=ordered
udevd[744]: starting version 184
### snd_bcm2835_alsa_probe c055ab08 ############### PROBING FOR bcm2835 ALSA device (0):(1) ###############
Creating card...
Creating device/chip ..
Adding controls ..
Registering card ....
bcm2835 ALSA CARD CREATED!
### BCM2835 ALSA driver init OK ###
cfg80211: Calling CRDA to update world regulatory domain
usb 1-1.2: reset high speed USB device number 4 using dwc_otg
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (600 mBi, 2000 mBm)
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt2800usb-phy0::radio
Registered led device: rt2800usb-phy0::assoc
Registered led device: rt2800usb-phy0::quality
usbcore: registered new interface driver rt2800usb
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p2): re-mounted. Opts: user_xattr,barrier=1,data=ordered
mmc0: missed completion of cmd 17 DMA (512/512 [1]/[1]) - ignoring it
mmc0: DMA IRQ 6 ignored - results were reset
wlan0: authenticate with 08:76:ff:89:9f:80 (try 1)
wlan0: authenticated
wlan0: associate with 08:76:ff:89:9f:80 (try 1)
wlan0: RX AssocResp from 08:76:ff:89:9f:80 (capab=0x411 status=0 aid=2)
wlan0: associated
NET: Registered protocol family 10
wlan0: no IPv6 routers present
usb 1-1.3: reset high speed USB device number 5 using dwc_otg
Alignment trap: not handling instruction e1943f9f at [<c02b1afc>]
Unhandled fault: alignment exception (0x001) at 0xc79c6433
Internal error: : 1 [#1] PREEMPT
Modules linked in: ipv6 rt2800usb rt2x00usb rt2800lib rt2x00lib crc_ccitt mac80211 cfg80211 snd_bcm2835 snd_pcm snd_page_alloc snd_timer snd soundcore
CPU: 0    Not tainted  (3.1.9-18-ARCH+ #1)
pc : [<c02b1b00>]    lr : [<c033e620>]    psr: a0000193
sp : c7923d78  ip : c7923d90  fp : c7923d8c
r10: c78ea1c0  r9 : 00000020  r8 : c78ea8c0
r7 : c7922000  r6 : c79c6433  r5 : c7939d50  r4 : c79c6433
r3 : 8ea8c0c7  r2 : c033d9ec  r1 : c7923d68  r0 : c79c6433
Flags: NzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 00c5387d  Table: 06e48008  DAC: 00000017
Process usb-storage (pid: 490, stack limit = 0xc7922268)
Stack: (0xc7923d78 to 0xc7924000)
3d60:                                                       00000000 c79c6433
3d80: c7923da4 c7923d90 c033e620 c02b1aec 00000000 c7939d40 c7923dcc c7923da8
3da0: c033dac0 c033e614 00000000 c7939d40 c79c6000 00000001 c79c6000 00000001
3dc0: c7923dec c7923dd0 c034016c c033d9d4 c7939d40 00000000 00000000 c791ef28
3de0: c7923e14 c7923df0 c03401e8 c0340120 00000000 c79c6000 c791bd60 00000000
3e00: 00000003 c791ef28 c7923e84 c7923e18 c03387d0 c03401b0 00000001 00000000
3e20: 00000000 00000000 00001388 c7923e38 00000000 0000001f c78ea8c0 c79c6128
3e40: 00000000 01120010 00000200 10584000 01651100 01030201 c7923e84 c791bd60
3e60: 00000001 c79c6000 c79c7850 c79c7800 c796ce70 0000001f c7923eac c7923e88
3e80: c03389b4 c0338488 00000010 c796ce70 00000000 c796cf28 00000000 00000003
3ea0: c7923ec4 c7923eb0 c03676ec c0338918 c7964940 c7922000 c7923f54 c7923ec8
3ec0: c0367878 c036769c c7923efc c7923ed8 c0010270 c0011630 00000000 c001b788
3ee0: c7923f54 c7923f18 c001b788 c047cf88 c7923f14 c7923f00 c7923f24 c7923f08
3f00: c0011648 c0010210 c0010234 c7922000 00000001 c796cf28 c7923f4c c7923f28
3f20: c0010270 c0011630 00000000 c796ce70 c7922000 c796cf28 00000000 00000002
3f40: ffffff80 0000001f c7923f64 c7923f58 c0366740 c0367708 c7923fbc c7923f68
3f60: c0368c6c c036673c 00000013 00000000 00000000 00000000 c7923f9c c7923f88
3f80: c047cf10 c7887c0c c796ce70 c0368ad4 00000013 c7887c0c c796ce70 c0368ad4
3fa0: 00000013 00000000 00000000 00000000 c7923ff4 c7923fc0 c003e1e4 c0368ae0
3fc0: c7887c0c 00000000 c796ce70 00000000 c7923fd0 c7923fd0 00000000 c7887c0c
3fe0: c003e158 c0025d84 00000000 c7923ff8 c0025d84 c003e164 00000000 00010400
Backtrace:
Function entered at [<c02b1ae0>] from [<c033e620>]
 r4:c79c6433 r3:00000000
Function entered at [<c033e608>] from [<c033dac0>]
 r4:c7939d40 r3:00000000
Function entered at [<c033d9c8>] from [<c034016c>]
 r8:00000001 r7:c79c6000 r6:00000001 r5:c79c6000 r4:c7939d40
r3:00000000
Function entered at [<c0340114>] from [<c03401e8>]
 r6:c791ef28 r5:00000000 r4:00000000 r3:c7939d40
Function entered at [<c03401a4>] from [<c03387d0>]
 r8:c791ef28 r7:00000003 r6:00000000 r5:c791bd60 r4:c79c6000
r3:00000000
Function entered at [<c033847c>] from [<c03389b4>]
Function entered at [<c033890c>] from [<c03676ec>]
 r8:00000003 r7:00000000 r6:c796cf28 r5:00000000 r4:c796ce70
r3:00000010
Function entered at [<c0367690>] from [<c0367878>]
 r5:c7922000 r4:c7964940
Function entered at [<c03676fc>] from [<c0366740>]
Function entered at [<c0366730>] from [<c0368c6c>]
Function entered at [<c0368ad4>] from [<c003e1e4>]
Function entered at [<c003e158>] from [<c0025d84>]
 r6:c0025d84 r5:c003e158 r4:c7887c0c
Code: e1a04000 e3530000 0a000005 e1943f9f (e2833001)
---[ end trace 63603982c6ce9b97 ]---
note: usb-storage[490] exited with preempt_count 1