Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ===================================================================
- MT7621 stage1 code 13:14:00 (ASIC)
- CPU=50000000 HZ BUS=16666666 HZ
- ==================================================================
- Change MPLL source from XTAL to CR...
- do MEMPLL setting..
- MEMPLL Config : 0x11100000
- 3PLL mode + External loopback
- === XTAL-40Mhz === DDR-1200Mhz ===
- PLL2 FB_DL: 0x2, 1/0 = 599/425 09000000
- PLL3 FB_DL: 0x14, 1/0 = 726/298 51000000
- PLL4 FB_DL: 0x1a, 1/0 = 671/353 69000000
- do DDR setting..[00320000]
- Apply DDR3 Setting...(use customer AC)
- 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
- --------------------------------------------------------------------------------
- 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
- 000E:| 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1
- 000F:| 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0
- 0010:| 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
- 0011:| 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- rank 0 coarse = 15
- rank 0 fine = 72
- B:| 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0
- opt_dle value:9
- DRAMC_R0DELDLY[018]=00001F20
- ==================================================================
- RX DQS perbit delay software calibration
- ==================================================================
- 1.0-15 bit dq delay value
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 15 10 15 13 14 11 15 7 6 12
- 10 | 9 13 10 13 8 14
- --------------------------------------
- ==================================================================
- 2.dqs window
- x=pass dqs delay value (min~max)center
- y=0-7bit DQ of every group
- input delay:DQS0 =32 DQS1 = 31
- ==================================================================
- bit DQS0 bit DQS1
- 0 (0~64)32 8 (1~59)30
- 1 (1~60)30 9 (1~60)30
- 2 (0~63)31 10 (1~62)31
- 3 (1~62)31 11 (1~58)29
- 4 (1~62)31 12 (1~60)30
- 5 (1~64)32 13 (1~62)31
- 6 (1~64)32 14 (1~62)31
- 7 (1~64)32 15 (1~62)31
- ==================================================================
- 3.dq delay value last
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 15 12 15 14 15 11 15 7 7 13
- 10 | 9 15 11 13 8 14
- ==================================================================
- ==================================================================
- TX perbyte calibration
- ==================================================================
- DQS loop = 15, cmp_err_1 = ffff0000
- dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1
- dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2
- DQ loop=15, cmp_err_1 = ffff01a0
- DQ loop=14, cmp_err_1 = ffff0000
- dqs_perbyte_dly.last_dqdly_pass[0]=14, finish count=1
- dqs_perbyte_dly.last_dqdly_pass[1]=14, finish count=2
- byte:0, (DQS,DQ)=(8,8)
- byte:1, (DQS,DQ)=(8,8)
- 20,data:88
- [EMI] DRAMC calibration passed
- ===================================================================
- MT7621 stage1 code done
- CPU=50000000 HZ BUS=16666666 HZ
- ===================================================================
- U-Boot 1.1.3 (Sep 25 2015 - 19:30:10)
- Board: Ralink APSoC DRAM: 128 MB
- relocate_code Pointer at: 87fb4000
- Config XHCI 40M PLL
- flash manufacture id: c2, device id 20 18
- find flash: MX25L12805D
- *** Warning - bad CRC, using default environment
- ============================================
- Ralink UBoot Version: 4.2.1.0
- --------------------------------------------
- ASIC MT7621AS (MAC to MT7530 Mode)
- DRAM_CONF_FROM: Auto-Detection
- DRAM_TYPE: DDR3
- DRAM bus: 16 bit
- Xtal Mode=3 OCP Ratio=1/3
- Flash component: SPI Flash
- Date:Sep 25 2015 Time:19:30:10
- ============================================
- icache: sets:256, ways:4, linesz:32 ,total:32768
- dcache: sets:256, ways:4, linesz:32 ,total:32768
- ##### The CPU freq = 880 MHZ ####
- estimate memory size =128 Mbytes
- Reset switch ...
- #Reset_MT7530
- set LAN/WAN LLLLW
- Example expects ABI version 2
- Actual U-Boot ABI version 2
- ******************************************
- Uboot StandAlone Entry
- ******************************************
- 0, cmd
- 1, 0x0000000D
- cmd : 0x0000000D
- Press Ctrl+C to Enter the Main loop...
- Example expects ABI version 2
- Actual U-Boot ABI version 2
- ******************************************
- Uboot StandAlone Entry
- ******************************************
- 0, cmd
- 1, 0x0000000F
- cmd : 0x0000000F
- Enter NMRP_main
- Flash Sector Number : 256.
- NetTxPacket = 0x87FE4340
- KSEG1ADDR(NetTxPacket) = 0xA7FE4340
- NetLoop,call eth_halt !
- NetLoop,call eth_init !
- Trying Eth0 (10/100-M)
- Waitting for RX_DMA_BUSY status Start... done
- ETH_STATE_ACTIVE!!
- NMRP_FLASH_SIZE_buffer --> a1000000.
- NMRP:LISTENING
- ### No NMRP Server found ###
- STANDALONE_LOAD_ADDR is 0xa0600000
- Example expects ABI version 2
- Actual U-Boot ABI version 2
- ******************************************
- Uboot StandAlone Entry
- ******************************************
- 0, boot
- Flash Sector Number : 256.
- ***************************************************
- Sercomm Boot Version 1.15.0
- ***************************************************
- Entering Firmware : Everything is OK.
- flash base: 0xbfc00000, kernel addr :0xbfc50000, bootloader size: 0x30000, config size 0x10000, fac size : 0x10000
- kernel addr :0xbfc50000
- System Boot system code via Flash.
- ## Booting image at bfc50000 ...
- Image Name: MIPS OpenWrt Linux-3.18.27
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 1198812 Bytes = 1.1 MB
- Load Address: 80001000
- Entry Point: 80001000
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- commandline in boot is : <NULL> !!!!
- No initrd
- ## Transferring control to Linux (at address 80001000) ...
- ## Giving linux memsize in MB, 128
- Starting kernel ...
- [ 0.000000] Linux version 3.18.27 (maikel@ubuntudev) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r48220) ) #4 SMP Wed Mar 23 17:12:36 CET 2016
- [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
- [ 0.000000] MIPS: machine is WNR3700v5
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 1c000000 @ 00000000 (usable)
- [ 0.000000] memory: 04000000 @ 20000000 (usable)
- [ 0.000000] debug: skip boot console de-registration.
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x0fffffff]
- [ 0.000000] HighMem [mem 0x10000000-0x23ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x1bffffff]
- [ 0.000000] node 0: [mem 0x20000000-0x23ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23ffffff]
- [ 0.000000] Detected 1 available secondary CPU(s)
- [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.000000] PERCPU: Embedded 9 pages/cpu @8148c000 s5696 r8192 d22976 u36864
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130560
- [ 0.000000] Kernel command line: console=ttyS1,57600n8 boot=/dev/mtdblock3 keep_bootcon=1 rootfstype=squashfs,jffs2
- [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Writing ErrCtl register=00040300
- [ 0.000000] Readback ErrCtl register=00040300
- [ 0.000000] Memory: 515496K/524288K available (2700K kernel code, 144K rwdata, 524K rodata, 204K init, 228K bss, 8792K reserved, 262144K highmem)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- [ 0.000000] NR_IRQS:256
- [ 0.000000] gic: revision 3.0
- [ 0.000000] CPU Clock: 880MHz
- [ 0.000000] Calibrating delay loop... 577.53 BogoMIPS (lpj=2887680)
- [ 0.060000] pid_max: default: 32768 minimum: 301
- [ 0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.090000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.090000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.090000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.090000] CPU1 revision is: 0001992f (MIPS 1004Kc)
- [ 0.190000] Synchronize counters for CPU 1: done.
- [ 0.190000] Brought up 2 CPUs
- [ 0.200000] pinctrl core: initialized pinctrl subsystem
- [ 0.210000] NET: Registered protocol family 16
- [ 0.220000] pull PCIe RST: RALINK_RSTCTRL = 0
- [ 0.520000] release PCIe RST: RALINK_RSTCTRL = 7000000
- [ 0.530000] ***** Xtal 40MHz *****
- [ 0.530000] release PCIe RST: RALINK_RSTCTRL = 7000000
- [ 0.540000] Port 0 N_FTS = 1b102800
- [ 0.540000] Port 1 N_FTS = 1b102800
- [ 0.550000] Port 2 N_FTS = 1b102800
- [ 1.690000] PCIE1 no card, disable it(RST&CLK)
- [ 1.690000] -> 12007f2
- [ 1.700000] PCIE0 enabled
- [ 1.700000] PCIE2 enabled
- [ 1.710000] PCI host bridge /pcie@1e140000 ranges:
- [ 1.710000] MEM 0x0000000060000000..0x000000006fffffff
- [ 1.720000] IO 0x000000001e160000..0x000000001e16ffff
- [ 1.760000] mt7621_gpio 1e000600.gpio: registering 32 gpios
- [ 1.770000] mt7621_gpio 1e000600.gpio: registering 32 gpios
- [ 1.780000] mt7621_gpio 1e000600.gpio: registering 32 gpios
- [ 1.790000] PCI host bridge to bus 0000:00
- [ 1.800000] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
- [ 1.810000] pci_bus 0000:00: root bus resource [io 0xffffffff]
- [ 1.820000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 1.840000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 1.860000] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 1.870000] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
- [ 1.890000] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
- [ 1.900000] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
- [ 1.910000] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
- [ 1.930000] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
- [ 1.940000] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
- [ 1.950000] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
- [ 1.970000] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
- [ 1.980000] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
- [ 1.990000] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
- [ 2.010000] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
- [ 2.020000] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 2.030000] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- [ 2.050000] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
- [ 2.060000] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff]
- [ 2.070000] pci 0000:00:01.0: PCI bridge to [bus 02]
- [ 2.080000] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff]
- [ 2.100000] BAR0 at slot 0 = 0
- [ 2.100000] bus=0x0, slot = 0x0
- [ 2.110000] BAR0 at slot 1 = 0
- [ 2.120000] bus=0x0, slot = 0x1
- [ 2.120000] bus=0x1, slot = 0x0, irq=0xff
- [ 2.130000] bus=0x2, slot = 0x1, irq=0xff
- [ 2.140000] Switched to clocksource MIPS
- [ 2.150000] NET: Registered protocol family 2
- [ 2.150000] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
- [ 2.170000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
- [ 2.180000] TCP: Hash tables configured (established 2048 bind 2048)
- [ 2.190000] TCP: reno registered
- [ 2.200000] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 2.210000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 2.220000] NET: Registered protocol family 1
- [ 2.230000] futex hash table entries: 512 (order: 3, 32768 bytes)
- [ 2.250000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 2.270000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 2.290000] msgmni has been set to 494
- [ 2.290000] bounce: pool size: 64 pages
- [ 2.300000] io scheduler noop registered
- [ 2.310000] io scheduler deadline registered (default)
- [ 2.320000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 2.330000] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 34, base_baud = 3125000) is a 16550A
- [ 2.350000] spi-mt7621 1e000b00.spi: sys_freq: 50000000
- [ 2.360000] m25p80 spi32766.0: found mx25l12805d, expected w25q128
- [ 2.380000] m25p80 spi32766.0: mx25l12805d (16384 Kbytes)
- [ 2.390000] m25p80 spi32766.0: using chunked io
- [ 2.400000] 4 ofpart partitions found on MTD device spi32766.0
- [ 2.410000] Creating 4 MTD partitions on "spi32766.0":
- [ 2.420000] 0x000000000000-0x000000030000 : "u-boot"
- [ 2.430000] 0x000000030000-0x000000040000 : "u-boot-env"
- [ 2.440000] 0x000000040000-0x000000050000 : "factory"
- [ 2.450000] 0x000000050000-0x000001000000 : "firmware"
- [ 2.510000] 2 uimage-fw partitions found on MTD device firmware
- [ 2.520000] 0x000000050000-0x0000002d0000 : "kernel"
- [ 2.530000] 0x0000002d0000-0x000001000000 : "rootfs"
- [ 2.540000] mtd: device 5 (rootfs) set to be root filesystem
- [ 2.550000] 1 squashfs-split partitions found on MTD device rootfs
- [ 2.570000] 0x0000004c0000-0x000001000000 : "rootfs_data"
- [ 2.580000] netif_napi_add() called with weight 128 on device eth%d
- [ 2.600000] change HW-TRAP to 0x17ccf
- [ 2.610000] ralink_soc_eth 1e100000.ethernet: generated random MAC address ba:92:5e:46:24:3a
- [ 2.630000] libphy: mdio: probed
- [ 2.640000] ralink_soc_eth 1e100000.ethernet: loaded mt7530 driver
- [ 2.660000] ralink_soc_eth 1e100000.ethernet eth0: ralink at 0xbe100000, irq 11
- [ 2.670000] mt7621_wdt 1e000100.wdt: Initialized
- [ 2.680000] TCP: cubic registered
- [ 2.690000] NET: Registered protocol family 17
- [ 2.700000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
- [ 2.720000] 8021q: 802.1Q VLAN Support v1.8
- [ 2.730000] Warning: unable to open an initial console.
- [ 2.750000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
- [ 2.760000] Freeing unused kernel memory: 204K (8034d000 - 80380000)
- [ 2.850000] random: nonblocking pool is initialized
- [ 3.310000] CPU 0 Unable to handle kernel paging request at virtual address ce94386c, epc == 800ba5ec, ra == 800d44bc
- [ 3.330000] Oops[#1]:
- [ 3.330000] CPU: 0 PID: 1 Comm: preinit Not tainted 3.18.27 #4
- [ 3.330000] task: 8f838000 ti: 8f82a000 task.ti: 8f82a000
- [ 3.330000] $ 0 : 00000000 00000000 cd829868 80339a30
- [ 3.330000] $ 4 : 8f802580 000000d0 ce943868 80339a30
- [ 3.330000] $ 8 : 80339a30 00000ff0 00000001 000002c3
- [ 3.330000] $12 : 7f8ff5d0 00000000 00000000 77ba9000
- [ 3.330000] $16 : 8f404770 8f802580 000000d0 8f9a3000
- [ 3.330000] $20 : 8f82bd28 ffffff69 77b8a000 7f8ff708
- [ 3.330000] $24 : 00000000 77b8d890
- [ 3.330000] $28 : 8f82a000 8f82bc88 7f8ff5b0 800d44bc
- [ 3.330000] Hi : 00000000
- [ 3.330000] Lo : 00000000
- [ 3.330000] epc : 800ba5ec kmem_cache_alloc+0x40/0x148
- [ 3.330000] Not tainted
- [ 3.330000] ra : 800d44bc __d_alloc+0x30/0x194
- [ 3.330000] Status: 11009c03 KERNEL EXL IE
- [ 3.330000] Cause : 00800008
- [ 3.330000] BadVA : ce94386c
- [ 3.330000] PrId : 0001992f (MIPS 1004Kc)
- [ 3.330000] Modules linked in:
- [ 3.330000] Process preinit (pid: 1, threadinfo=8f82a000, task=8f838000, tls=00000000)
- [ 3.330000] Stack : 80000000 afa7e9a2 7f8ffab0 8f82bd40 8f404770 8f82bdf8 80340000 800d44bc
- 00000004 8f404770 8f82bdf8 80340000 8f82bd28 8f404770 00000001 8f82bdf8
- 8f404770 800d463c 07f8d503 8f9e803c 803394c0 00000001 00000001 00000000
- 00000001 800c73e0 8fbf3015 8fbf3010 8f82bdf0 800c6ce4 00000001 8f404770
- 00000041 8f404770 8f82bed0 800c7434 00000000 8f82bd88 00000001 800c9424
- ...
- [ 3.330000] Call Trace:
- [ 3.330000] [<800ba5ec>] kmem_cache_alloc+0x40/0x148
- [ 3.330000] [<800d44bc>] __d_alloc+0x30/0x194
- [ 3.330000] [<800d463c>] d_alloc+0x1c/0x84
- [ 3.330000] [<800c73e0>] lookup_dcache+0xb4/0xe8
- [ 3.330000] [<800c7434>] __lookup_hash+0x20/0x50
- [ 3.330000] [<800c9588>] lookup_slow+0x50/0xcc
- [ 3.330000] [<800c9f24>] path_lookupat+0x128/0x74c
- [ 3.330000] [<800ca8e4>] filename_lookup.isra.44+0x34/0xa0
- [ 3.330000] [<800cc90c>] user_path_at_empty+0x64/0xa4
- [ 3.330000] [<800cc960>] user_path_at+0x14/0x20
- [ 3.330000] [<800c2778>] vfs_fstatat+0x64/0xd0
- [ 3.330000] [<800c2c38>] SyS_newstat+0x18/0x3c
- [ 3.330000] [<80007d88>] handle_sys+0x128/0x14c
- [ 3.330000]
- [ 3.330000]
- Code: 00671821 8c660000 00463021 <8ccb0004> 8cd00000 16000005 02202021 0c02e859 02402821
- [ 3.750000] ---[ end trace 7f88710810faaf13 ]---
- [ 3.760000] Unhandled kernel unaligned access[#2]:
- [ 3.760000] CPU: 0 PID: 1 Comm: preinit Tainted: G D 3.18.27 #4
- [ 3.760000] task: 8f838000 ti: 8f82a000 task.ti: 8f82a000
- [ 3.760000] $ 0 : 00000000 00000001 811f0400 000fee82
- [ 3.760000] $ 4 : 8f802e80 0111a000 8f820a00 80339a30
- [ 3.760000] $ 8 : 80339a30 00000001 0000000c 80375c00
- [ 3.760000] $12 : 00000001 0000000b 8fb2c000 31383031
- [ 3.760000] $16 : 8f838000 8f9c2000 00000000 8f9c2038
- [ 3.760000] $20 : 8f82bd28 ffffff69 8f9c2000 00000001
- [ 3.760000] $24 : 00000000 00000001
- [ 3.760000] $28 : 8f82a000 8f82ba70 00030000 8002a1c8
- [ 3.760000] Hi : 00000000
- [ 3.760000] Lo : 00000000
- [ 3.760000] epc : 800b9974 kmem_cache_free+0xc4/0x198
- [ 3.760000] Tainted: G D
- [ 3.760000] ra : 8002a1c8 do_exit+0x230/0x830
- [ 3.760000] Status: 11009c03 KERNEL EXL IE
- [ 3.760000] Cause : 00800010
- [ 3.760000] BadVA : 000fee86
- [ 3.760000] PrId : 0001992f (MIPS 1004Kc)
- [ 3.760000] Modules linked in:
- [ 3.760000] Process preinit (pid: 1, threadinfo=8f82a000, task=8f838000, tls=00000000)
- [ 3.760000] Stack : 8f838000 8f9c2000 00000000 8f9c2038 8f82bd28 8002a1c8 803a7fe8 00000002
- 803a5fb8 80340000 803a0000 8005b370 00000000 00000001 802d9858 8f82bac4
- 8f82bbd0 80380000 802d7a5c 0000000b 8f82bd28 ffffff69 8f9c2000 7f8ff708
- 00030000 800162f0 00030000 802d7a5c 00000001 ffffffff 00000002 0000000b
- 802d8c0c ce94386c 8f838000 8f82bbd0 8f9a3000 8001c784 00000001 00000000
- ...
- [ 3.760000] Call Trace:
- [ 3.760000] [<800b9974>] kmem_cache_free+0xc4/0x198
- [ 3.760000] [<8002a1c8>] do_exit+0x230/0x830
- [ 3.760000] [<800162f0>] default_cu2_call+0x0/0x44
- [ 3.760000]
- [ 3.760000]
- Code: 00a72821 8ca50000 00651821 <8c6d0004> 8c650008 1445002c 00000000 8c850014 8c690000
- [ 4.090000] ---[ end trace 7f88710810faaf14 ]---
- [ 4.100000] Fixing recursive fault but reboot is needed!
- [ 5.730000] ralink_soc_eth 1e100000.ethernet eth0: port 3 link up
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement