Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- State: SCANNING -> ASSOCIATING
- wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
- WEXT: Operstate: linkmode=-1, operstate=5
- wpa_driver_wext_associate
- wpa_driver_wext_set_psk
- Setting authentication timeout: 10 sec 0 usec
- EAPOL: External notification - EAP success=0
- EAPOL: External notification - EAP fail=0
- EAPOL: External notification - portControl=Auto
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- Wireless event: cmd=0x8b06 len=12
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- Wireless event: cmd=0x8b1a len=16
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- Wireless event: cmd=0x8b04 len=16
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- Wireless event: cmd=0x8b1a len=26
- Authentication with 00:0f:b5:66:a1:16 timed out.
- Added BSSID 00:0f:b5:66:a1:16 into blacklist
- No keys have been configured - skip key clearing
- State: ASSOCIATING -> DISCONNECTED
- wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
- WEXT: Operstate: linkmode=-1, operstate=5
- EAPOL: External notification - portEnabled=0
- EAPOL: External notification - portValid=0
- EAPOL: External notification - EAP success=0
- Setting scan request: 0 sec 0 usec
- State: DISCONNECTED -> SCANNING
- Starting AP scan (broadcast SSID)
- Scan requested (ret=0) - scan timeout 30 seconds
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- Wireless event: cmd=0x8b19 len=16
- Received 1358 bytes of scan results (3 BSSes)
- New scan results available
- WPS: attr type=0x104a len=1
- WPS: attr type=0x1044 len=1
- WPS: attr type=0x1057 len=1
- WPS: attr type=0x1047 len=16
- WPS: attr type=0x103c len=1
- WPS: attr type=0x104a len=1
- WPS: attr type=0x1044 len=1
- WPS: attr type=0x1057 len=1
- WPS: attr type=0x1047 len=16
- WPS: attr type=0x103c len=1
- Selecting BSS from priority group 1
- Try to find WPA-enabled AP
- 0: 00:0f:b5:66:a1:16 ssid='Flumazenil' wpa_ie_len=22 rsn_ie_len=0 caps=0x11
- selected based on WPA IE
- selected WPA AP 00:0f:b5:66:a1:16 ssid='Flumazenil'
- Trying to associate with 00:0f:b5:66:a1:16 (SSID='Flumazenil' freq=2412 MHz)
- Cancelling scan request
- WPA: clearing own WPA/RSN IE
- Automatic auth_alg selection: 0x1
- Overriding auth_alg selection: 0x1
- WPA: using IEEE 802.11i/D3.0
- WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1
- WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
- WPA: clearing AP RSN IE
- WPA: using GTK TKIP
- WPA: using PTK TKIP
- WPA: using KEY_MGMT WPA-PSK
- WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
- No keys have been configured - skip key clearing
- wpa_driver_wext_set_drop_unencrypted
- State: SCANNING -> ASSOCIATING
- wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
- WEXT: Operstate: linkmode=-1, operstate=5
- wpa_driver_wext_associate
- wpa_driver_wext_set_psk
- Setting authentication timeout: 10 sec 0 usec
- EAPOL: External notification - EAP success=0
- EAPOL: External notification - EAP fail=0
- EAPOL: External notification - portControl=Auto
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- Wireless event: cmd=0x8b06 len=12
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- Wireless event: cmd=0x8b1a len=16
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- Wireless event: cmd=0x8b04 len=16
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- Wireless event: cmd=0x8b1a len=26
- Authentication with 00:0f:b5:66:a1:16 timed out.
- BSSID 00:0f:b5:66:a1:16 blacklist count incremented to 2
- No keys have been configured - skip key clearing
- State: ASSOCIATING -> DISCONNECTED
- wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
- WEXT: Operstate: linkmode=-1, operstate=5
- EAPOL: External notification - portEnabled=0
- EAPOL: External notification - portValid=0
- EAPOL: External notification - EAP success=0
- Setting scan request: 0 sec 0 usec
- State: DISCONNECTED -> SCANNING
- Starting AP scan (broadcast SSID)
- Scan requested (ret=0) - scan timeout 30 seconds
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- Wireless event: cmd=0x8b19 len=16
- Received 1358 bytes of scan results (3 BSSes)
- New scan results available
- WPS: attr type=0x104a len=1
- WPS: attr type=0x1044 len=1
- WPS: attr type=0x1057 len=1
- WPS: attr type=0x1047 len=16
- WPS: attr type=0x103c len=1
- WPS: attr type=0x104a len=1
- WPS: attr type=0x1044 len=1
- WPS: attr type=0x1057 len=1
- WPS: attr type=0x1047 len=16
- WPS: attr type=0x103c len=1
- Selecting BSS from priority group 1
- Try to find WPA-enabled AP
- 0: 00:0f:b5:66:a1:16 ssid='Flumazenil' wpa_ie_len=22 rsn_ie_len=0 caps=0x11
- skip - blacklisted
- 1: 00:1c:4a:02:c6:04 ssid='FRITZ!Box Fon WLAN 7140 Annex A' wpa_ie_len=24 rsn_ie_len=20 caps=0x11
- skip - SSID mismatch
- 2: 00:1f:9f:d6:1d:53 ssid='mutti' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
- skip - SSID mismatch
- Try to find non-WPA AP
- 0: 00:0f:b5:66:a1:16 ssid='Flumazenil' wpa_ie_len=22 rsn_ie_len=0 caps=0x11
- skip - blacklisted
- 1: 00:1c:4a:02:c6:04 ssid='FRITZ!Box Fon WLAN 7140 Annex A' wpa_ie_len=24 rsn_ie_len=20 caps=0x11
- skip - SSID mismatch
- 2: 00:1f:9f:d6:1d:53 ssid='mutti' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
- skip - SSID mismatch
- No APs found - clear blacklist and try again
- Removed BSSID 00:0f:b5:66:a1:16 from blacklist (clear)
- Selecting BSS from priority group 1
- Try to find WPA-enabled AP
- 0: 00:0f:b5:66:a1:16 ssid='Flumazenil' wpa_ie_len=22 rsn_ie_len=0 caps=0x11
- selected based on WPA IE
- selected WPA AP 00:0f:b5:66:a1:16 ssid='Flumazenil'
- Trying to associate with 00:0f:b5:66:a1:16 (SSID='Flumazenil' freq=2412 MHz)
- Cancelling scan request
- WPA: clearing own WPA/RSN IE
- Automatic auth_alg selection: 0x1
- Overriding auth_alg selection: 0x1
- WPA: using IEEE 802.11i/D3.0
- WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1
- WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
- WPA: clearing AP RSN IE
- WPA: using GTK TKIP
- WPA: using PTK TKIP
- WPA: using KEY_MGMT WPA-PSK
- WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
- No keys have been configured - skip key clearing
- wpa_driver_wext_set_drop_unencrypted
- State: SCANNING -> ASSOCIATING
- wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
- WEXT: Operstate: linkmode=-1, operstate=5
- wpa_driver_wext_associate
- wpa_driver_wext_set_psk
- Setting authentication timeout: 10 sec 0 usec
- EAPOL: External notification - EAP success=0
- EAPOL: External notification - EAP fail=0
- EAPOL: External notification - portControl=Auto
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- Wireless event: cmd=0x8b06 len=12
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- Wireless event: cmd=0x8b1a len=16
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- Wireless event: cmd=0x8b04 len=16
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
- Wireless event: cmd=0x8b1a len=26
- ^CCTRL-EVENT-TERMINATING - signal 2 received
- Removing interface wlan0
- No keys have been configured - skip key clearing
- State: ASSOCIATING -> DISCONNECTED
- wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
- WEXT: Operstate: linkmode=-1, operstate=5
- EAPOL: External notification - portEnabled=0
- EAPOL: External notification - portValid=0
- EAPOL: External notification - EAP success=0
- wpa_driver_wext_set_wpa
- wpa_driver_wext_set_drop_unencrypted
- wpa_driver_wext_set_countermeasures
- No keys have been configured - skip key clearing
- Cancelling scan request
- Cancelling authentication timeout
- WEXT: Operstate: linkmode=0, operstate=6
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement