API tools faq
paste
Guest User

ac100 ubuntu 12.10 dmesg

a guest
Nov 6th, 2013
179
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 26.43 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.1.10-6-ac100 (buildd@meissa) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #9-Ubuntu SMP Wed Oct 3 16:27:06 UTC 2012
  4. [ 0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] Machine: Toshiba AC100 / Dynabook AZ
  7. [ 0.000000] Tegra reserved memory:
  8. [ 0.000000] LP0: 00000000 - 00000000
  9. [ 0.000000] Bootloader framebuffer: 00000000 - 00000000
  10. [ 0.000000] Framebuffer: 1c000000 - 1c7fffff
  11. [ 0.000000] 2nd Framebuffer: 1c800000 - 1d7fffff
  12. [ 0.000000] Carveout: 1d800000 - 1fffffff
  13. [ 0.000000] Vpr: 00000000 - 00000000
  14. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  15. [ 0.000000] On node 0 totalpages: 114688
  16. [ 0.000000] free_area_init_node: node 0, pgdat c075b240, node_mem_map c07f4000
  17. [ 0.000000] Normal zone: 1024 pages used for memmap
  18. [ 0.000000] Normal zone: 0 pages reserved
  19. [ 0.000000] Normal zone: 113664 pages, LIFO batch:31
  20. [ 0.000000] Tegra SKU: 8 Rev: A02 CPU Process: 1 Core Process: 1 Speedo ID: 0
  21. [ 0.000000] Tegra Revision: A02 SKU: 0x8 CPU Process: 1 Core Process: 1
  22. [ 0.000000] Failed to set parent pll_c_out1 for sclk (violates clock limit 240000000)
  23. [ 0.000000] Unable to set parent pll_c_out1 of clock sclk: -22
  24. [ 0.000000] L310 cache controller enabled
  25. [ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e080001, Cache size: 1048576 B
  26. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0bf8000 s11136 r8192 d13440 u32768
  27. [ 0.000000] pcpu-alloc: s11136 r8192 d13440 u32768 alloc=8*4096
  28. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  29. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113664
  30. [ 0.000000] Kernel command line: mem=512M@0 tegrapart=recovery:300:a00:800,boot:d00:1000:800,mbr:1d00:200:800 console=tty0 root=/dev/mmcblk0p7
  31. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  32. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  33. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  34. [ 0.000000] allocated 2097152 bytes of page_cgroup
  35. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  36. [ 0.000000] Memory: 448MB = 448MB total
  37. [ 0.000000] Memory: 443980k/443980k available, 80308k reserved, 0K highmem
  38. [ 0.000000] Virtual kernel memory layout:
  39. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  40. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  41. [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  42. [ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
  43. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  44. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  45. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  46. [ 0.000000] .text : 0xc0008000 - 0xc06ab1cc (6797 kB)
  47. [ 0.000000] .init : 0xc06ac000 - 0xc06feb80 ( 331 kB)
  48. [ 0.000000] .data : 0xc0700000 - 0xc075e99c ( 379 kB)
  49. [ 0.000000] .bss : 0xc075e9c0 - 0xc07f3988 ( 596 kB)
  50. [ 0.000000] Hierarchical RCU implementation.
  51. [ 0.000000] NR_IRQS:480
  52. [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  53. [ 0.000000] Console: colour dummy device 80x30
  54. [ 0.000000] console [tty0] enabled
  55. [ 0.009295] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)
  56. [ 0.066807] pid_max: default: 32768 minimum: 301
  57. [ 0.070057] Security Framework initialized
  58. [ 0.073222] AppArmor: AppArmor initialized
  59. [ 0.076854] Mount-cache hash table entries: 512
  60. [ 0.080926] Initializing cgroup subsys cpuacct
  61. [ 0.084378] Initializing cgroup subsys memory
  62. [ 0.087893] Initializing cgroup subsys devices
  63. [ 0.091378] Initializing cgroup subsys freezer
  64. [ 0.095011] CPU: Testing write buffer coherency: ok
  65. [ 0.099767] ftrace: allocating 19312 entries in 57 pages
  66. [ 0.121443] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  67. [ 0.125255] CPU1: Booted secondary processor
  68. [ 0.127261] Brought up 2 CPUs
  69. [ 0.132704] SMP: Total of 2 processors activated (3974.75 BogoMIPS).
  70. [ 0.135635] devtmpfs: initialized
  71. [ 0.141055] print_constraints: dummy:
  72. [ 0.144723] NET: Registered protocol family 16
  73. [ 0.147200] host1x bus init
  74. [ 0.152772] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  75. [ 0.301112] The pingroup DTA was configured to <UNKNOWN> instead of RSVD1
  76. [ 0.307023] The pingroup DTB was configured to <UNKNOWN> instead of RSVD1
  77. [ 0.312946] The pingroup DTC was configured to <UNKNOWN> instead of RSVD1
  78. [ 0.318853] The pingroup DTD was configured to <UNKNOWN> instead of RSVD1
  79. [ 0.324770] The pingroup DTE was configured to <UNKNOWN> instead of RSVD1
  80. [ 0.331008] The pingroup SPDI was configured to <UNKNOWN> instead of RSVD2
  81. [ 0.337005] The pingroup SPDO was configured to <UNKNOWN> instead of RSVD2
  82. [ 0.343027] The pingroup SPIF was configured to <UNKNOWN> instead of RSVD4
  83. [ 0.348949] The pingroup UAC was configured to <UNKNOWN> instead of RSVD4
  84. [ 0.355104] serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a XScale
  85. [ 0.444202] tegra_init_suspend: Suspend mode LP0 requested, no lp0_vec provided by bootlader -- disabling LP0
  86. [ 0.451369] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  87. [ 0.457812] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  88. [ 0.462760] hw-breakpoint: maximum watchpoint size is 4 bytes.
  89. [ 0.465804] tegra_arb_init: initialized
  90. [ 0.469717] tegra_iovmm_register: added iovmm-gart
  91. [ 0.482199] bio: create slab <bio-0> at 0
  92. [ 0.485621] SCSI subsystem initialized
  93. [ 0.490428] usbcore: registered new interface driver usbfs
  94. [ 0.494858] usbcore: registered new interface driver hub
  95. [ 0.499092] usbcore: registered new device driver usb
  96. [ 0.503825] tegra-otg tegra-otg: otg transceiver registered
  97. [ 0.511148] tps6586x 4-0034: VERSIONCRC is 05
  98. [ 0.517943] tps6586x-regulator tps6586x-regulator.0: Probing reulator 0
  99. [ 0.525479] print_constraints: REG-SM_0: 725 <--> 1300 mV at 1200 mV normal standby
  100. [ 0.531453] tps6586x-regulator tps6586x-regulator.1: Probing reulator 1
  101. [ 0.538960] print_constraints: REG-SM_1: 725 <--> 1125 mV at 1000 mV normal standby
  102. [ 0.545201] tps6586x-regulator tps6586x-regulator.2: Probing reulator 2
  103. [ 0.551512] print_constraints: REG-SM_2: 3700 mV normal standby
  104. [ 0.557365] tps6586x-regulator tps6586x-regulator.3: Probing reulator 3
  105. [ 0.563446] print_constraints: REG-LDO_0: 3300 mV normal standby
  106. [ 0.569295] tps6586x-regulator tps6586x-regulator.4: Probing reulator 4
  107. [ 0.575696] print_constraints: REG-LDO_1: 1100 mV normal standby
  108. [ 0.581550] tps6586x-regulator tps6586x-regulator.5: Probing reulator 5
  109. [ 0.588993] print_constraints: REG-LDO_2: 725 <--> 1275 mV at 1200 mV normal standby
  110. [ 0.594853] tps6586x-regulator tps6586x-regulator.6: Probing reulator 6
  111. [ 0.601254] print_constraints: REG-LDO_3: 3300 mV normal standby
  112. [ 0.607113] tps6586x-regulator tps6586x-regulator.7: Probing reulator 7
  113. [ 0.613774] print_constraints: REG-LDO_4: 1800 mV normal standby
  114. [ 0.619625] tps6586x-regulator tps6586x-regulator.8: Probing reulator 8
  115. [ 0.625455] print_constraints: REG-LDO_5: 2850 mV normal standby
  116. [ 0.631315] tps6586x-regulator tps6586x-regulator.9: Probing reulator 9
  117. [ 0.637387] print_constraints: REG-LDO_6: 1800 mV normal standby
  118. [ 0.643445] tps6586x-regulator tps6586x-regulator.10: Probing reulator 10
  119. [ 0.649424] print_constraints: REG-LDO_7: 3300 mV normal standby
  120. [ 0.655456] tps6586x-regulator tps6586x-regulator.11: Probing reulator 11
  121. [ 0.661438] print_constraints: REG-LDO_8: 1800 mV normal standby
  122. [ 0.667473] tps6586x-regulator tps6586x-regulator.12: Probing reulator 12
  123. [ 0.673302] print_constraints: REG-LDO_9: 2850 mV normal standby
  124. [ 0.676539] NetLabel: Initializing
  125. [ 0.679961] NetLabel: domain hash size = 128
  126. [ 0.683988] NetLabel: protocols = UNLABELED CIPSOv4
  127. [ 0.688673] NetLabel: unlabeled traffic allowed by default
  128. [ 0.692242] Switching to clocksource timer_us
  129. [ 0.697468] Switched to NOHz mode on CPU #0
  130. [ 0.700688] Switched to NOHz mode on CPU #1
  131. [ 0.711494] FS-Cache: Loaded
  132. [ 0.713769] CacheFiles: Loaded
  133. [ 0.717655] AppArmor: AppArmor Filesystem Enabled
  134. [ 0.723109] nvmap_page_pool_init: nvmap uc page pool size=13874 pages
  135. [ 0.742055] nvmap_page_pool_init: nvmap pool = uc, highmem=0, pool_size=13874,totalram=110995, freeram=96459, totalhigh=0, freehigh=0
  136. [ 0.788068] nvmap_page_pool_init: nvmap wc page pool size=13874 pages
  137. [ 0.807015] nvmap_page_pool_init: nvmap pool = wc, highmem=0, pool_size=13874,totalram=110995, freeram=82540, totalhigh=0, freehigh=0
  138. [ 0.853088] nvmap_page_pool_init: nvmap iwb page pool size=13874 pages
  139. [ 0.872115] nvmap_page_pool_init: nvmap pool = iwb, highmem=0, pool_size=13874,totalram=110995, freeram=68590, totalhigh=0, freehigh=0
  140. [ 0.919288] tegra-nvmap tegra-nvmap: created carveout iram (255KiB)
  141. [ 0.926868] tegra-nvmap tegra-nvmap: created carveout generic-0 (40960KiB)
  142. [ 0.939692] NET: Registered protocol family 2
  143. [ 0.946007] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  144. [ 0.953042] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  145. [ 0.958986] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  146. [ 0.964838] TCP: Hash tables configured (established 16384 bind 16384)
  147. [ 0.967009] TCP reno registered
  148. [ 0.971933] UDP hash table entries: 256 (order: 1, 8192 bytes)
  149. [ 0.977322] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  150. [ 0.980999] NET: Registered protocol family 1
  151. [ 0.983981] PCI: CLS 0 bytes, default 32
  152. [ 0.987583] host1x host1x: initialized
  153. [ 0.991676] PMU: registered new PMU device of type 0
  154. [ 0.996986] audit: initializing netlink socket (disabled)
  155. [ 1.000859] type=2000 audit(16.043:1): initialized
  156. [ 1.071962] VFS: Disk quotas dquot_6.5.2
  157. [ 1.077513] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  158. [ 1.081243] msgmni has been set to 867
  159. [ 1.086143] io scheduler noop registered (default)
  160. [ 1.089465] io scheduler deadline registered
  161. [ 1.092381] io scheduler cfq registered
  162. [ 1.095916] mpe mpe: initialized
  163. [ 1.099246] gr3d gr3d: initialized
  164. [ 1.102525] gr2d gr2d: initialized
  165. [ 1.104997] isp isp: initialized
  166. [ 1.107240] vi vi: initialized
  167. [ 1.313627] tegradc tegradc.0: probed
  168. [ 1.354528] Console: switching to colour frame buffer device 128x37
  169. [ 1.394365] tegradc tegradc.0: probed
  170. [ 1.411988] nvhdcp: using "always on" policy.
  171. [ 1.415344] tegradc tegradc.1: probed
  172. [ 1.418659] tegradc tegradc.1: probed
  173. [ 1.422354] Initialized tegra uart driver
  174. [ 1.425283] brd: module loaded
  175. [ 1.430661] loop: module loaded
  176. [ 1.444395] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  177. [ 1.456319] tegra USB phy - inst[1] platform info:
  178. [ 1.465951] port_otg: no
  179. [ 1.475493] has_hostpc: no
  180. [ 1.486920] phy_interface: USB_PHY_INTF_ULPI_LINK
  181. [ 1.497713] op_mode: TEGRA_USB_OPMODE_HOST
  182. [ 1.506807] vbus_gpio: -1
  183. [ 1.515830] vbus_reg: NULL
  184. [ 1.524986] hot_plug: disabled
  185. [ 1.534428] remote_wakeup: disabled
  186. [ 1.568524] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
  187. [ 1.582252] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
  188. [ 1.617209] tegra-ehci tegra-ehci.1: irq 53, io mem 0xc5004000
  189. [ 1.647279] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00
  190. [ 1.660180] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  191. [ 1.673567] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  192. [ 1.685057] usb usb1: Product: Tegra EHCI Host Controller
  193. [ 1.697275] usb usb1: Manufacturer: Linux 3.1.10-6-ac100 ehci_hcd
  194. [ 1.707925] usb usb1: SerialNumber: tegra-ehci.1
  195. [ 1.718054] hub 1-0:1.0: USB hub found
  196. [ 1.727839] hub 1-0:1.0: 1 port detected
  197. [ 1.738207] Failed lp0 wake enable for irq=53
  198. [ 1.748976] tegra USB phy - inst[2] platform info:
  199. [ 1.757482] port_otg: no
  200. [ 1.766075] has_hostpc: no
  201. [ 1.776333] phy_interface: USB_PHY_INTF_UTMI
  202. [ 1.786510] op_mode: TEGRA_USB_OPMODE_HOST
  203. [ 1.795261] vbus_gpio: -1
  204. [ 1.804015] vbus_reg: NULL
  205. [ 1.812874] hot_plug: enabled
  206. [ 1.822086] remote_wakeup: disabled
  207. [ 1.834889] create_regulator: REG-LDO_3: Failed to create debugfs directory
  208. [ 1.849583] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
  209. [ 1.863523] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2
  210. [ 1.907296] tegra-ehci tegra-ehci.2: irq 129, io mem 0xc5008000
  211. [ 1.937295] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
  212. [ 1.948261] utmi_phy_irq: usb device plugged-in
  213. [ 1.961437] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  214. [ 1.975155] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  215. [ 1.987077] usb usb2: Product: Tegra EHCI Host Controller
  216. [ 1.999741] usb usb2: Manufacturer: Linux 3.1.10-6-ac100 ehci_hcd
  217. [ 2.010996] usb usb2: SerialNumber: tegra-ehci.2
  218. [ 2.021714] hub 2-0:1.0: USB hub found
  219. [ 2.032147] hub 2-0:1.0: 1 port detected
  220. [ 2.043346] Failed lp0 wake enable for irq=129
  221. [ 2.054999] Initializing USB Mass Storage driver...
  222. [ 2.060786] usb 1-1: new high speed USB device number 2 using tegra-ehci
  223. [ 2.081986] usbcore: registered new interface driver usb-storage
  224. [ 2.093676] USB Mass Storage support registered.
  225. [ 2.106607] usbcore: registered new interface driver libusual
  226. [ 2.122043] Nvidia Tegra High-Speed USB SOC Device Controller driver (Apr 30, 2012)
  227. [ 2.134299] tegra USB phy - inst[0] platform info:
  228. [ 2.144284] port_otg: yes
  229. [ 2.154080] has_hostpc: no
  230. [ 2.165356] phy_interface: USB_PHY_INTF_UTMI
  231. [ 2.176719] op_mode: TEGRA_USB_OPMODE_DEVICE
  232. [ 2.186506] vbus_pmu_irq: 0
  233. [ 2.196135] vbus_gpio: -1
  234. [ 2.206051] charging: disabled
  235. [ 2.216401] remote_wakeup: disabled
  236. [ 2.230261] create_regulator: REG-LDO_3: Failed to create debugfs directory
  237. [ 2.252499] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled
  238. [ 2.265948] mousedev: PS/2 mouse device common for all mice
  239. [ 2.282342] tps6586x-rtc tps6586x-rtc.0: rtc core: registered tps6586x-rtc as rtc0
  240. [ 2.295822] trpc_sema_init: registered misc dev 10:56
  241. [ 2.309388] trpc_node_register: Adding 'local' to node list
  242. [ 2.325127] tegra_avp_probe: allocated carveout memory at 1ff00000 for AVP kernel
  243. [ 2.339616] trpc_node_register: Adding 'avp-remote' to node list
  244. [ 2.353336] usb 1-1: device descriptor read/64, error -71
  245. [ 2.367293] tegra_avp_probe: message area 111ea000/111ea110
  246. [ 2.379975] cpuidle: using governor ladder
  247. [ 2.391906] cpuidle: using governor menu
  248. [ 2.405836] sdhci: Secure Digital Host Controller Interface driver
  249. [ 2.418072] sdhci: Copyright(c) Pierre Ossman
  250. [ 2.431510] sdhci-pltfm: SDHCI platform and OF driver helper
  251. [ 2.445409] mmc0: Invalid maximum block size, assuming 512 bytes
  252. [ 2.457554] Registered led device: mmc0::
  253. [ 2.463982] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
  254. [ 2.477608] Failed gpio lp0 enable for irq=365, error=-22
  255. [ 2.494592] sdhci-tegra sdhci-tegra.0: SD card wake-up event registrationfailed with eroor: -22
  256. [ 2.513495] sdhci-tegra sdhci-tegra.0: vddio_sdmmc regulator not found: -19.Assuming vddio_sdmmc is not required.
  257. [ 2.533109] sdhci-tegra sdhci-tegra.0: vddio_sd_slot regulator not found: -19. Assuming vddio_sd_slot is not required.
  258. [ 2.538222] mmc1: Invalid maximum block size, assuming 512 bytes
  259. [ 2.541264] mmc1: no vmmc regulator found
  260. [ 2.544382] Registered led device: mmc1::
  261. [ 2.550826] mmc1: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA
  262. [ 2.554201] Registered led device: wifi-led
  263. [ 2.576641] nvec nvec.2: Spurious IRQ
  264. [ 2.599905] nvec nvec.2: ec firmware version 01.20.00 / f9
  265. [ 2.613963] nvec nvec.2: added 6 NVEC subdevices
  266. [ 2.629425] input: nvec keyboard as /devices/virtual/input/input0
  267. [ 2.646750] usb 1-1: device descriptor read/64, error -71
  268. [ 2.675651] mmc0: new high speed MMC card at address 0001
  269. [ 2.689298] mmcblk0: mmc0:0001 MMC08G 7.45 GiB
  270. [ 2.704199] mmcblk0boot0: mmc0:0001 MMC08G partition 1 2.00 MiB
  271. [ 2.719161] mmcblk0boot1: mmc0:0001 MMC08G partition 2 2.00 MiB
  272. [ 2.736599] tegrapart_partition: state->bdev->bd_disk->disk_name = mmcblk0
  273. [ 2.754332] parse_tegrapart: tegrapart=recovery:300:a00:800,boot:d00:1000:800,mbr:1d00:200:800
  274. [ 2.770143] parse_tegrapart: part #1 [recover] start=3072 size=10240
  275. [ 2.785837] parse_tegrapart: part #2 [boot] start=13312 size=16384
  276. [ 2.799458] parse_tegrapart: mbr start=29696
  277. [ 2.812965] tegra_msdos_parse: mbr_offset=29696
  278. [ 2.827141] tegra_msdos_parse: no msdos magic
  279. [ 2.851478] mmcblk0: p1 p2 p1 p2 p3 p4 p5 p6 p7
  280. [ 2.866564] nvtegrapart: hidden_parts =
  281. [ 2.880237] nvtegrapart: #1 [PT ] start=2048 size=1024
  282. [ 2.893764] nvtegrapart: #2 [EBT ] start=3072 size=4096
  283. [ 2.907181] nvtegrapart: #3 [SOS ] start=7168 size=10240
  284. [ 2.920539] nvtegrapart: #4 [LNX ] start=17408 size=16384
  285. [ 2.933663] nvtegrapart: #5 [MBR ] start=33792 size=2048
  286. [ 2.946848] nvtegrapart: #6 [APP ] start=35840 size=614400
  287. [ 2.960216] nvtegrapart: #7 [CAC ] start=650240 size=819200
  288. [ 2.973327] nvtegrapart: #8 [MSC ] start=1469440 size=4096
  289. [ 2.986281] nvtegrapart: #9 [EM1 ] start=1473536 size=1024
  290. [ 2.999508] nvtegrapart: #10 [UDA ] start=1474560 size=2529280
  291. [ 3.012450] nvtegrapart: #11 [EM2 ] start=4003840 size=1024
  292. [ 3.026141] nvtegrapart: #12 [UDB ] start=4004864 size=11506688
  293. [ 3.034593]
  294. [ 3.047052] mmcblk0boot1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
  295. [ 3.052046] mmcblk0boot1: p2 size 4096 extends beyond EOD, truncated
  296. [ 3.072492] mmcblk0boot1: p3 start 7168 is beyond EOD, truncated
  297. [ 3.085224] mmcblk0boot1: p4 start 17408 is beyond EOD, truncated
  298. [ 3.097959] mmcblk0boot1: p5 start 33792 is beyond EOD, truncated
  299. [ 3.110461] mmcblk0boot1: p6 start 35840 is beyond EOD, truncated
  300. [ 3.122782] mmcblk0boot1: p7 start 650240 is beyond EOD, truncated
  301. [ 3.135254] mmcblk0boot1: p8 start 1469440 is beyond EOD, truncated
  302. [ 3.147708] mmcblk0boot1: p9 start 1473536 is beyond EOD, truncated
  303. [ 3.160031] mmcblk0boot1: p10 start 1474560 is beyond EOD, truncated
  304. [ 3.172346] mmcblk0boot1: p11 start 4003840 is beyond EOD, truncated
  305. [ 3.184471] mmcblk0boot1: p12 start 4004864 is beyond EOD, truncated
  306. [ 3.197803] usb 1-1: new high speed USB device number 3 using tegra-ehci
  307. [ 3.212072] tegrapart_partition: state->bdev->bd_disk->disk_name = mmcblk0boot0
  308. [ 3.226612] parse_tegrapart: tegrapart=recovery:300:a00:800,boot:d00:1000:800,mbr:1d00:200:800
  309. [ 3.238943] parse_tegrapart: part #1 [recover] start=3072 size=10240
  310. [ 3.250939] parse_tegrapart: part #2 [boot] start=13312 size=16384
  311. [ 3.260812] parse_tegrapart: mbr start=29696
  312. [ 3.270867] tegra_msdos_parse: mbr_offset=29696
  313. [ 3.280762] tegra_msdos_parse: no msdos magic
  314. [ 3.292440] mmcblk0boot0: p1 p2 unknown partition table
  315. [ 3.426749] usb 1-1: device descriptor read/64, error -71
  316. [ 3.643526] Registered led device: nvec-led
  317. [ 3.650026] input: NVEC sleep button as /devices/virtual/input/input1
  318. [ 3.663134] input: NVEC power button as /devices/virtual/input/input2
  319. [ 3.675031] usb 1-1: device descriptor read/64, error -71
  320. [ 3.688680] input: NVEC lid switch button as /devices/virtual/input/input3
  321. [ 3.699080] oprofile: using arm/armv7-ca9
  322. [ 3.709936] Netfilter messages via NETLINK v0.30.
  323. [ 3.722175] nf_conntrack version 0.5.0 (6937 buckets, 27748 max)
  324. [ 3.734219] ctnetlink v0.93: registering with nfnetlink.
  325. [ 3.747292] ip_tables: (C) 2000-2006 Netfilter Core Team
  326. [ 3.757186] TCP cubic registered
  327. [ 3.768351] NET: Registered protocol family 10
  328. [ 3.781494] NET: Registered protocol family 17
  329. [ 3.794627] rfkill_gpio rfkill_gpio: wifi_rfkill device registered.
  330. [ 3.806230] Registering the dns_resolver key type
  331. [ 3.815820] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
  332. [ 3.831989] ThumbEE CPU extension supported.
  333. [ 3.843618] Registering SWP/SWPB emulation handler
  334. [ 3.861262] Disabling clocks left on by bootloader:
  335. [ 3.870584] audio_2x
  336. [ 3.880040] dsi2-fixed
  337. [ 3.889563] dsi1-fixed
  338. [ 3.898166] vi
  339. [ 3.908098] usb 1-1: new high speed USB device number 4 using tegra-ehci
  340. [ 3.917823] i2c3-fast
  341. [ 3.926852] nor
  342. [ 3.927837] vde
  343. [ 3.928908] bsev
  344. [ 3.929978] bsea
  345. [ 3.931499] fuse_burn
  346. [ 3.932663] clk_d
  347. [ 3.934281] pll_p_out2
  348. [ 3.935887] pll_c_out1
  349. [ 3.937982] CPU rate: 1000 MHz
  350. [ 3.943548] tegra_fuse_program_init: no vdd_fuse. fuse write disabled
  351. [ 4.006782] registered taskstats version 1
  352. [ 4.020772] input: gpio-keys as /devices/platform/gpio-keys/input/input4
  353. [ 4.036685] tps6586x-rtc tps6586x-rtc.0: setting system clock to 2013-11-06 13:19:23 UTC (1383743963)
  354. [ 4.053873] EXT3-fs (mmcblk0p7): error: couldn't mount because of unsupported optional features (240)
  355. [ 4.101393] EXT2-fs (mmcblk0p7): error: couldn't mount because of unsupported optional features (244)
  356. [ 4.324222] EXT4-fs (mmcblk0p7): recovery complete
  357. [ 4.329120] usb 1-1: device not accepting address 4, error -71
  358. [ 4.355024] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
  359. [ 4.367503] VFS: Mounted root (ext4 filesystem) on device 179:7.
  360. [ 4.377835] devtmpfs: mounted
  361. [ 4.387992] Freeing init memory: 328K
  362. [ 4.448100] usb 1-1: new high speed USB device number 5 using tegra-ehci
  363. [ 4.794998] init: plymouth main process (59) killed by ABRT signal
  364. [ 4.809052] init: ureadahead main process (58) terminated with status 5
  365. [ 4.877210] usb 1-1: device not accepting address 5, error -71
  366. [ 4.891527] hub 1-0:1.0: unable to enumerate USB device on port 1
  367. [ 4.920207] elantech: assuming hardware version 3 (with firmware version 0x150500)
  368. [ 4.968901] elantech: Synaptics capabilities query result 0x69, 0x17, 0x09.
  369. [ 5.018123] usb 2-1: new high speed USB device number 2 using tegra-ehci
  370. [ 5.178713] usb 2-1: New USB device found, idVendor=0424, idProduct=2513
  371. [ 5.193810] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  372. [ 5.205447] hub 2-1:1.0: USB hub found
  373. [ 5.217572] hub 2-1:1.0: 3 ports detected
  374. [ 5.232825] input: ETPS/2 Elantech Touchpad as /devices/serio0/input/input5
  375. [ 5.528555] usb 2-1.2: new high speed USB device number 3 using tegra-ehci
  376. [ 5.694387] usb 2-1.2: New USB device found, idVendor=0bda, idProduct=58f2
  377. [ 5.709422] usb 2-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
  378. [ 5.721202] usb 2-1.2: Product: USB Camera
  379. [ 5.733355] usb 2-1.2: Manufacturer: Y9A8J6F1
  380. [ 5.745955] usb 2-1.2: SerialNumber: 200901010001
  381. [ 6.904805] init: plymouth-log main process (151) terminated with status 1
  382. [ 6.955249] udevd[170]: starting version 175
  383. [ 7.231491] init: plymouth-upstart-bridge main process (206) terminated with status 1
  384. [ 7.368548] Bluetooth: Core ver 2.16
  385. [ 7.382548] NET: Registered protocol family 31
  386. [ 7.388038] Bluetooth: HCI device and connection manager initialized
  387. [ 7.391978] Bluetooth: HCI socket layer initialized
  388. [ 7.396074] Bluetooth: L2CAP socket layer initialized
  389. [ 7.426735] Bluetooth: SCO socket layer initialized
  390. [ 7.509948] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  391. [ 7.514226] Bluetooth: BNEP filters: protocol multicast
  392. [ 7.604928] Bluetooth: RFCOMM TTY layer initialized
  393. [ 7.609495] Bluetooth: RFCOMM socket layer initialized
  394. [ 7.612312] Bluetooth: RFCOMM ver 1.11
  395. [ 7.678719] Linux video capture interface: v2.00
  396. [ 7.727226] uvcvideo: Found UVC 1.00 device USB Camera (0bda:58f2)
  397. [ 7.793429] type=1400 audit(1383743967.235:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=282 comm="apparmor_parser"
  398. [ 7.835595] type=1400 audit(1383743967.285:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=282 comm="apparmor_parser"
  399. [ 7.852654] input: USB Camera as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.2/2-1.2:1.0/input/input6
  400. [ 7.874494] usbcore: registered new interface driver uvcvideo
  401. [ 7.877704] USB Video Class driver (1.1.1)
  402. [ 8.197470] type=1400 audit(1383743967.645:4): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=391 comm="apparmor_parser"
  403. [ 8.438274] init: failsafe main process (399) killed by TERM signal
  404. [ 8.648040] asoc: alc5632-hifi <-> tegra20-i2s.0 mapping ok
  405. [ 8.657850] input: tegra-alc5632 Headset Jack as /devices/platform/tegra-alc5632.0/sound/card0/input7
  406. [ 8.671238] type=1400 audit(1383743968.115:5): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=463 comm="apparmor_parser"
  407. [ 8.688607] type=1400 audit(1383743968.135:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=463 comm="apparmor_parser"
  408. [ 8.705346] type=1400 audit(1383743968.155:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=462 comm="apparmor_parser"
  409. [ 8.720048] type=1400 audit(1383743968.175:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=463 comm="apparmor_parser"
  410. [ 8.737284] type=1400 audit(1383743968.175:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=462 comm="apparmor_parser"
  411. [ 8.779837] type=1400 audit(1383743968.225:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=467 comm="apparmor_parser"
  412. [ 8.794549] type=1400 audit(1383743968.245:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=467 comm="apparmor_parser"
  413. [ 9.532707] zram: module is from the staging directory, the quality is unknown, you have been warned.
  414. [ 9.562811] zram: Creating 2 devices ...
  415. [ 10.610173] Adding 111076k swap on /dev/zram0. Priority:5 extents:1 across:111076k SS
  416. [ 10.649405] Adding 111076k swap on /dev/zram1. Priority:5 extents:1 across:111076k SS
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!