API tools faq
paste
tiltshiftfocus

XM-Kernel #188

tiltshiftfocus
Mar 2nd, 2013
170
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 53.00 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing cgroup subsys cpu
  2. [ 0.000000] Linux version 2.6.39.4-g0abcb8a-dirty (toastcfh@toastcfh-XPS-L702x) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Sun May 27 14:51:51 EDT 2012
  3. [ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387f
  4. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000] Machine: endeavoru
  6. [ 0.000000] Ignoring unrecognised tag 0x41000801
  7. [ 0.000000] Ignoring unrecognised tag 0x41000801
  8. [ 0.000000] parse_tag_als_calibration: als_kadc = 0x6da5148d
  9. [ 0.000000] parse_tag_ps_calibration: ps_kparam1 = 0x50530306, ps_kparam2 = 0xffff0a0f
  10. [ 0.000000] Ignoring unrecognised tag 0x4e540000
  11. [ 0.000000] Ignoring unrecognised tag 0x54410120
  12. [ 0.000000] Ignoring unrecognised tag 0x54410100
  13. [ 0.000000] Ignoring unrecognised tag 0x54410110
  14. [ 0.000000] Parsting partition tag[emmc] (sizeof(struct msm_ptbl_entry) / sizeof(__u32)) 7
  15. [ 0.000000] [emmc] header->size 94
  16. [ 0.000000] [emmc] count 13
  17. [ 0.000000] Partition (from atag) recovery -- Offset:5 Size:800
  18. [ 0.000000] Partition (from atag) boot -- Offset:4 Size:800
  19. [ 0.000000] Partition (from atag) system -- Offset:c Size:50000
  20. [ 0.000000] Partition (from atag) cache -- Offset:d Size:14000
  21. [ 0.000000] Partition (from atag) misc -- Offset:11 Size:200
  22. [ 0.000000] Partition (from atag) wlan -- Offset:1 Size:600
  23. [ 0.000000] Partition (from atag) WDM -- Offset:2 Size:200
  24. [ 0.000000] Partition (from atag) pdata -- Offset:14 Size:200
  25. [ 0.000000] Partition (from atag) radiocab -- Offset:3 Size:600
  26. [ 0.000000] Partition (from atag) internalsd -- Offset:e Size:650000
  27. [ 0.000000] Partition (from atag) userdata -- Offset:f Size:89400
  28. [ 0.000000] Partition (from atag) devlog -- Offset:13 Size:1600
  29. [ 0.000000] Partition (from atag) extra -- Offset:10 Size:200
  30. [ 0.000000] Ignoring unrecognised tag 0x43294329
  31. [ 0.000000] Ignoring unrecognised tag 0x41000801
  32. [ 0.000000] Ignoring unrecognised tag 0x41000801
  33. [ 0.000000] kmemleak: Kernel memory leak detector disabled
  34. [ 0.000000] Found tegra_fbmem: 00384b40@bc0ab000
  35. [ 0.000000] Tegra reserved memory:
  36. [ 0.000000] LP0: bc0a8000 - bc0a9fff
  37. [ 0.000000] Bootloader framebuffer: bc0ab000 - bc42ffff
  38. [ 0.000000] Framebuffer: bec00000 - beffffff
  39. [ 0.000000] 2nd Framebuffer: bf000000 - bf7fffff
  40. [ 0.000000] Carveout: 00000000 - 00000000
  41. [ 0.000000] Vpr: 00000000 - 00000000
  42. [ 0.000000] Nvdumper: bf7ff000 - bf800000
  43. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  44. [ 0.000000] nv - MISC_CLK_ENB: 10000005
  45. [ 0.000000] nv - XBAR_CTRL: 10004
  46. [ 0.000000] [hTC info] project phase: <Latest HW phase> (id=128)
  47. [ 0.000000] Tegra3: CPU Speedo ID 4, Soc Speedo ID 1
  48. [ 0.000000] Tegra Revision: A03 SKU: 0x81 CPU Process: 1 Core Process: 0
  49. [ 0.000000] Lowering cpu_lp maximum rate from 620000000 to 500000000
  50. [ 0.000000] Lowering sbus maximum rate from 334000000 to 267000000
  51. [ 0.000000] Lowering vi maximum rate from 425000000 to 409000000
  52. [ 0.000000] Lowering vde maximum rate from 520000000 to 416000000
  53. [ 0.000000] Lowering mpe maximum rate from 520000000 to 416000000
  54. [ 0.000000] Lowering 2d maximum rate from 520000000 to 416000000
  55. [ 0.000000] Lowering epp maximum rate from 520000000 to 416000000
  56. [ 0.000000] Lowering 3d maximum rate from 520000000 to 416000000
  57. [ 0.000000] Lowering 3d2 maximum rate from 520000000 to 416000000
  58. [ 0.000000] Lowering se maximum rate from 520000000 to 416000000
  59. [ 0.000000] Lowering cbus maximum rate from 700000000 to 416000000
  60. [ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000
  61. [ 0.000000] Lowering ndflash maximum rate from 240000000 to 200000000
  62. [ 0.000000] Lowering sbc1 maximum rate from 160000000 to 100000000
  63. [ 0.000000] Lowering sbc2 maximum rate from 160000000 to 100000000
  64. [ 0.000000] Lowering sbc3 maximum rate from 160000000 to 100000000
  65. [ 0.000000] Lowering sbc4 maximum rate from 160000000 to 100000000
  66. [ 0.000000] Lowering sbc5 maximum rate from 160000000 to 100000000
  67. [ 0.000000] Lowering sbc6 maximum rate from 160000000 to 100000000
  68. [ 0.000000] Lowering dsia maximum rate from 500000000 to 275000000
  69. [ 0.000000] Lowering dsib maximum rate from 500000000 to 275000000
  70. [ 0.000000] Lowering cpu_g maximum rate from 1700000000 to 1500000000
  71. [ 0.000000] tegra dvfs: VDD_CPU nominal 1200mV, scaling enabled
  72. [ 0.000000] tegra dvfs: VDD_CORE nominal 1200mV, scaling enabled
  73. [ 0.000000] [BOOT_LOG] Entering <machine>_init_power
  74. [ 0.000000] [BOOT_LOG] Entering <machine>_init_cache
  75. [ 0.000000] L310 cache controller enabled
  76. [ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e080001, Cache size: 1048576 B
  77. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1718000 s8416 r8192 d16160 u32768
  78. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254736
  79. [ 0.000000] Kernel command line: tegraid=30.1.3.0.0 mem=1016M@2048M vmalloc=668M video=tegrafb zygote_oneshot=off kmemleak=off androidboot.lb=1 androidboot.carrier=HTC-Asia-SEA-WWE androidboot.wipeddata=0 led=1 androidboot.keycaps=qwerty console=none usbcore.old_scheme_first=1 lp0_vec=8192@0xbc0a8000 nvdumper_reserved=0xbf7ff000 tegra_fbmem=3689280@0xbc0ab000 panel_id=0x944701 tegraboot=sdmmc gpt gpt_sector=61063167 androidboot.mode=recovery debug_uartport=lsport modem_id=0 androidboot.baseband=5.1204.162.29 androidboot.emmc=1 androidboot.sf=1 androidboot.skunum=0 androidboot.cid=HTC__044 androidboot.mid=PJ4610000 androidboot.serialno=SH23KW110608 androidboot.mb_serialno=419G923H12064 androidboot.bootloader=1.36.0000 last_off_event=long_press_key start_on_event=none hw_rst_reason=0x0 sw_rst_reason=0x0 project_phase=A radioflag=0x0 ats=0 hlog.ofs=296 un.ofs=0 HBootTemp=0 androidboot.engid=0x0
  80. [ 0.000000] Found panel_vendor: 944701
  81. [ 0.000000] board_bootloader_setup: 1.36.0000
  82. [ 0.000000] board_bootloader_setup: SHIP BUILD
  83. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  84. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  85. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  86. [ 0.000000] Memory: 1003MB = 1003MB total
  87. [ 0.000000] Memory: 996940k/996940k available, 43444k reserved, 789988K highmem
  88. [ 0.000000] Virtual kernel memory layout:
  89. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  90. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  91. [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  92. [ 0.000000] vmalloc : 0xce800000 - 0xf8000000 ( 664 MB)
  93. [ 0.000000] lowmem : 0xc0000000 - 0xce400000 ( 228 MB)
  94. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  95. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  96. [ 0.000000] .init : 0xc0008000 - 0xc004b000 ( 268 kB)
  97. [ 0.000000] .text : 0xc004b000 - 0xc07531f0 (7201 kB)
  98. [ 0.000000] .data : 0xc0d00000 - 0xc0de4db0 ( 916 kB)
  99. [ 0.000000] Preemptable hierarchical RCU implementation.
  100. [ 0.000000] RCU-based detection of stalled CPUs is disabled.
  101. [ 0.000000] Verbose stalled-CPUs detection is disabled.
  102. [ 0.000000] NR_IRQS:816
  103. [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  104. [ 0.000378] Calibrating delay loop... 1993.93 BogoMIPS (lpj=9969664)
  105. [ 0.060077] pid_max: default: 32768 minimum: 301
  106. [ 0.060519] Mount-cache hash table entries: 512
  107. [ 0.061549] Initializing cgroup subsys debug
  108. [ 0.061560] Initializing cgroup subsys cpuacct
  109. [ 0.061622] Initializing cgroup subsys freezer
  110. [ 0.061691] CPU: Testing write buffer coherency: ok
  111. [ 0.182190] CPU1: Booted secondary processor
  112. [ 0.242156] CPU2: Booted secondary processor
  113. [ 0.302154] CPU3: Booted secondary processor
  114. [ 0.321969] Brought up 4 CPUs
  115. [ 0.321980] SMP: Total of 4 processors activated (7975.73 BogoMIPS).
  116. [ 0.327532] [BOOT_LOG] Entering do_initcalls
  117. [ 0.328474] print_constraints: dummy:
  118. [ 0.328813] NET: Registered protocol family 16
  119. [ 0.330183] host1x bus init
  120. [ 0.330768] [BOOT_LOG] Entering <machine>.init_machine
  121. [ 0.331855] The pingroup LCD_PWR1 was configured to RSVD2 instead of <UNKNOWN>
  122. [ 0.331918] The pingroup LCD_DC1 was configured to RSVD2 instead of <UNKNOWN>
  123. [ 0.332006] The pingroup LCD_D8 was configured to RSVD2 instead of <UNKNOWN>
  124. [ 0.332046] The pingroup LCD_D14 was configured to RSVD2 instead of <UNKNOWN>
  125. [ 0.332060] The pingroup LCD_D15 was configured to RSVD2 instead of <UNKNOWN>
  126. [ 0.332074] The pingroup GMI_AD0 was configured to RSVD2 instead of <UNKNOWN>
  127. [ 0.332088] The pingroup GMI_AD1 was configured to RSVD2 instead of <UNKNOWN>
  128. [ 0.332101] The pingroup GMI_AD2 was configured to RSVD2 instead of <UNKNOWN>
  129. [ 0.332114] The pingroup GMI_AD3 was configured to RSVD2 instead of <UNKNOWN>
  130. [ 0.332128] The pingroup GMI_AD4 was configured to RSVD2 instead of <UNKNOWN>
  131. [ 0.332141] The pingroup GMI_AD5 was configured to RSVD2 instead of <UNKNOWN>
  132. [ 0.332155] The pingroup GMI_AD6 was configured to RSVD2 instead of <UNKNOWN>
  133. [ 0.332168] The pingroup GMI_AD7 was configured to RSVD2 instead of <UNKNOWN>
  134. [ 0.332187] The pingroup GMI_AD9 was configured to RSVD2 instead of <UNKNOWN>
  135. [ 0.332205] The pingroup GMI_AD11 was configured to RSVD2 instead of <UNKNOWN>
  136. [ 0.332219] The pingroup GMI_AD12 was configured to RSVD2 instead of <UNKNOWN>
  137. [ 0.332232] The pingroup GMI_AD13 was configured to RSVD2 instead of <UNKNOWN>
  138. [ 0.332246] The pingroup GMI_AD14 was configured to RSVD2 instead of <UNKNOWN>
  139. [ 0.332265] The pingroup GMI_WR_N was configured to RSVD3 instead of <UNKNOWN>
  140. [ 0.332278] The pingroup GMI_OE_N was configured to RSVD3 instead of <UNKNOWN>
  141. [ 0.332292] The pingroup GMI_DQS was configured to RSVD3 instead of <UNKNOWN>
  142. [ 0.332326] The pingroup GMI_WAIT was configured to RSVD2 instead of <UNKNOWN>
  143. [ 0.332350] The pingroup GMI_CS1_N was configured to RSVD1 instead of <UNKNOWN>
  144. [ 0.332378] The pingroup GMI_ADV_N was configured to RSVD2 instead of <UNKNOWN>
  145. [ 0.332392] The pingroup GMI_CLK was configured to RSVD2 instead of <UNKNOWN>
  146. [ 0.332406] The pingroup GMI_CS4_N was configured to RSVD2 instead of <UNKNOWN>
  147. [ 0.332419] The pingroup GMI_CS2_N was configured to RSVD2 instead of <UNKNOWN>
  148. [ 0.332432] The pingroup GMI_CS3_N was configured to RSVD1 instead of <UNKNOWN>
  149. [ 0.332471] The pingroup LCD_D18 was configured to RSVD2 instead of <UNKNOWN>
  150. [ 0.332494] The pingroup LCD_D21 was configured to RSVD2 instead of <UNKNOWN>
  151. [ 0.332508] The pingroup LCD_D22 was configured to RSVD2 instead of <UNKNOWN>
  152. [ 0.332521] The pingroup LCD_D23 was configured to RSVD2 instead of <UNKNOWN>
  153. [ 0.332646] The pingroup DAP4_DOUT was configured to RSVD2 instead of <UNKNOWN>
  154. [ 0.332660] The pingroup DAP4_SCLK was configured to RSVD2 instead of <UNKNOWN>
  155. [ 0.332713] The pingroup KB_ROW2 was configured to RSVD3 instead of <UNKNOWN>
  156. [ 0.332727] The pingroup KB_ROW3 was configured to RSVD2 instead of <UNKNOWN>
  157. [ 0.332740] The pingroup KB_ROW4 was configured to RSVD3 instead of <UNKNOWN>
  158. [ 0.332806] The pingroup GPIO_PU0 was configured to RSVD1 instead of <UNKNOWN>
  159. [ 0.332819] The pingroup GPIO_PU1 was configured to RSVD2 instead of <UNKNOWN>
  160. [ 0.332833] The pingroup GPIO_PU2 was configured to RSVD2 instead of <UNKNOWN>
  161. [ 0.332846] The pingroup GPIO_PU3 was configured to RSVD1 instead of <UNKNOWN>
  162. [ 0.332912] The pingroup CRT_VSYNC was configured to RSVD3 instead of <UNKNOWN>
  163. [ 0.332925] The pingroup LCD_CS1_N was configured to RSVD2 instead of RSVD1
  164. [ 0.332954] The pingroup CLK1_OUT was configured to RSVD3 instead of <UNKNOWN>
  165. [ 0.332968] The pingroup CLK2_OUT was configured to RSVD3 instead of <UNKNOWN>
  166. [ 0.333027] The pingroup SPI1_MISO was configured to RSVD3 instead of <UNKNOWN>
  167. [ 0.333062] The pingroup SDMMC1_DAT1 was configured to RSVD1 instead of <UNKNOWN>
  168. [ 0.333173] The pingroup GPIO_PBB0 was configured to RSVD2 instead of <UNKNOWN>
  169. [ 0.333223] The pingroup GPIO_PBB7 was configured to RSVD2 instead of <UNKNOWN>
  170. [ 0.333241] The pingroup GPIO_PCC1 was configured to RSVD2 instead of <UNKNOWN>
  171. [ 0.333270] The pingroup CLK2_REQ was configured to RSVD3 instead of <UNKNOWN>
  172. [ 0.333400] The pingroup KB_ROW0 was configured to RSVD3 instead of <UNKNOWN>
  173. [ 0.333413] The pingroup KB_ROW3 was configured to RSVD2 instead of <UNKNOWN>
  174. [ 0.333427] The pingroup KB_ROW4 was configured to RSVD3 instead of <UNKNOWN>
  175. [ 0.333445] The pingroup CLK3_REQ was configured to RSVD3 instead of <UNKNOWN>
  176. [ 0.333464] The pingroup LCD_D19 was configured to RSVD2 instead of <UNKNOWN>
  177. [ 0.334028] Selecting UARTA as the debug console
  178. [ 0.334045] The debug console clock name is uarta_dbg
  179. [ 0.334828] [USBPHY] tegra_usb_phy_init
  180. [ 0.337060] ram_console: got buffer at beb00000, size 100000
  181. [ 0.337173] ram_console: found existing buffer, size 917476, start 793360
  182. [ 3.418217] console [ram-1] enabled
  183. [ 3.418950] enterprise_edp_init: CPU regulator 0 mA
  184. [ 3.419054] Registering gpio keys
  185. [ 3.431981] enterprise_modem_init: enable baseband gpio(s)
  186. [ 3.432473] enterprise_modem_init: gpio config for sim_det#.
  187. [ 3.432698] enterprise_modem_init: gpio config for core dump when radio fatal error.
  188. [ 3.433091] [DISP]enterprise_panel_init(2809) IN
  189. [ 3.433283] [DISP]enterprise_panel_init(2825) panel id 0x00944701
  190. [ 3.448134] [DISP]enterprise_panel_init(3007) OUTinit 533MHz Timing table
  191. [ 3.448734] tegra: validated EMC DFS table
  192. [ 3.448841] [PS][cm3629]psensor_init ps_type = 1
  193. [ 3.448945] [GSNR] g-sensor irq_start...
  194. [ 3.449120] [GSNR] g-sensor irq end...
  195. [ 3.449217] [GYRO] gyro diag_start...
  196. [ 3.449312] [GYRO] gyro diag irq end...
  197. [ 3.449488] [GYRO] mog sleep pin...
  198. [ 3.453146] [mtd] mount /proc/emmc successfully
  199. [ 3.453254] [BOOT_LOG] Leaving <machine>.init_machine
  200. [ 3.454627] tegra_iovmm_register: added iovmm-smmu
  201. [ 3.474375] bio: create slab <bio-0> at 0
  202. [ 3.475781] vgaarb: loaded
  203. [ 3.476023] i2c-core: driver [tps6591x] using legacy suspend method
  204. [ 3.476121] i2c-core: driver [tps6591x] using legacy resume method
  205. [ 3.476365] i2c-core: driver [tps80031] using legacy suspend method
  206. [ 3.476538] i2c-core: driver [tps80031] using legacy resume method
  207. [ 3.477393] SCSI subsystem initialized
  208. [ 3.478984] [USB] otg transceiver registered
  209. [ 3.479163] [USB] <6>[USBOTG] tegra_otg_probe done!
  210. [ 3.479591] usbcore: registered new interface driver usbfs
  211. [ 3.479942] usbcore: registered new interface driver hub
  212. [ 3.480178] usbcore: registered new device driver usb
  213. [ 3.483048] tps80031 4-004a: Jtag version 0x01 and Eeprom version 0x70
  214. [ 3.511969] Wake18 for irq=118
  215. [ 3.512067] Enabling wake18
  216. [ 3.520745] print_constraints: tps80031_VIO: 607 <--> 2100 mV at 1800 mV normal standby
  217. [ 3.527751] print_constraints: tps80031_SMPS1: 607 <--> 2100 mV at 1215 mV normal standby
  218. [ 3.534446] print_constraints: tps80031_SMPS2: 607 <--> 2100 mV at 1202 mV normal standby
  219. [ 3.538256] print_constraints: tps80031_SMPS3: 607 <--> 2100 mV at 1202 mV normal standby
  220. [ 3.542049] print_constraints: tps80031_SMPS4: 1852 <--> 2199 mV at 2817 mV normal standby
  221. [ 3.544889] print_constraints: tps80031_LDO1: 1000 <--> 3300 mV at 1200 mV normal standby
  222. [ 3.545087] set_supply: tps80031_LDO1: supplied by tps80031_VIO
  223. [ 3.549971] print_constraints: tps80031_LDO2: 1000 <--> 1287 mV at 1000 mV normal standby
  224. [ 3.552756] print_constraints: tps80031_LDO3: 1000 <--> 3300 mV at 1300 mV normal standby
  225. [ 3.555626] print_constraints: tps80031_LDO4: 1000 <--> 3300 mV at 3000 mV normal standby
  226. [ 3.558463] print_constraints: tps80031_LDO5: 1000 <--> 3300 mV at 2800 mV normal standby
  227. [ 3.563343] print_constraints: tps80031_LDO6: 1000 <--> 3300 mV at 2800 mV normal standby
  228. [ 3.568241] print_constraints: tps80031_LDO7: 1000 <--> 3300 mV at 1200 mV normal standby
  229. [ 3.568434] set_supply: tps80031_LDO7: supplied by tps80031_VIO
  230. [ 3.573308] print_constraints: tps80031_LDOLN: 1000 <--> 3300 mV at 1000 mV normal standby
  231. [ 3.573504] set_supply: tps80031_LDOLN: supplied by tps80031_SMPS3
  232. [ 3.577214] print_constraints: tps80031_LDOUSB: 1000 <--> 3300 mV at 3300 mV normal standby
  233. [ 3.579100] print_constraints: tps80031_VANA: 1000 <--> 3300 mV at 2100 mV normal standby
  234. [ 3.581057] print_constraints: tps80031_VBUS: normal standby
  235. [ 3.594131] Advanced Linux Sound Architecture Driver Version 1.0.24.
  236. [ 3.597309] print_constraints: gpio-switch-led_3v3_en: 3300 mV normal standby
  237. [ 3.597684] print_constraints: gpio-switch-vib_3v_en: 3000 mV normal standby
  238. [ 3.598070] print_constraints: gpio-switch-srio_1v8_en: 1800 mV normal standby
  239. [ 3.598380] print_constraints: gpio-switch-aud_a1v8_en: 1800 mV normal standby
  240. [ 3.598739] print_constraints: gpio-switch-aud_3v3_en: 3300 mV normal standby
  241. [ 3.599023] print_constraints: gpio-switch-lcmio_1v8_en: 1800 mV normal standby
  242. [ 3.599411] print_constraints: gpio-switch-lcm_3v3_en: 3300 mV normal standby
  243. [ 3.599646] gpio-switch-regulator gpio-switch-regulator: Unable to request gpio 194
  244. [ 3.599746] gpio-switch-regulator gpio-switch-regulator: Unable to register regulator gpio-switch-mhl_3v3_en
  245. [ 3.599925] gpio-switch-regulator gpio-switch-regulator: Unable to request gpio 36
  246. [ 3.600101] gpio-switch-regulator gpio-switch-regulator: Unable to register regulator gpio-switch-mhl_1v2_en
  247. [ 3.600279] gpio-switch-regulator gpio-switch-regulator: Unable to request gpio 103
  248. [ 3.600455] gpio-switch-regulator gpio-switch-regulator: Unable to register regulator gpio-switch-cam_vcm_2v85_en
  249. [ 3.600561] gpio-switch-regulator gpio-switch-regulator: Unable to request gpio 46
  250. [ 3.600739] gpio-switch-regulator gpio-switch-regulator: Unable to register regulator gpio-switch-cam2_d1v2_en
  251. [ 3.600922] gpio-switch-regulator gpio-switch-regulator: Unable to request gpio 45
  252. [ 3.601099] gpio-switch-regulator gpio-switch-regulator: Unable to register regulator gpio-switch-cam_d1v2_en
  253. [ 3.601277] gpio-switch-regulator gpio-switch-regulator: Unable to request gpio 220
  254. [ 3.601374] gpio-switch-regulator gpio-switch-regulator: Unable to register regulator gpio-switch-camio_1v8_en
  255. [ 3.601551] gpio-switch-regulator gpio-switch-regulator: Unable to request gpio 35
  256. [ 3.601728] gpio-switch-regulator gpio-switch-regulator: Unable to register regulator gpio-switch-cam_a2v85_en
  257. [ 3.602062] print_constraints: gpio-switch-sdmmc_2v85_en: 2850 mV normal standby
  258. [ 3.602358] tegra: started io power detection dynamic control
  259. [ 3.602533] tegra: NO_IO_POWER setting 0x10
  260. [ 3.602630] Switching to clocksource timer_us
  261. [ 3.604109] tegra-nvmap tegra-nvmap: created carveout iram (255KiB)
  262. [ 3.606058] [BATT][tps65200] init chg_int interrupt.
  263. [ 3.607069] [BATT][tps65200] [TPS65200]: Driver registration done
  264. [ 3.608831] [PMU_ADC]tps80032_adc_probe:GPADC eanbled, then check calibration with map 0x7f
  265. [ 3.611905] NET: Registered protocol family 2
  266. [ 3.612114] Switched to NOHz mode on CPU #0
  267. [ 3.612200] Switched to NOHz mode on CPU #3
  268. [ 3.612208] Switched to NOHz mode on CPU #2
  269. [ 3.612236] Switched to NOHz mode on CPU #1
  270. [ 3.612880] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
  271. [ 3.613610] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  272. [ 3.614224] TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
  273. [ 3.614810] TCP: Hash tables configured (established 32768 bind 32768)
  274. [ 3.614907] TCP reno registered
  275. [ 3.615004] UDP hash table entries: 128 (order: 0, 4096 bytes)
  276. [ 3.615264] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
  277. [ 3.615921] NET: Registered protocol family 1
  278. [ 3.616777] RPC: Registered udp transport module.
  279. [ 3.616877] RPC: Registered tcp transport module.
  280. [ 3.617053] RPC: Registered tcp NFSv4.1 backchannel transport module.
  281. [ 3.617153] PCI: CLS 0 bytes, default 32
  282. [ 3.618181] Unpacking initramfs...
  283. [ 3.794559] Freeing initrd memory: 2536K
  284. [ 3.794881] PMU: registered new PMU device of type 0
  285. [ 3.795900] [CPUHP]Tegra auto-hotplug initialized: disabled
  286. [ 3.796009] cpu-tegra: init EDP limit: 1350 MHz
  287. [ 3.797339] [FLT][PROBE] flashlight driver probe +++
  288. [ 3.797582] config_enterprise_flashlight_gpios: start...config_enterprise_flashlight_gpios: end...
  289. [ 3.798237] Registered led device: flashlight
  290. [ 3.798423] [FLT]flashlight_probe: led_count = 0
  291. [ 3.798599] [FLT][PROBE] flashlight driver probe ---, led_count = 1
  292. [ 3.798768] baseband_xmm_power_init - host_dbg_flag=0x0
  293. [ 3.798943] [XMM_v10]baseband_xmm_power_init 0x1121
  294. [ 3.799037] [XMM_v10]baseband_xmm_power_init - platfrom_set_flight_mode_onoff - on
  295. [ 3.799209] baseband_xmm_power_init:VP adding pm qos request
  296. [ 3.799351] [XMM_v10]baseband_xmm_power_driver_probe 0316 hr_sleep and jiffe - CPU Freq.
  297. [ 3.799527] [XMM_v10]enum_delay_ms=1000
  298. [ 3.799621] [XMM_v10]htcpcbid=128
  299. [ 3.799807] baseband_xmm_power_driver_probe request UART
  300. [ 3.799905] baseband_xmm_power_driver_probe pull UART o d
  301. [ 3.800080] baseband_xmm_power_driver_probe config_gpio_for_power_off
  302. [ 3.800176] [XMM_v10]config_gpio_for_power_off for power consumation 4st
  303. [ 3.800351] [XMM_v10]modem_off_for_usb_config 1219_01
  304. [ 3.800449] [XMM_v10]modem_off_for_uart_config uart_pin_pull_low=1
  305. [ 3.800623] [XMM_v10]gpio_o_l_uart ,name=IMC_UART_TX gpio=79
  306. [ 3.800860] [XMM_v10]gpio_o_l_uart ,name=IMC_UART_RTS gpio=87
  307. [ 3.801156] [XMM_v10]gpio_o_l_uart ,name=IMC_UART_RX gpio=8
  308. [ 3.801370] [XMM_v10]gpio_o_l_uart ,name=IMC_UART_CTS gpio=9
  309. [ 3.801853] baseband_xmm_power_driver_probe: request enable irq wake SIM det to wakeup source
  310. [ 3.801970] baseband_xmm_power_work_func - work->sate=1
  311. [ 3.802142] BBXMM_WORK_INIT
  312. [ 3.802236] Go to next state 6
  313. [ 3.802337] baseband_xmm_power_work_func - work->sate=6
  314. [ 3.802516] baseband_xmm_power_work_func - work->sate=7
  315. [ 3.802622] Wake23 for irq=293
  316. [ 3.802796] Enabling wake23
  317. [ 3.802890] gpio bank wake found: wake23 for irq=66
  318. [ 3.802982] Enabling wake23
  319. [ 3.803171] baseband_xmm_power_driver_probe }
  320. [ 3.803401] delay work version htc_simhotswap_probe
  321. [ 3.803734] htc_simhotswap_probe(): finish SIM init status=0
  322. [ 3.803921] Wake23 for irq=293
  323. [ 3.807175] [PMU_VSYS]tps80032_vsys_alarm_register_notifier:set_irq_wake failed irq 738
  324. [ 3.807384] [BATT] htc_battery_probe(): finish at 3804551003 (1970-01-01 00:00:21.617549003 UTC)
  325. [ 3.807645] nvdumper: nvdumper_reserved:0xbf7ff000
  326. [ 3.807755] nvdumper: nvdumper_ptr:0xce808000
  327. [ 3.807854] nvdumper: reboot_params:0xce80c000
  328. [ 3.808029] nvdumper: ret:0
  329. [ 3.808123] nvdumper: dirty:1
  330. [ 3.808217] nvdumper: last reboot was dirty
  331. [ 3.825552] highmem bounce pool size: 64 pages
  332. [ 3.825921] ashmem: initialized
  333. [ 3.828255] fuse init (API version 7.16)
  334. [ 3.828816] Registering char device tf_driver (122:0)
  335. [ 3.830496] io scheduler noop registered (default)
  336. [ 3.835788] tegra_grhost tegra_grhost: initialized
  337. [ 3.836516] tegradc tegradc.0: DSI: Failed to get chip info
  338. [ 3.836619] tegradc tegradc.0: DSI: HS clock rate is 417000
  339. [ 3.838733] [DISP]bridge_reset(328) IN
  340. [ 3.848876] [DISP]bridge_reset(354) Workaround for first panel init sequence
  341. [ 3.849144] [DISP]bridge_reset(392) is_power_on:1
  342. [ 3.849239] [DISP]bridge_reset(393) OUT
  343. [ 3.853506] [DISP]ic_reset(402) IN
  344. [ 3.853693] [DISP]ic_reset(406) Workaround for first panel init sequence
  345. [ 3.853953] [DISP]ic_reset(417) OUT
  346. [ 4.010835] tegradc tegradc.0: probed
  347. [ 4.011409] tegradc tegradc.0: probed
  348. [ 4.020791] Wake4 for irq=335
  349. [ 4.021763] nvhdcp: using "always on" policy.
  350. [ 4.022304] tegradc tegradc.1: probed
  351. [ 4.022804] tegradc tegradc.1: probed
  352. [ 4.023278] [DISP]mhl_sii_power(221) IN
  353. [ 4.038397] [DISP]mhl_sii_power(257) OUT
  354. [ 4.038498] [DISP]MhlTx: SiiMhlTxInitialize
  355. [ 4.044172] [DISP]Drv: SiiMhlTxChipInitialize: 9244
  356. [ 4.045571] [DISP]SiI 9234
  357. [ 4.045666] [DISP]Drv: WriteInitialRegisterValues
  358. [ 4.064301] [DISP]Drv: MHL 1.0 Compliant Clock
  359. [ 4.092803] [DISP]Drv: InitCBusRegs
  360. [ 4.107180] [DISP]Drv: Switch To D3: pinAllowD3 = 1
  361. [ 4.164934] Wake8 for irq=247
  362. [ 4.165662] input: rcp_events as /devices/virtual/input/input0
  363. [ 4.165868] input_set_abs_params: mix_x 941, max_x 31664, min_y 417, max_y 32053
  364. [ 4.166236] input: tv-touchscreen as /devices/virtual/input/input1
  365. [ 4.166414] [DISP]sii9234_probe: Probe success!
  366. [ 4.166585] i2c-core: driver [sii9234] using legacy resume method
  367. [ 4.167105] [SER] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  368. [ 4.283008] tegra-i2c tegra-i2c.3: I2c error status 0x00000008
  369. [ 4.283108] tegra-i2c tegra-i2c.3: no acknowledge from address 0x50
  370. [ 4.283283] tegra-i2c tegra-i2c.3: Packet status 0x00010009
  371. [ 4.284433] tegradc tegradc.1: error reading edid
  372. [ 4.773023] serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a Tegra
  373. [ 4.773125] port->cons=0xC0D5A838 port->cons->flags=0x11
  374. [ 4.933163] tegra_uart.1: ttyHS1 at I/O 0x0 (irq = 69) is a unknown
  375. [ 4.933262] port->cons=0x0
  376. [ 5.092854] Registered UART port ttyHS1
  377. [ 5.093143] tegra_uart.2: ttyHS2 at I/O 0x0 (irq = 78) is a unknown
  378. [ 5.093242] port->cons=0x0
  379. [ 5.093687] [PWR_STORY][CPUHP]CPUs total active time:0,0,0,5090855
  380. [ 5.252852] Registered UART port ttyHS2
  381. [ 5.253034] tegra_uart.3: ttyHS3 at I/O 0x0 (irq = 122) is a unknown
  382. [ 5.253211] port->cons=0x0
  383. [ 5.412852] Registered UART port ttyHS3
  384. [ 5.413111] tegra_uart.4: ttyHS4 at I/O 0x0 (irq = 123) is a unknown
  385. [ 5.413207] port->cons=0x0
  386. [ 5.572851] Registered UART port ttyHS4
  387. [ 5.573163] Initialized tegra uart driver
  388. [ 5.577463] loop: module loaded
  389. [ 5.577746] i2c-core: driver [apds9802als] using legacy suspend method
  390. [ 5.577921] i2c-core: driver [apds9802als] using legacy resume method
  391. [ 5.578087] nct1008 4-004c: success in enabling rail vdd_nct1008
  392. [ 5.582369] [TMS] local temp = 54
  393. [ 5.583418] [TMS] remote temp = 66.25
  394. [ 5.584933] nct1008 4-004c: nct1008_probe: initialized
  395. [ 5.585118] [TMS] nct1008_enable
  396. [ 5.587246] [TMS] throttle end
  397. [ 5.588217] [TMS] throttle start
  398. [ 5.589825] [TMS] throttle end
  399. [ 5.592383] [TMS] current_temp=2.25, gpio_pcc2=1
  400. [ 5.593346] [TMS] set hi_limit=20, lo_limit=-64
  401. [ 5.593627] i2c-core: driver [nct1008] using legacy suspend method
  402. [ 5.593885] i2c-core: driver [nct1008] using legacy resume method
  403. [ 5.594187] i2c-core: driver [mpu3050] using legacy suspend method
  404. [ 5.594365] i2c-core: driver [mpu3050] using legacy resume method
  405. [ 5.594468] mpu_init
  406. [ 5.594763] [VIB][PROBE] vibrator_probe +++
  407. [ 5.595257] [VIB][PROBE] vibrator_probe ---
  408. [ 5.595486] [CABLE] tegra_usb_dpdn_switch: Set USB path
  409. [ 5.595664] [DISP]sii9234_change_usb_owner(0)
  410. [ 5.596011] Wake9 for irq=370
  411. [ 5.596170] [CABLE] usb_id_detect_init: ID=146, IRQ=0x172
  412. [ 5.596343] [CABLE] cable_detect_probe: Done
  413. [ 5.597172] PPP generic driver version 2.4.2
  414. [ 5.597483] PPP Deflate Compression module registered
  415. [ 5.597660] PPP BSD Compression module registered
  416. [ 5.599633] PPP MPPE Compression module registered
  417. [ 5.599813] NET: Registered protocol family 24
  418. [ 5.600598] tun: Universal TUN/TAP device driver, 1.6
  419. [ 5.600778] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  420. [ 5.601249] usbcore: registered new interface driver cdc_ether
  421. [ 5.601530] usbcore: registered new interface driver smsc95xx
  422. [ 5.601710] usbcore: registered new interface driver cdc_subset
  423. [ 5.601895] cdc_ncm: 23-Apr-2011
  424. [ 5.602070] usbcore: registered new interface driver cdc_ncm
  425. [ 5.602176] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  426. [ 5.602692] usbcore: registered new interface driver cdc_wdm
  427. [ 5.602790] Initializing USB Mass Storage driver...
  428. [ 5.603134] usbcore: registered new interface driver usb-storage
  429. [ 5.603234] USB Mass Storage support registered.
  430. [ 5.603505] usbcore: registered new interface driver libusual
  431. [ 5.603822] usbcore: registered new interface driver usbserial
  432. [ 5.603999] usbserial: USB Serial Driver core
  433. [ 5.604167] USB Serial support registered for GSM modem (1-port)
  434. [ 5.604435] usbcore: registered new interface driver option
  435. [ 5.604530] option: v0.7.2:USB Driver for GSM modems
  436. [ 5.604774] USB Serial support registered for pl2303
  437. [ 5.604964] usbcore: registered new interface driver pl2303
  438. [ 5.605137] pl2303: Prolific PL2303 USB to serial adaptor driver
  439. [ 5.605233] [USBUDC] NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
  440. [ 5.605610] [USBPHY] tegra_usb_phy_open 0(0:utmi, 1:ulpi, 2:null, 3:hsic)
  441. [ 5.605952] [USBPHY] tegra_usb_phy_open regulator_get(NULL, "avdd_usb")
  442. [ 5.607552] [USBPHY] tegra_usb_phy_power_on 0(0:utmi, 1:ulpi, 2:null, 3:hsic)
  443. [ 5.607736] [USBPHY] hssync_start_delay = 0x9
  444. [ 5.607837] [USB] strength setup = 0x36, slew = 0x0
  445. [ 5.611596] Wake19 for irq=52
  446. [ 5.611689] Enabling wake19
  447. [ 5.611783] Wake19 for irq=52
  448. [ 5.611875] Enabling wake19
  449. [ 5.612047] Wake19 for irq=52
  450. [ 5.612387] [USBUDC] fsl_udc_clk_suspend is_dpd:0
  451. [ 5.612486] [USBPHY] tegra_usb_phy_power_off 0(0:utmi, 1:ulpi, 2:null, 3:hsic)
  452. [ 5.635724] [TMS] receive irq
  453. [ 5.635836] [TMS] nct1008_work_func start
  454. [ 5.636018] [TMS] nct1008_disable
  455. [ 5.637090] [TMS] throttle start
  456. [ 5.638650] [TMS] throttle end
  457. [ 5.641135] [TMS] current_temp=68.25, gpio_pcc2=0
  458. [ 5.642078] [TMS] set hi_limit=70, lo_limit=57
  459. [ 5.673253] utmi_phy_clk_disable: timeout waiting for phy to stabilize
  460. [ 5.673600] [USB] [USBOTG] SUSPEND --> PERIPHERAL
  461. [ 5.673699] [USBUDC] tegra_usb_set_vbus_state on
  462. [ 5.673878] [USBUDC] fsl_udc_clk_resume is_dpd:0
  463. [ 5.674010] [USBPHY] tegra_usb_phy_power_on 0(0:utmi, 1:ulpi, 2:null, 3:hsic)
  464. [ 5.674189] [USBPHY] hssync_start_delay = 0x9
  465. [ 5.674288] [USB] strength setup = 0x36, slew = 0x0
  466. [ 5.677912] [USBUDC] online = on udc->flags 2
  467. [ 5.678181] [USBUDC] usb_do_work 0 2
  468. [ 5.678927] [USB] android_init_functions rndis init
  469. [ 5.679452] [USB] android_init_functions accessory init
  470. [ 5.679877] [USB] android_init_functions mtp init
  471. [ 5.680084] [USB] android_init_functions ptp init
  472. [ 5.681604] android_usb gadget: Mass Storage Function, version: 2009/09/11
  473. [ 5.681706] android_usb gadget: Number of LUNs=1
  474. [ 5.681914] lun0: LUN: removable file: (no medium)
  475. [ 5.682032] [USB] android_init_functions mass_storage init
  476. [ 5.682581] [USB] android_init_functions adb init
  477. [ 5.682798] [USB] android_init_functions cdc_ethernet init
  478. [ 5.683133] [USB] android_init_functions serial init
  479. [ 5.683600] [USB] android_init_functions projector init
  480. [ 5.683782] Gadget Android: controller 'fsl-tegra-udc' not recognized
  481. [ 5.683996] android_usb gadget: android_usb ready
  482. [ 5.684170] [USBUDC] fsl-tegra-udc: bind to driver android_usb
  483. [ 5.684282] [USBUDC] usb_do_work 0 1
  484. [ 5.684380] [USBUDC] tegra udc: IDLE -> ONLINE vbus:1
  485. [ 5.684643] Wake7 for irq=390
  486. [ 5.684817] Wake27 for irq=368
  487. [ 5.684959] Wake11 for irq=403
  488. [ 5.685424] input: gpio-keys as /devices/platform/gpio-keys.0/input/input2
  489. [ 5.685662] [KEY] Power key released
  490. [ 5.685840] [KEY] GPIO key status, key code = 116, state = 0
  491. [ 5.685939] [KEY] GPIO key status, key code = 115, state = 0
  492. [ 5.686112] [KEY] GPIO key status, key code = 114, state = 0
  493. [ 5.695155] [TMS] nct1008_enable
  494. [ 5.695597] [TMS] nct1008_work_func end, status = 16
  495. [ 5.702855] [USBUDC] Charger :USB [portsc:4100]
  496. [ 5.782845] [KEY] gpio_keys_probe end.
  497. [ 5.783380] usbcore: registered new interface driver xpad
  498. [ 5.783602] [TP] synaptics_ts_probe: enter
  499. [ 5.884155] [TP] syn_pdt_scan: memory allocate success. ptr: cd4de420
  500. [ 5.884421] [TP] synaptics: 4 function supported
  501. [ 5.884894] Query: A2, Command: 0000, Control: 58, Data: 0, INTR: 1, Funtion: 34
  502. [ 5.885347] Query: AB, Command: 00A0, Control: 5C, Data: 13, INTR: 2, Funtion: 1
  503. [ 5.885800] Query: C5, Command: 00A1, Control: 62, Data: 15, INTR: 4, Funtion: 11
  504. [ 5.886278] Query: 1C3, Command: 01C2, Control: 10B, Data: 100, INTR: 8, Funtion: 54
  505. [ 5.886779] [TP] syn_get_version: package_id: 3202
  506. [ 5.887077] [TP] syn_get_version: panel_version: 3330
  507. [ 5.887453] [TP] syn_get_version: packrat_number: 1100755
  508. [ 5.887774] [TP] syn_get_version: config version: 59313230
  509. [ 5.913600] [TP] synaptics: 2 function supported
  510. [ 5.913972] Query: 7F, Command: 0000, Control: 4B, Data: 0, INTR: 1, Funtion: 34
  511. [ 5.914425] Query: 88, Command: 007D, Control: 4F, Data: 13, INTR: 2, Funtion: 1
  512. [ 5.915350] [TP] A3:1 A5:1, A7:1
  513. [ 5.953005] [TP] Disable flash programming success! F01_data: 81
  514. [ 5.954092] [TP] synaptics: 4 function supported
  515. [ 5.954646] Query: A2, Command: 0000, Control: 58, Data: 0, INTR: 1, Funtion: 34
  516. [ 5.955021] Query: AB, Command: 00A0, Control: 5C, Data: 13, INTR: 2, Funtion: 1
  517. [ 5.955472] Query: C5, Command: 00A1, Control: 62, Data: 15, INTR: 4, Funtion: 11
  518. [ 5.956025] Query: 1C3, Command: 01C2, Control: 10B, Data: 100, INTR: 8, Funtion: 54
  519. [ 5.956124] [TP] synaptics_ts_probe: pdata->version = 3330, pdata->packrat_number = 0
  520. [ 5.956305] [TP] CRC = AA2F9390
  521. [ 5.983601] [TP] synaptics: 2 function supported
  522. [ 5.984049] Query: 7F, Command: 0000, Control: 4B, Data: 0, INTR: 1, Funtion: 34
  523. [ 5.984497] Query: 88, Command: 007D, Control: 4F, Data: 13, INTR: 2, Funtion: 1
  524. [ 6.002863] [USBUDC] send connect type 1
  525. [ 6.003039] [USBUDC] wake_lock
  526. [ 6.003144] [BATT] cable USB at 6000312003 (1970-01-01 00:00:23.813310003 UTC)
  527. [ 6.682854] [USB] android_enable_function: mass_storage enabled
  528. [ 6.683036] [USB] android_bind_enabled_functions bind name: mass_storage
  529. [ 6.683223] [USB] android_usb_init_work: ret: 0
  530. [ 6.686236] [USBUDC] SUSPEND packet
  531. [ 6.792979] [USBUDC] RESET packet
  532. [ 6.953163] [USBUDC] RESET packet
  533. [ 7.013006] [TP] Disable flash programming success! F01_data: 81
  534. [ 7.013102] [TP] syn_config_update success
  535. [ 7.014273] [TP] synaptics: 4 function supported
  536. [ 7.014747] Query: A2, Command: 0000, Control: 58, Data: 0, INTR: 1, Funtion: 34
  537. [ 7.015200] Query: AB, Command: 00A0, Control: 5C, Data: 13, INTR: 2, Funtion: 1
  538. [ 7.015574] Query: C5, Command: 00A1, Control: 62, Data: 15, INTR: 4, Funtion: 11
  539. [ 7.016050] Query: 1C3, Command: 01C2, Control: 10B, Data: 100, INTR: 8, Funtion: 54
  540. [ 7.016480] [TP] Loads customer register
  541. [ 7.016728] [TP] syn_get_information: finger_support: 10
  542. [ 7.017127] [TP] syn_get_information: max_x: 1100, max_y: 1909
  543. [ 7.018714] [TP] syn_get_information: X: 12, Y: 22
  544. [ 7.019058] [TP] syn_get_information: ts->relaxation: 255
  545. [ 7.019398] [TP] input_set_abs_params: mix_x 0, max_x 1100, min_y 0, max_y 1770
  546. [ 7.019801] input: synaptics-rmi-touchscreen as /devices/virtual/input/input3
  547. [ 7.020156] Wake1 for irq=393
  548. [ 7.020566] [TP] synaptics_ts_probe: interrupt enable: 3f
  549. [ 7.020906] [TP]synaptics_touch_sysfs_init: Exported GPIO 169.
  550. [ 7.021086] Major number of rmi_char_dev: 249
  551. [ 7.021481] [TP] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in interrupt mode
  552. [ 7.022192] using input dev gpio-keys for key reset
  553. [ 7.026240] using rtc device, rtc_tps80031, for alarms
  554. [ 7.026453] rtc_tps80031 rtc_tps80031.0: rtc core: registered rtc_tps80031 as rtc0
  555. [ 7.072924] i2c /dev entries driver
  556. [ 7.074033] [NFC] pn544_dev_init: Loading pn544 driver
  557. [ 7.074166] [NFC] pn544_probe:
  558. [ 7.074269] config_nfc_gpios
  559. [ 7.074568] [NFC] pn544_probe : requesting IRQ 422
  560. [ 7.074669] Wake13 for irq=422
  561. [ 7.075105] i2c-core: driver [pn544] using legacy suspend method
  562. [ 7.075279] i2c-core: driver [pn544] using legacy resume method
  563. [ 7.075384] BMA250 G-sensor driver: init
  564. [ 7.075591] bma250 probe start
  565. [ 7.075688] BMA250 G-sensor I2C driver: gs_kvalue = 0x67FDF0FC
  566. [ 7.076142] [GSNR][BMA250] BMA_Init: bma250_RANGE_SEL_REG++: range = 0x03, bw = 0x1f
  567. [ 7.076588] [GSNR][BMA250] BMA_Init: bma250_RANGE_SEL_REG--: range = 0x03, bw = 0x0a
  568. [ 7.077095] [GSNR][BMA250] bma250_probe:OK
  569. [ 7.077192] mog bma250 probe end
  570. [ 7.077430] i2c-core: driver [bma250] using legacy suspend method
  571. [ 7.077528] i2c-core: driver [bma250] using legacy resume method
  572. [ 7.077712] [COMP][AKM8975] AKM8975 compass driver for pana gyro: init
  573. [ 7.077844] [COMP][AKM8975] akm8975_probe:
  574. [ 7.078765] Wake15 for irq=298
  575. [ 7.078917] [COMP][AKM8975] akm8975_probe:OK
  576. [ 7.079082] i2c-core: driver [akm8975] using legacy suspend method
  577. [ 7.079258] i2c-core: driver [akm8975] using legacy resume method
  578. [ 7.079397] [GYRO][PANASONIC]
  579. [ 7.079401] Enter ewtzmu_i2c_probe!!
  580. [ 7.093593] [GYRO][PANASONIC] Register input device!
  581. [ 7.093953] input: compass as /devices/virtual/input/input4
  582. [ 7.094711] input: ewtzmu2_gyroscope as /devices/virtual/input/input5
  583. [ 7.112855] [GYRO][PANASONIC] PANA:GYRO:probe success
  584. [ 7.113106] i2c-core: driver [ewtzmu2] using legacy suspend method
  585. [ 7.113203] i2c-core: driver [ewtzmu2] using legacy resume method
  586. [ 7.113510] [PS][cm3629] cm3629_probe
  587. [ 7.113628] _regulator_disable: [REGULATOR]+_regulator_disable ri=gpio-switch-sdmmc_2v85_en
  588. [ 7.113805] _regulator_disable: [REGULATOR]-_regulator_disable ri=gpio-switch-sdmmc_2v85_en
  589. [ 7.120322] [TP] Device Status = 0
  590. [ 7.132854] _regulator_enable: [REGULATOR]+_regulator_enable ri=gpio-switch-sdmmc_2v85_en
  591. [ 7.133034] _regulator_enable: [REGULATOR]-_regulator_enable ri=gpio-switch-sdmmc_2v85_en
  592. [ 7.153043] [PS][cm3629] cm3629_read_chip_id, chip_id value = 0x82, 0xc0, ret 0
  593. [ 7.153219] [PS][cm3629]cm3629_probe: lp_info->ls_cmd = 0x84!
  594. [ 7.153395] [PS][cm3629] cm3629_probe: ls_cmd 0x84, ps1_adc_offset=0x00, ps2_adc_offset=0x00, ps_debounce=0x0
  595. [ 7.153773] input: lightsensor-level as /devices/virtual/input/input6
  596. [ 7.154446] input: proximity as /devices/virtual/input/input7
  597. [ 7.154905] [LS][cm3629] lightsensor_set_kvalue: ALS calibrated als_kadc=0x6da5148d
  598. [ 7.155006] [LS][cm3629] lightsensor_set_kvalue: als_kadc=0x148d, als_gadc=0x13ef
  599. [ 7.155183] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[0], c
  600. [ 7.155358] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[1], e
  601. [ 7.155456] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[2], 10
  602. [ 7.155667] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[3], b5
  603. [ 7.155845] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[4], 174
  604. [ 7.155942] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[5], 10ca
  605. [ 7.156117] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[6], 1bc0
  606. [ 7.156291] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[7], 26e9
  607. [ 7.156386] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[8], 3211
  608. [ 7.156581] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[9], ffff
  609. [ 7.156853] [PS][cm3629] psensor_set_kvalue: PS calibrated ps_kparam1 = 0x50530306, ps_kparam2 = 0xFFFF0A0F
  610. [ 7.157032] [PS][cm3629] psensor_set_kvalue: PS calibrated inte_ps1_canc = 0x0F, inte_ps2_canc = 0x0A, ((ps_kparam2 >> 16) & 0xFF) = 0xFF
  611. [ 7.157573] [LS][cm3629] ls_initial_cmd, cmd[0] = 0x85, cmd[1] = 0x0
  612. [ 7.158351] [PS][cm3629] psensor_initial_cmd, finish
  613. [ 7.158825] Wake34 for irq=306
  614. [ 7.159331] [PS][cm3629] cm3629_probe: Probe success!
  615. [ 7.159507] Linux video capture interface: v2.00
  616. [ 7.159815] usbcore: registered new interface driver uvcvideo
  617. [ 7.159912] USB Video Class driver (v1.0.0)
  618. [ 7.160220] trpc_sema_init: registered misc dev 10:37
  619. [ 7.160461] trpc_node_register: Adding 'local' to node list
  620. [ 7.162922] nvavp nvavp: allocated IOVM at ff00000 for AVP os
  621. [ 7.163393] __tegra_rawchip_probe
  622. [ 7.163566] tegra_rawchip_init:735]
  623. [ 7.163660] [CAM]rawchip_spi_init
  624. [ 7.163780] [CAM]:spi_rawchip_probe
  625. [ 7.164155] tegra_rawchip_init rawchip: success
  626. [ 7.164331] [CAM] rawchip_open_init
  627. [ 7.164816] tegra_camera tegra_camera: tegra_camera_probe
  628. [ 7.165310] ar0832_init: ++
  629. [ 7.165505] ov5650 sensor driver loading
  630. [ 7.165771] ov9726 sensor driver loading
  631. [ 7.166032] ov2710 sensor driver loading
  632. [ 7.166481] s5k3h2y sensor driver loading
  633. [ 7.166609] s5k3h2y_probe: probing sensor.
  634. [ 7.166931] [CAM] s5k3h2y_sysfs_init: kobject creat and add
  635. [ 7.167042] [CAM] s5k3h2y_sysfs_init:sysfs_create_file
  636. [ 7.167226] [CAM] camera_led: kobject creat and add
  637. [ 7.167436] [CAM] s5k6a1gx03 sensor driver loading. s5k6a1gx03_init
  638. [ 7.167647] [CAM] s5k6a1gx03_probe: probing sensor.
  639. [ 7.167893] [CAM]s5k6a1g:kobject creat and add
  640. [ 7.168000] [CAM]s5k6a1g:sysfs_create_file
  641. [ 7.168276] [CAM] ad5823 sensor driver loading
  642. [ 7.168408] [CAM] ad5823: probing sensor.
  643. [ 7.168794] i2c-core: driver [bq20z75-battery] using legacy suspend method
  644. [ 7.168970] i2c-core: driver [bq20z75-battery] using legacy resume method
  645. [ 7.169677] watchdog probe
  646. [ 7.170230] device-mapper: uevent: version 1.0.3
  647. [ 7.170555] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
  648. [ 7.171721] cpuidle: using governor ladder
  649. [ 7.172880] cpuidle: using governor menu
  650. [ 7.173445] sdhci: Secure Digital Host Controller Interface driver
  651. [ 7.173543] sdhci: Copyright(c) Pierre Ossman
  652. [ 7.174909] mmc0: Invalid maximum block size, assuming 512 bytes
  653. [ 7.176179] Registered led device: mmc0::
  654. [ 7.176518] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0 ddr 0
  655. [ 7.177696] mmc0: SDHCI controller on platform [sdhci-tegra.3] using ADMA
  656. [ 7.177719] mmc0: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0 timing 0 ddr 0
  657. [ 7.179161] mmc1: Invalid maximum block size, assuming 512 bytes
  658. [ 7.180443] Registered led device: mmc1::
  659. [ 7.180688] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0 ddr 0
  660. [ 7.181942] mmc1: SDHCI controller on platform [sdhci-tegra.2] using ADMA
  661. [ 7.182253] [LED][PROBE] led driver probe +++
  662. [ 7.182743] Registered led device: amber
  663. [ 7.183005] Registered led device: green
  664. [ 7.183309] Registered led device: button-backlight
  665. [ 7.184489] tegra-i2c tegra-i2c.1: I2c error status 0x00000008
  666. [ 7.184666] tegra-i2c tegra-i2c.1: no acknowledge from address 0x32
  667. [ 7.184764] tegra-i2c tegra-i2c.1: Packet status 0x00010009
  668. [ 7.192889] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 ddr 0
  669. [ 7.202855] LP5521-LED 1-0032: [LED] i2c_write_block retry over 1 times
  670. [ 7.203582] [LED][PROBE] led driver probe ---
  671. [ 7.205079] tegra-se tegra-se: tegra_se_probe: complete
  672. [ 7.209558] usbcore: registered new interface driver usbhid
  673. [ 7.209744] usbhid: USB HID core driver
  674. [ 7.210463] logger: created 256K log 'log_main'
  675. [ 7.210711] logger: created 256K log 'log_events'
  676. [ 7.211022] logger: created 256K log 'log_radio'
  677. [ 7.211246] logger: created 256K log 'log_system'
  678. [ 7.217564] mmc0: clock 400000Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0 timing 0 ddr 0
  679. [ 7.219930] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 ddr 0
  680. [ 7.253509] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 7 width 0 timing 0 ddr 0
  681. [ 7.253698] mmc0: clock 400000Hz busmode 1 powermode 2 cs 1 Vdd 7 width 0 timing 0 ddr 0
  682. [ 7.255978] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 7 width 0 timing 0 ddr 0
  683. [ 7.274055] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 0 ddr 0
  684. [ 7.289604] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 1 ddr 0
  685. [ 7.289715] mmc0: clock 52000000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 1 ddr 0
  686. [ 7.291000] mmc0: clock 52000000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 3 timing 1 ddr 0
  687. [ 7.292261] mmc0: clock 52000000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 3 timing 5 ddr 0
  688. [ 7.292448] mmc0: clock 52000000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 3 timing 5 ddr 0
  689. [ 7.292576] mmc0: new high speed DDR MMC card at address 0001
  690. [ 7.293356] mmcblk0: mmc0:0001 K2U00M 29.1 GiB
  691. [ 7.295882] Primary GPT is invalid, using alternate GPT.
  692. [ 7.296140] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20
  693. [ 7.300090] mmc1: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0 timing 0 ddr 0
  694. [ 7.300306] enterprise_wifi_power: Powering on wifi
  695. [ 7.332851] mmc1: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 ddr 0
  696. [ 7.357530] mmc1: clock 400000Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0 timing 0 ddr 0
  697. [ 7.359886] mmc1: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 ddr 0
  698. [ 7.363767] mmc1: card claims to support voltages below the defined range. These will be ignored.
  699. [ 7.363951] mmc1: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 7 width 0 timing 0 ddr 0
  700. [ 7.364720] mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 0 ddr 0
  701. [ 7.373824] mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 2 ddr 0
  702. [ 7.374011] mmc1: clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 2 ddr 0
  703. [ 7.374186] mmc1: clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 2 timing 2 ddr 0
  704. [ 7.375470] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
  705. [ 7.376695] mmc1: new high speed SDIO card at address 0001
  706. [ 7.376983] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0 ddr 0
  707. [ 7.378170] enterprise_wifi_power: Powering off wifi
  708. [ 7.481194] android_usb gadget: high speed config #1: android
  709. [ 7.481678] [USB] set usb_connect2pc = 1
  710. [ 7.763846] [AUD] SPI control for AIC3008 started successfully...
  711. [ 7.765798] [AUD] starting tegra_aic3008_driver_probe...
  712. [ 7.766236] [AUD] aic3008_probe() start... aic3008_codec:cd439a00
  713. [ 7.766413] [AUD] aic3008_config: AIC3008 is power off now
  714. [ 7.790084] [AUD] Audio Codec Driver init complete in 27 ms
  715. [ 7.790471] [PWR_STORY][AUD] Turn on
  716. [ 7.790575] [AUD] [PWR] ***** gpio AUD_MCLK_EN 191 output enable *****
  717. [ 7.790749] [AUD] [PWR] ***** gpio AUD_AIC3008_RST# 181 output enable *****
  718. [ 7.790860] _regulator_enable: [REGULATOR]+_regulator_enable ri=gpio-switch-aud_a1v8_en
  719. [ 7.791039] _regulator_enable: [REGULATOR]-_regulator_enable ri=gpio-switch-aud_a1v8_en
  720. [ 7.791217] [AUD] [PWR] ***** regulator v_aud_a1v8 26 enable *****
  721. [ 7.791317] _regulator_enable: [REGULATOR]+_regulator_enable ri=gpio-switch-aud_3v3_en
  722. [ 7.791491] _regulator_enable: [REGULATOR]-_regulator_enable ri=gpio-switch-aud_3v3_en
  723. [ 7.791663] [AUD] [PWR] ***** regulator v_aud_3v3 10 enable *****
  724. [ 7.792933] asoc: aic3008-hifi <-> tegra30-i2s.1 mapping ok
  725. [ 7.793662] asoc: dit-hifi <-> tegra30-spdif mapping ok
  726. [ 7.794844] ALSA device list:
  727. [ 7.794942] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
  728. [ 7.795116] #1: tegra-aic3008
  729. [ 7.795490] GACT probability NOT on
  730. [ 7.795591] Mirror/redirect action on
  731. [ 7.795763] u32 classifier
  732. [ 7.795855] Actions configured
  733. [ 7.795950] Netfilter messages via NETLINK v0.30.
  734. [ 7.796190] nf_conntrack version 0.5.0 (15616 buckets, 62464 max)
  735. [ 7.798873] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  736. [ 7.799053] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  737. [ 7.799544] xt_time: kernel timezone is -0000
  738. [ 7.799960] ip_tables: (C) 2000-2006 Netfilter Core Team
  739. [ 7.800491] arp_tables: (C) 2002 David S. Miller
  740. [ 7.800775] TCP cubic registered
  741. [ 7.800871] Initializing XFRM netlink socket
  742. [ 7.801212] NET: Registered protocol family 10
  743. [ 7.802890] Mobile IPv6
  744. [ 7.803027] ip6_tables: (C) 2000-2006 Netfilter Core Team
  745. [ 7.803506] IPv6 over IPv4 tunneling driver
  746. [ 7.805329] NET: Registered protocol family 17
  747. [ 7.805461] NET: Registered protocol family 15
  748. [ 7.805558] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  749. [ 7.805974] Registering SWP/SWPB emulation handler
  750. [ 7.823598] Disabling clocks left on by bootloader:
  751. [ 7.823701] audio_2x
  752. [ 7.823798] audio4_2x
  753. [ 7.823893] audio3_2x
  754. [ 7.824066] audio2_2x
  755. [ 7.824161] audio1_2x
  756. [ 7.824255] audio0_2x
  757. [ 7.824351] audio
  758. [ 7.824443] audio4
  759. [ 7.824613] audio3
  760. [ 7.824704] audio2
  761. [ 7.824795] audio1
  762. [ 7.824887] audio0
  763. [ 7.825046] uarta
  764. [ 7.825243] fuse_burn
  765. [ 7.825347] cclk_lp
  766. [ 7.825443] pll_x_out0
  767. [ 7.825535] pll_d2_out0
  768. [ 7.825629] pll_c_out1
  769. [ 7.825804] pll_m_out1
  770. [ 7.825965] CPU rate: 1000 MHz
  771. [ 7.826136] tegra_fuse_program_init: no vdd_fuse. fuse write disabled
  772. [ 7.828039] tegra3_dvfs: minimum cap.cbus rate 228000000 requires 1000 mV
  773. [ 7.828292] tegra dvfs: tegra sysfs cap interface is initialized
  774. [ 7.828823] tegra_actmon.emc: Completed initialization (0)
  775. [ 7.829082] tegra_actmon.avp: Completed initialization (0)
  776. [ 7.829879] [GPIO_SETUP] force to obtain requested gpio: 171 (GPIO_PV3)
  777. [ 7.830056] [GPIO_SETUP] force to obtain requested gpio: 127 (DAP4_SCLK)
  778. [ 7.830805] [HS_MGR] (htc_headset_mgr_init) INIT
  779. [ 7.831003] [HS_MGR] (htc_headset_mgr_probe) ++++++++++++++++++++
  780. [ 7.831856] input: h2w headset as /devices/virtual/input/input8
  781. [ 7.832254] using input dev h2w headset for key reset
  782. [ 7.832889] [HS_MGR] (hs_notify_driver_ready) HS_MGR ready
  783. [ 7.833224] [HS_MGR] (htc_headset_mgr_probe) --------------------
  784. [ 7.833499] [HS_GPIO] (htc_headset_gpio_init) INIT
  785. [ 7.833711] [HS_PMIC] (htc_headset_pmic_init) INIT
  786. [ 7.833943] [HS_PMIC] (htc_headset_pmic_probe) ++++++++++++++++++++
  787. [ 7.834271] [HS_MGR] (headset_notifier_register) Register REMOTE_ADC notifier
  788. [ 7.834452] [HS_MGR] (headset_notifier_register) Register REMOTE_KEYCODE notifier
  789. [ 7.834626] [HS_MGR] (headset_notifier_register) Register RPC_KEY notifier
  790. [ 7.834723] [HS_MGR] (headset_notifier_register) Register MIC_STATUS notifier
  791. [ 7.834900] [HS_MGR] (hs_notify_driver_ready) HS_PMIC ready
  792. [ 7.835164] [HS_GPIO] (htc_headset_gpio_probe) ++++++++++++++++++++
  793. [ 7.835536] Wake12 for irq=402
  794. [ 7.835749] Wake12 for irq=402
  795. [ 7.835845] Enabling wake12
  796. [ 7.835941] gpio bank wake found: wake12 for irq=119
  797. [ 7.836034] Enabling wake12
  798. [ 7.836128] [HS_MGR] (headset_notifier_register) Register HPIN_GPIO notifier
  799. [ 7.836300] [HS_MGR] (hs_notify_driver_ready) HS_GPIO ready
  800. [ 7.836472] [HS_GPIO] (htc_headset_gpio_probe) --------------------
  801. [ 7.836575] [HS_PMIC] (htc_headset_pmic_probe) --------------------
  802. [ 7.836820] [Poke] poke init.
  803. [ 7.838392] [BKL] POWER_CONTROL = 0x50155
  804. [ 7.838490] [BKL] POWER_CONTROL = 0x10155
  805. [ 7.838800] brightness orig = 255, transformed=255
  806. [ 7.838898] [DISP] tegra_pwm_backlight_update_status brightness=255 ,duty_cycle=255
  807. [ 7.840263] regulator_init_complete: tps80031_VANA: incomplete constraints, leaving on
  808. [ 7.840366] regulator_init_complete: tps80031_LDOLN: incomplete constraints, leaving on
  809. [ 7.840543] regulator_init_complete: tps80031_LDO7: incomplete constraints, leaving on
  810. [ 7.840720] regulator_init_complete: tps80031_LDO6: incomplete constraints, leaving on
  811. [ 7.840897] regulator_init_complete: tps80031_LDO5: incomplete constraints, leaving on
  812. [ 7.840994] regulator_init_complete: tps80031_LDO4: incomplete constraints, leaving on
  813. [ 7.841174] regulator_init_complete: tps80031_SMPS2: incomplete constraints, leaving on
  814. [ 7.841350] regulator_init_complete: tps80031_SMPS1: incomplete constraints, leaving on
  815. [ 7.843231] rtc_tps80031 rtc_tps80031.0: setting system clock to 2013-03-03 02:58:21 UTC (1362279501)
  816. [ 7.843477] [BOOT_LOG] Leaving do_initcalls
  817. [ 7.843731] Warning: unable to open an initial console.
  818. [ 7.843924] Freeing init memory: 268K
  819. [ 7.844017] [BOOT_LOG] Entering run_init_process
  820. [ 8.062386] init: Unable to open persistent property directory /data/property errno: 2
  821. [ 8.066550] [USB] enable_store, buff: 0
  822. [ 8.066951] init: no such service 'load-modem'
  823. [ 8.067278] [USB] idVendor_store: 18D1
  824. [ 8.067685] [USB] idProduct_store: D001
  825. [ 8.068200] [USB] functions_store: buff: adb
  826. [ 8.068608] [BATT] htc_batt_open: open misc device driver. at 8065768002 (2013-03-03 02:58:21.725381000 UTC)
  827. [ 8.068629] [USB] android_switch_function: 3, before 1
  828. [ 8.068753] [USB] # mass_storage
  829. [ 8.068760] [USB] # adb
  830. [ 8.068775] [USB] android_switch_function: vendor_id=0xbb4, product_id=0xcd6
  831. [ 8.068790] [USB] android_bind_enabled_functions bind name: mass_storage
  832. [ 8.068815] [USB] android_bind_enabled_functions bind name: adb
  833. [ 8.068822] [USBF] adb_bind_config
  834. [ 8.069070] [USB] adb_count_set: count(0) -> 0
  835. [ 8.069080] [USB] adb_function_bind: done
  836. [ 24.221177] Restarting system with command 'bootloader'.
  837.  
  838. No errors detected
  839. Boot info:
  840. start_on_event=none, last_off_event=pmu_poweroff
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!