Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ===================================================================
- MT7621 stage1 code 16:20:29 (ASIC)
- CPU=50000000 HZ BUS=16666666 HZ
- ==================================================================
- Change MPLL source from XTAL to CR...
- do MEMPLL setting..
- MEMPLL Config : 0x21000000
- 3PLL mode + External loopback
- === XTAL-40Mhz === DDR-800Mhz ===
- PLL2 FB_DL: 0x10, 1/0 = 659/365 41000000
- PLL3 FB_DL: 0x12, 1/0 = 623/401 49000000
- PLL4 FB_DL: 0x14, 1/0 = 631/393 51000000
- do DDR setting..[00320000]
- Apply DDR3 Setting...(use default AC)
- 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
- --------------------------------------------------------------------------------
- 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
- 000F:| 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1
- 0010:| 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0
- 0011:| 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0
- 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- rank 0 coarse = 16
- rank 0 fine = 56
- B:| 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0
- opt_dle value:10
- DRAMC_R0DELDLY[018]=00002E2E
- ==================================================================
- RX DQS perbit delay software calibration
- ==================================================================
- 1.0-15 bit dq delay value
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 9 7 9 10 7 8 7 6 5 6
- 10 | 6 9 6 9 6 10
- --------------------------------------
- ==================================================================
- 2.dqs window
- x=pass dqs delay value (min~max)center
- y=0-7bit DQ of every group
- input delay:DQS0 =46 DQS1 = 46
- ==================================================================
- bit DQS0 bit DQS1
- 0 (1~92)46 8 (1~89)45
- 1 (0~90)45 9 (1~86)43
- 2 (1~90)45 10 (1~90)45
- 3 (1~91)46 11 (1~90)45
- 4 (1~92)46 12 (1~86)43
- 5 (1~91)46 13 (2~87)44
- 6 (1~88)44 14 (1~89)45
- 7 (1~92)46 15 (1~92)46
- ==================================================================
- 3.dq delay value last
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 9 8 10 10 7 8 9 6 6 9
- 10 | 7 10 9 11 7 10
- ==================================================================
- ==================================================================
- TX perbyte calibration
- ==================================================================
- DQS loop = 15, cmp_err_1 = ffff0000
- dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1
- dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2
- DQ loop=15, cmp_err_1 = ffff0000
- dqs_perbyte_dly.last_dqdly_pass[0]=15, finish count=1
- dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=2
- byte:0, (DQS,DQ)=(8,8)
- byte:1, (DQS,DQ)=(8,8)
- 20,data:88
- [EMI] DRAMC calibration passed
- ===================================================================
- MT7621 stage1 code done
- CPU=50000000 HZ BUS=16666666 HZ
- ===================================================================
- GPIO Init:
- UARTF_SHARE_MODE:GPIO
- GPIO_MODE_REG:0xc340609c
- ReadyLED Bit:0x2000
- U-Boot 1.1.3 (Aug 3 2015 - 10:33:43)
- Board:Ralink APSoC DRAM: Memory Testing..256 MB
- relocate_code Pointer at: 8ffb0000
- Config XHCI 40M PLL
- flash manufacture id: ef, device id 40 18
- Warning: un-recognized chip ID, please update bootloader!
- *** Warning - bad CRC, using default environment
- _______________________________________________________________
- | ____ _ ____ |
- | | _ \ __ _ _ __ __| | ___ _ __ __ _| __ ) _____ __ |
- | | |_) / _` | '_ \ / _` |/ _ \| '__/ _` | _ \ / _ \ \/ / |
- | | __/ (_| | | | | (_| | (_) | | | (_| | |_) | (_) > < |
- | |_| \__,_|_| |_|\__,_|\___/|_| \__,_|____/ \___/_/\_\ |
- | |
- | Ralink/MTK SDK Plantform |
- | Copyright 2005-2015 |
- | Board:Ralink RT305x |
- | |
- | <www.zbt-china.com> |
- |______________________________________________________________|
- ============================================
- Ralink UBoot Version: 4.2.S.1
- --------------------------------------------
- ASIC 7621_MP (MAC to MT7530 Mode)
- DRAM_CONF_FROM: Auto-Detection
- DRAM_TYPE: DDR3
- DRAM bus: 16 bit
- Xtal Mode=3 OCP Ratio=1/3
- Flash component: SPI Flash
- Date:Aug 3 2015 Time:10:33:43
- ============================================
- CPU Speed: 880 MHZ
- RAM Size:512 Mbytes
- Build Date:Aug 3 2015 Time:10:33:43
- ============================================
- #Reset_MT7530
- set LAN/WAN LLLLW
- GPIO Init:
- UARTF_SHARE_MODE:GPIO
- GPIO_MODE_REG:0xc340609c
- ReadyLED Bit:0x2000
- Please choose the operation:
- 1: Load system code to SDRAM via TFTP.
- 2: Load system code then write to Flash via TFTP.
- 3: Boot system code via Flash (default).
- 4: Entr boot command line interface.
- 7: Load Boot Loader code then write to Flash via Serial.
- 9: Load Boot Loader code then write to Flash via TFTP. 0
- 3: System Boot system code via Flash.
- Press Reset button enter upgrade mode!
- ## Booting image at bfc50000 ...
- Image Name: OpenWrt Linux-3.10.14-p112871
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 1413521 Bytes = 1.3 MB
- Load Address: 80001000
- Entry Point: 80001000
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- No initrd
- ## Transferring control to Linux (at address 80001000) ...
- ## Giving linux memsize in MB, 256
- Starting kernel ...
- LINUX started...
- THIS IS ASIC
- [ 0.000000] Linux version 3.10.14 (zbt123@zbt-server) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #3 SMP Mon Sep 7 17:53:28 CST 2015
- [ 0.000000]
- [ 0.000000] The CPU feqenuce set to 880 MHz
- [ 0.000000] GCMP present
- [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
- [ 0.000000] Software DMA cache coherency
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 1c000000 @ 00000000 (usable)
- [ 0.000000] memory: 04000000 @ 20000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x1fffffff]
- [ 0.000000] HighMem [mem 0x20000000-0x23ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x1bffffff]
- [ 0.000000] node 0: [mem 0x20000000-0x23ffffff]
- [ 0.000000] avail: cpu1 is not ready
- [ 0.000000] avail: cpu2 is not ready
- [ 0.000000] avail: cpu3 is not ready
- [ 0.000000] Detected 0 available secondary CPU(s)
- [ 0.000000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.000000] PERCPU: Embedded 7 pages/cpu @81484000 s6656 r8192 d13824 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
- [ 0.000000] Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock5 rootfstype=squashfs,jffs2
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Writing ErrCtl register=00000700
- [ 0.000000] Readback ErrCtl register=00000700
- [ 0.000000] Memory: 514692k/458752k available (3112k kernel code, 9596k reserved, 796k data, 244k init, 65536k highmem)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
- [ 0.000000] NR_IRQS:128
- [ 0.000000] console [ttyS1] enabled
- [ 0.144000] Calibrating delay loop... 583.68 BogoMIPS (lpj=1167360)
- [ 0.180000] pid_max: default: 32768 minimum: 301
- [ 0.184000] Mount-cache hash table entries: 512
- [ 0.188000] Brought up 1 CPUs
- [ 0.192000] NET: Registered protocol family 16
- [ 0.496000] release PCIe RST: RALINK_RSTCTRL = 7000000
- [ 0.500000] PCIE PHY initialize
- [ 0.504000] ***** Xtal 40MHz *****
- [ 0.508000] start MT7621 PCIe register access
- [ 1.108000] RALINK_RSTCTRL = 7000000
- [ 1.112000] RALINK_CLKCFG1 = 77ffeff8
- [ 1.116000]
- [ 1.116000] *************** MT7621 PCIe RC mode *************
- [ 1.616000] pcie_link status = 0x7
- [ 1.620000] RALINK_RSTCTRL= 7000000
- [ 1.624000] *** Configure Device number setting of Virtual PCI-PCI bridge ***
- [ 1.628000] RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2
- [ 1.632000] PCIE0 enabled
- [ 1.636000] PCIE1 enabled
- [ 1.640000] PCIE2 enabled
- [ 1.644000] interrupt enable status: 700000
- [ 1.648000] Port 2 N_FTS = 1b105000
- [ 1.652000] Port 1 N_FTS = 1b105000
- [ 1.656000] Port 0 N_FTS = 1b105000
- [ 1.660000] config reg done
- [ 1.664000] init_rt2880pci done
- [ 1.684000] bio: create slab <bio-0> at 0
- [ 1.688000] SCSI subsystem initialized
- [ 1.692000] usbcore: registered new interface driver usbfs
- [ 1.696000] usbcore: registered new interface driver hub
- [ 1.700000] usbcore: registered new device driver usb
- [ 1.704000] PCI host bridge to bus 0000:00
- [ 1.708000] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
- [ 1.712000] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff]
- [ 1.716000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 1.720000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 1.724000] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 1.728000] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 1.732000] pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
- [ 1.736000] pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000)
- [ 1.740000] pci 0000:00:02.0: BAR 0: can't assign mem (size 0x80000000)
- [ 1.744000] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
- [ 1.748000] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
- [ 1.752000] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
- [ 1.756000] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
- [ 1.760000] pci 0000:00:02.0: BAR 8: assigned [mem 0x60400000-0x604fffff]
- [ 1.764000] pci 0000:00:02.0: BAR 9: assigned [mem 0x60500000-0x605fffff pref]
- [ 1.768000] pci 0000:00:00.0: BAR 1: assigned [mem 0x60600000-0x6060ffff]
- [ 1.772000] pci 0000:00:01.0: BAR 1: assigned [mem 0x60610000-0x6061ffff]
- [ 1.776000] pci 0000:00:02.0: BAR 1: assigned [mem 0x60620000-0x6062ffff]
- [ 1.780000] pci 0000:00:02.0: BAR 7: assigned [io 0x1e160000-0x1e160fff]
- [ 1.784000] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
- [ 1.788000] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
- [ 1.792000] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 1.796000] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- [ 1.800000] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
- [ 1.804000] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit]
- [ 1.808000] pci 0000:02:00.0: BAR 6: assigned [mem 0x60300000-0x6030ffff pref]
- [ 1.812000] pci 0000:00:01.0: PCI bridge to [bus 02]
- [ 1.816000] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff]
- [ 1.820000] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref]
- [ 1.824000] pci 0000:03:00.0: BAR 6: assigned [mem 0x60500000-0x6050ffff pref]
- [ 1.828000] pci 0000:03:00.0: BAR 5: assigned [mem 0x60400000-0x604001ff]
- [ 1.832000] pci 0000:03:00.0: BAR 4: assigned [io 0x1e160000-0x1e16001f]
- [ 1.836000] pci 0000:03:00.0: BAR 0: assigned [io 0x1e160020-0x1e160027]
- [ 1.840000] pci 0000:03:00.0: BAR 2: assigned [io 0x1e160028-0x1e16002f]
- [ 1.844000] pci 0000:03:00.0: BAR 1: assigned [io 0x1e160030-0x1e160033]
- [ 1.848000] pci 0000:03:00.0: BAR 3: assigned [io 0x1e160034-0x1e160037]
- [ 1.852000] pci 0000:00:02.0: PCI bridge to [bus 03]
- [ 1.856000] pci 0000:00:02.0: bridge window [io 0x1e160000-0x1e160fff]
- [ 1.860000] pci 0000:00:02.0: bridge window [mem 0x60400000-0x604fffff]
- [ 1.864000] pci 0000:00:02.0: bridge window [mem 0x60500000-0x605fffff pref]
- [ 1.868000] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
- [ 1.872000] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
- [ 1.876000] PCI: Enabling device 0000:00:02.0 (0004 -> 0007)
- [ 1.880000] BAR0 at slot 0 = 0
- [ 1.884000] bus=0x0, slot = 0x0
- [ 1.888000] res[0]->start = 0
- [ 1.892000] res[0]->end = 0
- [ 1.896000] res[1]->start = 60600000
- [ 1.900000] res[1]->end = 6060ffff
- [ 1.904000] res[2]->start = 0
- [ 1.908000] res[2]->end = 0
- [ 1.912000] res[3]->start = 0
- [ 1.916000] res[3]->end = 0
- [ 1.920000] res[4]->start = 0
- [ 1.924000] res[4]->end = 0
- [ 1.928000] res[5]->start = 0
- [ 1.932000] res[5]->end = 0
- [ 1.936000] BAR0 at slot 1 = 0
- [ 1.940000] bus=0x0, slot = 0x1
- [ 1.944000] res[0]->start = 0
- [ 1.948000] res[0]->end = 0
- [ 1.952000] res[1]->start = 60610000
- [ 1.956000] res[1]->end = 6061ffff
- [ 1.960000] res[2]->start = 0
- [ 1.964000] res[2]->end = 0
- [ 1.968000] res[3]->start = 0
- [ 1.972000] res[3]->end = 0
- [ 1.976000] res[4]->start = 0
- [ 1.980000] res[4]->end = 0
- [ 1.984000] res[5]->start = 0
- [ 1.988000] res[5]->end = 0
- [ 1.992000] BAR0 at slot 2 = 0
- [ 1.996000] bus=0x0, slot = 0x2
- [ 2.000000] res[0]->start = 0
- [ 2.004000] res[0]->end = 0
- [ 2.008000] res[1]->start = 60620000
- [ 2.012000] res[1]->end = 6062ffff
- [ 2.016000] res[2]->start = 0
- [ 2.020000] res[2]->end = 0
- [ 2.024000] res[3]->start = 0
- [ 2.028000] res[3]->end = 0
- [ 2.032000] res[4]->start = 0
- [ 2.036000] res[4]->end = 0
- [ 2.040000] res[5]->start = 0
- [ 2.044000] res[5]->end = 0
- [ 2.048000] bus=0x1, slot = 0x0, irq=0x4
- [ 2.052000] res[0]->start = 60000000
- [ 2.056000] res[0]->end = 600fffff
- [ 2.060000] res[1]->start = 0
- [ 2.064000] res[1]->end = 0
- [ 2.068000] res[2]->start = 0
- [ 2.072000] res[2]->end = 0
- [ 2.076000] res[3]->start = 0
- [ 2.080000] res[3]->end = 0
- [ 2.084000] res[4]->start = 0
- [ 2.088000] res[4]->end = 0
- [ 2.092000] res[5]->start = 0
- [ 2.096000] res[5]->end = 0
- [ 2.100000] bus=0x2, slot = 0x1, irq=0x18
- [ 2.104000] res[0]->start = 60200000
- [ 2.108000] res[0]->end = 602fffff
- [ 2.112000] res[1]->start = 0
- [ 2.116000] res[1]->end = 0
- [ 2.120000] res[2]->start = 0
- [ 2.124000] res[2]->end = 0
- [ 2.128000] res[3]->start = 0
- [ 2.132000] res[3]->end = 0
- [ 2.136000] res[4]->start = 0
- [ 2.140000] res[4]->end = 0
- [ 2.144000] res[5]->start = 0
- [ 2.148000] res[5]->end = 0
- [ 2.152000] bus=0x3, slot = 0x2, irq=0x19
- [ 2.156000] res[0]->start = 1e160020
- [ 2.160000] res[0]->end = 1e160027
- [ 2.164000] res[1]->start = 1e160030
- [ 2.168000] res[1]->end = 1e160033
- [ 2.172000] res[2]->start = 1e160028
- [ 2.176000] res[2]->end = 1e16002f
- [ 2.180000] res[3]->start = 1e160034
- [ 2.184000] res[3]->end = 1e160037
- [ 2.188000] res[4]->start = 1e160000
- [ 2.192000] res[4]->end = 1e16001f
- [ 2.196000] res[5]->start = 60400000
- [ 2.200000] res[5]->end = 604001ff
- [ 2.204000] Switching to clocksource MIPS
- [ 2.208000] NET: Registered protocol family 2
- [ 2.216000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- [ 2.232000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- [ 2.244000] TCP: Hash tables configured (established 4096 bind 4096)
- [ 2.256000] TCP: reno registered
- [ 2.264000] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 2.276000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 2.288000] NET: Registered protocol family 1
- [ 2.384000] 4 CPUs re-calibrate udelay(lpj = 1167360)
- [ 2.400000] bounce pool size: 64 pages
- [ 2.404000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 2.416000] jffs2: version 2.2. (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 2.436000] msgmni has been set to 877
- [ 2.444000] io scheduler noop registered (default)
- [ 2.456000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 2.468000] serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A
- [ 2.480000] serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A
- [ 2.496000] Ralink gpio driver initialized
- [ 2.504000] flash manufacture id: ef, device id 40 18
- [ 2.516000] W25Q128BV(ef 40180000) (16384 Kbytes)
- [ 2.524000] mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
- [ 2.544000] Creating 5 MTD partitions on "raspi":
- [ 2.552000] 0x000000000000-0x000001000000 : "ALL"
- [ 2.564000] 0x000000000000-0x000000030000 : "Bootloader"
- [ 2.576000] 0x000000030000-0x000000040000 : "Config"
- [ 2.584000] 0x000000040000-0x000000050000 : "Factory"
- [ 2.596000] 0x000000050000-0x000001000000 : "firmware"
- [ 2.608000] 0x0000001a91d1-0x000001000000 : "rootfs"
- [ 2.620000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
- [ 2.644000] mtd: partition "rootfs_data" created automatically, ofs=0x560000, len=0xaa0000
- [ 2.660000] 0x000000560000-0x000001000000 : "rootfs_data"
- [ 2.672000] rdm_major = 253
- [ 2.676000] GMAC1_MAC_ADRH -- : 0x000078a3
- [ 2.688000] GMAC1_MAC_ADRL -- : 0x5109ab5a
- [ 2.696000] Ralink APSoC Ethernet Driver Initilization. v3.1 512 rx/tx descriptors allocated, mtu = 1500!
- [ 2.712000] GMAC1_MAC_ADRH -- : 0x000078a3
- [ 2.720000] GMAC1_MAC_ADRL -- : 0x5109ab5a
- [ 2.732000] PROC INIT OK!
- [ 2.736000] GobiNet: 2011-07-29-1026
- [ 2.744000] usbcore: registered new interface driver GobiNet
- [ 2.756000] *****run project phy.
- [ 2.768000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 2.784000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 2.800000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 2.816000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 2.832000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 2.848000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 2.864000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 2.880000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 2.896000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 2.912000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 2.944000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 2.960000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 2.976000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 2.992000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 3.008000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 3.024000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 3.040000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 3.056000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 3.072000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 3.088000] FM_OUT value: u4FmOut = 0(0x00000000)
- [ 3.216000] xhci-hcd xhci-hcd: xHCI Host Controller
- [ 3.224000] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 1
- [ 3.240000] xhci-hcd xhci-hcd: irq 22, io mem 0x1e1c0000
- [ 3.252000] hub 1-0:1.0: USB hub found
- [ 3.260000] hub 1-0:1.0: 2 ports detected
- [ 3.268000] xhci-hcd xhci-hcd: xHCI Host Controller
- [ 3.276000] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
- [ 3.292000] hub 2-0:1.0: USB hub found
- [ 3.300000] hub 2-0:1.0: 1 port detected
- [ 3.308000] usbcore: registered new interface driver usb-storage
- [ 3.320000] usbcore: registered new interface driver usbserial
- [ 3.332000] usbcore: registered new interface driver usbserial_generic
- [ 3.344000] usbserial: USB Serial support registered for generic
- [ 3.356000] usbcore: registered new interface driver option
- [ 3.368000] usbserial: USB Serial support registered for GSM modem (1-port)
- [ 3.384000] TCP: cubic registered
- [ 3.392000] NET: Registered protocol family 10
- [ 3.400000] NET: Registered protocol family 17
- [ 3.408000] 8021q: 802.1Q VLAN Support v1.8
- [ 3.452000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
- [ 3.464000] Freeing unused kernel memory: 244K (803d3000 - 80410000)
- procd: Console is alive
- [ 5.048000] Uniform Multi-Platform E-IDE driver
- [ 5.076000] ahci: SSS flag set, parallel bus scan disabled
- [ 5.088000] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
- [ 5.104000] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
- [ 5.124000] scsi0 : ahci
- [ 5.128000] scsi1 : ahci
- [ 5.132000] ata1: SATA max UDMA/133 abar m512@0x60400000 port 0x60400100 irq 25
- [ 5.148000] ata2: SATA max UDMA/133 abar m512@0x60400000 port 0x60400180 irq 25
- [ 5.484000] ata1: SATA link down (SStatus 0 SControl 300)
- [ 5.812000] ata2: SATA link down (SStatus 0 SControl 300)
- [ 5.824000] sdhci: Secure Digital Host Controller Interface driver
- [ 5.836000] sdhci: Copyright(c) Pierre Ossman
- [ 5.848000] sdhci-pltfm: SDHCI platform and OF driver helper
- procd: - preinit -
- [ 6.964000] Raeth v3.1 (Tasklet)
- [ 6.976000] phy_free_head is 0x1bf5e000!!!
- [ 6.984000] phy_free_tail_phy is 0x1bf5fff0!!!
- [ 6.992000] txd_pool=bbf68000 phy_txd_pool=1BF68000
- [ 7.000000] ei_local->skb_free start address is 0x9be154d4.
- [ 7.012000] free_txd: bbf68010, ei_local->cpu_ptr: 1BF68000
- [ 7.024000] POOL HEAD_PTR | DMA_PTR | CPU_PTR
- [ 7.032000] ----------------+---------+--------
- [ 7.040000] 0xbbf68000 0x1BF68000 0x1BF68000
- [ 7.052000]
- [ 7.052000] phy_qrx_ring = 0x1bfd3000, qrx_ring = 0xbbfd3000
- [ 7.068000]
- [ 7.068000] phy_rx_ring0 = 0x1b4d8000, rx_ring0 = 0xbb4d8000
- [ 7.092000] change HW-TRAP to 0x17ccf
- [ 7.100000] set LAN/WAN LLLLW
- [ 7.112000] GMAC1_MAC_ADRH -- : 0x000078a3
- [ 7.120000] GMAC1_MAC_ADRL -- : 0x5109ab5a
- [ 7.128000] CDMA_CSG_CFG = 81000000
- [ 7.132000] GDMA1_FWD_CFG = 20710000
- Press the [f] key and hit [enter] to enter failsafe mode
- Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
- kmod: ran 1 iterations
- [ 10.756000] ESW: Link Status Changed - Port3 Link UP
- [ 10.988000] jffs2: notice: (287) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 13 of xref (0 dead, 0 orphan) found.
- block: extroot: no root or overlay mount defined
- jffs2 is ready
- jffs2 is ready
- [ 11.076000] jffs2: notice: (284) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 13 of xref (0 dead, 0 orphan) found.
- switching to overlay
- [ 11.120000] ra2880stop()...Done
- [ 11.128000] Free TX/RX Ring Memory!
- procd: - early -
- procd: - ubus -
- procd: - init -
- Please press Enter to activate this console.
- [ 13.224000] NTFS driver 2.1.30 [Flags: R/O MODULE].
- [ 13.256000] nf_conntrack version 0.5.0 (8045 buckets, 32180 max)
- [ 13.280000] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 13.424000] u32 classifier
- [ 13.432000] input device check on
- [ 13.440000] Actions configured
- [ 13.448000] Mirror/redirect action on
- [ 13.464000] MTK MSDC device init.
- [ 13.496000] msdc0 -> ================ <- msdc_set_mclk() : L<686> PID<kmodloader><0x226>
- [ 13.512000] msdc0 -> !!! Set<400KHz> Source<50000KHz> -> sclk<390KHz> <- msdc_set_mclk() : L<687> PID<kmodloader><0x226>
- [ 13.532000] msdc0 -> ================ <- msdc_set_mclk() : L<688> PID<kmodloader><0x226>
- [ 13.564000] msdc0 -> ops_get_cd return<0> <- msdc_ops_get_cd() : L<2317> PID<kworker/u2:1><0xb>
- [ 13.580000] msdc0 -> set mclk to 0!!! <- msdc_set_mclk() : L<634> PID<kworker/u2:1><0xb>
- [ 13.596000] mtk-sd: MediaTek MT6575 MSDC Driver
- [ 14.088000] register rt2860
- [ 14.104000]
- [ 14.104000]
- [ 14.104000] === pAd = c0781000, size = 1980536 ===
- [ 14.104000]
- [ 14.124000] <-- RTMPAllocTxRxRingMemory, Status=0
- [ 14.136000] <-- RTMPAllocAdapterBlock, Status=0
- [ 14.144000] pAd->CSRBaseAddress =0xc0680000, csr_addr=0xc0680000!
- [ 14.156000] device_id =0x7662
- [ 14.160000] ==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0x20a
- [ 14.184000] E2pAccessMode=2
- [ 14.188000] cfg_mode=14
- [ 14.192000] cfg_mode=14
- [ 14.200000] wmode_band_equal(): Band Not Equal!
- [ 14.212000] APSDCapable[0]=0
- [ 14.216000] APSDCapable[1]=0
- [ 14.220000] APSDCapable[2]=0
- [ 14.228000] APSDCapable[3]=0
- [ 14.232000] APSDCapable[4]=0
- [ 14.240000] APSDCapable[5]=0
- [ 14.244000] APSDCapable[6]=0
- [ 14.252000] APSDCapable[7]=0
- [ 14.256000] APSDCapable[8]=0
- [ 14.260000] APSDCapable[9]=0
- [ 14.268000] APSDCapable[10]=0
- [ 14.272000] APSDCapable[11]=0
- [ 14.280000] APSDCapable[12]=0
- [ 14.284000] APSDCapable[13]=0
- [ 14.292000] APSDCapable[14]=0
- [ 14.296000] APSDCapable[15]=0
- [ 14.304000] default ApCl
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement