API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jun 14th, 2015
299
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.93 KB | None | 0 0
raw download clone embed print report
  1. root@OpenWrt:~# dmesg
  2. [ 0.000000] Linux version 3.3.8 (blogic@Debian-60-squeeze-64-minimal) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sun Nov 18 04:31:55 UTC 2012
  3. [ 0.000000] MyLoader: sysp=567ee5d2, boardp=a198bc65, parts=9e05a372
  4. [ 0.000000] bootconsole [early0] enabled
  5. [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
  6. [ 0.000000] SoC: Atheros AR9330 rev 1
  7. [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
  8. [ 0.000000] Determined physical RAM map:
  9. [ 0.000000] memory: 02000000 @ 00000000 (usable)
  10. [ 0.000000] Initrd not found or empty - disabling initrd
  11. [ 0.000000] Zone PFN ranges:
  12. [ 0.000000] Normal 0x00000000 -> 0x00002000
  13. [ 0.000000] Movable zone start PFN for each node
  14. [ 0.000000] Early memory PFN ranges
  15. [ 0.000000] 0: 0x00000000 -> 0x00002000
  16. [ 0.000000] On node 0 totalpages: 8192
  17. [ 0.000000] free_area_init_node: node 0, pgdat 802ef060, node_mem_map 81000000
  18. [ 0.000000] Normal zone: 64 pages used for memmap
  19. [ 0.000000] Normal zone: 0 pages reserved
  20. [ 0.000000] Normal zone: 8128 pages, LIFO batch:0
  21. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  22. [ 0.000000] pcpu-alloc: [0] 0
  23. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  24. [ 0.000000] Kernel command line: board=TL-WR741ND-v4 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
  25. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  26. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  27. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  28. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  29. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  30. [ 0.000000] Writing ErrCtl register=00000000
  31. [ 0.000000] Readback ErrCtl register=00000000
  32. [ 0.000000] Memory: 29008k/32768k available (2209k kernel code, 3760k reserved, 412k data, 212k init, 0k highmem)
  33. [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  34. [ 0.000000] NR_IRQS:51
  35. [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
  36. [ 0.080000] pid_max: default: 32768 minimum: 301
  37. [ 0.080000] Mount-cache hash table entries: 512
  38. [ 0.090000] NET: Registered protocol family 16
  39. [ 0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79
  40. [ 0.100000] MIPS: machine is TP-LINK TL-WR741ND v4
  41. [ 0.520000] bio: create slab <bio-0> at 0
  42. [ 0.530000] Switching to clocksource MIPS
  43. [ 0.530000] NET: Registered protocol family 2
  44. [ 0.540000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  45. [ 0.540000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  46. [ 0.540000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  47. [ 0.550000] TCP: Hash tables configured (established 1024 bind 1024)
  48. [ 0.560000] TCP reno registered
  49. [ 0.560000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  50. [ 0.570000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  51. [ 0.570000] NET: Registered protocol family 1
  52. [ 0.580000] PCI: CLS 0 bytes, default 32
  53. [ 0.600000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  54. [ 0.600000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  55. [ 0.610000] msgmni has been set to 56
  56. [ 0.610000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  57. [ 0.620000] io scheduler noop registered
  58. [ 0.620000] io scheduler deadline registered (default)
  59. [ 0.630000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  60. [ 0.640000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
  61. [ 0.650000] console [ttyATH0] enabled, bootconsole disabled
  62. [ 0.660000] m25p80 spi0.0: found s25sl032a, expected m25p80
  63. [ 0.670000] m25p80 spi0.0: s25sl032a (4096 Kbytes)
  64. [ 0.670000] 5 tp-link partitions found on MTD device spi0.0
  65. [ 0.680000] Creating 5 MTD partitions on "spi0.0":
  66. [ 0.680000] 0x000000000000-0x000000020000 : "u-boot"
  67. [ 0.690000] 0x000000020000-0x00000010989c : "kernel"
  68. [ 0.690000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  69. [ 0.710000] 0x00000010989c-0x0000003f0000 : "rootfs"
  70. [ 0.710000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  71. [ 0.720000] mtd: partition "rootfs" set to be root filesystem
  72. [ 0.730000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, len=110000
  73. [ 0.740000] 0x0000002e0000-0x0000003f0000 : "rootfs_data"
  74. [ 0.740000] 0x0000003f0000-0x000000400000 : "art"
  75. [ 0.750000] 0x000000020000-0x0000003f0000 : "firmware"
  76. [ 0.770000] ag71xx_mdio: probed
  77. [ 0.780000] eth0: Atheros AG71xx at 0xba000000, irq 5
  78. [ 1.330000] eth0: Found an AR7240/AR9330 built-in switch
  79. [ 2.360000] eth1: Atheros AG71xx at 0xb9000000, irq 4
  80. [ 2.910000] ag71xx ag71xx.0: eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
  81. [ 2.920000] TCP cubic registered
  82. [ 2.920000] NET: Registered protocol family 17
  83. [ 2.930000] Bridge firewalling registered
  84. [ 2.930000] 8021q: 802.1Q VLAN Support v1.8
  85. [ 2.940000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  86. [ 2.950000] Freeing unused kernel memory: 212k freed
  87. [ 5.870000] Registered led device: tp-link:green:lan1
  88. [ 5.870000] Registered led device: tp-link:green:lan2
  89. [ 5.870000] Registered led device: tp-link:green:lan3
  90. [ 5.870000] Registered led device: tp-link:green:lan4
  91. [ 5.870000] Registered led device: tp-link:green:qss
  92. [ 5.870000] Registered led device: tp-link:green:system
  93. [ 5.870000] Registered led device: tp-link:green:wan
  94. [ 5.870000] Registered led device: tp-link:green:wlan
  95. [ 6.940000] eth0: link up (1000Mbps/Full duplex)
  96. [ 9.170000] JFFS2 notice: (445) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 12 of xref (0 dead, 2 orphan) found.
  97. [ 9.290000] eth0: link down
  98. [ 10.980000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
  99. [ 10.990000] Backport based on wireless-testing.git master-2012-09-07
  100. [ 11.000000] compat.git: wireless-testing.git
  101. [ 11.030000] cfg80211: Calling CRDA to update world regulatory domain
  102. [ 11.030000] cfg80211: World regulatory domain updated:
  103. [ 11.040000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  104. [ 11.050000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  105. [ 11.050000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  106. [ 11.060000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  107. [ 11.070000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  108. [ 11.080000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  109. [ 11.430000] usbcore: registered new interface driver usbfs
  110. [ 11.430000] usbcore: registered new interface driver hub
  111. [ 11.440000] usbcore: registered new device driver usb
  112. [ 11.990000] ath: EEPROM regdomain: 0x0
  113. [ 11.990000] ath: EEPROM indicates default country code should be used
  114. [ 11.990000] ath: doing EEPROM country->regdmn map search
  115. [ 11.990000] ath: country maps to regdmn code: 0x3a
  116. [ 11.990000] ath: Country alpha2 being used: US
  117. [ 11.990000] ath: Regpair used: 0x3a
  118. [ 12.000000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  119. [ 12.000000] Registered led device: ath9k-phy0
  120. [ 12.000000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
  121. [ 12.010000] cfg80211: Calling CRDA for country: US
  122. [ 12.010000] cfg80211: Regulatory domain changed to country: US
  123. [ 12.010000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  124. [ 12.020000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  125. [ 12.030000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  126. [ 12.040000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  127. [ 12.050000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  128. [ 12.050000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  129. [ 12.060000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  130. [ 12.110000] PPP generic driver version 2.4.2
  131. [ 12.370000] ip_tables: (C) 2000-2006 Netfilter Core Team
  132. [ 12.600000] NET: Registered protocol family 24
  133. [ 12.620000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  134. [ 12.640000] nf_conntrack version 0.5.0 (456 buckets, 1824 max)
  135. [ 12.880000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  136. [ 17.570000] device eth0 entered promiscuous mode
  137. [ 18.370000] eth0: link up (1000Mbps/Full duplex)
  138. [ 18.370000] br-lan: port 1(eth0) entered forwarding state
  139. [ 18.370000] br-lan: port 1(eth0) entered forwarding state
  140. [ 19.860000] cfg80211: Calling CRDA for country: RU
  141. [ 19.860000] cfg80211: Regulatory domain changed to country: RU
  142. [ 19.870000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  143. [ 19.870000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  144. [ 19.880000] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
  145. [ 20.370000] br-lan: port 1(eth0) entered forwarding state
  146. [ 20.970000] eth1: link up (100Mbps/Half duplex)
  147. [ 21.730000] device wlan0 entered promiscuous mode
  148. [ 22.090000] br-lan: port 2(wlan0) entered forwarding state
  149. [ 22.100000] br-lan: port 2(wlan0) entered forwarding state
  150. [ 24.100000] br-lan: port 2(wlan0) entered forwarding state
  151. [ 77.070000] eth1: link down
  152. [ 78.030000] eth1: link up (100Mbps/Half duplex)
  153. [ 2128.010000] ------------[ cut here ]------------
  154. [ 2128.010000] WARNING: at net/sched/sch_generic.c:256 0x802011b0()
  155. [ 2128.010000] NETDEV WATCHDOG: eth1 (ag71xx): transmit queue 0 timed out
  156. [ 2128.020000] Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) compat(O) arc4 aes_generic crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O)
  157. [ 2128.080000] Call Trace:[<80283918>] 0x80283918
  158. [ 2128.080000] [<80283918>] 0x80283918
  159. [ 2128.090000] [<8007198c>] 0x8007198c
  160. [ 2128.090000] [<802011b0>] 0x802011b0
  161. [ 2128.090000] [<80071a40>] 0x80071a40
  162. [ 2128.100000] [<802011b0>] 0x802011b0
  163. [ 2128.100000] [<80201040>] 0x80201040
  164. [ 2128.100000] [<8007c4ac>] 0x8007c4ac
  165. [ 2128.110000] [<80076fb8>] 0x80076fb8
  166. [ 2128.110000] [<800771c8>] 0x800771c8
  167. [ 2128.110000] [<800e6188>] 0x800e6188
  168. [ 2128.120000] [<800773fc>] 0x800773fc
  169. [ 2128.120000] [<8006306c>] 0x8006306c
  170. [ 2128.120000]
  171. [ 2128.130000] ---[ end trace 512fd51e622e6e05 ]---
  172. [ 2128.130000] eth1: tx timeout
  173. [ 2128.130000] eth1: link down
  174. [ 2128.140000] eth1: link up (100Mbps/Half duplex)
  175. [ 2138.010000] eth1: tx timeout
  176. [ 2138.010000] eth1: link down
  177. [ 2138.140000] eth1: link up (100Mbps/Half duplex)
  178. [ 2148.010000] eth1: tx timeout
  179. [ 2148.010000] eth1: link down
  180. [ 2148.140000] eth1: link up (100Mbps/Half duplex)
  181. [ 2158.010000] eth1: tx timeout
  182. [ 2158.010000] eth1: link down
  183. [ 2158.140000] eth1: link up (100Mbps/Half duplex)
  184. [ 2168.010000] eth1: tx timeout
  185. [ 2168.010000] eth1: link down
  186. [ 2168.140000] eth1: link up (100Mbps/Half duplex)
  187. [ 2178.010000] eth1: tx timeout
  188. [ 2178.010000] eth1: link down
  189. [ 2178.140000] eth1: link up (100Mbps/Half duplex)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!