dmesg-3.4.0

Linux version 3.4.0-gentoo (root@Truck) (gcc version 4.6.3 (Gentoo 4.6.3 p1.3, pie-0.5.2) ) #5 SMP Thu Jun 7 23:26:11 CDT 2012
Command line: root=/dev/sda3
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
 BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000020050000 (usable)
 BIOS-e820: 0000000020050000 - 0000000020250000 (reserved)
 BIOS-e820: 0000000020250000 - 0000000040000000 (usable)
 BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
 BIOS-e820: 0000000040200000 - 00000000df40f000 (usable)
 BIOS-e820: 00000000df40f000 - 00000000df58e000 (reserved)
 BIOS-e820: 00000000df58e000 - 00000000df597000 (usable)
 BIOS-e820: 00000000df597000 - 00000000df598000 (reserved)
 BIOS-e820: 00000000df598000 - 00000000df599000 (usable)
 BIOS-e820: 00000000df599000 - 00000000df5b8000 (reserved)
 BIOS-e820: 00000000df5b8000 - 00000000df5c8000 (usable)
 BIOS-e820: 00000000df5c8000 - 00000000df5e8000 (reserved)
 BIOS-e820: 00000000df5e8000 - 00000000df72b000 (usable)
 BIOS-e820: 00000000df72b000 - 00000000df789000 (ACPI NVS)
 BIOS-e820: 00000000df789000 - 00000000df795000 (usable)
 BIOS-e820: 00000000df795000 - 00000000df7e8000 (ACPI NVS)
 BIOS-e820: 00000000df7e8000 - 00000000df7fd000 (usable)
 BIOS-e820: 00000000df7fd000 - 00000000df800000 (ACPI data)
 BIOS-e820: 00000000df800000 - 00000000e0000000 (reserved)
 BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
 BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff980000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 000000021f800000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: ASUSTeK Computer Inc. G74Sx/G74Sx, BIOS G74Sx.202 08/15/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x21f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 0C0000000 mask FE0000000 write-back
  3 base 100000000 mask F00000000 write-back
  4 base 200000000 mask FE0000000 write-back
  5 base 21F800000 mask FFF800000 uncachable
  6 base 0FFC00000 mask FFFC00000 write-protect
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xdf7fd max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009c000] 9c000 size 8192
init_memory_mapping: 0000000000000000-00000000df7fd000
 0000000000 - 00df600000 page 2M
 00df600000 - 00df7fd000 page 4k
kernel direct mapping tables up to df7fd000 @ 1fffa000-20000000
init_memory_mapping: 0000000100000000-000000021f800000
 0100000000 - 021f800000 page 2M
kernel direct mapping tables up to 21f800000 @ df7f3000-df7fd000
ACPI: RSDP 00000000000f0430 00024 (v02 _ASUS_)
ACPI: XSDT 00000000df7fee18 00074 (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
ACPI: FACP 00000000df79ad98 000F4 (v04 _ASUS_ Notebook 06222004 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20120320/tbfadt-378)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDF7E4E40/0x00000000DF7E4D40, using 32 (20120320/tbfadt-502)
ACPI: DSDT 00000000df76b018 10A34 (v01 _ASUS_ Notebook 00000000 INTL 20091112)
ACPI: FACS 00000000df7e4e40 00040
ACPI: APIC 00000000df7fdf18 000CC (v02 _ASUS_ Notebook 06222004 MSFT 00010013)
ACPI: DBGP 00000000df7fff18 00034 (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
ACPI: ECDT 00000000df7e4b18 000C1 (v01 _ASUS_ Notebook 06222004 AMI. 00000003)
ACPI: SLIC 00000000df79be18 00176 (v01 _ASUS_ Notebook 06222004 ASUS 00000001)
ACPI: HPET 00000000df7e5d18 00038 (v01 _ASUS_ Notebook 06222004 AMI. 00000003)
ACPI: MCFG 00000000df7e5c98 0003C (v01 _ASUS_ Notebook 06222004 MSFT 00000097)
ACPI: SSDT 00000000df788018 00955 (v01  PmRef  Cpu0Ist 00003000 INTL 20091112)
ACPI: SSDT 00000000df787018 00996 (v01  PmRef    CpuPm 00003000 INTL 20091112)
ACPI: ASF! 00000000df7e4a18 000A0 (v32 INTEL       HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000021f800000
Initmem setup node 0 0000000000000000-000000021f800000
  NODE_DATA [000000021f7fc000 - 000000021f7fffff]
 [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216e00000-ffff88021edfffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x0021f800
Movable zone start PFN for each node
Early memory PFN ranges
    0: 0x00000010 -> 0x0000009e
    0: 0x00000100 -> 0x00020050
    0: 0x00020250 -> 0x00040000
    0: 0x00040200 -> 0x000df40f
    0: 0x000df58e -> 0x000df597
    0: 0x000df598 -> 0x000df599
    0: 0x000df5b8 -> 0x000df5c8
    0: 0x000df5e8 -> 0x000df72b
    0: 0x000df789 -> 0x000df795
    0: 0x000df7e8 -> 0x000df7fd
    0: 0x00100000 -> 0x0021f800
On node 0 totalpages: 2091291
  DMA zone: 64 pages used for memmap
  DMA zone: 2 pages reserved
  DMA zone: 3916 pages, LIFO batch:0
  DMA32 zone: 16320 pages used for memmap
  DMA32 zone: 893389 pages, LIFO batch:31
  Normal zone: 18400 pages used for memmap
  Normal zone: 1159200 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: NR_CPUS/possible_cpus limit of 4 reached.  Processor 4/0x1 ignored.
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: NR_CPUS/possible_cpus limit of 4 reached.  Processor 5/0x3 ignored.
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: NR_CPUS/possible_cpus limit of 4 reached.  Processor 6/0x5 ignored.
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: NR_CPUS/possible_cpus limit of 4 reached.  Processor 7/0x7 ignored.
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88021f400000 s71808 r8192 d22400 u524288
pcpu-alloc: s71808 r8192 d22400 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2056505
Policy zone: Normal
Kernel command line: root=/dev/sda3
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 8157500k/8904704k available (5569k kernel code, 539540k absent, 207664k reserved, 3026k data, 552k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:712 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2194.901 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.80 BogoMIPS (lpj=2194901)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20120320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
Booting Node   0, Processors  #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (17559.20 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
kworker/u:0 used greatest stack depth: 6616 bytes left
kworker/u:0 used greatest stack depth: 5648 bytes left
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000df5cc698 0063C (v01  PmRef  Cpu0Cst 00003001 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 0063C (v01  PmRef  Cpu0Cst 00003001 INTL 20091112)
ACPI: SSDT 00000000df5cda98 00303 (v01  PmRef    ApIst 00003000 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20091112)
ACPI: SSDT 00000000df5cbd98 00119 (v01  PmRef    ApCst 00003000 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20091112)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf6a0b000-0xf6a0b00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf6a08000-0xf6a083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf6a00000-0xf6a03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf6a07000-0xf6a073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io  0xe070-0xe077]
pci 0000:00:1f.2: reg 14: [io  0xe060-0xe063]
pci 0000:00:1f.2: reg 18: [io  0xe050-0xe057]
pci 0000:00:1f.2: reg 1c: [io  0xe040-0xe043]
pci 0000:00:1f.2: reg 20: [io  0xe020-0xe03f]
pci 0000:00:1f.2: reg 24: [mem 0xf6a06000-0xf6a067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf6a05000-0xf6a050ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0xe000-0xe01f]
pci 0000:01:00.0: [10de:1251] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xf2000000-0xf3ffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xe8000000-0xebffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io  0xd000-0xd07f]
pci 0000:01:00.0: reg 30: [mem 0xf4000000-0xf407ffff pref]
pci 0000:01:00.1: [10de:0bee] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xf4080000-0xf4083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xf2000000-0xf40fffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xebffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf69fffff]
pci 0000:00:1c.0:   bridge window [mem 0xee200000-0xeebfffff 64bit pref]
pci 0000:03:00.0: [8086:0885] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xf5600000-0xf5601fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.1:   bridge window [mem 0xf5600000-0xf5ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xed700000-0xee0fffff 64bit pref]
pci 0000:04:00.0: [1b73:1000] type 00 class 0x0c0330
pci 0000:04:00.0: reg 10: [mem 0xf4c00000-0xf4c0ffff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 04-04]
pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.3:   bridge window [mem 0xf4c00000-0xf55fffff]
pci 0000:00:1c.3:   bridge window [mem 0xecc00000-0xed5fffff 64bit pref]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 10: [io  0x9000-0x90ff]
pci 0000:05:00.0: reg 18: [mem 0xec104000-0xec104fff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xec100000-0xec103fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 05-05]
pci 0000:00:1c.5:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1c.5:   bridge window [mem 0xf4200000-0xf4bfffff]
pci 0000:00:1c.5:   bridge window [mem 0xec100000-0xecafffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 12)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
wmi: Mapper loaded
Advanced Linux Sound Architecture Driver Version 1.0.25.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009e800 - 000000000009ffff
reserve RAM buffer: 0000000020050000 - 0000000023ffffff
reserve RAM buffer: 00000000df40f000 - 00000000dfffffff
reserve RAM buffer: 00000000df597000 - 00000000dfffffff
reserve RAM buffer: 00000000df599000 - 00000000dfffffff
reserve RAM buffer: 00000000df5c8000 - 00000000dfffffff
reserve RAM buffer: 00000000df72b000 - 00000000dfffffff
reserve RAM buffer: 00000000df795000 - 00000000dfffffff
reserve RAM buffer: 00000000df7fd000 - 00000000dfffffff
reserve RAM buffer: 000000021f800000 - 000000021fffffff
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xe0000000-0xfeafffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io  0x0000-0x001f]
pnp 00:01: [io  0x0081-0x0091]
pnp 00:01: [io  0x0093-0x009f]
pnp 00:01: [io  0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xff000000-0xffffffff]
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io  0x00f0]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io  0x002e-0x002f]
pnp 00:05: [io  0x004e-0x004f]
pnp 00:05: [io  0x0061]
pnp 00:05: [io  0x0063]
pnp 00:05: [io  0x0065]
pnp 00:05: [io  0x0067]
pnp 00:05: [io  0x0070]
pnp 00:05: [io  0x0080]
pnp 00:05: [io  0x0092]
pnp 00:05: [io  0x00b2-0x00b3]
pnp 00:05: [io  0x0680-0x069f]
pnp 00:05: [io  0x1000-0x100f]
pnp 00:05: [io  0xffff]
pnp 00:05: [io  0xffff]
pnp 00:05: [io  0x0400-0x0453]
pnp 00:05: [io  0x0458-0x047f]
pnp 00:05: [io  0x0500-0x057f]
pnp 00:05: [io  0x164e-0x164f]
system 00:05: [io  0x0680-0x069f] has been reserved
system 00:05: [io  0x1000-0x100f] has been reserved
system 00:05: [io  0xffff] has been reserved
system 00:05: [io  0xffff] has been reserved
system 00:05: [io  0x0400-0x0453] has been reserved
system 00:05: [io  0x0458-0x047f] has been reserved
system 00:05: [io  0x0500-0x057f] has been reserved
system 00:05: [io  0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io  0x0070-0x0077]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io  0x0454-0x0457]
system 00:07: [io  0x0454-0x0457] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: [io  0x0240-0x0259]
system 00:08: [io  0x0240-0x0259] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs STLc141 PNP0f13 (active)
pnp 00:0a: [io  0x0060]
pnp 00:0a: [io  0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0b: [mem 0xfed10000-0xfed17fff]
pnp 00:0b: [mem 0xfed18000-0xfed18fff]
pnp 00:0b: [mem 0xfed19000-0xfed19fff]
pnp 00:0b: [mem 0xf8000000-0xfbffffff]
pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
pnp 00:0b: [mem 0xfed90000-0xfed93fff]
pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
pnp 00:0b: [mem 0xff000000-0xffffffff]
pnp 00:0b: [mem 0xfee00000-0xfeefffff]
pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] could not be reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xf2000000-0xf40fffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xebffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf69fffff]
pci 0000:00:1c.0:   bridge window [mem 0xee200000-0xeebfffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.1:   bridge window [mem 0xf5600000-0xf5ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xed700000-0xee0fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 04-04]
pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.3:   bridge window [mem 0xf4c00000-0xf55fffff]
pci 0000:00:1c.3:   bridge window [mem 0xecc00000-0xed5fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 05-05]
pci 0000:00:1c.5:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1c.5:   bridge window [mem 0xf4200000-0xf4bfffff]
pci 0000:00:1c.5:   bridge window [mem 0xec100000-0xecafffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf40fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xebffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf69fffff]
pci_bus 0000:02: resource 2 [mem 0xee200000-0xeebfffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xf5600000-0xf5ffffff]
pci_bus 0000:03: resource 2 [mem 0xed700000-0xee0fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xf4c00000-0xf55fffff]
pci_bus 0000:04: resource 2 [mem 0xecc00000-0xed5fffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:05: resource 1 [mem 0xf4200000-0xf4bfffff]
pci_bus 0000:05: resource 2 [mem 0xec100000-0xecafffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:1a.0: EHCI: BIOS handoff
pci 0000:00:1d.0: EHCI: BIOS handoff
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800db40f000 - ffff8800df40f000
software IO TLB at phys 0xdb40f000 - 0xdf40f000
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x15
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x15
microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
NFS: Registering the id_resolver key type
fuse init (API version 7.18)
msgmni has been set to 15932
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using getrawmonotonic().
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC0] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (36 C)
[drm] Initialized drm 1.1.0 20060810
[drm] nouveau 0000:01:00.0: Detected an NVc0 generation card (0x0cf880a1)
ACPI: Battery Slot [BAT0] (battery present)
[drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 70.26.29.00
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:01:00.0: DCB version 4.0
[drm] nouveau 0000:01:00.0: DCB outp 00: 01800323 00010034
[drm] nouveau 0000:01:00.0: DCB outp 01: 02011300 00000000
[drm] nouveau 0000:01:00.0: DCB outp 02: 08022382 00020010
[drm] nouveau 0000:01:00.0: DCB conn 00: 00000040
[drm] nouveau 0000:01:00.0: DCB conn 01: 00000100
[drm] nouveau 0000:01:00.0: DCB conn 02: 00010261
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x6E09
[drm] nouveau 0000:01:00.0: 0x6DF9: i2c rd fail: -6
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x752C
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x8B6B
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x8B75
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x8D4A
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x8DAF
[drm] nouveau 0000:01:00.0: 0x8DAF: Condition still not met after 20ms, skipping following opcodes
[TTM] Zone  kernel: Available graphics memory: 4078760 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] nouveau 0000:01:00.0: Detected 2048MiB VRAM (GDDR5)
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:01:00.0: 0 available performance level(s)
[drm] nouveau 0000:01:00.0: c: core 202MHz shader 405MHz memory 324MHz voltage 970mV
Refined TSC clocksource calibration: 2195.013 MHz.
Switching to clocksource tsc
[drm] nouveau 0000:01:00.0: allocated 1600x900 fb: 0x1c0000, bo ffff880214999c00
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 200x56
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf6a06000 port 0xf6a06100 irq 45
ata2: SATA max UDMA/133 abar m2048@0xf6a06000 port 0xf6a06180 irq 45
ata3: SATA max UDMA/133 abar m2048@0xf6a06000 port 0xf6a06200 irq 45
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: irq 46 for MSI/MSI-X
r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xffffc900057d6000, 54:04:a6:08:6c:60, XID 0c200000 IRQ 46
r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: reset hcs_params 0x203006 dbg=2 cc=3 pcc=0 ordered !ppc ports=6
ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
ehci_hcd 0000:00:1a.0: support lpm
ehci_hcd 0000:00:1a.0: broken D3 during system sleep on ASUS
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1a.0: Enabling legacy PCI PM
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: supports USB remote wakeup
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf6a08000
ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: default language 0x0409
usb usb1: udev 1, busnum 1, minor = 0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.4.0-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: reset hcs_params 0x204008 dbg=2 cc=4 pcc=0 ordered !ppc ports=8
ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
ehci_hcd 0000:00:1d.0: support lpm
ehci_hcd 0000:00:1d.0: broken D3 during system sleep on ASUS
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.0: Enabling legacy PCI PM
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: supports USB remote wakeup
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf6a07000
ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: default language 0x0409
usb usb2: udev 1, busnum 2, minor = 128
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.4.0-gentoo ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 20ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: supports USB remote wakeup
xhci_hcd 0000:04:00.0: irq 19, io mem 0xf4c00000
usb usb3: default language 0x0409
usb usb3: udev 1, busnum 3, minor = 256
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.4.0-gentoo xhci_hcd
usb usb3: SerialNumber: 0000:04:00.0
ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
hub 1-0:1.0: port 1: status 0501 change 0001
ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
hub 2-0:1.0: port 1: status 0501 change 0001
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
usb usb3: adding 3-0:1.0 (config #1, interface 0)
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: individual port power switching
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: Single TT
hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 3-0:1.0: power on to power good time: 20ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: enabling power on all ports
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:04:00.0: supports USB remote wakeup
usb usb4: skipped 1 descriptor after endpoint
usb usb4: default language 0x0409
usb usb4: udev 1, busnum 4, minor = 384
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.4.0-gentoo xhci_hcd
usb usb4: SerialNumber: 0000:04:00.0
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
usb usb4: adding 4-0:1.0 (config #1, interface 0)
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: individual port power switching
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 4-0:1.0: power on to power good time: 20ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: enabling power on all ports
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input3
rtc_cmos 00:06: RTC can wake from S4
rtc (null): alarm rollover: year
rtc_cmos: dev (254:0)
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
ACPI Warning: 0x000000000000e000-0x000000000000e01f SystemIO conflicts with Region \SMB0 1 (20120320/utaddress-251)
ACPI Warning: 0x000000000000e000-0x000000000000e01f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 2 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
cpuidle: using governor ladder
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
hda_intel: Disabling MSI
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
hub 1-0:1.0: state 7 ports 6 chg 0002 evt 0000
hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: WDC WD5000BPKT-80PK4T0, 01.01A01, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ATA-8: WDC WD5000BPKT-80PK4T0, 01.01A01, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ATAPI: SlimtypeDVD A  DS8A5SH, XAA2, max UDMA/100
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BPKT-8 01.0 PQ: 0 ANSI: 5
ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/100
ata2.00: configured for UDMA/133
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000BPKT-8 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM            Slimtype DVD A  DS8A5SH   XAA2 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4096-byte physical blocks
ehci_hcd 0000:00:1a.0: port 1 high speed
ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
usb 1-1: new high-speed USB device number 2 using ehci_hcd
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
 sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
ehci_hcd 0000:00:1a.0: port 1 high speed
ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
ehci_hcd 0000:00:1a.0: LPM: no device attached
usb 1-1: udev 2, busnum 1, minor = 1
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: usb_probe_device
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
hub 1-1:1.0: usb_probe_interface
hub 1-1:1.0: usb_probe_interface - got id
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
hub 1-1:1.0: standalone hub
hub 1-1:1.0: individual port power switching
hub 1-1:1.0: individual port over-current protection
hub 1-1:1.0: Single TT
hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-1:1.0: power on to power good time: 100ms
hub 1-1:1.0: local power source is good
hub 1-1:1.0: enabling power on all ports
hub 2-0:1.0: state 7 ports 8 chg 0002 evt 0000
hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
rtc_cmos 00:06: setting system clock to 2012-06-09 08:21:00 UTC (1339230060)
ALSA device list:
ehci_hcd 0000:00:1d.0: port 1 high speed
ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
  #0: HDA Intel PCH at 0xf6a00000 irq 47
  #1: HDA NVidia at 0xf4080000 irq 17
hub 1-1:1.0: port 1: status 0101 change 0001
hub 1-1:1.0: port 2: status 0101 change 0001
hub 1-1:1.0: port 4: status 0101 change 0001
usb 2-1: new high-speed USB device number 2 using ehci_hcd
ehci_hcd 0000:00:1d.0: port 1 high speed
ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
usb 1-1: link qh256-0001/ffff8802159b4100 start 1 [1/0 us]
ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
ehci_hcd 0000:00:1d.0: LPM: no device attached
usb 2-1: udev 2, busnum 2, minor = 129
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: usb_probe_device
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: adding 2-1:1.0 (config #1, interface 0)
hub 2-1:1.0: usb_probe_interface
hub 2-1:1.0: usb_probe_interface - got id
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
hub 2-1:1.0: standalone hub
hub 2-1:1.0: individual port power switching
hub 2-1:1.0: individual port over-current protection
hub 2-1:1.0: Single TT
hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
hub 2-1:1.0: power on to power good time: 100ms
hub 2-1:1.0: local power source is good
hub 2-1:1.0: enabling power on all ports
hub 3-0:1.0: state 7 ports 1 chg 0000 evt 0000
hub 4-0:1.0: state 7 ports 1 chg 0000 evt 0000
hub 1-1:1.0: state 7 ports 6 chg 0016 evt 0000
hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
hub 1-1:1.0: port 1 not reset yet, waiting 10ms
usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
hub 1-1:1.0: port 1 not reset yet, waiting 10ms
usb 2-1: link qh256-0001/ffff8802159b4000 start 1 [1/0 us]
usb 1-1.1: default language 0x0409
usb 1-1.1: udev 3, busnum 1, minor = 2
usb 1-1.1: New USB device found, idVendor=8087, idProduct=07d6
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: Intel(R) Centrino(R) Wireless-N + WiMAX 6150
usb 1-1.1: Manufacturer: Intel Corporation
usb 1-1.1: usb_probe_device
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
hub 1-1:1.0: port 2 not reset yet, waiting 10ms
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio4/input/input5
usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
hub 1-1:1.0: port 2 not reset yet, waiting 10ms
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda3): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
devtmpfs: mounted
Freeing unused kernel memory: 552k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 556k freed
Freeing unused kernel memory: 308k freed
usb 1-1.2: skipped 1 descriptor after configuration
usb 1-1.2: skipped 5 descriptors after interface
usb 1-1.2: skipped 1 descriptor after endpoint
usb 1-1.2: skipped 19 descriptors after interface
usb 1-1.2: default language 0x0409
usb 1-1.2: udev 4, busnum 1, minor = 3
usb 1-1.2: New USB device found, idVendor=13d3, idProduct=5134
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: USB2.0 UVC 1M WebCam
usb 1-1.2: Manufacturer: USB2.0 UVC 1M WebCam
usb 1-1.2: usb_probe_device
usb 1-1.2: configuration #1 chosen from 1 choice
usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1)
hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
usb 1-1.4: new high-speed USB device number 5 using ehci_hcd
hub 1-1:1.0: port 4 not reset yet, waiting 10ms
usb 1-1.4: default language 0x0409
usb 1-1.4: udev 5, busnum 1, minor = 4
usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0139
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: USB2.0-CRW
usb 1-1.4: Manufacturer: Generic
usb 1-1.4: SerialNumber: 20100201396000000
usb 1-1.4: usb_probe_device
usb 1-1.4: configuration #1 chosen from 1 choice
usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0002
hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0000
loadkeys used greatest stack depth: 3984 bytes left
init-early.sh used greatest stack depth: 3696 bytes left
udevd[1056]: starting version 182
cfg80211: Calling CRDA to update world regulatory domain
Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057dc000
iwlwifi 0000:03:00.0: HW Revision ID = 0x67
iwlwifi 0000:03:00.0: irq 48 for MSI/MSI-X
iwlwifi 0000:03:00.0: loaded firmware version 41.28.5.1 build 33926
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN, REV=0x84
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: device EEPROM VER=0x557, CALIB=0x6
iwlwifi 0000:03:00.0: Device SKU: 0x150
iwlwifi 0000:03:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
Registered led device: phy0-led
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
vboxdrv: Found 4 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa00eef00
vboxdrv: fAsync=0 offMin=0x462 offMax=0x388c
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.16 (interface 0x00190000).
EXT3-fs (sda3): using internal journal
Adding 1048572k swap on /dev/sda2.  Priority:-1 extents:1 across:1048572k
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdb1): using internal journal
EXT3-fs (sdb1): mounted filesystem with writeback data mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdb2): using internal journal
EXT3-fs (sdb2): mounted filesystem with writeback data mode
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
ieee80211 phy0: device now idle
ieee80211 phy0: device no longer idle - scanning
ieee80211 phy0: device now idle
ieee80211 phy0: device no longer idle - scanning
ieee80211 phy0: device now idle
ieee80211 phy0: device no longer idle - scanning
ieee80211 phy0: device now idle
wlan0: authenticate with 00:12:17:30:f9:3e
ieee80211 phy0: Allocated STA 00:12:17:30:f9:3e
ieee80211 phy0: device no longer idle - in use
ieee80211 phy0: Inserted STA 00:12:17:30:f9:3e
wlan0: send auth to 00:12:17:30:f9:3e (try 1/3)
wlan0: authenticated
wlan0: moving STA 00:12:17:30:f9:3e to state 2
wlan0: associate with 00:12:17:30:f9:3e (try 1/3)
wlan0: RX AssocResp from 00:12:17:30:f9:3e (capab=0x411 status=0 aid=5)
wlan0: associated
wlan0: moving STA 00:12:17:30:f9:3e to state 3
wlan0: moving STA 00:12:17:30:f9:3e to state 4
wlan0: deauthenticating from 00:12:17:30:f9:3e by local choice (reason=3)
wlan0: moving STA 00:12:17:30:f9:3e to state 3
wlan0: moving STA 00:12:17:30:f9:3e to state 2
wlan0: moving STA 00:12:17:30:f9:3e to state 1
ieee80211 phy0: Removed STA 00:12:17:30:f9:3e
ieee80211 phy0: Destroyed STA 00:12:17:30:f9:3e
ieee80211 phy0: device now idle
cfg80211: Calling CRDA to update world regulatory domain
[drm] nouveau 0000:01:00.0: PMFB0_SUBP0: 0x037f0040
[drm] nouveau 0000:01:00.0: PMFB0_SUBP1: 0x037f0040
kworker/u:0 used greatest stack depth: 3464 bytes left