Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-33-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #70-Ubuntu SMP Thu Jul 7 21:09:46 UTC 2011 (Ubuntu 2.6.32-33.70-generic 2.6.32.41+drm33.18)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
- [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000ded39000 (usable)
- [ 0.000000] BIOS-e820: 00000000ded39000 - 00000000ded8f000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000ded8f000 - 00000000df359000 (reserved)
- [ 0.000000] BIOS-e820: 00000000df359000 - 00000000df35c000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000df35c000 - 00000000df5a2000 (reserved)
- [ 0.000000] BIOS-e820: 00000000df5a2000 - 00000000df5b3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000df5b3000 - 00000000df5ca000 (reserved)
- [ 0.000000] BIOS-e820: 00000000df5ca000 - 00000000df5cc000 (usable)
- [ 0.000000] BIOS-e820: 00000000df5cc000 - 00000000df5d3000 (reserved)
- [ 0.000000] BIOS-e820: 00000000df5d3000 - 00000000df5de000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000df5de000 - 00000000df63b000 (reserved)
- [ 0.000000] BIOS-e820: 00000000df63b000 - 00000000df67e000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000df67e000 - 00000000df800000 (usable)
- [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 000000021f800000 (usable)
- [ 0.000000] DMI 2.6 present.
- [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0xdf800 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CFFFF write-protect
- [ 0.000000] D0000-E7FFF uncachable
- [ 0.000000] E8000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask E00000000 write-back
- [ 0.000000] 1 base 200000000 mask FE0000000 write-back
- [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
- [ 0.000000] 3 base 21F800000 mask FFF800000 uncachable
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] 8 disabled
- [ 0.000000] 9 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] Scanning 0 areas for low memory corruption
- [ 0.000000] modified physical RAM map:
- [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
- [ 0.000000] modified: 0000000000010000 - 000000000009d800 (usable)
- [ 0.000000] modified: 000000000009d800 - 00000000000a0000 (reserved)
- [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] modified: 0000000000100000 - 00000000ded39000 (usable)
- [ 0.000000] modified: 00000000ded39000 - 00000000ded8f000 (ACPI NVS)
- [ 0.000000] modified: 00000000ded8f000 - 00000000df359000 (reserved)
- [ 0.000000] modified: 00000000df359000 - 00000000df35c000 (ACPI NVS)
- [ 0.000000] modified: 00000000df35c000 - 00000000df5a2000 (reserved)
- [ 0.000000] modified: 00000000df5a2000 - 00000000df5b3000 (ACPI NVS)
- [ 0.000000] modified: 00000000df5b3000 - 00000000df5ca000 (reserved)
- [ 0.000000] modified: 00000000df5ca000 - 00000000df5cc000 (usable)
- [ 0.000000] modified: 00000000df5cc000 - 00000000df5d3000 (reserved)
- [ 0.000000] modified: 00000000df5d3000 - 00000000df5de000 (ACPI NVS)
- [ 0.000000] modified: 00000000df5de000 - 00000000df63b000 (reserved)
- [ 0.000000] modified: 00000000df63b000 - 00000000df67e000 (ACPI NVS)
- [ 0.000000] modified: 00000000df67e000 - 00000000df800000 (usable)
- [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
- [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
- [ 0.000000] modified: 0000000100000000 - 000000021f800000 (usable)
- [ 0.000000] initial memory mapped : 0 - 00c00000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
- [ 0.000000] Using x86 segment limits to approximate NX protection
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037400000 page 2M
- [ 0.000000] 0037400000 - 00377fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
- [ 0.000000] RAMDISK: 7f703000 - 7fffe3e4
- [ 0.000000] Allocated new RAMDISK: 008e5000 - 011e03e4
- [ 0.000000] Move RAMDISK from 000000007f703000 - 000000007fffe3e3 to 008e5000 - 011e03e3
- [ 0.000000] ACPI: RSDP 000f0420 00024 (v02 ALASKA)
- [ 0.000000] ACPI: XSDT ded84068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: FACP ded8dec0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: DSDT ded84140 09D7B (v02 ALASKA A M I 00000000 INTL 20051117)
- [ 0.000000] ACPI: FACS df5d5f80 00040
- [ 0.000000] ACPI: APIC ded8dfb8 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: SSDT ded8e030 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
- [ 0.000000] ACPI: MCFG ded8e138 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
- [ 0.000000] ACPI: HPET ded8e178 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 2688MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] node 0 low ram: 00000000 - 377fe000
- [ 0.000000] node 0 bootmap 00011000 - 00017f00
- [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- [ 0.000000] #3 [0000100000 - 00008e0ef8] TEXT DATA BSS ==> [0000100000 - 00008e0ef8]
- [ 0.000000] #4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000]
- [ 0.000000] #5 [00008e1000 - 00008e421e] BRK ==> [00008e1000 - 00008e421e]
- [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
- [ 0.000000] #7 [00008e5000 - 00011e03e4] NEW RAMDISK ==> [00008e5000 - 00011e03e4]
- [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
- [ 0.000000] found SMP MP-table at [c00fcda0] fcda0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000377fe
- [ 0.000000] HighMem 0x000377fe -> 0x000df800
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[4] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009d
- [ 0.000000] 0: 0x00000100 -> 0x000ded39
- [ 0.000000] 0: 0x000df5ca -> 0x000df5cc
- [ 0.000000] 0: 0x000df67e -> 0x000df800
- [ 0.000000] On node 0 totalpages: 912970
- [ 0.000000] free_area_init_node: node 0, pgdat c079a7c0, node_mem_map c11e2200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3949 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 5377 pages used for memmap
- [ 0.000000] HighMem zone: 680382 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
- [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 24
- [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
- [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at df800000 (gap: df800000:1f51c000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s36312 r0 d21032 u1048576
- [ 0.000000] pcpu-alloc: s36312 r0 d21032 u1048576 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 905817
- [ 0.000000] Kernel command line: initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- BOOT_IMAGE=/casper/vmlinuz
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
- [ 0.000000] allocated 18308800 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (000377fe:000df800)
- [ 0.000000] Memory: 3585808k/3661824k available (4675k kernel code, 64884k reserved, 2127k data, 668k init, 2743036k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc07a5000 - 0xc084c000 ( 668 kB)
- [ 0.000000] .data : 0xc0590dc7 - 0xc07a4d88 (2127 kB)
- [ 0.000000] .text : 0xc0100000 - 0xc0590dc7 (4675 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:2304 nr_irqs:440
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.004000] Detected 3310.558 MHz processor.
- [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6621.11 BogoMIPS (lpj=13242232)
- [ 0.000010] Security Framework initialized
- [ 0.000019] AppArmor: AppArmor initialized
- [ 0.000023] Mount-cache hash table entries: 512
- [ 0.000079] Initializing cgroup subsys ns
- [ 0.000081] Initializing cgroup subsys cpuacct
- [ 0.000083] Initializing cgroup subsys memory
- [ 0.000086] Initializing cgroup subsys devices
- [ 0.000088] Initializing cgroup subsys freezer
- [ 0.000089] Initializing cgroup subsys net_cls
- [ 0.000100] CPU: Physical Processor ID: 0
- [ 0.000101] CPU: Processor Core ID: 0
- [ 0.000103] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.000105] CPU: L2 cache: 256K
- [ 0.000105] CPU: L3 cache: 6144K
- [ 0.000108] mce: CPU supports 9 MCE banks
- [ 0.000117] CPU0: Thermal monitoring enabled (TM1)
- [ 0.000119] CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8
- [ 0.000127] using mwait in idle threads.
- [ 0.000130] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
- [ 0.000133] ... version: 3
- [ 0.000134] ... bit width: 48
- [ 0.000135] ... generic registers: 8
- [ 0.000136] ... value mask: 0000ffffffffffff
- [ 0.000137] ... max period: 000000007fffffff
- [ 0.000138] ... fixed-purpose events: 3
- [ 0.000139] ... event mask: 00000007000000ff
- [ 0.000142] Checking 'hlt' instruction... OK.
- [ 0.014264] ACPI: Core revision 20090903
- [ 0.234610] ftrace: converting mcount calls to 0f 1f 44 00 00
- [ 0.234612] ftrace: allocating 21725 entries in 43 pages
- [ 0.240427] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.240758] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.280401] CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz stepping 07
- [ 0.388076] Booting processor 1 APIC 0x2 ip 0x6000
- [ 0.398342] Initializing CPU#1
- [ 0.475935] CPU: Physical Processor ID: 0
- [ 0.475936] CPU: Processor Core ID: 1
- [ 0.475938] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.475939] CPU: L2 cache: 256K
- [ 0.475940] CPU: L3 cache: 6144K
- [ 0.475950] CPU1: Thermal monitoring enabled (TM1)
- [ 0.475952] CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
- [ 0.476016] CPU1: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz stepping 07
- [ 0.476021] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- [ 0.496054] Booting processor 2 APIC 0x4 ip 0x6000
- [ 0.506162] Initializing CPU#2
- [ 0.583830] CPU: Physical Processor ID: 0
- [ 0.583831] CPU: Processor Core ID: 2
- [ 0.583833] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.583834] CPU: L2 cache: 256K
- [ 0.583834] CPU: L3 cache: 6144K
- [ 0.583845] CPU2: Thermal monitoring enabled (TM1)
- [ 0.583847] CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
- [ 0.583894] CPU2: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz stepping 07
- [ 0.583899] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
- [ 0.603931] Booting processor 3 APIC 0x6 ip 0x6000
- [ 0.614039] Initializing CPU#3
- [ 0.691726] CPU: Physical Processor ID: 0
- [ 0.691726] CPU: Processor Core ID: 3
- [ 0.691728] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.691729] CPU: L2 cache: 256K
- [ 0.691730] CPU: L3 cache: 6144K
- [ 0.691741] CPU3: Thermal monitoring enabled (TM1)
- [ 0.691742] CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
- [ 0.691771] CPU3: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz stepping 07
- [ 0.691776] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
- [ 0.711768] Brought up 4 CPUs
- [ 0.711770] Total of 4 processors activated (26485.38 BogoMIPS).
- [ 0.713399] CPU0 attaching sched-domain:
- [ 0.713402] domain 0: span 0-3 level MC
- [ 0.713403] groups: 0 1 2 3
- [ 0.713407] CPU1 attaching sched-domain:
- [ 0.713408] domain 0: span 0-3 level MC
- [ 0.713410] groups: 1 2 3 0
- [ 0.713412] CPU2 attaching sched-domain:
- [ 0.713413] domain 0: span 0-3 level MC
- [ 0.713414] groups: 2 3 0 1
- [ 0.713417] CPU3 attaching sched-domain:
- [ 0.713418] domain 0: span 0-3 level MC
- [ 0.713419] groups: 3 0 1 2
- [ 0.713550] devtmpfs: initialized
- [ 0.713724] regulator: core version 0.5
- [ 0.713747] Time: 0:03:37 Date: 02/14/12
- [ 0.713768] NET: Registered protocol family 16
- [ 0.713820] Trying to unpack rootfs image as initramfs...
- [ 0.713824] EISA bus registered
- [ 0.713828] ACPI: bus type pci registered
- [ 0.713864] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
- [ 0.713866] PCI: Not using MMCONFIG.
- [ 0.726163] PCI: Using configuration type 1 for base access
- [ 0.726183] mtrr: your CPUs had inconsistent fixed MTRR settings
- [ 0.726184] mtrr: probably your BIOS does not setup all CPUs.
- [ 0.726184] mtrr: corrected configuration.
- [ 0.726631] bio: create slab <bio-0> at 0
- [ 0.727256] ACPI: EC: Look up EC in DSDT
- [ 0.727821] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.729841] ACPI Error (psargs-0359): [RAMB] Namespace lookup failure, AE_NOT_FOUND
- [ 0.729845] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20090903/nsinit-338)
- [ 0.731078] ACPI: Interpreter enabled
- [ 0.731081] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.731093] ACPI: Using IOAPIC for interrupt routing
- [ 0.731124] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
- [ 0.731219] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
- [ 0.731220] PCI: Using MMCONFIG for extended config space
- [ 0.731370] ACPI: BIOS _OSI(Linux) query ignored
- [ 0.735376] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
- [ 0.735516] ACPI: No dock devices found.
- [ 0.735745] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.735804] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.735806] pci 0000:00:01.0: PME# disabled
- [ 0.735868] pci 0000:00:16.0: reg 10 64bit mmio: [0xfb429000-0xfb42900f]
- [ 0.735911] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.735914] pci 0000:00:16.0: PME# disabled
- [ 0.735959] pci 0000:00:19.0: reg 10 32bit mmio: [0xfb400000-0xfb41ffff]
- [ 0.735964] pci 0000:00:19.0: reg 14 32bit mmio: [0xfb428000-0xfb428fff]
- [ 0.735970] pci 0000:00:19.0: reg 18 io port: [0xf040-0xf05f]
- [ 0.736004] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
- [ 0.736008] pci 0000:00:19.0: PME# disabled
- [ 0.736052] pci 0000:00:1a.0: reg 10 32bit mmio: [0xfb427000-0xfb4273ff]
- [ 0.736102] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.736106] pci 0000:00:1a.0: PME# disabled
- [ 0.736142] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfb420000-0xfb423fff]
- [ 0.736179] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.736183] pci 0000:00:1b.0: PME# disabled
- [ 0.736245] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.736248] pci 0000:00:1c.0: PME# disabled
- [ 0.736315] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- [ 0.736318] pci 0000:00:1c.4: PME# disabled
- [ 0.736383] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 0.736386] pci 0000:00:1c.5: PME# disabled
- [ 0.736451] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
- [ 0.736454] pci 0000:00:1c.6: PME# disabled
- [ 0.736503] pci 0000:00:1d.0: reg 10 32bit mmio: [0xfb426000-0xfb4263ff]
- [ 0.736552] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.736556] pci 0000:00:1d.0: PME# disabled
- [ 0.736683] pci 0000:00:1f.2: reg 10 io port: [0xf090-0xf097]
- [ 0.736688] pci 0000:00:1f.2: reg 14 io port: [0xf080-0xf083]
- [ 0.736692] pci 0000:00:1f.2: reg 18 io port: [0xf070-0xf077]
- [ 0.736697] pci 0000:00:1f.2: reg 1c io port: [0xf060-0xf063]
- [ 0.736702] pci 0000:00:1f.2: reg 20 io port: [0xf020-0xf03f]
- [ 0.736707] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfb425000-0xfb4257ff]
- [ 0.736734] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.736737] pci 0000:00:1f.2: PME# disabled
- [ 0.736762] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb424000-0xfb4240ff]
- [ 0.736774] pci 0000:00:1f.3: reg 20 io port: [0x1180-0x119f]
- [ 0.736811] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
- [ 0.736817] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xf0000000-0xf7ffffff]
- [ 0.736824] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xf8000000-0xf9ffffff]
- [ 0.736827] pci 0000:01:00.0: reg 24 io port: [0xe000-0xe07f]
- [ 0.736831] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfb000000-0xfb07ffff]
- [ 0.736875] pci 0000:01:00.1: reg 10 32bit mmio: [0xfb080000-0xfb083fff]
- [ 0.736926] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
- [ 0.736928] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfb0fffff]
- [ 0.736930] pci 0000:00:01.0: bridge 64bit mmio pref: [0xf0000000-0xf9ffffff]
- [ 0.737039] pci 0000:03:00.0: reg 10 64bit mmio: [0xfb300000-0xfb307fff]
- [ 0.737131] pci 0000:03:00.0: PME# supported from D3hot D3cold
- [ 0.737137] pci 0000:03:00.0: PME# disabled
- [ 0.737189] pci 0000:00:1c.4: bridge 32bit mmio: [0xfb300000-0xfb3fffff]
- [ 0.737263] pci 0000:04:00.0: reg 10 64bit mmio: [0xfb200000-0xfb207fff]
- [ 0.737356] pci 0000:04:00.0: PME# supported from D3hot D3cold
- [ 0.737361] pci 0000:04:00.0: PME# disabled
- [ 0.737413] pci 0000:00:1c.5: bridge 32bit mmio: [0xfb200000-0xfb2fffff]
- [ 0.737479] pci 0000:05:00.0: reg 10 io port: [0xd040-0xd047]
- [ 0.737489] pci 0000:05:00.0: reg 14 io port: [0xd030-0xd033]
- [ 0.737499] pci 0000:05:00.0: reg 18 io port: [0xd020-0xd027]
- [ 0.737508] pci 0000:05:00.0: reg 1c io port: [0xd010-0xd013]
- [ 0.737518] pci 0000:05:00.0: reg 20 io port: [0xd000-0xd00f]
- [ 0.737528] pci 0000:05:00.0: reg 24 32bit mmio: [0xfb110000-0xfb1101ff]
- [ 0.737537] pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
- [ 0.737574] pci 0000:05:00.0: PME# supported from D3hot
- [ 0.737579] pci 0000:05:00.0: PME# disabled
- [ 0.737623] pci 0000:00:1c.6: bridge io port: [0xd000-0xdfff]
- [ 0.737627] pci 0000:00:1c.6: bridge 32bit mmio: [0xfb100000-0xfb1fffff]
- [ 0.737651] pci_bus 0000:00: on NUMA node 0
- [ 0.737653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.737752] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.737788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
- [ 0.737821] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
- [ 0.737854] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
- [ 0.737903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
- [ 0.740673] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.740744] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.740812] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
- [ 0.740880] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.740947] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12 14 15)
- [ 0.741015] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.741083] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
- [ 0.741150] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
- [ 0.741211] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.741213] vgaarb: loaded
- [ 0.741268] SCSI subsystem initialized
- [ 0.741316] libata version 3.00 loaded.
- [ 0.741349] usbcore: registered new interface driver usbfs
- [ 0.741355] usbcore: registered new interface driver hub
- [ 0.741369] usbcore: registered new device driver usb
- [ 0.741435] ACPI: WMI: Mapper loaded
- [ 0.741436] PCI: Using ACPI for IRQ routing
- [ 0.741542] NetLabel: Initializing
- [ 0.741543] NetLabel: domain hash size = 128
- [ 0.741544] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.741550] NetLabel: unlabeled traffic allowed by default
- [ 0.741572] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.741576] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.743587] Switching to clocksource tsc
- [ 1.894909] AppArmor: AppArmor Filesystem Enabled
- [ 1.894919] pnp: PnP ACPI init
- [ 1.894928] ACPI: bus type pnp registered
- [ 1.896133] pnp: PnP ACPI: found 11 devices
- [ 1.896134] ACPI: ACPI bus type pnp unregistered
- [ 1.896136] PnPBIOS: Disabled by ACPI PNP
- [ 1.896145] system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved
- [ 1.896147] system 00:01: iomem range 0xe0000000-0xe3ffffff has been reserved
- [ 1.896148] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
- [ 1.896150] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
- [ 1.896151] system 00:01: iomem range 0xfee00000-0xfee0ffff has been reserved
- [ 1.896155] system 00:02: ioport range 0x290-0x29f has been reserved
- [ 1.896159] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
- [ 1.896162] system 00:08: ioport range 0x400-0x453 has been reserved
- [ 1.896163] system 00:08: ioport range 0x458-0x47f has been reserved
- [ 1.896165] system 00:08: ioport range 0x1180-0x119f has been reserved
- [ 1.896166] system 00:08: ioport range 0x500-0x57f has been reserved
- [ 1.896168] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
- [ 1.896170] system 00:08: iomem range 0xfec00000-0xfecfffff could not be reserved
- [ 1.896171] system 00:08: iomem range 0xfed08000-0xfed08fff has been reserved
- [ 1.896173] system 00:08: iomem range 0xff000000-0xffffffff has been reserved
- [ 1.896176] system 00:09: ioport range 0x454-0x457 has been reserved
- [ 1.909908] Freeing initrd memory: 9196k freed
- [ 1.930771] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
- [ 1.930773] pci 0000:00:01.0: IO window: 0xe000-0xefff
- [ 1.930775] pci 0000:00:01.0: MEM window: 0xfa000000-0xfb0fffff
- [ 1.930777] pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f9ffffff
- [ 1.930780] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
- [ 1.930780] pci 0000:00:1c.0: IO window: disabled
- [ 1.930785] pci 0000:00:1c.0: MEM window: disabled
- [ 1.930788] pci 0000:00:1c.0: PREFETCH window: disabled
- [ 1.930794] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
- [ 1.930795] pci 0000:00:1c.4: IO window: disabled
- [ 1.930799] pci 0000:00:1c.4: MEM window: 0xfb300000-0xfb3fffff
- [ 1.930803] pci 0000:00:1c.4: PREFETCH window: disabled
- [ 1.930808] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
- [ 1.930809] pci 0000:00:1c.5: IO window: disabled
- [ 1.930813] pci 0000:00:1c.5: MEM window: 0xfb200000-0xfb2fffff
- [ 1.930817] pci 0000:00:1c.5: PREFETCH window: disabled
- [ 1.930823] pci 0000:00:1c.6: PCI bridge, secondary bus 0000:05
- [ 1.930825] pci 0000:00:1c.6: IO window: 0xd000-0xdfff
- [ 1.930829] pci 0000:00:1c.6: MEM window: 0xfb100000-0xfb1fffff
- [ 1.930833] pci 0000:00:1c.6: PREFETCH window: 0xe4000000-0xe40fffff
- [ 1.930844] alloc irq_desc for 16 on node -1
- [ 1.930846] alloc kstat_irqs on node -1
- [ 1.930849] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.930852] pci 0000:00:01.0: setting latency timer to 64
- [ 1.930858] alloc irq_desc for 17 on node -1
- [ 1.930859] alloc kstat_irqs on node -1
- [ 1.930861] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 1.930865] pci 0000:00:1c.0: setting latency timer to 64
- [ 1.930872] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 1.930876] pci 0000:00:1c.4: setting latency timer to 64
- [ 1.930883] alloc irq_desc for 19 on node -1
- [ 1.930884] alloc kstat_irqs on node -1
- [ 1.930886] pci 0000:00:1c.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.930889] pci 0000:00:1c.5: setting latency timer to 64
- [ 1.930897] alloc irq_desc for 18 on node -1
- [ 1.930898] alloc kstat_irqs on node -1
- [ 1.930899] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 1.930903] pci 0000:00:1c.6: setting latency timer to 64
- [ 1.930907] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 1.930908] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- [ 1.930909] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
- [ 1.930911] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfb0fffff]
- [ 1.930912] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf9ffffff]
- [ 1.930913] pci_bus 0000:03: resource 1 mem: [0xfb300000-0xfb3fffff]
- [ 1.930915] pci_bus 0000:04: resource 1 mem: [0xfb200000-0xfb2fffff]
- [ 1.930916] pci_bus 0000:05: resource 0 io: [0xd000-0xdfff]
- [ 1.930917] pci_bus 0000:05: resource 1 mem: [0xfb100000-0xfb1fffff]
- [ 1.930919] pci_bus 0000:05: resource 2 pref mem [0xe4000000-0xe40fffff]
- [ 1.930938] NET: Registered protocol family 2
- [ 1.930984] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 1.931097] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 1.931247] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 1.931317] TCP: Hash tables configured (established 131072 bind 65536)
- [ 1.931319] TCP reno registered
- [ 1.931349] NET: Registered protocol family 1
- [ 2.185542] pci 0000:01:00.0: Boot video device
- [ 2.185737] cpufreq-nforce2: No nForce2 chipset.
- [ 2.185750] Scanning for low memory corruption every 60 seconds
- [ 2.185797] audit: initializing netlink socket (disabled)
- [ 2.185801] type=2000 audit(1329177817.824:1): initialized
- [ 2.190887] highmem bounce pool size: 64 pages
- [ 2.190890] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 2.191608] VFS: Disk quotas dquot_6.5.2
- [ 2.191634] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 2.191896] fuse init (API version 7.13)
- [ 2.191935] msgmni has been set to 1666
- [ 2.192056] alg: No test for stdrng (krng)
- [ 2.192081] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 2.192083] io scheduler noop registered
- [ 2.192084] io scheduler anticipatory registered
- [ 2.192085] io scheduler deadline registered
- [ 2.192102] io scheduler cfq registered (default)
- [ 2.192166] alloc irq_desc for 24 on node -1
- [ 2.192167] alloc kstat_irqs on node -1
- [ 2.192171] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
- [ 2.192174] pcieport 0000:00:01.0: setting latency timer to 64
- [ 2.192246] alloc irq_desc for 25 on node -1
- [ 2.192246] alloc kstat_irqs on node -1
- [ 2.192252] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
- [ 2.192260] pcieport 0000:00:1c.0: setting latency timer to 64
- [ 2.192347] alloc irq_desc for 26 on node -1
- [ 2.192348] alloc kstat_irqs on node -1
- [ 2.192354] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
- [ 2.192361] pcieport 0000:00:1c.4: setting latency timer to 64
- [ 2.192448] alloc irq_desc for 27 on node -1
- [ 2.192449] alloc kstat_irqs on node -1
- [ 2.192454] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
- [ 2.192462] pcieport 0000:00:1c.5: setting latency timer to 64
- [ 2.192548] alloc irq_desc for 28 on node -1
- [ 2.192549] alloc kstat_irqs on node -1
- [ 2.192555] pcieport 0000:00:1c.6: irq 28 for MSI/MSI-X
- [ 2.192562] pcieport 0000:00:1c.6: setting latency timer to 64
- [ 2.192613] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 2.192625] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 2.192675] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 2.192680] ACPI: Power Button [PWRB]
- [ 2.192702] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 2.192703] ACPI: Power Button [PWRF]
- [ 2.193100] ACPI: SSDT df5d4918 003E0 (v01 AMI IST 00000001 MSFT 03000001)
- [ 2.193312] ACPI: SSDT df5d3d98 00120 (v01 AMI CST 00000001 MSFT 03000001)
- [ 2.193640] Monitor-Mwait will be used to enter C-1 state
- [ 2.193661] Monitor-Mwait will be used to enter C-2 state
- [ 2.193676] Monitor-Mwait will be used to enter C-3 state
- [ 2.193708] processor LNXCPU:00: registered as cooling_device0
- [ 2.194066] processor LNXCPU:01: registered as cooling_device1
- [ 2.194420] processor LNXCPU:02: registered as cooling_device2
- [ 2.194770] processor LNXCPU:03: registered as cooling_device3
- [ 2.195942] isapnp: Scanning for PnP cards...
- [ 2.196564] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 2.197209] brd: module loaded
- [ 2.197430] loop: module loaded
- [ 2.197468] input: Macintosh mouse button emulation as /devices/virtual/input/input2
- [ 2.197653] Fixed MDIO Bus: probed
- [ 2.197668] PPP generic driver version 2.4.2
- [ 2.197685] tun: Universal TUN/TAP device driver, 1.6
- [ 2.197686] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 2.197718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.197730] alloc irq_desc for 23 on node -1
- [ 2.197731] alloc kstat_irqs on node -1
- [ 2.197733] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 2.197740] ehci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 2.197743] ehci_hcd 0000:00:1a.0: EHCI Host Controller
- [ 2.197758] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 2.197779] ehci_hcd 0000:00:1a.0: debug port 2
- [ 2.201671] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
- [ 2.201681] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfb427000
- [ 2.217481] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 2.217527] usb usb1: configuration #1 chosen from 1 choice
- [ 2.217541] hub 1-0:1.0: USB hub found
- [ 2.217544] hub 1-0:1.0: 2 ports detected
- [ 2.217571] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 2.217578] ehci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 2.217580] ehci_hcd 0000:00:1d.0: EHCI Host Controller
- [ 2.217594] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 2.217614] ehci_hcd 0000:00:1d.0: debug port 2
- [ 2.221489] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
- [ 2.221492] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfb426000
- [ 2.237461] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 2.237500] usb usb2: configuration #1 chosen from 1 choice
- [ 2.237512] hub 2-0:1.0: USB hub found
- [ 2.237514] hub 2-0:1.0: 2 ports detected
- [ 2.237538] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.237544] uhci_hcd: USB Universal Host Controller Interface driver
- [ 2.237580] PNP: No PS/2 controller found. Probing ports directly.
- [ 2.240126] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 2.240129] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 2.240170] mice: PS/2 mouse device common for all mice
- [ 2.240224] rtc_cmos 00:04: RTC can wake from S4
- [ 2.240241] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- [ 2.240265] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 2.240310] device-mapper: uevent: version 1.0.3
- [ 2.240351] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
- [ 2.240402] device-mapper: multipath: version 1.1.0 loaded
- [ 2.240403] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 2.240453] EISA: Probing bus 0 at eisa.0
- [ 2.240474] EISA: Detected 0 cards.
- [ 2.240610] cpuidle: using governor ladder
- [ 2.240714] cpuidle: using governor menu
- [ 2.240878] TCP cubic registered
- [ 2.240948] NET: Registered protocol family 10
- [ 2.241263] NET: Registered protocol family 17
- [ 2.241741] Using IPI No-Shortcut mode
- [ 2.241770] PM: Resume from disk failed.
- [ 2.241774] registered taskstats version 1
- [ 2.242113] Magic number: 0:535:51
- [ 2.242167] rtc_cmos 00:04: setting system clock to 2012-02-14 00:03:38 UTC (1329177818)
- [ 2.242168] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 2.242169] EDD information not available.
- [ 2.529673] usb 1-1: new high speed USB device using ehci_hcd and address 2
- [ 2.548888] isapnp: No Plug & Play device found
- [ 2.548932] Freeing unused kernel memory: 668k freed
- [ 2.549064] Write protecting the kernel text: 4676k
- [ 2.549097] Write protecting the kernel read-only data: 1848k
- [ 2.559194] udev: starting version 151
- [ 2.572080] Linux agpgart interface v0.103
- [ 2.573843] ahci 0000:00:1f.2: version 3.0
- [ 2.573856] alloc irq_desc for 20 on node -1
- [ 2.573857] alloc kstat_irqs on node -1
- [ 2.573861] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
- [ 2.573885] alloc irq_desc for 29 on node -1
- [ 2.573886] alloc kstat_irqs on node -1
- [ 2.573892] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
- [ 2.586181] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
- [ 2.586183] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
- [ 2.586187] ahci 0000:00:1f.2: setting latency timer to 64
- [ 2.586936] [drm] Initialized drm 1.1.0 20060810
- [ 2.599734] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 2.599737] nouveau 0000:01:00.0: setting latency timer to 64
- [ 2.600480] [drm] nouveau 0000:01:00.0: Unsupported chipset 0x0c8300a1
- [ 2.600524] nouveau 0000:01:00.0: PCI INT A disabled
- [ 2.600526] nouveau: probe of 0000:01:00.0 failed with error -22
- [ 2.601276] vga16fb: initializing
- [ 2.601277] vga16fb: mapped to 0xc00a0000
- [ 2.601296] fb0: VGA16 VGA frame buffer device
- [ 2.602140] scsi0 : ahci
- [ 2.602223] scsi1 : ahci
- [ 2.602258] scsi2 : ahci
- [ 2.602291] scsi3 : ahci
- [ 2.602327] scsi4 : ahci
- [ 2.602357] scsi5 : ahci
- [ 2.602443] ata1: SATA max UDMA/133 abar m2048@0xfb425000 port 0xfb425100 irq 29
- [ 2.602446] ata2: SATA max UDMA/133 abar m2048@0xfb425000 port 0xfb425180 irq 29
- [ 2.602448] ata3: SATA max UDMA/133 abar m2048@0xfb425000 port 0xfb425200 irq 29
- [ 2.602449] ata4: DUMMY
- [ 2.602450] ata5: DUMMY
- [ 2.602450] ata6: DUMMY
- [ 2.602476] ahci 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 2.602563] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
- [ 2.602564] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
- [ 2.602570] ahci 0000:05:00.0: setting latency timer to 64
- [ 2.602637] scsi6 : ahci
- [ 2.602683] scsi7 : ahci
- [ 2.602722] ata7: SATA max UDMA/133 abar m512@0xfb110000 port 0xfb110100 irq 18
- [ 2.602726] ata8: SATA max UDMA/133 abar m512@0xfb110000 port 0xfb110180 irq 18
- [ 2.665501] usb 1-1: configuration #1 chosen from 1 choice
- [ 2.665655] hub 1-1:1.0: USB hub found
- [ 2.665811] hub 1-1:1.0: 6 ports detected
- [ 2.776946] usb 2-1: new high speed USB device using ehci_hcd and address 2
- [ 2.909264] usb 2-1: configuration #1 chosen from 1 choice
- [ 2.909419] hub 2-1:1.0: USB hub found
- [ 2.909580] hub 2-1:1.0: 8 ports detected
- [ 2.922299] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 2.922331] ata8: SATA link down (SStatus 0 SControl 300)
- [ 2.922550] ata3.00: ATAPI: ATAPI DVD A DH16A6L, ZH37, max UDMA/100
- [ 2.923487] ata3.00: configured for UDMA/100
- [ 2.924795] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 2.925813] ata7: SATA link down (SStatus 0 SControl 300)
- [ 2.926648] ata2.00: ATA-8: Hitachi HDS723030ALA640, MKAOA5C0, max UDMA/133
- [ 2.926650] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 2.928595] ata2.00: configured for UDMA/133
- [ 2.932787] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 2.944719] ata1.00: ATA-8: OCZ-VERTEX3 MI, 2.15, max UDMA/133
- [ 2.944720] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 2.954682] ata1.00: configured for UDMA/133
- [ 2.972851] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 MI 2.15 PQ: 0 ANSI: 5
- [ 2.972917] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 2.972974] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
- [ 2.972994] sd 0:0:0:0: [sda] Write Protect is off
- [ 2.972996] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.973006] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.973025] scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72303 MKAO PQ: 0 ANSI: 5
- [ 2.973067] sda:
- [ 2.973089] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 2.973100] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
- [ 2.973129] sd 1:0:0:0: [sdb] Write Protect is off
- [ 2.973130] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 2.973188] sda1 sda2 sda3 <
- [ 2.973291] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.973300] sda5 sda6 sda7
- [ 2.973594] sdb: sda8 >
- [ 2.973795] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 2.974132] scsi 2:0:0:0: CD-ROM ATAPI DVD A DH16A6L ZH37 PQ: 0 ANSI: 5
- [ 2.979373] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 2.979383] Uniform CD-ROM driver Revision: 3.20
- [ 2.979422] sr 2:0:0:0: Attached scsi CD-ROM sr0
- [ 2.979442] sr 2:0:0:0: Attached scsi generic sg2 type 5
- [ 3.019259] sdb1 sdb2 sdb3 sdb4
- [ 3.019719] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 3.184584] usb 2-1.3: new full speed USB device using ehci_hcd and address 3
- [ 3.279001] usb 2-1.3: configuration #1 chosen from 1 choice
- [ 3.281592] Console: switching to colour frame buffer device 80x30
- [ 3.284179] usbcore: registered new interface driver hiddev
- [ 3.291274] input: Razer Razer Mamba as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input3
- [ 3.291311] generic-usb 0003:1532:0024.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer Mamba] on usb-0000:00:1d.0-1.3/input0
- [ 3.292430] input: Razer Razer Mamba as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input4
- [ 3.292499] generic-usb 0003:1532:0024.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Mamba] on usb-0000:00:1d.0-1.3/input1
- [ 3.292507] usbcore: registered new interface driver usbhid
- [ 3.292508] usbhid: v2.6:USB HID core driver
- [ 3.348597] usb 2-1.4: new full speed USB device using ehci_hcd and address 4
- [ 3.447100] usb 2-1.4: configuration #1 chosen from 1 choice
- [ 3.448147] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5
- [ 3.448237] generic-usb 0003:1532:010D.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate] on usb-0000:00:1d.0-1.4/input0
- [ 3.449349] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/input/input6
- [ 3.449388] generic-usb 0003:1532:010D.0004: input,hidraw3: USB HID v1.11 Device [Razer Razer BlackWidow Ultimate] on usb-0000:00:1d.0-1.4/input1
- [ 3.451080] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.2/input/input7
- [ 3.451117] generic-usb 0003:1532:010D.0005: input,hidraw4: USB HID v1.11 Mouse [Razer Razer BlackWidow Ultimate] on usb-0000:00:1d.0-1.4/input2
- [ 3.521013] xor: automatically using best checksumming function: pIII_sse
- [ 3.521263] usb 2-1.8: new high speed USB device using ehci_hcd and address 5
- [ 3.540637] pIII_sse : 16731.000 MB/sec
- [ 3.540638] xor: using function: pIII_sse (16731.000 MB/sec)
- [ 3.541786] device-mapper: dm-raid45: initialized v0.2594b
- [ 3.628143] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
- [ 3.628145] EXT4-fs (sda2): write access will be enabled during recovery
- [ 3.639780] EXT4-fs (sda2): recovery complete
- [ 3.639844] EXT4-fs (sda2): mounted filesystem with ordered data mode
- [ 3.665027] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
- [ 3.665029] EXT4-fs (sda5): write access will be enabled during recovery
- [ 3.671852] EXT4-fs (sda5): recovery complete
- [ 3.671939] EXT4-fs (sda5): mounted filesystem with ordered data mode
- [ 3.695116] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
- [ 3.695118] EXT4-fs (sda6): write access will be enabled during recovery
- [ 3.735943] EXT4-fs (sda6): recovery complete
- [ 3.736008] EXT4-fs (sda6): mounted filesystem with ordered data mode
- [ 3.759620] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
- [ 3.759622] EXT4-fs (sda7): write access will be enabled during recovery
- [ 3.760282] EXT4-fs (sda7): recovery complete
- [ 3.760322] EXT4-fs (sda7): mounted filesystem with ordered data mode
- [ 3.783717] EXT4-fs (sda8): INFO: recovery required on readonly filesystem
- [ 3.783720] EXT4-fs (sda8): write access will be enabled during recovery
- [ 3.784377] EXT4-fs (sda8): recovery complete
- [ 3.784436] EXT4-fs (sda8): mounted filesystem with ordered data mode
- [ 3.802401] usb 2-1.8: configuration #1 chosen from 1 choice
- [ 3.805756] Initializing USB Mass Storage driver...
- [ 3.805868] scsi8 : SCSI emulation for USB Mass Storage devices
- [ 3.805941] usb-storage: device found at 5
- [ 3.805943] usb-storage: waiting for device to settle before scanning
- [ 3.805947] usbcore: registered new interface driver usb-storage
- [ 3.805948] USB Mass Storage support registered.
- [ 4.022393] EXT4-fs (sdb2): INFO: recovery required on readonly filesystem
- [ 4.022395] EXT4-fs (sdb2): write access will be enabled during recovery
- [ 4.061342] EXT4-fs (sdb2): recovery complete
- [ 4.061885] EXT4-fs (sdb2): mounted filesystem with ordered data mode
- [ 8.799404] usb-storage: device scan complete
- [ 8.916820] scsi 8:0:0:0: Direct-Access silicon-power 1100 PQ: 0 ANSI: 0 CCS
- [ 8.917369] sd 8:0:0:0: Attached scsi generic sg3 type 0
- [ 8.918043] sd 8:0:0:0: [sdc] 3962880 512-byte logical blocks: (2.02 GB/1.88 GiB)
- [ 8.918650] sd 8:0:0:0: [sdc] Write Protect is off
- [ 8.918652] sd 8:0:0:0: [sdc] Mode Sense: 43 00 00 00
- [ 8.918653] sd 8:0:0:0: [sdc] Assuming drive cache: write through
- [ 8.920764] sd 8:0:0:0: [sdc] Assuming drive cache: write through
- [ 8.920766] sdc: sdc1
- [ 8.922992] sd 8:0:0:0: [sdc] Assuming drive cache: write through
- [ 8.922994] sd 8:0:0:0: [sdc] Attached SCSI removable disk
- [ 9.624781] aufs 2-standalone.tree-20091207
- [ 9.632026] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 15.312431] Adding 16385016k swap on /dev/sdb4. Priority:-1 extents:1 across:16385016k
- [ 15.437736] udev: starting version 151
- [ 15.639143] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 15.639157] xhci_hcd 0000:03:00.0: setting latency timer to 64
- [ 15.639160] xhci_hcd 0000:03:00.0: xHCI Host Controller
- [ 15.639192] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
- [ 15.700262] xhci_hcd 0000:03:00.0: irq 16, io mem 0xfb300000
- [ 15.700304] usb usb3: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
- [ 15.700358] usb usb3: configuration #1 chosen from 1 choice
- [ 15.700360] xHCI xhci_add_endpoint called for root hub
- [ 15.700361] xHCI xhci_check_bandwidth called for root hub
- [ 15.700375] hub 3-0:1.0: USB hub found
- [ 15.700379] hub 3-0:1.0: 4 ports detected
- [ 15.700429] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 15.700445] xhci_hcd 0000:04:00.0: setting latency timer to 64
- [ 15.700448] xhci_hcd 0000:04:00.0: xHCI Host Controller
- [ 15.700470] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
- [ 15.761536] xhci_hcd 0000:04:00.0: irq 17, io mem 0xfb200000
- [ 15.761575] usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
- [ 15.761624] usb usb4: configuration #1 chosen from 1 choice
- [ 15.761626] xHCI xhci_add_endpoint called for root hub
- [ 15.761627] xHCI xhci_check_bandwidth called for root hub
- [ 15.761641] hub 4-0:1.0: USB hub found
- [ 15.761644] hub 4-0:1.0: 4 ports detected
- [ 15.821683] alloc irq_desc for 22 on node -1
- [ 15.821684] alloc kstat_irqs on node -1
- [ 15.821688] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 15.821708] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 15.907145] hda_codec: ALC889: BIOS auto-probing.
- [ 15.908548] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
- [ 15.979217] lp: driver loaded but no devices found
- [ 16.002035] ppdev: user-space parallel port driver
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement