API tools faq
paste
Guest User

smartctl

a guest
Feb 12th, 2016
272
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.04 KB | None | 0 0
raw download clone embed print report
  1. smartctl -a /dev/sdc
  2. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.19.0-49-generic] (local build)
  3. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Toshiba 3.5" HDD DT01ACA...
  7. Device Model: TOSHIBA DT01ACA200
  8. Serial Number: 84F6WP9GS
  9. LU WWN Device Id: 5 000039 ffad139aa
  10. Firmware Version: MX4OABB0
  11. User Capacity: 2.000.398.934.016 bytes [2,00 TB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Rotation Rate: 7200 rpm
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ATA8-ACS T13/1699-D revision 4
  16. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  17. Local Time is: Fri Feb 12 18:18:58 2016 CET
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x85) Offline data collection activity
  26. was aborted by an interrupting command from host.
  27. Auto Offline Data Collection: Enabled.
  28. Self-test execution status: ( 249) Self-test routine in progress...
  29. 90% of test remaining.
  30. Total time to complete Offline
  31. data collection: (14631) seconds.
  32. Offline data collection
  33. capabilities: (0x5b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. No Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 1) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 244) minutes.
  50. SCT capabilities: (0x003d) SCT Status supported.
  51. SCT Error Recovery Control supported.
  52. SCT Feature Control supported.
  53. SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 16
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  58. 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
  59. 2 Throughput_Performance 0x0005 139 139 054 Pre-fail Offline - 72
  60. 3 Spin_Up_Time 0x0007 130 130 024 Pre-fail Always - 286 (Average 298)
  61. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 87
  62. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
  63. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  64. 8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
  65. 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 135
  66. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  67. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 87
  68. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 87
  69. 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 87
  70. 194 Temperature_Celsius 0x0002 187 187 000 Old_age Always - 32 (Min/Max 18/36)
  71. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  72. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  73. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  74. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 6
  75.  
  76. SMART Error Log Version: 1
  77. ATA Error Count: 6 (device log contains only the most recent five errors)
  78. CR = Command Register [HEX]
  79. FR = Features Register [HEX]
  80. SC = Sector Count Register [HEX]
  81. SN = Sector Number Register [HEX]
  82. CL = Cylinder Low Register [HEX]
  83. CH = Cylinder High Register [HEX]
  84. DH = Device/Head Register [HEX]
  85. DC = Device Command Register [HEX]
  86. ER = Error register [HEX]
  87. ST = Status register [HEX]
  88. Powered_Up_Time is measured from power on, and printed as
  89. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  90. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  91.  
  92. Error 6 occurred at disk power-on lifetime: 128 hours (5 days + 8 hours)
  93. When the command that caused the error occurred, the device was active or idle.
  94.  
  95. After command completion occurred, registers were:
  96. ER ST SC SN CL CH DH
  97. -- -- -- -- -- -- --
  98. 84 51 10 20 44 02 01 Error: ICRC, ABRT at LBA = 0x01024420 = 16925728
  99.  
  100. Commands leading to the command that caused the error were:
  101. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  102. -- -- -- -- -- -- -- -- ---------------- --------------------
  103. 61 18 18 c8 c8 fe 40 08 02:55:21.107 WRITE FPDMA QUEUED
  104. 61 08 10 f8 d3 f7 40 08 02:55:21.090 WRITE FPDMA QUEUED
  105. 61 08 08 e8 bf f7 40 08 02:55:21.090 WRITE FPDMA QUEUED
  106. 61 08 00 f8 1e f7 40 08 02:55:21.087 WRITE FPDMA QUEUED
  107. 61 20 f0 a8 1d 03 40 08 02:55:21.084 WRITE FPDMA QUEUED
  108.  
  109. Error 5 occurred at disk power-on lifetime: 128 hours (5 days + 8 hours)
  110. When the command that caused the error occurred, the device was active or idle.
  111.  
  112. After command completion occurred, registers were:
  113. ER ST SC SN CL CH DH
  114. -- -- -- -- -- -- --
  115. 84 51 a0 b8 06 04 01 Error: ICRC, ABRT at LBA = 0x010406b8 = 17041080
  116.  
  117. Commands leading to the command that caused the error were:
  118. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  119. -- -- -- -- -- -- -- -- ---------------- --------------------
  120. 61 30 68 f8 fe 04 40 08 02:55:19.671 WRITE FPDMA QUEUED
  121. 61 28 60 d0 f9 04 40 08 02:55:19.671 WRITE FPDMA QUEUED
  122. 61 d0 58 00 ef 04 40 08 02:55:19.667 WRITE FPDMA QUEUED
  123. 61 00 50 00 e6 04 40 08 02:55:19.666 WRITE FPDMA QUEUED
  124. 61 58 48 a8 dd 04 40 08 02:55:19.665 WRITE FPDMA QUEUED
  125.  
  126. Error 4 occurred at disk power-on lifetime: 128 hours (5 days + 8 hours)
  127. When the command that caused the error occurred, the device was active or idle.
  128.  
  129. After command completion occurred, registers were:
  130. ER ST SC SN CL CH DH
  131. -- -- -- -- -- -- --
  132. 84 51 c0 c0 0e f3 0d Error: ICRC, ABRT at LBA = 0x0df30ec0 = 234032832
  133.  
  134. Commands leading to the command that caused the error were:
  135. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  136. -- -- -- -- -- -- -- -- ---------------- --------------------
  137. 61 08 b0 f8 1a f7 40 08 02:55:18.311 WRITE FPDMA QUEUED
  138. 61 08 a8 98 82 f6 40 08 02:55:18.311 WRITE FPDMA QUEUED
  139. 61 08 a0 f8 1f f3 40 08 02:55:18.311 WRITE FPDMA QUEUED
  140. 61 08 98 f8 1f ef 40 08 02:55:18.311 WRITE FPDMA QUEUED
  141. 61 40 90 c0 19 f3 40 08 02:55:18.311 WRITE FPDMA QUEUED
  142.  
  143. Error 3 occurred at disk power-on lifetime: 128 hours (5 days + 8 hours)
  144. When the command that caused the error occurred, the device was active or idle.
  145.  
  146. After command completion occurred, registers were:
  147. ER ST SC SN CL CH DH
  148. -- -- -- -- -- -- --
  149. 84 51 80 10 aa 01 01 Error: ICRC, ABRT at LBA = 0x0101aa10 = 16886288
  150.  
  151. Commands leading to the command that caused the error were:
  152. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  153. -- -- -- -- -- -- -- -- ---------------- --------------------
  154. 61 40 18 98 74 03 40 08 02:55:16.913 WRITE FPDMA QUEUED
  155. 61 d0 10 c8 6e 03 40 08 02:55:16.907 WRITE FPDMA QUEUED
  156. 61 40 08 88 69 03 40 08 02:55:16.904 WRITE FPDMA QUEUED
  157. 61 40 00 48 64 03 40 08 02:55:16.897 WRITE FPDMA QUEUED
  158. 61 90 f0 b8 5d 03 40 08 02:55:16.892 WRITE FPDMA QUEUED
  159.  
  160. Error 2 occurred at disk power-on lifetime: 127 hours (5 days + 7 hours)
  161. When the command that caused the error occurred, the device was active or idle.
  162.  
  163. After command completion occurred, registers were:
  164. ER ST SC SN CL CH DH
  165. -- -- -- -- -- -- --
  166. 84 51 b8 00 15 7b 0c Error: ICRC, ABRT at LBA = 0x0c7b1500 = 209392896
  167.  
  168. Commands leading to the command that caused the error were:
  169. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  170. -- -- -- -- -- -- -- -- ---------------- --------------------
  171. 61 b8 d8 00 f0 7a 40 08 02:07:27.485 WRITE FPDMA QUEUED
  172. 61 98 d0 00 f4 7a 40 08 02:07:27.485 WRITE FPDMA QUEUED
  173. 61 f0 c8 00 f6 7a 40 08 02:07:27.485 WRITE FPDMA QUEUED
  174. 61 60 c0 00 f8 7a 40 08 02:07:27.485 WRITE FPDMA QUEUED
  175. 61 38 b8 00 fc 7a 40 08 02:07:27.485 WRITE FPDMA QUEUED
  176.  
  177. SMART Self-test log structure revision number 1
  178. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  179. # 1 Short offline Completed without error 00% 134 -
  180.  
  181. SMART Selective self-test log data structure revision number 1
  182. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  183. 1 0 0 Not_testing
  184. 2 0 0 Not_testing
  185. 3 0 0 Not_testing
  186. 4 0 0 Not_testing
  187. 5 0 0 Not_testing
  188. Selective self-test flags (0x0):
  189. After scanning selected spans, do NOT read-scan remainder of disk.
  190. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!