Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Copyright (c) 1992-2016 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 11.0-CURRENT #0 r299112: Thu May 5 14:56:41 EEST 2016
- mitya@test@cabletv.dp.ua:/usr/src/sys/amd64/compile/test amd64
- FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
- VT(vga): resolution 640x480
- CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (2400.13-MHz K8-class CPU)
- Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
- AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
- AMD Features2=0x1<LAHF>
- VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
- TSC: P-state invariant, performance statistics
- real memory = 34359738368 (32768 MB)
- avail memory = 33292230656 (31749 MB)
- Event timer "LAPIC" quality 600
- ACPI APIC Table: <HP ProLiant>
- FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
- FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
- random: unblocking device.
- ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20160422/tbfadt-733)
- ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20160422/tbfadt-733)
- ioapic1 <Version 2.0> irqs 24-47 on motherboard
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- random: entropy device external interface
- kbd1 at kbdmux0
- module_register_init: MOD_LOAD (vesa, 0xffffffff80f330f0, 0) error 19
- netmap: loaded module
- vtvga0: <VT VGA driver> on motherboard
- cryptosoft0: <software crypto> on motherboard
- acpi0: <HP ProLiant> on motherboard
- acpi0: Power Button (fixed)
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- cpu2: <ACPI CPU> on acpi0
- cpu3: <ACPI CPU> on acpi0
- cpu4: <ACPI CPU> on acpi0
- cpu5: <ACPI CPU> on acpi0
- cpu6: <ACPI CPU> on acpi0
- cpu7: <ACPI CPU> on acpi0
- attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Event timer "HPET" frequency 14318180 Hz quality 350
- Event timer "HPET1" frequency 14318180 Hz quality 340
- Event timer "HPET2" frequency 14318180 Hz quality 340
- Event timer "HPET3" frequency 14318180 Hz quality 340
- atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
- Event timer "RTC" frequency 32768 Hz quality 0
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
- pcib0: <ACPI Host-PCI bridge> on acpi0
- pci0: <ACPI PCI bus> on pcib0
- pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- ciss0: <HP Smart Array P410i> port 0x4000-0x40ff mem 0xfbc00000-0xfbffffff,0xfbbf0000-0xfbbf0fff irq 28 at device 0.0 on pci1
- ciss0: PERFORMANT Transport
- pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
- pci2: <ACPI PCI bus> on pcib2
- pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0
- pci3: <ACPI PCI bus> on pcib3
- pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
- pci4: <ACPI PCI bus> on pcib4
- pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
- pci5: <ACPI PCI bus> on pcib5
- pcib6: <ACPI PCI-PCI bridge> at device 6.0 on pci0
- pci6: <ACPI PCI bus> on pcib6
- pcib7: <ACPI PCI-PCI bridge> at device 7.0 on pci0
- pci7: <ACPI PCI bus> on pcib7
- bce0: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf4000000-0xf5ffffff irq 30 at device 0.0 on pci7
- miibus0: <MII bus> on bce0
- brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0
- brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
- bce0: Using defaults for TSO: 65518/35/2048
- bce0: Ethernet address: 68:b5:99:c8:17:20
- bce0: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.6)
- Coal (RX:6,6,18,18; TX:20,20,80,80)
- bce1: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf2000000-0xf3ffffff irq 37 at device 0.1 on pci7
- miibus1: <MII bus> on bce1
- brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1
- brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
- bce1: Using defaults for TSO: 65518/35/2048
- bce1: Ethernet address: 68:b5:99:c8:17:22
- bce1: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.6)
- Coal (RX:6,6,18,18; TX:20,20,80,80)
- pcib8: <ACPI PCI-PCI bridge> at device 8.0 on pci0
- pci8: <ACPI PCI bus> on pcib8
- bce2: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf8000000-0xf9ffffff irq 31 at device 0.0 on pci8
- miibus2: <MII bus> on bce2
- brgphy2: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus2
- brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
- bce2: Using defaults for TSO: 65518/35/2048
- bce2: Ethernet address: 68:b5:99:c8:17:28
- bce2: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.6)
- Coal (RX:6,6,18,18; TX:20,20,80,80)
- bce3: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf6000000-0xf7ffffff irq 39 at device 0.1 on pci8
- miibus3: <MII bus> on bce3
- brgphy3: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus3
- brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
- bce3: Using defaults for TSO: 65518/35/2048
- bce3: Ethernet address: 68:b5:99:c8:17:2a
- bce3: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.6)
- Coal (RX:6,6,18,18; TX:20,20,80,80)
- pcib9: <ACPI PCI-PCI bridge> at device 9.0 on pci0
- pci9: <ACPI PCI bus> on pcib9
- pcib10: <ACPI PCI-PCI bridge> at device 10.0 on pci0
- pci10: <ACPI PCI bus> on pcib10
- pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
- pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
- pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
- pcib11: <ACPI PCI-PCI bridge> at device 28.0 on pci0
- pci11: <ACPI PCI bus> on pcib11
- pcib12: <ACPI PCI-PCI bridge> at device 28.4 on pci0
- pci12: <ACPI PCI bus> on pcib12
- uhci0: <HP iLO Standard Virtual USB controller> port 0x3c00-0x3c1f irq 17 at device 0.4 on pci12
- usbus0 on uhci0
- uhci1: <Intel 82801JI (ICH10) USB controller USB-A> port 0x1000-0x101f irq 20 at device 29.0 on pci0
- usbus1 on uhci1
- uhci2: <Intel 82801JI (ICH10) USB controller USB-B> port 0x1020-0x103f irq 23 at device 29.1 on pci0
- usbus2 on uhci2
- uhci3: <Intel 82801JI (ICH10) USB controller USB-C> port 0x1040-0x105f irq 22 at device 29.2 on pci0
- usbus3 on uhci3
- uhci4: <Intel 82801JI (ICH10) USB controller USB-F> port 0x1060-0x107f irq 23 at device 29.3 on pci0
- usbus4 on uhci4
- ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xf1bf0000-0xf1bf03ff irq 20 at device 29.7 on pci0
- usbus5: EHCI version 1.0
- usbus5 on ehci0
- pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0
- pci13: <ACPI PCI bus> on pcib13
- vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xe8000000-0xefffffff,0xf1cf0000-0xf1cfffff irq 23 at device 3.0 on pci13
- vgapci0: Boot video device
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- atapci0: <Intel ICH10 SATA300 controller> port 0x1080-0x1087,0x1088-0x108b,0x1090-0x1097,0x1098-0x109b,0x10a0-0x10af,0x10b0-0x10bf irq 17 at device 31.2 on pci0
- ata2: <ATA channel> at channel 0 on atapci0
- ata3: <ATA channel> at channel 1 on atapci0
- acpi_tz0: <Thermal Zone> on acpi0
- ipmi0: <IPMI System Interface> port 0xca2-0xca3 on acpi0
- ipmi0: KCS mode found at io 0xca2 on acpi
- atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- qpi0: <QPI system bus> on motherboard
- orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
- ppc0: cannot reserve I/O port range
- uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0
- coretemp0: <CPU On-Die Thermal Sensors> on cpu0
- est0: <Enhanced SpeedStep Frequency Control> on cpu0
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 13
- device_attach: est0 attach returned 6
- coretemp1: <CPU On-Die Thermal Sensors> on cpu1
- est1: <Enhanced SpeedStep Frequency Control> on cpu1
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 13
- device_attach: est1 attach returned 6
- coretemp2: <CPU On-Die Thermal Sensors> on cpu2
- est2: <Enhanced SpeedStep Frequency Control> on cpu2
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 13
- device_attach: est2 attach returned 6
- coretemp3: <CPU On-Die Thermal Sensors> on cpu3
- est3: <Enhanced SpeedStep Frequency Control> on cpu3
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 13
- device_attach: est3 attach returned 6
- coretemp4: <CPU On-Die Thermal Sensors> on cpu4
- est4: <Enhanced SpeedStep Frequency Control> on cpu4
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 13
- device_attach: est4 attach returned 6
- coretemp5: <CPU On-Die Thermal Sensors> on cpu5
- est5: <Enhanced SpeedStep Frequency Control> on cpu5
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 13
- device_attach: est5 attach returned 6
- coretemp6: <CPU On-Die Thermal Sensors> on cpu6
- est6: <Enhanced SpeedStep Frequency Control> on cpu6
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 13
- device_attach: est6 attach returned 6
- coretemp7: <CPU On-Die Thermal Sensors> on cpu7
- est7: <Enhanced SpeedStep Frequency Control> on cpu7
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 13
- device_attach: est7 attach returned 6
- bce0: link state changed to DOWN
- bce1: link state changed to DOWN
- bce2: link state changed to DOWN
- bce3: link state changed to DOWN
- usbus0: 12Mbps Full Speed USB v1.0
- Timecounters tick every 1.000 msec
- ipmi0: IPMI device rev. 1, firmware rev. 1.15, version 2.0
- ipmi0: Number of channels 0
- ipmi0: Attached watchdog
- usbus1: 12Mbps Full Speed USB v1.0
- usbus2: 12Mbps Full Speed USB v1.0
- ugen0.1: <HP> at usbus0
- uhub0: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
- ugen1.1: <Intel> at usbus1
- uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
- ugen2.1: <Intel> at usbus2
- uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
- usbus3: 12Mbps Full Speed USB v1.0
- usbus4: 12Mbps Full Speed USB v1.0
- usbus5: 480Mbps High Speed USB v2.0
- ugen3.1: <Intel> at usbus3
- uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
- ugen4.1: <Intel> at usbus4
- uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
- ugen5.1: <Intel> at usbus5
- uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
- uhub0: 2 ports with 2 removable, self powered
- uhub1: 2 ports with 2 removable, self powered
- uhub2: 2 ports with 2 removable, self powered
- uhub3: 2 ports with 2 removable, self powered
- uhub4: 2 ports with 2 removable, self powered
- ugen0.2: <HP> at usbus0
- ukbd0: <Virtual Keyboard > on usbus0
- kbd2 at ukbd0
- uhub5: 8 ports with 8 removable, self powered
- ugen5.2: <vendor 0x058f> at usbus5
- umass0: <vendor 0x058f Mass Storage Device, class 0/0, rev 2.00/1.05, addr 2> on usbus5
- umass0: SCSI over Bulk-Only; quirks = 0x4001
- umass0:4:0: Attached to scbus4
- ugen5.3: <UFD 2.0> at usbus5
- umass1: <UFD 2.0 Silicon-Power16G, class 0/0, rev 2.00/1.00, addr 3> on usbus5
- umass1: SCSI over Bulk-Only; quirks = 0x8100
- umass1:5:1: Attached to scbus5
- ugen3.2: <vendor 0x1241> at usbus3
- ukbd1: <vendor 0x1241 USB Keyboard, class 0/0, rev 1.10/2.80, addr 2> on usbus3
- kbd3 at ukbd1
- run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
- da1 at ciss0 bus 0 scbus0 target 1 lun 0
- da0 at ciss0 bus 0 scbus0 target 0 lun 0
- da1: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device
- da1: Serial Number 5001438011758ED0
- da1: 135.168MB/s transfers
- da1: Command Queueing enabled
- da1: 139979MB (286677120 512 byte sectors)
- da0: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device
- da0: Serial Number 5001438011758ED0
- da0: 135.168MB/s transfers
- da0: Command Queueing enabled
- da0: 139979MB (286677120 512 byte sectors)
- da2 at ciss0 bus 0 scbus0 target 2 lun 0
- da2: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device
- da2: Serial Number 5001438011758ED0
- da2: 135.168MB/s transfers
- da2: Command Queueing enabled
- da2: 114439MB (234371520 512 byte sectors)
- da4 at umass-sim1 bus 1 scbus5 target 0 lun 0
- da4: <UFD 2.0 Silicon-Power16G PMAP> Removable Direct Access SPC-2 SCSI device
- da4: Serial Number P1502009000E60053F25B066784
- da4: 40.000MB/s transfers
- da4: 14818MB (30349056 512 byte sectors)
- da4: quirks=0x2<NO_6_BYTE>
- SMP: AP CPU #1 Launched!
- SMP: AP CPU #2 Launched!
- SMP: AP CPU #7 Launched!
- SMP: AP CPU #3 Launched!
- SMP: AP CPU #4 Launched!
- SMP: AP CPU #6 Launched!
- SMP: AP CPU #5 Launched!
- cd0 at ata2 bus 0 scbus2 target 0 lun 0
- cd0: <hp DVD RW AD-7586H KP03> Removable CD-ROM SCSI device
- cd0: Serial Number SCA4102174
- cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
- cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
- Timecounter "TSC-low" frequency 1200066589 Hz quality 1000
- GEOM_PART: integrity check failed (da0, MBR)
- da3 at umass-sim0 bus 0 scbus4 target 0 lun 0
- da3: <Single Flash Reader 1.00> Removable Direct Access SCSI device
- da3: Serial Number 058F63356336
- da3: 40.000MB/s transfers
- da3: 15120MB (30965760 512 byte sectors)
- da3: quirks=0x2<NO_6_BYTE>
- GEOM_PART: integrity check failed (da1, MBR)
- GEOM_PART: integrity check failed (diskid/DISK-5001438011758ED0, MBR)
- Loader variables:
- Manual root filesystem specification:
- <fstype>:<device> [options]
- Mount <device> using filesystem <fstype>
- and with the specified (optional) option list.
- eg. ufs:/dev/da0s1a
- zfs:tank
- cd9660:/dev/cd0 ro
- (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
- ? List valid disk boot devices
- . Yield 1 second (for background tasks)
- <empty line> Abort manual input
- mountroot> Trying to mount root from ufs:/dev/da3p2 []...
- ZFS filesystem version: 5
- ZFS storage pool version: features support (5000)
- bce0: Gigabit link up!
- bce0: link state changed to UP
- bce0: Gigabit link up!
- bce0: Gigabit link up!
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement