API tools faq
paste
Advertisement
skeggsc

Untitled

skeggsc
Jul 1st, 2016
206
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 19.50 KB | None | 0 0
raw download clone embed print report
  1. ******************************
  2. PSH KERNEL VERSION: b0182b2b
  3. WR: 20104000
  4. ******************************
  5.  
  6. SCU IPC: 0x800000d0 0xfffce92c
  7.  
  8. PSH miaHOB version: TNG.B0.VVBD.0000000c
  9.  
  10. microkernel built 11:24:08 Feb 5 2015
  11.  
  12. ******* PSH loader *******
  13. PCM page cache size = 192 KB
  14. Cache Constraint = 0 Pages
  15. Arming IPC driver ..
  16. Adding page store pool ..
  17. PagestoreAddr(IMR Start Address) = 0x04899000
  18. pageStoreSize(IMR Size) = 0x00080000
  19.  
  20. *** Ready to receive application ***
  21.  
  22.  
  23. U-Boot 2014.04 (Jun 06 2016 - 14:40:07)
  24.  
  25. Watchdog enabled
  26. DRAM: 980.6 MiB
  27. MMC: tangier_sdhci: 0
  28. In: serial
  29. Out: serial
  30. Err: serial
  31. Hit any key to stop autoboot: 0
  32. Target:blank
  33. Partitioning already done...
  34. Flashing already done...
  35. GADGET DRIVER: usb_dnl_dfu
  36. reading vmlinuz
  37. 5461344 bytes read in 135 ms (38.6 MiB/s)
  38. Valid Boot Flag
  39. Setup Size = 0x00003c00
  40. Magic signature found
  41. Using boot protocol version 2.0c
  42. Linux kernel version 3.10.98-poky-edison+ (neck@flax) #1 SMP PREEMPT Mon Jun 6 14:32:08 PDT 2016
  43. Building boot_params at 0x00090000
  44. Loading bzImage at address 00100000 (5445984 bytes)
  45. Magic signature found
  46. Kernel command line: "rootwait root=PARTUUID=012b3303-34ac-284d-99b4-34e03a2335f4 rootfstype=ext4 console=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=4 g_multi.ethernet_config=cdc systemd.unit=multi-"
  47.  
  48. Starting kernel ...
  49.  
  50. [ 1.597547] snd_soc_sst_platform: Enter:sst_soc_probe
  51. [ 2.081840] pmic_ccsm pmic_ccsm: Error reading battery profile from battid frmwrk
  52. [ 2.090481] pmic_ccsm pmic_ccsm: Battery Over heat exception
  53. [ 2.090564] pmic_ccsm pmic_ccsm: Battery0 temperature inside boundary
  54. [ 2.097344] pmic_ccsm pmic_ccsm: Battery0 temperature inside boundary
  55.  
  56. Welcome to Linux!
  57.  
  58. Expecting device dev-ttyMFD2.device...
  59. [ OK ] Reached target Remote File Systems.
  60. [ OK ] Reached target Bluetooth.
  61. Expecting device sys-subsystem-net-devices-wlan0.device...
  62. Expecting device dev-disk-by\x2dpartlabel-factory.device...
  63. [ OK ] Reached target Paths.
  64. [ OK ] Reached target Swap.
  65. [ OK ] Set up automount boot.automount.
  66. [ OK ] Created slice Root Slice.
  67. [ OK ] Created slice User and Session Slice.
  68. [ OK ] Listening on Delayed Shutdown Socket.
  69. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  70. [ OK ] Listening on udev Control Socket.
  71. [ OK ] Listening on udev Kernel Socket.
  72. [ OK ] Listening on Journal Socket.
  73. [ OK ] Created slice System Slice.
  74. Mounting Temporary Directory...
  75. [ OK ] Created slice system-serial\x2dgetty.slice.
  76. [ OK ] Created slice system-getty.slice.
  77. Starting Create list of required static device nodes...rrent kernel...
  78. Starting udev Coldplug all Devices...
  79. Starting Load Kernel Modules...
  80. Mounting Debug File System...
  81. Mounting POSIX Message Queue File System...
  82. Starting Apply Kernel Variables...
  83. Starting Journal Service...
  84. [ OK ] Started Journal Service.
  85. [ OK ] Reached target Slices.
  86. Starting Remount Root and Kernel File Systems...
  87. [ OK ] Set up automount home.automount.
  88. [ OK ] Mounted POSIX Message Queue File System.
  89. [ OK ] Mounted Debug File System.
  90. [ OK ] Mounted Temporary Directory.
  91. [ OK ] Started Create list of required static device nodes ...current kernel.
  92. [ OK ] Started Apply Kernel Variables.
  93. [ OK ] Started Remount Root and Kernel File Systems.
  94. [ OK ] Started udev Coldplug all Devices.
  95. [ OK ] Started Load Kernel Modules.
  96. Mounting Configuration File System...
  97. Mounting FUSE Control File System...
  98. Starting Load/Save Random Seed...
  99. Starting Create Static Device Nodes in /dev...
  100. [ OK ] Mounted FUSE Control File System.
  101. [ OK ] Mounted Configuration File System.
  102. [ OK ] Started Load/Save Random Seed.
  103. [ OK ] Started Create Static Device Nodes in /dev.
  104. Starting udev Kernel Device Manager...
  105. [ OK ] Reached target Local File Systems (Pre).
  106. Mounting /var/volatile...
  107. [ OK ] Mounted /var/volatile.
  108. [ OK ] Started udev Kernel Device Manager.
  109. [ OK ] Reached target Local File Systems.
  110. Starting Trigger Flushing of Journal to Persistent Storage...
  111. Starting Create Volatile Files and Directories...
  112. [ OK ] Started Create Volatile Files and Directories.
  113. [ OK ] Found device /dev/disk/by-partlabel/factory.
  114. [ OK ] Started Trigger Flushing of Journal to Persistent Storage.
  115. [ OK ] Found device /dev/ttyMFD2.
  116. Mounting Mount for factory...
  117. Starting Network Time Synchronization...
  118. Starting Update UTMP about System Boot/Shutdown...
  119. [ OK ] Mounted Mount for factory.
  120. [ OK ] Started Network Time Synchronization.
  121. [ OK ] Started Update UTMP about System Boot/Shutdown.
  122. [ OK ] Reached target Sound Card.
  123. [ OK ] Reached target System Initialization.
  124. [ OK ] Listening on RPCbind Server Activation Socket.
  125. [ OK ] Listening on D-Bus System Message Bus Socket.
  126. [ OK ] Reached target Timers.
  127. Starting Restore Sound Card State...
  128. Starting Console System Startup Logging...
  129. [ OK ] Listening on sshd.socket.
  130. [ OK ] Started Console System Startup Logging.
  131. [ OK ] Found device /sys/subsystem/net/devices/wlan0.
  132. [ OK ] Created slice system-systemd\x2drfkill.slice.
  133. Starting Load/Save RF Kill Switch Status of rfkill2...
  134. Starting Load/Save RF Kill Switch Status of rfkill1...
  135. Starting Load/Save RF Kill Switch Status of rfkill0...
  136. [ OK ] Created slice system-systemd\x2dfsck.slice.
  137. Starting File System Check on /dev/disk/by-partlabel/home...
  138. [ OK ] Reached target Sockets.
  139. [ OK ] Reached target Basic System.
  140. Starting Edison PWR button handler...
  141. [ OK ] Started Edison PWR button handler.
  142. Starting Edison sketch check service...
  143. [ OK ] Started Edison sketch check service.
  144. Starting WPA supplicant service...
  145. Starting Daemon to load edison mcu app binary...
  146. [ OK ] Started Daemon to load edison mcu app binary.
  147. Starting Bluetooth service...
  148. Starting OpenSSH Key Generation...
  149. Starting Start or stop WiFI AP Mode in Edison...
  150. [ OK ] Started Start or stop WiFI AP Mode in Edison.
  151. Starting Bluetooth rf kill event daemon...
  152. Application available at (physical) address 0x04819000
  153. VRL mapped to 0xff217000
  154. App size = 11508 [ 8.159751] sybytes
  155.  
  156. App Authen[t OK ] Started Blication feature is disabled!
  157. Resetting IPC
  158.  
  159. *** Ready to receive application ***
  160. Starting Login Service...
  161. Starting D-Bus System Message Bus...
  162. [ OK ] Started D-Bus System Message Bus.
  163. [ OK ] Started Bluetooth service.
  164. Starting CFRS Main Application...
  165. [ OK ] Started CFRS Main Application.
  166. Starting Network Service...
  167. Starting Watchdog sample daemon...
  168. [ OK ] Started Watchdog sample daemon.
  169. Starting Crashlog service...
  170. [ OK ] Started Crashlog service.
  171. Starting Cleanjournal service...
  172. [ OK ] Started Cleanjournal service.
  173. Starting Permit User Sessions...
  174. [ OK ] Started Network Service.
  175. [ OK ] Started Load/Save RF Kill Switch Status of rfkill2.
  176. [ OK ] Started Load/Save RF Kill Switch Status of rfkill1.
  177. [ OK ] Started Load/Save RF Kill Switch Status of rfkill0.
  178. [ OK ] Started File System Check on /dev/disk/by-partlabel/home.
  179. [ OK ] Started OpenSSH Key Generation.
  180. [ OK ] Started Permit User Sessions.
  181. [ OK ] Started Login Service.
  182. Starting Hostname Service...
  183. Starting Daemon to receive the wpa_supplicant event...
  184. [ OK ] Started Daemon to receive the wpa_supplicant event.
  185. Starting Serial Getty on ttyMFD2...
  186. [ OK ] Started Serial Getty on ttyMFD2.
  187. Starting Getty on tty1...
  188. [ OK ] Started Getty on tty1.
  189. [ OK ] Reached target Login Prompts.
  190. Mounting /home...
  191. [ OK ] Reached target Network.
  192. Starting Zero-configuration networking...
  193. Starting Network Name Resolution...
  194. [ OK ] Started Network Name Resolution.
  195. [ OK ] Mounted /home.
  196. [ OK ] Started Zero-configuration networking.
  197. [ OK ] Started Hostname Service.
  198. Starting Daemon to receive the wpa_supplicant event...
  199. [ OK ] Started Daemon to receive the wpa_supplicant event.
  200. Starting The Edison status and configuration service...
  201. [ OK ] Started The Edison status and configuration service.
  202. [ OK ] Started Restore Sound Card State.
  203. [ OK ] Started WPA supplicant service.
  204. [ OK ] Created slice user-0.slice.
  205. Starting User Manager for UID 0...
  206. Starting PulseAudio Sound System...
  207. [ OK ] Started User Manager for UID 0.
  208. Starting Load/Save RF Kill Switch Status of rfkill3...
  209. [ OK ] Started Load/Save RF Kill Switch Status of rfkill3.
  210. [ OK ] Started PulseAudio Sound System.
  211. [ OK ] Reached target Multi-User System.
  212.  
  213. Poky (Yocto Project Reference Distro) 1.7.3 cfrs-edison-alpha ttyMFD2
  214.  
  215. cfrs-edison-alpha login: root
  216. Password:
  217. root@cfrs-edison-alpha:~# systemctl status cfrs
  218. ��● cfrs.service - CFRS Main Application
  219. Loaded: loaded (/usr/lib/systemd/system/cfrs.service; enabled)
  220. Active: active (running) since Fri 2016-07-01 21:37:25 UTC; 14s ago
  221. Main PID: 204 (python2)
  222. CGroup: /system.slice/cfrs.service
  223. ��└��─204 /usr/bin/python2 /home/root/cfrs/main.py
  224.  
  225. Jul 01 21:37:25 cfrs-edison-alpha systemd[1]: Started CFRS Main Application.
  226. Jul 01 21:37:29 cfrs-edison-alpha libmraa[204]: libmraa version v1.0.0 initi...0
  227. Jul 01 21:37:29 cfrs-edison-alpha libmraa[204]: edison: Arduino board detected
  228. Jul 01 21:37:29 cfrs-edison-alpha libmraa[204]: libmraa initialised for plat...2
  229. Jul 01 21:37:29 cfrs-edison-alpha python2[204]: Can't get device info: No su...e
  230. Hint: Some lines were ellipsized, use -l to show in full.
  231. root@cfrs-edison-alpha:~# systemctl stop cfrs
  232. ^C
  233. root@cfrs-edison-alpha:~# systemctl status cfrs
  234. ��● cfrs.service - CFRS Main Application
  235. Loaded: loaded (/usr/lib/systemd/system/cfrs.service; enabled)
  236. Active: deactivating (stop-sigterm) since Fri 2016-07-01 21:37:42 UTC; 1min 3s ago
  237. Main PID: 204 (python2)
  238. CGroup: /system.slice/cfrs.service
  239. ��‣ 204 [python2]
  240.  
  241. Jul 01 21:37:25 cfrs-edison-alpha systemd[1]: Started CFRS Main Application.
  242. Jul 01 21:37:29 cfrs-edison-alpha libmraa[204]: libmraa version v1.0.0 initi...0
  243. Jul 01 21:37:29 cfrs-edison-alpha libmraa[204]: edison: Arduino board detected
  244. Jul 01 21:37:29 cfrs-edison-alpha libmraa[204]: libmraa initialised for plat...2
  245. Jul 01 21:37:29 cfrs-edison-alpha python2[204]: Can't get device info: No su...e
  246. Jul 01 21:37:42 cfrs-edison-alpha systemd[1]: Stopping CFRS Main Application...
  247. Hint: Some lines were ellipsized, use -l to show in full.
  248. root@cfrs-edison-alpha:~# systemctl stop cfrs
  249. ^C
  250. root@cfrs-edison-alpha:~# systemctl status cfrs
  251. ��● cfrs.service - CFRS Main Application
  252. Loaded: loaded (/usr/lib/systemd/system/cfrs.service; enabled)
  253. Active: deactivating (stop-sigterm) since Fri 2016-07-01 21:37:42 UTC; 1min 35s ago
  254. Main PID: 204 (python2)
  255. CGroup: /system.slice/cfrs.service
  256. ��‣ 204 [python2]
  257.  
  258. Jul 01 21:37:25 cfrs-edison-alpha systemd[1]: Started CFRS Main Application.
  259. Jul 01 21:37:29 cfrs-edison-alpha libmraa[204]: libmraa version v1.0.0 initi...0
  260. Jul 01 21:37:29 cfrs-edison-alpha libmraa[204]: edison: Arduino board detected
  261. Jul 01 21:37:29 cfrs-edison-alpha libmraa[204]: libmraa initialised for plat...2
  262. Jul 01 21:37:29 cfrs-edison-alpha python2[204]: Can't get device info: No su...e
  263. Jul 01 21:37:42 cfrs-edison-alpha systemd[1]: Stopping CFRS Main Application...
  264. Hint: Some lines were ellipsized, use -l to show in full.
  265. root@cfrs-edison-alpha:~# ps | grep python
  266. 204 root 0 Z [python2]
  267. 350 root 2660 S grep python
  268. root@cfrs-edison-alpha:~# killall -9 python2
  269. root@cfrs-edison-alpha:~# systemctl status cfrs
  270. ��● cfrs.service - CFRS Main Application
  271. Loaded: loaded (/usr/lib/systemd/system/cfrs.service; enabled)
  272. Active: deactivating (stop-sigterm) since Fri 2016-07-01 21:37:42 UTC; 1min 50s ago
  273. Main PID: 204 (python2)
  274. CGroup: /system.slice/cfrs.service
  275. ��‣ 204 [python2]
  276.  
  277. Jul 01 21:37:25 cfrs-edison-alpha systemd[1]: Started CFRS Main Application.
  278. Jul 01 21:37:29 cfrs-edison-alpha libmraa[204]: libmraa version v1.0.0 initi...0
  279. Jul 01 21:37:29 cfrs-edison-alpha libmraa[204]: edison: Arduino board detected
  280. Jul 01 21:37:29 cfrs-edison-alpha libmraa[204]: libmraa initialised for plat...2
  281. Jul 01 21:37:29 cfrs-edison-alpha python2[204]: Can't get device info: No su...e
  282. Jul 01 21:37:42 cfrs-edison-alpha systemd[1]: Stopping CFRS Main Application...
  283. Hint: Some lines were ellipsized, use -l to show in full.
  284. root@cfrs-edison-alpha:~# sleep 140 # let's wait to see the kernel logs
  285. [ 240.630970] INFO: task kworker/u4:2:74 blocked for more than 120 seconds.
  286. [ 240.631063] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  287. [ 240.632216] INFO: task python2:290 blocked for more than 120 seconds.
  288. [ 240.632277] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  289. ^C
  290. root@cfrs-edison-alpha:~# dmesg | tail -n 80
  291. [ 153.345043] wl_host_event: mismatched OUI, bailing
  292. [ 161.952360] wl_host_event: mismatched OUI, bailing
  293. [ 170.552343] wl_host_event: mismatched OUI, bailing
  294. [ 179.162352] wl_host_event: mismatched OUI, bailing
  295. [ 187.761932] wl_host_event: mismatched OUI, bailing
  296. [ 196.361260] wl_host_event: mismatched OUI, bailing
  297. [ 204.970602] wl_host_event: mismatched OUI, bailing
  298. [ 213.559845] wl_host_event: mismatched OUI, bailing
  299. [ 222.153225] wl_host_event: mismatched OUI, bailing
  300. [ 230.753322] wl_host_event: mismatched OUI, bailing
  301. [ 239.357368] wl_host_event: mismatched OUI, bailing
  302. [ 240.630970] INFO: task kworker/u4:2:74 blocked for more than 120 seconds.
  303. [ 240.631063] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  304. [ 240.631139] kworker/u4:2 D 00000000 6788 74 2 0x00000000
  305. [ 240.631195] Workqueue: 0000:00:07.1 pump_messages
  306. [ 240.631214] f58d3da4 00000046 00003032 00000000 00000002 c1d0e000 f500a000 192eff67
  307. [ 240.631270] 00000003 f4cf1680 f6fef940 f60f9680 f58d3d5c c12cd601 f58d3d6c c12d070c
  308. [ 240.631323] f4cf6ae0 c12d7d00 f58d3d88 c12d7d20 f58d3d88 c1270bfc f6005130 c12d7d00
  309. [ 240.631377] Call Trace:
  310. [ 240.631419] [<c12cd601>] ? tracing_is_on+0x11/0x30
  311. [ 240.631446] [<c12d070c>] ? tracing_record_cmdline+0x1c/0x110
  312. [ 240.631474] [<c12d7d00>] ? tracing_sched_wakeup_trace+0xc0/0xc0
  313. [ 240.631499] [<c12d7d20>] ? probe_sched_wakeup+0x20/0xa0
  314. [ 240.631528] [<c1270bfc>] ? check_preempt_curr+0x6c/0x80
  315. [ 240.631554] [<c12d7d00>] ? tracing_sched_wakeup_trace+0xc0/0xc0
  316. [ 240.631581] [<c1271a9f>] ? ttwu_do_wakeup+0x10f/0x140
  317. [ 240.631611] [<c18e8563>] schedule+0x23/0x60
  318. [ 240.631637] [<c18e5bc5>] schedule_timeout+0x165/0x2a0
  319. [ 240.631663] [<c18ed1a5>] ? sub_preempt_count+0x95/0xf0
  320. [ 240.631690] [<c16ae5d9>] ? set_flis_value+0x49/0xb0
  321. [ 240.631719] [<c18e9736>] ? _raw_spin_unlock_irqrestore+0x26/0x60
  322. [ 240.631746] [<c12714ab>] ? get_parent_ip+0xb/0x40
  323. [ 240.631771] [<c18ed1a5>] ? sub_preempt_count+0x95/0xf0
  324. [ 240.631800] [<c18e761b>] wait_for_completion+0xab/0xe0
  325. [ 240.631824] [<c1272ed0>] ? wake_up_state+0x20/0x20
  326. [ 240.631850] [<c15cbf09>] handle_message+0xa09/0x1150
  327. [ 240.631890] [<c15cc6cd>] pump_messages+0x7d/0xd0
  328. [ 240.631919] [<c125e14e>] process_one_work+0xfe/0x410
  329. [ 240.631945] [<c12714ab>] ? get_parent_ip+0xb/0x40
  330. [ 240.631971] [<c18ed09d>] ? add_preempt_count+0x7d/0xf0
  331. [ 240.631996] [<c18ed1a5>] ? sub_preempt_count+0x95/0xf0
  332. [ 240.632023] [<c125e83c>] worker_thread+0xfc/0x360
  333. [ 240.632050] [<c18e9736>] ? _raw_spin_unlock_irqrestore+0x26/0x60
  334. [ 240.632077] [<c125e740>] ? rescuer_thread+0x2e0/0x2e0
  335. [ 240.632102] [<c1263bb0>] kthread+0xa0/0xb0
  336. [ 240.632127] [<c18ed1a5>] ? sub_preempt_count+0x95/0xf0
  337. [ 240.632160] [<c18ef137>] ret_from_kernel_thread+0x1b/0x28
  338. [ 240.632184] [<c1263b10>] ? kthread_create_on_node+0xc0/0xc0
  339. [ 240.632216] INFO: task python2:290 blocked for more than 120 seconds.
  340. [ 240.632277] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  341. [ 240.632348] python2 D 00000000 6912 290 1 0x00000004
  342. [ 240.632383] f5bb3dd4 00200086 f4c38700 00000000 f5026800 c1d0e000 f500a000 19439864
  343. [ 240.632437] 00000003 f4cf1680 f6fef940 f4cf6ae0 00000003 f60f96b4 f60f96bc f6fef990
  344. [ 240.632490] f5bb3db4 f5bb3da0 c12cd601 f5bb3db0 f6fef940 00000000 f6fef940 f5bb3db8
  345. [ 240.632543] Call Trace:
  346. [ 240.632577] [<c12cd601>] ? tracing_is_on+0x11/0x30
  347. [ 240.632606] [<c18e978d>] ? _raw_spin_unlock_irq+0x1d/0x40
  348. [ 240.632632] [<c126defe>] ? finish_task_switch+0x4e/0xb0
  349. [ 240.632659] [<c18e8563>] schedule+0x23/0x60
  350. [ 240.632685] [<c18e5bc5>] schedule_timeout+0x165/0x2a0
  351. [ 240.632714] [<c12714ab>] ? get_parent_ip+0xb/0x40
  352. [ 240.632740] [<c18ed1a5>] ? sub_preempt_count+0x95/0xf0
  353. [ 240.632768] [<c18e761b>] wait_for_completion+0xab/0xe0
  354. [ 240.632793] [<c1272ed0>] ? wake_up_state+0x20/0x20
  355. [ 240.632823] [<c15c5a20>] spidev_sync+0x80/0xb0
  356. [ 240.632853] [<c15c63cf>] spidev_ioctl+0x67f/0x710
  357. [ 240.632879] [<c18e96b7>] ? _raw_spin_unlock+0x17/0x40
  358. [ 240.632907] [<c1621ab9>] ? xhci_irq+0x109/0x6b0
  359. [ 240.632938] [<c15c5b00>] ? spidev_write+0xb0/0xb0
  360. [ 240.632967] [<c15c5d50>] ? spidev_probe+0x190/0x190
  361. [ 240.632993] [<c13384c6>] do_vfs_ioctl+0x306/0x550
  362. [ 240.633021] [<c148425a>] ? inode_has_perm.isra.31.constprop.64+0x3a/0x50
  363. [ 240.633046] [<c14842f7>] ? file_has_perm+0x87/0x90
  364. [ 240.633074] [<c12be901>] ? rcu_irq_exit+0x71/0xc0
  365. [ 240.633100] [<c14846db>] ? selinux_file_ioctl+0x4b/0xe0
  366. [ 240.633126] [<c1338770>] SyS_ioctl+0x60/0x90
  367. [ 240.633151] [<c18e9df8>] syscall_call+0x7/0x7
  368. [ 240.633182] [<c18e0000>] ? timer_cpu_notify+0x99/0x241
  369. [ 247.961401] wl_host_event: mismatched OUI, bailing
  370. [ 256.565576] wl_host_event: mismatched OUI, bailing
  371. root@cfrs-edison-alpha:~# uname -a
  372. Linux cfrs-edison-alpha 3.10.98-poky-edison+ #1 SMP PREEMPT Mon Jun 6 14:32:08 PDT 2016 i686 GNU/Linux
  373. root@cfrs-edison-alpha:~# systemctl status cfrs
  374. ��● cfrs.service - CFRS Main Application
  375. Loaded: loaded (/usr/lib/systemd/system/cfrs.service; enabled)
  376. Active: deactivating (final-sigkill) (Result: timeout) since Fri 2016-07-01 21:37:42 UTC; 5min ago
  377. Main PID: 204 (python2)
  378. CGroup: /system.slice/cfrs.service
  379. ��‣ 204 [python2]
  380.  
  381. Jul 01 21:37:25 cfrs-edison-alpha systemd[1]: Started CFRS Main Application.
  382. Jul 01 21:37:29 cfrs-edison-alpha libmraa[204]: libmraa version v1.0.0 initi...0
  383. Jul 01 21:37:29 cfrs-edison-alpha libmraa[204]: edison: Arduino board detected
  384. Jul 01 21:37:29 cfrs-edison-alpha libmraa[204]: libmraa initialised for plat...2
  385. Jul 01 21:37:29 cfrs-edison-alpha python2[204]: Can't get device info: No su...e
  386. Jul 01 21:37:42 cfrs-edison-alpha systemd[1]: Stopping CFRS Main Application...
  387. Jul 01 21:39:46 cfrs-edison-alpha systemd[1]: cfrs.service stop-sigterm time....
  388. Jul 01 21:41:16 cfrs-edison-alpha systemd[1]: cfrs.service still around afte....
  389. Jul 01 21:42:47 cfrs-edison-alpha systemd[1]: cfrs.service stop-final-sigter....
  390. Hint: Some lines were ellipsized, use -l to show in full.
  391. root@cfrs-edison-alpha:~# cat /usr/lib/systemd/system/cfrs.service
  392. [Unit]
  393. Description=CFRS Main Application
  394. Requires=bluetooth.target bluetooth.service pulseaudio.service
  395. After=bluetooth.target bluetooth.service
  396.  
  397. [Service]
  398. ExecStart=/usr/bin/python2 /home/root/cfrs/main.py
  399. Restart=always
  400.  
  401. [Install]
  402. WantedBy=multi-user.target
  403. root@cfrs-edison-alpha:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!