Uncompressing Linux... done, booting the kernel.
<6>Initializing cgroup subsys cpu
<5>Linux version 3.0.52-Project-Kernel-3.x+ (aditya@Titanium-Workx) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Mon Nov 26 21:15:10 IST 2012
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Samsung Latona board
<6>Reserving 4194304 bytes SDRAM for VRAM
Memory policy: ECC disabled, Data cache writeback
<6>OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
<6>SRAM: Mapped pa 0x40208000 to va 0xfe408000 size: 0x7000
<7>On node 0 totalpages: 62976
<7>free_area_init_node: node 0, pgdat c06da57c, node_mem_map c0856000
<7>  Normal zone: 512 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 62464 pages, LIFO batch:15
Starting omap_sdp_init_early
<6>Clocking rate (Crystal/Core/MPU): 26.0/400/800 MHz
<6>Reprogramming SDRC clock to 400000000 Hz
<3>dpll3_m2_clk rate change failed: -22
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 62464
<5>Kernel command line: videoout=omap_vout omap_vout.video1_numbuffers=6 omap_vout.vid1_static_vrfb_alloc=y omapfb.vram="0:4M" loglevel=4 lpj=3121152  version=Sbl(1.0.0) 2012-01-13 20:52:03 androidboot.mode=jig bootmode=0 andro
idboot.current_panel=0
<6>PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Memory: 246MB = 246MB total
<5>Memory: 238980k/238980k available, 23164k reserved, 0K highmem
<5>Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
    vmalloc : 0xd0800000 - 0xf8000000   ( 632 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .init : 0xc0008000 - 0xc003c000   ( 208 kB)
      .text : 0xc003c000 - 0xc0684f40   (6436 kB)
      .data : 0xc0686000 - 0xc06daf00   ( 340 kB)
       .bss : 0xc06daf3c - 0xc0855280   (1513 kB)
<6>Preemptible hierarchical RCU implementation.
<6>NR_IRQS:410
Starting omap_board_init_irq
<6>IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
<6>Total of 96 interrupts on 1 active controller
<6>OMAP clockevent source: GPTIMER1 at 32768 Hz
<6>sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
<6>Console: colour dummy device 80x30
<6>console [tty0] enabled
<6>Calibrating delay loop (skipped) preset value.. <c>799.29 BogoMIPS (lpj=31211
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys debug
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys freezer
<6>CPU: Testing write buffer coherency: ok
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_core
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ohci
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
<4>omap_hwmod: gpt12_fck: missing clockdomain for gpt12_fck.