Advertisement
Guest User

Smart

a guest
Feb 4th, 2012
109
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.43 KB | None | 0 0
  1. christian@christian-Laptop:~$ sudo smartctl -a /dev/sdb
  2. smartctl 5.41 2011-06-09 r3365 [i686-linux-3.0.0-15-generic] (local build)
  3. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Western Digital Caviar Green (Adv. Format)
  7. Device Model: WDC WD20EARS-00MVWB0
  8. Serial Number: WD-WCAZA3270653
  9. LU WWN Device Id: 5 0014ee 2b00e0001
  10. Firmware Version: 51.0AB51
  11. User Capacity: 2.000.398.934.016 bytes [2,00 TB]
  12. Sector Size: 512 bytes logical/physical
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: 8
  15. ATA Standard is: Exact ATA specification draft version not indicated
  16. Local Time is: Sat Feb 4 15:51:25 2012 CET
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART STATUS RETURN: incomplete response, ATA output registers missing
  22. SMART overall-health self-assessment test result: FAILED!
  23. Drive failure expected in less than 24 hours. SAVE ALL DATA.
  24. See vendor-specific Attribute list for failed Attributes.
  25.  
  26. General SMART Values:
  27. Offline data collection status: (0x84) Offline data collection activity
  28. was suspended by an interrupting command from host.
  29. Auto Offline Data Collection: Enabled.
  30. Self-test execution status: ( 0) The previous self-test routine completed
  31. without error or no self-test has ever
  32. been run.
  33. Total time to complete Offline
  34. data collection: (36600) seconds.
  35. Offline data collection
  36. capabilities: (0x7b) SMART execute Offline immediate.
  37. Auto Offline data collection on/off support.
  38. Suspend Offline collection upon new
  39. command.
  40. Offline surface scan supported.
  41. Self-test supported.
  42. Conveyance Self-test supported.
  43. Selective Self-test supported.
  44. SMART capabilities: (0x0003) Saves SMART data before entering
  45. power-saving mode.
  46. Supports SMART auto save timer.
  47. Error logging capability: (0x01) Error logging supported.
  48. General Purpose Logging supported.
  49. Short self-test routine
  50. recommended polling time: ( 2) minutes.
  51. Extended self-test routine
  52. recommended polling time: ( 255) minutes.
  53. Conveyance self-test routine
  54. recommended polling time: ( 5) minutes.
  55. SCT capabilities: (0x3035) SCT Status supported.
  56. SCT Feature Control supported.
  57. SCT Data Table supported.
  58.  
  59. SMART Attributes Data Structure revision number: 16
  60. Vendor Specific SMART Attributes with Thresholds:
  61. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  62. 1 Raw_Read_Error_Rate 0x002f 001 001 051 Pre-fail Always FAILING_NOW 14197
  63. 3 Spin_Up_Time 0x0027 253 164 021 Pre-fail Always - 1141
  64. 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2655
  65. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  66. 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
  67. 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4200
  68. 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  69. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  70. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 366
  71. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 39
  72. 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2644
  73. 194 Temperature_Celsius 0x0022 118 113 000 Old_age Always - 32
  74. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  75. 197 Current_Pending_Sector 0x0032 198 198 000 Old_age Always - 788
  76. 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 3
  77. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  78. 200 Multi_Zone_Error_Rate 0x0008 170 170 000 Old_age Offline - 8263
  79.  
  80. SMART Error Log Version: 1
  81. No Errors Logged
  82.  
  83. SMART Self-test log structure revision number 1
  84. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  85.  
  86.  
  87. SMART Selective self-test log data structure revision number 1
  88. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  89. 1 0 0 Not_testing
  90. 2 0 0 Not_testing
  91. 3 0 0 Not_testing
  92. 4 0 0 Not_testing
  93. 5 0 0 Not_testing
  94. Selective self-test flags (0x0):
  95. After scanning selected spans, do NOT read-scan remainder of disk.
  96. If Selective self-test is pending on power-up, resume after 0 minute delay.
  97.  
  98.  
  99.  
  100.  
  101. christian@christian-Laptop:~$ sudo smartctl -H /dev/sdb
  102.  
  103. smartctl 5.41 2011-06-09 r3365 [i686-linux-3.0.0-15-generic] (local build)
  104. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  105.  
  106. === START OF READ SMART DATA SECTION ===
  107. SMART STATUS RETURN: incomplete response, ATA output registers missing
  108. SMART overall-health self-assessment test result: FAILED!
  109. Drive failure expected in less than 24 hours. SAVE ALL DATA.
  110. Failed Attributes:
  111. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  112. 1 Raw_Read_Error_Rate 0x002f 001 001 051 Pre-fail Always FAILING_NOW 14197
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement