Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 1.401620] udevd[88]: starting version 173
- [ 1.447876] sky2: driver version 1.28
- [ 1.447921] sky2 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.447935] sky2 0000:01:00.0: setting latency timer to 64
- [ 1.447974] sky2 0000:01:00.0: Yukon-2 UL 2 chip revision 0
- [ 1.455033] ahci 0000:00:1f.2: version 3.0
- [ 1.455049] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.455116] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
- [ 1.455194] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
- [ 1.455197] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
- [ 1.455203] ahci 0000:00:1f.2: setting latency timer to 64
- [ 1.457891] sky2 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 1.458518] sky2 0000:01:00.0: eth0: addr 00:24:be:78:bb:65
- [ 1.461779] [drm] Initialized drm 1.1.0 20060810
- [ 1.464034] scsi0 : ahci
- [ 1.469706] scsi1 : ahci
- [ 1.470911] scsi2 : ahci
- [ 1.471498] scsi3 : ahci
- [ 1.471608] ata1: SATA max UDMA/133 abar m2048@0xd4e04000 port 0xd4e04100 irq 43
- [ 1.471613] ata2: SATA max UDMA/133 abar m2048@0xd4e04000 port 0xd4e04180 irq 43
- [ 1.471615] ata3: DUMMY
- [ 1.471616] ata4: DUMMY
- [ 1.471709] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.471715] i915 0000:00:02.0: setting latency timer to 64
- [ 1.483471] sdhci: Secure Digital Host Controller Interface driver
- [ 1.483474] sdhci: Copyright(c) Pierre Ossman
- [ 1.508264] i915 0000:00:02.0: irq 45 for MSI/MSI-X
- [ 1.508272] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 1.508273] [drm] Driver supports precise vblank timestamp query.
- [ 1.508320] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 1.652098] usb 1-2: new high speed USB device number 2 using ehci_hcd
- [ 1.808051] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.808081] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.809363] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 1.809595] ata1.00: ATA-8: WL320GLSA1672, 01.01A01, max UDMA/133
- [ 1.809598] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.809882] ata2.00: ATAPI: Optiarc BD ROM BC-5500S4, 1.Vb, max UDMA/100
- [ 1.810942] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 1.810945] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 1.811173] ata1.00: configured for UDMA/133
- [ 1.811326] scsi 0:0:0:0: Direct-Access ATA WL320GLSA1672 01.0 PQ: 0 ANSI: 5
- [ 1.811500] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.811520] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 1.811575] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.811578] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.811601] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.811795] ata2.00: configured for UDMA/100
- [ 1.812965] scsi 1:0:0:0: CD-ROM Optiarc BD ROM BC-5500S4 1.Vb PQ: 0 ANSI: 5
- [ 1.814299] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.814302] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.814398] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 1.814455] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 1.862518] fbcon: inteldrmfb (fb0) is primary device
- [ 1.862573] Console: switching to colour frame buffer device 170x48
- [ 1.862603] fb0: inteldrmfb frame buffer device
- [ 1.862605] drm: registered panic notifier
- [ 1.867691] acpi device:1d: registered as cooling_device2
- [ 1.867920] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
- [ 1.867959] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 1.868024] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 1.886696] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
- [ 1.887166] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.888612] sdhci-pci 0000:0b:03.1: SDHCI controller found [1180:0822] (rev 22)
- [ 1.888629] sdhci-pci 0000:0b:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 1.888656] sdhci-pci 0000:0b:03.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 1.888682] mmc0: no vmmc regulator found
- [ 1.888710] Registered led device: mmc0::
- [ 1.891728] mmc0: SDHCI controller on PCI [0000:0b:03.1] using DMA
- [ 1.891954] firewire_ohci 0000:0b:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.956051] usb 2-3: new high speed USB device number 3 using ehci_hcd
- [ 1.956108] firewire_ohci: Added fw-ohci device 0000:0b:03.0, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
- [ 2.340037] usb 6-1: new low speed USB device number 2 using uhci_hcd
- [ 2.456137] firewire_core: created device fw0: GUID 0800460303155534, S400
- [ 2.535699] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input4
- [ 2.535815] generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
- [ 2.535832] usbcore: registered new interface driver usbhid
- [ 2.535834] usbhid: USB HID core driver
- [ 3.554282] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
- [ 5.468954] udevd[358]: starting version 173
- [ 6.930414] lp: driver loaded but no devices found
- [ 6.994171] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
- [ 7.367844] sony_laptop: Sony Notebook Control Driver v0.6
- [ 7.386740] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input5
- [ 7.386836] input: Sony Vaio Jogdial as /devices/virtual/input/input6
- [ 7.386898] sony_laptop: brightness ignored, must be controlled by ACPI video driver
- [ 7.564962] r592 0000:0b:03.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 7.565066] r592: driver successfully loaded
- [ 7.633176] cfg80211: Calling CRDA to update world regulatory domain
- [ 7.681926] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
- [ 7.701081] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
- [ 8.113907] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 8.113921] ath9k 0000:02:00.0: setting latency timer to 64
- [ 8.164102] ath: EEPROM regdomain: 0x65
- [ 8.164105] ath: EEPROM indicates we should expect a direct regpair map
- [ 8.164109] ath: Country alpha2 being used: 00
- [ 8.164110] ath: Regpair used: 0x65
- [ 8.164114] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.164117] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.164119] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.164122] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.164124] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.164126] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.164129] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.164131] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.164133] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.164136] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.164138] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.164141] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.164143] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.164146] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.164148] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.164150] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.164153] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.164155] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.164157] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.164160] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.164162] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.164165] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.164167] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.164170] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.164172] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 8.164175] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 8.164177] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
- [ 8.165629] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 8.247960] Linux video capture interface: v2.00
- [ 8.268100] uvcvideo: Found UVC 1.00 device <unnamed> (04f2:b14e)
- [ 8.269798] input: UVC Camera (04f2:b14e) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9
- [ 8.269867] usbcore: registered new interface driver uvcvideo
- [ 8.269869] USB Video Class driver (v1.1.0)
- [ 8.346251] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
- [ 8.346980] Registered led device: ath9k-phy0
- [ 8.346988] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8d40000, irq=17
- [ 8.451500] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 8.451504] cfg80211: World regulatory domain updated:
- [ 8.451506] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 8.451509] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 8.451512] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 8.451515] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 8.451517] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 8.451520] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 8.663694] IR NEC protocol handler initialized
- [ 8.895106] IR RC5(x) protocol handler initialized
- [ 8.984923] IR RC6 protocol handler initialized
- [ 9.151628] IR JVC protocol handler initialized
- [ 9.153696] IR Sony protocol handler initialized
- [ 9.264786] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 9.264856] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
- [ 9.264893] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 9.273173] lirc_dev: IR Remote Control driver registered, major 249
- [ 9.400609] hda_codec: ALC262: SKU not ready 0x411111f0
- [ 9.400682] hda_codec: ALC262: BIOS auto-probing.
- [ 9.446515] cx231xx v4l2 driver loaded.
- [ 9.446553] cx231xx #0: New device Hauppauge Hauppauge Device @ 480 Mbps (2040:b140) with 6 interfaces
- [ 9.446555] cx231xx #0: registering interface 1
- [ 9.447225] cx231xx #0: Identified as Hauppauge EXETER (card=8)
- [ 9.557799] IR LIRC bridge handler initialized
- [ 9.635901] cx231xx #0: cx231xx_dif_set_standard: setStandard to ffffffff
- [ 9.655268] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
- [ 9.655484] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
- [ 9.655782] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
- [ 9.655883] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
- [ 9.660810] cx25840 16-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0)
- [ 9.679853] cx25840 16-0044: Firmware download size changed to 16 bytes max length
- [ 9.888446] type=1400 audit(1325699767.005:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=710 comm="apparmor_parser"
- [ 9.888456] type=1400 audit(1325699767.005:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=615 comm="apparmor_parser"
- [ 9.888867] type=1400 audit(1325699767.005:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=710 comm="apparmor_parser"
- [ 9.888897] type=1400 audit(1325699767.005:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=615 comm="apparmor_parser"
- [ 9.889132] type=1400 audit(1325699767.005:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=710 comm="apparmor_parser"
- [ 9.889169] type=1400 audit(1325699767.005:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=615 comm="apparmor_parser"
- [ 9.889717] type=1400 audit(1325699767.005:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=614 comm="apparmor_parser"
- [ 9.890135] type=1400 audit(1325699767.005:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=614 comm="apparmor_parser"
- [ 9.890406] type=1400 audit(1325699767.005:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=614 comm="apparmor_parser"
- [ 10.120675] type=1400 audit(1325699767.237:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=823 comm="apparmor_parser"
- [ 11.780049] cx25840 16-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes)
- [ 12.196672] i2c-core: driver [tuner] using legacy suspend method
- [ 12.196675] i2c-core: driver [tuner] using legacy resume method
- [ 12.541539] All bytes are equal. It is not a TEA5767
- [ 12.541551] tuner 17-0060: Tuner -1 found with type(s) Radio TV.
- [ 12.964688] tda18271 17-0060: creating new instance
- [ 12.966776] Unknown device (0) detected @ 17-0060, device not supported.
- [ 12.966782] tda18271_attach: [17-0060|M] error -22 on line 1275
- [ 12.966788] tda18271 17-0060: destroying instance
- [ 12.972279] tuner 17-0060: Tuner has no way to set tv freq
- [ 12.973405] cx231xx #0: cx231xx #0: v4l2 driver version 0.0.1
- [ 12.989777] cx231xx #0: cx231xx_dif_set_standard: setStandard to b000
- [ 13.065278] cx231xx #0: video_mux : 0
- [ 13.065281] cx231xx #0: do_mode_ctrl_overrides : 0xb000
- [ 13.066032] cx231xx #0: do_mode_ctrl_overrides NTSC
- [ 13.072615] cx231xx #0: cx231xx #0/0: registered device video1 [v4l2]
- [ 13.072652] cx231xx #0: cx231xx #0/0: registered device vbi0
- [ 13.072654] cx231xx #0: V4L2 device registered as video1 and vbi0
- [ 13.072658] cx231xx #0: EndPoint Addr 0x84, Alternate settings: 5
- [ 13.072660] cx231xx #0: Alternate setting 0, max size= 512
- [ 13.072663] cx231xx #0: Alternate setting 1, max size= 184
- [ 13.072665] cx231xx #0: Alternate setting 2, max size= 728
- [ 13.072666] cx231xx #0: Alternate setting 3, max size= 2892
- [ 13.072668] cx231xx #0: Alternate setting 4, max size= 1800
- [ 13.072671] cx231xx #0: EndPoint Addr 0x85, Alternate settings: 2
- [ 13.072673] cx231xx #0: Alternate setting 0, max size= 512
- [ 13.072675] cx231xx #0: Alternate setting 1, max size= 512
- [ 13.072677] cx231xx #0: EndPoint Addr 0x86, Alternate settings: 2
- [ 13.072679] cx231xx #0: Alternate setting 0, max size= 512
- [ 13.072681] cx231xx #0: Alternate setting 1, max size= 576
- [ 13.072684] cx231xx #0: EndPoint Addr 0x81, Alternate settings: 6
- [ 13.072686] cx231xx #0: Alternate setting 0, max size= 512
- [ 13.072688] cx231xx #0: Alternate setting 1, max size= 64
- [ 13.072690] cx231xx #0: Alternate setting 2, max size= 128
- [ 13.072691] cx231xx #0: Alternate setting 3, max size= 316
- [ 13.072693] cx231xx #0: Alternate setting 4, max size= 712
- [ 13.072695] cx231xx #0: Alternate setting 5, max size= 1424
- [ 13.072820] usbcore: registered new interface driver cx231xx
- [ 13.074157] cx231xx #0: setPowerMode::mode = 32, No Change req.
- [ 13.092779] cx231xx #0: UsbInterface::sendCommand, failed with status --71
- [ 13.096902] cx231xx #0: UsbInterface::sendCommand, failed with status --71
- [ 13.101031] cx231xx #0: can't change interface 5 alt no. to 0 (err=-71)
- [ 13.101104] cx231xx #0: cx231xxcx231xx: called cx231xx_uninit_vbi_isoc
- [ 13.101109] cx231xx #0: cx231xx_stop_stream():: ep_mask = 10
- [ 13.109278] cx231xx #0: can't change interface 5 alt no. to 0 (err=-71)
- [ 13.831095] init: failsafe main process (837) killed by TERM signal
- [ 13.887952] cx231xx #0: cx231xx-audio.c: probing for cx231xx non standard usbaudio
- [ 13.888133] cx231xx #0: EndPoint Addr 0x83, Alternate settings: 3
- [ 13.888136] cx231xx #0: Alternate setting 0, max size= 512
- [ 13.888138] cx231xx #0: Alternate setting 1, max size= 28
- [ 13.888139] cx231xx #0: Alternate setting 2, max size= 52
- [ 13.888141] cx231xx: Cx231xx Audio Extension initialized
- [ 13.992041] dvb_init: looking for tuner / demod on i2c bus: 17
- [ 14.446909] cx231xx #0: UsbInterface::sendCommand, failed with status --71
- [ 14.446917] lgdt3305_read_reg: error (addr 0e reg 0001 error (ret == -71)
- [ 14.446923] lgdt3305_attach: error -71 on line 1144
- [ 14.446926] lgdt3305_attach: unable to detect LGDT3305 hardware
- [ 14.446933] cx231xx: Failed to attach LG3305 front end
- [ 14.451029] cx231xx #0: UsbInterface::sendCommand, failed with status --71
- [ 14.455155] cx231xx #0: UsbInterface::sendCommand, failed with status --71
- [ 14.455160] cx231xx: Cx231xx dvb Extension initialized
- [ 14.598470] ppdev: user-space parallel port driver
- [ 15.215382] audit_printk_skb: 6 callbacks suppressed
- [ 15.215385] type=1400 audit(1325699772.329:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=957 comm="apparmor_parser"
- [ 15.215909] type=1400 audit(1325699772.329:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=957 comm="apparmor_parser"
- [ 17.126934] type=1400 audit(1325699774.241:16): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1051 comm="apparmor_parser"
- [ 17.127371] type=1400 audit(1325699774.241:17): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1051 comm="apparmor_parser"
- [ 17.127641] type=1400 audit(1325699774.241:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1051 comm="apparmor_parser"
- [ 17.164644] type=1400 audit(1325699774.281:19): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1050 comm="apparmor_parser"
- [ 17.247260] type=1400 audit(1325699774.361:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=1057 comm="apparmor_parser"
- [ 17.250730] type=1400 audit(1325699774.365:21): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1059 comm="apparmor_parser"
- [ 17.251267] type=1400 audit(1325699774.365:22): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1059 comm="apparmor_parser"
- [ 17.274808] type=1400 audit(1325699774.389:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1052 comm="apparmor_parser"
- [ 17.789417] sky2 0000:01:00.0: eth0: enabling interface
- [ 17.789816] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 17.833264] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 17.943361] Adding 4023292k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:4023292k
- [ 18.401747] init: apport pre-start process (1123) terminated with status 1
- [ 18.404597] init: apport post-stop process (1244) terminated with status 1
- [ 20.760959] wlan0: authenticate with 00:11:92:86:b7:40 (try 1)
- [ 20.762699] wlan0: authenticated
- [ 20.787157] wlan0: associate with 00:11:92:86:b7:40 (try 1)
- [ 20.797452] wlan0: RX AssocResp from 00:11:92:86:b7:40 (capab=0x401 status=0 aid=148)
- [ 20.797455] wlan0: associated
- [ 20.797799] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 22.199899] init: mythtv-backend main process (1341) terminated with status 127
- [ 22.199926] init: mythtv-backend main process ended, respawning
- [ 22.208775] init: mythtv-backend main process (1346) terminated with status 127
- [ 22.208802] init: mythtv-backend main process ended, respawning
- [ 22.217768] init: mythtv-backend main process (1351) terminated with status 127
- [ 22.217796] init: mythtv-backend respawning too fast, stopped
- [ 26.256934] Bluetooth: Core ver 2.16
- [ 26.256965] NET: Registered protocol family 31
- [ 26.256967] Bluetooth: HCI device and connection manager initialized
- [ 26.256969] Bluetooth: HCI socket layer initialized
- [ 26.256971] Bluetooth: L2CAP socket layer initialized
- [ 26.257420] Bluetooth: SCO socket layer initialized
- [ 26.357417] Bluetooth: RFCOMM TTY layer initialized
- [ 26.357423] Bluetooth: RFCOMM socket layer initialized
- [ 26.357424] Bluetooth: RFCOMM ver 1.11
- [ 26.380976] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 26.380979] Bluetooth: BNEP filters: protocol multicast
- [ 28.428977] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
- [ 29.775763] init: plymouth-stop pre-start process (1896) terminated with status 1
- [ 30.439804] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
- [ 31.136050] wlan0: no IPv6 routers present
- [ 39.854721] wlan0: authenticate with 00:11:93:24:62:70 (try 1)
- [ 39.856505] wlan0: authenticated
- [ 39.876238] wlan0: associate with 00:11:93:24:62:70 (try 1)
- [ 39.878365] wlan0: RX ReassocResp from 00:11:93:24:62:70 (capab=0x401 status=0 aid=48)
- [ 39.878369] wlan0: associated
- [ 40.325543] cx231xx #0: can't change interface 3 alt no. to 1 (err=-71)
- [ 40.325550] cx231xx #0: failed to set alternate setting !
- [ 40.330039] cx231xx #0: can't change interface 3 alt no. to 1 (err=-71)
- [ 40.330045] cx231xx #0: failed to set alternate setting !
- [ 1093.824089] init: mythtv-backend main process (2783) terminated with status 1
- [ 1093.824118] init: mythtv-backend main process ended, respawning
- [ 1095.793656] init: mythtv-backend main process (2797) terminated with status 1
- [ 1095.793683] init: mythtv-backend main process ended, respawning
- [ 1096.955273] init: mythtv-backend main process (2819) terminated with status 1
- [ 1096.955303] init: mythtv-backend respawning too fast, stopped
- [ 1279.854674] wlan0: deauthenticated from 00:11:93:24:62:70 (Reason: 2)
- [ 1279.874770] cfg80211: All devices are disconnected, going to restore regulatory settings
- [ 1279.874776] cfg80211: Restoring regulatory settings
- [ 1279.874781] cfg80211: Calling CRDA to update world regulatory domain
- [ 1279.878461] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 1279.878465] cfg80211: World regulatory domain updated:
- [ 1279.878467] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 1279.878470] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1279.878473] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 1279.878475] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 1279.878478] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1279.878481] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1280.911807] wlan0: authenticate with 00:11:93:24:62:70 (try 1)
- [ 1280.913562] wlan0: authenticated
- [ 1280.934456] wlan0: associate with 00:11:93:24:62:70 (try 1)
- [ 1280.937259] wlan0: RX ReassocResp from 00:11:93:24:62:70 (capab=0x401 status=0 aid=232)
- [ 1280.937263] wlan0: associated
- [ 1640.054847] wlan0: deauthenticated from 00:11:93:24:62:70 (Reason: 2)
- [ 1640.074656] cfg80211: All devices are disconnected, going to restore regulatory settings
- [ 1640.074662] cfg80211: Restoring regulatory settings
- [ 1640.074666] cfg80211: Calling CRDA to update world regulatory domain
- [ 1640.078205] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 1640.078209] cfg80211: World regulatory domain updated:
- [ 1640.078211] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 1640.078214] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1640.078216] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 1640.078219] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 1640.078221] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1640.078224] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1641.110866] wlan0: authenticate with 00:11:93:24:62:70 (try 1)
- [ 1641.113096] wlan0: authenticated
- [ 1641.136175] wlan0: associate with 00:11:93:24:62:70 (try 1)
- [ 1641.152972] wlan0: RX ReassocResp from 00:11:93:24:62:70 (capab=0x401 status=0 aid=36)
- [ 1641.152976] wlan0: associated
- [ 1760.058887] wlan0: deauthenticated from 00:11:93:24:62:70 (Reason: 2)
- [ 1760.095963] cfg80211: All devices are disconnected, going to restore regulatory settings
- [ 1760.095969] cfg80211: Restoring regulatory settings
- [ 1760.095972] cfg80211: Calling CRDA to update world regulatory domain
- [ 1760.099583] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 1760.099586] cfg80211: World regulatory domain updated:
- [ 1760.099589] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 1760.099591] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1760.099594] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 1760.099597] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 1760.099599] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1760.099602] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 1761.125039] wlan0: authenticate with 00:11:93:24:62:70 (try 1)
- [ 1761.132027] wlan0: authenticated
- [ 1761.154925] wlan0: associate with 00:11:93:24:62:70 (try 1)
- [ 1761.157027] wlan0: RX ReassocResp from 00:11:93:24:62:70 (capab=0x401 status=0 aid=52)
- [ 1761.157030] wlan0: associated
- [ 2359.855901] wlan0: deauthenticated from 00:11:93:24:62:70 (Reason: 2)
- [ 2359.883344] cfg80211: All devices are disconnected, going to restore regulatory settings
- [ 2359.883349] cfg80211: Restoring regulatory settings
- [ 2359.883353] cfg80211: Calling CRDA to update world regulatory domain
- [ 2359.887513] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 2359.887517] cfg80211: World regulatory domain updated:
- [ 2359.887519] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 2359.887522] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2359.887525] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 2359.887527] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 2359.887530] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2359.887532] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 2360.913747] wlan0: authenticate with 00:11:92:86:b7:40 (try 1)
- [ 2360.915906] wlan0: authenticated
- [ 2360.937702] wlan0: associate with 00:11:92:86:b7:40 (try 1)
- [ 2360.942126] wlan0: RX ReassocResp from 00:11:92:86:b7:40 (capab=0x401 status=0 aid=41)
- [ 2360.942130] wlan0: associated
- [ 2479.860650] wlan0: authenticate with 00:11:93:24:62:70 (try 1)
- [ 2479.862503] wlan0: authenticated
- [ 2479.872267] wlan0: associate with 00:11:93:24:62:70 (try 1)
- [ 2479.874347] wlan0: RX ReassocResp from 00:11:93:24:62:70 (capab=0x401 status=0 aid=157)
- [ 2479.874351] wlan0: associated
- mybox@mybox2:/$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement