Pastebin is 300% more awesome when you are logged in. Sign Up, it's FREE!
Guest

Untitled

By: a guest on Sep 28th, 2011  |  syntax: None  |  size: 31.05 KB  |  hits: 77  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. Initializing cgroup subsys cpu
  2. Linux version 3.0.4-gentoo (root@panda) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #1 PREEMPT Wed Sep 14 19:30:31 JST 2011
  3. BIOS-provided physical RAM map:
  4.  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
  5.  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
  6.  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
  7.  BIOS-e820: 0000000000100000 - 0000000016f70000 (usable)
  8.  BIOS-e820: 0000000016f70000 - 0000000016f7b000 (ACPI data)
  9.  BIOS-e820: 0000000016f7b000 - 0000000016f7d000 (ACPI NVS)
  10.  BIOS-e820: 0000000016f80000 - 0000000017000000 (reserved)
  11.  BIOS-e820: 0000000026f80000 - 0000000027000000 (reserved)
  12.  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
  13. Notice: NX (Execute Disable) protection missing in CPU!
  14. DMI present.
  15. DMI: IBM 2684HAJ/2684HAJ, BIOS 1SET59WW (1.27 ) 03/03/2004
  16. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  17. e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
  18. last_pfn = 0x16f70 max_arch_pfn = 0x100000
  19. MTRR default type: uncachable
  20. MTRR fixed ranges enabled:
  21.   00000-9FFFF write-back
  22.   A0000-BFFFF uncachable
  23.   C0000-CFFFF write-protect
  24.   D0000-DBFFF uncachable
  25.   DC000-DFFFF write-back
  26.   E0000-EFFFF write-protect
  27.   F0000-FFFFF uncachable
  28. MTRR variable ranges enabled:
  29.   0 base 000000000 mask FF0000000 write-back
  30.   1 base 010000000 mask FFC000000 write-back
  31.   2 base 014000000 mask FFE000000 write-back
  32.   3 base 016000000 mask FFF000000 write-back
  33.   4 base 016F80000 mask FFFF80000 uncachable
  34.   5 base 026F80000 mask FFFF80000 uncachable
  35.   6 disabled
  36.   7 disabled
  37. x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  38. initial memory mapped : 0 - 01800000
  39. Base memory trampoline at [c009c000] 9c000 size 12288
  40. init_memory_mapping: 0000000000000000-0000000016f70000
  41.  0000000000 - 0000400000 page 4k
  42.  0000400000 - 0016c00000 page 2M
  43.  0016c00000 - 0016f70000 page 4k
  44. kernel direct mapping tables up to 16f70000 @ 17fb000-1800000
  45. RAMDISK: 16e14000 - 16f60000
  46. ACPI: RSDP 000f6d90 00024 (v02 IBM   )
  47. ACPI: XSDT 16f749ff 00044 (v01 IBM    TP-1S    00001270  LTP 00000000)
  48. ACPI: FACP 16f74b00 000F4 (v03 IBM    TP-1S    00001270 IBM  00000001)
  49. ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x00008030/0x0000000000008020, using 32 (20110413/tbfadt-430)
  50. ACPI Error: 32/64X address mismatch in Gpe0Block: 0x00008018/0x0000000000008028, using 32 (20110413/tbfadt-430)
  51. ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110413/tbfadt-529)
  52. ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000802C/0x0 (20110413/tbfadt-560)
  53. ACPI: DSDT 16f74ce7 061DE (v01 IBM    TP-1S    00001270 MSFT 0100000E)
  54. ACPI: FACS 16f7c000 00040
  55. ACPI: SSDT 16f74cb4 00033 (v01 IBM    TP-1S    00001270 MSFT 0100000E)
  56. ACPI: ECDT 16f7aec5 00051 (v01 IBM    TP-1S    00001270 IBM  00000001)
  57. ACPI: BOOT 16f7afd8 00028 (v01 IBM    TP-1S    00001270  LTP 00000001)
  58. 367MB LOWMEM available.
  59.   mapped low ram: 0 - 16f70000
  60.   low ram: 0 - 16f70000
  61. Zone PFN ranges:
  62.   DMA      0x00000010 -> 0x00001000
  63.   Normal   0x00001000 -> 0x00016f70
  64. Movable zone start PFN for each node
  65. early_node_map[2] active PFN ranges
  66.     0: 0x00000010 -> 0x0000009f
  67.     0: 0x00000100 -> 0x00016f70
  68. On node 0 totalpages: 93951
  69. free_area_init_node: node 0, pgdat c13972b8, node_mem_map d6b34200
  70.   DMA zone: 32 pages used for memmap
  71.   DMA zone: 0 pages reserved
  72.   DMA zone: 3951 pages, LIFO batch:0
  73.   Normal zone: 703 pages used for memmap
  74.   Normal zone: 89265 pages, LIFO batch:15
  75. Using APIC driver default
  76. ACPI: PM-Timer IO Port: 0x8008
  77. Local APIC disabled by BIOS -- you can enable it with "lapic"
  78. APIC: disable apic facility
  79. APIC: switched to apic NOOP
  80. nr_irqs_gsi: 16
  81. PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  82. PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
  83. PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
  84. Allocating PCI resources starting at 27000000 (gap: 27000000:d8f00000)
  85. pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  86. pcpu-alloc: [0] 0
  87. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 93216
  88. Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda6 rootfstype=ext3 video=radeonfb:mtrr:3,ywrap,1024x768-32@60 gentoo=noudev
  89. PID hash table entries: 2048 (order: 1, 8192 bytes)
  90. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  91. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  92. Initializing CPU#0
  93. Memory: 366764k/376256k available (2647k kernel code, 9040k reserved, 1039k data, 316k init, 0k highmem)
  94. virtual kernel memory layout:
  95.     fixmap  : 0xfffa3000 - 0xfffff000   ( 368 kB)
  96.     vmalloc : 0xd7770000 - 0xfffa1000   ( 648 MB)
  97.     lowmem  : 0xc0000000 - 0xd6f70000   ( 367 MB)
  98.       .init : 0xc139a000 - 0xc13e9000   ( 316 kB)
  99.       .data : 0xc1295f1c - 0xc1399c00   (1039 kB)
  100.       .text : 0xc1000000 - 0xc1295f1c   (2647 kB)
  101. Checking if this processor honours the WP bit even in supervisor mode...Ok.
  102. SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  103. NR_IRQS:288
  104. CPU 0 irqstacks, hard=d640a000 soft=d6410000
  105. Extended CMOS year: 2000
  106. Console: colour VGA+ 80x25
  107. console [tty0] enabled
  108. Fast TSC calibration using PIT
  109. Detected 1993.778 MHz processor.
  110. Calibrating delay loop (skipped), value calculated using timer frequency.. 3987.55 BogoMIPS (lpj=1993778)
  111. pid_max: default: 32768 minimum: 301
  112. Mount-cache hash table entries: 512
  113. mce: CPU supports 4 MCE banks
  114. CPU: Mobile Intel(R) Celeron(R) CPU 2.00GHz stepping 09
  115. ACPI: Core revision 20110413
  116. ACPI: setting ELCR to 0200 (from 0800)
  117. Performance Events: Netburst events,
  118. no APIC, boot with the "lapic" boot parameter to force-enable it.
  119. no hardware sampling interrupt available.
  120. Netburst P4/Xeon PMU driver.
  121. ... version:                0
  122. ... bit width:              40
  123. ... generic registers:      18
  124. ... value mask:             000000ffffffffff
  125. ... max period:             0000007fffffffff
  126. ... fixed-purpose events:   0
  127. ... event mask:             000000000003ffff
  128. PM: Registering ACPI NVS region at 16f7b000 (8192 bytes)
  129. NET: Registered protocol family 16
  130. ACPI: bus type pci registered
  131. PCI: PCI BIOS revision 2.10 entry at 0xfd84c, last bus=4
  132. PCI: Using configuration type 1 for base access
  133. bio: create slab <bio-0> at 0
  134. ACPI: EC: EC description table is found, configuring boot EC
  135. ACPI: Interpreter enabled
  136. ACPI: (supports S0 S3 S4 S5)
  137. ACPI: Using PIC for interrupt routing
  138. ACPI: Power Resource [PUBS] (on)
  139. ACPI: EC: GPE = 0x2, I/O: command/status = 0x66, data = 0x62
  140. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
  141. ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  142. pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
  143. pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
  144. pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
  145. pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
  146. pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
  147. pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
  148. pci_root PNP0A03:00: host bridge window [mem 0x17000000-0xfebfffff] (ignored)
  149. pci 0000:00:00.0: [1002:cab2] type 0 class 0x000600
  150. pci 0000:00:00.0: reg 10: [mem 0xec000000-0xefffffff pref]
  151. pci 0000:00:00.0: reg 14: [mem 0xe8013000-0xe8013fff pref]
  152. pci 0000:00:01.0: [1002:7010] type 1 class 0x000604
  153. pci 0000:00:02.0: [10b9:5237] type 0 class 0x000c03
  154. pci 0000:00:02.0: reg 10: [mem 0xe8010000-0xe8010fff]
  155. pci 0000:00:02.0: PME# supported from D3cold
  156. pci 0000:00:02.0: PME# disabled
  157. pci 0000:00:03.0: [10b9:5457] type 0 class 0x000703
  158. pci 0000:00:03.0: reg 10: [mem 0xe8011000-0xe8011fff]
  159. pci 0000:00:03.0: reg 14: [io  0x8400-0x84ff]
  160. pci 0000:00:03.0: PME# supported from D3hot D3cold
  161. pci 0000:00:03.0: PME# disabled
  162. pci 0000:00:04.0: [10b9:5451] type 0 class 0x000401
  163. pci 0000:00:04.0: reg 10: [io  0x8800-0x88ff]
  164. pci 0000:00:04.0: reg 14: [mem 0xe8012000-0xe8012fff]
  165. pci 0000:00:04.0: supports D1 D2
  166. pci 0000:00:04.0: PME# supported from D2 D3hot D3cold
  167. pci 0000:00:04.0: PME# disabled
  168. pci 0000:00:06.0: [10b9:7101] type 0 class 0x000680
  169. pci 0000:00:06.0: quirk: [io  0x8000-0x803f] claimed by ali7101 ACPI
  170. pci 0000:00:06.0: quirk: [io  0x8040-0x805f] claimed by ali7101 SMB
  171. pci 0000:00:07.0: [10b9:1533] type 0 class 0x000601
  172. pci 0000:00:0b.0: [14e4:170d] type 0 class 0x000200
  173. pci 0000:00:0b.0: reg 10: [mem 0xe8000000-0xe800ffff 64bit]
  174. pci 0000:00:0b.0: reg 30: [mem 0x00000000-0x0000ffff pref]
  175. pci 0000:00:0b.0: PME# supported from D3hot D3cold
  176. pci 0000:00:0b.0: PME# disabled
  177. pci 0000:00:0c.0: [104c:ac56] type 2 class 0x000607
  178. pci 0000:00:0c.0: reg 10: [mem 0xb0000000-0xb0000fff]
  179. pci 0000:00:0c.0: supports D1 D2
  180. pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
  181. pci 0000:00:0c.0: PME# disabled
  182. pci 0000:00:0f.0: [10b9:5229] type 0 class 0x000101
  183. pci 0000:00:0f.0: reg 20: [io  0x8080-0x808f]
  184. pci 0000:01:05.0: [1002:4337] type 0 class 0x000300
  185. pci 0000:01:05.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
  186. pci 0000:01:05.0: reg 14: [io  0xd000-0xd0ff]
  187. pci 0000:01:05.0: reg 18: [mem 0xe8100000-0xe810ffff]
  188. pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
  189. pci 0000:01:05.0: supports D1 D2
  190. pci 0000:00:01.0: PCI bridge to [bus 01-01]
  191. pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
  192. pci 0000:00:01.0:   bridge window [mem 0xe8100000-0xe81fffff]
  193. pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
  194. pci_bus 0000:00: on NUMA node 0
  195. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  196. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
  197.  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
  198. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11)
  199. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11)
  200. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11)
  201. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
  202. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
  203. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11)
  204. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11)
  205. ACPI: PCI Interrupt Link [LNKI] (IRQs 3 4 5 6 7 10 *11)
  206. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
  207. vgaarb: loaded
  208. vgaarb: bridge control possible 0000:01:05.0
  209. SCSI subsystem initialized
  210. libata version 3.00 loaded.
  211. Advanced Linux Sound Architecture Driver Version 1.0.24.
  212. PCI: Using ACPI for IRQ routing
  213. PCI: pci_cache_line_size set to 64 bytes
  214. reserve RAM buffer: 000000000009f000 - 000000000009ffff
  215. reserve RAM buffer: 0000000016f70000 - 0000000017ffffff
  216. Switching to clocksource pit
  217. pnp: PnP ACPI init
  218. ACPI: bus type pnp registered
  219. pnp 00:00: [mem 0x00000000-0x0009ffff]
  220. pnp 00:00: [mem 0x000c0000-0x000c3fff]
  221. pnp 00:00: [mem 0x000c4000-0x000c7fff]
  222. pnp 00:00: [mem 0x000c8000-0x000cbfff]
  223. pnp 00:00: [mem 0x000cc000-0x000cffff]
  224. pnp 00:00: [mem 0x000d0000-0x000cffff disabled]
  225. pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
  226. pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
  227. pnp 00:00: [mem 0x000dc000-0x000dffff]
  228. pnp 00:00: [mem 0x000e0000-0x000e3fff]
  229. pnp 00:00: [mem 0x000e4000-0x000e7fff]
  230. pnp 00:00: [mem 0x000e8000-0x000ebfff]
  231. pnp 00:00: [mem 0x000ec000-0x000effff]
  232. pnp 00:00: [mem 0x000f0000-0x000fffff]
  233. pnp 00:00: [mem 0x00100000-0x16ffffff]
  234. pnp 00:00: [mem 0xfff00000-0xffffffff]
  235. system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
  236. system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
  237. system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
  238. system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
  239. system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
  240. system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
  241. system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
  242. system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
  243. system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
  244. system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
  245. system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
  246. system 00:00: [mem 0x00100000-0x16ffffff] could not be reserved
  247. system 00:00: [mem 0xfff00000-0xffffffff] has been reserved
  248. system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
  249. pnp 00:01: [bus 00-ff]
  250. pnp 00:01: [io  0x0cf8-0x0cff]
  251. pnp 00:01: [io  0x0000-0x0cf7 window]
  252. pnp 00:01: [io  0x0d00-0xffff window]
  253. pnp 00:01: [mem 0x000a0000-0x000bffff window]
  254. pnp 00:01: [mem 0x000c0000-0x000c3fff window]
  255. pnp 00:01: [mem 0x000c4000-0x000c7fff window]
  256. pnp 00:01: [mem 0x000c8000-0x000cbfff window]
  257. pnp 00:01: [mem 0x000cc000-0x000cffff window]
  258. pnp 00:01: [mem 0x000d0000-0x000d3fff window]
  259. pnp 00:01: [mem 0x000d4000-0x000d7fff window]
  260. pnp 00:01: [mem 0x000d8000-0x000dbfff window]
  261. pnp 00:01: [mem 0x000dc000-0x000dffff window]
  262. pnp 00:01: [mem 0x000e0000-0x000e3fff window]
  263. pnp 00:01: [mem 0x000e4000-0x000e7fff window]
  264. pnp 00:01: [mem 0x000e8000-0x000ebfff window]
  265. pnp 00:01: [mem 0x000ec000-0x000effff window]
  266. pnp 00:01: [mem 0x17000000-0xfebfffff window]
  267. pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
  268. pnp 00:02: [io  0x00b0-0x00b3]
  269. pnp 00:02: [io  0x0092]
  270. pnp 00:02: [io  0x040b]
  271. pnp 00:02: [io  0x0480-0x048f]
  272. pnp 00:02: [io  0x04d0-0x04d1]
  273. pnp 00:02: [io  0x04d6]
  274. pnp 00:02: [io  0xfe10-0xfe11]
  275. pnp 00:02: [io  0x0072-0x0077]
  276. pnp 00:02: [io  0x0370-0x0371]
  277. pnp 00:02: [io  0x8000-0x807f]
  278. pnp 00:02: [io  0x1600-0x167f]
  279. pnp 00:02: [mem 0xe8013000-0xe8013fff]
  280. system 00:02: [io  0x040b] has been reserved
  281. system 00:02: [io  0x0480-0x048f] has been reserved
  282. system 00:02: [io  0x04d0-0x04d1] has been reserved
  283. system 00:02: [io  0x04d6] has been reserved
  284. system 00:02: [io  0xfe10-0xfe11] has been reserved
  285. system 00:02: [io  0x0370-0x0371] has been reserved
  286. system 00:02: [io  0x8000-0x807f] could not be reserved
  287. system 00:02: [io  0x1600-0x167f] has been reserved
  288. system 00:02: [mem 0xe8013000-0xe8013fff] has been reserved
  289. system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
  290. pnp 00:03: [io  0x0000-0x000f]
  291. pnp 00:03: [io  0x0080-0x008f]
  292. pnp 00:03: [io  0x00c0-0x00df]
  293. pnp 00:03: [dma 4]
  294. pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
  295. pnp 00:04: [io  0x0061]
  296. pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
  297. pnp 00:05: [io  0x00f0]
  298. pnp 00:05: [irq 13]
  299. pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
  300. pnp 00:06: [io  0x0070-0x0071]
  301. pnp 00:06: [irq 8]
  302. pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
  303. pnp 00:07: [io  0x0060]
  304. pnp 00:07: [io  0x0064]
  305. pnp 00:07: [irq 1]
  306. pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
  307. pnp 00:08: [irq 12]
  308. pnp 00:08: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
  309. pnp 00:09: [io  0x03bc-0x03be]
  310. pnp 00:09: [irq 7]
  311. pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
  312. pnp: PnP ACPI: found 10 devices
  313. ACPI: ACPI bus type pnp unregistered
  314. Switching to clocksource acpi_pm
  315. PCI: max bus depth: 1 pci_try_num: 2
  316. pci 0000:00:0c.0: BAR 9: assigned [mem 0x28000000-0x2bffffff pref]
  317. pci 0000:00:0c.0: BAR 10: assigned [mem 0x2c000000-0x2fffffff]
  318. pci 0000:00:0b.0: BAR 6: assigned [mem 0x27000000-0x2700ffff pref]
  319. pci 0000:00:0c.0: BAR 7: assigned [io  0x1000-0x10ff]
  320. pci 0000:00:0c.0: BAR 8: assigned [io  0x1400-0x14ff]
  321. pci 0000:01:05.0: BAR 6: assigned [mem 0xe8120000-0xe813ffff pref]
  322. pci 0000:00:01.0: PCI bridge to [bus 01-01]
  323. pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
  324. pci 0000:00:01.0:   bridge window [mem 0xe8100000-0xe81fffff]
  325. Switched to NOHz mode on CPU #0
  326. pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
  327. pci 0000:00:0c.0: CardBus bridge to [bus 02-05]
  328. pci 0000:00:0c.0:   bridge window [io  0x1000-0x10ff]
  329. pci 0000:00:0c.0:   bridge window [io  0x1400-0x14ff]
  330. pci 0000:00:0c.0:   bridge window [mem 0x28000000-0x2bffffff pref]
  331. pci 0000:00:0c.0:   bridge window [mem 0x2c000000-0x2fffffff]
  332. ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
  333. PCI: setting IRQ 11 as level-triggered
  334. pci 0000:00:0c.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
  335. pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
  336. pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
  337. pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
  338. pci_bus 0000:01: resource 1 [mem 0xe8100000-0xe81fffff]
  339. pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
  340. pci_bus 0000:02: resource 0 [io  0x1000-0x10ff]
  341. pci_bus 0000:02: resource 1 [io  0x1400-0x14ff]
  342. pci_bus 0000:02: resource 2 [mem 0x28000000-0x2bffffff pref]
  343. pci_bus 0000:02: resource 3 [mem 0x2c000000-0x2fffffff]
  344. NET: Registered protocol family 2
  345. IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  346. TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  347. TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  348. TCP: Hash tables configured (established 16384 bind 16384)
  349. TCP reno registered
  350. UDP hash table entries: 256 (order: 0, 4096 bytes)
  351. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  352. NET: Registered protocol family 1
  353. pci 0000:00:07.0: Activating ISA DMA hang workarounds
  354. pci 0000:01:05.0: Boot video device
  355. PCI: CLS 32 bytes, default 64
  356. Unpacking initramfs...
  357. Freeing initrd memory: 1328k freed
  358. Simple Boot Flag at 0x35 set to 0x1
  359. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  360. ROMFS MTD (C) 2007 Red Hat, Inc.
  361. msgmni has been set to 718
  362. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  363. io scheduler noop registered
  364. io scheduler cfq registered (default)
  365. radeonfb 0000:01:05.0: power state changed by ACPI to D0
  366. radeonfb 0000:01:05.0: power state changed by ACPI to D0
  367. ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
  368. radeonfb 0000:01:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
  369. radeonfb: Retrieved PLL infos from BIOS
  370. radeonfb: Reference=14.32 MHz (RefDiv=31) Memory=183.00 Mhz, System=133.00 MHz
  371. radeonfb: PLL min 12000 max 35000
  372. i2c i2c-1: unable to read EDID block.
  373. i2c i2c-1: unable to read EDID block.
  374. i2c i2c-1: unable to read EDID block.
  375. i2c i2c-3: unable to read EDID block.
  376. i2c i2c-3: unable to read EDID block.
  377. i2c i2c-3: unable to read EDID block.
  378. Non-DDC laptop panel detected
  379. i2c i2c-2: unable to read EDID block.
  380. i2c i2c-2: unable to read EDID block.
  381. Refined TSC clocksource calibration: 1993.708 MHz.
  382. Switching to clocksource tsc
  383. i2c i2c-2: unable to read EDID block.
  384. i2c i2c-3: unable to read EDID block.
  385. i2c i2c-3: unable to read EDID block.
  386. i2c i2c-3: unable to read EDID block.
  387. radeonfb: Monitor 1 type LCD found
  388. radeonfb: Monitor 2 type no found
  389. radeonfb: panel ID string: 1024x768
  390. radeonfb: detected LVDS panel size from BIOS: 1024x768
  391. radeondb: BIOS provided dividers will be used
  392. radeonfb: Dynamic Clock Power Management enabled
  393. fbcon: ATI Radeon 4337 (fb0) is primary device
  394. Console: switching to colour frame buffer device 128x48
  395. radeonfb (0000:01:05.0): ATI Radeon 4337 "C7"
  396. ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  397. ACPI: AC Adapter [AC] (off-line)
  398. input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
  399. ACPI: Lid Switch [LID]
  400. input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
  401. ACPI: Sleep Button [SLPB]
  402. input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  403. ACPI: Power Button [PWRF]
  404. ACPI: acpi_idle registered with cpuidle
  405. Marking TSC unstable due to TSC halts in idle
  406. Switching to clocksource acpi_pm
  407. thermal LNXTHERM:00: registered as thermal_zone0
  408. ACPI: Thermal Zone [THM0] (43 C)
  409. loop: module loaded
  410. pata_ali 0000:00:0f.0: can't derive routing for PCI INT A
  411. pata_ali 0000:00:0f.0: setting latency timer to 64
  412. scsi0 : pata_ali
  413. scsi1 : pata_ali
  414. ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8080 irq 14
  415. ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8088 irq 15
  416. i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
  417. serio: i8042 KBD port at 0x60,0x64 irq 1
  418. serio: i8042 AUX port at 0x60,0x64 irq 12
  419. mousedev: PS/2 mouse device common for all mice
  420. rtc_cmos 00:06: RTC can wake from S4
  421. rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
  422. input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  423. rtc0: alarms up to one month, y3k, 114 bytes nvram
  424. i2c /dev entries driver
  425. cpuidle: using governor ladder
  426. cpuidle: using governor menu
  427. ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
  428. ALI 5451 0000:00:04.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
  429. ata1.00: HPA detected: current 51733380, native 58605120
  430. ata1.00: ATA-5: HITACHI_DK23EA-30B, 00K4A0B6, max UDMA/100
  431. ata1.00: 51733380 sectors, multi 16: LBA
  432. ata1.00: configured for UDMA/100
  433. ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  434. ACPI: Battery Slot [BAT0] (battery present)
  435. scsi 0:0:0:0: Direct-Access     ATA      HITACHI_DK23EA-3 00K4 PQ: 0 ANSI: 5
  436. sd 0:0:0:0: [sda] 51733380 512-byte logical blocks: (26.4 GB/24.6 GiB)
  437. sd 0:0:0:0: [sda] Write Protect is off
  438. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  439. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  440.  sda: sda1 sda2 < sda5 sda6 > sda3 sda4
  441. sd 0:0:0:0: [sda] Attached SCSI disk
  442. ata2.00: ATAPI: DW-224E, B.2A, max UDMA/33
  443. ata2.00: WARNING: ATAPI DMA disabled for reliability issues.  It can be enabled
  444. ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
  445. ata2.00: configured for UDMA/33
  446. scsi 1:0:0:0: CD-ROM            TEAC     DW-224E          B.2A PQ: 0 ANSI: 5
  447. sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
  448. cdrom: Uniform CD-ROM driver Revision: 3.20
  449. sr 1:0:0:0: Attached scsi CD-ROM sr0
  450. IBM TrackPoint firmware: 0x0e, buttons: 3/3
  451. input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input4
  452. AC'97 1 does not respond - RESET
  453. AC'97 1 access is not valid [0xffffffff], removing mixer.
  454. ali mixer 1 creating error.
  455. ALSA device list:
  456.   #0: ALI 5451 at 0x8800, irq 11
  457. TCP cubic registered
  458. NET: Registered protocol family 17
  459. Using IPI Shortcut mode
  460. rtc_cmos 00:06: setting system clock to 2011-09-29 12:08:58 UTC (1317298138)
  461. Freeing unused kernel memory: 316k freed
  462. sd 0:0:0:0: Attached scsi generic sg0 type 0
  463. sr 1:0:0:0: Attached scsi generic sg1 type 5
  464. usbcore: registered new interface driver usbfs
  465. usbcore: registered new interface driver hub
  466. usbcore: registered new device driver usb
  467. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  468. ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
  469. Initializing USB Mass Storage driver...
  470. usbcore: registered new interface driver usb-storage
  471. USB Mass Storage support registered.
  472. uhci_hcd: USB Universal Host Controller Interface driver
  473. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  474. ohci_hcd: block sizes: ed 64 td 64
  475. ohci_hcd 0000:00:02.0: power state changed by ACPI to D0
  476. ohci_hcd 0000:00:02.0: power state changed by ACPI to D0
  477. ACPI: PCI Interrupt Link [LNKI] enabled at IRQ 11
  478. ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKI] -> GSI 11 (level, low) -> IRQ 11
  479. ohci_hcd 0000:00:02.0: OHCI Host Controller
  480. ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
  481. ohci_hcd 0000:00:02.0: created debug files
  482. ohci_hcd 0000:00:02.0: supports USB remote wakeup
  483. ohci_hcd 0000:00:02.0: irq 11, io mem 0xe8010000
  484. ohci_hcd 0000:00:02.0: enabling initreset quirk
  485. ohci_hcd 0000:00:02.0: OHCI controller state
  486. ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
  487. ohci_hcd 0000:00:02.0: control 0x083 HCFS=operational CBSR=3
  488. ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
  489. ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
  490. ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH
  491. ohci_hcd 0000:00:02.0: hcca frame #0003
  492. ohci_hcd 0000:00:02.0: roothub.a 01000202 POTPGT=1 NPS NDP=2(2)
  493. ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
  494. ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
  495. ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
  496. ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
  497. usb usb1: default language 0x0409
  498. usb usb1: udev 1, busnum 1, minor = 0
  499. usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
  500. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  501. usb usb1: Product: OHCI Host Controller
  502. usb usb1: Manufacturer: Linux 3.0.4-gentoo ohci_hcd
  503. usb usb1: SerialNumber: 0000:00:02.0
  504. usb usb1: usb_probe_device
  505. usb usb1: configuration #1 chosen from 1 choice
  506. usb usb1: adding 1-0:1.0 (config #1, interface 0)
  507. hub 1-0:1.0: usb_probe_interface
  508. hub 1-0:1.0: usb_probe_interface - got id
  509. hub 1-0:1.0: USB hub found
  510. hub 1-0:1.0: 2 ports detected
  511. hub 1-0:1.0: standalone hub
  512. hub 1-0:1.0: no power switching (usb 1.0)
  513. hub 1-0:1.0: global over-current protection
  514. hub 1-0:1.0: power on to power good time: 2ms
  515. hub 1-0:1.0: local power source is good
  516. hub 1-0:1.0: no over-current condition exists
  517. hub 1-0:1.0: trying to enable port power on non-switchable hub
  518. usbcore: registered new interface driver usbhid
  519. usbhid: USB HID core driver
  520. hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
  521. sl811: driver sl811-hcd, 19 May 2005
  522. device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  523. ohci_hcd 0000:00:02.0: auto-stop root hub
  524. tg3.c:v3.119 (May 18, 2011)
  525. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
  526. tg3 0000:00:0b.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  527. tg3 0000:00:0b.0: eth0: Tigon3 [partno(BCM95901A50) rev 3001] (PCI:33MHz:32-bit) MAC address 00:06:1b:dd:c8:ab
  528. tg3 0000:00:0b.0: eth0: attached PHY is 5705 (10/100Base-TX Ethernet) (WireSpeed[1], EEE[0])
  529. tg3 0000:00:0b.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
  530. tg3 0000:00:0b.0: eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
  531. Loading iSCSI transport class v2.0-870.
  532. EXT3-fs: barriers not enabled
  533. EXT3-fs (sda6): mounted filesystem with ordered data mode
  534. kjournald starting.  Commit interval 5 seconds
  535. hub 1-0:1.0: hub_suspend
  536. usb usb1: bus auto-suspend
  537. ohci_hcd 0000:00:02.0: suspend root hub
  538. udevd[3315]: starting version 171
  539. Linux agpgart interface v0.103
  540. agpgart-ati 0000:00:00.0: Ati IGP330/340/345/350/M chipset
  541. reserve_ram_pages_type failed 0x16637000-0x16638000, track 0x10, req 0x10
  542. reserve_ram_pages_type failed 0x1660f000-0x16610000, track 0x10, req 0x10
  543. reserve_ram_pages_type failed 0x1663c000-0x1663d000, track 0x10, req 0x10
  544. reserve_ram_pages_type failed 0x16605000-0x16606000, track 0x10, req 0x10
  545. reserve_ram_pages_type failed 0x16654000-0x16655000, track 0x10, req 0x10
  546. reserve_ram_pages_type failed 0x16624000-0x16625000, track 0x10, req 0x10
  547. reserve_ram_pages_type failed 0x16617000-0x16618000, track 0x10, req 0x10
  548. reserve_ram_pages_type failed 0x1661f000-0x16620000, track 0x10, req 0x10
  549. reserve_ram_pages_type failed 0x16651000-0x16652000, track 0x10, req 0x10
  550. reserve_ram_pages_type failed 0x1663d000-0x1663e000, track 0x10, req 0x10
  551. reserve_ram_pages_type failed 0x1665c000-0x1665d000, track 0x10, req 0x10
  552. reserve_ram_pages_type failed 0x16633000-0x16634000, track 0x10, req 0x10
  553. reserve_ram_pages_type failed 0x16638000-0x16639000, track 0x10, req 0x10
  554. reserve_ram_pages_type failed 0x16632000-0x16633000, track 0x10, req 0x10
  555. reserve_ram_pages_type failed 0x16664000-0x16665000, track 0x10, req 0x10
  556. reserve_ram_pages_type failed 0x1663a000-0x1663b000, track 0x10, req 0x10
  557. reserve_ram_pages_type failed 0x15dcc000-0x15dcd000, track 0x10, req 0x10
  558. agpgart-ati 0000:00:00.0: AGP aperture is 64M @ 0xec000000
  559. Non-volatile memory driver v1.3
  560. yenta_cardbus 0000:00:0c.0: CardBus bridge found [1014:0528]
  561. yenta_cardbus 0000:00:0c.0: Using INTVAL to route CSC interrupts to PCI
  562. yenta_cardbus 0000:00:0c.0: Routing CardBus interrupts to PCI
  563. yenta_cardbus 0000:00:0c.0: TI: mfunc 0x01d01002, devctl 0x64
  564. yenta_cardbus 0000:00:0c.0: ISA IRQ mask 0x04f8, PCI irq 11
  565. yenta_cardbus 0000:00:0c.0: Socket status: 30000007
  566. thinkpad_acpi: ThinkPad ACPI Extras v0.24
  567. thinkpad_acpi: http://ibm-acpi.sf.net/
  568. thinkpad_acpi: ThinkPad BIOS 1SET59WW (1.27 ), EC unknown
  569. thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
  570. thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
  571. thinkpad_acpi: detected a 8-level brightness capable ThinkPad
  572. Registered led device: tpacpi::thinklight
  573. Registered led device: tpacpi::power
  574. Registered led device: tpacpi::standby
  575. thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
  576. input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
  577. [drm] Initialized drm 1.1.0 20060810
  578. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  579. [drm] No driver support for vblank timestamp query.
  580. [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0
  581. EXT3-fs (sda6): using internal journal
  582. Adding 498924k swap on /dev/sda5.  Priority:-1 extents:1 across:498924k
  583. tg3 0000:00:0b.0: eth0: Link is up at 100 Mbps, full duplex
  584. tg3 0000:00:0b.0: eth0: Flow control is on for TX and on for RX
  585. usb usb1: usb wakeup-resume
  586. usb usb1: usb auto-resume
  587. ohci_hcd 0000:00:02.0: wakeup root hub
  588. hub 1-0:1.0: hub_resume
  589. ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
  590. hub 1-0:1.0: port 1: status 0101 change 0001
  591. hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
  592. hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
  593. ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
  594. usb 1-1: new full speed USB device number 2 using ohci_hcd
  595. ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
  596. usb 1-1: default language 0x0409
  597. usb 1-1: udev 2, busnum 1, minor = 1
  598. usb 1-1: New USB device found, idVendor=601a, idProduct=4740
  599. usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  600. usb 1-1: Product: JZ4740 USB Boot Device
  601. usb 1-1: Manufacturer: Ingenic
  602. usb 1-1: usb_probe_device
  603. usb 1-1: configuration #1 chosen from 1 choice
  604. usb 1-1: adding 1-1:1.0 (config #1, interface 0)
  605. hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002
  606. hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002
  607. ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00030100 PESC CSC PPS
  608. hub 1-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
  609. usb 1-1: USB disconnect, device number 2
  610. usb 1-1: unregistering device
  611. usb 1-1: unregistering interface 1-1:1.0
  612. usb 1-1: usb_disable_device nuking all URBs
  613. hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
  614. ohci_hcd 0000:00:02.0: auto-stop root hub
  615. hub 1-0:1.0: hub_suspend
  616. usb usb1: bus auto-suspend
  617. ohci_hcd 0000:00:02.0: suspend root hub
  618. usb usb1: usb wakeup-resume
  619. usb usb1: usb auto-resume
  620. ohci_hcd 0000:00:02.0: wakeup root hub
  621. hub 1-0:1.0: hub_resume
  622. ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
  623. hub 1-0:1.0: port 1: status 0101 change 0001
  624. hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
  625. hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
  626. ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
  627. usb 1-1: new full speed USB device number 3 using ohci_hcd
  628. ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
  629. usb 1-1: default language 0x0409
  630. usb 1-1: udev 3, busnum 1, minor = 2
  631. usb 1-1: New USB device found, idVendor=601a, idProduct=4740
  632. usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  633. usb 1-1: Product: JZ4740 USB Boot Device
  634. usb 1-1: Manufacturer: Ingenic
  635. usb 1-1: usb_probe_device
  636. usb 1-1: configuration #1 chosen from 1 choice
  637. usb 1-1: adding 1-1:1.0 (config #1, interface 0)
  638. hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002
  639.  
  640.