API tools faq
paste
mangusta86

Huawei U9508 / U9510 bootloader

mangusta86
Aug 16th, 2013
350
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 30.05 KB | None | 0 0
raw download clone embed print report
  1. \00\81\00\00\00\00\00A\00n\00d\00r\00o\00i\00d\00 \002\00.\000\00 H\00I\003\006\002\000\00\00\00\00\80\00\00@\00\00\00\C0\81\00\00@\81\00\00@\00\00@\00\00@\00\00@\00\00@#\00\00\C0\00\00@\00\00@\00\00@A\00\00@\00\00@\00\00@\00\00@\00\00@#\00\00@#\00\00@\00\00@\00\00@\00\00@\00\00@\00\00@'\00\00@'\00\00emmc_get_blknr\00\00emmc_set_clock_and_width\00\00\00\00emmc_erase_by_blkaddr\00\00\00emmc_multi_blk_read_DMA\00emmc_read\00\00\00emmc_multi_blk_write_DMA\00\00\00\00emmc_write_by_block\00emmc_write\00\00emmc_init\00\00\00emmc_write_zero\00write_efuse_data\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00mipi_dsi_lwrite\00mipi_dsi_swrite\00mipi_dsi_cmd_add\00\00\00\00get_dsi_phy_ctrl\00\00\00\00
  2. Version mode[normal:factory] is: %s
  3. \00\00normal\00\00xloader\00can't find ptn xloader
  4. \00flash_read xloader FAIL!!!
  5. \00secure boot: verify fastboot failure
  6. \00\00\00
  7. read fastboot success !
  8. \00\00half=%x
  9. \00\00\00\00secure boot: init failure
  10. \00\00secure boot: check total failure
  11. \00\00\00secure boot: verify total failure
  12. \00\00out=NULL
  13. \00\00\00fullspeed\00\00\00highspeed\00\00\00usb: online (%s)
  14. \00\00\00cmd :%s
  15. \00\00\00\00reboot\00\00-bootloader\00OKAY\00\00\00\00-recovery\00\00\00FAILNot allowed!\00\00\00\00 - FAIL
  16. \00\00\00\00getvar:\00version\00product\00U9510\00\00\00serialno\00\00\00\00eyetest\00recovery\00\00\00\00download:\00\00\00 - FAIL: data too large
  17. \00\00\00\00FAILdata too large\00\00DATA\00\00\00\00 - OKAY
  18. \00\00\00\00erase:\00\00fastboot\00\00\00\00xloader\00FAILpartition does not exist\00\00\00\00FAILfailed to erase fastboot partition\00\00FAILfailed to erase xloader partition\00\00\00FAILcan not 'erase' fastboot partition, please using 'flash'\00\00\00\00FAILfailed to erase partition\00\00\00flash:\00\00efuse\00\00\00FAILefuse data size is error\00\00\00\00FAILefuse write error\00\00\00sec_vtab_p\00\00sec_vtab_m\00\00secure boot: skip sec partition
  19. \00\00\00\00INFOSkip sec partition
  20. \00FAILflash failure, ErrNo:1\00\00secure boot: peel table error
  21. \00\00boot\00\00\00\00FAILflash failure, ErrNo:2\00\00secure boot: no table error
  22. \00\00\00\00FAILflash failure, ErrNo:3\00\00secure boot: clear token error
  23. \00FAILflash failure, ErrNo:4\00\00secure boot: verify fb table error
  24. \00sparse flash write failure\00\00INFOOKAY
  25. \00\00\00FAILverify failure, ErrNo:6\00secure boot: verify flashimg failure
  26. \00\00\00FAILflash failure, ErrNo:7\00\00secure boot: fastboot size error
  27. \00\00\00FAILflash write failure\00FAILverify failure, ErrNo:8\00signature\00\00\00FAILsignature not 256 bytes long\00\00\00\00oem erase_emmc\00\00FAILfailed to erase emmc\00\00\00\00efi\00FAILfailed to erase fastboot\00\00\00\00oem \00\00\00\00unlock \00FAILunlock failure, ErrnNo:1\00\00\00\00FAILunlock failure, ErrNo:2\00relock \00FAILrelock failure, ErrnNo:1\00\00\00\00FAILrelock failure, ErrnNo:2\00\00\00\00FAILrelock OK, but resecure failure\00get-lockstate\00\00\00get lock state: UNLOCKED
  28. \00\00\00INFOunlocked\00\00\00\00get lock state: RELOCKED
  29. \00\00\00INFOrelocked\00\00\00\00get lock state: LOCKED
  30. \00INFOlocked\00\00resecure\00\00\00\00FAILresecure failure\00\00\00\00oem resecure failure
  31. \00\00\00oem resecure OK
  32. \00\00\00\00FAILinvalid command\00misc\00\00\00\00can't find ptn misc
  33. \00\00\00\00[get_misc_message] mmc_read failed
  34. \00\00\00\00
  35. entry execute_load_kernel function
  36. \00\00\00boot\00\00\00\00can't find ptn zImage
  37. \00\00
  38. entry Download function
  39. \00\00
  40. entry Recovery function
  41. \00\00
  42. case RECOVERY_MODE:
  43. \00\00
  44. case FASTBOOT_MODE:
  45. \00\00
  46. case SHUTDOWN_MODE:
  47. \00\00
  48. case NORMAL_MODE:
  49. \00\00\00\00
  50. case HIBENCH_MODE:
  51. \00\00\00
  52. unknow mode goto normal:
  53. \00[fastboot]: check_fastboot:0x%x.
  54. \00\00\00[fastboot]: get_bootmode:0x%x.
  55. \00[fastboot]: reset_flag %d.
  56. \00\00\00\00[fastboot]: abnormal_reset_flag %d.
  57. \00\00\00[fastboot]: @get_poweroff_alarm 0x%x.
  58. \00\00[fastboot]:k3_led_blue_on
  59. \00[fastboot]:k3_led_green_on
  60. \00\00\00\00CHECKPOINT\00\00reserved2\00\00\00can't find ptn hibench image to check
  61. \00\00can't read hibench image from emmc to check
  62. \00\00\00\00HIBENCH\00[fastboot]: hibench in reserved2
  63. \00\00[fastboot]: reserved2 is empty
  64. \00\00\00\00[fastboot]: get_powerdown_charge:%d .
  65. \00\00[fastboot]: keyval = 0x%x.
  66. \00[fastboot]: abnormal reset.
  67. \00\00\00[fastboot]: get_power_state:%d.
  68. \00\00\00[fastboot]: power down goto shut down !
  69. \00\00\00[fastboot]: unknow power state.
  70. \00\00\00\00[fastboot]: volumeup and volumedown key pressed: entering recovery
  71. \00\00\00\00UPDATE:USB\00\00UPDATE:SD\00\00\00[fastboot]: misc command write Failed
  72. \00\00[fastboot]: volumeup key pressed: entering recovery
  73. \00\00\00\00[fastboot]: volumedown key pressed: entering fastboot
  74. \00\00[fastboot]: no key pressed
  75. \00[fastboot]: unknow key pressed
  76. \00[fastboot]: get misc info goto recovery
  77. \00\00\00boot-recovery\00\00\00[fastboot]: reg_value=%d.
  78. \00\00[fastboot]: poweron key pressed 10s, means reset !
  79. \00[fastboot]:power on key pressed 10s!
  80. \00\00\00[fastboot]: reset event happened !
  81. \00[fastboot]:power on key reset !
  82. \00\00\00\00[fastboot]: poweron key release less 1s.
  83. \00\00\00[fastboot]: poweron key pressed 1s.
  84. \00\00\00\00[fastboot]: poweron key release less 1s..
  85. \00\00[fastboot]: poweron key pressed 1s..
  86. \00\00\00[fastboot]:abnormal reset !
  87. \00\00\00\00[fastboot]: reboot type 0x%x
  88. \00\00\00[fastboot]: cold reset goto normal mode!
  89. \00\00[fastboot] rebootmap = %s
  90. \00\00[fastboot]: reboot command [%s]
  91. \00\00\00\00recovery\00\00\00\00[fastboot]: reboot recovery
  92. \00\00\00\00panic\00\00\00[fastboot]: reboot normal by panic
  93. \00resetfactory\00\00\00\00RESET:FACTORY\00\00\00resetuser\00\00\00RESET:USER\00\00sdupdate\00\00\00\00usbupdate\00\00\00oem_rtc\00[fastboot]: reboot into alarm
  94. \00\00[fastboot]: get_poweroff_alarm goto normal !
  95. \00\00[fastboot]: powerdown charge is true goto recovery !
  96. \00\00[fastboot]: poweron by usb or adapter with battery is not present!
  97. \00[fastboot]: power on key pressed goto normal mode!
  98. \00\00\00\00[fastboot]:power on key pressed less 1s!
  99. \00\00\00sd init ok
  100. \00/dload/once.cfg\00[fastboot]: @get_sdcard_update_flag %d.
  101. \00\00\00\00/dload/unlmt.cfg\00\00\00\00[fastboot]no update file !
  102. \00num_to_dec:out is NULL
  103. \00androidboot.swtype=normal\00\00\00 \00\00\00cmd_line_mem_size = 0x%x
  104. \00\00\00memory is smaller than 512M
  105. \00\00\00\00mem_size=\00\00\002G\00\001G\00\00secure boot: boot zImage failure
  106. \00\00\00secure boot: boot zImage
  107. \00\00\00Boot zImage FAIL
  108. \00\00\00
  109. Booting Linux
  110. \00normal_reset_type=press1s, \00normal_reset_type=press10s, \00\00\00\00normal_reset_type=AbnormalReset, \00\00\00normal_reset_type=ColdReset, \00\00\00normal_reset_type=PoweroffAlarm, \00\00\00normal_reset_type=PanicReset, \00\00enter_recovery=\00cpu_maxfreq=\00\00\00\00CPUFREQ\00LOGCTL\00\00setup_logctl=\00\00\000123456789ABCDEF\00\00\00\00androidboot.serialno=\00\00\00BOARDID\00fastboot_version=\00\00\00U9508V100R001C00B107_FASTBOOT\00\00\00k3v2_mem=\00\00\00K@0x\00\00\00\00hpm_value=\00\00androidboot.powerupreason=RTC \00\00androidboot.powerupreason=USBUPDATE \00\00\00\00androidboot.powerupreason=NORMAL \00\00\00oem_rtc \00\00\00\00pd_charge=\00\00secure boot: boot boot.img failure
  111. \00secure boot: boot boot.img
  112. \00read boot head FAIL
  113. \00\00\00\00ANDROID!\00\00\00\00read kernel FAIL
  114. \00\00\00read ramdisk FAIL
  115. \00\00creat_cmdline FAIL
  116. \00do not read cmdline
  117. \00\00\00\00recovery\00\00\00\00can't find ptn
  118. \00su\00\00sl\00\00
  119. Booting Linux zImage
  120. \00\00secure boot(kernel): check total failure
  121. \00\00\00secure boot(kernel): verify system failure
  122. \00
  123. APLL0: the anticipant frequency is lower than 400Mhz
  124. \00
  125. APLL1: the anticipant frequency is lower than 400Mhz
  126. \00voltage is out of range(%dmv,%dmv)
  127. \00
  128. Start Triming
  129. \00Change Voltage to %d is Success.
  130. \00\00\00Change Voltage to %d is Failed.
  131. \00\00\00\00Change Frequence to %d is Success.
  132. \00Change Frequence to %d is failed, Over!!
  133. \00\00\00Change Voltage Failed, Over!!
  134. \00\00The voltage %d is out of range, change voltage to :%d
  135. \00\00trim time out !!
  136. \00\00\00
  137. Reference_hpm = %d,
  138. Reference_Voltage = %d,
  139. Reference_Frequence = %d,
  140. Triming_Voltage = %d
  141. \00hpm value=%d
  142. \00\00
  143. Triming_Disable
  144. \00\00\00Set Voltage to 1170mV
  145. \00\00
  146. Triming_enable vol=%d, freq=%d triming.
  147. \00\00\00mem=245M hisi_mem=0M console=ttyAMA0,115200\00Arch Type %d
  148. \00\00\00Arch Type %d Not found! %d default
  149. \00[kpc]invalid keytype.
  150. \00\00usbphy tune error.
  151. \00USB: DMA mode.
  152. \00AHB error on IN EP0.
  153. \00\00\00Timeout on IN EP0.
  154. \00AHB error on OUT EP0.
  155. \00\00AHB error on OUT EP1.
  156. \00\00SETUP phase done on OUT EP1.
  157. \00\00
  158. Timer initial ok!
  159. \00
  160. Timer initial failure!
  161. \00\00\00\00
  162. error gpio_group in get_gpio_group!
  163. \00\00
  164. error gpio_base_addr in get_gpio_base_addr.
  165. \00\00
  166. error number in get_gpio_number
  167. \00\00MMC update clock HLE ERROR
  168. \00MMC update clock time out ERROR
  169. \00\00\00\00send CMD time out
  170. \00\00%s:%d
  171. \00\00update ext csd time out
  172. \00\00\00\00maybe switch eMMC mode error
  173. \00\00\00DDR mode emmc
  174. \00\00check tran status time out
  175. \00status = %d
  176. \00\00\00\00emmc_read:out of partition
  177. \00write data...
  178. \00\00wait write busy...
  179. \00emmc_write_by_block:out of partition
  180. \00\00\00emmc_write:out of partition
  181. \00\00\00\00reset ip time out
  182. \00\00reset BMOD time out
  183. \00\00\00\00disable MMC clock error!
  184. \00\00\00enable MMC clock error!
  185. \00\00\00\00CMD1 time out
  186. \00\00alter HS mode fail
  187. \00set clock&width fail
  188. \00\00\00eMMC controller init error!
  189. \00\00\00\00emun eMMC error!
  190. \00\00\00%s:partition:%s, length:%d,write_bytes:%d
  191. \00\00xloader\00MMC update clock HLE ERROR
  192. \00send CMD time out... intr:0x%x,cmd->opcode:%d
  193. \00write data time out
  194. \00\00\00\00read data time out
  195. \00SDcard isn't present.
  196. \00\00voltage_switch - 3.3V
  197. \00\00voltage_switch - 1.8V
  198. \00\001.20V is not supported\00\00unknown signal voltage\00\00get INT_CD time out,int=0x%x
  199. \00\00\00FAT32 \00\00\00\00FAT16 \00\00\00\00FAT12 \00\00\00\00Error reading data
  200. \00Invalid FAT entry
  201. \00\00\00\00\00\00Error reading cluster
  202. \00\00FAT\00fat ok
  203. \00size is %d
  204. \00size %d MB exceeded
  205. \00\00\00\00sparse: bad magic
  206. \00\00sparse: format
  207. \00sparse: bad size %d
  208. \00\00\00\00sparse:size %d MB exceeded.
  209. \00\00\00\00sparse: write failed
  210. \00\00\00sparse: size %d MB exceeded
  211. \00\00\00\00sparse: ID %04x
  212. \00\00\00\00sparse: :%d, :%d
  213. \00\00\00[nve_write]Bad parameter,address is invalid!
  214. \00\00\00[nve_write]emmc read error!
  215. \00\00\00\00[NVE]NV initilize failed.
  216. \00\00[NVE]invalid input parameter.
  217. \00\00[NVE]NV items is not defined.
  218. \00\00[NVE]Bad parameter:valid size is bigger than 104,surplus will be neglected!
  219. \00\00\00\00[NVE]Bad parameter:valid size is 0,will be reassigned by the nv_size stored in index table
  220. \00[nve_read]Bad parameter,address is invalid!
  221. \00\00\00\00[nve_read]emmc read error!
  222. \00[nve_check_partition]nve_read error!
  223. \00\00\00Hisi-K3v200-NV-Partition\00\00\00\00buffer_temp memory alloc error!
  224. \00\00\00\00NVE_STRUCT_ADDR memory alloc error!
  225. \00\00\00\00NVE_RAMDISK_ADDR memory alloc error!
  226. \00\00\00NVE_RAMDISK_TEMP_ADDR memory alloc error!
  227. \00\00NVE_INDEX_TABLE_ADDR memory alloc error!
  228. \00\00\00nvme\00\00\00\00[get_nve_info]error!No nvme partiton in ptable!
  229. \00\00\00\00[init_nve]get_nv_info error!
  230. \00\00\00[nve_restore]nve_read error!
  231. \00\00\00[nve_restore]nve_write error!
  232. \00\00[nve_erase]emmc write error!
  233. \00\00\00[init_nve]partition 0 is valid,restore it to current partition
  234. \00[init_nve]No useful NV partition!
  235. \00\00[init_nve]nve_read error!
  236. \00\00[nve_do_index_table] failed to allocate index table!
  237. \00\00\00[init_nve]NV init ok!
  238.  
  239. \00[init_nve]nve_do_index_table error!
  240. \00\00\00\00boardid=0x\00\00,0x\00boardid:0x%x.
  241. \00\00k3 fastboot i2c: invalid adapter
  242. \00\00\00k3 fastboot i2c : send time out !!!
  243. \00\00\00\00k3_i2c_write failure!
  244. \00\00k3 i2c: i2c bus busy
  245. \00\00\00k3 fastboot i2c : receive time out !!!
  246. \00k3_i2c_read failure!
  247. \00\00\00no charger plugin
  248. \00\00ac charger detected = :%d.
  249. \00\00\00\00voltage = %d,capacity = %d
  250. \00 battery shorted and bq27510 reset !
  251. \00\00\00bq27510 gas gause fail!
  252. \00\00\00\00no battery
  253. \00battery_temperature_very_hot = %d
  254. \00\00bq27510 gas gause fail=%d
  255. \00\00battery_capacity= %d
  256. \00\00ac charger plugin and power on directly :%d.
  257. \00\00battery_temperature less than -10 and more than 50
  258. \00charger plugout
  259. \00\00\00\00battery_volt= %d
  260. \00\00check_efuse: efuse_info[%d] is not 0
  261. \00\00\00check_efuse: efuse_info is 0
  262. \00\00\00polling: polling finished, bist_result: %x, retry_count: %d
  263. \00\00\00\00checking error:, bist_result: %x
  264. \00\00\00polling error: polling retry 200 times, bist_result: %x.
  265. \00\00\00run_all_bist_tests: result: %d
  266. \00write_efuse_data: efc_info_data is null!
  267. \00\00\00write_efuse_data: param efc_info_data is NULL
  268. \00\00%s: efuse0 has been written before!
  269. \00\00\00\00%s: efuse1 has been written before!
  270. \00\00\00\00write_efuse_data: time out
  271. \00write_efuse_data: BIST ERROR, state: %x.
  272. \00\00\00display_reg_data: entry
  273. \00\00\00\00EFUSE0_BUF0: 0x%x
  274. \00\00EFUSE0_BUF1: 0x%x
  275. \00\00EFUSE0_BUF2: 0x%x
  276. \00\00EFUSE0_BUF3: 0x%x
  277. \00\00EFUSE0_BUF4: 0x%x
  278. \00\00EFUSE0_BUF5: 0x%x
  279. \00\00EFUSE0_BUF6: 0x%x
  280. \00\00EFUSE0_BUF7: 0x%x
  281. \00\00
  282. \00\00\00EFUSE0_INFO0: 0x%x
  283. \00EFUSE0_INFO1: 0x%x
  284. \00EFUSE0_INFO2: 0x%x
  285. \00EFUSE0_INFO3: 0x%x
  286. \00EFUSE0_INFO4: 0x%x
  287. \00EFUSE0_INFO5: 0x%x
  288. \00EFUSE0_INFO6: 0x%x
  289. \00EFUSE0_INFO7: 0x%x
  290. \00EFUSE1_BUF0: 0x%x
  291. \00\00EFUSE1_BUF1: 0x%x
  292. \00\00EFUSE1_BUF2: 0x%x
  293. \00\00EFUSE1_BUF3: 0x%x
  294. \00\00EFUSE1_BUF4: 0x%x
  295. \00\00EFUSE1_BUF5: 0x%x
  296. \00\00EFUSE1_BUF6: 0x%x
  297. \00\00EFUSE1_BUF7: 0x%x
  298. \00\00EFUSE1_INFO0: 0x%x
  299. \00EFUSE1_INFO1: 0x%x
  300. \00EFUSE1_INFO2: 0x%x
  301. \00EFUSE1_INFO3: 0x%x
  302. \00write_efuse_data: efuse%d BIST OK, state: %x.
  303. \00\00efc_write entry
  304. \00\00\00\00enable clock OK!
  305. \00\00\00efc_write: efc0_data will be writting.
  306. \00efc_write: efc1_data will be writting.
  307. \00efc_write: hdmi_efc_data will be writting.
  308. \00hdmi_efc_info_data is null!
  309. \00\00\00\00write_hdmi_efuse_data: BIST OK, This HDMI efuse hasbeen written before! Now exit!
  310. \00\00write_hdmi_efuse_data: already programmed, state: 0x%x.
  311. \00\00\00\00Start to write HDMI efuse!
  312. \00write_hdmi_efuse_data: time out, h_efc_state: 0x%x:
  313. \00\00\00\00write_hdmi_efuse_data: BIST success!
  314. \00\00\00write_hdmi_efuse_data: BIST failed!
  315. \00\00\00\00efc_write: Exit Efuse write.
  316. \00\00\00secure_boot_create_secure_cmdline: null
  317. \00\00\00\00sb=\00secure_boot_create_secure_cmdline: orig length = %d
  318. \00\00\00\00 \00\00\00secure_boot_create_secure_cmdline: append secureboot cmd length = %d
  319. \00\00\00secure_boot_create_secure_cmdline: final length = %d
  320. \00\00\00secure_boot_create_secure_cmdline: secureboot_out_cmd = %s
  321. \00WVLOCK\00\00secure_boot_set_lockstate: nve_direct_access read error
  322. \00\00\00\00secure_boot_set_lockstate: the passwd is wrong ,please check it again!
  323. \00secure_boot_set_lockstate: unlock: secure_boot_crypt_hwaes error
  324. \00\00secure_boot_set_lockstate: unlocked
  325. \00\00\00secure_boot_set_lockstate: relock: secure_boot_crypt_hwaes error
  326. \00\00secure_boot_set_lockstate: relocked
  327. \00\00\00secure_boot_set_lockstate: lockstate error
  328. \00\00\00\00secure_boot_set_lockstate: sizeof(lock_info) = %d
  329. \00\00secure_boot_set_lockstate: nve_direct_access write error
  330. \00\00\00secure_boot_set_lockstate: OK!!!
  331. \00\00secure_boot_get_lockstate: nve_direct_access read error
  332. \00\00\00\00secure_boot_get_lockstate: secure_boot_crypt_hwaes error
  333. \00\00It's 3.0 SD card.
  334. \00\00[CSD1.0] sd card size is:%d MB
  335. \00[CSD2.0] sd card size is:%d MB
  336. \00Problem setting driver strength!
  337. \00\00\00Problem setting bus speed mode!
  338. \00\00\00\00Problem setting current limit!
  339. \00mmc_sd_init_uhs_card error
  340. \00mmc_set_signal_voltage ERROR!
  341. \00\00i2c read error chip_no = %x,reg = %x
  342. \00\00\00i2c write error chip_no = %x,reg = %x
  343. \00\00i2c read error chip_no = %x,reg = %x
  344. \00\00\00battery_temperature = %d
  345. \00\00\00i2c write error chip_no = %x,reg = %x
  346. \00\00secure_verify_image: ++
  347. \00\00\00secure_verify_image: err: param is NULL
  348. \00\00\00secure_verify_image: err: decrypt_verify_vtab
  349. \00secure_verify_image: item[%d]
  350. \00secure_verify_vitem: err: decrypt_calc_sha_start
  351. \00\00secure_verify_vitem: err: flash_read
  352. \00\00secure_verify_vitem: err: SECURE_BUF_LEN != bytes
  353. \00secure_verify_vitem: err: decrypt_calc_sha_run
  354. \00\00\00\00secure_verify_vitem: err: read_bytes < end_bytes
  355. \00\00secure_verify_vitem: err: decrypt_calc_sha_end
  356. \00\00\00\00secure_verify_vitem: err: decrypt_cmp_phash
  357. \00\00\00secure_verify_image: err: secure_verify_vitem
  358. \00secure_verify_image: --
  359. \00\00\00secure_boot_verify_total: ++
  360. \00\00secure boot: verify total token invalid
  361. \00\00\00secure_boot_verify_total: --
  362. \00\00secure_boot_verify_total: err: token_verify_total
  363. \00secure boot: verify total token valid
  364. \00secure_get_ptnvtab: ++
  365. \00\00\00\00secure_get_ptnvtab: info: the ptn has not vrl table (internal)
  366. \00\00\00\00secure_get_ptnvtab: --
  367. \00\00\00\00secure_get_ptnvtab: info: the ptn has not vrl table (end)
  368. \00secure_set_ptn_token: ++
  369. \00\00secure_set_ptn_token: invalid ptn
  370. \00secure_set_ptn_token: err: secure_get_ptnvtab
  371. \00secure_set_ptn_token: err: token_set_item
  372. \00secure set token OK
  373. \00\00\00secure_set_ptn_token: --
  374. \00\00secure_boot_skip_vtab: ++
  375. \00secure_boot_skip_vtab: err: param is NULL
  376. \00secure boot skip vtab: invalid vtab length
  377. \00\00\00\00SecVRLTableV1.1\00secure boot skip vtab: invalid MagicNum
  378. \00\00\00secure boot skip vtab: invalid data length
  379. \00\00\00\00secure boot skip vtab: valid vtab
  380. \00secure_boot_skip_vtab: --
  381. \00secure_boot_peel_vtab: ++
  382. \00secure_boot_peel_vtab: err: param is NULL
  383. \00secure_boot_peel_vtab: err: sizeof(VrlTable) > *length
  384. \00\00\00\00secure boot peel vtab: no vrl table
  385. \00\00\00secure boot peel vrl table: try to get old vrl table
  386. \00\00secure boot peel vtab: version err
  387. \00\00\00\00secure_boot_peel_vtab: err: vrl_flash_write_vtab
  388. \00\00secure boot peel vrl table OK
  389. \00secure_boot_peel_vtab: --
  390. \00secure clear token: invalid ptn
  391. \00\00\00secure_boot_clear_token: err: secure_get_ptnvtab
  392. \00\00secure_boot_clear_token: err: token_clr_item
  393. \00\00secure boot clear token OK
  394. \00\00\00\00secure_boot_clear_token: err: token_clr_total
  395. \00secure_boot_verify_flashimg: ++
  396. \00\00\00secure_check_ptnvtab: vrl table address != ptn address
  397. \00\00\00\00secure_boot_verify_flashimg: err: secure_check_ptnvtab
  398. \00\00\00\00secure_boot_verify_flashimg: err: secure_verify_image
  399. \00secure boot verify flash image OK
  400. \00secure_boot_verify_flashimg: --
  401. \00\00\00secure_boot_verify_loadimg: ++
  402. \00\00\00\00secure_boot_verify_loadimg: err: the ptn has not vrl table
  403. \00\00\00\00secure_boot_verify_loadimg: err: secure_get_ptnvtab
  404. \00\00\00secure_boot_verify_loadimg: err: secure_verify_image
  405. \00\00secure boot verify loading image OK
  406. \00\00\00secure_boot_verify_loadimg: --
  407. \00\00\00\00secure_clear_vtabaddr_token: ++
  408. \00\00\00secure_clear_vtabaddr_token: err: token_clr_item
  409. \00\00secure clear token OK
  410. \00secure_clear_vtabaddr_token: err: token_clr_total
  411. \00secure_clear_vtabaddr_token: --
  412. \00\00\00secure_boot_verify_system: ++
  413. \00secure boot verify system: begin No. = 0x%x
  414. \00\00\00secure boot verify system: vrl table invalid
  415. \00\00secure_boot_verify_system: err: vrl_flash_get_vtab
  416. \00\00\00\00secure boot verify system: verify image invalid
  417. \00\00\00secure_boot_verify_system: err: token_set_item
  418. \00\00\00\00secure boot verify system: end No. = 0x%x
  419. \00secure_boot_verify_system: err: SEC_NEXT_VTAB_NULL != vtab_nv_addr
  420. \00\00\00\00secure boot verify system OK
  421. \00\00secure_boot_verify_system: --
  422. \00secure boot: check total token invalid
  423. \00\00\00\00secure_boot_check_total: err: token_check_total
  424. \00\00\00secure boot: check total token valid
  425. \00\00secure_boot_verify_fastboot2: ++
  426. \00\00secure_boot_verify_fastboot2: vrl_flash_check_vitem
  427. \00\00\00secure_boot_verify_fastboot2: decrypt_verify_vitem
  428. \00\00\00\00secure boot: verify fastboot OK
  429. \00\00\00secure_boot_verify_fastboot2: --
  430. \00\00secure boot: hold system
  431. \00\00secure_boot_deinit failure
  432. \00\00\00\00secure boot: deinit OK
  433. \00\00\00\00secure boot: hold system no disp
  434. \00\00secure_boot_init: vrl_flash_init
  435. \00\00secure_boot_init: token_flash_init
  436. \00\00\00\00secure_boot_init: decrypt_init
  437. \00\00\00\00secure_boot_init: token_init
  438. \00\00secure_boot_init: secure_init
  439. \00secure boot: init OK
  440. \00\00secure boot: reset OK
  441. \00endecrypt_usrkey_aes: err ssdma_run_aes!
  442. \00\00decrypt_calc_sha_run: err: param is NULL
  443. \00\00decrypt_calc_sha_run: err: length % DECRYPT_SEGLEN_SHA
  444. \00\00\00\00decrypt_calc_sha_run: err: ssdma_run
  445. \00\00decrypt_cmp_phash: ASSERT
  446. \00h1[%d]=%x h2[%d]=%x
  447. \00\00\00decrypt_cmp_phash: err
  448. \00\00\00\00crypt_aes time over!
  449. \00\00crypt_aes: err: e key in ssdma_set_key2ip
  450. \00crypt_aes: err ssdma_set_aesmode!
  451. \00crypt_aes: err: e key in ssdma_set_aesiv
  452. \00\00decrypt_deinit: ssdma_init
  453. \00\00\00\00decrypt_calc_sha_end: Param is NULL
  454. \00\00\00decrypt_calc_sha_end: err: ssdma_run
  455. \00\00decrypt_calc_sha_end: error ssdma_sha_run
  456. \00decrypt_calc_sha_end: err: ssdma_sha_run
  457. \00\00decrypt_calc_sha_start: err: param is NULL
  458. \00\00\00\00decrypt_calc_sha_start: err: ssdma_sha_init
  459. \00\00\00decrypt_calculate_sha: ASSERT
  460. \00decrypt_calculate_sha: ssdma_sha_init
  461. \00decrypt_calculate_sha: ssdma_run
  462. \00\00decrypt_calculate_sha: ssdma_sha_run2
  463. \00decrypt_calculate_sha: ssdma_sha_run3
  464. \00decrypt_verify_vitem: ASSERT
  465. \00\00decrypt_verify_vitem: decrypt_calculate_sha
  466. \00\00\00decrypt_verify_vitem: decrypt_cmp_phash
  467. \00\00\00decrypt_verify_vtab: err: param is NULL
  468. \00\00\00decrypt_verify_vtab: image vrl len incorrect
  469. \00\00decrypt_verify_vtab: err: DECRYPT_VTAB_SHA_DATA_LEN != pvtabboot->VrlItemTab.Length
  470. \00\00\00SecVRLTableV1.1\00decrypt_verify_vtab: err: pvtabimage->MagicNum, DECRYPT_VTAB_MAGIC_NUM
  471. \00\00\00\00decrypt_verify_vtab: err: pvtabboot->MagicNum, DECRYPT_VTAB_MAGIC_NUM
  472. \00decrypt_decrypt_sign: err: key len > DECRYPT_RSA_KEYLEN_MAX
  473. \00\00\00decrypt_decrypt_sign: err: ssdma_rsa_init
  474. \00decrypt_decrypt_sign: err: n key ssdma_set_key2ip
  475. \00decrypt_decrypt_sign: err: e key in ssdma_set_key2ip
  476. \00\00decrypt_decrypt_sign: err: ssdma_rsa_run
  477. \00\00decrypt_verify_vtab: err: decrypt_decrypt_sign
  478. \00\00\00\00decrypt_verify_vtab: err: decrypt_calculate_sha
  479. \00\00\00vrl_flash_get_bufnum: err: param is NULL
  480. \00\00vrl_flash_get_unitid_from_addr: err: param is NULL
  481. \00\00\00\00vrl_flash_get_unitid_from_addr: err: SEC_IMG_COUNT_MAX <= *punitid
  482. \00\00\00\00vrl_flash_get_unitid_from_vtab: err: param is NULL
  483. \00\00\00\00vrl_flash_get_unitid_from_vtab: err: SEC_IMG_COUNT_MAX <= *punitid
  484. \00\00\00\00vrl_flash_check_vitem: ASSERT
  485. \00vrl_flash_make_imageptn: err: param is NULL
  486. \00\00\00vrl_flash_make_imageptn: err: vrl_flash_check_vitem
  487. \00\00\00vrl_flash_check_vtabaddr: err: addr
  488. \00\00\00vrl_flash_check_vtabaddr: err: offset
  489. \00vrl_flash_write_vtab: err: vrl_flash_check_vtabaddr
  490. \00\00\00vrl_flash_write_vtab: err: p flash_write
  491. \00\00vrl_flash_write_vtab: err: m flash_write
  492. \00\00vrl_flash_get_vtab: err: vrl_flash_restore_vtab
  493. \00\00\00vrl_flash_get_vtab: err: vrl_flash_read_vtab
  494. \00\00sec_vtab_p\00\00sec_vtab_m\00\00token_flash_erase: memset size %d
  495. \00token_flash_erase: flash_write
  496. \00\00\00\00write token table: WriteID = 0x%x; position = %d
  497. \00\00token_flash_write_vtab: error flash_write
  498. \00token_flash_read_ttab: err: flash_read
  499. \00\00\00\00token_flash_read_ttab: err: flash_read_bytes != sizeof(TokenTable)
  500. \00\00\00\00sec_token\00\00\00token_check_total: err: token_flash_read_ttab
  501. \00token_check_total: err: decrypt_calc_sha_start
  502. \00\00\00\00token_check_total: err: decrypt_calc_sha_run
  503. \00\00token_check_total: err: decrypt_calc_sha_end
  504. \00\00token check total: invalid
  505. \00\00\00\00token check total: valid
  506. \00\00token_clr_total: err: token_flash_read_ttab()
  507. \00token_clr_total: err: token_flash_write_ttab()
  508. \00\00\00\00token clr total OK
  509. \00\00\00\00token_clr_item: err: param is NULL
  510. \00\00\00\00token_clr_item: vrl_flash_get_unitid_from_vtab
  511. \00\00\00\00token_clr_item: token_flash_read_ttab
  512. \00token_clr_item: token_flash_write_ttab
  513. \00\00\00\00token clr item OK
  514. \00token_verify_total: err: token_flash_read_ttab
  515. \00\00\00\00token_verify_total: err: token_clr_total
  516. \00\00token verify total: invalid
  517. \00\00\00token_verify_total: err: vrl_flash_get_unitid_from_vtab
  518. \00\00\00token verify total: id = 0x%x
  519. \00\00\00\00token_verify_total: err: token_clr_item
  520. \00\00\00token_verify_total: err: SEC_NEXT_VTAB_NULL != vtab_nv_addr
  521. \00\00\00token verify total: valid (same as previous total)
  522. \00\00\00\00token_set_total: err: token_flash_read_ttab
  523. \00\00\00token_set_total: err: decrypt_calc_sha_start
  524. \00\00token_set_total: err: decrypt_calc_sha_run
  525. \00\00\00\00token_set_total: err: decrypt_calc_sha_end
  526. \00\00\00\00token_set_total: err: token_flash_write_ttab
  527. \00\00token set total OK
  528. \00\00\00\00token verify total: valid
  529. \00token_verify_total: err: token_set_total
  530. \00\00token_set_item: err: param is NULL
  531. \00\00\00\00token_set_item: err: vrl_flash_get_unitid_from_vtab
  532. \00\00\00token_set_item: err: token_flash_read_ttab
  533. \00\00\00\00token set item OK (same as previous token)
  534. \00\00\00\00token_set_item: err: token_flash_write_ttab
  535. \00\00\00token set item OK
  536. \00ssdma_test_bits_same: err
  537. \00ssdma_rsa_run: err: pc/pm/pr is NULL
  538. \00\00ssdma_rsa_run: err: run error
  539. \00ssdma_rsa_init: err: busy
  540. \00ssdma_sha_run: ASSERT
  541. \00ssdma_sha_run: err: busy
  542. \00\00ssdma_sha_run: ssdma_test_bits_same
  543. \00\00\00ssdma_sha_set_iv: ASSERT
  544. \00\00ssdma_sha_init: err: busy
  545. \00ssdma_run: ASSERT
  546. \00ssdma_run: ssdma_test_bits_same
  547. \00\00\00ssdma_aes_run: Input param error
  548. \00\00ssdma_aes_set_iv: Input param error
  549. \00\00\00ssdma_aes_init: err: busy
  550. \00ssdma_set_key2ip: err: pkey is NULL
  551. \00\00\00ssdma_set_key2ip: err: target error
  552. \00\00\00ssdma_set_key2ip: pivin is NULL
  553. \00\00\00ssdma_set_key2ip: err: decrypt key error
  554. \00\00ssdma_set_key2ip: err: gen internal key error
  555. \00ssdma_set_key2ip: err: type error
  556. \00Initial SSDMA Failure
  557. \00(null)\00\00header error.
  558. \00oeminfo\00can't find oeminfo
  559. \00\00\00\00read oeminfo header fail
  560. \00\00\00read oeminfo fail
  561. \00\00no logo(index %d).
  562. \00\00\00\00logo data is error.(index %d).
  563. \00\00\00\00parse_bitmap error.
  564. \00\00\00unsupported bmp bit config %d.
  565. \00\00\00\00k3fb, %s: NO payload error
  566. \00k3fb, %s: dtype=%x NOT supported
  567. \00\00\00k3fb, %s: Unsurport the value of PLL loop divider ratio (M) (%d)!\00\00\00k3fb, %s: Unsurport this range(%d)!\00arch/arch_type\00\00battery/battery_type\00\00\00\00keypad/keypad_type\00\00lcd/lcd_type\00\00\00\00--error
  568. \00\00\00\00unknow boardi_id = 0x%x
  569. \00\00\00\00MHL/chip_name\00\00\00none\00\00\00\00arch/arch_type\00\00audio/audience\00\00NONE\00\00\00\00audio/digital_mic\00\00\00audio/dual_mic\00\00audio/hs_keys\00\00\00audio/hs_pa\00TPA6132\00audio/hsd_invert\00\00\00\00audio/ril_type\00\00USE\00audio/spk_pa\00\00\00\00TPA2028\00audio/spk_route\00LINEOUT_LR\00\00battery/battery_type\00\00\00\00board/board_type\00\00\00\00camera/camera_timing_type\00\00\00camera/faceIgnoreCount\00\00camera/primary_sensor\00\00\00camera/secondary_sensor\00gas_gauge/charge_current\00\00\00\00gas_gauge/charge_voltage\00\00\00\00gas_gauge/firmware_name\00BQ27510_LG_1800\00gas_gauge/version\00\00\00iomux/iomux_type\00\00\00\00keypad/keypad_type\00\00lcd/lcd_type\00\00\00\00product/name\00\00\00\00U9508\00\00\00sensor/sensor_type\00\00touchscreen/touchscreen_type\00\00\00\00usbphy/usbphy_type\00\00ES305\00\00\00LINEOUT_L\00\00\00BQ27510_GUANGYU_1670\00\00\00\00U9510\00\00\00vdcs_k3oem\00\00BOOST5V\00CS_U9510_VC\00vccs_k3oem\00\00SPK\00vacs_k3oem\00\00k3oem\00\00\00U9510D\00\00CS_U9510\00\00\00\00BQ27510_GUANGYU_2600\00\00\00\00U9510E\00\00\F0\E5L\F0\E5\C8\CE\00\F0\E5To\00\F0\E5tu\00\F0\E5\00\00\F0\E5tk\00\F0\E5\00\00\00\F0\E5\EC6\00\F0\E5\DCc\00\F0\E5\5\00\F0\E5\84
  570. \00\F0\E54o\00\F0\E5\80\00\F0\E5t\80\00\F0\E5X\B1\00\F0\E54\A8\00\F0\E5\E8'\00\F0\E5P\AD\00\F0\E5\E8\AA\00\F0匬\00\F0帯\00\F0\E5\F0\A4\00\F0\E5X~\00\F0\E5D
  571. \F0\E5(\E4\00\AC\F5\00\F80\FE\00\F8 \FE\00\F8|\9E\F4\FD\00\F8\D0\FC\00\F8\D4\FC\00\F8\D8\FC\00\F8\DC\FC\00\F8\F8\FD\00\F8\8C\F5\00\F8\CC\FC\00\F8\ECs\F4s\F0s\00\FE\00\F8\FC\FD\00\F8h\F6\00\F8\t\F8s\FE\00\F8\98\00\F8\E8\97\00\F8\00\98\00\F8\FE\00\F8\98H\00\C0\FC\00\F8$tx\F6\00\F8ltltl|l\8Cl\84|\F6\00\F8\F8C\00\F8\A0\9Cl\94\80\9E؞\9E\AC\ADt\9Ex\9E\88\B9\00\00\00\00\00\00\00\00\00\00\00\00serialv1.0\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\002.0\00\00\00\00\00coldboot\00\00\00\00\00\00\00\00\00\00\00bootloader\00\00\00\00\00\00\00\00\00recovery\00\00\00\00\00\00\00\00\00\00\00resetfactory\00\00\00\00\00\00\00resetuser\00\00\00\00\00\00\00\00\00\00sdupdate\00\00\00\00\00\00\00\00\00\00\00oem_rtc\00\00\00\00\00\00\00\00\00\00\00\00usbupdate\00\00\00\00\00\00\00 \00\00\00panic\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\F4\F4\C8\00\00\00\000\F8fastboot\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00efi\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00xloader\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00round\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00nvme\00\00\00\00\00\00\00\00\00\00\00\00\00 \00\00\00 \00\00\00\00\00\00misc\00\00\00\00\00\00\00\00\00\00\00\00\00@\00\00\00 \00\00\00\00\00\00splash\00\00\00\00\00\00\00\00\00\00\00`\00\00\00@\00\00\00\00\00\00oeminfo\00\00\00\00\00\00\00\00\00\00\A0\00\00\00\00\00\00\00\00\00reserved1\00\00\00\00\00\00\00\00\A0\00\000\00\00\00\00\00\00sec_vtab_p\00\00\00\00\00\00\00\D0\00\00\00\00\00\00\00\00sec_vtab_m\00\00\00\00\00\00\00\D4\00\00\00\00\00\00\00\00sec_token\00\00\00\00\00\00\00\00\D8\00\00\00\00\00\00\00\00sec_info\00\00\00\00\00\00\00\00\00\DC\00\00\00\00\00\00\00\00reserved2\00\00\00\00\00\00\00\00\E0\00\00@\00\00\00\00\00\00recovery2\00\00\00\00\00\00\00\00 \00\00@\00\00\00\00\00\00recovery\00\00\00\00\00\00\00\00\00`\00\00@\00\00\00\00\00\00boot\00\00\00\00\00\00\00\00\00\00\00\00\00\A0\00\00@\00\00\00\00\00\00modemimage\00\00\00\00\00\00\00\E0\00\00\00\00\00\00\00\00modemnvm1\00\00\00\00\00\00\00\00\E0\00\00@\00\00\00\00\00\00modemnvm2\00\00\00\00\00\00\00\00 \00\00@\00\00\00\00\00\00system\00\00\00\00\00\00\00\00\00\00\00`\00\00\00\00\00\00\00\00cache\00\00\00\00\00\00\00\00\00\00\00\00` \00\00\00\00\00\00\00\00cust\00\00\00\00\00\00\00\00\00\00\00\00\00`(\00\00\00\00\00\00\00\00userdata\00\00\00\00\00\00\00\00\00`8\00\00
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!