Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Copyright (c) 1992-2012 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 9.1-RELEASE-p3 #7: Mon May 13 22:39:35 EEST 2013
- root@beastie.local.lan:/usr/obj/usr/src/sys/BEASTIE amd64
- CPU: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (3400.10-MHz K8-class CPU)
- Origin = "GenuineIntel" Id = 0x306a9 Family = 6 Model = 3a Stepping = 9
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x7f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
- AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
- AMD Features2=0x1<LAHF>
- TSC: P-state invariant, performance statistics
- real memory = 8589934592 (8192 MB)
- avail memory = 7936126976 (7568 MB)
- Event timer "LAPIC" quality 600
- ACPI APIC Table: <ALASKA A M I>
- FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
- FreeBSD/SMP: 1 package(s) x 4 core(s)
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 2
- cpu2 (AP): APIC ID: 4
- cpu3 (AP): APIC ID: 6
- ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110527/tbfadt-320)
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- kbd1 at kbdmux0
- ctl: CAM Target Layer loaded
- acpi0: <ALASKA A M I> on motherboard
- acpi0: Power Button (fixed)
- acpi0: reservation of 67, 1 (4) failed
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- cpu2: <ACPI CPU> on acpi0
- cpu3: <ACPI CPU> on acpi0
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Event timer "HPET" frequency 14318180 Hz quality 550
- Event timer "HPET1" frequency 14318180 Hz quality 440
- Event timer "HPET2" frequency 14318180 Hz quality 440
- Event timer "HPET3" frequency 14318180 Hz quality 440
- Event timer "HPET4" frequency 14318180 Hz quality 440
- atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
- atrtc0: Warning: Couldn't map I/O.
- Event timer "RTC" frequency 32768 Hz quality 0
- attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
- xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7c00000-0xf7c0ffff irq 16 at device 20.0 on pci0
- xhci0: 32 byte context size.
- usbus0 on xhci0
- pci0: <simple comms> at device 22.0 (no driver attached)
- ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7c14000-0xf7c143ff irq 16 at device 26.0 on pci0
- usbus1: EHCI version 1.0
- usbus1 on ehci0
- pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
- pci2: <ACPI PCI bus> on pcib2
- pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
- pci3: <ACPI PCI bus> on pcib3
- pci3: <multimedia, audio> at device 1.0 (no driver attached)
- pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
- pci4: <ACPI PCI bus> on pcib4
- re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 17 at device 0.0 on pci4
- re0: Using 1 MSI-X message
- re0: Chip rev. 0x2c800000
- re0: MAC rev. 0x00000000
- miibus0: <MII bus> on re0
- rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
- rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
- re0: Ethernet address: bc:5f:f4:6d:ff:16
- ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7c13000-0xf7c133ff irq 23 at device 29.0 on pci0
- usbus2: EHCI version 1.0
- usbus2 on ehci1
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7c12000-0xf7c127ff irq 19 at device 31.2 on pci0
- ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
- ahcich0: <AHCI channel> at channel 0 on ahci0
- ahcich1: <AHCI channel> at channel 1 on ahci0
- ahcich2: <AHCI channel> at channel 2 on ahci0
- ahcich3: <AHCI channel> at channel 3 on ahci0
- ahcich4: <AHCI channel> at channel 4 on ahci0
- ahcich5: <AHCI channel> at channel 5 on ahci0
- pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
- acpi_button0: <Power Button> on acpi0
- uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- ppc0: cannot reserve I/O port range
- coretemp0: <CPU On-Die Thermal Sensors> on cpu0
- est0: <Enhanced SpeedStep Frequency Control> on cpu0
- p4tcc0: <CPU Frequency Thermal Control> on cpu0
- coretemp1: <CPU On-Die Thermal Sensors> on cpu1
- est1: <Enhanced SpeedStep Frequency Control> on cpu1
- p4tcc1: <CPU Frequency Thermal Control> on cpu1
- coretemp2: <CPU On-Die Thermal Sensors> on cpu2
- est2: <Enhanced SpeedStep Frequency Control> on cpu2
- p4tcc2: <CPU Frequency Thermal Control> on cpu2
- coretemp3: <CPU On-Die Thermal Sensors> on cpu3
- est3: <Enhanced SpeedStep Frequency Control> on cpu3
- p4tcc3: <CPU Frequency Thermal Control> on cpu3
- Timecounters tick every 1.000 msec
- usbus0: 5.0Gbps Super Speed USB v3.0
- usbus1: 480Mbps High Speed USB v2.0
- usbus2: 480Mbps High Speed USB v2.0
- ugen0.1: <0x8086> at usbus0
- uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
- ugen1.1: <Intel> at usbus1
- uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
- ugen2.1: <Intel> at usbus2
- uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
- uhub0: 8 ports with 8 removable, self powered
- uhub1: 2 ports with 2 removable, self powered
- uhub2: 2 ports with 2 removable, self powered
- ugen1.2: <vendor 0x8087> at usbus1
- uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
- ugen2.2: <vendor 0x8087> at usbus2
- uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
- uhub3: 6 ports with 6 removable, self powered
- uhub4: 8 ports with 8 removable, self powered
- ugen2.3: <Microsoft> at usbus2
- ukbd0: <Microsoft Microsoft SiderWinderTM X6 Keyboard, class 0/0, rev 2.00/2.60, addr 3> on usbus2
- kbd2 at ukbd0
- uhid0: <Microsoft Microsoft SiderWinderTM X6 Keyboard, class 0/0, rev 2.00/2.60, addr 3> on usbus2
- ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
- ada0: <Samsung SSD 840 Series DXT08B0Q> ATA-9 SATA 3.x device
- ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- ada0: Command Queueing enabled
- ada0: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C)
- ada0: Previously was known as ad4
- ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
- ada1: <SAMSUNG HD103SJ 1AJ10001> ATA-8 SATA 2.x device
- ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada1: Command Queueing enabled
- ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
- ada1: Previously was known as ad8
- ada2 at ahcich3 bus 0 scbus3 target 0 lun 0
- ada2: <WDC WD20EARS-00MVWB0 51.0AB51> ATA-8 SATA 2.x device
- ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada2: Command Queueing enabled
- ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
- ada2: Previously was known as ad10
- cd0 at ahcich4 bus 0 scbus4 target 0 lun 0
- cd0: <TSSTcorp CDDVDW SH-222AL SB00> Removable CD-ROM SCSI-0 device
- cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
- cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
- SMP: AP CPU #2 Launched!
- SMP: AP CPU #1 Launched!
- SMP: AP CPU #3 Launched!
- Timecounter "TSC-low" frequency 13281626 Hz quality 1000
- Root mount waiting for: usbus2
- ugen2.4: <Logitech> at usbus2
- ums0: <Logitech product 0xc245, class 0/0, rev 2.00/69.00, addr 4> on usbus2
- ums0: 8 buttons and [XYZ] coordinates ID=0
- uhid1: <Logitech product 0xc245, class 0/0, rev 2.00/69.00, addr 4> on usbus2
- Trying to mount root from ufs:/dev/gpt/ssdrootfs [rw]...
- fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.19
- oss_audigyls0: <AudigyLS> port 0xe000-0xe01f irq 17 at device 1.0 on pci3
- agp0: <IvyBridge desktop GT2 IG> on vgapci0
- agp0: aperture size is 256M, detected 262140k stolen memory
- drmn0: <Intel IvyBridge> on vgapci0
- info: [drm] MSI enabled 1 message(s)
- info: [drm] AGP at 0xe0000000 256MB
- iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
- iic0: <I2C generic I/O> on iicbus0
- iic1: <I2C generic I/O> on iicbus1
- iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
- iic2: <I2C generic I/O> on iicbus2
- iic3: <I2C generic I/O> on iicbus3
- iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
- iic4: <I2C generic I/O> on iicbus4
- iic5: <I2C generic I/O> on iicbus5
- iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
- iic6: <I2C generic I/O> on iicbus6
- iic7: <I2C generic I/O> on iicbus7
- iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
- iic8: <I2C generic I/O> on iicbus8
- iic9: <I2C generic I/O> on iicbus9
- iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
- iic10: <I2C generic I/O> on iicbus10
- iic11: <I2C generic I/O> on iicbus11
- iicbus12: <Philips I2C bus> on iicbb6 addr 0xff
- iic12: <I2C generic I/O> on iicbus12
- iic13: <I2C generic I/O> on iicbus13
- iicbus14: <Philips I2C bus> on iicbb7 addr 0xff
- iic14: <I2C generic I/O> on iicbus14
- iic15: <I2C generic I/O> on iicbus15
- info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- info: [drm] Driver supports precise vblank timestamp query.
- [drm:KMS:pid965:intel_detect_pch] Found PatherPoint PCH
- [drm:KMS:pid965:init_vbt_defaults] Set default to SSC at 100MHz
- [drm:KMS:pid965:intel_parse_bios] Using VBT from OpRegion: $VBT SNB/IVB-DESKTOPd
- [drm:KMS:pid965:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0
- [drm:KMS:pid965:parse_general_definitions] crt_ddc_bus_pin: 2
- [drm:KMS:pid965:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
- [drm:KMS:pid965:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
- [drm:KMS:pid965:parse_sdvo_device_mapping] No SDVO device info is found in VBT
- [drm:KMS:pid965:intel_init_display] Using MT version of forcewake
- [drm:KMS:pid965:intel_modeset_init] 3 display pipes available.
- [drm:KMS:pid965:intel_lvds_init] LVDS is not present in VBT
- [drm:KMS:pid965:intel_crt_init] pch crt adpa set to 0x80f40010
- [drm:KMS:pid965:intel_setup_outputs] HDMIB 0 PCH_DP_B 0 HDMIC 1 HDMID 1 PCH_DP_C 1 PCH_DP_D 1 LVDS 0
- [drm:KMS:pid965:intel_dp_i2c_init] i2c_init DPDDC-C
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_i2c_aux_ch] aux_ch failed -60
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_i2c_aux_ch] aux_ch failed -60
- [drm:KMS:pid965:intel_dp_i2c_init] i2c_init DPDDC-D
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_i2c_aux_ch] aux_ch failed -60
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_i2c_aux_ch] aux_ch failed -60
- [drm:KMS:pid965:ironlake_crtc_dpms] crtc 0/0 dpms off
- [drm:KMS:pid965:intel_update_fbc]
- [drm:KMS:pid965:ironlake_crtc_dpms] crtc 1/1 dpms off
- [drm:KMS:pid965:intel_update_fbc]
- [drm:KMS:pid965:ironlake_crtc_dpms] crtc 2/2 dpms off
- [drm:KMS:pid965:intel_update_fbc]
- [drm:KMS:pid965:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_pch_edp 0 has_cpu_edp 0 has_ck505 0
- [drm:KMS:pid965:ironlake_init_pch_refclk] Disabling SSC entirely
- drmn0: taking over the fictitious range 0xe0000000-0xf0000000
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
- [drm:KMS:pid965:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x3f40010
- [drm:KMS:pid965:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x3f40010, result 1
- [drm:KMS:pid965:intel_crt_detect] CRT detected via hotplug
- [drm:KMS:pid965:drm_edid_to_eld] ELD: no CEA Extension found
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] probed modes :
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 28:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 25:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 27:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 26:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 29:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 32:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 22:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 30:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 23:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 24:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:12:HDMI-A-1]
- info: [drm] GMBUS timed out, falling back to bit banging on pin 4 [gmbus bus dpc]
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
- [drm:KMS:pid965:intel_hdmi_detect] [CONNECTOR:12:HDMI-A-1] got no edid, ddc port 4
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:12:HDMI-A-1] disconnected
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:16:HDMI-A-2]
- info: [drm] GMBUS timed out, falling back to bit banging on pin 7 [gmbus bus dpd]
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
- [drm:KMS:pid965:intel_hdmi_detect] [CONNECTOR:16:HDMI-A-2] got no edid, ddc port 7
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:16:HDMI-A-2] disconnected
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:17:DP-1]
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:17:DP-1] disconnected
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2]
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2] disconnected
- [drm:KMS:pid965:drm_setup_crtcs]
- [drm:KMS:pid965:drm_enable_connectors] connector 9 enabled? yes
- [drm:KMS:pid965:drm_enable_connectors] connector 12 enabled? no
- [drm:KMS:pid965:drm_enable_connectors] connector 16 enabled? no
- [drm:KMS:pid965:drm_enable_connectors] connector 17 enabled? no
- [drm:KMS:pid965:drm_enable_connectors] connector 19 enabled? no
- [drm:KMS:pid965:drm_target_preferred] looking for cmdline mode on connector 9
- [drm:KMS:pid965:drm_target_preferred] looking for preferred mode on connector 9
- [drm:KMS:pid965:drm_target_preferred] found mode 1680x1050
- [drm:KMS:pid965:drm_setup_crtcs] picking CRTCs for 8192x8192 config
- [drm:KMS:pid965:drm_setup_crtcs] desired mode 1680x1050 set on crtc 3
- [drm:KMS:pid965:intelfb_create] allocated 1680x1050 fb: 0x00064000, bo 0xfffffe00075fd400
- info: [drm] Initialized i915 1.6.0 20080730
- [drm:KMS:pid965:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[5]
- [drm:KMS:pid965:i915_getparam] Unknown parameter 19
- [drm:KMS:pid965:i915_getparam] Unknown parameter 21
- [drm:KMS:pid965:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[5]
- [drm:KMS:pid965:drm_mode_getresources] [CRTC:3]
- [drm:KMS:pid965:drm_mode_getresources] [CRTC:5]
- [drm:KMS:pid965:drm_mode_getresources] [CRTC:7]
- [drm:KMS:pid965:drm_mode_getresources] [ENCODER:10:DAC-10]
- [drm:KMS:pid965:drm_mode_getresources] [ENCODER:11:TMDS-11]
- [drm:KMS:pid965:drm_mode_getresources] [ENCODER:15:TMDS-15]
- [drm:KMS:pid965:drm_mode_getresources] [ENCODER:18:TMDS-18]
- [drm:KMS:pid965:drm_mode_getresources] [ENCODER:20:TMDS-20]
- [drm:KMS:pid965:drm_mode_getresources] [CONNECTOR:9:VGA-1]
- [drm:KMS:pid965:drm_mode_getresources] [CONNECTOR:12:HDMI-A-1]
- [drm:KMS:pid965:drm_mode_getresources] [CONNECTOR:16:HDMI-A-2]
- [drm:KMS:pid965:drm_mode_getresources] [CONNECTOR:17:DP-1]
- [drm:KMS:pid965:drm_mode_getresources] [CONNECTOR:19:DP-2]
- [drm:KMS:pid965:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[5]
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:9:?]
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
- [drm:KMS:pid965:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x3f40010, result 1
- [drm:KMS:pid965:intel_crt_detect] CRT detected via hotplug
- [drm:KMS:pid965:drm_edid_to_eld] ELD: no CEA Extension found
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] probed modes :
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 24:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 29:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 26:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 22:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 23:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 30:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 27:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 25:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 32:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 28:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:9:?]
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:12:?]
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:12:HDMI-A-1]
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
- [drm:KMS:pid965:intel_hdmi_detect] [CONNECTOR:12:HDMI-A-1] got no edid, ddc port 4
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:12:HDMI-A-1] disconnected
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:12:?]
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:12:HDMI-A-1]
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
- [drm:KMS:pid965:intel_hdmi_detect] [CONNECTOR:12:HDMI-A-1] got no edid, ddc port 4
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:12:HDMI-A-1] disconnected
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:16:?]
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:16:HDMI-A-2]
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
- [drm:KMS:pid965:intel_hdmi_detect] [CONNECTOR:16:HDMI-A-2] got no edid, ddc port 7
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:16:HDMI-A-2] disconnected
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:16:?]
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:16:HDMI-A-2]
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
- [drm:KMS:pid965:intel_hdmi_detect] [CONNECTOR:16:HDMI-A-2] got no edid, ddc port 7
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:16:HDMI-A-2] disconnected
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:17:?]
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:17:DP-1]
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:17:DP-1] disconnected
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:17:?]
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:17:DP-1]
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:17:DP-1] disconnected
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:19:?]
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2]
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2] disconnected
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:19:?]
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2]
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2] disconnected
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:9:?]
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
- [drm:KMS:pid965:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x3f40010, result 1
- [drm:KMS:pid965:intel_crt_detect] CRT detected via hotplug
- [drm:KMS:pid965:drm_edid_to_eld] ELD: no CEA Extension found
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] probed modes :
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 24:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 25:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 26:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 30:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 27:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 29:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 23:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 28:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 22:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 32:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:9:?]
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:12:?]
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:12:HDMI-A-1]
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
- [drm:KMS:pid965:intel_hdmi_detect] [CONNECTOR:12:HDMI-A-1] got no edid, ddc port 4
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:12:HDMI-A-1] disconnected
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:12:?]
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:12:HDMI-A-1]
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
- [drm:KMS:pid965:intel_hdmi_detect] [CONNECTOR:12:HDMI-A-1] got no edid, ddc port 4
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:12:HDMI-A-1] disconnected
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:16:?]
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:16:HDMI-A-2]
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
- [drm:KMS:pid965:intel_hdmi_detect] [CONNECTOR:16:HDMI-A-2] got no edid, ddc port 7
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:16:HDMI-A-2] disconnected
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:16:?]
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:16:HDMI-A-2]
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
- [drm:KMS:pid965:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
- [drm:KMS:pid965:intel_hdmi_detect] [CONNECTOR:16:HDMI-A-2] got no edid, ddc port 7
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:16:HDMI-A-2] disconnected
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:17:?]
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:17:DP-1]
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:17:DP-1] disconnected
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:17:?]
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:17:DP-1]
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:17:DP-1] disconnected
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:19:?]
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2]
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2] disconnected
- [drm:KMS:pid965:drm_mode_getconnector] [CONNECTOR:19:?]
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2]
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid965:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-2] disconnected
- [drm:KMS:pid965:drm_mode_addfb] [FB:35]
- [drm:KMS:pid965:drm_mode_setcrtc] [CRTC:3]
- [drm:KMS:pid965:drm_mode_setcrtc] [CONNECTOR:9:VGA-1]
- [drm:KMS:pid965:drm_crtc_helper_set_config]
- [drm:KMS:pid965:drm_crtc_helper_set_config] [CRTC:3] [FB:35] #connectors=1 (x y) (0 0)
- [drm:KMS:pid965:drm_crtc_helper_set_config] crtc has no fb, full mode set
- [drm:KMS:pid965:drm_crtc_helper_set_config] modes are different, full mode set
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 36:"1680x1050" 0 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x0 0x6
- [drm:KMS:pid965:drm_crtc_helper_set_config] encoder changed, full mode switch
- [drm:KMS:pid965:drm_crtc_helper_set_config] crtc changed, full mode switch
- [drm:KMS:pid965:drm_crtc_helper_set_config] [CONNECTOR:9:VGA-1] to [CRTC:3]
- [drm:KMS:pid965:drm_crtc_helper_set_config] attempting to set mode from userspace
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 36:"1680x1050" 0 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x0 0x6
- [drm:KMS:pid965:drm_crtc_helper_set_mode] [CRTC:3]
- [drm:KMS:pid965:intel_choose_pipe_bpp_dither] setting pipe bpc to 8 (max display bpc 8)
- [drm:KMS:pid965:ironlake_crtc_mode_set] Mode for pipe 0:
- [drm:KMS:pid965:drm_mode_debug_printmodeline] Modeline 36:"1680x1050" 0 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x0 0x6
- [drm:KMS:pid965:intel_wait_for_vblank] vblank wait timed out
- [drm:KMS:pid965:ironlake_update_plane] Writing base 0071F000 00000000 0 0 7168
- [drm:KMS:pid965:intel_update_fbc]
- [drm:KMS:pid965:sandybridge_update_wm] FIFO watermarks For pipe A - plane 13, cursor: 6
- [drm:KMS:pid965:ironlake_check_srwm] watermark 1: display plane 21, fbc lines 3, cursor 6
- [drm:KMS:pid965:ironlake_check_srwm] watermark 2: display plane 76, fbc lines 3, cursor 6
- [drm:KMS:pid965:ironlake_check_srwm] watermark 3: display plane 149, fbc lines 4, cursor 10
- [drm:KMS:pid965:drm_crtc_helper_set_mode] [ENCODER:10:DAC-10] set [MODE:36:1680x1050]
- [drm:KMS:pid965:sandybridge_update_wm] FIFO watermarks For pipe A - plane 13, cursor: 6
- [drm:KMS:pid965:ironlake_check_srwm] watermark 1: display plane 21, fbc lines 3, cursor 6
- [drm:KMS:pid965:ironlake_check_srwm] watermark 2: display plane 76, fbc lines 3, cursor 6
- [drm:KMS:pid965:ironlake_check_srwm] watermark 3: display plane 149, fbc lines 4, cursor 10
- [drm:KMS:pid965:intel_wait_for_vblank] vblank wait timed out
- [drm:KMS:pid965:intel_wait_for_vblank] vblank wait timed out
- [drm:KMS:pid965:ivb_manual_fdi_link_train] FDI_RX_IIR 0x700
- [drm:KMS:pid965:ivb_manual_fdi_link_train] FDI train 1 done.
- [drm:KMS:pid965:ivb_manual_fdi_link_train] FDI_RX_IIR 0x600
- [drm:KMS:pid965:ivb_manual_fdi_link_train] FDI train 2 done.
- [drm:KMS:pid965:ivb_manual_fdi_link_train] FDI train done.
- [drm:KMS:pid965:intel_update_fbc]
- [drm:KMS:pid965:drm_crtc_helper_set_config] Setting connector DPMS state to on
- [drm:KMS:pid965:drm_crtc_helper_set_config] [CONNECTOR:9:VGA-1] set DPMS on
- [drm:KMS:pid965:drm_mode_setcrtc] [CRTC:5]
- [drm:KMS:pid965:drm_crtc_helper_set_config]
- [drm:KMS:pid965:drm_crtc_helper_set_config] [CRTC:5] [NOFB]
- [drm:KMS:pid965:drm_mode_setcrtc] [CRTC:7]
- [drm:KMS:pid965:drm_crtc_helper_set_config]
- [drm:KMS:pid965:drm_crtc_helper_set_config] [CRTC:7] [NOFB]
- [drm:KMS:pid965:intel_crtc_cursor_set]
- [drm:KMS:pid0:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40010, result 1
- [drm:KMS:pid0:intel_crt_detect] CRT detected via hotplug
- [drm:KMS:pid0:output_poll_execute] [CONNECTOR:9:VGA-1] status updated from 1 to 1
- [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
- [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
- [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
- [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
- [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
- [drm:KMS:pid0:intel_hdmi_detect] [CONNECTOR:12:HDMI-A-1] got no edid, ddc port 4
- [drm:KMS:pid0:output_poll_execute] [CONNECTOR:12:HDMI-A-1] status updated from 2 to 2
- [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
- [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
- [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
- [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
- [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
- [drm:KMS:pid0:intel_hdmi_detect] [CONNECTOR:16:HDMI-A-2] got no edid, ddc port 7
- [drm:KMS:pid0:output_poll_execute] [CONNECTOR:16:HDMI-A-2] status updated from 2 to 2
- [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid0:output_poll_execute] [CONNECTOR:17:DP-1] status updated from 2 to 2
- [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
- [drm:KMS:pid0:output_poll_execute] [CONNECTOR:19:DP-2] status updated from 2 to 2
- linux: pid 3750 (npviewer.bin): syscall pipe2 not implemented
- osscore: Overflow 1196032+65536, 1193984
- osscore: Overflow 2807808+65536, 2805760
- osscore: Overflow 194560+65536, 192512
- osscore: Overflow 1468416+65536, 1466368
- osscore: Overflow 1548288+65536, 1546240
- linux: pid 11818 (npviewer.bin): syscall pipe2 not implemented
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement