Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- === START OF INFORMATION SECTION ===
- Model Family: SAMSUNG SpinPoint F3
- Device Model: SAMSUNG HD103SJ
- Serial Number: S246J9BB321306
- LU WWN Device Id: 5 0024e9 204ca1303
- Firmware Version: 1AJ10001
- User Capacity: 1 000 204 886 016 bytes [1,00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 2.6, 3.0 Gb/s
- Local Time is: Tue Jul 14 19:53:31 2015 YAKT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: FAILED!
- Drive failure expected in less than 24 hours. SAVE ALL DATA.
- See vendor-specific Attribute list for failed Attributes.
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 121) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: ( 9420) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 157) minutes.
- SCT capabilities: (0x003f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 001 001 051 Pre-fail Always FAILING_NOW 33410
- 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
- 3 Spin_Up_Time 0x0023 070 066 025 Pre-fail Always - 9136
- 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2825
- 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
- 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
- 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 15597
- 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
- 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2763
- 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 12
- 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
- 194 Temperature_Celsius 0x0002 057 052 000 Old_age Always - 43 (Min/Max 10/48)
- 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
- 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 252 084 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 62
- 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 3648
- 223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
- 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 2905
- SMART Error Log Version: 1
- ATA Error Count: 21 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 21 occurred at disk power-on lifetime: 14525 hours (605 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 00 00 00 00 00
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- ec 00 00 00 00 00 00 00 00:00:12.745 IDENTIFY DEVICE
- 00 10 00 00 00 00 00 00 00:00:12.745 NOP [Reserved subcommand] [OBS-ACS-2]
- 00 10 00 00 00 00 00 00 00:00:12.745 NOP [Reserved subcommand] [OBS-ACS-2]
- 00 00 00 e0 3a 6d 40 00 00:00:12.744 NOP [Abort queued commands]
- 61 00 08 d8 3a 6d 40 00 00:00:12.744 WRITE FPDMA QUEUED
- Error 20 occurred at disk power-on lifetime: 14525 hours (605 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 00 00 00 00 00
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- ec 00 00 00 00 00 00 00 00:00:12.659 IDENTIFY DEVICE
- 00 00 00 00 00 00 00 00 00:00:12.659 NOP [Abort queued commands]
- 00 10 00 00 00 00 00 00 00:00:12.659 NOP [Reserved subcommand] [OBS-ACS-2]
- 00 10 00 00 00 00 00 00 00:00:12.659 NOP [Reserved subcommand] [OBS-ACS-2]
- 00 00 00 00 00 00 00 00 00:00:12.659 NOP [Abort queued commands]
- Error 19 occurred at disk power-on lifetime: 14525 hours (605 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 00 00 00 00 00
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- ec 00 00 00 00 00 00 00 00:00:12.602 IDENTIFY DEVICE
- 00 d1 00 00 00 00 00 00 00:00:12.602 NOP [Reserved subcommand] [OBS-ACS-2]
- 00 d1 00 00 00 00 00 00 00:00:12.602 NOP [Reserved subcommand] [OBS-ACS-2]
- 00 d1 00 00 00 00 00 00 00:00:12.602 NOP [Reserved subcommand] [OBS-ACS-2]
- 00 d1 00 00 00 00 00 00 00:00:12.602 NOP [Reserved subcommand] [OBS-ACS-2]
- Error 18 occurred at disk power-on lifetime: 14525 hours (605 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 00 00 00 00 a0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- ec 00 00 00 00 00 a0 00 00:00:12.397 IDENTIFY DEVICE
- 00 00 00 00 00 00 00 08 00:00:12.397 NOP [Abort queued commands]
- 00 00 00 00 00 00 00 08 00:00:12.397 NOP [Abort queued commands]
- 00 00 00 00 00 00 00 08 00:00:12.396 NOP [Abort queued commands]
- 00 00 21 1f 40 e5 40 08 00:00:12.391 NOP [Abort queued commands]
- Error 17 occurred at disk power-on lifetime: 14525 hours (605 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 00 00 00 00 a0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- ec 00 00 00 00 00 a0 00 00:00:12.314 IDENTIFY DEVICE
- 00 00 00 00 00 00 00 08 00:00:12.314 NOP [Abort queued commands]
- 00 00 00 00 00 00 00 08 00:00:12.314 NOP [Abort queued commands]
- 00 00 08 60 1e 00 40 08 00:00:12.309 NOP [Abort queued commands]
- 00 00 08 58 1e 00 40 08 00:00:12.309 NOP [Abort queued commands]
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed: read failure 90% 3359 143951050
- SMART Selective self-test log data structure revision number 0
- Note: revision number not 1 implies that no selective self-test has ever been run
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Completed_read_failure [90% left] (0-65535)
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement