Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000@0] Initializing cgroup subsys cpu
- [ 0.000000@0] Linux version 3.0.101-MX+ (misi@pernita) (gcc version 4.8.1 20130401 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2013.04-20130417 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Apr 17 12:02:14 CEST 2014
- [ 0.000000@0] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d
- [ 0.000000@0] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000@0] Machine: Amlogic Meson6 g18 MX2 platform
- [ 0.000000@0] Ignoring unrecognised tag 0x00000000
- [ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000@0] On node 0 totalpages: 206080
- [ 0.000000@0] free_area_init_node: node 0, pgdat c08692a0, node_mem_map c0a04000
- [ 0.000000@0] Normal zone: 1022 pages used for memmap
- [ 0.000000@0] Normal zone: 0 pages reserved
- [ 0.000000@0] Normal zone: 73986 pages, LIFO batch:15
- [ 0.000000@0] HighMem zone: 1026 pages used for memmap
- [ 0.000000@0] HighMem zone: 130046 pages, LIFO batch:31
- [ 0.000000@0] PERCPU: Embedded 7 pages/cpu @c120d000 s5376 r8192 d15104 u32768
- [ 0.000000@0] pcpu-alloc: s5376 r8192 d15104 u32768 alloc=8*4096
- [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 204032
- [ 0.000000@0] Kernel command line: root=/dev/cardblksd2 rw rootfstype=ext3 rootwait init=/init console=ttyS0,115200n8 mac=c4:4e:ac:04:da:56 logo=osd1,0x84100000,720p,full androidboot.resolution=720p hdmimode=720p cvbsmode=480cvbs hlt vmalloc=256m mem=1024m a9_clk_max=1512000000 vdachwswitch=component hdmitx= root=/dev/system rootfstype=ext4 a9_clk=800M clk81=187500000 init=/sbin/init hdmitx=true
- [ 0.000000@0] ******** uboot setup mac-addr: c4:4e:ac:4:da:56
- [ 0.000000@0] osd1:1
- [ 0.000000@0] 720p:6
- [ 0.000000@0] full:2
- [ 0.000000@0] HDMI DEBUG: hdmitx_boot_para_setup [1872]
- [ 0.000000@0] HDMI DEBUG: hdmitx_boot_para_setup [1872]
- [ 0.000000@0] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000@0] Memory: 64MB 229MB 512MB = 805MB total
- [ 0.000000@0] Memory: 807092k/807092k available, 17228k reserved, 524288K highmem
- [ 0.000000@0] Virtual kernel memory layout:
- [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000@0] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- [ 0.000000@0] vmalloc : 0xe0000000 - 0xf0000000 ( 256 MB)
- [ 0.000000@0] lowmem : 0xc0000000 - 0xdff00000 ( 511 MB)
- [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000@0] .init : 0xc0008000 - 0xc0033000 ( 172 kB)
- [ 0.000000@0] .text : 0xc0033000 - 0xc08136b8 (8066 kB)
- [ 0.000000@0] .data : 0xc0814000 - 0xc0869d80 ( 344 kB)
- [ 0.000000@0] .bss : 0xc0869da4 - 0xc0a030b0 (1637 kB)
- [ 0.000000@0] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000@0] Preemptible hierarchical RCU implementation.
- [ 0.000000@0] RCU debugfs-based tracing is enabled.
- [ 0.000000@0] NR_IRQS:256
- [ 0.000000@0] gic_init: irq_offset=0
- [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
- [ 0.000000@0] MESON TIMER-A c08232e0
- [ 0.000000@0] Disable timerA
- [ 0.000000@0] Console: colour dummy device 80x30
- [ 0.000000@0] console [ttyS0] enabled
- [ 0.269792@0] Calibrating delay loop... 2393.70 BogoMIPS (lpj=11968512)
- [ 0.330068@0] pid_max: default: 32768 minimum: 301
- [ 0.332262@0] Mount-cache hash table entries: 512
- [ 0.337499@0] Initializing cgroup subsys cpuacct
- [ 0.341427@0] Initializing cgroup subsys freezer
- [ 0.345950@0] Initializing cgroup subsys bfqio
- [ 0.350459@0] CPU: Testing write buffer coherency: ok
- [ 0.355608@0] MESON TIMER-B c08233a0
- [ 0.358975@0] Disable timerA
- [ 0.361830@0] Disable timerB
- [ 0.364700@0] Disable timerA
- [ 0.367695@0] L310 cache controller enabled
- [ 0.371728@0] l2x0: 8 ways, CACHE_ID 0x4100a0c8, AUX_CTRL 0x7e462c01, Cache size: 524288 B
- [ 0.380022@0] prefetch=0x31000006
- [ 0.383356@0] ===actlr=0x41
- [ 0.386139@0] ===actlr=0x4b
- [ 0.388911@0] SCU_CTRL: scu_ctrl=0x69
- [ 0.392557@0] pl310: aux=0x7e462c01, prefetch=0x31000006
- [ 0.495904@1] CPU1: Booted secondary processor
- [ 0.555635@1] MESON TIMER-D c0823520
- [ 0.555659@0] Brought up 2 CPUs
- [ 0.555667@0] SMP: Total of 2 processors activated (4787.40 BogoMIPS).
- [ 0.567628@1] Disable timerD
- [ 0.570647@0] devtmpfs: initialized
- [ 0.577891@0] clkrate [ xtal ] : 24000000
- [ 0.577955@0] clkrate [ pll_sys ] : 1200000000
- [ 0.582381@0] clkrate [ pll_fixed ] : 2000000000
- [ 0.586999@0] clkrate [ pll_vid2 ] : 378000000
- [ 0.591408@0] clkrate [ pll_hpll ] : 378000000
- [ 0.595908@0] clkrate [ pll_ddr ] : 516000000
- [ 0.600176@0] clkrate [ a9_clk ] : 1200000000
- [ 0.604579@0] clkrate [ clk81 ] : 200000000
- [ 0.608785@0] clkrate [ usb0 ] : 0
- [ 0.612163@0] clkrate [ usb1 ] : 0
- [ 0.616476@0] print_constraints: dummy:
- [ 0.619478@0] NET: Registered protocol family 16
- [ 0.624929@0] ***vcck: vcck_pwm_initregister lm device 0
- [ 0.629352@0] register lm device 1
- [ 0.635709@0] usb_wifi_power Off
- [ 0.635980@0] chip version=3df779c7
- [ 0.639418@0] vdac_switch_init_module
- [ 0.642990@0] vdac_switch mode = 1
- [ 0.646542@0] tv_init_module
- [ 0.649220@0] major number 254 for disp
- [ 0.653122@0] vout_register_server
- [ 0.656518@0] register tv module server ok
- [ 0.660838@0] major number 0 for disp
- [ 0.664493@0] register tv module server ok
- [ 0.668853@0] video2_early_init enter
- [ 0.672393@0] video2_early_init exit
- [ 0.675961@0] drivers/amlogic/i2c/aml_i2c.c : aml_i2c_init
- [ 0.681437@0] drivers/amlogic/i2c/aml_i2c.c : aml_i2c_probe
- [ 0.686985@0] master_no = 0, resource = c0826e78, maseter_regs=f1108500
- [ 0.693697@0] aml-i2c aml-i2c.0: add adapter aml_i2c_adap0(df811828)
- [ 0.699918@0] aml-i2c aml-i2c.0: aml i2c bus driver.
- [ 0.704949@0] drivers/amlogic/i2c/aml_i2c.c : aml_i2c_probe
- [ 0.710421@0] master_no = 1, resource = c0826e5c, maseter_regs=f11087c0
- [ 0.717117@0] aml-i2c aml-i2c.1: add adapter aml_i2c_adap1(df812028)
- [ 0.723344@0] aml-i2c aml-i2c.1: aml i2c bus driver.
- [ 0.728388@0] drivers/amlogic/i2c/aml_i2c.c : aml_i2c_probe
- [ 0.733847@0] master_no = 2, resource = c0826e40, maseter_regs=f3100500
- [ 0.740561@0] aml-i2c aml-i2c.2: add adapter aml_i2c_adap2(df812828)
- [ 0.746789@0] aml-i2c aml-i2c.2: aml i2c bus driver.
- [ 0.751894@0] HDMI DEBUG: amhdmitx_init [1773]
- [ 0.756177@0] HDMI DEBUG: amhdmitx_probe [1583]
- [ 0.760945@1] Set HDMI:Chip C
- [ 0.763620@1] HDMI DEBUG: HDMITX_M1B_Init [3328]
- [ 0.768250@1] HDMI DEBUG: HDMITX_M1B_Init [3331]
- [ 0.768254@0] HDMI: get hdmi platform data
- [ 0.768260@0] HDMI 5V Power On
- [ 0.770433@0] ------------[ cut here ]------------
- [ 0.770465@0] WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0x9c/0xbc()
- [ 0.770470@0] sysfs: cannot create duplicate filename '/module/hdmitx/version'
- [ 0.770475@0] Modules linked in:
- [ 0.770519@0] [<c003fe50>] (unwind_backtrace+0x0/0xf4) from [<c00606c0>] (warn_slowpath_common+0x54/0x64)
- [ 0.770534@0] [<c00606c0>] (warn_slowpath_common+0x54/0x64) from [<c0060700>] (warn_slowpath_fmt+0x30/0x40)
- [ 0.770546@0] [<c0060700>] (warn_slowpath_fmt+0x30/0x40) from [<c0122908>] (sysfs_add_one+0x9c/0xbc)
- [ 0.770562@0] [<c0122908>] (sysfs_add_one+0x9c/0xbc) from [<c0121b2c>] (sysfs_add_file_mode+0x44/0xa4)
- [ 0.770584@0] [<c0121b2c>] (sysfs_add_file_mode+0x44/0xa4) from [<c000fca8>] (param_sysfs_init+0x90/0x1c4)
- [ 0.770600@0] [<c000fca8>] (param_sysfs_init+0x90/0x1c4) from [<c00336e0>] (do_one_initcall+0x11c/0x174)
- [ 0.770613@0] [<c00336e0>] (do_one_initcall+0x11c/0x174) from [<c00089e0>] (kernel_init+0xc0/0x148)
- [ 0.770633@0] [<c00089e0>] (kernel_init+0xc0/0x148) from [<c003a084>] (kernel_thread_exit+0x0/0x8)
- [ 0.770656@0] ---[ end trace 1b75b31a2719ed1c ]---
- [ 0.820600@0] bio: create slab <bio-0> at 0
- [ 0.821685@0] SCSI subsystem initialized
- [ 0.821981@0] usbcore: registered new interface driver usbfs
- [ 0.822236@0] usbcore: registered new interface driver hub
- [ 0.822416@0] usbcore: registered new device driver usb
- [ 0.823080@0] TV mode 720p selected.
- [ 0.823087@0] [0x1b7e] = 0xff
- [ 0.823091@0] [0x105f] = 0x0
- [ 0.823094@0] [0x109d] = 0x814d3928
- [ 0.823098@0] [0x109e] = 0x6b425012
- [ 0.823102@0] [0x109f] = 0x110
- [ 0.823105@0] [0x109c] = 0x1043e
- [ 0.823108@0] [0x1066] = 0x10843
- [ 0.823112@0] [0x1059] = 0x100
- [ 0.823115@0] [0x105f] = 0x80000
- [ 0.823118@0] [0x105f] = 0x88001
- [ 0.823122@0] [0x105f] = 0x80003
- [ 0.823125@0] [0x104a] = 0x101
- [ 0.823128@0] [0x107f] = 0x8c0000c3
- [ 0.823132@0] [0x1bb8] = 0x52
- [ 0.823135@0] [0x1b62] = 0x2029
- [ 0.823138@0] [0x1b8d] = 0x4040
- [ 0.823141@0] [0x1b8e] = 0x19
- [ 0.823145@0] [0x1b94] = 0x288
- [ 0.823148@0] [0x1b95] = 0xc87
- [ 0.823151@0] [0x1b97] = 0xce3
- [ 0.823154@0] [0x1b98] = 0x50
- [ 0.823157@0] [0x1b99] = 0xf0
- [ 0.823160@0] [0x1b9a] = 0x50
- [ 0.823163@0] [0x1b9b] = 0x2b0
- [ 0.823167@0] [0x1b9c] = 0xcb0
- [ 0.823170@0] [0x1b9d] = 0x4
- [ 0.823173@0] [0x1b9e] = 0x8
- [ 0.823176@0] [0x1ba1] = 0x4
- [ 0.823179@0] [0x1ba2] = 0x8
- [ 0.823182@0] [0x1ba4] = 0x288
- [ 0.823186@0] [0x1ba3] = 0xc87
- [ 0.823189@0] [0x1ba6] = 0x1d
- [ 0.823192@0] [0x1baf] = 0x2ec
- [ 0.823195@0] [0x1ba7] = 0x100
- [ 0.823198@0] [0x1ba8] = 0xa8
- [ 0.823201@0] [0x1ba9] = 0xa8
- [ 0.823204@0] [0x1baa] = 0x100
- [ 0.823207@0] [0x1bab] = 0x0
- [ 0.823211@0] [0x1bac] = 0x5
- [ 0.823214@0] [0x1bae] = 0x2ed
- [ 0.823217@0] [0x1b68] = 0x100
- [ 0.823220@0] [0x1b60] = 0x0
- [ 0.823223@0] [0x1b6e] = 0x200
- [ 0.823226@0] [0x1b58] = 0x0
- [ 0.823229@0] [0x1b7e] = 0x0
- [ 0.823232@0] [0x1b64] = 0x9061
- [ 0.823236@0] [0x1b65] = 0xa061
- [ 0.823239@0] [0x1b66] = 0xb061
- [ 0.823242@0] [0x1b78] = 0x1
- [ 0.823245@0] [0x1b79] = 0x1
- [ 0.823248@0] [0x1b7a] = 0x1
- [ 0.823251@0] [0x1b7b] = 0x1
- [ 0.823254@0] [0x1b7c] = 0x1
- [ 0.823257@0] [0x1b7d] = 0x1
- [ 0.823260@0] [0x271a] = 0xa
- [ 0.823264@0] [0x1bfc] = 0x1000
- [ 0.823267@0] [0x1c0d] = 0x3102
- [ 0.823270@0] [0x1c0e] = 0x54
- [ 0.823273@0] [0x1b80] = 0x1
- [ 0.823276@0] [0x1b57] = 0x0
- [ 0.823280@0] tvoutc_setmode[267]
- [ 0.823284@0] mode is: 6
- [ 0.823290@0] VPU_VIU_VENC_MUX_CTRL: 0xa
- [ 0.823293@0] viu chan = 1
- [ 0.823296@0] VPU_VIU_VENC_MUX_CTRL: 0xa
- [ 0.857043@0] request_fiq:152: fiq=35
- [ 0.857059@0] request_fiq:186: end
- [ 0.885369@0] print_constraints: vcck: 1010 <--> 1210 mV at 1380 mV
- [ 0.885934@0] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 0.887683@0] Switching to clocksource Timer-E
- [ 1.127132@0] cfg80211: Calling CRDA to update world regulatory domain
- [ 1.127413@1] HDMI DEBUG: hdmi_hw_init [1221]
- [ 1.127431@1] HDMI: get brd phy data
- [ 1.127435@1] hdmi phy setting
- [ 1.127503@1] HDMI: get brd phy data
- [ 1.127506@1] hdmi phy setting
- [ 1.128316@1] HDMI: reset intr mask
- [ 1.135672@1] Switched to NOHz mode on CPU #1
- [ 1.147138@1] HDMI DEBUG: hdmi_task_handle [1218]
- [ 1.163611@0] Switched to NOHz mode on CPU #0
- [ 1.178989@0] NET: Registered protocol family 2
- [ 1.179118@0] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 1.185375@0] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 1.193138@0] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
- [ 1.201696@0] TCP: Hash tables configured (established 65536 bind 65536)
- [ 1.205927@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 1.211395@0] HDMI irq 1
- [ 1.213905@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 1.219603@0] TCP reno registered
- [ 1.222855@0] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 1.229106@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 1.235522@0] NET: Registered protocol family 1
- [ 1.241001@0] highmem bounce pool size: 64 pages
- [ 1.244617@0] ashmem: initialized
- [ 1.257773@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.259337@0] NTFS driver 2.1.30 [Flags: R/O].
- [ 1.262905@0] fuse init (API version 7.16)
- [ 1.267412@0] yaffs: yaffs built Apr 17 2014 11:59:26 Installing.
- [ 1.267449@0] msgmni has been set to 552
- [ 1.271379@0] io scheduler noop registered
- [ 1.274629@0] io scheduler deadline registered
- [ 1.279355@0] io scheduler bfq registered (default)
- [ 1.435414@0] loop: module loaded
- [ 1.438066@0] PPP generic driver version 2.4.2
- [ 1.438574@0] PPP Deflate Compression module registered
- [ 1.442726@0] PPP BSD Compression module registered
- [ 1.447971@0] PPP MPPE Compression module registered
- [ 1.452535@0] NET: Registered protocol family 24
- [ 1.457152@0] tun: Universal TUN/TAP device driver, 1.6
- [ 1.462342@0] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
- [ 1.469256@0] usbcore: registered new interface driver asix
- [ 1.474325@0] usbcore: registered new interface driver cdc_ether
- [ 1.480341@0] usbcore: registered new interface driver net1080
- [ 1.486127@0] usbcore: registered new interface driver cdc_subset
- [ 1.492221@0] usbcore: registered new interface driver zaurus
- [ 1.497867@0] cdc_ncm: 04-Aug-2011
- [ 1.501345@0] usbcore: registered new interface driver cdc_ncm
- [ 1.507171@0] usbcore: registered new interface driver qf9700
- [ 1.512875@0] usbcore: registered new interface driver sr9600
- [ 1.518869@0] usbcore: registered new interface driver cdc_acm
- [ 1.524317@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 1.532487@0] Initializing USB Mass Storage driver...
- [ 1.537622@0] usbcore: registered new interface driver usb-storage
- [ 1.543673@0] USB Mass Storage support registered.
- [ 1.548679@0] usbcore: registered new interface driver usbserial
- [ 1.554437@0] usbserial: USB Serial Driver core
- [ 1.559051@0] USB Serial support registered for GSM modem (1-port)
- [ 1.565208@0] usbcore: registered new interface driver option
- [ 1.570850@0] option: v0.7.2:USB Driver for GSM modems
- [ 1.576626@0] mousedev: PS/2 mouse device common for all mice
- [ 1.582944@0] usbcore: registered new interface driver iforce
- [ 1.588584@0] usbcore: registered new interface driver xpad
- [ 1.593861@0] i2c /dev entries driver
- [ 1.597727@0] lirc_dev: IR Remote Control driver registered, major 250
- [ 1.603219@0] IR NEC protocol handler initialized
- [ 1.607920@0] IR RC5(x) protocol handler initialized
- [ 1.612853@0] IR RC6 protocol handler initialized
- [ 1.617547@0] IR JVC protocol handler initialized
- [ 1.622226@0] IR Sony protocol handler initialized
- [ 1.627001@0] IR RC5 (streamzap) protocol handler initialized
- [ 1.632738@0] IR LIRC bridge handler initialized
- [ 1.637336@0] Linux video capture interface: v2.00
- [ 1.642328@0] usbcore: registered new interface driver uvcvideo
- [ 1.648022@0] USB Video Class driver (v1.1.0)
- [ 1.653171@0] device-mapper: uevent: version 1.0.3
- [ 1.657771@0] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
- [ 1.666000@0] cpuidle: using governor ladder
- [ 1.669983@0] cpuidle: using governor menu
- [ 1.674742@0] usbcore: registered new interface driver usbhid
- [ 1.679788@0] usbhid: USB HID core driver
- [ 1.684419@0] logger: created 256K log 'log_main'
- [ 1.688715@0] logger: created 256K log 'log_events'
- [ 1.693537@0] logger: created 256K log 'log_radio'
- [ 1.698334@0] logger: created 256K log 'log_system'
- [ 1.703059@0] vout_init_module
- [ 1.706026@0] start init vout module
- [ 1.709838@0] create vout attribute ok
- [ 1.713825@0] ge2d_init
- [ 1.716152@0] ge2d_dev major:249
- [ 1.719898@0] ge2d start monitor
- [ 1.722779@0] osd_init
- [ 1.722783@1] ge2d workqueue monitor start
- [ 1.729299@0] [osd0] 0x84100000-0x850fffff
- [ 1.733566@0] Frame buffer memory assigned at phy:0x84100000, vir:0xe1000000, size=16384K
- [ 1.741505@0] ---------------clear framebuffer0 memory
- [ 1.758988@0] [osd1] 0x85100000-0x860fffff
- [ 1.759242@0] Frame buffer memory assigned at phy:0x85100000, vir:0xe3000000, size=16384K
- [ 1.765595@0] init fbdev bpp is :24
- [ 1.767466@1] HDMI: EDID Ready
- [ 1.789952@0] osd probe ok
- [ 1.790278@0] vout2_init_module enter
- [ 1.791001@0] start init vout2 module
- [ 1.795109@0] create vout2 attribute ok
- [ 1.806007@0] DI: di_init
- [ 1.806091@0] DI: di_probe
- [ 1.807381@0] set pinmux c082699c
- [ 1.837267@0] UART_ttyS0:(irq = 122)
- [ 1.837598@0] dwc_otg: version 2.94a 05-DEC-2012
- [ 1.839848@0] dwc_otg lm0: dwc_otg_driver_probe(df8be600)
- [ 1.839859@0] dwc_otg lm0: start=0xf3240000
- [ 2.340584@0] USB (0) use clock source: XTAL input
- [ 2.341624@0] dwc_otg lm0: base=0xf3240000
- [ 2.341630@0] dwc_otg lm0: dwc_otg_device=0xdf968680
- [ 2.541652@0] Core Release: 2.94a
- [ 2.541678@0] Setting default values for core params
- [ 2.544303@0] dwc_otg lm0: DMA config: BURST_DEFAULT
- [ 2.944363@0] Using Buffer DMA mode
- [ 2.944391@0] OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 2.946719@0] Working on port type = OTG
- [ 2.950647@0] Current port type: SLAVE
- [ 2.954507@0] dwc_otg lm0: DWC OTG Controller
- [ 2.958824@0] dwc_otg lm0: new USB bus registered, assigned bus number 1
- [ 2.965408@0] dwc_otg lm0: irq 62, io mem 0x00000000
- [ 2.970416@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.977304@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.984650@0] usb usb1: Product: DWC OTG Controller
- [ 2.989534@0] usb usb1: Manufacturer: Linux 3.0.101-MX+ dwc_otg_hcd
- [ 2.995760@0] usb usb1: SerialNumber: lm0
- [ 3.000745@0] hub 1-0:1.0: USB hub found
- [ 3.003671@0] hub 1-0:1.0: 1 port detected
- [ 3.008127@0] Dedicated Tx FIFOs mode
- [ 3.011636@0] using timer detect id change, df243000
- [ 3.016362@0] dwc_otg lm1: dwc_otg_driver_probe(df8be800)
- [ 3.016369@0] dwc_otg lm1: start=0xf32c0000
- [ 3.016376@0] dwc_otg lm1: base=0xf32c0000
- [ 3.016381@0] dwc_otg lm1: dwc_otg_device=0xdf9f4fc0
- [ 3.117159@0] HOST mode
- [ 3.241286@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 3.241330@0] HDMI irq 2
- [ 3.243734@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 3.337147@0] Core Release: 2.94a
- [ 3.337171@0] Setting default values for core params
- [ 3.339794@0] dwc_otg lm1: DMA config: BURST_DEFAULT
- [ 3.514514@0] Using Buffer DMA mode
- [ 3.514541@0] OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 3.560188@0] Init: Port Power? op_state=1
- [ 3.560216@0] Init: Power Port (0)
- [ 3.562026@0] set usb port power on (board gpio 25)!
- [ 3.662634@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 3.662681@0] HDMI irq 1
- [ 3.664991@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 3.847588@0] Using Buffer DMA mode
- [ 3.847614@0] OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 3.849942@0] Working on port type = HOST
- [ 3.854047@0] dwc_otg lm1: DWC OTG Controller
- [ 3.858334@0] dwc_otg lm1: new USB bus registered, assigned bus number 2
- [ 3.864977@0] dwc_otg lm1: irq 63, io mem 0x00000000
- [ 3.872999@0] Init: Port Power? op_state=1
- [ 3.873985@0] Init: Power Port (0)
- [ 3.877447@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.884316@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.891718@0] usb usb2: Product: DWC OTG Controller
- [ 3.896554@0] usb usb2: Manufacturer: Linux 3.0.101-MX+ dwc_otg_hcd
- [ 3.902825@0] usb usb2: SerialNumber: lm1
- [ 3.907642@0] hub 2-0:1.0: USB hub found
- [ 3.910710@0] hub 2-0:1.0: 1 port detected
- [ 3.915189@0] Amlogic nand flash Kernel driver, Version K1.06.014 (c) 2010 Amlogic Inc.
- [ 3.922850@0] ####Version of Uboot must be newer than U1.06.011!!!!!
- [ 3.929270@0] 1
- [ 3.930930@0] chip->controller=c09d66f4
- [ 3.934744@0] checking ChiprevD :0
- [ 3.938180@0] aml_nand_probe checked chiprev:0
- [ 3.942570@0] init bus_cycle=17, bus_timing=10, start_cycle=10, end_cycle=10,system=5.0ns
- [ 3.951175@0] No NAND device found.
- [ 3.954430@0] NAND device id: 2c 64 44 4b a9 0
- [ 3.958757@0] Indeed it is in host mode hprt0 = 00041901
- [ 3.977136@1] NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron B revision NAND 8GiB MT29F64G08CBABA)
- [ 3.981564@1] #####aml_nand_init, with RB pins and chip->chip_delay:20
- [ 3.997131@1] bus_cycle=4, bus_timing=5, start_cycle=5, end_cycle=6,system=5.0ns
- [ 3.998885@1] oob size is not enough for selected bch mode: NAND_BCH60_1K_MODE force bch to mode: NAND_BCH40_1K_MODE
- [ 4.017124@1] aml_chip->oob_fill_cnt =168,aml_chip->oob_size =744,bch_bytes =70
- [ 4.018786@1] multi plane error for selected plane mode: NAND_TWO_PLANE_MODE force plane to : NAND_SINGLE_PLANE_MODE
- [ 4.037147@0] oob layout use nand base oob layout oobsize = 32,oobmul =1,mtd->oobsize =744,aml_chip->oob_size =744
- [ 4.045511@0] ########aml_nand_read_page_hwecc 2783 read ecc failed here at at page:0, blk:0 chip[0]
- [ 4.051135@0] NAND detect Bad block at 0
- [ 4.058361@0] ########aml_nand_read_page_hwecc 2783 read ecc failed here at at page:256, blk:1 chip[0]
- [ 4.064457@0] NAND detect Bad block at 200000
- [ 4.072184@0] ########aml_nand_read_page_hwecc 2783 read ecc failed here at at page:512, blk:2 chip[0]
- [ 4.078296@0] NAND detect Bad block at 400000
- [ 4.085962@0] ########aml_nand_read_page_hwecc 2783 read ecc failed here at at page:768, blk:3 chip[0]
- [ 4.092084@0] NAND detect Bad block at 600000
- [ 4.137143@0] usb 1-1: new low speed USB device number 2 using dwc_otg
- [ 4.138766@0] Indeed it is in host mode hprt0 = 00041901
- [ 4.152913@0] aml nand env valid addr: b00000
- [ 4.152944@0] CONFIG_ENV_SIZE=0x8000; ENV_SIZE=0x7ffc; bbt=0x1330; default_environment_size=0x0
- [ 4.154379@0] nand env: nand_env_probe.
- [ 4.180527@0] ########aml_nand_read_page_hwecc 2783 read ecc failed here at at page:0, blk:0 chip[0]
- [ 4.184061@0] NAND detect Bad block at 0
- [ 4.200360@0] ########aml_nand_read_page_hwecc 2783 read ecc failed here at at page:256, blk:1 chip[0]
- [ 4.204058@0] NAND detect Bad block at 200000
- [ 4.220365@0] ########aml_nand_read_page_hwecc 2783 read ecc failed here at at page:512, blk:2 chip[0]
- [ 4.224065@0] NAND detect Bad block at 400000
- [ 4.250353@0] ########aml_nand_read_page_hwecc 2783 read ecc failed here at at page:768, blk:3 chip[0]
- [ 4.254054@0] NAND detect Bad block at 600000
- [ 4.317021@0] ########aml_nand_read_page_hwecc 2783 read ecc failed here at at page:23040, blk:90 chip[0]
- [ 4.321024@0] NAND detect Bad block at b400000
- [ 4.328674@0] ########aml_nand_read_page_hwecc 2783 read ecc failed here at at page:23296, blk:91 chip[0]
- [ 4.335134@0] NAND detect Bad block at b600000
- [ 4.402508@0] usb 1-1: New USB device found, idVendor=0603, idProduct=00f2
- [ 4.403736@0] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 4.413813@0] usb 1-1: Product: USB Keyboard
- [ 4.415279@0] usb 1-1: Manufacturer: NOVATEK
- [ 4.467240@0] input: NOVATEK USB Keyboard as /devices/lm0/usb1/1-1/1-1:1.0/input/input0
- [ 4.472457@0] generic-usb 0003:0603:00F2.0001: input: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-lm0-1/input0
- [ 4.527219@0] input: NOVATEK USB Keyboard as /devices/lm0/usb1/1-1/1-1:1.1/input/input1
- [ 4.530088@0] generic-usb 0003:0603:00F2.0002: input: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-lm0-1/input1
- [ 4.557315@0] Indeed it is in host mode hprt0 = 00021501
- [ 4.787142@0] usb 2-1: new high speed USB device number 2 using dwc_otg
- [ 4.788224@0] Indeed it is in host mode hprt0 = 00001101
- [ 5.047829@0] usb 2-1: New USB device found, idVendor=067b, idProduct=2528
- [ 5.049066@0] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 5.056363@0] usb 2-1: Product: USB Flash Drive
- [ 5.061476@0] Creating 9 MTD partitions on "B revision NAND 8GiB MT29F64G08CBABA":
- [ 5.068453@0] usb 2-1: Manufacturer: USB 2.0
- [ 5.072685@0] usb 2-1: SerialNumber: 00071212064E512770D7
- [ 5.078092@0] 0x000001000000-0x000001400000 : "ubootenv"
- [ 5.086653@0] 0x000001400000-0x000001c00000 : "logo"
- [ 5.092471@0] 0x000001c00000-0x000002400000 : "aml_logo"
- [ 5.097026@0] scsi0 : usb-storage 2-1:1.0
- [ 5.098962@0] 0x000002400000-0x000002c00000 : "recovery"
- [ 5.107075@0] 0x000002c00000-0x000003400000 : "boot"
- [ 5.111863@0] 0x000003400000-0x000043800000 : "system"
- [ 5.157398@0] ########aml_nand_read_page_hwecc 2783 read ecc failed here at at page:23040, blk:90 chip[0]
- [ 5.161372@0] NAND detect Bad block at b400000
- [ 5.169063@0] ########aml_nand_read_page_hwecc 2783 read ecc failed here at at page:23296, blk:91 chip[0]
- [ 5.175516@0] NAND detect Bad block at b600000
- [ 5.468141@0] 0x000043800000-0x000063800000 : "cache"
- [ 5.642496@0] 0x000063800000-0x000073800000 : "backup"
- [ 5.712209@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 5.712269@0] HDMI irq 2
- [ 5.714662@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 5.740762@0] 0x000073800000-0x000200000000 : "userdata"
- [ 6.133564@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 6.133627@0] HDMI irq 1
- [ 6.135937@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 6.323816@1] Unable to handle kernel paging request at virtual address e0000004
- [ 6.325575@1] pgd = c0004000
- [ 6.328453@1] [e0000004] *pgd=9f82c811, *pte=00000000, *ppte=00000000
- [ 6.334864@1] Internal error: Oops: 7 [#1] PREEMPT SMP
- [ 6.339983@1] Modules linked in:
- [ 6.343197@1] CPU: 1 Tainted: G W (3.0.101-MX+ #1)
- [ 6.349116@1] PC is at Edid_CompareTimingDescriptors+0x18/0x134
- [ 6.355002@1] LR is at Edid_ParseCEADetailedTimingDescriptors+0x28/0x4c
- [ 6.361598@1] pc : [<c0441c68>] lr : [<c0441dac>] psr: 80000013
- [ 6.361601@1] sp : df93df28 ip : 00000002 fp : 00000053
- [ 6.373400@1] r10: 00000047 r9 : 00000048 r8 : 00000004
- [ 6.378783@1] r7 : c09eeca8 r6 : c09ef910 r5 : 0241b8c4 r4 : e0000004
- [ 6.385466@1] r3 : 00000000 r2 : 0000003b r1 : c09eecde r0 : c09ef910
- [ 6.392151@1] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
- [ 6.399614@1] Control: 10c53c7d Table: 8000404a DAC: 00000017
- [ 6.405517@1]
- [ 6.405518@1] PC: 0xc0441be8:
- [ 6.410116@1] 1be8 e3520e2d 13a04000 02034001 e3540000 1affffe9 e3520c05 13a04000 02034001
- [ 6.418448@1] 1c08 e3540000 0a000007 e5d03061 e2811002 e151000c e3833008 e5c03061 1affffe4
- [ 6.426781@1] 1c28 e49d4004 e12fff1e e3520d1e 13a03000 02033001 e3530000 15d03061 13833080
- [ 6.435114@1] 1c48 15c03061 eaffffd7 e92d0030 e30e454c e34c4067 e3a05000 e3a03000 e7d1c003
- [ 6.443447@1] 1c68 e7d42003 e2833001 e15c0002 1a000012 e353000c 1afffff8 e2453002 e353000c
- [ 6.451779@1] 1c88 979ff103 ea000034 c0441d54 c0441d54 c0441d44 c0441d44 c0441d34 c0441d34
- [ 6.460112@1] 1ca8 c0441d24 c0441d14 c0441d04 c0441cf4 c0441ce4 c0441cd0 c0441d74 e2855001
- [ 6.468445@1] 1cc8 e284400e eaffffe3 e5d03062 e3833001 e5c03062 e8bd0030 e12fff1e e5d03061
- [ 6.476778@1]
- [ 6.476780@1] LR: 0xc0441d2c:
- [ 6.481378@1] 1d2c e5c03061 eaffffe9 e5d03061 e3833004 e5c03061 eaffffe5 e5d03061 e3833002
- [ 6.489711@1] 1d4c e5c03061 eaffffe1 e5d03061 e3833001 e5c03061 eaffffdd e5d03060 e3833080
- [ 6.498044@1] 1d6c e5c03060 eaffffd9 e5d03062 e3833002 e5c03062 eaffffd5 e92d41f0 e2518000
- [ 6.506376@1] 1d8c e1a06000 e1a07003 08bd81f0 e3a05000 e2824012 e0871002 e1a00006 ebffffa8
- [ 6.514709@1] 1dac e6ef2074 e2855001 e6ef5075 e2824012 e354007d c8bd81f0 e1550008 1afffff4
- [ 6.523042@1] 1dcc e8bd81f0 e3003ca0 e34c309f e5d30002 e12fff1e e92d0070 e3003ca0 e5d16004
- [ 6.531375@1] 1dec e34c309f e3a04001 e5d0c000 e5d02001 e1a06226 e5d05002 e7c3c016 e5c0c000
- [ 6.539708@1] 1e0c e5d16004 e7c7c216 e5c0c000 e5d1c005 e1a0c22c e7c3201c e5c02001 e5d11005
- [ 6.548041@1]
- [ 6.548043@1] SP: 0xdf93dea8:
- [ 6.552641@1] dea8 00000102 df93c000 df93c000 c0031a3c c081ed40 c0031a3c 00000053 c0033060
- [ 6.560973@1] dec8 ffffffff df93df14 c09ef910 c09eeca8 00000004 c0038aac c09ef910 c09eecde
- [ 6.569306@1] dee8 0000003b 00000000 e0000004 0241b8c4 c09ef910 c09eeca8 00000004 00000048
- [ 6.577639@1] df08 00000047 00000053 00000002 df93df28 c0441dac c0441c68 80000013 ffffffff
- [ 6.585972@1] df28 00000048 00000000 c09eeca8 c09eec30 df93df78 00000000 0000005a c0443884
- [ 6.594305@1] df48 ff102100 ffff0002 c09ef910 00000080 c09eec30 000001a0 c09ef974 df0d13c0
- [ 6.602638@1] df68 00000000 00000036 00000048 0000005a 0000006c 54535251 58575655 c0795a59
- [ 6.610970@1] df88 c09efb17 c09eec30 00000001 c09f0c28 c085b168 00000000 00000000 00000000
- [ 6.619304@1]
- [ 6.619306@1] R0: 0xc09ef890:
- [ 6.623903@1] f890 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 6.632236@1] f8b0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 6.640569@1] f8d0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 6.648901@1] f8f0 00000000 00000000 00000000 00000000 00000000 01000000 00010001 00000000
- [ 6.657234@1] f910 00000000 00000001 00000001 00000002 00000001 00000001 00000000 00000000
- [ 6.665567@1] f930 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 6.673900@1] f950 00000000 00000000 00000000 00000000 00000000 00000000 00000000 61000000
- [ 6.682233@1] f970 00000803 44494445 746e4920 75727265 63207470 62207275 6b636f6c 0a3a3120
- [ 6.690566@1]
- [ 6.690568@1] R1: 0xc09eec5e:
- [ 6.695166@1] ec5c c09eec5c c09eec5c 0fd00000 00000020 00000000 df91f600 df91f900 c04443c8
- [ 6.703499@1] ec7c c04444d0 c04450c4 c0446720 c0444ac8 c0444a90 c04451fc c0444ec0 c0445fb0
- [ 6.711831@1] ec9c c08259f4 00000000 00000000 ffffff00 00ffffff 59a66d1e 01010101 03011605
- [ 6.720165@1] ecbc 781b3080 a37562ea 27a04f55 21545012 40710008 0081c081 00958081 c0a94090
- [ 6.728497@1] ecdc 3a0200b3 38711880 2c58402d 0cdd0045 1e000011 fd000000 1e3d3800 0a000f53
- [ 6.736830@1] ecfc 20202020 00002020 3200fc00 35414532 20200a33 20202020 ff000000 20200a00
- [ 6.745163@1] ed1c 20202020 20202020 4a012020 f11d0302 0304904a 05121401 2313101f 83070709
- [ 6.753496@1] ed3c 65000001 10000c03 803a0200 2d387118 452c5840 110cdd00 011e0000 7118801d
- [ 6.761829@1] ed5c 5820161c dd00252c 0000110c 001d019e 1ed05172 55286e20 110cdd00 8c1e0000
- [ 6.770162@1]
- [ 6.770164@1] R4: 0xdfffff84:
- [ 6.774762@1] ff84 65e9f35f ceee6bcb fdffd74e ff687e3e e2eadfe3 7cfe6faa a53fffab a7d23aa8
- [ 6.783094@1] ffa4 fbfef1af ea71ef8f b3ddbda7 7ff24859 9f87e372 d2fccad9 dbbafafd efe5da1f
- [ 6.791427@1] ffc4 bdfcbeaf defbffdf f3cb7f7b 9d0cdd8b 9bbfdd9f cbceea89 f5cbffbb 9dfe4fb5
- [ 6.799760@1] ffe4 fe3edf9f badcffff ef869ffe 3c3bd9db f13bebbb ea77ecfa ff17bbce ********
- [ 6.808093@1] 0004 ******** ******** ******** ******** ******** ******** ******** ********
- [ 6.816426@1] 0024 ******** ******** ******** ******** ******** ******** ******** ********
- [ 6.824759@1] 0044 ******** ******** ******** ******** ******** ******** ******** ********
- [ 6.833091@1] 0064 ******** ******** ******** ******** ******** ******** ******** ********
- [ 6.841425@1]
- [ 6.841426@1] R6: 0xc09ef890:
- [ 6.846024@1] f890 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 6.854357@1] f8b0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 6.862690@1] f8d0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 6.871023@1] f8f0 00000000 00000000 00000000 00000000 00000000 01000000 00010001 00000000
- [ 6.879356@1] f910 00000000 00000001 00000001 00000002 00000001 00000001 00000000 00000000
- [ 6.887688@1] f930 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 6.896021@1] f950 00000000 00000000 00000000 00000000 00000000 00000000 00000000 61000000
- [ 6.904354@1] f970 00000803 44494445 746e4920 75727265 63207470 62207275 6b636f6c 0a3a3120
- [ 6.912688@1]
- [ 6.912689@1] R7: 0xc09eec28:
- [ 6.917287@1] ec28 00000000 00000000 00000000 c09eec34 c09eec34 00000000 00000000 c082bb2c
- [ 6.925620@1] ec48 00000000 00000001 00000001 00000000 c067e394 c09eec5c c09eec5c 0fd00000
- [ 6.933953@1] ec68 00000020 00000000 df91f600 df91f900 c04443c8 c04444d0 c04450c4 c0446720
- [ 6.942285@1] ec88 c0444ac8 c0444a90 c04451fc c0444ec0 c0445fb0 c08259f4 00000000 00000000
- [ 6.950618@1] eca8 ffffff00 00ffffff 59a66d1e 01010101 03011605 781b3080 a37562ea 27a04f55
- [ 6.958951@1] ecc8 21545012 40710008 0081c081 00958081 c0a94090 3a0200b3 38711880 2c58402d
- [ 6.967284@1] ece8 0cdd0045 1e000011 fd000000 1e3d3800 0a000f53 20202020 00002020 3200fc00
- [ 6.975617@1] ed08 35414532 20200a33 20202020 ff000000 20200a00 20202020 20202020 4a012020
- [ 6.983952@1] Process kthread_hdmi (pid: 83, stack limit = 0xdf93c2f0)
- [ 6.990462@1] Stack: (0xdf93df28 to 0xdf93e000)
- [ 6.994977@1] df20: 00000048 00000000 c09eeca8 c09eec30 df93df78 00000000
- [ 7.003310@1] df40: 0000005a c0443884 ff102100 ffff0002 c09ef910 00000080 c09eec30 000001a0
- [ 7.011642@1] df60: c09ef974 df0d13c0 00000000 00000036 00000048 0000005a 0000006c 54535251
- [ 7.019976@1] df80: 58575655 c0795a59 c09efb17 c09eec30 00000001 c09f0c28 c085b168 00000000
- [ 7.028308@1] dfa0: 00000000 00000000 00000000 c043d8d0 df833eac c09eec30 c043d588 00000013
- [ 7.036641@1] dfc0: 00000000 c007b190 c003a084 00000000 c09eec30 00000000 00000000 00000000
- [ 7.044974@1] dfe0: df93dfe0 df93dfe0 df833eac c007b10c c003a084 c003a084 00000000 00000000
- [ 7.053322@1] [<c0441c68>] (Edid_CompareTimingDescriptors+0x18/0x134) from [<c09eeca8>] (0xc09eeca8)
- [ 7.062424@1] Code: e34c4067 e3a05000 e3a03000 e7d1c003 (e7d42003)
- [ 7.068711@1] ---[ end trace 1b75b31a2719ed1d ]---
- [ 7.857755@0] init_aml_nftl start
- [ 7.857786@0] mtd->name: system
- [ 7.858573@0] nftl version 130502a
- [ 7.905913@0] ########aml_nand_read_page_hwecc 2783 read ecc failed here at at page:23040, blk:90 chip[0]
- [ 7.909904@0] NAND detect Bad block at b400000
- [ 7.917575@0] ########aml_nand_read_page_hwecc 2783 read ecc failed here at at page:23296, blk:91 chip[0]
- [ 7.924027@0] NAND detect Bad block at b600000
- [ 8.171663@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 8.171698@0] HDMI irq 2
- [ 8.174112@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 8.221703@0] nftl start:514,64
- [ 8.222755@0] first
- [ 8.284009@0] ########aml_nand_read_page_hwecc 2783 read ecc failed here at at page:23040, blk:90 chip[0]
- [ 8.288011@0] NAND detect Bad block at b400000
- [ 8.292541@0] bad block 42b
- [ 8.298423@0] ########aml_nand_read_page_hwecc 2783 read ecc failed here at at page:23296, blk:91 chip[0]
- [ 8.304906@0] NAND detect Bad block at b600000
- [ 8.309491@0] bad block 42b
- [ 8.593016@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 8.593055@0] HDMI irq 1
- [ 8.595378@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 8.725846@0] second 512,450
- [ 8.928193@0] nftl ok!
- [ 8.928614@0] aml_nftl_blk->mbd.tr.name =system
- [ 8.930313@1] aml_nftl_init_bounce_buf, use cache here
- [ 8.934972@0] system: unknown partition table
- [ 8.939367@0] _nftl_init_bounce_buf already init 1000
- [ 8.944047@0] aml_nftl_add_mtd ok
- [ 8.947368@0] mtd->name: cache
- [ 8.950366@0] nftl version 130502a
- [ 9.121088@0] nftl start:256,32
- [ 9.121655@0] first
- [ 9.362193@0] second 256,224
- [ 9.423643@0] nftl ok!
- [ 9.423971@0] aml_nftl_blk->mbd.tr.name =cache
- [ 9.425612@1] aml_nftl_init_bounce_buf, use cache here
- [ 9.430398@0] cache: unknown partition table
- [ 9.434564@0] _nftl_init_bounce_buf already init 1000
- [ 9.439341@0] aml_nftl_add_mtd ok
- [ 9.442595@0] mtd->name: backup
- [ 9.445717@0] nftl version 130502a
- [ 9.534090@0] nftl start:128,16
- [ 9.534417@0] first
- [ 9.657299@0] second 128,112
- [ 9.657317@0] nftl ok!
- [ 9.657603@0] aml_nftl_blk->mbd.tr.name =backup
- [ 9.662091@1] aml_nftl_init_bounce_buf, use cache here
- [ 9.666577@0] backup: unknown partition table
- [ 9.671280@0] _nftl_init_bounce_buf already init 1000
- [ 9.675993@0] aml_nftl_add_mtd ok
- [ 9.679335@0] mtd->name: userdata
- [ 9.682593@0] nftl version 130502a
- [ 10.642866@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 10.642906@0] HDMI irq 2
- [ 10.645319@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 11.064210@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 11.064246@0] HDMI irq 1
- [ 11.066568@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 11.763129@0] nftl start:3172,396
- [ 11.769155@0] first
- [ 11.914003@0] scsi 0:0:0:0: Direct-Access USB 2.0 USB Flash Drive 1.00 PQ: 0 ANSI: 2
- [ 11.917735@0] sd 0:0:0:0: [sda] 15859712 512-byte logical blocks: (8.12 GB/7.56 GiB)
- [ 11.927196@1] sd 0:0:0:0: [sda] Write Protect is off
- [ 11.929301@1] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
- [ 11.934657@1] sd 0:0:0:0: [sda] No Caching mode page found
- [ 11.940014@1] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 11.947551@1] sd 0:0:0:0: [sda] No Caching mode page found
- [ 11.951693@1] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 11.958743@1] sda: sda1
- [ 11.964250@1] sd 0:0:0:0: [sda] No Caching mode page found
- [ 11.965928@1] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 11.972213@1] sd 0:0:0:0: [sda] Attached SCSI removable disk
- [ 13.101379@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 13.101416@0] HDMI irq 2
- [ 13.103826@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 13.522726@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 13.522763@0] HDMI irq 1
- [ 13.525085@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 14.760006@0] second 3172,2776
- [ 15.448562@0] nftl ok!
- [ 15.449212@0] aml_nftl_blk->mbd.tr.name =data
- [ 15.450331@1] aml_nftl_init_bounce_buf, use cache here
- [ 15.455158@0] data: unknown partition table
- [ 15.459420@0] _nftl_init_bounce_buf already init 1000
- [ 15.464046@0] aml_nftl_add_mtd ok
- [ 15.467404@0] init_aml_nftl end
- [ 15.470479@0] ethernetinit(dbg[c0858034]=1)
- [ 15.474661@0] ethernet base addr is f3610000
- [ 15.478929@0] set_phy_mode() phy_Identifier: 0x0
- [ 15.483625@0] ethernet: MII PHY 0007c0f1h found at address 1, status 0x7829 advertising 01e1.
- [ 15.492093@0] find phy phy_Identifier=7c0f1
- [ 15.496163@0] write mac add to:dfb3a548: c4 4e ac 04 da 56 |.N...V|
- [ 15.502858@0] eth0: mixed no checksumming and other settings.
- [ 15.508612@1] Amlogic A/V streaming port init
- [ 15.515809@1] regist mpeg12 codec profile
- [ 15.516563@1] regist mpeg4 codec profile
- [ 15.520403@1] amvdec_vc1 module init
- [ 15.524039@1] regist vc1 codec profile
- [ 15.527682@1] amvdec_h264 module init
- [ 15.531416@1] regist h264 codec profile
- [ 15.535128@1] amvdec_h264mvc module init
- [ 15.539264@1] regist mjpeg codec profile
- [ 15.542940@1] amvdec_real module init
- [ 15.546687@1] regist real codec profile
- [ 15.551425@1] request_fiq:152: fiq=35
- [ 15.554052@1] request_fiq:186: end
- [ 15.558270@1] request_fiq:152: fiq=45
- [ 15.561087@1] request_fiq:186: end
- [ 15.564470@1] video2_init exit
- [ 15.567779@1] SARADC Driver init.
- [ 15.571058@1] Remote Driver
- [ 15.572825@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 15.572838@0] HDMI irq 2
- [ 15.572844@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 15.587482@1] input: aml_keypad as /devices/platform/meson-remote/input/input2
- [ 15.595056@1] meson_remote_pinmux_setup()
- [ 15.598335@1] Remote platform_data g_remote_base=f3100480
- [ 15.603701@1] Remote date_valye======0,status == 8915f20
- [ 15.609033@1] remote config major:245
- [ 15.613200@1] physical address:0x9f26c000
- [ 15.616821@1] ADC Keypad Driver init.
- [ 15.620429@1] chan #4 used for ADC key
- [ 15.624099@1] ok key(232) registed.
- [ 15.627581@1] home key(102) registed.
- [ 15.631216@1] back key(158) registed.
- [ 15.634861@1] vol+ key(115) registed.
- [ 15.638515@1] vol- key(114) registed.
- [ 15.642152@1] menu key(139) registed.
- [ 15.645987@1] input: adc_keypad as /devices/platform/m1-adckp.0/input/input3
- [ 15.653190@1] adc keypad register input device completed.
- [ 15.658333@1] adc keypad major:244
- [ 15.662294@1] Meson KeyInput init
- [ 15.665118@1] Key 116 registed.
- [ 15.668386@1] input: key_input as /devices/platform/meson-keyinput.0/input/input4
- [ 15.675981@1] Meson KeyInput register RTC interrupt
- [ 15.680381@1] Meson KeyInput major=243
- [ 15.685155@1] spi_nor apollospi:0: unrecognized JEDEC id ffffff
- [ 15.690623@1] Memory Card media Major: 253
- [ 15.694359@1] card max_req_size is 128K
- [ 15.698829@1] card creat process sucessful
- [ 15.702353@1] [dsp]DSP start addr 0xc4000000
- [ 15.706502@1] [dsp]register dsp to char divece(232)
- [ 15.715781@1] DSP pcmenc stream buffer to [0x9d801000-0x9da01000]
- [ 15.717562@1] amlogic audio dsp pcmenc device init!
- [ 15.722910@1] amlogic audio spdif interface device init!
- [ 15.728674@1] using rtc device, aml_rtc, for alarms
- [ 15.732277@1] aml_rtc aml_rtc: rtc core: registered aml_rtc as rtc0
- [ 15.739513@1] efuse===========================================
- [ 15.744974@1] efuse: device efuse created
- [ 15.748753@1] efuse--------------------------------------------
- [ 15.754510@1] platform_driver_register--aml_keys_driver--------------------
- [ 15.762494@1] aml_dvb_init
- [ 15.764170@1] dvb_io_setup start
- [ 15.767341@1] DVB: registering new adapter (amlogic-dvb)
- [ 15.776122@1] DVB: async fifo 0 buf size 524288, flush size 262144
- [ 15.778950@1] DVB: async fifo 1 buf size 524288, flush size 262144
- [ 15.785363@1] init avl6211 frontend 0
- [ 15.788609@1] DVB: cannot get resource "frontend0_LNBON/OFF"
- [ 15.794227@1] DVB: cannot get resource "frontend0_POWERON/OFF"
- [ 15.800054@1] DVB: cannot get resource "frontend0_ANTOVERLOAD"
- [ 15.805864@1] DVB: registering adapter 0 frontend 0 (AMLOGIC DVB-S2)...
- [ 15.813396@1] Smartcard: cannot get resource "smc0_reset"
- [ 15.818292@1] SMC CLK SOURCE - 200000KHz
- [ 15.821849@1] RTL871X: rtl8188eu driver version=v4.1.4_6773.20130222
- [ 15.828090@1] RTL871X: build time: Apr 17 2014 12:00:26
- [ 15.833451@1] usbcore: registered new interface driver rtl8188eu
- [ 15.840076@1] aml_hw_crypto initialization.
- [ 15.844265@1] usbcore: registered new interface driver snd-usb-audio
- [ 15.850691@1] enter aml_dai_probe
- [ 15.853298@1] enter dummy_codec_audio_probe
- [ 15.858170@1] aml-pcm 0:playback preallocate_dma_buffer: area=ffd80000, addr=9df00000, size=131072
- [ 15.867622@1] iec958 0: preallocate dma buffer start=ffd00000, size=80000
- [ 15.873665@1] aml-pcm 1:capture preallocate_dma_buffer: area=ffce0000, addr=9df40000, size=65536
- [ 15.881750@1] asoc: dummy_codec <-> aml-dai0 mapping ok
- [ 15.888418@1] ALSA device list:
- [ 15.890054@1] #0: AML-DUMMY-CODEC
- [ 15.893749@1] TCP cubic registered
- [ 15.896915@1] NET: Registered protocol family 17
- [ 15.901693@1] NET: Registered protocol family 15
- [ 15.906202@1] Registering the dns_resolver key type
- [ 15.911036@1] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- [ 15.918896@1] enter meson_pm_probe!
- [ 15.922260@1] meson_pm_probe done !
- [ 15.928317@1] aml_rtc aml_rtc: setting system clock to 1970-01-01 00:00:19 UTC (19)
- [ 15.933372@1] CEC not init
- [ 15.947151@1] Changing baud from 0 to 115200
- [ 15.994204@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 15.994309@0] HDMI irq 1
- [ 15.996591@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 16.038648@1] EXT4-fs (system): recovery complete
- [ 16.039971@1] EXT4-fs (system): mounted filesystem with ordered data mode. Opts: (null)
- [ 16.045741@1] VFS: Mounted root (ext4 filesystem) on device 250:20.
- [ 16.053411@1] devtmpfs: mounted
- [ 16.055131@1] Freeing init memory: 172K
- [ 16.258600@0] EXT4-fs (system): re-mounted. Opts: (null)
- [ 16.307333@0] EXT4-fs (system): re-mounted. Opts: (null)
- [ 16.688468@0] EXT4-fs (system): re-mounted. Opts: (null)
- [ 17.202736@0] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: (null)
- [ 17.437472@1] udevd[1641]: starting version 182
- [ 18.031765@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 18.031835@0] HDMI irq 2
- [ 18.034220@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 18.453117@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 18.453186@0] HDMI irq 1
- [ 18.455487@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 20.503154@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 20.503195@0] HDMI irq 2
- [ 20.505606@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 20.924498@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 20.924536@0] HDMI irq 1
- [ 20.926855@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 22.962159@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 22.962194@0] HDMI irq 2
- [ 22.964609@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 23.383520@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 23.383565@0] HDMI irq 1
- [ 23.385884@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 25.433433@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 25.433469@0] HDMI irq 2
- [ 25.435884@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 25.854784@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 25.854822@0] HDMI irq 1
- [ 25.857142@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 27.892601@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 27.892636@0] HDMI irq 2
- [ 27.895050@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 28.313961@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 28.314005@0] HDMI irq 1
- [ 28.316326@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 28.425285@1] netdev_open
- [ 28.425313@1] Ethernet reset
- [ 28.425331@1] NET MDA descpter start addr=df913000
- [ 28.430215@1] phy_reset!
- [ 28.432428@1] set_phy_mode() phy_Identifier: 0x7c0f1
- [ 28.437783@1] --1--write mac add to:dfb3a548: c4 4e ac 04 da 56 |.N...V|
- [ 28.444057@1] --2--write mac add to:dfb3a548: c4 4e ac 04 da 56 |.N...V|
- [ 28.450741@1] write mac add to:dfb3a548: c4 4e ac 04 da 56 |.N...V|
- [ 28.456992@1] Current DMA mode=0, set mode=621c100
- [ 28.461899@1] eth0: opened (irq 40).
- [ 28.465327@1] ether leave promiscuous mode
- [ 28.469414@1] ether leave all muticast mode
- [ 28.473646@1] changed the Multicast,mcount=1
- [ 28.477839@1] add mac address:01:00:5e:00:00:01,bit=32
- [ 28.482945@1] set hash low=0,high=1
- [ 28.486416@1] changed the filter setting to :4
- [ 28.509386@1] changed the Multicast,mcount=1
- [ 28.509420@1] add mac address:01:00:5e:00:00:01,bit=32
- [ 30.363309@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 30.363350@0] HDMI irq 2
- [ 30.365761@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 30.467183@1] duplex
- [ 30.467200@1] 100m
- [ 30.784660@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 30.784700@0] HDMI irq 1
- [ 30.787019@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 32.754644@0] changed the Multicast,mcount=1
- [ 32.754692@0] add mac address:01:00:5e:00:00:01,bit=32
- [ 32.759214@0] changed the Multicast,mcount=1
- [ 32.762660@0] add mac address:01:00:5e:00:00:01,bit=32
- [ 32.822967@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 32.823029@0] HDMI irq 2
- [ 32.825435@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 32.906119@1] Ethernet Driver ioctl (8947)
- [ 32.906187@1] Ethernet Driver ioctl (8948)
- [ 33.244323@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 33.244395@0] HDMI irq 1
- [ 33.246688@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 35.146049@1] Ethernet Driver ioctl (8947)
- [ 35.146101@1] Ethernet Driver ioctl (8948)
- [ 35.293279@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 35.293315@0] HDMI irq 2
- [ 35.295724@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 35.714629@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 35.714667@0] HDMI irq 1
- [ 35.716991@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 36.149719@1] Ethernet Driver ioctl (8947)
- [ 36.149767@1] Ethernet Driver ioctl (8948)
- [ 36.466830@1] changed the Multicast,mcount=2
- [ 36.466865@1] add mac address:01:00:5e:00:00:01,bit=32
- [ 36.470604@1] add mac address:01:00:5e:00:00:fb,bit=48
- [ 36.475699@1] set hash low=0,high=10001
- [ 36.479531@1] changed the filter setting to :4
- [ 36.574864@1] UMP<2>: Inserting UMP device driver. Compiled: Apr 17 2014, time: 12:06:52
- [ 36.580123@1] UMP<2>: Using OS memory backend, allocation limit: 268435456
- [ 36.584174@1] UMP: UMP device driver 0000 loaded
- [ 36.603452@1] mail version=-1
- [ 36.603493@1] Mali pp1 MMU register mapped at e005e000...
- [ 36.606407@1] Mali pp2 MMU register mapped at e00fe000...
- [ 36.661766@1] mali_meson_poweron: Interrupt received.
- [ 36.712569@1] mail version=1
- [ 36.762664@1] mali_meson_poweron: Interrupt received.
- [ 36.812993@1] mail version=1
- [ 36.816783@1] Mali: Mali device driver loaded
- [ 36.849452@0] warning: `proftpd' uses 32-bit capabilities (legacy support in use)
- [ 37.153360@1] Ethernet Driver ioctl (8947)
- [ 37.153417@1] Ethernet Driver ioctl (8948)
- [ 37.753356@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 37.753411@0] HDMI irq 2
- [ 37.755812@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 38.157007@1] Ethernet Driver ioctl (8947)
- [ 38.157064@1] Ethernet Driver ioctl (8948)
- [ 38.174701@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 38.174748@0] HDMI irq 1
- [ 38.177070@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 39.160726@1] Ethernet Driver ioctl (8947)
- [ 39.160782@1] Ethernet Driver ioctl (8948)
- [ 40.091394@1] buf=0
- [ 40.091416@1] IEC958_mode_raw=0
- [ 40.095213@1] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 40.097739@1] ====== audio_set_aiubuf ======
- [ 40.101239@1] I2S hw init,i2s mode 2
- [ 40.104697@1] iec958 mode PCM24
- [ 40.107996@1] IEC958 24bit
- [ 40.110513@1] iec958 nodify hdmi audio type 1
- [ 40.114880@1] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 40.121319@1] HDMI: aout notify rate 44100
- [ 40.125375@1] HDMI: aout notify format PCM
- [ 40.129463@1] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 40.135876@1] HDMI: aout notify rate 44100
- [ 40.140080@1] HDMI: aout notify format PCM
- [ 40.144826@1] ====== audio_set_aiubuf ======
- [ 40.148398@1] I2S hw init,i2s mode 2
- [ 40.151830@1] iec958 mode PCM24
- [ 40.154956@1] IEC958 24bit
- [ 40.157784@1] iec958 nodify hdmi audio type 1
- [ 40.162013@1] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 40.168472@1] Ethernet Driver ioctl (8947)
- [ 40.172660@1] Ethernet Driver ioctl (8948)
- [ 40.176606@1] HDMI: aout notify rate 44100
- [ 40.180661@1] HDMI: aout notify format PCM
- [ 40.184820@1] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 40.191165@1] HDMI: aout notify rate 44100
- [ 40.195292@1] HDMI: aout notify format PCM
- [ 40.224024@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 40.224084@0] HDMI irq 2
- [ 40.226488@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 40.645379@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 40.645428@0] HDMI irq 1
- [ 40.647746@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 41.125878@1] UMP<2>: New session opened
- [ 41.177230@1] Ethernet Driver ioctl (8947)
- [ 41.177300@1] Ethernet Driver ioctl (8948)
- [ 41.336079@0] UMP<2>: Session closed
- [ 42.180839@1] Ethernet Driver ioctl (8947)
- [ 42.180891@1] Ethernet Driver ioctl (8948)
- [ 42.683568@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 42.683608@0] HDMI irq 2
- [ 42.686018@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 42.764540@0] buf=0
- [ 42.764562@0] IEC958_mode_raw=0
- [ 42.768969@0] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 42.770446@0] ====== audio_set_aiubuf ======
- [ 42.774360@0] I2S hw init,i2s mode 2
- [ 42.777956@0] iec958 mode PCM24
- [ 42.780984@0] IEC958 24bit
- [ 42.783669@0] iec958 nodify hdmi audio type 1
- [ 42.788055@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 42.794436@0] HDMI: aout notify rate 44100
- [ 42.798618@0] HDMI: aout notify format PCM
- [ 42.802594@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 42.809059@0] HDMI: aout notify rate 44100
- [ 42.813100@0] HDMI: aout notify format PCM
- [ 42.818076@0] ====== audio_set_aiubuf ======
- [ 42.821480@0] I2S hw init,i2s mode 2
- [ 42.824991@0] iec958 mode PCM24
- [ 42.828171@0] IEC958 24bit
- [ 42.830804@0] iec958 nodify hdmi audio type 1
- [ 42.835141@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 42.841604@0] HDMI: aout notify rate 44100
- [ 42.845649@0] HDMI: aout notify format PCM
- [ 42.849758@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 42.856148@0] HDMI: aout notify rate 44100
- [ 42.860258@0] HDMI: aout notify format PCM
- [ 43.104928@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 43.104975@0] HDMI irq 1
- [ 43.107294@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 43.184466@1] Ethernet Driver ioctl (8947)
- [ 43.184529@1] Ethernet Driver ioctl (8948)
- [ 43.518012@1] UMP<2>: New session opened
- [ 43.688862@0] UMP<2>: Session closed
- [ 44.187173@1] Ethernet Driver ioctl (8947)
- [ 44.187227@1] Ethernet Driver ioctl (8948)
- [ 45.115343@0] buf=0
- [ 45.115366@0] IEC958_mode_raw=0
- [ 45.119757@0] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 45.121250@0] ====== audio_set_aiubuf ======
- [ 45.125229@0] I2S hw init,i2s mode 2
- [ 45.128735@0] iec958 mode PCM24
- [ 45.131782@0] IEC958 24bit
- [ 45.134473@0] iec958 nodify hdmi audio type 1
- [ 45.138885@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 45.145243@0] HDMI: aout notify rate 44100
- [ 45.149380@0] HDMI: aout notify format PCM
- [ 45.153397@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 45.159842@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 45.165368@0] HDMI irq 2
- [ 45.167882@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 45.173400@0] HDMI: aout notify rate 44100
- [ 45.177463@0] HDMI: aout notify format PCM
- [ 45.182389@0] ====== audio_set_aiubuf ======
- [ 45.185818@0] I2S hw init,i2s mode 2
- [ 45.189404@0] iec958 mode PCM24
- [ 45.190244@1] Ethernet Driver ioctl (8947)
- [ 45.190276@1] Ethernet Driver ioctl (8948)
- [ 45.200677@0] IEC958 24bit
- [ 45.203306@0] iec958 nodify hdmi audio type 1
- [ 45.207688@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 45.214072@0] HDMI: aout notify rate 44100
- [ 45.218197@0] HDMI: aout notify format PCM
- [ 45.222232@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 45.228688@0] HDMI: aout notify rate 44100
- [ 45.232729@0] HDMI: aout notify format PCM
- [ 45.575581@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 45.575625@0] HDMI irq 1
- [ 45.577942@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 45.856642@0] UMP<2>: New session opened
- [ 46.021787@0] UMP<2>: Session closed
- [ 46.191357@1] Ethernet Driver ioctl (8947)
- [ 46.191412@1] Ethernet Driver ioctl (8948)
- [ 47.194971@1] Ethernet Driver ioctl (8947)
- [ 47.195026@1] Ethernet Driver ioctl (8948)
- [ 47.439266@0] buf=0
- [ 47.439289@0] IEC958_mode_raw=0
- [ 47.443156@0] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 47.445188@0] ====== audio_set_aiubuf ======
- [ 47.449456@0] I2S hw init,i2s mode 2
- [ 47.452590@0] iec958 mode PCM24
- [ 47.455711@0] IEC958 24bit
- [ 47.458677@0] iec958 nodify hdmi audio type 1
- [ 47.462748@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 47.469217@0] HDMI: aout notify rate 44100
- [ 47.473248@0] HDMI: aout notify format PCM
- [ 47.477369@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 47.483829@0] HDMI: aout notify rate 44100
- [ 47.487891@0] HDMI: aout notify format PCM
- [ 47.492793@0] ====== audio_set_aiubuf ======
- [ 47.496206@0] I2S hw init,i2s mode 2
- [ 47.499782@0] iec958 mode PCM24
- [ 47.502961@0] IEC958 24bit
- [ 47.505522@0] iec958 nodify hdmi audio type 1
- [ 47.509916@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 47.516370@0] HDMI: aout notify rate 44100
- [ 47.520415@0] HDMI: aout notify format PCM
- [ 47.524456@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 47.530906@0] HDMI: aout notify rate 44100
- [ 47.535004@0] HDMI: aout notify format PCM
- [ 47.613856@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 47.613896@0] HDMI irq 2
- [ 47.616310@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 48.035211@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 48.035259@0] HDMI irq 1
- [ 48.037576@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 48.166820@0] UMP<2>: New session opened
- [ 48.198808@1] Ethernet Driver ioctl (8947)
- [ 48.198866@1] Ethernet Driver ioctl (8948)
- [ 48.337392@0] UMP<2>: Session closed
- [ 49.202430@1] Ethernet Driver ioctl (8947)
- [ 49.202485@1] Ethernet Driver ioctl (8948)
- [ 49.754839@0] buf=0
- [ 49.754862@0] IEC958_mode_raw=0
- [ 49.759162@0] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 49.760760@0] ====== audio_set_aiubuf ======
- [ 49.764654@0] I2S hw init,i2s mode 2
- [ 49.768409@0] iec958 mode PCM24
- [ 49.771277@0] IEC958 24bit
- [ 49.773972@0] iec958 nodify hdmi audio type 1
- [ 49.778362@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 49.784735@0] HDMI: aout notify rate 44100
- [ 49.788869@0] HDMI: aout notify format PCM
- [ 49.792895@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 49.799352@0] HDMI: aout notify rate 44100
- [ 49.803391@0] HDMI: aout notify format PCM
- [ 49.808370@0] ====== audio_set_aiubuf ======
- [ 49.811825@0] I2S hw init,i2s mode 2
- [ 49.815288@0] iec958 mode PCM24
- [ 49.818478@0] IEC958 24bit
- [ 49.821102@0] iec958 nodify hdmi audio type 1
- [ 49.825444@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 49.831901@0] HDMI: aout notify rate 44100
- [ 49.835942@0] HDMI: aout notify format PCM
- [ 49.840059@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 49.846451@0] HDMI: aout notify rate 44100
- [ 49.850552@0] HDMI: aout notify format PCM
- [ 50.084541@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 50.084585@0] HDMI irq 2
- [ 50.086994@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 50.206047@1] Ethernet Driver ioctl (8947)
- [ 50.206108@1] Ethernet Driver ioctl (8948)
- [ 50.505891@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 50.505935@0] HDMI irq 1
- [ 50.508252@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 50.542496@0] UMP<2>: New session opened
- [ 50.711030@0] UMP<2>: Session closed
- [ 51.210061@1] Ethernet Driver ioctl (8947)
- [ 51.210115@1] Ethernet Driver ioctl (8948)
- [ 52.129181@0] buf=0
- [ 52.129204@0] IEC958_mode_raw=0
- [ 52.133069@0] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 52.135098@0] ====== audio_set_aiubuf ======
- [ 52.139384@0] I2S hw init,i2s mode 2
- [ 52.142508@0] iec958 mode PCM24
- [ 52.145626@0] IEC958 24bit
- [ 52.148428@0] iec958 nodify hdmi audio type 1
- [ 52.152660@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 52.159136@0] HDMI: aout notify rate 44100
- [ 52.163156@0] HDMI: aout notify format PCM
- [ 52.167291@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 52.173660@0] HDMI: aout notify rate 44100
- [ 52.177780@0] HDMI: aout notify format PCM
- [ 52.182687@0] ====== audio_set_aiubuf ======
- [ 52.186125@0] I2S hw init,i2s mode 2
- [ 52.189700@0] iec958 mode PCM24
- [ 52.192763@0] IEC958 24bit
- [ 52.195444@0] iec958 nodify hdmi audio type 1
- [ 52.199828@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 52.206210@0] HDMI: aout notify rate 44100
- [ 52.210332@0] HDMI: aout notify format PCM
- [ 52.213686@1] Ethernet Driver ioctl (8947)
- [ 52.213717@1] Ethernet Driver ioctl (8948)
- [ 52.222575@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 52.228988@0] HDMI: aout notify rate 44100
- [ 52.233028@0] HDMI: aout notify format PCM
- [ 52.544291@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 52.544333@0] HDMI irq 2
- [ 52.546741@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 52.864078@0] UMP<2>: New session opened
- [ 52.965644@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 52.965690@0] HDMI irq 1
- [ 52.968008@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 53.051048@0] UMP<2>: Session closed
- [ 53.214800@1] Ethernet Driver ioctl (8947)
- [ 53.214853@1] Ethernet Driver ioctl (8948)
- [ 54.218733@1] Ethernet Driver ioctl (8947)
- [ 54.218787@1] Ethernet Driver ioctl (8948)
- [ 54.470797@0] buf=0
- [ 54.470821@0] IEC958_mode_raw=0
- [ 54.474798@0] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 54.476697@0] ====== audio_set_aiubuf ======
- [ 54.480816@0] I2S hw init,i2s mode 2
- [ 54.484120@0] iec958 mode PCM24
- [ 54.487498@0] IEC958 24bit
- [ 54.489926@0] iec958 nodify hdmi audio type 1
- [ 54.494259@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 54.500740@0] HDMI: aout notify rate 44100
- [ 54.504776@0] HDMI: aout notify format PCM
- [ 54.508895@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 54.515271@0] HDMI: aout notify rate 44100
- [ 54.519383@0] HDMI: aout notify format PCM
- [ 54.524260@0] ====== audio_set_aiubuf ======
- [ 54.527829@0] I2S hw init,i2s mode 2
- [ 54.531246@0] iec958 mode PCM24
- [ 54.534366@0] IEC958 24bit
- [ 54.537055@0] iec958 nodify hdmi audio type 1
- [ 54.541534@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 54.547870@0] HDMI: aout notify rate 44100
- [ 54.551900@0] HDMI: aout notify format PCM
- [ 54.555980@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 54.562444@0] HDMI: aout notify rate 44100
- [ 54.566479@0] HDMI: aout notify format PCM
- [ 55.015195@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 55.015248@0] HDMI irq 2
- [ 55.017651@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 55.222409@1] Ethernet Driver ioctl (8947)
- [ 55.222479@1] Ethernet Driver ioctl (8948)
- [ 55.228071@1] UMP<2>: New session opened
- [ 55.385736@0] UMP<2>: Session closed
- [ 55.436542@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 55.436586@0] HDMI irq 1
- [ 55.438908@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 56.226021@1] Ethernet Driver ioctl (8947)
- [ 56.226073@1] Ethernet Driver ioctl (8948)
- [ 56.802533@0] buf=0
- [ 56.802555@0] IEC958_mode_raw=0
- [ 56.806436@0] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 56.808897@0] ====== audio_set_aiubuf ======
- [ 56.812347@0] I2S hw init,i2s mode 2
- [ 56.815849@0] iec958 mode PCM24
- [ 56.819040@0] IEC958 24bit
- [ 56.821663@0] iec958 nodify hdmi audio type 1
- [ 56.826050@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 56.832475@0] HDMI: aout notify rate 44100
- [ 56.836509@0] HDMI: aout notify format PCM
- [ 56.840631@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 56.847005@0] HDMI: aout notify rate 44100
- [ 56.851114@0] HDMI: aout notify format PCM
- [ 56.856000@0] ====== audio_set_aiubuf ======
- [ 56.859555@0] I2S hw init,i2s mode 2
- [ 56.862981@0] iec958 mode PCM24
- [ 56.866104@0] IEC958 24bit
- [ 56.868829@0] iec958 nodify hdmi audio type 1
- [ 56.873133@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 56.879605@0] HDMI: aout notify rate 44100
- [ 56.883633@0] HDMI: aout notify format PCM
- [ 56.887747@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 56.894144@0] HDMI: aout notify rate 44100
- [ 56.898246@0] HDMI: aout notify format PCM
- [ 57.229699@1] Ethernet Driver ioctl (8947)
- [ 57.229758@1] Ethernet Driver ioctl (8948)
- [ 57.474518@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 57.474561@0] HDMI irq 2
- [ 57.476972@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 57.525773@0] UMP<2>: New session opened
- [ 57.691766@0] UMP<2>: Session closed
- [ 57.895891@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 57.895935@0] HDMI irq 1
- [ 57.898256@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 58.233309@1] Ethernet Driver ioctl (8947)
- [ 58.233359@1] Ethernet Driver ioctl (8948)
- [ 59.111070@0] buf=0
- [ 59.111093@0] IEC958_mode_raw=0
- [ 59.114961@0] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 59.116967@0] ====== audio_set_aiubuf ======
- [ 59.121279@0] I2S hw init,i2s mode 2
- [ 59.124400@0] iec958 mode PCM24
- [ 59.127575@0] IEC958 24bit
- [ 59.130203@0] iec958 nodify hdmi audio type 1
- [ 59.134542@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 59.141008@0] HDMI: aout notify rate 44100
- [ 59.145044@0] HDMI: aout notify format PCM
- [ 59.149165@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 59.155547@0] HDMI: aout notify rate 44100
- [ 59.159664@0] HDMI: aout notify format PCM
- [ 59.164546@0] ====== audio_set_aiubuf ======
- [ 59.168211@0] I2S hw init,i2s mode 2
- [ 59.171525@0] iec958 mode PCM24
- [ 59.174640@0] IEC958 24bit
- [ 59.177385@0] iec958 nodify hdmi audio type 1
- [ 59.181675@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 59.188134@0] HDMI: aout notify rate 44100
- [ 59.192185@0] HDMI: aout notify format PCM
- [ 59.196254@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 59.202711@0] HDMI: aout notify rate 44100
- [ 59.206757@0] HDMI: aout notify format PCM
- [ 59.236945@1] Ethernet Driver ioctl (8947)
- [ 59.236999@1] Ethernet Driver ioctl (8948)
- [ 59.873575@1] UMP<2>: New session opened
- [ 59.945183@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 59.945226@0] HDMI irq 2
- [ 59.947639@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 60.051473@0] UMP<2>: Session closed
- [ 60.240946@1] Ethernet Driver ioctl (8947)
- [ 60.240998@1] Ethernet Driver ioctl (8948)
- [ 60.366533@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 60.366577@0] HDMI irq 1
- [ 60.368897@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 61.244612@1] Ethernet Driver ioctl (8947)
- [ 61.244687@1] Ethernet Driver ioctl (8948)
- [ 61.468106@0] buf=0
- [ 61.468129@0] IEC958_mode_raw=0
- [ 61.472036@0] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 61.474027@0] ====== audio_set_aiubuf ======
- [ 61.478028@0] I2S hw init,i2s mode 2
- [ 61.481430@0] iec958 mode PCM24
- [ 61.484551@0] IEC958 24bit
- [ 61.487283@0] iec958 nodify hdmi audio type 1
- [ 61.491700@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 61.498123@0] HDMI: aout notify rate 44100
- [ 61.502080@0] HDMI: aout notify format PCM
- [ 61.506160@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 61.512632@0] HDMI: aout notify rate 44100
- [ 61.516746@0] HDMI: aout notify format PCM
- [ 61.521685@0] ====== audio_set_aiubuf ======
- [ 61.525046@0] I2S hw init,i2s mode 2
- [ 61.528623@0] iec958 mode PCM24
- [ 61.531686@0] IEC958 24bit
- [ 61.534364@0] iec958 nodify hdmi audio type 1
- [ 61.538751@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 61.545229@0] HDMI: aout notify rate 44100
- [ 61.549295@0] HDMI: aout notify format PCM
- [ 61.553296@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 61.559750@0] HDMI: aout notify rate 44100
- [ 61.563798@0] HDMI: aout notify format PCM
- [ 62.192317@0] UMP<2>: New session opened
- [ 62.248629@1] Ethernet Driver ioctl (8947)
- [ 62.248693@1] Ethernet Driver ioctl (8948)
- [ 62.361499@0] UMP<2>: Session closed
- [ 62.404909@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 62.404952@0] HDMI irq 2
- [ 62.407360@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 62.826255@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 62.826293@0] HDMI irq 1
- [ 62.828618@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 63.252240@1] Ethernet Driver ioctl (8947)
- [ 63.252290@1] Ethernet Driver ioctl (8948)
- [ 63.778973@0] buf=0
- [ 63.778995@0] IEC958_mode_raw=0
- [ 63.782927@0] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 63.784882@0] ====== audio_set_aiubuf ======
- [ 63.789140@0] I2S hw init,i2s mode 2
- [ 63.792290@0] iec958 mode PCM24
- [ 63.795406@0] IEC958 24bit
- [ 63.798259@0] iec958 nodify hdmi audio type 1
- [ 63.802443@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 63.808908@0] HDMI: aout notify rate 44100
- [ 63.813015@0] HDMI: aout notify format PCM
- [ 63.817022@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 63.823488@0] HDMI: aout notify rate 44100
- [ 63.827551@0] HDMI: aout notify format PCM
- [ 63.832434@0] ====== audio_set_aiubuf ======
- [ 63.835911@0] I2S hw init,i2s mode 2
- [ 63.839721@0] iec958 mode PCM24
- [ 63.842547@0] IEC958 24bit
- [ 63.845226@0] iec958 nodify hdmi audio type 1
- [ 63.849607@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 63.856078@0] HDMI: aout notify rate 44100
- [ 63.860109@0] HDMI: aout notify format PCM
- [ 63.864204@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 63.870609@0] HDMI: aout notify rate 44100
- [ 63.874708@0] HDMI: aout notify format PCM
- [ 64.255882@1] Ethernet Driver ioctl (8947)
- [ 64.255942@1] Ethernet Driver ioctl (8948)
- [ 64.526255@0] UMP<2>: New session opened
- [ 64.692936@0] UMP<2>: Session closed
- [ 64.875235@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 64.875275@0] HDMI irq 2
- [ 64.877688@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 65.260032@1] Ethernet Driver ioctl (8947)
- [ 65.260082@1] Ethernet Driver ioctl (8948)
- [ 65.296580@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 65.296619@0] HDMI irq 1
- [ 65.298937@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 66.109621@0] buf=0
- [ 66.109643@0] IEC958_mode_raw=0
- [ 66.113569@0] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 66.115516@0] ====== audio_set_aiubuf ======
- [ 66.119748@0] I2S hw init,i2s mode 2
- [ 66.122941@0] iec958 mode PCM24
- [ 66.126060@0] IEC958 24bit
- [ 66.129041@0] iec958 nodify hdmi audio type 1
- [ 66.133090@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 66.139645@0] HDMI: aout notify rate 44100
- [ 66.143595@0] HDMI: aout notify format PCM
- [ 66.147842@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 66.154089@0] HDMI: aout notify rate 44100
- [ 66.158279@0] HDMI: aout notify format PCM
- [ 66.163102@0] ====== audio_set_aiubuf ======
- [ 66.166555@0] I2S hw init,i2s mode 2
- [ 66.170327@0] iec958 mode PCM24
- [ 66.173196@0] IEC958 24bit
- [ 66.175879@0] iec958 nodify hdmi audio type 1
- [ 66.180364@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 66.186646@0] HDMI: aout notify rate 44100
- [ 66.190930@0] HDMI: aout notify format PCM
- [ 66.194807@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 66.201333@0] HDMI: aout notify rate 44100
- [ 66.205310@0] HDMI: aout notify format PCM
- [ 66.263683@1] Ethernet Driver ioctl (8947)
- [ 66.263740@1] Ethernet Driver ioctl (8948)
- [ 66.843015@0] UMP<2>: New session opened
- [ 67.005747@0] UMP<2>: Session closed
- [ 67.267190@0] Ethernet Driver ioctl (8947)
- [ 67.267244@0] Ethernet Driver ioctl (8948)
- [ 67.335234@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 67.335272@0] HDMI irq 2
- [ 67.337678@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 67.756584@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 67.756623@0] HDMI irq 1
- [ 67.758945@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 68.270840@0] Ethernet Driver ioctl (8947)
- [ 68.270914@0] Ethernet Driver ioctl (8948)
- [ 68.426924@0] buf=0
- [ 68.426946@0] IEC958_mode_raw=0
- [ 68.431202@0] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 68.432834@0] ====== audio_set_aiubuf ======
- [ 68.436734@0] I2S hw init,i2s mode 2
- [ 68.440502@0] iec958 mode PCM24
- [ 68.443375@0] IEC958 24bit
- [ 68.446050@0] iec958 nodify hdmi audio type 1
- [ 68.450438@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 68.456829@0] HDMI: aout notify rate 44100
- [ 68.460943@0] HDMI: aout notify format PCM
- [ 68.464980@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 68.471435@0] HDMI: aout notify rate 44100
- [ 68.475482@0] HDMI: aout notify format PCM
- [ 68.480444@0] ====== audio_set_aiubuf ======
- [ 68.483872@0] I2S hw init,i2s mode 2
- [ 68.487436@0] iec958 mode PCM24
- [ 68.490504@0] IEC958 24bit
- [ 68.493184@0] iec958 nodify hdmi audio type 1
- [ 68.497569@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 68.503955@0] HDMI: aout notify rate 44100
- [ 68.508060@0] HDMI: aout notify format PCM
- [ 68.512110@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 68.518573@0] HDMI: aout notify rate 44100
- [ 68.522612@0] HDMI: aout notify format PCM
- [ 69.141443@0] UMP<2>: New session opened
- [ 69.274489@0] Ethernet Driver ioctl (8947)
- [ 69.274543@0] Ethernet Driver ioctl (8948)
- [ 69.316215@0] UMP<2>: Session closed
- [ 69.805993@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 69.806033@0] HDMI irq 2
- [ 69.808440@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 70.227340@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 70.227379@0] HDMI irq 1
- [ 70.229698@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 70.277179@0] Ethernet Driver ioctl (8947)
- [ 70.277229@0] Ethernet Driver ioctl (8948)
- [ 70.735372@0] buf=0
- [ 70.735394@0] IEC958_mode_raw=0
- [ 70.739713@0] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 70.741285@0] ====== audio_set_aiubuf ======
- [ 70.745185@0] I2S hw init,i2s mode 2
- [ 70.748918@0] iec958 mode PCM24
- [ 70.751816@0] IEC958 24bit
- [ 70.754501@0] iec958 nodify hdmi audio type 1
- [ 70.758893@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 70.765271@0] HDMI: aout notify rate 44100
- [ 70.769389@0] HDMI: aout notify format PCM
- [ 70.773434@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 70.773440@0] HDMI: aout notify rate 44100
- [ 70.773444@0] HDMI: aout notify format PCM
- [ 70.774452@0] ====== audio_set_aiubuf ======
- [ 70.774511@0] I2S hw init,i2s mode 2
- [ 70.774516@0] iec958 mode PCM24
- [ 70.774523@0] IEC958 24bit
- [ 70.774527@0] iec958 nodify hdmi audio type 1
- [ 70.774532@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 70.774538@0] HDMI: aout notify rate 44100
- [ 70.774542@0] HDMI: aout notify format PCM
- [ 70.774547@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 70.774551@0] HDMI: aout notify rate 44100
- [ 70.774555@0] HDMI: aout notify format PCM
- [ 71.280814@0] Ethernet Driver ioctl (8947)
- [ 71.280870@0] Ethernet Driver ioctl (8948)
- [ 71.427939@0] UMP<2>: New session opened
- [ 71.593753@0] UMP<2>: Session closed
- [ 72.265490@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 72.265532@0] HDMI irq 2
- [ 72.267944@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 72.284436@0] Ethernet Driver ioctl (8947)
- [ 72.284484@0] Ethernet Driver ioctl (8948)
- [ 72.686868@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 72.686915@0] HDMI irq 1
- [ 72.689237@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 73.020163@0] buf=0
- [ 73.020186@0] IEC958_mode_raw=0
- [ 73.024158@0] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 73.026087@0] ====== audio_set_aiubuf ======
- [ 73.030508@0] I2S hw init,i2s mode 2
- [ 73.033491@0] iec958 mode PCM24
- [ 73.036601@0] IEC958 24bit
- [ 73.039473@0] iec958 nodify hdmi audio type 1
- [ 73.043648@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 73.050195@0] HDMI: aout notify rate 44100
- [ 73.054142@0] HDMI: aout notify format PCM
- [ 73.058336@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 73.064643@0] HDMI: aout notify rate 44100
- [ 73.068821@0] HDMI: aout notify format PCM
- [ 73.073666@0] ====== audio_set_aiubuf ======
- [ 73.077108@0] I2S hw init,i2s mode 2
- [ 73.080804@0] iec958 mode PCM24
- [ 73.083743@0] IEC958 24bit
- [ 73.086424@0] iec958 nodify hdmi audio type 1
- [ 73.090905@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 73.097274@0] HDMI: aout notify rate 44100
- [ 73.101270@0] HDMI: aout notify format PCM
- [ 73.105347@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 73.111899@0] HDMI: aout notify rate 44100
- [ 73.115853@0] HDMI: aout notify format PCM
- [ 73.287266@0] Ethernet Driver ioctl (8947)
- [ 73.287330@0] Ethernet Driver ioctl (8948)
- [ 73.755819@0] UMP<2>: New session opened
- [ 73.923266@0] UMP<2>: Session closed
- [ 74.290896@0] Ethernet Driver ioctl (8947)
- [ 74.290951@0] Ethernet Driver ioctl (8948)
- [ 74.736143@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 74.736181@0] HDMI irq 2
- [ 74.738593@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 75.157502@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 75.157546@0] HDMI irq 1
- [ 75.159869@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 75.294544@0] Ethernet Driver ioctl (8947)
- [ 75.294598@0] Ethernet Driver ioctl (8948)
- [ 75.351048@0] buf=0
- [ 75.351070@0] IEC958_mode_raw=0
- [ 75.354969@0] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 75.356977@0] ====== audio_set_aiubuf ======
- [ 75.361165@0] I2S hw init,i2s mode 2
- [ 75.364361@0] iec958 mode PCM24
- [ 75.367540@0] IEC958 24bit
- [ 75.370250@0] iec958 nodify hdmi audio type 1
- [ 75.374608@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 75.380999@0] HDMI: aout notify rate 44100
- [ 75.385106@0] HDMI: aout notify format PCM
- [ 75.389151@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 75.395527@0] HDMI: aout notify rate 44100
- [ 75.399632@0] HDMI: aout notify format PCM
- [ 75.404532@0] ====== audio_set_aiubuf ======
- [ 75.408075@0] I2S hw init,i2s mode 2
- [ 75.411495@0] iec958 mode PCM24
- [ 75.414629@0] IEC958 24bit
- [ 75.417350@0] iec958 nodify hdmi audio type 1
- [ 75.421652@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 75.428116@0] HDMI: aout notify rate 44100
- [ 75.432154@0] HDMI: aout notify format PCM
- [ 75.436231@0] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 75.442690@0] HDMI: aout notify rate 44100
- [ 75.446733@0] HDMI: aout notify format PCM
- [ 76.065040@1] UMP<2>: New session opened
- [ 76.239166@0] UMP<2>: Session closed
- [ 76.298482@0] Ethernet Driver ioctl (8947)
- [ 76.298537@0] Ethernet Driver ioctl (8948)
- [ 77.195831@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 77.195871@0] HDMI irq 2
- [ 77.198279@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 77.302139@0] Ethernet Driver ioctl (8947)
- [ 77.302205@0] Ethernet Driver ioctl (8948)
- [ 77.617184@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 77.617248@0] HDMI irq 1
- [ 77.619559@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 77.661199@1] buf=0
- [ 77.661230@1] IEC958_mode_raw=0
- [ 77.665008@1] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 77.667652@1] ====== audio_set_aiubuf ======
- [ 77.670989@1] I2S hw init,i2s mode 2
- [ 77.674497@1] iec958 mode PCM24
- [ 77.677683@1] IEC958 24bit
- [ 77.680432@1] iec958 nodify hdmi audio type 1
- [ 77.684654@1] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 77.691210@1] HDMI: aout notify rate 44100
- [ 77.695155@1] HDMI: aout notify format PCM
- [ 77.699429@1] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 77.705679@1] HDMI: aout notify rate 44100
- [ 77.709811@1] HDMI: aout notify format PCM
- [ 77.714667@1] ====== audio_set_aiubuf ======
- [ 77.718197@1] I2S hw init,i2s mode 2
- [ 77.721630@1] iec958 mode PCM24
- [ 77.724756@1] IEC958 24bit
- [ 77.727607@1] iec958 nodify hdmi audio type 1
- [ 77.731809@1] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 77.738306@1] HDMI: aout notify rate 44100
- [ 77.742309@1] HDMI: aout notify format PCM
- [ 77.746369@1] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 77.752845@1] HDMI: aout notify rate 44100
- [ 77.756869@1] HDMI: aout notify format PCM
- [ 78.305784@0] Ethernet Driver ioctl (8947)
- [ 78.305844@0] Ethernet Driver ioctl (8948)
- [ 78.368032@1] UMP<2>: New session opened
- [ 78.536615@1] UMP<2>: Session closed
- [ 79.309512@0] Ethernet Driver ioctl (8947)
- [ 79.309565@0] Ethernet Driver ioctl (8948)
- [ 79.666509@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 79.666552@0] HDMI irq 2
- [ 79.668963@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 79.960435@1] buf=0
- [ 79.960459@1] IEC958_mode_raw=0
- [ 79.964327@1] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 79.966312@1] ====== audio_set_aiubuf ======
- [ 79.970396@1] I2S hw init,i2s mode 2
- [ 79.973779@1] iec958 mode PCM24
- [ 79.976861@1] IEC958 24bit
- [ 79.979715@1] iec958 nodify hdmi audio type 1
- [ 79.983912@1] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 79.990493@1] HDMI: aout notify rate 44100
- [ 79.994418@1] HDMI: aout notify format PCM
- [ 79.998581@1] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 80.004916@1] HDMI: aout notify rate 44100
- [ 80.009160@1] HDMI: aout notify format PCM
- [ 80.013910@1] ====== audio_set_aiubuf ======
- [ 80.017439@1] I2S hw init,i2s mode 2
- [ 80.020867@1] iec958 mode PCM24
- [ 80.023993@1] IEC958 24bit
- [ 80.026681@1] iec958 nodify hdmi audio type 1
- [ 80.031129@1] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 80.037602@1] HDMI: aout notify rate 44100
- [ 80.041543@1] HDMI: aout notify format PCM
- [ 80.045606@1] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 80.052117@1] HDMI: aout notify rate 44100
- [ 80.056106@1] HDMI: aout notify format PCM
- [ 80.087861@0] Reg0x196 = 0x2 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 80.087909@0] HDMI irq 1
- [ 80.090234@0] Reg0x196 = 0x42 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 80.313146@0] Ethernet Driver ioctl (8947)
- [ 80.313209@0] Ethernet Driver ioctl (8948)
- [ 80.683043@0] UMP<2>: New session opened
- [ 80.852084@0] UMP<2>: Session closed
- [ 81.316772@0] Ethernet Driver ioctl (8947)
- [ 81.316825@0] Ethernet Driver ioctl (8948)
- [ 82.125733@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0x4c
- [ 82.125792@0] HDMI irq 2
- [ 82.128197@0] Reg0x196 = 0x0 Reg0x80 = 0x1 Reg0x26 = 0xc
- [ 82.268751@1] buf=0
- [ 82.268775@1] IEC958_mode_raw=0
- [ 82.272616@1] enter dummy_codec_hw_params rate: 44100 format: 6
- [ 82.274635@1] ====== audio_set_aiubuf ======
- [ 82.278644@1] I2S hw init,i2s mode 2
- [ 82.282093@1] iec958 mode PCM24
- [ 82.285177@1] IEC958 24bit
- [ 82.288027@1] iec958 nodify hdmi audio type 1
- [ 82.292232@1] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 82.298648@1] HDMI: aout notify rate 44100
- [ 82.302727@1] HDMI: aout notify format PCM
- [ 82.306789@1] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
- [ 82.313242@1] HDMI: aout notify rate 44100
- [ 82.317429@1] HDMI: aout notify format PCM
- [ 82.320456@0] Ethernet Driver ioctl (8947)
- [ 82.320488@0] Ethernet Driver ioctl (8948)
- [ 82.330426@1] ====== audio_set_aiubuf ======
- [ 82.333833@1] I2S hw init,i2s mode 2
- [ 82.337367@1] iec958 mode PCM24
- [ 82.340503@1] IEC958 24bit
- [ 82.343156@1] iec958 nodify hdmi audio type 1
- [ 82.349156@1] audio info changed.notify to hdmi: type 1,sr 44100,ch 2
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement