Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- u0_a95@flounder:/ $ su
- root@flounder:/ # dmesg
- <5>Linux version 3.10.75.[Fire-ICE]K.8.8 (USBhosts;Gate) (gcc version 5.0.x-sabermod 20150413 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Apr 19 13:21:25 PDT 2015
- <6>CPU: NVIDIA Denver 1.0 [4e0f0000] revision 0
- <6>Machine: Flounder
- <6>Found tegra_fbmem: 00c20000@ac001000
- <6>Flounder hardware revision = 128, engineer id = 0
- <6>Tegra reserved memory:
- <6>LP0: f7fff000 - f7fff7ff
- <6>Bootloader framebuffer: ac001000 - acc20fff
- <6>Bootloader framebuffer2: 00000000 - 00000000
- <6>Framebuffer: f5e00000 - f75fffff
- <6>2nd Framebuffer: 00000000 - 00000000
- <6>Tsec: 00000000 - 00000000
- <6>Tzram: f7a00000 - f7dfffff
- <6>cma: CMA: reserved 100 MiB at ef800000
- <6>cma: CMA: reserved 16 MiB at ee800000
- <7>On node 0 totalpages: 488448
- <7> DMA32 zone: 6685 pages used for memmap
- <7> DMA32 zone: 0 pages reserved
- <7> DMA32 zone: 488448 pages, LIFO batch:31
- <6>psci: probing function IDs from device-tree
- <6>DTS File Name: <unknown>
- <6>Tegra13: CPU Speedo ID 1, Soc Speedo ID 0, Gpu Speedo ID 1
- <6>Tegra13: CPU Process ID 0,Soc Process ID 1,Gpu Process ID 0
- <6>Tegra13: CPU Speedo value 2500, Soc Speedo value 2214, Gpu Speedo value 2084
- <6>Tegra Revision: A03 SKU: 0xf CPU Process: 0 Core Process: 1
- <6>tegra: PLLP fixed rate: 408000000
- <6>tegra_clk_shared_bus_user_init: c2bus client se left ON
- <6>Lowering sbus maximum rate from 420000000 to 372000000
- <6>Lowering vic03 maximum rate from 900000000 to 720000000
- <6>Lowering tsec maximum rate from 900000000 to 720000000
- <6>Lowering msenc maximum rate from 600000000 to 456000000
- <6>Lowering se maximum rate from 600000000 to 456000000
- <6>Lowering vde maximum rate from 600000000 to 456000000
- <6>Lowering host1x maximum rate from 500000000 to 408000000
- <6>Lowering vi maximum rate from 700000000 to 600000000
- <6>Lowering isp maximum rate from 700000000 to 600000000
- <6>Lowering c4bus maximum rate from 700000000 to 600000000
- <6>Lowering pll_c maximum rate from 1400000000 to 1066000000
- <6>Lowering pll_c2 maximum rate from 1200000000 to 1066000000
- <6>Lowering pll_c3 maximum rate from 1200000000 to 1066000000
- <6>Lowering hdmi maximum rate from 594000000 to 297000000
- <6>Lowering nor maximum rate from 127000000 to 102000000
- <6>Lowering sdmmc1 maximum rate from 208000000 to 204000000
- <6>Lowering sdmmc3 maximum rate from 208000000 to 204000000
- <6>Lowering gbus maximum rate from 1032000000 to 984000000
- <6>Lowering cpu_g maximum rate from 3000000000 to 2499000000
- <6>tegra dvfs: VDD_CPU nominal 1260mV, scaling enabled
- <6>tegra dvfs: VDD_CORE nominal 1150mV, scaling enabled
- <6>tegra dvfs: VDD_GPU nominal 1200mV, scaling enabled
- <4>------------[ cut here ]------------
- <4>WARNING: at drivers/platform/tegra/../../../arch/arm/mach-tegra/clock.c:968 0xffffffc000b0a30c()
- <4>tegra: dsialp boot rate 408000000 exceeds max rate 156000000
- <4>CPU: 0 PID: 0 Comm: BFS Not tainted 3.10.75.[Fire-ICE]K.8.8 #1
- <4>Call trace:
- <4>[<ffffffc0000896c0>] 0xffffffc0000896c0
- <4>---[ end trace 1b75b31a2719ed1c ]---
- <6>tegra_powergate_init: DONE
- <3>Timed out waiting for pll_e lock bit ([0xec] = 0x4300)
- <6>PERCPU: Embedded 9 pages/cpu @ffffffc03ff4d000 s12544 r0 d24320 u36864
- <7>pcpu-alloc: s12544 r0 d24320 u36864 alloc=9*4096
- <7>pcpu-alloc: [0] 0 [0] 1
- <4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 481763
- <5>Kernel command line: tegra_wdt.enable_on_probe=1 tegra_wdt.heartbeat=120 androidboot.hardware=flounder MTS Version=33410787 memtype=0 tzram=4M@3962M ddr_die=1024M@2048M ddr_die=1024M@3072M section=128M lp0_vec=2048@0xf7fff000 tegra_fbmem=12713984@0xac001000 nvdumper_reserved=0xf7800000 core_edp_mv=1150 core_edp_ma=4000 gpt gpt_sector=69631 watchdog=disable nck=1048576@0xf7900000 androidboot.serialno=HT4ARJT06512 androidboot.baseband=N/A androidboot.mode=normal androidboot.bootloader=3.43.0.0114 swoff=0 androidboot.wifimacaddr=B4:CE:F6:07:D4:EE androidboot.wificountrycode=US androidboot.bootreason=reboot hw_revision=128 radioflag=0x0 androidboot.misc_pagesize=2048
- <6>PID hash table entries: 4096 (order: 3, 32768 bytes)
- <6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- <6>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- <5>Sorting __ex_table...
- <6>Memory: 1884MB 24MB = 1908MB total
- <5>Memory: 1751064k/1751064k available, 202728k reserved
- <5>Virtual kernel memory layout:
- <5> vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
- <5> vmemmap : 0xffffffbc01c00000 - 0xffffffbc0361d000 ( 26 MB)
- <5> modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
- <5> memory : 0xffffffc000000000 - 0xffffffc077600000 ( 1910 MB)
- <5> .init : 0xffffffc000ae5000 - 0xffffffc000b2e100 ( 293 kB)
- <5> .text : 0xffffffc000080000 - 0xffffffc000ae4024 ( 10641 kB)
- <5> .data : 0xffffffc000b2f000 - 0xffffffc000cd7570 ( 1698 kB)
- <6>SLUB: HWalign=64, Order=0-0, MinObjects=0, CPUs=2, Nodes=1
- <6>Preemptible hierarchical RCU implementation.
- <6> Dump stacks of tasks blocking RCU-preempt GP.
- <6>NR_IRQS:960
- <6>the number of interrupt controllers found is 5
- <6>Architected local timer running at 12.00MHz (virt).
- <6>sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
- <6>allocated 8388608 bytes of page_cgroup
- <6>please try 'cgroup_disable=memory' option if you don't want memory cgroups
- <6>Calibrating delay loop (skipped), value calculated using timer frequency.. lpj=120000
- <6>pid_max: default: 32768 minimum: 301
- <6>Mount-cache hash table entries: 256
- <6>Initializing cgroup subsys memory
- <6>Initializing cgroup subsys freezer
- <6>Initializing cgroup subsys bfqio
- <6>hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
- <6>Brought up 2 CPUs
- <6>SMP: Total of 2 processors activated.
- <4>LOCALITY CPU 0 to 1: 3
- <6>pinctrl core: initialized pinctrl subsystem
- <6>regulator-dummy: no parameters
- <6>NET: Registered protocol family 16
- <6>DMA: preallocated 256 KiB pool for atomic coherent allocations
- <6>console [pstore0] enabled
- <6>ramoops: attached 0x200000@0xf5c00000, ecc: 0/0
- <6>Registered FIQ tty driver
- <6>cpuidle: using governor menu
- <6>tegra_smmu tegra_smmu: Loaded Tegra IOMMU driver
- <6>flounder_camera_auxdata: update camera lookup table.
- <6>tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name default
- <6>gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio
- <6>htc_reboot_params f7700000.htc_reboot_params: got reboot_params buffer at ffffff8000022000
- <6>tegra124-pinctrl tegra124-pinctrl: lookup the user state drive not found
- <6>tegra124-pinctrl tegra124-pinctrl: lookup the user state unused not found
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0005 not supported on group cam_mclk_pcc0
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0005 not supported on group pbb0
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pk0
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group gpio_x1_aud_px1
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group gpio_x4_aud_px4
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group gpio_x5_aud_px5
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_row11_ps3
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_row12_ps4
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group sdmmc1_wp_n_pv3
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group ulpi_data7_po0
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_col3_pq3
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group gpio_x3_aud_px3
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pb1
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_row7_pr7
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_row9_ps1
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group sdmmc3_cmd_pa7
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_col0_pq0
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group sdmmc3_cd_n_pv2
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_col5_pq5
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pi3
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group gpio_w3_aud_pw3
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_row10_ps2
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_row11_ps3
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_col4_pq4
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group gpio_x6_aud_px6
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group gpio_x7_aud_px7
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group gpio_w2_aud_pw2
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pbb3
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pbb7
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pcc1
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pcc2
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group ph2
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group ph3
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group ph6
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group ph7
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group ph5
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group ph6
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group ph7
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pk1
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pj0
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pk3
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pi6
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pi5
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pc7
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pi0
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group clk2_req_pcc5
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_col1_pq1
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_col2_pq2
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_row0_pr0
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_row1_pr1
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_row2_pr2
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_row4_pr4
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_row5_pr5
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group clk3_req_pee1
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pu2
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pu3
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pu4
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pu5
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pu6
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group spdif_out_pk5
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pk2
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group sdmmc3_cd_n_pv2
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group ulpi_data0_po1
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group ulpi_data1_po2
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group ulpi_data2_po3
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group ulpi_data3_po4
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group ulpi_data4_po5
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group ulpi_data5_po6
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pbb5
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_col7_pq7
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_row8_ps0
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_row13_ps5
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group kb_row14_ps6
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pcc2
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pv0
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0003 not supported on group pv1
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0009 not supported on group drive_sdio1
- <3>tegra124-pinctrl tegra124-pinctrl: Config param 0009 not supported on group drive_sdio3
- <6>gpio pin = 130
- <6>gpio pin = 136
- <6>gpio pin = 68
- <6>gpio pin = 61
- <7>disp1 pclk=247600000
- <7>disp2 pclk=297000000
- <6>Selecting UARTA as the debug console
- <6>The debug console clock name is uarta
- <6>flounder_audio_init: gpio_free for gpio[2] I2S1_LRCK
- <6>flounder_audio_init: gpio_free for gpio[3] I2S1_SCLK
- <6>flounder_audio_init: gpio_free for gpio[4] I2S1_SDATA_IN
- <6>flounder_audio_init: gpio_free for gpio[5] I2S1_SDATA_OUT
- <6>flounder_audio_init: gpio_free for gpio[120] I2S2_LRCK
- <6>flounder_audio_init: gpio_free for gpio[121] I2S2_SDATA_IN
- <6>flounder_audio_init: gpio_free for gpio[122] I2S2_SDATA_OUT
- <6>flounder_audio_init: gpio_free for gpio[123] I2S2_SCLK
- <6>flounder_audio_init: gpio_free for gpio[180] extperiph1_clk
- <6>flounder_audio_init: gpio_free for gpio[192] SPI_MOSI
- <6>flounder_audio_init: gpio_free for gpio[193] SPI_MISO
- <6>flounder_audio_init: gpio_free for gpio[194] SPI_SCLK
- <6>flounder_audio_init: gpio_free for gpio[195] SPI_CS
- <6>flounder_audio_init: gpio_request for gpio[2] I2S1_LRCK
- <6>flounder_audio_init: gpio_request for gpio[3] I2S1_SCLK
- <3>PMC dt information non-NULL tegra_init_suspend
- <3>PMC DT attribute sysclkreq_high=0, board value=1
- <3>PMC DT attribute corereq_high=0, board value=1
- <3>PMC DT attribute cpu_off_timer=0, board value=300
- <3>PMC DT attribute cpu_timer=0, board value=500
- <3>PMC DT attribute suspend_mode=0, board value=3
- <6>Clear bootloader IO dpd settings
- <6>Loading EMC tables from DeviceTree.
- <6>tegra: emc: Derated table is valid.
- <6>tegra: pll_m is selected as scalable EMC clock source
- <6>Lowering emc maximum rate from 1200000000 to 924000000
- <6>tegra: validated EMC DFS table
- <6>flounder_edp_init: CPU regulator 16800 mA
- <6>flounder_edp_init: GPU regulator 16800 mA
- <6>BFS/0 isomgr_init(): iso emc max clk=924000KHz
- <6>BFS/0 isomgr_init(): max_iso_bw=7392000KB<6>flounder_touch_init init synaptics spi touch
- <6>[TP] synaptics device tree found
- <6>[HS]flounder_headset_init Headset device register enter
- <6>gpio pin = 130
- <6>gpio pin = 136
- <6>gpio pin = 68
- <6>gpio pin = 61
- <6>dma_declare_coherent_resizable_cma_memory:194: resizable heap=vpr, base=0x0x00000000ef800000, size=0x6400000
- <6> dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (4) rem_chunk_size(0x400000)<6>dma_declare_coherent_resizable_cma_memory:236: resizable cma heap=vpr create successful
- <6>platform tegradc.0: IOVA linear map 0x00000000f5e00000(1800000)
- <6>platform tegradc.0: IOVA linear map 0x00000000ac001000(c20000)
- <6>platform tegradc.0: IOVA linear map 0x00000000ef800000(6400000)
- <6>[GPS]flounder_gps_init init gps onoff
- <6>GPS: init gps hostwake
- <6>flounder_sar_init: GPIO pin:23
- <6>flounder_sar1_init: GPIO pin:229
- <6>tegra11_soctherem_oc_int_init(): OC interrupts enabled successful
- <4>------------[ cut here ]------------
- <4>WARNING: at arch/arm64/mach-tegra/../../arm/mach-tegra/board-flounder-sysedp.c:132 0xffffffc000aef36c()
- <4>CPU: 0 PID: 1 Comm: BFS/0 Tainted: G W 3.10.75.[Fire-ICE]K.8.8 #1
- <4>Call trace:
- <4>[<ffffffc0000896c0>] 0xffffffc0000896c0
- <4>---[ end trace 1b75b31a2719ed1d ]---
- <6>SET BD_ADDRESS=b4:ce:f6:b6:69:2c
- <6>vdso: 2 pages (1 code, 1 data) at base ffffffc000b35000
- <6>hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- <6>Denver: PMIC: type = TI TPS65913 2.3, voltage = 11, locked = 0
- <4>------------[ cut here ]------------
- <4>WARNING: at drivers/misc/qcom-mdm-9k/subsystem_restart.c:652 0xffffffc000b00974()
- <4>CPU: 0 PID: 1 Comm: BFS/0 Tainted: G W 3.10.75.[Fire-ICE]K.8.8 #1
- <4>Call trace:
- <4>[<ffffffc0000896c0>] 0xffffffc0000896c0
- <4>---[ end trace 1b75b31a2719ed1e ]---
- <6>mc-err: Started MC error interface!
- <6>bio: create slab <bio-0> at 0
- <4>tegra-pwm: probe of 7000a000.pwm failed with error -2
- <6>reg-fixed-voltage 0.regulator: Consumer c1 does not have device name
- <6>vdd_ac_bat: 5000 mV
- <6>vdd_hv_3v: 3000 mV
- <5>SCSI subsystem initialized
- <6>usbcore: registered new interface driver usbfs
- <6>usbcore: registered new interface driver hub
- <6>usbcore: registered new device driver usb
- <6>palmas 4-0058: Irq flag is 0x00000000
- <6>palmas 4-0058: Internal DesignRev 0x04, SWRev 0xD9
- <6>palmas 4-0058: ES version 2.3: ChipRevision 0xB3D9
- <6>gpiochip_add: registered GPIOs 1016 to 1023 on device: gpio.11
- <6>palmas-pinctrl pinmux.13: Muxing GPIO dfdc, PWM 0, LED 0
- <6>palmas-pmic pmic.18: Consumer c1 does not have device name
- <6>palmas-pmic pmic.18: Consumer c1 does not have device name
- <6>palmas-pmic pmic.18: Consumer c1 does not have device name
- <6>palmas-pmic pmic.18: Consumer c7 does not have device name
- <6>palmas-pmic pmic.18: Consumer c8 does not have device name
- <6>palmas-pmic pmic.18: Consumer c9 does not have device name
- <6>palmas-pmic pmic.18: Consumer c10 does not have device name
- <6>palmas-pmic pmic.18: Consumer c12 does not have device name
- <6>palmas-pmic pmic.18: Consumer c14 does not have device name
- <6>palmas-pmic pmic.18: Consumer c20 does not have device name
- <6>palmas-pmic pmic.18: Consumer c21 does not have device name
- <6>palmas-pmic pmic.18: Consumer c22 does not have device name
- <6>palmas-pmic pmic.18: Consumer c23 does not have device name
- <6>palmas-pmic pmic.18: Consumer c24 does not have device name
- <6>palmas-pmic pmic.18: Consumer c25 does not have device name
- <6>palmas-pmic pmic.18: Consumer c26 does not have device name
- <6>palmas-pmic pmic.18: Consumer c27 does not have device name
- <6>palmas-pmic pmic.18: Consumer c30 does not have device name
- <6>palmas-pmic pmic.18: Consumer c35 does not have device name
- <6>palmas-pmic pmic.18: Consumer c36 does not have device name
- <6>palmas-pmic pmic.18: Consumer c1 does not have device name
- <6>palmas-pmic pmic.18: Consumer c2 does not have device name
- <6>palmas-pmic pmic.18: Consumer c3 does not have device name
- <6>palmas-pmic pmic.18: Consumer c1 does not have device name
- <6>palmas-pmic pmic.18: Consumer c2 does not have device name
- <6>palmas-pmic pmic.18: Consumer c3 does not have device name
- <6>palmas-pmic pmic.18: Consumer c4 does not have device name
- <6>palmas-pmic pmic.18: Consumer c5 does not have device name
- <6>palmas-pmic pmic.18: Consumer c6 does not have device name
- <6>palmas-pmic pmic.18: Consumer c7 does not have device name
- <6>palmas-pmic pmic.18: Consumer c8 does not have device name
- <6>palmas-pmic pmic.18: Consumer c9 does not have device name
- <6>palmas-pmic pmic.18: Consumer c8 does not have device name
- <6>palmas-pmic pmic.18: Consumer c9 does not have device name
- <6>palmas-pmic pmic.18: Consumer c10 does not have device name
- <6>palmas-pmic pmic.18: Consumer c11 does not have device name
- <6>palmas-pmic pmic.18: Consumer c1 does not have device name
- <6>palmas-pmic pmic.18: Consumer c1 does not have device name
- <6>palmas-pmic pmic.18: Consumer c1 does not have device name
- <6>vdd-cpu: 650 <--> 1400 mV at 1020 mV with ramp delay 5000 uV/us
- <6>vdd-gpu: applied init 1000000uV constraint
- <6>vdd-gpu: 700 <--> 1400 mV at 1000 mV with ramp delay 5000 uV/us
- <6>vdd-core: 700 <--> 1400 mV at 1100 mV with ramp delay 5000 uV/us
- <6>vdd-1v8: 1800 mV with ramp delay 5000 uV/us
- <6>vdd-1v2: 1200 mV
- <6>vdd-out2-5v0: 5000 mV
- <6>vdd-hdmi: 5000 mV
- <6>avdd-pll: 1050 mV
- <6>vdd-aud: 1200 mV
- <6>vdd-aud: supplied by vdd-1v8
- <6>vdd-sensor-io: 1800 mV
- <6>vdd-sensor-2v85: 2850 mV
- <6>avdd-dsi-csi: 1200 mV
- <6>avdd-dsi-csi: supplied by vdd-1v8
- <6>vdd-1v5-ldo6: 1500 <--> 1800 mV at 1500 mV
- <6>v-slim-1v0: 1000 <--> 1100 mV at 2800 mV
- <6>v-slim-1v0: supplied by vdd-1v8
- <6>vdd-rtc: 950 mV
- <6>vdd-3p3-ldo9: 1800 <--> 3300 mV at 900 mV
- <6>vddio-hv: 3300 mV
- <6>vddio-hv: supplied by vdd-out2-5v0
- <6>avdd-usb: 3300 mV
- <6>REGEN1: at 4300 mV
- <6>REGEN2: at 4300 mV
- <6>REGEN3: at 4300 mV
- <6>SYSEN1: at 4300 mV
- <6>SYSEN2: at 4300 mV
- <6>Linux video capture interface: v2.00
- <6>data-charger: normal standby
- <6>htc_battery_bq2419x htc_battery_bq2419x.9: Registering battery charger driver
- <6>trusty trusty.4: trusty version: Build: 1518259, Built: 20:42:20 Oct 15 2014
- <6>WDT heartbeat enabled on probe
- <6>tegra_wdt 60005100.watchdog: tegra_wdt_probe done
- <6>Advanced Linux Sound Architecture Driver Initialized.
- <6>cfg80211: Calling CRDA to update world regulatory domain
- <6>nfc: nfc_init: NFC Core ver 0.1
- <6>NET: Registered protocol family 39
- <6>usb0-vbus: 5000 mV
- <6>usb1-vbus: 5000 mV
- <6>usb1-vbus: supplied by vdd-out2-5v0
- <6>usb2-vbus: 5000 mV
- <6>usb2-vbus: supplied by vdd-out2-5v0
- <6>reg-fixed-sync-voltage 4.regulator: Consumer c1 does not have device name
- <6>avdd-lcd: 3300 mV
- <6>avdd-lcd: supplied by vdd-1v2
- <6>reg-fixed-sync-voltage 5.regulator: Consumer c1 does not have device name
- <6>vdd-lcd: 1200 mV
- <6>vdd-lcd: supplied by vdd-1v8
- <6>ldoen: 1200 mV
- <6>ldoen: supplied by vdd-1v8
- <6>reg-fixed-sync-voltage 7.regulator: Consumer c1 does not have device name
- <6>vpp-fuse: 1800 mV
- <6>vpp-fuse: supplied by vdd-1v8
- <6>reg-fixed-sync-voltage 8.regulator: Consumer c1 does not have device name
- <6>en-lcd-bl: 5000 mV
- <6>bq2419x 0-006b: chip type BQ24190 detected
- <6>htc_battery_bq2419x htc_battery_bq2419x.9: Charging enable with reason 0x0 (origin:0x0)
- <6>bq2419x 0-006b: charger configure, enable=1 is_otg=0
- <6>data-vbus: normal standby
- <6>palmas-usb extcon.14: vbus-irq() INT3_LINE_STATE 0x00
- <6>palmas-usb extcon.14: Spurious disconnect event detected
- <3>tegra: failed to map regulator to power detect cell pwrdet_hv(-517)
- <3>tegra: failed regulators mapping - io power detection is left always on
- <6>Switching to clocksource arch_sys_counter
- <6>nvmap_heap_init: nvmap_heap_init: created heap block cache
- <6>nvmap_page_pool_init: Total MB RAM: 1826
- <6>nvmap_page_pool_init: nvmap page pool size: 58432 pages (228 MB)
- <6>nvmap_background_zero_thread: PP zeroing thread starting.
- <6>nvmap_page_pool_init: highmem=0, pool_size=58432,totalram=467462, freeram=438466, totalhigh=0, freehigh=0
- <6> iram: dma coherent mem declare 0x0000000040001000,258048
- <6>misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
- <6>misc nvmap: created heap vpr base 0x00000000ef800000 size (102400KiB)
- <6>nvmap:inner cache maint threshold=16777216
- <6>tegra-otg tegra-otg: otg transceiver registered
- <6>NET: Registered protocol family 2
- <6>TCP established hash table entries: 16384 (order: 6, 262144 bytes)
- <6>TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
- <6>TCP: Hash tables configured (established 16384 bind 16384)
- <6>TCP: reno registered
- <6>UDP hash table entries: 1024 (order: 4, 65536 bytes)
- <6>UDP-Lite hash table entries: 1024 (order: 4, 65536 bytes)
- <6>NET: Registered protocol family 1
- <7>PCI: CLS 0 bytes, default 64
- <6>tegra-fuse tegra-fuse: Fuse driver initialized succesfully
- <6>Unpacking initramfs...
- <6>Freeing initrd memory: 996K (ffffffc002a80000 - ffffffc002b79000)
- <6>host1x host1x: initialized
- <5>GPS: Init: Broadcom GPS HostWake Geofence Driver v1.01
- <5>GPS: misc register, name gps_geofence_wake, irq 278, host req pin num 69
- <6>Denver: backdoor interface is NOT available.
- <6>exFAT: Version 1.2.9
- <6>NTFS driver 2.1.30 [Flags: R/W].
- <6>fuse init (API version 7.22)
- <6>msgmni has been set to 3653
- <6>io scheduler noop registered
- <6>io scheduler deadline registered
- <6>io scheduler cfq registered
- <6>io scheduler bfq registered
- <6>BFQ I/O-scheduler version: v7r7
- <6>io scheduler fiops registered
- <6>io scheduler sio registered (default)
- <6>tsec tsec: initialized
- <6>isp isp.0: initialized
- <6>isp isp.1: initialized
- <6>falcon vic03.0: initialized
- <6>falcon msenc: initialized
- <6>tegradc tegradc.0: DSI: HS clock rate is 371500
- <6>tegradc tegradc.0: nominal-pclk:247600000 parent:371500000 div:1.5 pclk:247666666 245124000~269884000
- <6>tegradc tegradc.0: probed
- <6>tegradc tegradc.0: ADF initialized
- <6>tegradc tegradc.0: nominal-pclk:247600000 parent:371500000 div:1.5 pclk:247666666 245124000~269884000
- <6>tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels
- <6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- <6>serial-tegra.0: ttyTHS0 at MMIO 0x70006000 (irq = 68) is a SERIAL_TEGRA
- <6>serial-tegra.1: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA
- <6>serial-tegra.2: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA
- <6>serial-tegra.3: ttyTHS3 at MMIO 0x70006300 (irq = 122) is a SERIAL_TEGRA
- <6>[USB] usb_diag_open: name: diag
- <6>[USB] usb_diag_open: name: diag_mdm
- <6>[USB] usb_diag_open: name: diag_mdm2
- <6>[USB] usb_diag_open: name: diag_qsc
- <6>diagchar initialized now
- <6>loop: module loaded
- <6>zram: Created 1 device(s) ...
- <6>nct1008_nct72 0-004c: nct1008_probe: initialized
- <6>thermal thermal_zone0: Registering thermal zone thermal_zone0 for type Tboard_tegra
- <6>thermal thermal_zone1: Registering thermal zone thermal_zone1 for type Tdiode_tegra
- <4>nct1008_nct72 0-004d: Error [-517] in getting the regulator handle for vdd
- <4>nct1008_nct72: probe of 0-004d failed with error -5
- <4>bluedroid_pm_probe: regulator avdd not available
- <4>bluedroid_pm_probe: regulator dvdd not available
- <6>GPS: mt3332_gps_mod_init: platform_driver_register ret = 0
- <6>bcm2079x-i2c 0-0077: bcm2079x_probe, pro bcm2079x driver flags = 0
- <6>bcm2079x-i2c 0-0077: bcm2079x_probe, saving address 0x77
- <6>bcm2079x-i2c 0-0077: requesting IRQ 352 with IRQF_NO_SUSPEND
- <6>bcm2079x-i2c 0-0077: bcm2079x_probe, probing bcm2079x driver exited successfully
- <6>tun: Universal TUN/TAP device driver, 1.6
- <6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>PPP generic driver version 2.4.2
- <6>PPP BSD Compression module registered
- <6>PPP Deflate Compression module registered
- <6>PPP MPPE Compression module registered
- <6>NET: Registered protocol family 24
- <6>usbcore: registered new interface driver asix
- <6>usbcore: registered new interface driver ax88179_178a
- <6>usbcore: registered new interface driver cdc_ether
- <6>usbcore: registered new interface driver smsc95xx
- <6>usbcore: registered new interface driver cdc_subset
- <6>usbcore: registered new interface driver cdc_ncm
- <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>tegra USB phy - inst[1] platform info:
- <6>port_otg: no
- <6>has_hostpc: yes
- <6>phy_interface: USB_PHY_INTF_UTMI
- <6>op_mode: TEGRA_USB_OPMODE_HOST
- <6>qc2_voltage: 0
- <6>vbus_gpio: -1
- <6>hot_plug: disabled
- <6>remote_wakeup: enabled
- <6>[USB] utmi_phy_power_on UTMIP_XCVR_CFG0:6002a0b xcvr_use_fuses:1 utmi_xcvr_setup:b
- <6>tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
- <6>tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
- <6>tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000
- <6>tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.10
- <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>usb usb1: Product: Tegra EHCI Host Controller
- <6>usb usb1: Manufacturer: Linux 3.10.75.[Fire-ICE]K.8.8 ehci_hcd
- <6>usb usb1: SerialNumber: tegra-ehci.1
- <6>hub 1-0:1.0: USB hub found
- <6>hub 1-0:1.0: 1 port detected
- <6>tegra USB phy - inst[2] platform info:
- <6>port_otg: no
- <6>has_hostpc: yes
- <6>phy_interface: USB_PHY_INTF_UTMI
- <6>op_mode: TEGRA_USB_OPMODE_HOST
- <6>qc2_voltage: 0
- <6>vbus_gpio: -1
- <6>hot_plug: disabled
- <6>remote_wakeup: enabled
- <6>[USB] utmi_phy_power_on UTMIP_XCVR_CFG0:6002a0b xcvr_use_fuses:1 utmi_xcvr_setup:b
- <6>tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
- <6>tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2
- <6>tegra-ehci tegra-ehci.2: irq 129, io mem 0x7d008000
- <6>tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.10
- <6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- <6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>usb usb2: Product: Tegra EHCI Host Controller
- <6>usb usb2: Manufacturer: Linux 3.10.75.[Fire-ICE]K.8.8 ehci_hcd
- <6>usb usb2: SerialNumber: tegra-ehci.2
- <6>hub 2-0:1.0: USB hub found
- <6>hub 2-0:1.0: 1 port detected
- <6>ehci-pci: EHCI PCI platform driver
- <6>usbcore: registered new interface driver cdc_acm
- <6>cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>usbcore: registered new interface driver cdc_wdm
- <6>usbcore: registered new interface driver usb-storage
- <6>usbcore: registered new interface driver usbserial
- <6>usbcore: registered new interface driver bb_usb_chr
- <6>usbcore: registered new interface driver option
- <6>usbserial: USB Serial support registered for GSM modem (1-port)
- <6>usbcore: registered new interface driver pl2303
- <6>usbserial: USB Serial support registered for pl2303
- <6>usbcore: registered new interface driver modem_boot_hsic
- <6>usbcore: registered new interface driver nvshieldled
- <6>Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012)
- <6>tegra USB phy - inst[0] platform info:
- <6>port_otg: yes
- <6>has_hostpc: yes
- <6>phy_interface: USB_PHY_INTF_UTMI
- <6>op_mode: TEGRA_USB_OPMODE_DEVICE
- <6>qc2_voltage: 0
- <6>vbus_pmu_irq: 0
- <6>vbus_gpio: -1
- <6>charging: enabled
- <6>remote_wakeup: disabled
- <6>[USB] utmi_phy_power_on UTMIP_XCVR_CFG0:6002a38 xcvr_use_fuses:1 utmi_xcvr_setup:8
- <4>------------[ cut here ]------------
- <4>WARNING: at drivers/base/core.c:579 0xffffffc0004159ec()
- <4>Attribute set_current: read permission without 'show'
- <4>CPU: 1 PID: 1 Comm: BFS/0 Tainted: G W 3.10.75.[Fire-ICE]K.8.8 #1
- <4>Call trace:
- <4>[<ffffffc0000896c0>] 0xffffffc0000896c0
- <4>---[ end trace 1b75b31a2719ed1f ]---
- <6>usbcore: registered new interface driver xpad
- <6>usbcore: registered new interface driver usb_acecad
- <6>usbcore: registered new interface driver aiptek
- <6>usbcore: registered new interface driver gtco
- <6>usbcore: registered new interface driver hanwang
- <6>usbcore: registered new interface driver kbtab
- <6>usbcore: registered new interface driver wacom
- <6>synaptics_rmi4_spi_probe
- <6>parse_dt
- <6> parse_config
- <6> synaptics_rmi4_probe
- <6>input: synaptics_dsx as /devices/platform/spi-tegra114.2/spi_master/spi2/spi2.0/input/input0
- <4>------------[ cut here ]------------
- <4>WARNING: at kernel/irq/manage.c:432 0xffffffc0000fccd8()
- <4>Unbalanced enable for IRQ 291
- <4>CPU: 1 PID: 1 Comm: BFS/0 Tainted: G W 3.10.75.[Fire-ICE]K.8.8 #1
- <4>Call trace:
- <4>[<ffffffc0000896c0>] 0xffffffc0000896c0
- <4>---[ end trace 1b75b31a2719ed20 ]---
- <6>rmi4_fw_update_module_init
- <6>synaptics_dsx_spi spi2.0: synaptics_rmi4_fwu_init
- <6>synaptics_fw_updater
- <6>synaptics_dsx_spi spi2.0: fwu_start_reflash
- <5>fwu_start_reflash: Start of reflash process
- <6>[SAR0] cy8c_check_sensor
- <6>[SAR0] CY8C_SAR_V1f
- <6>[SAR] active=0
- <6>[SAR1] cy8c_check_sensor
- <4>tegra-i2c tegra12-i2c.1: no acknowledge from address 0x5d
- <4>tegra-i2c tegra12-i2c.1: no acknowledge from address 0x5d
- <4>tegra-i2c tegra12-i2c.1: no acknowledge from address 0x5d
- <4>tegra-i2c tegra12-i2c.1: no acknowledge from address 0x5d
- <4>tegra-i2c tegra12-i2c.1: no acknowledge from address 0x5d
- <6>[SAR1] Retrieve chip ID under BL
- <4>tegra-i2c tegra12-i2c.1: no acknowledge from address 0x61
- <4>tegra-i2c tegra12-i2c.1: no acknowledge from address 0x61
- <4>tegra-i2c tegra12-i2c.1: no acknowledge from address 0x61
- <4>tegra-i2c tegra12-i2c.1: no acknowledge from address 0x61
- <4>tegra-i2c tegra12-i2c.1: no acknowledge from address 0x61
- <3>[SAR1][ERR] Chip not found
- <4>CYPRESS_SAR: probe of 1-005d failed with error -1
- <6>[SAR] active=0
- <6>palmas-rtc rtc.12: rtc core: registered rtc.12 as rtc0
- <6>i2c /dev entries driver
- <6>[S_HUB][CW_MCU] CWMCU_i2c_probe++: Fix Oops for IIO when clear FIFO
- <6>[S_HUB][CW_MCU] mcu_parse_dt: acceleration axes = 6
- <6>[S_HUB][CW_MCU] mcu_parse_dt: Compass axes = 7
- <6>[S_HUB][CW_MCU] mcu_parse_dt: gyro axes = 6
- <6>input: CwMcuSensor as /devices/virtual/input/input1
- <6>[S_HUB][CW_MCU] CWMCU_i2c_probe success!
- <6>virtual_init
- <4>nvavp 60001000.nvavp: coherent DMA mask 0xffffffff is smaller than system GFP_DMA mask 0xffffffffffffffff
- <4>nvavp 60001000.nvavp: coherent DMA mask 0xffffffff is smaller than system GFP_DMA mask 0xffffffffffffffff
- <3>nvavp 60001000.nvavp: cannot allocate IOVA memory
- <6>nvavp 60001000.nvavp: allocated IOVA at ffffffffffffffff for AVP os
- <3>nvavp 60001000.nvavp: cannot get vde clock
- <4>nvavp: probe of 60001000.nvavp failed with error -2
- <6>nvavp nvavp: allocated IOVA at 8ff00000 for AVP os
- <6>ar0832_init: ++
- <4>i2c-core: driver [max77387] using legacy suspend method
- <4>i2c-core: driver [max77387] using legacy resume method
- <4>i2c-core: driver [as364x] using legacy suspend method
- <4>i2c-core: driver [as364x] using legacy resume method
- <6>[IMX135] sensor driver loading
- <6>[imx132] sensor driver loading
- <6>[ar0261] sensor driver loading
- <6>ov7695 sensor driver loading
- <6>mt9m114 sensor driver loading
- <6>[IMX219] sensor driver loading
- <6>ov9760 sensor driver loading
- <6>usbcore: registered new interface driver uvcvideo
- <6>USB Video Class driver (1.1.1)
- <6>gspca_main: v2.14.0 registered
- <3>cm3218 0-0048: Failed to get supply 'vdd': -517
- <6>cm3218 0-0048: idname:cm32181 func:cm3218_probe line:626 regulator not found.
- <6>Assuming regulator is not needed
- <6>cm3218 0-0048: idname:cm32181 func:cm3218_probe line:665 probe success
- <6>ashmem: initialized
- <6>thermal thermal_zone2: Registering thermal zone thermal_zone2 for type battery
- <6>device-mapper: uevent: version 1.0.3
- <6>device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- <6>sdhci: Secure Digital Host Controller Interface driver
- <6>sdhci: Copyright(c) Pierre Ossman
- <6>sdhci-pltfm: SDHCI platform and OF driver helper
- <6>sdhci-tegra sdhci-tegra.3: vddio_sd_slot regulator not found: -517. Assuming vddio_sd_slot is not required.
- <6>sdhci-tegra sdhci-tegra.3: Speedo value 2214
- <6>sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100
- <6>mmc0: no vqmmc regulator found
- <6>mmc0: no vmmc regulator found
- <6>mmc0: Invalid maximum block size, assuming 512 bytes
- <6>mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
- <6>sdhci-tegra sdhci-tegra.0: vddio_sd_slot regulator not found: -517. Assuming vddio_sd_slot is not required.
- <6>sdhci-tegra sdhci-tegra.0: Speedo value 2214
- <6>sdhci-tegra sdhci-tegra.0: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100
- <6>mmc1: no vqmmc regulator found
- <6>mmc1: no vmmc regulator found
- <6>mmc1: Invalid maximum block size, assuming 512 bytes
- <6>mmc1: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA
- <6>tegra-se tegra12-se: tegra_se_probe: complete
- <6>hidraw: raw HID events driver (C) Jiri Kosina
- <6>usbcore: registered new interface driver usbhid
- <6>usbhid: USB HID core driver
- <6>console [ttyFIQ0] enabled
- <6>Registered fiq debugger ttyFIQ0
- <6>tegra_throttle : init passed
- <6>Tegra cpuquiet initialized: disabled
- <6>thermal thermal_zone3: Registering thermal zone thermal_zone3 for type CPU-therm
- <6>thermal thermal_zone4: Registering thermal zone thermal_zone4 for type GPU-therm
- <6>thermal thermal_zone5: Registering thermal zone thermal_zone5 for type MEM-therm
- <6>thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PLL-therm
- <4>soctherm: Suspend feature CANNOT be enabled when any OC alarm is enabled
- <6>usbcore: registered new interface driver snd-usb-audio
- <6>[AUD] snd_soc_rt5677: tfa9895_init
- <6>[AUD] snd_soc_rt5677: tfa9895_probe: tfa9895 power pin is enabled
- <6>mmc0: BKOPS_EN bit is not set
- <6>[AUD] snd_soc_rt5677: tfa9895_probe:i2c read successfully
- <6>sdhci-tegra sdhci-tegra.3: Found T2T coeffs data
- <6>sdhci-tegra sdhci-tegra.3: 200MHz tap hole coeffs found
- <4>i2c-core: driver [tfa9895] using legacy suspend method
- <4>i2c-core: driver [tfa9895] using legacy resume method
- <6>[AUD] snd_soc_rt5677: tfa9895l_init
- <6>[AUD] snd_soc_rt5677: tfa9895l_probe:i2c read successfully
- <4>i2c-core: driver [tfa9895l] using legacy suspend method
- <4>i2c-core: driver [tfa9895l] using legacy resume method
- <6>rt5506_init
- <6>rt5506_probe
- <6>rt5506_parse_pfdata: dt is used
- <6>rt5506_parse_pfdata: gpio_rt5506_enable 185
- <6>rt5506_parse_pfdata: rt5506_power_enable 162
- <6>rt5506_power_enable=1
- <6>rt5506_probe: rt5506-enable=1
- <6>rt5506_probe:current gpio 185 value 1
- <6>rt5506_i2c_read_addr:i2c_read addr 0x1 value = 0xc7
- <6>rt5506_probe: rt5506 is connected
- <6>rt5506_probe: rt5506-enable=0
- <6>rt5506_probe: rt5506 is misc_registered
- <7>[HS_MGR] (headset_notifier_register) Register HS_INSERT notifier
- <7>[HS_MGR] (headset_notifier_update) HS_MGR driver is not ready
- <6>tegra_offload_platform probe successfull.
- <6>succefully registered offload opstegra30_avp_audio_platform_probe successful.
- <6>tegra_rt5677 power_on
- <3>Fail gpio_request gpio_ldo1_en, -16
- <6>Codec driver version 0.0.2 alsa 1.0.25
- <7>rt5677 1-002d: enter realtek_ce_init_hwdep
- <6>tegra-snd-rt5677 tegra-snd-rt5677.0: rt5677-aif1 <-> tegra30-i2s.1 mapping ok
- <6>tegra-snd-rt5677 tegra-snd-rt5677.0: dit-hifi <-> tegra30-i2s.2 mapping ok
- <6>tegra-snd-rt5677 tegra-snd-rt5677.0: dit-hifi <-> tegra30-i2s.3 mapping ok
- <6>tegra-snd-rt5677 tegra-snd-rt5677.0: dit-hifi <-> tegra30-i2s.2 mapping ok
- <6>tegra-snd-rt5677 tegra-snd-rt5677.0: snd-soc-dummy-dai <-> tegra-offload-pcm mapping ok
- <6>compress asoc: snd-soc-dummy-dai <-> tegra-offload-compr mapping ok
- <6>tegra-snd-rt5677 tegra-snd-rt5677.0: rt5677-aif1 <-> tegra30-i2s.1 mapping ok
- <6>tegra-snd-rt5677 tegra-snd-rt5677.0: dit-hifi <-> tegra30-i2s.2 mapping ok
- <6>tegra-snd-rt5677 tegra-snd-rt5677.0: snd-soc-dummy-dai <-> tegra-offload-pcm mapping ok
- <6>tegra-snd-rt5677 tegra-snd-rt5677.0: snd-soc-dummy-dai <-> tegra-fast-pcm mapping ok
- <6>tegra_rt5677_driver_probe to close MCLK
- <6>GACT probability NOT on
- <6>Mirror/redirect action on
- <6>u32 classifier
- <6> Actions configured
- <6>Netfilter messages via NETLINK v0.30.
- <6>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- <6>ctnetlink v0.93: registering with nfnetlink.
- <6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>xt_time: kernel timezone is -0000
- <6>**********Auto tuning windows*************
- <6>WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
- <6>win[0]: 0(0) - 51(1)
- <6>win[1]: 56(0) - 130(1)
- <6>win[2]: 135(0) - 208(1)
- <6>win[3]: 214(0) - 255(1)
- <6>***************************************
- <6>********tuning windows after inserting holes*****
- <6>WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
- <6>win[0]:-22(0) - 39(2)
- <6>win[1]:41(2) - 51(1)
- <6>win[2]:56(0) - 117(2)
- <6>ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>win[3]:119(2) - 130(1)
- <6>win[4]:135(0) - 195(2)
- <6>win[5]:197(2) - 208(1)
- <6>win[6]:214(0) - 255(1)
- <6>***********************************************
- <6>**********Tuning values*********
- <6>**estimated values**
- <6>T2T_Vmax 58, T2T_Vmin 81, 1'st_hole_Vmax 46, UI_Vmax 86
- <6>**Calculated values**
- <6>T2T_Vmax 64, 1'st_hole_Vmax 40, UI_Vmax 78
- <6>T2T_Vmin 64, 1'st_hole_Vmin 40, UI_Vmin 78
- <6>***********************************
- <6>***********final tuning windows**********
- <6>win[0]: -7 - 31
- <6>win[1]: 50 - 36
- <6>win[2]: 71 - 103
- <6>win[3]: 134 - 115
- <6>win[4]: 150 - 176
- <6>win[5]: 217 - 193
- <6>win[6]: 229 - 240
- <6>********************************
- <6>best tap win - (-7-31), best tap value 12
- <6>sdhci-tegra sdhci-tegra.3: sdhci_tegra_verify_best_tap: tuning freq 200000000hz, best tap 12
- <6>arp_tables: (C) 2002 David S. Miller
- <6>TCP: bic registered
- <6>TCP: cubic registered
- <6>TCP: westwood registered
- <6>TCP: highspeed registered
- <6>TCP: hybla registered
- <6>TCP: htcp registered
- <6>TCP: vegas registered
- <6>TCP: veno registered
- <6>TCP: scalable registered
- <6>TCP: lp registered
- <6>TCP: yeah registered
- <6>TCP: illinois registered
- <6>Initializing XFRM netlink socket
- <6>NET: Registered protocol family 10
- <6>mip6: Mobile IPv6
- <6>ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>mmc0: new HS200 MMC card at address 0001
- <6>sit: IPv6 over IPv4 tunneling driver
- <6>mmcblk0: mmc0:0001 BWBC3R 29.1 GiB
- <6>mmcblk0rpmb: mmc0:0001 BWBC3R partition 3 4.00 MiB
- <6>NET: Registered protocol family 17
- <6>NET: Registered protocol family 15
- <6>NET: Registered protocol family 35
- <6>NET: Registered protocol family 37
- <6>NET: Registered protocol family 41
- <4>Primary GPT is invalid, using alternate GPT.
- <6> mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33
- <5>Registering SWP/SWPB emulation handler
- <6>thermal thermal_zone7: Registering thermal zone thermal_zone7 for type therm_est
- <6>Denver: hardwood is NOT supported.
- <6>vi vi.0: vi_probe: ++
- <6>vi vi.0: initialized
- <6>vi vi.1: vi_probe: ++
- <6>vi vi.1: initialized
- <6>en-lcd-bl: incomplete constraints, leaving on
- <6>vpp-fuse: incomplete constraints, leaving on
- <6>ldoen: incomplete constraints, leaving on
- <6>vdd-lcd: incomplete constraints, leaving on
- <6>avdd-lcd: incomplete constraints, leaving on
- <6>usb0-vbus: incomplete constraints, leaving on
- <6>data-charger: incomplete constraints, leaving on
- <6>REGEN1: incomplete constraints, leaving on
- <6>vddio-hv: incomplete constraints, leaving on
- <6>vdd-hdmi: incomplete constraints, leaving on
- <6>vdd-gpu: incomplete constraints, leaving on
- <6>regulator-dummy: incomplete constraints, leaving on
- <7>[HS_MGR] (htc_headset_mgr_probe) ++++++++++++++++++++
- <6>input: h2w headset as /devices/virtual/input/input2
- <7>[HS_MGR] (hs_notify_driver_ready) HS_MGR ready
- <7>[HS_MGR] (htc_headset_mgr_probe) --------------------
- <7>[HS_PMIC] (htc_headset_pmic_probe) ++++++++++++++++++++
- <7>[HS_MGR] (hs_notify_key_irq) Failed to get remote key code
- <6>[HS_BOARD] (headset_get_debug) AUD_DEBUG_EN=0
- <7>[HS_PMIC] (debug_irq_handler) HEADSET_DEBUG_EN off
- <3>Warning: enabling a non-LP0 wake source 85
- <7>[HS_PMIC] (htc_headset_pmic_probe) htc_headset_pmic_probe: iio_channel_get(hs_channel)
- <7>
- <7>[HS_MGR] (headset_notifier_register) Register HPIN_GPIO notifier
- <7>[HS_MGR] (headset_notifier_register) Register REMOTE_ADC notifier
- <7>[HS_MGR] (headset_notifier_register) Register REMOTE_KEYCODE notifier
- <7>[HS_MGR] (headset_notifier_register) Register RPC_KEY notifier
- <7>[HS_MGR] (headset_notifier_register) Register MIC_STATUS notifier
- <7>[HS_MGR] (headset_notifier_register) Register KEY_INT_ENABLE notifier
- <7>[HS_MGR] (hs_notify_driver_ready) HS_PMIC ready
- <7>[HS_PMIC] (htc_headset_pmic_probe) --------------------
- <6>file system registered
- <6>android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>android_usb gadget: Number of LUNs=1
- <6> lun0: LUN: removable file: (no medium)
- <6>serial_function_init: init string: hsic:modem,tty,tty,tty:serial
- <6>gserial_init_port, port:0, transport:HSIC, type:2
- <6>gserial_init_port, port:1, transport:TTY, type:0
- <6>gserial_init_port, port:2, transport:TTY, type:0
- <6>gserial_init_port, port:3, transport:TTY, type:1
- <6>android_maxim14675_set_voltage: max_voltage (vbus) = 5000
- <6>android_usb gadget: android_usb ready
- <6>tegra-udc: bind to driver android_usb
- <6>input: gpio-keys.6 as /devices/platform/gpio-keys.6/input/input3
- <6>palmas-rtc rtc.12: setting system clock to 2015-04-23 14:26:06 UTC (1429799166)
- <6>power-supply-extcon power-supply-extcon: Extcon name tegra-udc
- <3>power-supply-extcon power-supply-extcon: Cable Y-cable registration failed: -22
- <6>power-supply-extcon power-supply-extcon: Unknown cable detected
- <6>power-supply-extcon power-supply-extcon: psy_extcon_probe() get success
- <6>last reset is due to software reset
- <6>
- <4>Disabling clocks left on by bootloader:
- <4> audio_2x
- <4> audio
- <4> audio4
- <4> audio3
- <4> audio2
- <4> audio1
- <4> audio0
- <4> clk72mhz
- <4> entropy
- <4> dsialp
- <4> dsi2-fixed
- <4> dsi1-fixed
- <4> uartd
- <4> mipi-cal-fixed
- <4> mipi-cal
- <4> trace
- <4> sdmmc4_ddr
- <4> pll_x_out0
- <4> pll_u_12M
- <4> pll_m_out1
- <6>tegra_dvfs: vdd_cpu connected to regulator
- <6>tegra_dvfs: vdd_core connected to regulator
- <6>tegra_dvfs: vdd_gpu connected to regulator
- <6>tegra_cl_dvfs tegra_cl_dvfs: DT data retrieved successfully
- <6>tegra_dvfs: registered vdd_cpu simon notifier
- <6>Tegra CPU DFLL is initialized with use_dfll = 2
- <6>CPU rate: 684 MHz
- <6>cpu_cold cooling device is registered
- <6>cpu_hot cooling device is registered
- <6>tegra dvfs: tegra sysfs cap interface is initialized
- <6>tegra dvfs: tegra sysfs gpu & emc interface is initialized
- <6>tegra dvfs: registered vdd_gpu simon notifier
- <6>tegra_actmon.emc: Completed initialization (0)
- <6>tegra_actmon.avp: Completed initialization (0)
- <6>tegra_mon.cpu_emc: Completed initialization (0)
- <4>dhd_module_init in
- <4>found wifi platform device bcm4329_wlan
- <4>Power-up adapter 'DHD generic adapter'
- <4>wifi_platform_set_power = 1
- <3>flounder_wifi_power: 1
- <6>sdhci-tegra sdhci-tegra.0: Found T2T coeffs data
- <6>sdhci-tegra sdhci-tegra.0: 204MHz tap hole coeffs found
- <6>**********Auto tuning windows*************
- <6>WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
- <6>win[0]: 0(0) - 69(1)
- <6>win[1]: 77(0) - 152(1)
- <6>win[2]: 161(0) - 236(1)
- <6>win[3]: 245(0) - 255(1)
- <6>***************************************
- <6>********tuning windows after inserting holes*****
- <6>WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
- <6>win[0]:-6(0) - 32(2)
- <6>win[1]:34(2) - 69(1)
- <6>win[2]:77(0) - 115(2)
- <6>win[3]:117(2) - 152(1)
- <6>win[4]:161(0) - 198(2)
- <6>win[5]:200(2) - 236(1)
- <6>win[6]:245(0) - 255(1)
- <6>***********************************************
- <6>**********Tuning values*********
- <6>**estimated values**
- <6>T2T_Vmax 60, T2T_Vmin 83, 1'st_hole_Vmax 32, UI_Vmax 81
- <6>**Calculated values**
- <6>T2T_Vmax 59, 1'st_hole_Vmax 33, UI_Vmax 83
- <6>T2T_Vmin 59, 1'st_hole_Vmin 33, UI_Vmin 83
- <6>***********************************
- <6>***********final tuning windows**********
- <6>win[0]: 10 - 24
- <6>win[1]: 43 - 53
- <6>win[2]: 93 - 101
- <6>win[3]: 132 - 136
- <6>win[4]: 177 - 179
- <6>win[5]: 220 - 220
- <6>win[6]: 255 - 239
- <6>********************************
- <6>best tap win - (10-24), best tap value 17
- <6>sdhci-tegra sdhci-tegra.0: sdhci_tegra_verify_best_tap: tuning freq 204000000hz, best tap 17
- <4>mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
- <6>mmc1: new ultra high speed SDR104 SDIO card at address 0001
- <4>wifi_platform_bus_enumerate device present 1
- <6>SDIO Vendor ID:02d0 and SDIO Device ID: 4354
- <4>F1 signature read @0x18000000=0x17214354
- <4>F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2
- <4>DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
- <4>wifi_platform_get_mac_addr
- <6>CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211
- <4>wl_create_event_handler(): thread:wl_event_handler:7c started
- <6>CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xffffffc066f019d0
- <4>dhd_attach(): thread:dhd_watchdog_thread:7d started
- <4>dhd_attach(): thread:dhd_dpc:7e started
- <4>dhd_attach(): thread:dhd_rxf:7f started
- <4>dhd_deferred_work_init: work queue initialized
- <6>[SAR] active=0
- <4>Dongle Host Driver, version 1.201.31 (r)
- <4>Compiled in drivers/net/wireless/bcmdhd on Apr 19 2015 at 13:20:09
- <4>Register interface [wlan0] MAC: b4:ce:f6:07:d4:ee
- <4>
- <4>dhd_prot_ioctl : bus is down. we have nothing to do
- <4>wifi_platform_set_power = 0
- <3>flounder_wifi_power: 0
- <6>ALSA device list:
- <6> #0: tegra-rt5677
- <6>Freeing unused kernel memory: 292K (ffffffc000ae5000 - ffffffc000b2e000)
- <6>BFS CPU scheduler by Con Kolivas.
- <11>init: could not import file 'init.flounder_svelte.rc' from '/init.flounder.rc'
- <11>init: /dev/hw_random not found
- <6>keychord: using input dev h2w headset for fevent
- <6>keychord: using input dev gpio-keys.6 for fevent
- <11>init: /dev/hw_random not found
- <6>EXT4-fs (mmcblk0p29): mounted filesystem without journal. Opts: (null)
- <14>fs_mgr: __mount(source=/dev/block/platform/sdhci-tegra.3/by-name/APP,target=/system,type=ext4)=0
- <6>EXT4-fs (mmcblk0p24): mounted filesystem without journal. Opts: (null)
- <14>fs_mgr: __mount(source=/dev/block/platform/sdhci-tegra.3/by-name/VNR,target=/vendor,type=ext4)=0
- <4>EXT4-fs (mmcblk0p30): Ignoring removed nomblk_io_submit option
- <6>EXT4-fs (mmcblk0p30): recovery complete
- <6>EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- <14>fs_mgr: check_fs(): mount(/dev/block/platform/sdhci-tegra.3/by-name/CAC,/cache,ext4)=0
- <14>fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/sdhci-tegra.3/by-name/CAC
- <6>synaptics_dsx_spi spi2.0: fwu_go_nogo: Device firmware ID = 1732172
- <6>synaptics_dsx_spi spi2.0: fwu_go_nogo: Image firmware ID = 1732172
- <6>synaptics_dsx_spi spi2.0: fwu_go_nogo: Device config ID = 0x33 0x32 0x30 0x13
- <6>synaptics_dsx_spi spi2.0: fwu_go_nogo: Image config ID = 0x33 0x32 0x30 0x13
- <6>synaptics_dsx_spi spi2.0: fwu_go_nogo: No need to do reflash
- <14>e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- <14>e2fsck: /dev/block/platform/sdhci-tegra.3/by-name/CAC: clean, 22/16384 files, 2106/65536 blocks
- <6>EXT4-fs (mmcblk0p30): barriers disabled
- <6>EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts: barrier=0
- <14>fs_mgr: __mount(source=/dev/block/platform/sdhci-tegra.3/by-name/CAC,target=/cache,type=ext4)=0
- <14>fs_mgr: Running /system/bin/fsck.f2fs -f /dev/block/platform/sdhci-tegra.3/by-name/UDA
- <6>[S_HUB][CW_MCU] check_fw_version: Sensor HUB firmware is up-to-date
- <14>fsck.f2fs: Info: Force to fix corruption
- <14>fsck.f2fs: Info: sector size = 512
- <14>fsck.f2fs: Info: total sectors = 53714944 (in 512bytes)
- <14>fsck.f2fs: Can't find a valid F2FS superblock at 0x0
- <14>fsck.f2fs: Can't find a valid F2FS superblock at 0x1
- <14>fsck.f2fs: fsck.f2fs terminated by exit(255)
- <6>[S_HUB][CW_MCU] Firmware Architecture version 1, Sense version 0, Cywee lib version 15, Water number 36, Active Engine 2, Project Mapping 1
- <6>F2FS-fs (mmcblk0p31): mounting..
- <6>F2FS-fs (mmcblk0p31): Magic Mismatch, valid(0xf2f52010) - read(0x19a000)
- <3>F2FS-fs (mmcblk0p31): Can't find a valid F2FS filesystem in 1th superblock
- <6>F2FS-fs (mmcblk0p31): Magic Mismatch, valid(0xf2f52010) - read(0x100000)
- <3>F2FS-fs (mmcblk0p31): Can't find a valid F2FS filesystem in 2th superblock
- <3>F2FS-fs (mmcblk0p31): mount failed
- <14>fs_mgr: __mount(source=/dev/block/platform/sdhci-tegra.3/by-name/UDA,target=/data,type=f2fs)=-1
- <4>EXT4-fs (mmcblk0p31): Ignoring removed nomblk_io_submit option
- <6>[S_HUB][CW_MCU] Sensor calibration matrix is (gs 1 gy 1 ls 1 bs 1)
- <6>htc_battery_bq2419x htc_battery_bq2419x.9: Battery id adc value is 287
- <6>[S_HUB][CW_MCU] cwmcu_irq_handler: MAGIC COVER = 0x0
- <6>[SAR0] update_firmware, 14594
- <6>[SAR] from FIRMWARE file = 1f, Chip FW ver: 1f
- <6>[SAR0] cy8c_check_sensor
- <6>[SAR0] CY8C_SAR_V1f
- <6>[SAR] active=0
- <5>fwu_start_reflash: End of reflash process
- <6>synaptics_dsx_spi spi2.0: synaptics_config_updater
- <6>synaptics_dsx_spi spi2.0: synaptics_config_updater: Device config ID = 0x33 0x32 0x30 0x13
- <5>synaptics_config_updater: Start of write config process
- <6>synaptics_dsx_spi spi2.0: fwu_get_tw_vendor: tw_vendor_pin = 5
- <6>synaptics_dsx_spi spi2.0: synaptics_config_updater: Image config ID = 0x33 0x32 0x30 0x13
- <6>synaptics_dsx_spi spi2.0: synaptics_config_updater: crc_cksum = 790FAB4A
- <6>synaptics_dsx_spi spi2.0: crc_comparison: config_crc = 790FAB4A, flash_crc = 790FAB4A
- <6>synaptics_dsx_spi spi2.0: synaptics_config_updater: No need to update
- <5>synaptics_config_updater: End of write config process
- <6>synaptics_dsx_spi spi2.0: synaptics_config_updater end
- <7>EXT4-fs (mmcblk0p31): ext4_orphan_cleanup: deleting unreferenced inode 467279
- <7>EXT4-fs (mmcblk0p31): ext4_orphan_cleanup: deleting unreferenced inode 483548
- <6>EXT4-fs (mmcblk0p31): 2 orphan inodes deleted
- <6>EXT4-fs (mmcblk0p31): recovery complete
- <6>EXT4-fs (mmcblk0p31): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- <14>fs_mgr: check_fs(): mount(/dev/block/platform/sdhci-tegra.3/by-name/UDA,/data,ext4)=0
- <14>fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/sdhci-tegra.3/by-name/UDA
- <14>e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- <14>e2fsck: /dev/block/platform/sdhci-tegra.3/by-name/UDA: clean, 44209/1679360 files, 5901275/6714368 blocks
- <4>EXT4-fs (mmcblk0p31): Ignoring removed nomblk_io_submit option
- <6>EXT4-fs (mmcblk0p31): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=continue
- <14>fs_mgr: __mount(source=/dev/block/platform/sdhci-tegra.3/by-name/UDA,target=/data,type=ext4)=0
- <11>fs_mgr: mount_with_alternatives(): Mounted /dev/block/platform/sdhci-tegra.3/by-name/UDA on /data with fs_type=ext4 instead of f2fs
- <6>zram0: detected capacity change from 0 to 533413888
- <6>Adding 520908k swap on /dev/block/zram0. Priority:-1 extents:1 across:520908k SS
- <3>EXT4-fs (mmcblk0p31): Unrecognized mount option "seclabel" or missing value
- <6>binder: 152:152 transaction failed 29189, size 0-0
- <3>android_usb: already disabled
- <6>read descriptors
- <6>read strings
- <6>mtp_bind_config
- <38>logd.auditd: start
- <6>OPEN_CLIENT_SESSION_COMPAT: 0x5f902ace 0x4cd85e5c 0xb88754ae 0xafdd228c
- <6>warning: `daemonsu' uses 32-bit capabilities (legacy support in use)
- <11>init: untracked pid 192 exited with status 0
- <4>EXT4-fs (mmcblk0p29): warning: mounting unchecked fs, running e2fsck is recommended
- <6>EXT4-fs (mmcblk0p29): re-mounted. Opts: (null)
- <6>EXT4-fs (mmcblk0p29): re-mounted. Opts: (null)
- <6>EXT4-fs (mmcblk0p29): re-mounted. Opts: (null)
- <11>init: untracked pid 255 exited with status 0
- <6>tegra_simon_gpu_grading_cb: graded gpu: v = 800, t = 45000, grade = 1
- <6>tegra_dvfs: set vdd_gpu simon grade 1
- <12>healthd: BatteryHealthPath not found
- <4>EXT4-fs (mmcblk0p29): warning: mounting unchecked fs, running e2fsck is recommended
- <11>init: untracked pid 455 exited with status 1
- <6>EXT4-fs (mmcblk0p29): re-mounted. Opts: (null)
- <6>EXT4-fs (mmcblk0p29): re-mounted. Opts: (null)
- <6>EXT4-fs (mmcblk0p29): re-mounted. Opts: (null)
- <6>EXT4-fs (mmcblk0p29): re-mounted. Opts: (null)
- <11>init: untracked pid 457 exited with status 1
- <6>synaptics_dsx_spi spi2.0: synaptics_rmi4_force_cal
- <5>pcl-generic pcl-generic: layout empty.
- <6>pcl-generic pcl-generic: virtual_device_add
- <6>pcl-generic pcl-generic: virtual_device_add
- <6>pcl-generic pcl-generic: virtual_device_add
- <6>pcl-generic pcl-generic: virtual_device_add
- <6>[IMX219]: probing sensor.
- <6>drv201: probing focuser.
- <3>drv201 2-000e: drv201_regulator_get avdd_cam1_cam ERR: -517
- <3>drv201 2-000e: drv201_regulator_get pwrdet_sdmmc3 ERR: -517
- <6>ov9760: probing sensor.
- <4>tegra-i2c tegra12-i2c.2: no acknowledge from address 0xe
- <3>drv201 2-000e: drv201_set_arc_mode: CONTROL reg write failed
- <3>drv201 2-000e: drv201_param_rd CAPS
- <3>tps61310 0-0033: tps61310_param_rd unsupported parameter: 49
- <6>imx219_get_af_data
- <4>[0] x1 [1] x63 [2] x2 [3] x15
- <6>imx219_get_sensor_id
- <6>chip unique id 0x0 = 0x3b
- <6>chip unique id 0x1 = 0x25
- <6>chip unique id 0x2 = 0x10
- <6>chip unique id 0x3 = 0x10
- <6>chip unique id 0x4 = 0x05
- <6>chip unique id 0x5 = 0x5b
- <3>nvmap_pgprot: PID 162: mediaserver: WARNING: NVMAP_HANDLE_WRITE_COMBINE should be used in place of NVMAP_HANDLE_UNCACHEABLE on ARM64
- <6>ov9760 2-0036: ov9760_get_sensor_id
- <6>ov9760 2-0036: ov9760_get_sensor_id 3d00 = 60
- <6>ov9760 2-0036: ov9760_get_sensor_id 3d01 = 32
- <6>ov9760 2-0036: ov9760_get_sensor_id 3d02 = ea
- <6>ov9760 2-0036: ov9760_get_sensor_id 3d03 = 21
- <6>ov9760 2-0036: ov9760_get_sensor_id 3d04 = 88
- <6>ov9760 2-0036: ov9760_get_sensor_id 3d05 = 44
- <6>ov9760 2-0036: ov9760_get_sensor_id 3d06 = fc
- <6>ov9760 2-0036: ov9760_get_sensor_id 3d07 = 84
- <7>[HS_PMIC] (irq_init_work_func) Enable detect IRQ
- <7>[HS_PMIC] (irq_init_work_func) Setup button IRQ type
- <7>[HS_PMIC] (irq_init_work_func) Enable debug IRQ
- <6>pdata->gpio_free_count[0]=0, 1st time enter, don't need free gpio
- <6>set_rt5506_hp_en: 0
- <6>set_rt5506_amp: 1
- <6>set_rt5506_amp: enable gpio 185
- <6>volume_ramp_func
- <6>volume_ramp_func:Not in STATUS_PLAYBACK
- <6>set_amp: 1
- <6>set_amp: ON
- <6>set_rt5506_amp: 0
- <6>set_amp: 0
- <6>set_amp: OFF
- <6>hs_imp_gpio_off: disable gpio 185
- <6>pdata->gpio_free_count[1]=0, 1st time enter, don't need free gpio
- <6>tegra_rt5677_spk_startup:mi2s amp on
- <6>[AUD] snd_soc_rt5677: tfa9895_ioctl: TFA9895_ENABLE_DSP 0
- <6>[AUD] snd_soc_rt5677: tfa9895_ioctl: TFA9895_ENABLE_DSP 1
- <6>[AUD] snd_soc_rt5677: tfa9895l_ioctl: TFA9895_ENABLE_DSP 0
- <6>[AUD] snd_soc_rt5677: tfa9895l_ioctl: TFA9895_ENABLE_DSP 1
- <6>tegra_rt5677_spk_shutdown:mi2s amp off
- <6>[SAR] active=1
- <6>[SAR] active=0
- <6>[SAR] active=1
- <6>[SAR] active=0
- <6>[SAR] active=1
- <6>[SAR] active=0
- <12>healthd: battery l=94 v=4194 t=32.9 h=2 st=3 c=-778 chg=
- <6>lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
- <6>lowmemorykiller: oom_adj 0 => oom_score_adj 0
- <6>lowmemorykiller: oom_adj 1 => oom_score_adj 58
- <6>lowmemorykiller: oom_adj 2 => oom_score_adj 117
- <6>lowmemorykiller: oom_adj 3 => oom_score_adj 176
- <6>lowmemorykiller: oom_adj 9 => oom_score_adj 529
- <6>lowmemorykiller: oom_adj 15 => oom_score_adj 1000
- <6>tegra_simon_cpu_grading_cb: graded cpu: v = 820, t = 56500, grade = 1
- <6>tegra_dvfs: set vdd_cpu simon grade 1
- <7>rt5677 1-002d: rt_codec_hwdep_open()
- <3>drv201 2-000e: drv201_param_rd CAPS
- <3>tps61310 0-0033: tps61310_param_rd unsupported parameter: 49
- <6>imx219_get_af_data
- <6>imx219_get_sensor_id
- <6>ov9760 2-0036: ov9760_get_sensor_id
- <6>acc_open
- <6>acc_release
- <4>
- <4>Dongle Host Driver, version 1.201.31 (r)
- <4>Compiled in drivers/net/wireless/bcmdhd on Apr 19 2015 at 13:20:09
- <4>wl_android_wifi_on in
- <4>wifi_platform_set_power = 1
- <3>flounder_wifi_power: 1
- <6>[USB] utmi_phy_power_on UTMIP_XCVR_CFG0:6002a0b xcvr_use_fuses:1 utmi_xcvr_setup:b
- <6>[USB] utmi_phy_power_on UTMIP_XCVR_CFG0:6002a0b xcvr_use_fuses:1 utmi_xcvr_setup:b
- <4>sdio_reset_comm():
- <6>sdhci-tegra sdhci-tegra.0: sdhci_tegra_verify_best_tap: tuning freq 204000000hz, best tap 17
- <6>SDIO Vendor ID:02d0 and SDIO Device ID: 4354
- <4>F1 signature read @0x18000000=0x17214354
- <4>F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2
- <4>DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
- <4>dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
- <6>SDIO Vendor ID:02d0 and SDIO Device ID: 4354
- <4>dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
- <4>wifi_platform_get_mac_addr
- <4>Firmware up: op_mode=0x0005, MAC=b4:ce:f6:07:d4:ee
- <4>dhd_preinit_ioctls lpc fail WL_DOWN : 0, lpc = 1
- <4>dhd_preinit_ioctls Set lpc ret --> 0
- <4>Firmware version = wl0: Oct 4 2014 08:36:51 version 7.35.79.34 (r506388) FWID 01-bbae652c
- <4>dhd_wlfc_init(): successfully enabled bdcv2 tlv signaling, 79
- <4>dhd_wlfc_init: query wlfc_mode succeed, fw_caps=0x1c
- <4>dhd_wlfc_init(): wlfc_mode=0x1c, ret=0
- <6>nvavp nvavp: using SMMU at 8ff00000 to load AVP kernel
- <6>nvavp nvavp: read firmware from 'nvavp_os_8ff00000.bin' (15900 bytes)
- <6>nvavp nvavp: entry=00000094 control=00004bf0 debug=000053f0 size=15876
- <6>nvavp nvavp: AVP os at vaddr=ffffff8003001000 paddr=8ff00000 reset_addr=8ff00094
- <6>nvavp nvavp: read ucode firmware from 'nvavp_vid_ucode_alt.bin' (39916 bytes)
- <6>CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : P2P interface registered
- <4>WLC_E_IF: NO_IF set, event Ignored
- <6>binder: undelivered transaction 7009
- <4>dhd_set_suspend: Remove extra suspend setting
- <6>bcm2079x-i2c 0-0077: device node major=10, minor=58
- <6>bcm2079x-i2c 0-0077: bcm2079x_dev_unlocked_ioctl, BCMNFC_WAKE_CTL (fa05, 0):
- <6>bcm2079x-i2c 0-0077: bcm2079x_dev_unlocked_ioctl, BCMNFC_POWER_CTL (fa01, 0):
- <6>bcm2079x-i2c 0-0077: bcm2079x_dev_unlocked_ioctl, BCMNFC_POWER_CTL (fa01, 1):
- <6>bcm2079x-i2c 0-0077: set_client_addr changed to (0x0077) flag = 0000
- <6>CFG80211-ERROR) wl_cfg80211_connect : Connectting withff:ff:ff:ff:ff:ff channel (0) ssid "TPADSA", len (6)
- <6>
- <4>wl_bss_connect_done succeeded with 00:24:01:cd:72:95
- <4>wl_bss_connect_done succeeded with 00:24:01:cd:72:95
- <6>bcm2079x-i2c 0-0077: bcm2079x_dev_unlocked_ioctl, BCMNFC_WAKE_CTL (fa05, 0):
- <6>bcm2079x-i2c 0-0077: bcm2079x_dev_unlocked_ioctl, BCMNFC_WAKE_CTL (fa05, 0):
- <6>bcm2079x-i2c 0-0077: bcm2079x_dev_unlocked_ioctl, BCMNFC_WAKE_CTL (fa05, 1):
- <6>bcm2079x-i2c 0-0077: bcm2079x_dev_unlocked_ioctl, BCMNFC_POWER_CTL (fa01, 0):
- <3>nvmap_pgprot: PID 1394: mod.eleven:main: WARNING: NVMAP_HANDLE_WRITE_COMBINE should be used in place of NVMAP_HANDLE_UNCACHEABLE on ARM64
- <3>qtaguid: iface_stat: stat_update() wlan0 not found
- <4>dhd_set_suspend: Remove extra suspend setting
- <4>dhd_set_suspend: force extra Suspend setting
- <4>dhd_get_suspend_bcn_li_dtim beacon=100 bcn_li_dtim=3 DTIM=1 Listen=10
- <3>tegradc tegradc.0: DSI controller suspended
- <3>tegradc tegradc.0: DSI controller suspended
- <4>dhd_set_suspend: force extra Suspend setting
- <4>dhd_get_suspend_bcn_li_dtim beacon=100 bcn_li_dtim=3 DTIM=1 Listen=10
- <6>[SAR] active=1
- <6>[SAR] active=0
- <6>synaptics_dsx_spi spi2.0: synaptics_rmi4_force_cal
- <6>tegradc tegradc.0: nominal-pclk:6666000 parent:9937500 div:1.5 pclk:6625000 6599340~7265940
- <6>tegradc tegradc.0: DSI pad calibration done
- <6>tegradc tegradc.0: DSI pad calibration done
- <4>dhd_set_suspend: Remove extra suspend setting
- <6>[SAR] active=1
- <6>[SAR] active=0
- <4>sh (3882): /proc/3854/oom_adj is deprecated, please use /proc/3854/oom_score_adj instead.
- <6>[SAR] active=1
- <6>binder: 480:1079 transaction failed 29189, size 124-0
- <6>binder: 480:1114 transaction failed 29189, size 124-0
- <6>binder: 480:1482 transaction failed 29189, size 124-0
- <6>binder: 480:1676 transaction failed 29189, size 124-0
- <11>init: untracked pid 3880 exited with status 250
- <6>CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3
- <6>cfg80211: Calling CRDA to update world regulatory domain
- <6>CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK
- <4>link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 00:24:01:cd:72:95
- <6>[SAR] active=0
- <11>init: untracked pid 3854 exited with status 0
- <6>[SAR] active=1
- <11>init: untracked pid 3886 exited with status 0
- <6>[SAR] active=0
- <6>[SAR] active=1
- <6>[SAR] active=0
- <6>[SAR] active=1
- <6>[SAR] active=0
- <6>[SAR] active=1
- <6>[SAR] active=0
- <6>[SAR] active=1
- <6>[SAR] active=0
- <6>[SAR] active=1
- <6>[SAR] active=0
- <6>[SAR] active=1
- <6>[SAR] active=0
- <6>[SAR] active=1
- <12>healthd: battery l=93 v=4190 t=34.2 h=2 st=3 c=-855 chg=
- <11>init: untracked pid 4808 exited with status 0
- <11>init: untracked pid 4873 exited with status 65
- <11>init: untracked pid 4876 exited with status 0
- root@flounder:/ #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement