Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ======== Wireless-Info START ========
- System-Info ~~~~~~~~~~~~~~~~~~~~~~~~
- OpalMint 3.2.0-4-amd64 x86_64, Debian GNU/Linux 7.8 (wheezy), wheezy
- CPU : Intel(R) Core(TM) i3-4005U CPU @ 1.70GHz
- Memory : 3908 MB
- Uptime : 09:34:39 up 10 min, 1 user, load average: 0.00, 0.01, 0.01
- lspci ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- 01:00.0 Network controller [0280]: Atheros Communications Inc. AR9462 Wireless Network Adapter [168c:0034] (rev 01)
- Subsystem: Foxconn International, Inc. Device [105b:e058]
- Kernel driver in use: ath9k
- lsusb ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
- Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Bus 001 Device 002: ID 1bcf:2c67 Sunplus Innovation Technology Inc.
- Bus 001 Device 003: ID 0489:e056 Foxconn / Hon Hai
- Bus 001 Device 004: ID 13fe:4100 Kingston Technology Company Inc.
- Bus 003 Device 002: ID 8087:8000 Intel Corp.
- PCMCIA Card Info ~~~~~~~~~~~~~~~~~~~
- iwconfig ~~~~~~~~~~~~~~~~~~~~~~~~~~~
- wlan0 IEEE 802.11abgn ESSID:off/any
- Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
- Retry long limit:7 RTS thr:off Fragment thr:off
- Encryption key:off
- Power Management:off
- rfkill ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- lsmod ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- ath9k 64619 0
- ath9k_common 12728 1 ath9k
- ath9k_hw 322112 2 ath9k_common,ath9k
- ath 21370 3 ath9k_hw,ath9k_common,ath9k
- mac80211 192806 1 ath9k
- cfg80211 137243 3 mac80211,ath,ath9k
- module parameters ~~~~~~~~~~~~~~~~~~
- ath9k (4): blink=0 | btcoex_enable=0 | nohwcrypt=1 | ps_enable=0
- ath9k_hw (1): force_new_ani=0
- cfg80211 (2): cfg80211_disable_40mhz_24ghz=N | ieee80211_regdom=00
- mac80211 (4): ieee80211_default_rc_algo=minstrel_ht | max_nullfunc_tries=2 | max_probe_tries=5 | probe_wait_ms=500
- nm-tool ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- ================o======o========o========o=========o===========o==============o===========
- Interface & ID | Type | Driver | State | Default | Speed | Support | HW Addr
- ================o======o========o========o=========o===========o==============o===========
- | | | | | | |
- ----------------+------+--------+--------+---------+-----------+--------------+-----------
- NetworkManager.state ~~~~~~~~~~~~~~~
- NetworkManager.conf ~~~~~~~~~~~~~~~~
- NM WiFi Profiles ~~~~~~~~~~~~~~~~~~~
- interfaces ~~~~~~~~~~~~~~~~~~~~~~~~~
- # This file describes the network interfaces available on your system
- # and how to activate them. For more information, see interfaces(5).
- # The loopback network interface
- auto lo
- iface lo inet loopback
- resolv.conf ~~~~~~~~~~~~~~~~~~~~~~~~
- nameserver 8.8.8.8
- nameserver 8.8.4.4
- Routes & Ping ~~~~~~~~~~~~~~~~~~~~~~
- Kernel IP routing table
- Destination Gateway Genmask Flags Metric Ref Use Iface
- iw reg get ~~~~~~~~~~~~~~~~~~~~~~~~~
- (Region : "en_US.UTF-8")
- iwlist chan ~~~~~~~~~~~~~~~~~~~~~~~~
- wlan0 32 channels in total; available frequencies :
- Channel 01 (2.412 GHz) - 13 (2.472 GHz)
- Channel 36 (5.18 GHz)
- Channel 40 (5.2 GHz)
- Channel 44 (5.22 GHz)
- Channel 48 (5.24 GHz)
- Channel 52 (5.26 GHz)
- Channel 56 (5.28 GHz)
- Channel 60 (5.3 GHz)
- Channel 64 (5.32 GHz)
- Channel 100 (5.5 GHz)
- Channel 104 (5.52 GHz)
- Channel 108 (5.54 GHz)
- Channel 112 (5.56 GHz)
- Channel 116 (5.58 GHz)
- Channel 120 (5.6 GHz)
- Channel 124 (5.62 GHz)
- Channel 128 (5.64 GHz)
- Channel 132 (5.66 GHz)
- Channel 136 (5.68 GHz)
- Channel 140 (5.7 GHz) - 13 (2.472 GHz)
- iwlist scan ~~~~~~~~~~~~~~~~~~~~~~~~
- blacklist ~~~~~~~~~~~~~~~~~~~~~~~~~~
- modinfo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- [ath9k]
- filename: /lib/modules/3.2.0-4-amd64/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko
- depends: ath9k_hw,ath9k_common,mac80211,ath,cfg80211
- parm: debug:Debugging mask (uint)
- parm: nohwcrypt:Disable hardware encryption (int)
- parm: blink:Enable LED blink on activity (int)
- parm: btcoex_enable:Enable wifi-BT coexistence (int)
- parm: ps_enable:Enable WLAN PowerSave (int)
- [ath9k_common]
- filename: /lib/modules/3.2.0-4-amd64/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko
- depends: ath,ath9k_hw
- [ath9k_hw]
- filename: /lib/modules/3.2.0-4-amd64/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
- depends: ath
- parm: force_new_ani:Force new ANI for AR5008, AR9001, AR9002 (int)
- [ath]
- filename: /lib/modules/3.2.0-4-amd64/kernel/drivers/net/wireless/ath/ath.ko
- depends: cfg80211
- [mac80211]
- filename: /lib/modules/3.2.0-4-amd64/kernel/net/mac80211/mac80211.ko
- depends: cfg80211
- parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
- parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
- parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
- parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
- [cfg80211]
- filename: /lib/modules/3.2.0-4-amd64/kernel/net/wireless/cfg80211.ko
- depends: rfkill
- parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
- parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
- udev rules ~~~~~~~~~~~~~~~~~~~~~~~~~
- # PCI device 0x168c:/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0 (ath9k)
- SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC wlan0>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
- Custom files/entries ~~~~~~~~~~~~~~~
- /etc/modules : Not Default
- /etc/rc.local : Default
- /etc/modprobe.d : Not Default
- /etc/pm/(cnf|pw|sl) : Default
- [/etc/modules]
- loop
- [/etc/modprobe.d]
- ath9k.conf : options ath9k nohwcrypt=1
- Kernel boot line ~~~~~~~~~~~~~~~~~~~
- BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/OpalMint-root ro quiet
- dmesg ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- [ 0.001775] Initializing cgroup subsys net_cls
- [ 0.834014] audit: initializing netlink socket (disabled)
- [ 1.050857] Initializing network drop monitor service
- [ 2.206206] Bluetooth: Atheros AR30xx firmware driver ver 1.0
- [ 2.219222] ath9k 0000:01:00.0: setting latency timer to 64
- [ 2.229452] ath: EEPROM regdomain: 0x6c
- [ 2.229455] ath: EEPROM indicates we should expect a direct regpair map
- [ 2.229459] ath: Country alpha2 being used: 00
- [ 2.229461] ath: Regpair used: 0x6c
- [ 2.248327] usb 1-4: firmware: agent aborted loading ar3k/AthrBT_0x11020000.dfu (not found?)
- [ 2.252007] Registered led device: ath9k-phy0
- [ 65.406105] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- ======== Done ========
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement