Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [user@server ~]# smartctl -a /dev/sda
- smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-431.5.1.el6.x86_64] (local build)
- Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Device Model: SAMSUNG HD103UI
- Serial Number: -
- LU WWN Device Id: 5 0000f0 03b234510
- Firmware Version: 1AA01113
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Sector Size: 512 bytes logical/physical
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: 8
- ATA Standard is: ATA-8-ACS revision 3b
- Local Time is: Mon Mar 24 12:31:24 2014 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (16181) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 271) minutes.
- Conveyance self-test routine
- recommended polling time: ( 28) minutes.
- SCT capabilities: (0x003f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
- 3 Spin_Up_Time 0x0007 073 073 011 Pre-fail Always - 8870
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 73
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 10522
- 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 13311
- 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
- 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 73
- 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 060 050 000 Old_age Always - 40 (Min/Max 37/40)
- 194 Temperature_Celsius 0x0022 060 050 000 Old_age Always - 40 (Min/Max 37/41)
- 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 69366
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
- 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 12629 -
- # 2 Short offline Completed without error 00% 10765 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- [user@server ~]# smartctl -a /dev/sdb
- smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-431.5.1.el6.x86_64] (local build)
- Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Hitachi Deskstar 7K1000.C
- Device Model: Hitachi HDS721010CLA332
- Serial Number: -
- LU WWN Device Id: 5 000cca 35dd986c8
- Firmware Version: JP4OA39C
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: ATA-8-ACS revision 4
- Local Time is: Mon Mar 24 12:31:28 2014 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (10399) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 173) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 097 097 016 Pre-fail Always - 393216
- 2 Throughput_Performance 0x0005 133 133 054 Pre-fail Offline - 104
- 3 Spin_Up_Time 0x0007 121 121 024 Pre-fail Always - 312 (Average 311)
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 63
- 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 81
- 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 132 132 020 Pre-fail Offline - 34
- 9 Power_On_Hours 0x0012 096 096 000 Old_age Always - 28197
- 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 63
- 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1765
- 193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1765
- 194 Temperature_Celsius 0x0002 136 136 000 Old_age Always - 44 (Min/Max 20/68)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 87
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- ATA Error Count: 226 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 226 occurred at disk power-on lifetime: 27681 hours (1153 days + 9 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 6c 5f 20 7c 00 Error: UNC at LBA = 0x007c205f = 8134751
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 80 28 cb 21 7c 40 08 30d+12:47:38.902 READ FPDMA QUEUED
- 60 80 20 4b 21 7c 40 08 30d+12:47:38.902 READ FPDMA QUEUED
- 60 80 18 cb 20 7c 40 08 30d+12:47:38.900 READ FPDMA QUEUED
- 60 80 10 4b 20 7c 40 08 30d+12:47:38.900 READ FPDMA QUEUED
- 60 80 08 cb 22 7c 40 08 30d+12:47:38.900 READ FPDMA QUEUED
- Error 225 occurred at disk power-on lifetime: 27681 hours (1153 days + 9 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 6c 5f 20 7c 00 Error: UNC at LBA = 0x007c205f = 8134751
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 80 f0 4b aa 7c 40 08 30d+12:47:18.824 READ FPDMA QUEUED
- 60 80 e8 cb aa 7c 40 08 30d+12:47:18.824 READ FPDMA QUEUED
- 60 80 e0 4b ab 7c 40 08 30d+12:47:18.824 READ FPDMA QUEUED
- 60 80 d8 cb ab 7c 40 08 30d+12:47:18.823 READ FPDMA QUEUED
- 60 80 d0 4b ac 7c 40 08 30d+12:47:18.823 READ FPDMA QUEUED
- Error 224 occurred at disk power-on lifetime: 27681 hours (1153 days + 9 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 6c 5f 20 7c 00 Error: UNC at LBA = 0x007c205f = 8134751
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 80 e8 cb b2 7c 40 08 30d+12:46:59.108 READ FPDMA QUEUED
- 60 80 e0 4b b2 7c 40 08 30d+12:46:59.107 READ FPDMA QUEUED
- 60 80 d8 cb b1 7c 40 08 30d+12:46:59.100 READ FPDMA QUEUED
- 60 80 80 4b b1 7c 40 08 30d+12:46:59.095 READ FPDMA QUEUED
- 60 80 78 cb b0 7c 40 08 30d+12:46:59.092 READ FPDMA QUEUED
- Error 223 occurred at disk power-on lifetime: 27681 hours (1153 days + 9 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 6c 5f 20 7c 00 Error: UNC at LBA = 0x007c205f = 8134751
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 80 48 cb a9 7c 40 08 30d+12:46:39.142 READ FPDMA QUEUED
- 60 80 50 4b a9 7c 40 08 30d+12:46:35.273 READ FPDMA QUEUED
- 60 80 58 cb a8 7c 40 08 30d+12:46:35.272 READ FPDMA QUEUED
- 60 80 60 4b a8 7c 40 08 30d+12:46:35.269 READ FPDMA QUEUED
- 60 80 68 cb a7 7c 40 08 30d+12:46:35.265 READ FPDMA QUEUED
- Error 222 occurred at disk power-on lifetime: 27681 hours (1153 days + 9 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 6c 5f 20 7c 00 Error: UNC at LBA = 0x007c205f = 8134751
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 80 a8 cb 2e 7c 40 08 30d+12:46:12.396 READ FPDMA QUEUED
- 60 80 a0 4b 2e 7c 40 08 30d+12:46:12.395 READ FPDMA QUEUED
- 60 80 98 cb 2d 7c 40 08 30d+12:46:12.390 READ FPDMA QUEUED
- 60 80 90 4b 2d 7c 40 08 30d+12:46:12.390 READ FPDMA QUEUED
- 60 80 88 cb 2c 7c 40 08 30d+12:46:12.384 READ FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 14471 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- [user@server ~]#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement