Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.37.2-escobar2 (root@escobar2) (gcc version 4.4.4 (Gentoo 4.4.4-r2 p1.3, pie-0.4.5) ) #1 SMP Sat Feb 26 17:15:32 Local time zone must be set--see zic
- [ 0.000000] Command line: root=/dev/sda3 i915.modeset=1 acpi_osi=
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
- [ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000b327c000 (usable)
- [ 0.000000] BIOS-e820: 00000000b327c000 - 00000000b3282000 (reserved)
- [ 0.000000] BIOS-e820: 00000000b3282000 - 00000000b33e4000 (usable)
- [ 0.000000] BIOS-e820: 00000000b33e4000 - 00000000b340f000 (reserved)
- [ 0.000000] BIOS-e820: 00000000b340f000 - 00000000b346f000 (usable)
- [ 0.000000] BIOS-e820: 00000000b346f000 - 00000000b3470000 (reserved)
- [ 0.000000] BIOS-e820: 00000000b3470000 - 00000000b34f1000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000b34f1000 - 00000000b370f000 (reserved)
- [ 0.000000] BIOS-e820: 00000000b370f000 - 00000000b3717000 (usable)
- [ 0.000000] BIOS-e820: 00000000b3717000 - 00000000b371f000 (reserved)
- [ 0.000000] BIOS-e820: 00000000b371f000 - 00000000b377e000 (usable)
- [ 0.000000] BIOS-e820: 00000000b377e000 - 00000000b379f000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000b379f000 - 00000000b37de000 (usable)
- [ 0.000000] BIOS-e820: 00000000b37de000 - 00000000b37ff000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000b37ff000 - 00000000b3800000 (usable)
- [ 0.000000] BIOS-e820: 00000000b3800000 - 00000000c0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000f080a000 - 00000000f080b000 (reserved)
- [ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI present.
- [ 0.000000] DMI: eMachines eMachines D730/HM42_CP, BIOS V1.28 11/02/2010
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] No AGP bridge found
- [ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-D3FFF write-protect
- [ 0.000000] D4000-DBFFF uncachable
- [ 0.000000] DC000-FFFFF write-through
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 disabled
- [ 0.000000] 1 base 000000000 mask F80000000 write-back
- [ 0.000000] 2 base 080000000 mask FC0000000 write-back
- [ 0.000000] 3 base 100000000 mask FC0000000 write-back
- [ 0.000000] 4 base 138000000 mask FF8000000 uncachable
- [ 0.000000] 5 base 0B4000000 mask FFC000000 uncachable
- [ 0.000000] 6 base 0B8000000 mask FF8000000 uncachable
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820 update range: 00000000b4000000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0xb3800 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [ffff8800000f6b30] f6b30
- [ 0.000000] Scanning 0 areas for low memory corruption
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000b3800000
- [ 0.000000] 0000000000 - 00b3800000 page 2M
- [ 0.000000] kernel direct mapping tables up to b3800000 @ 1fffc000-20000000
- [ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
- [ 0.000000] 0100000000 - 0138000000 page 2M
- [ 0.000000] kernel direct mapping tables up to 138000000 @ b37d8000-b37de000
- [ 0.000000] ACPI: RSDP 00000000000f6510 00024 (v02 PTLTD )
- [ 0.000000] ACPI: XSDT 00000000b37f0723 00064 (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
- [ 0.000000] ACPI: FACP 00000000b37e0000 000F4 (v03 INTEL CALPELLA 06040000 PTEC 00000001)
- [ 0.000000] ACPI: DSDT 00000000b37e1000 0E3E0 (v02 Intel CALPELLA 06040000 INTL 20060912)
- [ 0.000000] ACPI: FACS 00000000b379afc0 00040
- [ 0.000000] ACPI: HPET 00000000b37fed07 00038 (v01 INTEL CALPELLA 06040000 PTEC 00000001)
- [ 0.000000] ACPI: MCFG 00000000b37fed3f 0003C (v01 INTEL CALPELLA 06040000 PTEC 00000001)
- [ 0.000000] ACPI: SLIC 00000000b37fed7b 00176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
- [ 0.000000] ACPI: APIC 00000000b37feef1 00084 (v01 PTLTD ? APIC 06040000 LTP 00000000)
- [ 0.000000] ACPI: BOOT 00000000b37fef75 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
- [ 0.000000] ACPI: ASF! 00000000b37fef9d 00063 (v32 OEMID OEMTBL 06040000 PTL 00000001)
- [ 0.000000] ACPI: SSDT 00000000b37df000 009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at 0000000000000000-0000000138000000
- [ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000
- [ 0.000000] NODE_DATA [0000000137ffb000 - 0000000137ffffff]
- [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880134200000-ffff8801379fffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal 0x00100000 -> 0x00138000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[9] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009c
- [ 0.000000] 0: 0x00000100 -> 0x000b327c
- [ 0.000000] 0: 0x000b3282 -> 0x000b33e4
- [ 0.000000] 0: 0x000b340f -> 0x000b346f
- [ 0.000000] 0: 0x000b370f -> 0x000b3717
- [ 0.000000] 0: 0x000b371f -> 0x000b377e
- [ 0.000000] 0: 0x000b379f -> 0x000b37de
- [ 0.000000] 0: 0x000b37ff -> 0x000b3800
- [ 0.000000] 0: 0x00100000 -> 0x00138000
- [ 0.000000] On node 0 totalpages: 963697
- [ 0.000000] DMA zone: 56 pages used for memmap
- [ 0.000000] DMA zone: 6 pages reserved
- [ 0.000000] DMA zone: 3918 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 14280 pages used for memmap
- [ 0.000000] DMA32 zone: 716061 pages, LIFO batch:31
- [ 0.000000] Normal zone: 3136 pages used for memmap
- [ 0.000000] Normal zone: 226240 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
- [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
- [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
- [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 00000000b327c000 - 00000000b3282000
- [ 0.000000] PM: Registered nosave memory: 00000000b33e4000 - 00000000b340f000
- [ 0.000000] PM: Registered nosave memory: 00000000b346f000 - 00000000b3470000
- [ 0.000000] PM: Registered nosave memory: 00000000b3470000 - 00000000b34f1000
- [ 0.000000] PM: Registered nosave memory: 00000000b34f1000 - 00000000b370f000
- [ 0.000000] PM: Registered nosave memory: 00000000b3717000 - 00000000b371f000
- [ 0.000000] PM: Registered nosave memory: 00000000b377e000 - 00000000b379f000
- [ 0.000000] PM: Registered nosave memory: 00000000b37de000 - 00000000b37ff000
- [ 0.000000] PM: Registered nosave memory: 00000000b3800000 - 00000000c0000000
- [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
- [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
- [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f080a000
- [ 0.000000] PM: Registered nosave memory: 00000000f080a000 - 00000000f080b000
- [ 0.000000] PM: Registered nosave memory: 00000000f080b000 - 00000000feaff000
- [ 0.000000] PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000
- [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000
- [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
- [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
- [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
- [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
- [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
- [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
- [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
- [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
- [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
- [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8800b3000000 s76480 r8192 d21824 u524288
- [ 0.000000] pcpu-alloc: s76480 r8192 d21824 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 946219
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: root=/dev/sda3 i915.modeset=1 acpi_osi=
- [ 0.000000] ACPI: _OSI method disabled
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 3715664k/5111808k available (7546k kernel code, 1257020k absent, 139124k reserved, 5775k data, 604k init)
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU-based detection of stalled CPUs is disabled.
- [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.001000] Detected 2394.016 MHz processor.
- [ 0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.03 BogoMIPS (lpj=2394016)
- [ 0.000240] pid_max: default: 32768 minimum: 301
- [ 0.000366] Security Framework initialized
- [ 0.000478] SELinux: Initializing.
- [ 0.000591] SELinux: Starting in permissive mode
- [ 0.000904] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.002077] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.002593] Mount-cache hash table entries: 256
- [ 0.002832] Initializing cgroup subsys ns
- [ 0.002945] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
- [ 0.003144] Initializing cgroup subsys cpuacct
- [ 0.003257] Initializing cgroup subsys freezer
- [ 0.003389] CPU: Physical Processor ID: 0
- [ 0.003498] CPU: Processor Core ID: 0
- [ 0.003610] mce: CPU supports 9 MCE banks
- [ 0.003728] CPU0: Thermal monitoring enabled (TM1)
- [ 0.003846] using mwait in idle threads.
- [ 0.003954] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
- [ 0.004242] ... version: 3
- [ 0.004350] ... bit width: 48
- [ 0.004459] ... generic registers: 4
- [ 0.004567] ... value mask: 0000ffffffffffff
- [ 0.004678] ... max period: 000000007fffffff
- [ 0.004791] ... fixed-purpose events: 3
- [ 0.004899] ... event mask: 000000070000000f
- [ 0.005086] ACPI: Core revision 20101013
- [ 0.033091] Setting APIC routing to flat
- [ 0.033536] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.043648] CPU0: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz stepping 05
- [ 0.144939] Booting Node 0, Processors #1 #2 #3 Ok.
- [ 0.417346] Brought up 4 CPUs
- [ 0.417470] Total of 4 processors activated (19151.27 BogoMIPS).
- [ 0.418872] kworker/u:0 used greatest stack depth: 5936 bytes left
- [ 0.419246] regulator: core version 0.5
- [ 0.419466] regulator: dummy:
- [ 0.422113] Time: 1:35:55 Date: 03/02/11
- [ 0.422273] NET: Registered protocol family 16
- [ 0.422728] ACPI: bus type pci registered
- [ 0.422955] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.423177] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.471186] PCI: Using configuration type 1 for base access
- [ 0.479027] bio: create slab <bio-0> at 0
- [ 0.480703] ACPI: EC: Look up EC in DSDT
- [ 0.490444] ACPI: SSDT 00000000b371a918 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
- [ 0.491054] ACPI: Dynamic OEM Table Load:
- [ 0.491242] ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
- [ 0.491918] ACPI: SSDT 00000000b3718018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
- [ 0.492508] ACPI: Dynamic OEM Table Load:
- [ 0.492694] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
- [ 0.498670] ACPI: SSDT 00000000b3719a98 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
- [ 0.499338] ACPI: Dynamic OEM Table Load:
- [ 0.499523] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
- [ 0.502365] ACPI: SSDT 00000000b3717d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
- [ 0.502981] ACPI: Dynamic OEM Table Load:
- [ 0.503171] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
- [ 0.527107] ACPI: Interpreter enabled
- [ 0.527231] ACPI: (supports S0 S3 S4 S5)
- [ 0.527504] ACPI: Using IOAPIC for interrupt routing
- [ 0.544645] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
- [ 0.545049] ACPI: No dock devices found.
- [ 0.545178] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.546178] \_SB_.PCI0:_OSC invalid UUID
- [ 0.546180] _OSC request data:1 8 1f
- [ 0.546184] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
- [ 0.547676] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
- [ 0.547810] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
- [ 0.547942] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 0.548159] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
- [ 0.548373] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
- [ 0.548587] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfeafffff]
- [ 0.548809] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
- [ 0.548827] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
- [ 0.549056] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
- [ 0.549067] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
- [ 0.549073] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.549078] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
- [ 0.549127] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
- [ 0.549155] pci 0000:00:16.0: reg 10: [mem 0xf0804000-0xf080400f 64bit]
- [ 0.549227] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.549232] pci 0000:00:16.0: PME# disabled
- [ 0.549260] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
- [ 0.549279] pci 0000:00:1a.0: reg 10: [mem 0xf0806000-0xf08063ff]
- [ 0.549344] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.549348] pci 0000:00:1a.0: PME# disabled
- [ 0.549368] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
- [ 0.549382] pci 0000:00:1b.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit]
- [ 0.549429] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.549433] pci 0000:00:1b.0: PME# disabled
- [ 0.549448] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
- [ 0.549496] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.549499] pci 0000:00:1c.0: PME# disabled
- [ 0.549515] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
- [ 0.549563] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.549566] pci 0000:00:1c.1: PME# disabled
- [ 0.549593] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
- [ 0.549612] pci 0000:00:1d.0: reg 10: [mem 0xf0807000-0xf08073ff]
- [ 0.549677] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.549681] pci 0000:00:1d.0: PME# disabled
- [ 0.549699] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
- [ 0.549749] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
- [ 0.549852] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
- [ 0.549868] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
- [ 0.549875] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
- [ 0.549883] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
- [ 0.549890] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
- [ 0.549897] pci 0000:00:1f.2: reg 20: [io 0x1820-0x183f]
- [ 0.549904] pci 0000:00:1f.2: reg 24: [mem 0xf0808000-0xf08087ff]
- [ 0.549933] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.549936] pci 0000:00:1f.2: PME# disabled
- [ 0.549950] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
- [ 0.549963] pci 0000:00:1f.3: reg 10: [mem 0xf0809000-0xf08090ff 64bit]
- [ 0.549982] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]
- [ 0.550012] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
- [ 0.550033] pci 0000:00:1f.6: reg 10: [mem 0xf080a000-0xf080afff 64bit]
- [ 0.550178] pci 0000:02:00.0: [14e4:1692] type 0 class 0x000200
- [ 0.550200] pci 0000:02:00.0: reg 10: [mem 0xf0400000-0xf040ffff 64bit]
- [ 0.550289] pci 0000:02:00.0: PME# supported from D3hot D3cold
- [ 0.550294] pci 0000:02:00.0: PME# disabled
- [ 0.552185] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
- [ 0.552316] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
- [ 0.552319] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf04fffff]
- [ 0.552324] pci 0000:00:1c.0: bridge window [mem 0xf0a00000-0xf0bfffff 64bit pref]
- [ 0.552375] pci 0000:04:00.0: [168c:002e] type 0 class 0x000280
- [ 0.552396] pci 0000:04:00.0: reg 10: [mem 0xf0500000-0xf050ffff 64bit]
- [ 0.552475] pci 0000:04:00.0: supports D1
- [ 0.552477] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
- [ 0.552481] pci 0000:04:00.0: PME# disabled
- [ 0.554151] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
- [ 0.554280] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
- [ 0.554283] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
- [ 0.554288] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.554342] pci 0000:00:1e.0: PCI bridge to [bus 0f-0f] (subtractive decode)
- [ 0.554478] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
- [ 0.554482] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- [ 0.554487] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.554490] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.554492] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.554494] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.554496] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
- [ 0.554498] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
- [ 0.554501] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
- [ 0.554515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.554745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.554898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
- [ 0.554972] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
- [ 0.555136] \_SB_.PCI0:_OSC invalid UUID
- [ 0.555137] _OSC request data:1 1f 1f
- [ 0.560252] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
- [ 0.560500] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
- [ 0.560519] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
- [ 0.560538] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
- [ 0.560554] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
- [ 0.560570] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
- [ 0.560586] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
- [ 0.561015] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
- [ 0.561699] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
- [ 0.562382] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
- [ 0.562943] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
- [ 0.563509] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 0.564220] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 0.564926] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
- [ 0.565491] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
- [ 0.566113] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.566331] vgaarb: loaded
- [ 0.566589] SCSI subsystem initialized
- [ 0.566807] libata version 3.00 loaded.
- [ 0.566967] usbcore: registered new interface driver usbfs
- [ 0.567134] usbcore: registered new interface driver hub
- [ 0.567296] usbcore: registered new device driver usb
- [ 0.568417] wmi: Skipping duplicate GUID 05901221-D566-11D1-B2F0-00A0C9062910
- [ 0.568601] wmi: Skipping duplicate GUID 05901221-D566-11D1-B2F0-00A0C9062910
- [ 0.568904] wmi: Mapper loaded
- [ 0.569063] Advanced Linux Sound Architecture Driver Version 1.0.23.
- [ 0.569196] PCI: Using ACPI for IRQ routing
- [ 0.569322] PCI: pci_cache_line_size set to 64 bytes
- [ 0.569407] reserve RAM buffer: 000000000009c400 - 000000000009ffff
- [ 0.569409] reserve RAM buffer: 00000000b327c000 - 00000000b3ffffff
- [ 0.569413] reserve RAM buffer: 00000000b33e4000 - 00000000b3ffffff
- [ 0.569417] reserve RAM buffer: 00000000b346f000 - 00000000b3ffffff
- [ 0.569421] reserve RAM buffer: 00000000b3717000 - 00000000b3ffffff
- [ 0.569423] reserve RAM buffer: 00000000b377e000 - 00000000b3ffffff
- [ 0.569426] reserve RAM buffer: 00000000b37de000 - 00000000b3ffffff
- [ 0.569428] reserve RAM buffer: 00000000b3800000 - 00000000b3ffffff
- [ 0.569655] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.569963] NetLabel: Initializing
- [ 0.570084] NetLabel: domain hash size = 128
- [ 0.570211] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.570346] NetLabel: unlabeled traffic allowed by default
- [ 0.570544] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.570952] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.573100] Switching to clocksource tsc
- [ 0.580118] pnp: PnP ACPI init
- [ 0.580253] ACPI: bus type pnp registered
- [ 0.581102] pnp 00:00: [bus 00-fe]
- [ 0.581105] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.581107] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.581108] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.581111] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.581112] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
- [ 0.581114] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
- [ 0.581116] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
- [ 0.581118] pnp 00:00: [mem 0x000cc000-0x000cffff window]
- [ 0.581120] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
- [ 0.581122] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
- [ 0.581123] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
- [ 0.581125] pnp 00:00: [mem 0x000dc000-0x000dffff window]
- [ 0.581127] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
- [ 0.581129] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
- [ 0.581131] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
- [ 0.581132] pnp 00:00: [mem 0x000ec000-0x000effff window]
- [ 0.581134] pnp 00:00: [mem 0x000f0000-0x000fffff window]
- [ 0.581136] pnp 00:00: [mem 0xc0000000-0xfeafffff window]
- [ 0.581138] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
- [ 0.581263] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 0.581300] pnp 00:01: [io 0x0000-0x001f]
- [ 0.581302] pnp 00:01: [io 0x0081-0x0091]
- [ 0.581304] pnp 00:01: [io 0x0093-0x009f]
- [ 0.581305] pnp 00:01: [io 0x00c0-0x00df]
- [ 0.581307] pnp 00:01: [dma 4]
- [ 0.581357] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.581367] pnp 00:02: [mem 0xff000000-0xffffffff]
- [ 0.581413] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
- [ 0.581522] pnp 00:03: [irq 0 disabled]
- [ 0.581533] pnp 00:03: [irq 8]
- [ 0.581535] pnp 00:03: [mem 0xfed00000-0xfed003ff]
- [ 0.581586] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.581599] pnp 00:04: [io 0x00f0]
- [ 0.581604] pnp 00:04: [irq 13]
- [ 0.581651] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.581663] pnp 00:05: [io 0x002e-0x002f]
- [ 0.581665] pnp 00:05: [io 0x004e-0x004f]
- [ 0.581669] pnp 00:05: [io 0x0061]
- [ 0.581670] pnp 00:05: [io 0x0063]
- [ 0.581672] pnp 00:05: [io 0x0065]
- [ 0.581673] pnp 00:05: [io 0x0067]
- [ 0.581675] pnp 00:05: [io 0x0070]
- [ 0.581676] pnp 00:05: [io 0x0080]
- [ 0.581677] pnp 00:05: [io 0x0092]
- [ 0.581679] pnp 00:05: [io 0x00b2-0x00b3]
- [ 0.581681] pnp 00:05: [io 0x0068-0x006f]
- [ 0.581682] pnp 00:05: [io 0x0500-0x050f]
- [ 0.581684] pnp 00:05: [io 0xffff]
- [ 0.581685] pnp 00:05: [io 0xffff]
- [ 0.581687] pnp 00:05: [io 0x0400-0x047f]
- [ 0.581689] pnp 00:05: [io 0x1180-0x11ff]
- [ 0.581690] pnp 00:05: [io 0xfe00]
- [ 0.581768] pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.581802] pnp 00:06: [io 0x0070-0x0077]
- [ 0.581805] pnp 00:06: [irq 8]
- [ 0.581854] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.581910] pnp 00:07: [io 0x0060]
- [ 0.581912] pnp 00:07: [io 0x0064]
- [ 0.581917] pnp 00:07: [irq 1]
- [ 0.581971] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.581988] pnp 00:08: [irq 12]
- [ 0.582039] pnp 00:08: Plug and Play ACPI device, IDs SYN0302 SYN0300 SYN0002 PNP0f13 (active)
- [ 0.582500] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
- [ 0.582502] pnp 00:09: [mem 0xfed10000-0xfed13fff]
- [ 0.582504] pnp 00:09: [mem 0xfed18000-0xfed18fff]
- [ 0.582506] pnp 00:09: [mem 0xfed19000-0xfed19fff]
- [ 0.582507] pnp 00:09: [mem 0xe0000000-0xefffffff]
- [ 0.582509] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 0.582511] pnp 00:09: [mem 0xfeaff000-0xfeafffff]
- [ 0.582513] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
- [ 0.582515] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
- [ 0.582517] pnp 00:09: [mem 0xfed40000-0xfed44fff]
- [ 0.582518] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
- [ 0.582520] pnp 00:09: [mem 0xff000000-0xffffffff]
- [ 0.582522] pnp 00:09: [mem 0xfee00000-0xfeefffff]
- [ 0.582610] pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.582807] pnp 00:0a: [bus ff]
- [ 0.582880] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
- [ 0.582901] pnp: PnP ACPI: found 11 devices
- [ 0.583026] ACPI: ACPI bus type pnp unregistered
- [ 0.583161] system 00:05: [io 0x0500-0x050f] has been reserved
- [ 0.583293] system 00:05: [io 0xffff] has been reserved
- [ 0.583420] system 00:05: [io 0xffff] has been reserved
- [ 0.583547] system 00:05: [io 0x0400-0x047f] has been reserved
- [ 0.583677] system 00:05: [io 0x1180-0x11ff] has been reserved
- [ 0.583808] system 00:05: [io 0xfe00] has been reserved
- [ 0.583939] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.584076] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
- [ 0.584210] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.584343] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 0.584475] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.584607] system 00:09: [mem 0xfeaff000-0xfeafffff] has been reserved
- [ 0.584738] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.584868] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
- [ 0.585002] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 0.585137] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
- [ 0.585271] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 0.590027] pci 0000:00:1c.1: BAR 9: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
- [ 0.590244] pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff]
- [ 0.590375] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
- [ 0.590504] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
- [ 0.590637] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf04fffff]
- [ 0.590768] pci 0000:00:1c.0: bridge window [mem 0xf0a00000-0xf0bfffff 64bit pref]
- [ 0.590986] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
- [ 0.591114] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
- [ 0.591248] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
- [ 0.591383] pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
- [ 0.591601] pci 0000:00:1e.0: PCI bridge to [bus 0f-0f]
- [ 0.591728] pci 0000:00:1e.0: bridge window [io disabled]
- [ 0.591857] pci 0000:00:1e.0: bridge window [mem disabled]
- [ 0.591988] pci 0000:00:1e.0: bridge window [mem pref disabled]
- [ 0.592136] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.592271] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.592281] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.592414] pci 0000:00:1c.1: setting latency timer to 64
- [ 0.592419] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.592423] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.592425] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.592427] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.592429] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
- [ 0.592431] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
- [ 0.592433] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfeafffff]
- [ 0.592435] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
- [ 0.592437] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff]
- [ 0.592439] pci_bus 0000:02: resource 2 [mem 0xf0a00000-0xf0bfffff 64bit pref]
- [ 0.592441] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
- [ 0.592443] pci_bus 0000:04: resource 1 [mem 0xf0500000-0xf05fffff]
- [ 0.592445] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
- [ 0.592447] pci_bus 0000:0f: resource 4 [io 0x0000-0x0cf7]
- [ 0.592449] pci_bus 0000:0f: resource 5 [io 0x0d00-0xffff]
- [ 0.592451] pci_bus 0000:0f: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.592453] pci_bus 0000:0f: resource 7 [mem 0x000d4000-0x000d7fff]
- [ 0.592455] pci_bus 0000:0f: resource 8 [mem 0x000d8000-0x000dbfff]
- [ 0.592457] pci_bus 0000:0f: resource 9 [mem 0xc0000000-0xfeafffff]
- [ 0.592490] NET: Registered protocol family 2
- [ 0.592738] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.593814] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- [ 0.595730] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.596078] TCP: Hash tables configured (established 524288 bind 65536)
- [ 0.596209] TCP reno registered
- [ 0.596338] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.596490] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.596738] NET: Registered protocol family 1
- [ 0.596971] RPC: Registered udp transport module.
- [ 0.597100] RPC: Registered tcp transport module.
- [ 0.597227] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.597367] pci 0000:00:02.0: Boot video device
- [ 0.597478] PCI: CLS 64 bytes, default 64
- [ 0.597501] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.597631] Placing 64MB software IO TLB between ffff8800aee7a000 - ffff8800b2e7a000
- [ 0.597845] software IO TLB at phys 0xaee7a000 - 0xb2e7a000
- [ 0.598283] Simple Boot Flag at 0x3e set to 0x80
- [ 0.599699] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
- [ 0.599833] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
- [ 0.599967] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
- [ 0.600101] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
- [ 0.600275] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.600493] Scanning for low memory corruption every 60 seconds
- [ 0.600816] audit: initializing netlink socket (disabled)
- [ 0.600954] type=2000 audit(1299029755.429:1): initialized
- [ 0.617227] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.620351] VFS: Disk quotas dquot_6.5.2
- [ 0.620543] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.621696] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 0.622105] NTFS driver 2.1.29 [Flags: R/W].
- [ 0.622399] fuse init (API version 7.15)
- [ 0.622864] JFS: nTxBlock = 8192, nTxLock = 65536
- [ 0.624588] SGI XFS with security attributes, large block/inode numbers, no debug enabled
- [ 0.625823] GFS2 (built Feb 26 2011 17:11:22) installed
- [ 0.625954] msgmni has been set to 7257
- [ 0.626174] SELinux: Registering netfilter hooks
- [ 0.626481] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.626696] io scheduler noop registered
- [ 0.626818] io scheduler deadline registered
- [ 0.627010] io scheduler cfq registered (default)
- [ 0.627331] \_SB_.PCI0:_OSC invalid UUID
- [ 0.627332] _OSC request data:1 0 1d
- [ 0.627398] \_SB_.PCI0:_OSC invalid UUID
- [ 0.627399] _OSC request data:1 0 1d
- [ 0.627520] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.627930] Non-volatile memory driver v1.3
- [ 0.628053] Linux agpgart interface v0.103
- [ 0.628229] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
- [ 0.628487] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
- [ 0.629352] agpgart-intel 0000:00:00.0: detected 131072K stolen memory, trimming to 32768K
- [ 0.648703] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
- [ 0.649038] intel_idle: MWAIT substates: 0x1120
- [ 0.649039] intel_idle: v0.4 model 0x25
- [ 0.649041] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 0.651699] ACPI: AC Adapter [ADP1] (on-line)
- [ 0.652067] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
- [ 0.656735] ACPI: Lid Switch [LID0]
- [ 0.656942] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
- [ 0.657161] ACPI: Sleep Button [SLPB]
- [ 0.657349] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- [ 0.657559] ACPI: Power Button [PWRF]
- [ 0.657747] ACPI: acpi_idle yielding to intel_idle
- [ 0.682668] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.682799] ACPI: Thermal Zone [TZS0] (21 C)
- [ 0.690890] thermal LNXTHERM:01: registered as thermal_zone1
- [ 0.691022] ACPI: Thermal Zone [TZS1] (30 C)
- [ 0.691435] [drm] Initialized drm 1.1.0 20060810
- [ 0.691580] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.691715] i915 0000:00:02.0: setting latency timer to 64
- [ 0.753971] i915 0000:00:02.0: irq 40 for MSI/MSI-X
- [ 0.814323] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 0.851858] ACPI: Battery Slot [BAT0] (battery present)
- [ 0.860110] fbcon: inteldrmfb (fb0) is primary device
- [ 0.922042] Console: switching to colour frame buffer device 170x48
- [ 0.924839] fb0: inteldrmfb frame buffer device
- [ 0.924865] drm: registered panic notifier
- [ 0.953162] acpi device:07: registered as cooling_device4
- [ 0.953539] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input3
- [ 0.953584] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 0.953767] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 0.953852] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.987188] brd: module loaded
- [ 0.988022] loop: module loaded
- [ 0.988048] Uniform Multi-Platform E-IDE driver
- [ 0.988133] ide-gd driver 1.18
- [ 0.988382] ahci 0000:00:1f.2: version 3.0
- [ 0.988402] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.988474] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
- [ 0.988497] ahci: SSS flag set, parallel bus scan disabled
- [ 0.988546] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x11 impl SATA mode
- [ 0.988585] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
- [ 0.988628] ahci 0000:00:1f.2: setting latency timer to 64
- [ 0.991059] scsi0 : ahci
- [ 0.991200] scsi1 : ahci
- [ 0.991313] scsi2 : ahci
- [ 0.991429] scsi3 : ahci
- [ 0.991535] scsi4 : ahci
- [ 0.991675] ata1: SATA max UDMA/133 abar m2048@0xf0808000 port 0xf0808100 irq 41
- [ 0.991709] ata2: DUMMY
- [ 0.991724] ata3: DUMMY
- [ 0.993012] ata4: DUMMY
- [ 0.994277] ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 41
- [ 0.996080] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 0.997398] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 0.998734] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
- [ 1.000028] e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
- [ 1.001355] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
- [ 1.002642] e100: Copyright(c) 1999-2006 Intel Corporation
- [ 1.003966] tg3.c:v3.115 (October 14, 2010)
- [ 1.005277] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.006613] tg3 0000:02:00.0: setting latency timer to 64
- [ 1.016008] tg3 mdio bus: probed
- [ 1.022851] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 20:6a:8a:1b:87:2b
- [ 1.024200] tg3 0000:02:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01)
- [ 1.025558] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
- [ 1.026909] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
- [ 1.028288] sky2: driver version 1.28
- [ 1.029742] ath9k 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 1.031126] ath9k 0000:04:00.0: setting latency timer to 64
- [ 1.119050] ath: EEPROM regdomain: 0x65
- [ 1.119052] ath: EEPROM indicates we should expect a direct regpair map
- [ 1.119055] ath: Country alpha2 being used: 00
- [ 1.119056] ath: Regpair used: 0x65
- [ 1.119652] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
- [ 1.119972] Registered led device: ath9k-phy0::radio
- [ 1.120006] Registered led device: ath9k-phy0::assoc
- [ 1.120043] Registered led device: ath9k-phy0::tx
- [ 1.120078] Registered led device: ath9k-phy0::rx
- [ 1.120086] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90011c20000, irq=17
- [ 1.121504] console [netcon0] enabled
- [ 1.122853] netconsole: network logging started
- [ 1.124345] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.125728] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
- [ 1.125746] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.127157] ehci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 1.127160] ehci_hcd 0000:00:1a.0: EHCI Host Controller
- [ 1.128571] drivers/usb/core/inode.c: creating file 'devices'
- [ 1.128575] drivers/usb/core/inode.c: creating file '001'
- [ 1.128633] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 1.134107] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
- [ 1.134117] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
- [ 1.134134] ehci_hcd 0000:00:1a.0: support lpm
- [ 1.134143] ehci_hcd 0000:00:1a.0: debug port 2
- [ 1.135503] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 1.139422] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
- [ 1.139424] ehci_hcd 0000:00:1a.0: supports USB remote wakeup
- [ 1.139437] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0806000
- [ 1.140799] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 1.144720] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 1.150075] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 1.151485] usb usb1: default language 0x0409
- [ 1.151491] usb usb1: udev 1, busnum 1, minor = 0
- [ 1.151493] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.152856] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.154210] usb usb1: Product: EHCI Host Controller
- [ 1.155551] usb usb1: Manufacturer: Linux 2.6.37.2-escobar2 ehci_hcd
- [ 1.156887] usb usb1: SerialNumber: 0000:00:1a.0
- [ 1.158287] usb usb1: usb_probe_device
- [ 1.158290] usb usb1: configuration #1 chosen from 1 choice
- [ 1.158297] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 1.158342] hub 1-0:1.0: usb_probe_interface
- [ 1.158344] hub 1-0:1.0: usb_probe_interface - got id
- [ 1.158346] hub 1-0:1.0: USB hub found
- [ 1.159680] hub 1-0:1.0: 3 ports detected
- [ 1.161005] hub 1-0:1.0: standalone hub
- [ 1.161006] hub 1-0:1.0: no power switching (usb 1.0)
- [ 1.161008] hub 1-0:1.0: individual port over-current protection
- [ 1.161010] hub 1-0:1.0: power on to power good time: 20ms
- [ 1.161014] hub 1-0:1.0: local power source is good
- [ 1.161017] hub 1-0:1.0: trying to enable port power on non-switchable hub
- [ 1.161041] drivers/usb/core/inode.c: creating file '001'
- [ 1.161089] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 1.162471] ehci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 1.162474] ehci_hcd 0000:00:1d.0: EHCI Host Controller
- [ 1.163817] drivers/usb/core/inode.c: creating file '002'
- [ 1.163869] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 1.168046] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
- [ 1.168056] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
- [ 1.168071] ehci_hcd 0000:00:1d.0: support lpm
- [ 1.168080] ehci_hcd 0000:00:1d.0: debug port 2
- [ 1.169408] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 1.173340] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
- [ 1.173342] ehci_hcd 0000:00:1d.0: supports USB remote wakeup
- [ 1.173354] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0807000
- [ 1.174673] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 1.178608] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 1.182023] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 1.183346] usb usb2: default language 0x0409
- [ 1.183351] usb usb2: udev 1, busnum 2, minor = 128
- [ 1.183353] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.184647] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.185962] usb usb2: Product: EHCI Host Controller
- [ 1.187282] usb usb2: Manufacturer: Linux 2.6.37.2-escobar2 ehci_hcd
- [ 1.188627] usb usb2: SerialNumber: 0000:00:1d.0
- [ 1.190021] usb usb2: usb_probe_device
- [ 1.190024] usb usb2: configuration #1 chosen from 1 choice
- [ 1.190029] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 1.190081] hub 2-0:1.0: usb_probe_interface
- [ 1.190083] hub 2-0:1.0: usb_probe_interface - got id
- [ 1.190084] hub 2-0:1.0: USB hub found
- [ 1.191384] hub 2-0:1.0: 3 ports detected
- [ 1.192683] hub 2-0:1.0: standalone hub
- [ 1.192685] hub 2-0:1.0: no power switching (usb 1.0)
- [ 1.192686] hub 2-0:1.0: individual port over-current protection
- [ 1.192688] hub 2-0:1.0: power on to power good time: 20ms
- [ 1.192691] hub 2-0:1.0: local power source is good
- [ 1.192693] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 1.192715] drivers/usb/core/inode.c: creating file '001'
- [ 1.192780] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.194117] ohci_hcd: block sizes: ed 80 td 96
- [ 1.194157] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.195570] usbcore: registered new interface driver usblp
- [ 1.196885] Initializing USB Mass Storage driver...
- [ 1.198232] usbcore: registered new interface driver usb-storage
- [ 1.199548] USB Mass Storage support registered.
- [ 1.200899] usbcore: registered new interface driver libusual
- [ 1.202307] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 1.220588] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.221935] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 1.223360] mice: PS/2 mouse device common for all mice
- [ 1.224933] rtc_cmos 00:06: RTC can wake from S4
- [ 1.232233] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
- [ 1.233511] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 1.234812] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 1.236101] ACPI: resource 0000:00:1f.3 [io 0x1840-0x185f] conflicts with ACPI region SMBI [io 0x1840-0x184f 64bit pref window disabled]
- [ 1.237459] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 1.238875] lirc_dev: IR Remote Control driver registered, major 251
- [ 1.240211] IR NEC protocol handler initialized
- [ 1.241503] IR RC5(x) protocol handler initialized
- [ 1.242801] IR RC6 protocol handler initialized
- [ 1.242892] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 1.245408] IR JVC protocol handler initialized
- [ 1.246726] IR Sony protocol handler initialized
- [ 1.248036] IR RC5 (streamzap) protocol handler initialized
- [ 1.249341] IR LIRC bridge handler initialized
- [ 1.250637] Linux video capture interface: v2.00
- [ 1.252164] usbcore: registered new interface driver em28xx
- [ 1.253492] em28xx driver loaded
- [ 1.254812] gspca: v2.10.0 registered
- [ 1.255080] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 1.255085] hub 1-0:1.0: port 1: status 0501 change 0001
- [ 1.256165] usbcore: registered new interface driver uvcvideo
- [ 1.257490] USB Video Class driver (v1.0.0)
- [ 1.259045] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
- [ 1.260918] cpuidle: using governor ladder
- [ 1.261819] cpuidle: using governor menu
- [ 1.262741] usbcore: registered new interface driver usbhid
- [ 1.262742] usbhid: USB HID core driver
- [ 1.262794] acer-wmi: Acer Laptop ACPI-WMI Extras
- [ 1.262917] acer-wmi: Unable to detect available WMID devices
- [ 1.263009] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 1.263065] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
- [ 1.263086] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 1.280576] hda_codec: ALC272X: BIOS auto-probing.
- [ 1.291249] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
- [ 1.292632] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 1.292636] hub 2-0:1.0: port 1: status 0501 change 0001
- [ 1.292746] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
- [ 1.294392] ALSA device list:
- [ 1.296721] #0: HDA Intel at 0xf0800000 irq 42
- [ 1.299554] Netfilter messages via NETLINK v0.30.
- [ 1.302318] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 1.303009] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.307930] ata1.00: ATA-8: WDC WD2500BEVT-22A23T0, 01.01A01, max UDMA/133
- [ 1.308219] ctnetlink v0.93: registering with nfnetlink.
- [ 1.308602] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.308639] TCP cubic registered
- [ 1.308640] Initializing XFRM netlink socket
- [ 1.308887] NET: Registered protocol family 10
- [ 1.309665] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.309706] IPv6 over IPv4 tunneling driver
- [ 1.310281] NET: Registered protocol family 17
- [ 1.310298] Registering the dns_resolver key type
- [ 1.321562] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.324176] ata1.00: configured for UDMA/133
- [ 1.324440] PM: Hibernation image not present or could not be loaded.
- [ 1.324451] registered taskstats version 1
- [ 1.324709] Magic number: 3:262:558
- [ 1.324779] misc vga_arbiter: hash matches
- [ 1.329860] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-2 01.0 PQ: 0 ANSI: 5
- [ 1.332900] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
- [ 1.333201] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.338209] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.340742] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.340793] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.354964] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
- [ 1.354985] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 1.402759] sda: sda1 sda2 sda3
- [ 1.405517] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.409168] ehci_hcd 0000:00:1a.0: port 1 high speed
- [ 1.409180] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.459776] usb 1-1: new high speed USB device using ehci_hcd and address 2
- [ 1.512988] ehci_hcd 0000:00:1a.0: port 1 high speed
- [ 1.512996] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.575703] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
- [ 1.575709] ehci_hcd 0000:00:1a.0: LPM: no device attached
- [ 1.575952] usb 1-1: udev 2, busnum 1, minor = 1
- [ 1.575957] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
- [ 1.577305] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.579012] usb 1-1: usb_probe_device
- [ 1.579021] usb 1-1: configuration #1 chosen from 1 choice
- [ 1.579219] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
- [ 1.579427] hub 1-1:1.0: usb_probe_interface
- [ 1.579433] hub 1-1:1.0: usb_probe_interface - got id
- [ 1.579438] hub 1-1:1.0: USB hub found
- [ 1.580965] hub 1-1:1.0: 6 ports detected
- [ 1.583512] hub 1-1:1.0: standalone hub
- [ 1.583517] hub 1-1:1.0: individual port power switching
- [ 1.583521] hub 1-1:1.0: individual port over-current protection
- [ 1.583525] hub 1-1:1.0: Single TT
- [ 1.583529] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 1.583534] hub 1-1:1.0: Port indicators are supported
- [ 1.583538] hub 1-1:1.0: power on to power good time: 100ms
- [ 1.583798] hub 1-1:1.0: local power source is good
- [ 1.583805] hub 1-1:1.0: enabling power on all ports
- [ 1.584718] drivers/usb/core/inode.c: creating file '002'
- [ 1.584784] hub 2-0:1.0: state 7 ports 3 chg 0002 evt 0000
- [ 1.584797] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 1.635653] ehci_hcd 0000:00:1d.0: port 1 high speed
- [ 1.635666] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.684667] hub 1-1:1.0: port 2: status 0101 change 0001
- [ 1.686455] usb 2-1: new high speed USB device using ehci_hcd and address 2
- [ 1.739597] ehci_hcd 0000:00:1d.0: port 1 high speed
- [ 1.739604] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.785271] usb 1-1: link qh256-0001/ffff880133249f80 start 1 [1/0 us]
- [ 1.802316] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
- [ 1.802322] ehci_hcd 0000:00:1d.0: LPM: no device attached
- [ 1.802563] usb 2-1: udev 2, busnum 2, minor = 129
- [ 1.802567] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
- [ 1.804509] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.807509] usb 2-1: usb_probe_device
- [ 1.807516] usb 2-1: configuration #1 chosen from 1 choice
- [ 1.807706] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
- [ 1.807890] hub 2-1:1.0: usb_probe_interface
- [ 1.807896] hub 2-1:1.0: usb_probe_interface - got id
- [ 1.807901] hub 2-1:1.0: USB hub found
- [ 1.810696] hub 2-1:1.0: 8 ports detected
- [ 1.812087] hub 2-1:1.0: standalone hub
- [ 1.812088] hub 2-1:1.0: individual port power switching
- [ 1.812090] hub 2-1:1.0: individual port over-current protection
- [ 1.812091] hub 2-1:1.0: Single TT
- [ 1.812093] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 1.812095] hub 2-1:1.0: Port indicators are supported
- [ 1.812096] hub 2-1:1.0: power on to power good time: 100ms
- [ 1.812408] hub 2-1:1.0: local power source is good
- [ 1.812414] hub 2-1:1.0: enabling power on all ports
- [ 1.813434] drivers/usb/core/inode.c: creating file '002'
- [ 1.813486] hub 1-1:1.0: state 7 ports 6 chg 0004 evt 0000
- [ 1.813668] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
- [ 1.824339] hub 1-1:1.0: port 2 not reset yet, waiting 10ms
- [ 1.886310] usb 1-1.2: new low speed USB device using ehci_hcd and address 3
- [ 1.899148] hub 1-1:1.0: port 2 not reset yet, waiting 10ms
- [ 1.913619] hub 2-1:1.0: port 5: status 0101 change 0001
- [ 1.975166] usb 1-1.2: skipped 1 descriptor after interface
- [ 1.975750] usb 1-1.2: default language 0x0409
- [ 1.976937] usb 1-1.2: udev 3, busnum 1, minor = 2
- [ 1.976943] usb 1-1.2: New USB device found, idVendor=15d9, idProduct=0a4d
- [ 1.979548] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 1.982087] usb 1-1.2: Product: USB OPTICAL MOUSE
- [ 1.984944] usb 1-1.2: usb_probe_device
- [ 1.984952] usb 1-1.2: configuration #1 chosen from 1 choice
- [ 1.985301] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
- [ 1.985499] usbhid 1-1.2:1.0: usb_probe_interface
- [ 1.985505] usbhid 1-1.2:1.0: usb_probe_interface - got id
- [ 1.988039] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input7
- [ 1.991164] generic-usb 0003:15D9:0A4D.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.2/input0
- [ 1.993941] drivers/usb/core/inode.c: creating file '003'
- [ 1.994006] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0004
- [ 2.013873] usb 2-1: link qh256-0001/ffff880133249f00 start 1 [1/0 us]
- [ 2.013916] hub 2-1:1.0: state 7 ports 8 chg 0020 evt 0000
- [ 2.014089] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s
- [ 2.025003] hub 2-1:1.0: port 5 not reset yet, waiting 10ms
- [ 2.054775] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 2.058585] ata5.00: ATAPI: MATSHITADVD-RAM UJ890AS, 1.00, max UDMA/100
- [ 2.062828] ata5.00: configured for UDMA/100
- [ 2.070380] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ890AS 1.00 PQ: 0 ANSI: 5
- [ 2.079294] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 2.081987] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 2.085004] sr 4:0:0:0: Attached scsi CD-ROM sr0
- [ 2.085266] sr 4:0:0:0: Attached scsi generic sg1 type 5
- [ 2.086836] usb 2-1.5: new high speed USB device using ehci_hcd and address 3
- [ 2.101766] hub 2-1:1.0: port 5 not reset yet, waiting 10ms
- [ 2.202991] usb 2-1.5: skipped 1 descriptor after configuration
- [ 2.202999] usb 2-1.5: skipped 5 descriptors after interface
- [ 2.203005] usb 2-1.5: skipped 1 descriptor after endpoint
- [ 2.203011] usb 2-1.5: skipped 11 descriptors after interface
- [ 2.203938] usb 2-1.5: default language 0x0409
- [ 2.207207] usb 2-1.5: udev 3, busnum 2, minor = 130
- [ 2.207215] usb 2-1.5: New USB device found, idVendor=04f2, idProduct=b1d8
- [ 2.209926] usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
- [ 2.212672] usb 2-1.5: Product: 1.3M WebCam
- [ 2.215325] usb 2-1.5: Manufacturer: Sonix Technology Co., Ltd.
- [ 2.217024] usb 2-1.5: usb_probe_device
- [ 2.217027] usb 2-1.5: configuration #1 chosen from 1 choice
- [ 2.217443] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0)
- [ 2.219375] uvcvideo 2-1.5:1.0: usb_probe_interface
- [ 2.219382] uvcvideo 2-1.5:1.0: usb_probe_interface - got id
- [ 2.219403] uvcvideo: Found UVC 1.00 device 1.3M WebCam (04f2:b1d8)
- [ 2.227598] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input8
- [ 2.231562] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input9
- [ 2.234179] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1)
- [ 2.236074] drivers/usb/core/inode.c: creating file '003'
- [ 2.236141] md: Waiting for all devices to be available before autodetect
- [ 2.239025] md: If you don't use raid, use raid=noautodetect
- [ 2.242344] md: Autodetecting RAID arrays.
- [ 2.245219] md: Scanned 0 and added 0 devices.
- [ 2.248100] md: autorun ...
- [ 2.250933] md: ... autorun DONE.
- [ 2.273538] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240)
- [ 2.275418] EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (240)
- [ 2.330335] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.331858] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
- [ 2.333404] Freeing unused kernel memory: 604k freed
- [ 2.334947] Write protecting the kernel read-only data: 12288k
- [ 2.336753] Freeing unused kernel memory: 624k freed
- [ 2.338485] Freeing unused kernel memory: 1464k freed
- [ 3.430167] consoletype used greatest stack depth: 5352 bytes left
- [ 3.606196] stty used greatest stack depth: 3896 bytes left
- [ 5.279460] udev: starting version 151
- [ 5.279554] udevd (1438): /proc/1438/oom_adj is deprecated, please use /proc/1438/oom_score_adj instead.
- [ 5.442907] usb 2-1.5: link qh4-0001/ffff880130f91a80 start 2 [1/0 us]
- [ 5.442940] usb 2-1.5: unlink qh4-0001/ffff880130f91a80 start 2 [1/0 us]
- [ 6.583302] EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
- [ 6.583666] EXT4-fs (sda3): re-mounted. Opts: (null)
- [ 7.594047] Adding 1060284k swap on /dev/sda2. Priority:-1 extents:1 across:1060284k
- [ 18.098859] tg3 0000:02:00.0: irq 43 for MSI/MSI-X
- [ 18.110111] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 18.173599] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 19.028663] tg3 0000:02:00.0: eth0: Link is down
- [ 19.671247] ehci_hcd 0000:00:1d.0: reused qh ffff880130f91a80 schedule
- [ 19.671252] usb 2-1.5: link qh4-0001/ffff880130f91a80 start 2 [1/0 us]
- [ 19.736666] usb 2-1.5: unlink qh4-0001/ffff880130f91a80 start 2 [1/0 us]
- [ 23.724554] usb 1-1.2: link qh8-0601/ffff880130f94c00 start 2 [1/2 us]
- [ 23.764482] usb 1-1.2: unlink qh8-0601/ffff880130f94c00 start 2 [1/2 us]
- [ 24.123872] ehci_hcd 0000:00:1a.0: reused qh ffff880130f94c00 schedule
- [ 24.123881] usb 1-1.2: link qh8-0601/ffff880130f94c00 start 2 [1/2 us]
- [ 24.147808] usb 1-1.2: unlink qh8-0601/ffff880130f94c00 start 2 [1/2 us]
- [ 24.301566] ehci_hcd 0000:00:1a.0: reused qh ffff880130f94c00 schedule
- [ 24.301575] usb 1-1.2: link qh8-0601/ffff880130f94c00 start 2 [1/2 us]
- [ 56.987862] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
- [ 56.987870] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
- [ 56.992617] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
- [ 56.992624] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
- [ 70.445408] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
- [ 71.067152] EXT4-fs (sda3): re-mounted. Opts: commit=0
- [ 73.079114] wlan0: authenticate with 30:46:9a:7d:2c:4c (try 1)
- [ 73.081133] wlan0: authenticated
- [ 73.081166] wlan0: associate with 30:46:9a:7d:2c:4c (try 1)
- [ 73.085236] wlan0: RX AssocResp from 30:46:9a:7d:2c:4c (capab=0x411 status=0 aid=1)
- [ 73.085243] wlan0: associated
- [ 73.094078] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 83.644657] wlan0: no IPv6 routers present
- [ 300.907763] kworker/u:0 used greatest stack depth: 3512 bytes left
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement