dmesg

[root@master log]# dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-358.11.1.el6.x86_64 ([email protected]) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Wed Jun 12 03:34:52 UTC 2013
Command line: ro root=/dev/mapper/vg_master-lv_root nomodeset rd_NO_LUKS LANG=en_US.UTF-8  KEYBOARDTYPE=pc KEYTABLE=us-acentos rd_NO_MD rd_LVM_LV=vg_master/lv_swap SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_master/lv_root rd_NO_DM rhgb quiet splash apci.power_nocheck=1
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
 BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cffa0000 (usable)
 BIOS-e820: 00000000cffa0000 - 00000000cffae000 (ACPI data)
 BIOS-e820: 00000000cffae000 - 00000000cfff0000 (ACPI NVS)
 BIOS-e820: 00000000cfff0000 - 00000000e0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
DMI present.
SMBIOS version 2.5 @ 0xFBBE0
DMI: Haier T68D/T68D, BIOS SKD103 01/06/2010
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0E0000000 mask FE0000000 uncachable
  1 base 000000000 mask F00000000 write-back
  2 base 100000000 mask FE0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 3584MB, range: 512MB, type UC
reg 1, base: 0GB, range: 4GB, type WB
reg 2, base: 4GB, range: 512MB, type WB
total RAM covered: 4096M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 1G 	num_reg: 3  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 4GB, range: 512MB, type WB
e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cffa0000
 0000000000 - 00cfe00000 page 2M
 00cfe00000 - 00cffa0000 page 4k
kernel direct mapping tables up to cffa0000 @ 10000-16000
init_memory_mapping: 0000000100000000-0000000120000000
 0100000000 - 0120000000 page 2M
kernel direct mapping tables up to 120000000 @ 14000-16000
RAMDISK: 3717b000 - 37fef7e3
ACPI: RSDP 00000000000fa3c0 00024 (v02 ACPIAM)
ACPI: XSDT 00000000cffa0100 0006C (v01 ?????? ???????? 20100106 MSFT 00000097)
ACPI: FACP 00000000cffa0290 000F4 (v03 010610 FACP1212 20100106 MSFT 00000097)
ACPI: DSDT 00000000cffa0620 08654 (v01 Pegaco     T68D 00000001 MSFT 03000001)
ACPI: FACS 00000000cffae000 00040
ACPI: APIC 00000000cffa0390 00080 (v01 010610 APIC1212 20100106 MSFT 00000097)
ACPI: MCFG 00000000cffa0410 0003C (v01 010610 OEMMCFG  20100106 MSFT 00000097)
ACPI: SLIC 00000000cffa0450 00176 (v01 ?????? ???????? 20100106 MSFT 00000097)
ACPI: WDRT 00000000cffa05d0 00047 (v01 010610 NV-WDRT  20100106 MSFT 00000097)
ACPI: OEMB 00000000cffae040 000AD (v01 010610 OEMB1212 20100106 MSFT 00000097)
ACPI: HPET 00000000cffaa620 00038 (v01 010610 OEMHPET0 20100106 MSFT 00000097)
ACPI: NVHD 00000000cffae0f0 00284 (v01 010610  NVHDCP  20100106 MSFT 00000097)
ACPI: SSDT 00000000cffaec80 004F0 (v01  PmRef    CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-0000000120000000
Bootmem setup node 0 0000000000000000-0000000120000000
  NODE_DATA [0000000000015000 - 0000000000048fff]
  bootmap [0000000000049000 -  000000000006cfff] pages 24
(8 early reservations) ==> bootmem [0000000000 - 0120000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 000201b0a4]    TEXT DATA BSS ==> [0001000000 - 000201b0a4]
  #3 [003717b000 - 0037fef7e3]          RAMDISK ==> [003717b000 - 0037fef7e3]
  #4 [000009e800 - 0000100000]    BIOS reserved ==> [000009e800 - 0000100000]
  #5 [000201c000 - 000201c13b]              BRK ==> [000201c000 - 000201c13b]
  #6 [0000010000 - 0000014000]          PGTABLE ==> [0000010000 - 0000014000]
  #7 [0000014000 - 0000015000]          PGTABLE ==> [0000014000 - 0000015000]
found SMP MP-table at [ffff8800000ff780] ff780
Reserving 129MB of memory at 48MB for crashkernel (System RAM: 4608MB)
 [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bbfffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00120000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009e
    0: 0x00000100 -> 0x000cffa0
    0: 0x00100000 -> 0x00120000
On node 0 totalpages: 982830
  DMA zone: 56 pages used for memmap
  DMA zone: 105 pages reserved
  DMA zone: 3821 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 833496 pages, LIFO batch:31
  Normal zone: 1792 pages used for memmap
  Normal zone: 129280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000cffa0000 - 00000000cffae000
PM: Registered nosave memory: 00000000cffae000 - 00000000cfff0000
PM: Registered nosave memory: 00000000cfff0000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff700000
PM: Registered nosave memory: 00000000ff700000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94552 r8192 d24232 u524288
pcpu-alloc: s94552 r8192 d24232 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 966597
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_master-lv_root nomodeset rd_NO_LUKS LANG=en_US.UTF-8  KEYBOARDTYPE=pc KEYTABLE=us-acentos rd_NO_MD rd_LVM_LV=vg_master/lv_swap SYSFONT=latarcyrheb-sun16 crashkernel=129M@0M rd_LVM_LV=vg_master/lv_root rd_NO_DM rhgb quiet splash apci.power_nocheck=1
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 3645572k/4718592k available (5221k kernel code, 787272k absent, 285748k reserved, 7120k data, 1264k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:440
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 15728640 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2200.102 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.20 BogoMIPS (lpj=2200102)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21433 entries in 85 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel Pentium(R) Dual-Core CPU       T4400  @ 2.20GHz stepping 0a
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1
Brought up 2 CPUs
Total of 2 processors activated (8800.40 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at cffae000 (270336 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31
PCI: MCFG area at fc000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at fc000000 - fdffffff
ACPI: Power Resource [PF0] (on)
ACPI: Power Resource [PF1] (on)
ACPI: Power Resource [PF2] (on)
ACPI: Power Resource [PF3] (on)
ACPI: Power Resource [PF4] (on)
ACPI: Power Resource [PF5] (on)
ACPI: Power Resource [PF6] (on)
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfbffffff]
pci_root PNP0A08:00: host bridge window [mem 0xfe000000-0xfebfffff]
pci 0000:00:03.0: reg 10: [io  0x4f00-0x4fff]
pci 0000:00:03.2: reg 10: [io  0x4900-0x493f]
pci 0000:00:03.2: reg 20: [io  0x4d00-0x4d3f]
pci 0000:00:03.2: reg 24: [io  0x4e00-0x4e3f]
pci 0000:00:03.2: PME# supported from D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:03.5: reg 10: [mem 0xfae80000-0xfaefffff]
pci 0000:00:04.0: reg 10: [mem 0xfae7f000-0xfae7ffff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:04.1: reg 10: [mem 0xfae7ec00-0xfae7ecff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: PME# disabled
pci 0000:00:08.0: reg 10: [mem 0xfae78000-0xfae7bfff]
pci 0000:00:08.0: PME# supported from D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:0b.0: reg 10: [io  0xb080-0xb087]
pci 0000:00:0b.0: reg 14: [io  0xb000-0xb003]
pci 0000:00:0b.0: reg 18: [io  0xac00-0xac07]
pci 0000:00:0b.0: reg 1c: [io  0xa880-0xa883]
pci 0000:00:0b.0: reg 20: [io  0xa800-0xa80f]
pci 0000:00:0b.0: reg 24: [mem 0xfae7c000-0xfae7dfff]
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PME# disabled
pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:17.0: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:09.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:09.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:09.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0xe0000000-0xfbffffff] (subtractive decode)
pci 0000:00:09.0:   bridge window [mem 0xfe000000-0xfebfffff] (subtractive decode)
pci 0000:02:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit pref]
pci 0000:02:00.0: reg 24: [io  0xcc00-0xcc7f]
pci 0000:02:00.0: reg 30: [mem 0xfafe0000-0xfaffffff pref]
pci 0000:00:10.0: PCI bridge to [bus 02-02]
pci 0000:00:10.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:10.0:   bridge window [mem 0xfaf00000-0xfbffffff]
pci 0000:00:10.0:   bridge window [mem 0xe0000000-0xf5ffffff 64bit pref]
pci 0000:00:15.0: PCI bridge to [bus 03-05]
pci 0000:00:15.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:15.0:   bridge window [mem 0xfe000000-0xfe9fffff]
pci 0000:00:15.0:   bridge window [mem 0xf6000000-0xf9efffff 64bit pref]
pci 0000:06:00.0: reg 10: [mem 0xfeaf0000-0xfeafffff 64bit]
pci 0000:06:00.0: supports D1
pci 0000:06:00.0: PME# supported from D0 D1 D3hot
pci 0000:06:00.0: PME# disabled
pci 0000:00:16.0: PCI bridge to [bus 06-06]
pci 0000:00:16.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:16.0:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:16.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:07:00.0: reg 10: [io  0xe800-0xe8ff]
pci 0000:07:00.0: reg 18: [mem 0xf9fff000-0xf9ffffff 64bit pref]
pci 0000:07:00.0: reg 20: [mem 0xf9fe0000-0xf9feffff 64bit pref]
pci 0000:07:00.0: reg 30: [mem 0xfebe0000-0xfebfffff pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:17.0: PCI bridge to [bus 07-07]
pci 0000:00:17.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:17.0:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:17.0:   bridge window [mem 0xf9f00000-0xf9ffffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0A] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0B] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0C] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0D] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1A] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1B] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1C] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1D] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2A] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2B] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2C] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2D] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3A] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3B] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3C] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3D] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4A] (IRQs 3 7 *9 10 11 14 15 16 17 18 19)
ACPI: PCI Interrupt Link [LN4B] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4C] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4D] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5A] (IRQs 3 7 9 10 11 14 *15 16 17 18 19)
ACPI: PCI Interrupt Link [LN5B] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5C] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5D] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6A] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6B] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6C] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6D] (IRQs 3 7 9 10 11 14 15 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *14
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *16
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *9
ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
hpet0: 4 comparators, 64-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x000c0000-0x000fffff]
pnp 00:00: [mem 0x00100000-0xdfffffff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [io  0x0cf8-0x0cff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0081-0x008f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io  0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io  0x00f0-0x00ff]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io  0x0010-0x001f]
pnp 00:05: [io  0x0022-0x003f]
pnp 00:05: [io  0x0044-0x005f]
pnp 00:05: [io  0x0063]
pnp 00:05: [io  0x0065]
pnp 00:05: [io  0x0067-0x006f]
pnp 00:05: [io  0x0072-0x0080]
pnp 00:05: [io  0x0090-0x009f]
pnp 00:05: [io  0x00a2-0x00bf]
pnp 00:05: [io  0x00e0-0x00ef]
pnp 00:05: [io  0x0378-0x037f]
pnp 00:05: [io  0x04d0-0x04d1]
pnp 00:05: [io  0x4000-0x407f]
pnp 00:05: [io  0x4080-0x40ff]
pnp 00:05: [io  0x4400-0x447f]
pnp 00:05: [io  0x4480-0x44ff]
pnp 00:05: [io  0x4800-0x487f]
pnp 00:05: [io  0x4880-0x48ff]
pnp 00:05: [io  0x4900-0x493f]
pnp 00:05: [io  0x4d00-0x4d3f]
pnp 00:05: [io  0x4e00-0x4e3f]
pnp 00:05: [io  0x4f00-0x4f7f]
pnp 00:05: [io  0x4f80-0x4fff]
pnp 00:05: [mem 0xfc000000-0xfdffffff]
pnp 00:05: [mem 0xfec00000-0xfec00fff]
pnp 00:05: [mem 0xfed01000-0xfed01fff]
pnp 00:05: [mem 0xfed40000-0xfed43ffe]
pnp 00:05: [mem 0xfee00000-0xfee00fff]
pnp 00:05: [mem 0xfee01000-0xfeefffff]
pnp 00:05: [mem 0xfefe1000-0xfefe1fff]
pnp 00:05: [mem 0xfefe2000-0xfefe3fff]
pnp 00:05: [mem 0xff800000-0xffffffff]
pnp 00:05: disabling [io  0x4f00-0x4f7f] because it overlaps 0000:00:03.0 BAR 0 [io  0x4f00-0x4fff]
pnp 00:05: disabling [io  0x4f80-0x4fff] because it overlaps 0000:00:03.0 BAR 0 [io  0x4f00-0x4fff]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [mem 0xfed00000-0xfed00fff]
pnp 00:06: [irq 2 disabled]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:07: [io  0x0070-0x0071]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io  0x0062]
pnp 00:08: [io  0x0066]
pnp 00:08: [io  0x0100-0x0103]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io  0x0060]
pnp 00:09: [io  0x0064]
pnp 00:09: [irq 1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0a: [irq 12]
pnp 00:0a: Plug and Play ACPI device, IDs STL3888 SYN2100 SYN0002 PNP0f13 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xdfffffff] could not be reserved
system 00:05: [io  0x0378-0x037f] has been reserved
system 00:05: [io  0x04d0-0x04d1] has been reserved
system 00:05: [io  0x4000-0x407f] has been reserved
system 00:05: [io  0x4080-0x40ff] has been reserved
system 00:05: [io  0x4400-0x447f] has been reserved
system 00:05: [io  0x4480-0x44ff] has been reserved
system 00:05: [io  0x4800-0x487f] has been reserved
system 00:05: [io  0x4880-0x48ff] has been reserved
system 00:05: [io  0x4900-0x493f] has been reserved
system 00:05: [io  0x4d00-0x4d3f] has been reserved
system 00:05: [io  0x4e00-0x4e3f] has been reserved
system 00:05: [mem 0xfc000000-0xfdffffff] has been reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:05: [mem 0xfed40000-0xfed43ffe] has been reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:05: [mem 0xfefe1000-0xfefe1fff] has been reserved
system 00:05: [mem 0xfefe2000-0xfefe3fff] has been reserved
system 00:05: [mem 0xff800000-0xffffffff] has been reserved
system 00:08: [io  0x0100-0x0103] has been reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:09.0: PCI bridge to [bus 01-01]
pci 0000:00:09.0: PCI bridge to [bus 01-01]
pci 0000:00:09.0:   bridge window [io  disabled]
pci 0000:00:09.0:   bridge window [mem disabled]
pci 0000:00:09.0:   bridge window [mem pref disabled]
pci 0000:00:10.0: PCI bridge to [bus 02-02]
pci 0000:00:10.0: PCI bridge to [bus 02-02]
pci 0000:00:10.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:10.0:   bridge window [mem 0xfaf00000-0xfbffffff]
pci 0000:00:10.0:   bridge window [mem 0xe0000000-0xf5ffffff 64bit pref]
pci 0000:00:15.0: PCI bridge to [bus 03-05]
pci 0000:00:15.0: PCI bridge to [bus 03-05]
pci 0000:00:15.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:15.0:   bridge window [mem 0xfe000000-0xfe9fffff]
pci 0000:00:15.0:   bridge window [mem 0xf6000000-0xf9efffff 64bit pref]
pci 0000:00:16.0: PCI bridge to [bus 06-06]
pci 0000:00:16.0: PCI bridge to [bus 06-06]
pci 0000:00:16.0:   bridge window [io  disabled]
pci 0000:00:16.0:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:16.0:   bridge window [mem pref disabled]
pci 0000:00:17.0: PCI bridge to [bus 07-07]
pci 0000:00:17.0: PCI bridge to [bus 07-07]
pci 0000:00:17.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:17.0:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:17.0:   bridge window [mem 0xf9f00000-0xf9ffffff 64bit pref]
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:10.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 23
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:15.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 22
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:16.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 21
  alloc irq_desc for 21 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:17.0: PCI INT A -> Link[LRP5] -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:17.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfbffffff]
pci_bus 0000:00: resource 8 [mem 0xfe000000-0xfebfffff]
pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0xe0000000-0xfbffffff]
pci_bus 0000:01: resource 8 [mem 0xfe000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfaf00000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xf5ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfe000000-0xfe9fffff]
pci_bus 0000:03: resource 2 [mem 0xf6000000-0xf9efffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:07: resource 2 [mem 0xf9f00000-0xf9ffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
  alloc irq_desc for 20 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:04.0: PCI INT A disabled
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
pci 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:04.1: PCI INT B disabled
pci 0000:02:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 14801k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1373817673.471:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7149
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 864C6FE3751E3B6C
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [1] registered
intel_idle: MWAIT substates: 0x2220
intel_idle: does not run on family 6 model 23
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (on)
ACPI: Fan [FAN1] (on)
ACPI: Fan [FAN2] (on)
ACPI: Fan [FAN3] (on)
ACPI: Fan [FAN4] (on)
ACPI: Fan [FAN5] (on)
ACPI: Fan [FAN6] (on)
ACPI: acpi_idle registered with cpuidle
ACPI: SSDT 00000000cffae450 001FA (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000cffae6e0 00594 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: SSDT 00000000cffae380 000CC (v01  PmRef  Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000cffae650 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (46 C)
ERST: Table is not found!
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input4
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:04.1: debug port 1
ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
ehci_hcd 0000:00:04.1: irq 23, io mem 0xfae7ec00
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-358.11.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:04.1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:04.0: irq 20, io mem 0xfae7f000
ACPI: Battery Slot [BAT] (battery present)
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-358.11.1.el6.x86_64 ohci_hcd
usb usb2: SerialNumber: 0000:00:04.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2013-07-14 16:01:15 UTC (1373817675)
Initalizing network drop monitor service
Freeing unused kernel memory: 1264k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 904k freed
Freeing unused kernel memory: 1676k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
dracut: dracut-004-303.el6
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: [email protected]
udev: starting version 147
ACPI: WMI: Mapper loaded
Switching to clocksource tsc
[Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
usb 1-7: new high speed USB device number 2 using ehci_hcd
usb 1-7: New USB device found, idVendor=04f2, idProduct=b012
usb 1-7: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-7: Product: USB2.0 1.3M UVC WebCam
usb 1-7: Manufacturer: Chicony Electronics Co., Ltd.
usb 1-7: SerialNumber: SN0001
usb 1-7: configuration #1 chosen from 1 choice
Switching to clocksource hpet
usb 1-8: new high speed USB device number 3 using ehci_hcd
acpi device:15: registered as cooling_device9
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:14/LNXVIDEO:00/input/input6
ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
usb 1-8: New USB device found, idVendor=0bda, idProduct=0158
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-8: Product: USB2.0-CRW
usb 1-8: Manufacturer: Generic
usb 1-8: SerialNumber: 20071114173400000
usb 1-8: configuration #1 chosen from 1 choice
[drm] Initialized drm 1.1.0 20060810
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
dracut: Starting plymouth daemon
ahci 0000:00:0b.0: version 3.0
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22
  alloc irq_desc for 24 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:0b.0: irq 24 for MSI/MSI-X
ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part
ahci 0000:00:0b.0: setting latency timer to 64
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 24
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 24
ata3: SATA max UDMA/133 abar m8192@0xfae7c000 port 0xfae7c200 irq 24
ata4: SATA max UDMA/133 abar m8192@0xfae7c000 port 0xfae7c280 irq 24
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: SAMSUNG HN-M500MBB, 2AR10001, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HN-M500M 2AR1 PQ: 0 ANSI: 5
ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633C, CH01, max UDMA/100, ATAPI AN
ata2.00: applying bridge limits
ata2.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633C  CH01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
usb-storage: device scan complete
scsi 0:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: [sdb] Attached SCSI removable disk
Finger Sensing Pad, hw: 12.1.1, sw: 1.0.0-K, buttons: 4
input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio2/input/input7
dracut: Scanning devices sda2  for LVM logical volumes vg_master/lv_swap vg_master/lv_root
dracut: inactive '/dev/vg_master/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_master/lv_home' [411.83 GiB] inherit
dracut: inactive '/dev/vg_master/lv_swap' [3.44 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_master-lv_root
dracut: Loading SELinux policy
type=1404 audit(1373817683.249:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 278017 rules.
SELinux: 2048 avtab hash slots, 278017 rules.
SELinux:  9 users, 12 roles, 3900 types, 205 bools, 1 sens, 1024 cats
SELinux:  81 classes, 278017 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1373817684.590:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
i2c i2c-0: nForce2 SMBus adapter at 0x4d00
i2c i2c-1: nForce2 SMBus adapter at 0x4e00
snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
snd_hda_intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
hda_intel: Disabling MSI
snd_hda_intel 0000:00:08.0: setting latency timer to 64
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.0/sound/card0/input8
input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input9
input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input10
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 1:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
sd 0:0:0:0: Attached scsi generic sg2 type 0
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB2.0 1.3M UVC WebCam  (04f2:b012)
input: USB2.0 1.3M UVC WebCam  as /devices/pci0000:00/0000:00:04.1/usb1/1-7/1-7:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
cfg80211: Calling CRDA to update world regulatory domain
ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 19
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
ath9k 0000:06:00.0: PCI INT A -> Link[LN4A] -> GSI 19 (level, low) -> IRQ 19
ath9k 0000:06:00.0: setting latency timer to 64
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90003440000, irq=19
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ACPI: PCI Interrupt Link [LN5A] enabled at IRQ 18
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
r8169 0000:07:00.0: PCI INT A -> Link[LN5A] -> GSI 18 (level, low) -> IRQ 18
r8169 0000:07:00.0: setting latency timer to 64
  alloc irq_desc for 25 on node -1
  alloc kstat_irqs on node -1
r8169 0000:07:00.0: irq 25 for MSI/MSI-X
r8169 0000:07:00.0: eth0: RTL8102e at 0xffffc90000654000, 70:71:bc:80:a2:e8, XID 04a00000 IRQ 25
asus_laptop: Asus Laptop Support version 0.42
asus_laptop:   T68D model detected
input: Asus Laptop extra buttons as /devices/virtual/input/input12
asus_laptop: Brightness ignored, must be controlled by ACPI video driver
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 3604472k swap on /dev/mapper/vg_master-lv_swap.  Priority:-1 extents:1 across:3604472k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
r8169 0000:07:00.0: eth0: link down
r8169 0000:07:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:07:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
eth0: no IPv6 routers present
tap0: no IPv6 routers present
usb 1-4: new high speed USB device number 4 using ehci_hcd
usb 1-4: New USB device found, idVendor=0409, idProduct=005a
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb 1-4.1: new full speed USB device number 5 using ehci_hcd
usb 1-4.1: not running at top speed; connect to a high speed hub
usb 1-4.1: New USB device found, idVendor=0403, idProduct=6011
usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.1: Product: Quad RS232-HS
usb 1-4.1: Manufacturer: FTDI
usb 1-4.1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for FTDI USB Serial Device
ftdi_sio 1-4.1:1.0: FTDI USB Serial Device converter detected
usb 1-4.1: Detected FT4232H
usb 1-4.1: Number of endpoints 2
usb 1-4.1: Endpoint 1 MaxPacketSize 64
usb 1-4.1: Endpoint 2 MaxPacketSize 64
usb 1-4.1: Setting MaxPacketSize 64
usb 1-4.1: FTDI USB Serial Device converter now attached to ttyUSB0
ftdi_sio 1-4.1:1.1: FTDI USB Serial Device converter detected
usb 1-4.1: Detected FT4232H
usb 1-4.1: Number of endpoints 2
usb 1-4.1: Endpoint 1 MaxPacketSize 64
usb 1-4.1: Endpoint 2 MaxPacketSize 64
usb 1-4.1: Setting MaxPacketSize 64
usb 1-4.1: FTDI USB Serial Device converter now attached to ttyUSB1
ftdi_sio 1-4.1:1.2: FTDI USB Serial Device converter detected
usb 1-4.1: Detected FT4232H
usb 1-4.1: Number of endpoints 2
usb 1-4.1: Endpoint 1 MaxPacketSize 64
usb 1-4.1: Endpoint 2 MaxPacketSize 64
usb 1-4.1: Setting MaxPacketSize 64
usb 1-4.1: FTDI USB Serial Device converter now attached to ttyUSB2
ftdi_sio 1-4.1:1.3: FTDI USB Serial Device converter detected
usb 1-4.1: Detected FT4232H
usb 1-4.1: Number of endpoints 2
usb 1-4.1: Endpoint 1 MaxPacketSize 64
usb 1-4.1: Endpoint 2 MaxPacketSize 64
usb 1-4.1: Setting MaxPacketSize 64
usb 1-4.1: FTDI USB Serial Device converter now attached to ttyUSB3
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
usb 1-4.2: new high speed USB device number 6 using ehci_hcd
usb 1-4.2: New USB device found, idVendor=0403, idProduct=6011
usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.2: Product: Quad RS232-HS
usb 1-4.2: Manufacturer: FTDI
usb 1-4.2: configuration #1 chosen from 1 choice
ftdi_sio 1-4.2:1.0: FTDI USB Serial Device converter detected
usb 1-4.2: Detected FT4232H
usb 1-4.2: Number of endpoints 2
usb 1-4.2: Endpoint 1 MaxPacketSize 512
usb 1-4.2: Endpoint 2 MaxPacketSize 512
usb 1-4.2: Setting MaxPacketSize 512
usb 1-4.2: FTDI USB Serial Device converter now attached to ttyUSB4
ftdi_sio 1-4.2:1.1: FTDI USB Serial Device converter detected
usb 1-4.2: Detected FT4232H
usb 1-4.2: Number of endpoints 2
usb 1-4.2: Endpoint 1 MaxPacketSize 512
usb 1-4.2: Endpoint 2 MaxPacketSize 512
usb 1-4.2: Setting MaxPacketSize 512
usb 1-4.2: FTDI USB Serial Device converter now attached to ttyUSB5
ftdi_sio 1-4.2:1.2: FTDI USB Serial Device converter detected
usb 1-4.2: Detected FT4232H
usb 1-4.2: Number of endpoints 2
usb 1-4.2: Endpoint 1 MaxPacketSize 512
usb 1-4.2: Endpoint 2 MaxPacketSize 512
usb 1-4.2: Setting MaxPacketSize 512
usb 1-4.2: FTDI USB Serial Device converter now attached to ttyUSB6
ftdi_sio 1-4.2:1.3: FTDI USB Serial Device converter detected
usb 1-4.2: Detected FT4232H
usb 1-4.2: Number of endpoints 2
usb 1-4.2: Endpoint 1 MaxPacketSize 512
usb 1-4.2: Endpoint 2 MaxPacketSize 512
usb 1-4.2: Setting MaxPacketSize 512
usb 1-4.2: FTDI USB Serial Device converter now attached to ttyUSB7
usb 1-4.3: new high speed USB device number 7 using ehci_hcd
usb 1-4.3: New USB device found, idVendor=0403, idProduct=6011
usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.3: Product: Quad RS232-HS
usb 1-4.3: Manufacturer: FTDI
usb 1-4.3: configuration #1 chosen from 1 choice
ftdi_sio 1-4.3:1.0: FTDI USB Serial Device converter detected
usb 1-4.3: Detected FT4232H
usb 1-4.3: Number of endpoints 2
usb 1-4.3: Endpoint 1 MaxPacketSize 512
usb 1-4.3: Endpoint 2 MaxPacketSize 512
usb 1-4.3: Setting MaxPacketSize 512
usb 1-4.3: FTDI USB Serial Device converter now attached to ttyUSB8
ftdi_sio 1-4.3:1.1: FTDI USB Serial Device converter detected
usb 1-4.3: Detected FT4232H
usb 1-4.3: Number of endpoints 2
usb 1-4.3: Endpoint 1 MaxPacketSize 512
usb 1-4.3: Endpoint 2 MaxPacketSize 512
usb 1-4.3: Setting MaxPacketSize 512
usb 1-4.3: FTDI USB Serial Device converter now attached to ttyUSB9
ftdi_sio 1-4.3:1.2: FTDI USB Serial Device converter detected
usb 1-4.3: Detected FT4232H
usb 1-4.3: Number of endpoints 2
usb 1-4.3: Endpoint 1 MaxPacketSize 512
usb 1-4.3: Endpoint 2 MaxPacketSize 512
usb 1-4.3: Setting MaxPacketSize 512
usb 1-4.3: FTDI USB Serial Device converter now attached to ttyUSB10
ftdi_sio 1-4.3:1.3: FTDI USB Serial Device converter detected
usb 1-4.3: Detected FT4232H
usb 1-4.3: Number of endpoints 2
usb 1-4.3: Endpoint 1 MaxPacketSize 512
usb 1-4.3: Endpoint 2 MaxPacketSize 512
usb 1-4.3: Setting MaxPacketSize 512
usb 1-4.3: FTDI USB Serial Device converter now attached to ttyUSB11
usb 1-4.4: new high speed USB device number 8 using ehci_hcd
usb 1-4.4: New USB device found, idVendor=0403, idProduct=6011
usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.4: Product: Quad RS232-HS
usb 1-4.4: Manufacturer: FTDI
usb 1-4.4: configuration #1 chosen from 1 choice
ftdi_sio 1-4.4:1.0: FTDI USB Serial Device converter detected
usb 1-4.4: Detected FT4232H
usb 1-4.4: Number of endpoints 2
usb 1-4.4: Endpoint 1 MaxPacketSize 512
usb 1-4.4: Endpoint 2 MaxPacketSize 512
usb 1-4.4: Setting MaxPacketSize 512
usb 1-4.4: FTDI USB Serial Device converter now attached to ttyUSB12
ftdi_sio 1-4.4:1.1: FTDI USB Serial Device converter detected
usb 1-4.4: Detected FT4232H
usb 1-4.4: Number of endpoints 2
usb 1-4.4: Endpoint 1 MaxPacketSize 512
usb 1-4.4: Endpoint 2 MaxPacketSize 512
usb 1-4.4: Setting MaxPacketSize 512
usb 1-4.4: FTDI USB Serial Device converter now attached to ttyUSB13
ftdi_sio 1-4.4:1.2: FTDI USB Serial Device converter detected
usb 1-4.4: Detected FT4232H
usb 1-4.4: Number of endpoints 2
usb 1-4.4: Endpoint 1 MaxPacketSize 512
usb 1-4.4: Endpoint 2 MaxPacketSize 512
usb 1-4.4: Setting MaxPacketSize 512
usb 1-4.4: FTDI USB Serial Device converter now attached to ttyUSB14
ftdi_sio 1-4.4:1.3: FTDI USB Serial Device converter detected
usb 1-4.4: Detected FT4232H
usb 1-4.4: Number of endpoints 2
usb 1-4.4: Endpoint 1 MaxPacketSize 512
usb 1-4.4: Endpoint 2 MaxPacketSize 512
usb 1-4.4: Setting MaxPacketSize 512
usb 1-4.4: FTDI USB Serial Device converter now attached to ttyUSB15