Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.0.0-13-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #22-Ubuntu SMP Wed Nov 2 13:27:26 UTC 2011 (Ubuntu 3.0.0-13.22-generic 3.0.6)
- [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.0-13-generic root=/dev/mapper/twister-root ro quiet splash vt.handoff=7
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff90000 (usable)
- [ 0.000000] BIOS-e820: 00000000bff90000 - 00000000bff9e000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 0000000200000000 (usable)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] DMI: System manufacturer System Product Name/P5B-Deluxe, BIOS 1238 09/30/2008
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] No AGP bridge found
- [ 0.000000] last_pfn = 0x200000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-DFFFF uncachable
- [ 0.000000] E0000-EFFFF write-through
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0CF000000 mask FFF000000 uncachable
- [ 0.000000] 1 base 0D0000000 mask FF0000000 uncachable
- [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
- [ 0.000000] 3 base 000000000 mask E00000000 write-back
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] original variable MTRRs
- [ 0.000000] reg 0, base: 3312MB, range: 16MB, type UC
- [ 0.000000] reg 1, base: 3328MB, range: 256MB, type UC
- [ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
- [ 0.000000] reg 3, base: 0GB, range: 8GB, type WB
- [ 0.000000] total RAM covered: 7408M
- [ 0.000000] Found optimal setting for mtrr clean up
- [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 5 lose cover RAM: 0G
- [ 0.000000] New variable MTRRs
- [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
- [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
- [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
- [ 0.000000] reg 3, base: 3312MB, range: 16MB, type UC
- [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
- [ 0.000000] e820 update range: 00000000cf000000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0xbff90 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000bff90000
- [ 0.000000] 0000000000 - 00bfe00000 page 2M
- [ 0.000000] 00bfe00000 - 00bff90000 page 4k
- [ 0.000000] kernel direct mapping tables up to bff90000 @ bff8b000-bff90000
- [ 0.000000] init_memory_mapping: 0000000100000000-0000000200000000
- [ 0.000000] 0100000000 - 0200000000 page 2M
- [ 0.000000] kernel direct mapping tables up to 200000000 @ 1ffff7000-200000000
- [ 0.000000] RAMDISK: 358de000 - 36c67000
- [ 0.000000] ACPI: RSDP 00000000000fae70 00014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT 00000000bff90000 00038 (v01 MSTEST TESTONLY 09000830 MSFT 00000097)
- [ 0.000000] ACPI: FACP 00000000bff90200 00084 (v02 MSTEST OEMFACP 09000830 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 00000000bff905c0 0918E (v01 A0483 A0483035 00000035 INTL 20060113)
- [ 0.000000] ACPI: FACS 00000000bff9e000 00040
- [ 0.000000] ACPI: APIC 00000000bff90390 0006C (v01 MSTEST OEMAPIC 09000830 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 00000000bff90400 0003C (v01 MSTEST OEMMCFG 09000830 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 00000000bff9e040 0007B (v01 MSTEST AMI_OEM 09000830 MSFT 00000097)
- [ 0.000000] ACPI: HPET 00000000bff99750 00038 (v01 MSTEST OEMHPET 09000830 MSFT 00000097)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at 0000000000000000-0000000200000000
- [ 0.000000] Initmem setup node 0 0000000000000000-0000000200000000
- [ 0.000000] NODE_DATA [00000001ffffb000 - 00000001ffffffff]
- [ 0.000000] [ffffea0000000000-ffffea0006ffffff] PMD -> [ffff8801f8600000-ffff8801fe7fffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal 0x00100000 -> 0x00200000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[3] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x000bff90
- [ 0.000000] 0: 0x00100000 -> 0x00200000
- [ 0.000000] On node 0 totalpages: 1834783
- [ 0.000000] DMA zone: 56 pages used for memmap
- [ 0.000000] DMA zone: 5 pages reserved
- [ 0.000000] DMA zone: 3922 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 14280 pages used for memmap
- [ 0.000000] DMA32 zone: 767944 pages, LIFO batch:31
- [ 0.000000] Normal zone: 14336 pages used for memmap
- [ 0.000000] Normal zone: 1034240 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000
- [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
- [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 00000000bff90000 - 00000000bff9e000
- [ 0.000000] PM: Registered nosave memory: 00000000bff9e000 - 00000000bffe0000
- [ 0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000
- [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
- [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
- [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
- [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
- [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8801ffc00000 s79616 r8192 d22784 u524288
- [ 0.000000] pcpu-alloc: s79616 r8192 d22784 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1806106
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0-13-generic root=/dev/mapper/twister-root ro quiet splash vt.handoff=7
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 7138712k/8388608k available (6105k kernel code, 1049476k absent, 200420k reserved, 4879k data, 984k init)
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:16640 nr_irqs:712 16
- [ 0.000000] vt handoff: transparent VT on vt#7
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] allocated 58720256 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2400.272 MHz processor.
- [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.54 BogoMIPS (lpj=9601088)
- [ 0.004008] pid_max: default: 32768 minimum: 301
- [ 0.004036] Security Framework initialized
- [ 0.004052] AppArmor: AppArmor initialized
- [ 0.004054] Yama: becoming mindful.
- [ 0.004871] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.010266] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.011887] Mount-cache hash table entries: 256
- [ 0.012062] Initializing cgroup subsys cpuacct
- [ 0.012069] Initializing cgroup subsys memory
- [ 0.012078] Initializing cgroup subsys devices
- [ 0.012080] Initializing cgroup subsys freezer
- [ 0.012082] Initializing cgroup subsys net_cls
- [ 0.012084] Initializing cgroup subsys blkio
- [ 0.012091] Initializing cgroup subsys perf_event
- [ 0.012120] CPU: Physical Processor ID: 0
- [ 0.012122] CPU: Processor Core ID: 0
- [ 0.012125] mce: CPU supports 6 MCE banks
- [ 0.012133] CPU0: Thermal monitoring enabled (TM2)
- [ 0.012137] using mwait in idle threads.
- [ 0.014403] ACPI: Core revision 20110413
- [ 0.020031] ftrace: allocating 25656 entries in 101 pages
- [ 0.024347] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.067144] CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
- [ 0.068003] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
- [ 0.068003] PEBS disabled due to CPU errata.
- [ 0.068003] ... version: 2
- [ 0.068003] ... bit width: 40
- [ 0.068003] ... generic registers: 2
- [ 0.068003] ... value mask: 000000ffffffffff
- [ 0.068003] ... max period: 000000007fffffff
- [ 0.068003] ... fixed-purpose events: 3
- [ 0.068003] ... event mask: 0000000700000003
- [ 0.068003] Booting Node 0, Processors #1
- [ 0.068003] smpboot cpu 1: start_ip = 9a000
- [ 0.156025] Brought up 2 CPUs
- [ 0.156029] Total of 2 processors activated (9600.57 BogoMIPS).
- [ 0.157235] devtmpfs: initialized
- [ 0.157235] PM: Registering ACPI NVS region at bff9e000 (270336 bytes)
- [ 0.157318] print_constraints: dummy:
- [ 0.157341] Time: 20:25:44 Date: 11/30/11
- [ 0.157376] NET: Registered protocol family 16
- [ 0.157404] Trying to unpack rootfs image as initramfs...
- [ 0.157499] ACPI: bus type pci registered
- [ 0.157555] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.157557] PCI: not using MMCONFIG
- [ 0.157559] PCI: Using configuration type 1 for base access
- [ 0.158329] bio: create slab <bio-0> at 0
- [ 0.161178] ACPI: EC: Look up EC in DSDT
- [ 0.162432] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.166745] ACPI: SSDT 00000000bff9e0c0 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113)
- [ 0.167047] ACPI: Dynamic OEM Table Load:
- [ 0.167050] ACPI: SSDT (null) 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113)
- [ 0.167191] ACPI: SSDT 00000000bff9e290 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
- [ 0.167488] ACPI: Dynamic OEM Table Load:
- [ 0.167491] ACPI: SSDT (null) 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
- [ 0.167638] ACPI: Interpreter enabled
- [ 0.167641] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.167659] ACPI: Using IOAPIC for interrupt routing
- [ 0.167680] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.168097] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 0.215328] ACPI: No dock devices found.
- [ 0.215331] HEST: Table not found.
- [ 0.215334] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.215391] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.215510] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
- [ 0.215513] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
- [ 0.215515] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 0.215518] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
- [ 0.215520] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
- [ 0.215533] pci 0000:00:00.0: [8086:29a0] type 0 class 0x000600
- [ 0.215571] pci 0000:00:01.0: [8086:29a1] type 1 class 0x000604
- [ 0.215600] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.215603] pci 0000:00:01.0: PME# disabled
- [ 0.215637] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
- [ 0.215674] pci 0000:00:1a.0: reg 20: [io 0xa880-0xa89f]
- [ 0.215703] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
- [ 0.215740] pci 0000:00:1a.1: reg 20: [io 0xac00-0xac1f]
- [ 0.215776] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
- [ 0.215794] pci 0000:00:1a.7: reg 10: [mem 0xf8dffc00-0xf8dfffff]
- [ 0.215859] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
- [ 0.215863] pci 0000:00:1a.7: PME# disabled
- [ 0.215883] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
- [ 0.215897] pci 0000:00:1b.0: reg 10: [mem 0xf8df8000-0xf8dfbfff 64bit]
- [ 0.215948] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.215952] pci 0000:00:1b.0: PME# disabled
- [ 0.215970] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
- [ 0.216035] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.216038] pci 0000:00:1c.0: PME# disabled
- [ 0.216061] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
- [ 0.216111] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- [ 0.216115] pci 0000:00:1c.4: PME# disabled
- [ 0.216138] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
- [ 0.216189] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 0.216193] pci 0000:00:1c.5: PME# disabled
- [ 0.216212] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
- [ 0.216249] pci 0000:00:1d.0: reg 20: [io 0xa400-0xa41f]
- [ 0.216277] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
- [ 0.216314] pci 0000:00:1d.1: reg 20: [io 0xa480-0xa49f]
- [ 0.216342] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
- [ 0.216379] pci 0000:00:1d.2: reg 20: [io 0xa800-0xa81f]
- [ 0.216416] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
- [ 0.216434] pci 0000:00:1d.7: reg 10: [mem 0xf8dff800-0xf8dffbff]
- [ 0.216497] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.216501] pci 0000:00:1d.7: PME# disabled
- [ 0.216517] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
- [ 0.216570] pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601
- [ 0.216646] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
- [ 0.216680] pci 0000:00:1f.2: [8086:2820] type 0 class 0x000101
- [ 0.216693] pci 0000:00:1f.2: reg 10: [io 0x9400-0x9407]
- [ 0.216700] pci 0000:00:1f.2: reg 14: [io 0x9080-0x9083]
- [ 0.216707] pci 0000:00:1f.2: reg 18: [io 0x9000-0x9007]
- [ 0.216715] pci 0000:00:1f.2: reg 1c: [io 0x8c00-0x8c03]
- [ 0.216722] pci 0000:00:1f.2: reg 20: [io 0x8880-0x888f]
- [ 0.216730] pci 0000:00:1f.2: reg 24: [io 0x8800-0x880f]
- [ 0.216751] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.216754] pci 0000:00:1f.2: PME# disabled
- [ 0.216768] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
- [ 0.216779] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
- [ 0.216805] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
- [ 0.216833] pci 0000:00:1f.5: [8086:2825] type 0 class 0x000101
- [ 0.216845] pci 0000:00:1f.5: reg 10: [io 0xa080-0xa087]
- [ 0.216852] pci 0000:00:1f.5: reg 14: [io 0xa000-0xa003]
- [ 0.216860] pci 0000:00:1f.5: reg 18: [io 0x9c00-0x9c07]
- [ 0.216867] pci 0000:00:1f.5: reg 1c: [io 0x9880-0x9883]
- [ 0.216875] pci 0000:00:1f.5: reg 20: [io 0x9800-0x980f]
- [ 0.216882] pci 0000:00:1f.5: reg 24: [io 0x9480-0x948f]
- [ 0.216902] pci 0000:00:1f.5: PME# supported from D3hot
- [ 0.216906] pci 0000:00:1f.5: PME# disabled
- [ 0.216935] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.216939] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
- [ 0.216942] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- [ 0.216946] pci 0000:00:01.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
- [ 0.216995] pci 0000:04:00.0: [10de:0391] type 0 class 0x000300
- [ 0.217008] pci 0000:04:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
- [ 0.217022] pci 0000:04:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.217036] pci 0000:04:00.0: reg 1c: [mem 0xf9000000-0xf9ffffff 64bit]
- [ 0.217046] pci 0000:04:00.0: reg 24: [io 0xdc00-0xdc7f]
- [ 0.217056] pci 0000:04:00.0: reg 30: [mem 0xfbee0000-0xfbefffff pref]
- [ 0.217095] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.217104] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
- [ 0.217107] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
- [ 0.217111] pci 0000:00:1c.0: bridge window [mem 0xf9000000-0xfbefffff]
- [ 0.217116] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.217168] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
- [ 0.217253] pci 0000:03:00.0: reg 24: [mem 0xf8ffe000-0xf8ffffff]
- [ 0.217266] pci 0000:03:00.0: reg 30: [mem 0xf8fe0000-0xf8feffff pref]
- [ 0.217297] pci 0000:03:00.0: PME# supported from D3hot
- [ 0.217302] pci 0000:03:00.0: PME# disabled
- [ 0.217331] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
- [ 0.217354] pci 0000:03:00.1: reg 10: [io 0xcc00-0xcc07]
- [ 0.217367] pci 0000:03:00.1: reg 14: [io 0xc880-0xc883]
- [ 0.217381] pci 0000:03:00.1: reg 18: [io 0xc800-0xc807]
- [ 0.217394] pci 0000:03:00.1: reg 1c: [io 0xc480-0xc483]
- [ 0.217407] pci 0000:03:00.1: reg 20: [io 0xc400-0xc40f]
- [ 0.217475] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.217487] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
- [ 0.217491] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
- [ 0.217495] pci 0000:00:1c.4: bridge window [mem 0xf8f00000-0xf8ffffff]
- [ 0.217500] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.217560] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
- [ 0.217582] pci 0000:02:00.0: reg 10: [mem 0xf8efc000-0xf8efffff 64bit]
- [ 0.217594] pci 0000:02:00.0: reg 18: [io 0xb800-0xb8ff]
- [ 0.217635] pci 0000:02:00.0: reg 30: [mem 0xf8ec0000-0xf8edffff pref]
- [ 0.217672] pci 0000:02:00.0: supports D1 D2
- [ 0.217674] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.217679] pci 0000:02:00.0: PME# disabled
- [ 0.224034] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
- [ 0.224038] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
- [ 0.224042] pci 0000:00:1c.5: bridge window [mem 0xf8e00000-0xf8efffff]
- [ 0.224048] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.224080] pci 0000:05:00.0: [1131:7134] type 0 class 0x000480
- [ 0.224096] pci 0000:05:00.0: reg 10: [mem 0xfbfffc00-0xfbffffff]
- [ 0.224160] pci 0000:05:00.0: supports D1 D2
- [ 0.224179] pci 0000:05:03.0: [104c:8023] type 0 class 0x000c00
- [ 0.224196] pci 0000:05:03.0: reg 10: [mem 0xfbfff000-0xfbfff7ff]
- [ 0.224206] pci 0000:05:03.0: reg 14: [mem 0xfbff8000-0xfbffbfff]
- [ 0.224263] pci 0000:05:03.0: supports D1 D2
- [ 0.224265] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
- [ 0.224269] pci 0000:05:03.0: PME# disabled
- [ 0.224290] pci 0000:05:04.0: [11ab:4320] type 0 class 0x000200
- [ 0.224308] pci 0000:05:04.0: reg 10: [mem 0xfbff4000-0xfbff7fff]
- [ 0.224318] pci 0000:05:04.0: reg 14: [io 0xe800-0xe8ff]
- [ 0.224358] pci 0000:05:04.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref]
- [ 0.224380] pci 0000:05:04.0: supports D1 D2
- [ 0.224381] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.224385] pci 0000:05:04.0: PME# disabled
- [ 0.224425] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
- [ 0.224429] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
- [ 0.224433] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
- [ 0.224438] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.224441] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.224443] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.224446] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.224448] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
- [ 0.224451] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
- [ 0.224472] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.224564] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
- [ 0.224590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.224660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
- [ 0.224691] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
- [ 0.224725] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
- [ 0.224764] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.224767] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
- [ 0.224769] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 0.230821] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.230865] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.230908] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.230949] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
- [ 0.230990] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 0.231032] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
- [ 0.231072] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
- [ 0.231113] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
- [ 0.231225] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.231231] vgaarb: loaded
- [ 0.231232] vgaarb: bridge control possible 0000:04:00.0
- [ 0.231413] SCSI subsystem initialized
- [ 0.231474] libata version 3.00 loaded.
- [ 0.231516] usbcore: registered new interface driver usbfs
- [ 0.231525] usbcore: registered new interface driver hub
- [ 0.231551] usbcore: registered new device driver usb
- [ 0.231630] PCI: Using ACPI for IRQ routing
- [ 0.237161] PCI: pci_cache_line_size set to 64 bytes
- [ 0.237256] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
- [ 0.237259] reserve RAM buffer: 00000000bff90000 - 00000000bfffffff
- [ 0.237352] NetLabel: Initializing
- [ 0.237354] NetLabel: domain hash size = 128
- [ 0.237355] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.237366] NetLabel: unlabeled traffic allowed by default
- [ 0.237403] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.237407] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.237412] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- [ 0.240320] Switching to clocksource hpet
- [ 0.243373] Switched to NOHz mode on CPU #0
- [ 0.243466] Switched to NOHz mode on CPU #1
- [ 0.246463] AppArmor: AppArmor Filesystem Enabled
- [ 0.246496] pnp: PnP ACPI init
- [ 0.246512] ACPI: bus type pnp registered
- [ 0.246602] pnp 00:00: [bus 00-ff]
- [ 0.246608] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.246610] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.246612] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.246614] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.246616] pnp 00:00: [mem 0x000d0000-0x000dffff window]
- [ 0.246618] pnp 00:00: [mem 0xc0000000-0xffffffff window]
- [ 0.246682] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 0.246691] pnp 00:01: [mem 0xfed14000-0xfed19fff]
- [ 0.246742] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
- [ 0.246746] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.246776] pnp 00:02: [dma 4]
- [ 0.246778] pnp 00:02: [io 0x0000-0x000f]
- [ 0.246780] pnp 00:02: [io 0x0081-0x0083]
- [ 0.246781] pnp 00:02: [io 0x0087]
- [ 0.246783] pnp 00:02: [io 0x0089-0x008b]
- [ 0.246785] pnp 00:02: [io 0x008f]
- [ 0.246786] pnp 00:02: [io 0x00c0-0x00df]
- [ 0.246808] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.246821] pnp 00:03: [io 0x0070-0x0071]
- [ 0.246834] pnp 00:03: [irq 8]
- [ 0.246859] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.246867] pnp 00:04: [io 0x0061]
- [ 0.246892] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.246900] pnp 00:05: [io 0x00f0-0x00ff]
- [ 0.246906] pnp 00:05: [irq 13]
- [ 0.246927] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.247138] pnp 00:06: [irq 4]
- [ 0.247141] pnp 00:06: [dma 0 disabled]
- [ 0.247143] pnp 00:06: [io 0x03f8-0x03ff]
- [ 0.247201] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.247322] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.247325] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.247327] pnp 00:07: [io 0x0290-0x0297]
- [ 0.247371] system 00:07: [io 0x0290-0x0297] has been reserved
- [ 0.247375] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.247458] pnp 00:08: [io 0x0010-0x001f]
- [ 0.247460] pnp 00:08: [io 0x0022-0x003f]
- [ 0.247461] pnp 00:08: [io 0x0044-0x005f]
- [ 0.247463] pnp 00:08: [io 0x0062-0x0063]
- [ 0.247465] pnp 00:08: [io 0x0065-0x006f]
- [ 0.247466] pnp 00:08: [io 0x0072-0x007f]
- [ 0.247468] pnp 00:08: [io 0x0080]
- [ 0.247472] pnp 00:08: [io 0x0084-0x0086]
- [ 0.247474] pnp 00:08: [io 0x0088]
- [ 0.247476] pnp 00:08: [io 0x008c-0x008e]
- [ 0.247478] pnp 00:08: [io 0x0090-0x009f]
- [ 0.247479] pnp 00:08: [io 0x00a2-0x00bf]
- [ 0.247481] pnp 00:08: [io 0x00e0-0x00ef]
- [ 0.247482] pnp 00:08: [io 0x04d0-0x04d1]
- [ 0.247484] pnp 00:08: [io 0x0800-0x087f]
- [ 0.247486] pnp 00:08: [io 0x0400-0x03ff disabled]
- [ 0.247488] pnp 00:08: [io 0x0480-0x04bf]
- [ 0.247489] pnp 00:08: [mem 0xffafe000-0xffb0cbff]
- [ 0.247491] pnp 00:08: [mem 0xffb00000-0xffbfffff]
- [ 0.247493] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
- [ 0.247495] pnp 00:08: [mem 0xfed20000-0xfed8ffff]
- [ 0.247497] pnp 00:08: [mem 0xfff00000-0xfffffffe]
- [ 0.247498] pnp 00:08: [mem 0xfebfe000-0xfebfec00]
- [ 0.247566] system 00:08: [io 0x04d0-0x04d1] has been reserved
- [ 0.247569] system 00:08: [io 0x0800-0x087f] has been reserved
- [ 0.247571] system 00:08: [io 0x0480-0x04bf] has been reserved
- [ 0.247574] system 00:08: [mem 0xffafe000-0xffb0cbff] could not be reserved
- [ 0.247577] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
- [ 0.247579] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.247582] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
- [ 0.247584] system 00:08: [mem 0xfff00000-0xfffffffe] has been reserved
- [ 0.247587] system 00:08: [mem 0xfebfe000-0xfebfec00] has been reserved
- [ 0.247590] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.247648] pnp 00:09: [mem 0xfed00000-0xfed003ff]
- [ 0.247673] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.247713] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
- [ 0.247715] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
- [ 0.247758] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.247761] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.247764] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.247790] pnp 00:0b: [io 0x0060]
- [ 0.247791] pnp 00:0b: [io 0x0064]
- [ 0.247797] pnp 00:0b: [irq 1]
- [ 0.247826] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- [ 0.247869] pnp 00:0c: [mem 0xe0000000-0xefffffff]
- [ 0.247913] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.247917] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.248083] pnp 00:0d: [mem 0x00000000-0x0009ffff]
- [ 0.248085] pnp 00:0d: [mem 0x000c0000-0x000cffff]
- [ 0.248087] pnp 00:0d: [mem 0x000e0000-0x000fffff]
- [ 0.248089] pnp 00:0d: [mem 0x00100000-0xbfffffff]
- [ 0.248091] pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 0.248148] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.248151] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
- [ 0.248153] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
- [ 0.248156] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
- [ 0.248159] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.248268] pnp: PnP ACPI: found 14 devices
- [ 0.248270] ACPI: ACPI bus type pnp unregistered
- [ 0.254161] PCI: max bus depth: 1 pci_try_num: 2
- [ 0.254202] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff]
- [ 0.254207] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0000000-0xc00000ff] (PCI address [0xc0000000-0xc00000ff])
- [ 0.254211] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0100000-0xc02fffff 64bit pref]
- [ 0.254214] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0300000-0xc04fffff 64bit pref]
- [ 0.254217] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.254219] pci 0000:00:01.0: bridge window [io disabled]
- [ 0.254222] pci 0000:00:01.0: bridge window [mem disabled]
- [ 0.254225] pci 0000:00:01.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
- [ 0.254229] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
- [ 0.254232] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
- [ 0.254237] pci 0000:00:1c.0: bridge window [mem 0xf9000000-0xfbefffff]
- [ 0.254240] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.254246] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
- [ 0.254249] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
- [ 0.254253] pci 0000:00:1c.4: bridge window [mem 0xf8f00000-0xf8ffffff]
- [ 0.254257] pci 0000:00:1c.4: bridge window [mem 0xc0300000-0xc04fffff 64bit pref]
- [ 0.254263] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
- [ 0.254265] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
- [ 0.254270] pci 0000:00:1c.5: bridge window [mem 0xf8e00000-0xf8efffff]
- [ 0.254273] pci 0000:00:1c.5: bridge window [mem 0xc0100000-0xc02fffff 64bit pref]
- [ 0.254279] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
- [ 0.254281] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
- [ 0.254286] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
- [ 0.254289] pci 0000:00:1e.0: bridge window [mem pref disabled]
- [ 0.254309] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.254313] pci 0000:00:01.0: setting latency timer to 64
- [ 0.254319] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.254323] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.254328] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.254332] pci 0000:00:1c.4: setting latency timer to 64
- [ 0.254340] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.254344] pci 0000:00:1c.5: setting latency timer to 64
- [ 0.254350] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.254354] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.254356] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.254358] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.254360] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
- [ 0.254362] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffffffff]
- [ 0.254365] pci_bus 0000:01: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
- [ 0.254367] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
- [ 0.254369] pci_bus 0000:04: resource 1 [mem 0xf9000000-0xfbefffff]
- [ 0.254371] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.254374] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
- [ 0.254376] pci_bus 0000:03: resource 1 [mem 0xf8f00000-0xf8ffffff]
- [ 0.254378] pci_bus 0000:03: resource 2 [mem 0xc0300000-0xc04fffff 64bit pref]
- [ 0.254380] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
- [ 0.254382] pci_bus 0000:02: resource 1 [mem 0xf8e00000-0xf8efffff]
- [ 0.254385] pci_bus 0000:02: resource 2 [mem 0xc0100000-0xc02fffff 64bit pref]
- [ 0.254387] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
- [ 0.254389] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff]
- [ 0.254391] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
- [ 0.254393] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
- [ 0.254395] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.254397] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
- [ 0.254399] pci_bus 0000:05: resource 8 [mem 0xc0000000-0xffffffff]
- [ 0.254436] NET: Registered protocol family 2
- [ 0.254674] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.256112] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- [ 0.259546] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.259990] TCP: Hash tables configured (established 524288 bind 65536)
- [ 0.259993] TCP reno registered
- [ 0.260045] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.260110] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.260281] NET: Registered protocol family 1
- [ 0.421979] pci 0000:04:00.0: Boot video device
- [ 0.421999] PCI: CLS 32 bytes, default 64
- [ 0.422002] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.422004] Placing 64MB software IO TLB between ffff8800bbf8b000 - ffff8800bff8b000
- [ 0.422006] software IO TLB at phys 0xbbf8b000 - 0xbff8b000
- [ 0.422303] audit: initializing netlink socket (disabled)
- [ 0.422314] type=2000 audit(1322684744.420:1): initialized
- [ 0.457735] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.491990] VFS: Disk quotas dquot_6.5.2
- [ 0.492054] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.492606] fuse init (API version 7.16)
- [ 0.492682] msgmni has been set to 13942
- [ 0.492975] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.493004] io scheduler noop registered
- [ 0.493006] io scheduler deadline registered
- [ 0.493042] io scheduler cfq registered (default)
- [ 0.493146] pcieport 0000:00:01.0: setting latency timer to 64
- [ 0.493176] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
- [ 0.493217] pcieport 0000:00:1c.0: setting latency timer to 64
- [ 0.493250] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
- [ 0.493300] pcieport 0000:00:1c.4: setting latency timer to 64
- [ 0.493334] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
- [ 0.493386] pcieport 0000:00:1c.5: setting latency timer to 64
- [ 0.493419] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
- [ 0.493486] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.493507] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.493547] intel_idle: MWAIT substates: 0x20
- [ 0.493549] intel_idle: does not run on family 6 model 15
- [ 0.493628] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 0.493633] ACPI: Power Button [PWRB]
- [ 0.493669] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.493673] ACPI: Power Button [PWRF]
- [ 0.493700] ACPI: acpi_idle registered with cpuidle
- [ 0.495237] ERST: Table is not found!
- [ 0.495293] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 0.515639] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.562903] Freeing initrd memory: 20004k freed
- [ 0.621299] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.621601] Linux agpgart interface v0.103
- [ 0.622723] brd: module loaded
- [ 0.623184] loop: module loaded
- [ 0.623306] ata_piix 0000:00:1f.2: version 2.13
- [ 0.623327] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.623332] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- [ 0.623373] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 0.623635] scsi0 : ata_piix
- [ 0.623713] scsi1 : ata_piix
- [ 0.624858] ata1: SATA max UDMA/133 cmd 0x9400 ctl 0x9080 bmdma 0x8880 irq 19
- [ 0.624862] ata2: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8888 irq 19
- [ 0.624882] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.624887] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
- [ 0.624927] ata_piix 0000:00:1f.5: setting latency timer to 64
- [ 0.625104] scsi2 : ata_piix
- [ 0.625166] scsi3 : ata_piix
- [ 0.625976] ata3: SATA max UDMA/133 cmd 0xa080 ctl 0xa000 bmdma 0x9800 irq 19
- [ 0.625980] ata4: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9808 irq 19
- [ 0.626040] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
- [ 0.626046] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.626073] pata_acpi 0000:03:00.1: setting latency timer to 64
- [ 0.626086] pata_acpi 0000:03:00.1: PCI INT B disabled
- [ 0.626340] Fixed MDIO Bus: probed
- [ 0.626361] PPP generic driver version 2.4.2
- [ 0.626397] tun: Universal TUN/TAP device driver, 1.6
- [ 0.626399] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.626469] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.626486] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.626506] ehci_hcd 0000:00:1a.7: setting latency timer to 64
- [ 0.626509] ehci_hcd 0000:00:1a.7: EHCI Host Controller
- [ 0.626546] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- [ 0.626574] ehci_hcd 0000:00:1a.7: debug port 1
- [ 0.630467] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
- [ 0.630481] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8dffc00
- [ 0.644034] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- [ 0.644171] hub 1-0:1.0: USB hub found
- [ 0.644177] hub 1-0:1.0: 4 ports detected
- [ 0.644273] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.644282] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 0.644286] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 0.644315] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 0.644339] ehci_hcd 0000:00:1d.7: debug port 1
- [ 0.648234] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 0.648246] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8dff800
- [ 0.664033] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 0.664158] hub 2-0:1.0: USB hub found
- [ 0.664164] hub 2-0:1.0: 6 ports detected
- [ 0.664260] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.664274] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.664293] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.664299] uhci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 0.664302] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 0.664330] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- [ 0.664360] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a880
- [ 0.664461] hub 3-0:1.0: USB hub found
- [ 0.664465] hub 3-0:1.0: 2 ports detected
- [ 0.664517] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.664522] uhci_hcd 0000:00:1a.1: setting latency timer to 64
- [ 0.664525] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 0.664556] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- [ 0.664585] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ac00
- [ 0.664686] hub 4-0:1.0: USB hub found
- [ 0.664690] hub 4-0:1.0: 2 ports detected
- [ 0.664746] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.664751] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 0.664754] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 0.664786] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
- [ 0.664807] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a400
- [ 0.664903] hub 5-0:1.0: USB hub found
- [ 0.664907] hub 5-0:1.0: 2 ports detected
- [ 0.664960] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.664965] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 0.664968] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 0.664997] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
- [ 0.665018] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a480
- [ 0.665114] hub 6-0:1.0: USB hub found
- [ 0.665118] hub 6-0:1.0: 2 ports detected
- [ 0.665175] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.665180] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 0.665183] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 0.665210] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
- [ 0.665231] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a800
- [ 0.665330] hub 7-0:1.0: USB hub found
- [ 0.665334] hub 7-0:1.0: 2 ports detected
- [ 0.665422] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- [ 0.665424] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- [ 0.666203] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.666283] mousedev: PS/2 mouse device common for all mice
- [ 0.666387] rtc_cmos 00:03: RTC can wake from S4
- [ 0.666467] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 0.666490] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 0.666573] device-mapper: uevent: version 1.0.3
- [ 0.666641] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- [ 0.666648] cpuidle: using governor ladder
- [ 0.666649] cpuidle: using governor menu
- [ 0.666651] EFI Variables Facility v0.08 2004-May-17
- [ 0.666878] TCP cubic registered
- [ 0.666989] NET: Registered protocol family 10
- [ 0.667419] NET: Registered protocol family 17
- [ 0.667433] Registering the dns_resolver key type
- [ 0.667514] PM: Hibernation image not present or could not be loaded.
- [ 0.667531] registered taskstats version 1
- [ 0.689083] Magic number: 3:782:448
- [ 0.689178] rtc_cmos 00:03: setting system clock to 2011-11-30 20:25:45 UTC (1322684745)
- [ 0.689563] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.689565] EDD information not available.
- [ 0.697737] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
- [ 1.100064] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.100222] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.108147] ata4.00: ATAPI: TSSTcorpCD/DVDW SH-S183A, SB02, max UDMA/33
- [ 1.108152] ata4.00: applying bridge limits
- [ 1.124147] ata4.00: configured for UDMA/33
- [ 1.124358] ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
- [ 1.124362] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.132245] ata3.00: configured for UDMA/133
- [ 1.160035] usb 5-2: new low speed USB device number 2 using uhci_hcd
- [ 1.420122] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.420134] ata1.01: SATA link down (SStatus 0 SControl 300)
- [ 1.420248] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.420260] ata2.01: SATA link down (SStatus 0 SControl 300)
- [ 1.420325] Refined TSC clocksource calibration: 2399.999 MHz.
- [ 1.420329] Switching to clocksource tsc
- [ 1.428363] ata1.00: ATA-7: SAMSUNG HD401LJ, ZZ100-15, max UDMA7
- [ 1.428367] ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.436263] ata1.00: configured for UDMA/133
- [ 1.436360] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD401LJ ZZ10 PQ: 0 ANSI: 5
- [ 1.436457] sd 0:0:0:0: [sda] 781422768 512-byte logical blocks: (400 GB/372 GiB)
- [ 1.436469] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.436506] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.436509] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.436541] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.444264] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
- [ 1.444268] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.452132] sda: sda1 sda2 < sda5 >
- [ 1.452245] ata2.00: configured for UDMA/133
- [ 1.452319] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
- [ 1.452403] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.452424] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 1.452430] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 1.452479] sd 1:0:0:0: [sdb] Write Protect is off
- [ 1.452482] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 1.452504] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.452509] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
- [ 1.452621] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 1.452673] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 1.452717] sd 2:0:0:0: [sdc] Write Protect is off
- [ 1.452720] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 1.452740] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.453548] scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183A SB02 PQ: 0 ANSI: 5
- [ 1.456880] sdb: sdb1
- [ 1.457134] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 1.458734] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.458738] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.458838] sr 3:0:0:0: Attached scsi CD-ROM sr0
- [ 1.458901] sr 3:0:0:0: Attached scsi generic sg3 type 5
- [ 1.476097] sdc: sdc1
- [ 1.476354] sd 2:0:0:0: [sdc] Attached SCSI disk
- [ 1.477963] Freeing unused kernel memory: 984k freed
- [ 1.478181] Write protecting the kernel read-only data: 10240k
- [ 1.478355] Freeing unused kernel memory: 20k freed
- [ 1.482775] Freeing unused kernel memory: 1396k freed
- [ 1.498389] udevd[91]: starting version 173
- [ 1.553568] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 1.553602] pata_jmicron 0000:03:00.1: setting latency timer to 64
- [ 1.562181] sky2: driver version 1.28
- [ 1.562212] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 1.562224] sky2 0000:02:00.0: setting latency timer to 64
- [ 1.562250] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
- [ 1.562341] sky2 0000:02:00.0: irq 44 for MSI/MSI-X
- [ 1.565363] wmi: Mapper loaded
- [ 1.565511] scsi4 : pata_jmicron
- [ 1.569816] scsi5 : pata_jmicron
- [ 1.569946] sky2 0000:02:00.0: eth0: addr 00:1b:fc:02:18:16
- [ 1.570282] ata5: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17
- [ 1.570285] ata6: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17
- [ 1.575790] skge 0000:05:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 1.575833] skge: 1.13 addr 0xfbff4000 irq 19 chip Yukon-Lite rev 9
- [ 1.579121] ahci 0000:03:00.0: version 3.0
- [ 1.579136] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.580720] [drm] Initialized drm 1.1.0 20060810
- [ 1.581704] skge 0000:05:04.0: eth1: addr 00:1b:fc:02:02:9a
- [ 1.596066] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
- [ 1.596071] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
- [ 1.596078] ahci 0000:03:00.0: setting latency timer to 64
- [ 1.598326] scsi6 : ahci
- [ 1.598658] scsi7 : ahci
- [ 1.598742] ata7: SATA max UDMA/133 abar m8192@0xf8ffe000 port 0xf8ffe100 irq 16
- [ 1.598746] ata8: SATA max UDMA/133 abar m8192@0xf8ffe000 port 0xf8ffe180 irq 16
- [ 1.741011] ata5.00: ATA-6: HDS722525VLAT80, V36OA6MA, max UDMA/100
- [ 1.741016] ata5.00: 488397168 sectors, multi 0: LBA48
- [ 1.764839] ata5.00: configured for UDMA/100
- [ 1.764960] scsi 4:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5
- [ 1.765124] sd 4:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB)
- [ 1.765142] sd 4:0:0:0: Attached scsi generic sg4 type 0
- [ 1.765174] sd 4:0:0:0: [sdd] Write Protect is off
- [ 1.765177] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
- [ 1.765310] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.786735] sdd: sdd1
- [ 1.787006] sd 4:0:0:0: [sdd] Attached SCSI disk
- [ 1.916048] ata7: SATA link down (SStatus 0 SControl 300)
- [ 1.916081] ata8: SATA link down (SStatus 0 SControl 300)
- [ 1.938894] nouveau 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.938900] nouveau 0000:04:00.0: setting latency timer to 64
- [ 1.939179] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- [ 1.941164] [drm] nouveau 0000:04:00.0: Detected an NV40 generation card (0x04b100b1)
- [ 1.943951] [drm] nouveau 0000:04:00.0: Attempting to load BIOS image from PRAMIN
- [ 1.947101] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input3
- [ 1.947188] generic-usb 0003:046D:C001.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.0-2/input0
- [ 1.947204] usbcore: registered new interface driver usbhid
- [ 1.947206] usbhid: USB HID core driver
- [ 1.996141] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
- [ 2.008413] [drm] nouveau 0000:04:00.0: ... appears to be valid
- [ 2.008416] [drm] nouveau 0000:04:00.0: BIT BIOS found
- [ 2.008419] [drm] nouveau 0000:04:00.0: Bios version 05.73.22.51
- [ 2.008422] [drm] nouveau 0000:04:00.0: TMDS table version 1.1
- [ 2.008423] [drm] nouveau 0000:04:00.0: TMDS table script pointers not stubbed
- [ 2.008425] [drm] nouveau 0000:04:00.0: BIT table 'd' not found
- [ 2.008428] [drm] nouveau 0000:04:00.0: Found Display Configuration Block version 3.0
- [ 2.008430] [drm] nouveau 0000:04:00.0: Raw DCB entry 0: 01000300 00000028
- [ 2.008433] [drm] nouveau 0000:04:00.0: Raw DCB entry 1: 03000302 00000000
- [ 2.008435] [drm] nouveau 0000:04:00.0: Raw DCB entry 2: 04011310 00000028
- [ 2.008459] [drm] nouveau 0000:04:00.0: Raw DCB entry 3: 04011312 00400000
- [ 2.008461] [drm] nouveau 0000:04:00.0: Raw DCB entry 4: 020223f1 00c0c083
- [ 2.008465] [drm] nouveau 0000:04:00.0: DCB connector table: VHER 0x30 5 10 2
- [ 2.008467] [drm] nouveau 0000:04:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
- [ 2.008470] [drm] nouveau 0000:04:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
- [ 2.008473] [drm] nouveau 0000:04:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
- [ 2.008475] [drm] nouveau 0000:04:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
- [ 2.008477] [drm] nouveau 0000:04:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
- [ 2.008490] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xCE4D
- [ 2.008748] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xD4F7
- [ 2.020881] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xDBFE
- [ 2.020902] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xDD82
- [ 2.024060] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xDEFA
- [ 2.024081] [drm] nouveau 0000:04:00.0: timingset 255 does not exist
- [ 2.024083] [drm] nouveau 0000:04:00.0: timingset 255 does not exist
- [ 2.043165] [drm] nouveau 0000:04:00.0: 2 available performance level(s)
- [ 2.043169] [drm] nouveau 0000:04:00.0: 0: memory 700MHz core 560MHz voltage 1300mV fanspeed 31%
- [ 2.043173] [drm] nouveau 0000:04:00.0: 1: memory 700MHz core 560MHz voltage 1300mV fanspeed 40%
- [ 2.043184] [drm] nouveau 0000:04:00.0: c: memory 702MHz core 558MHz
- [ 2.043259] [TTM] Zone kernel: Available graphics memory: 3580558 kiB.
- [ 2.043261] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
- [ 2.043263] [TTM] Initializing pool allocator.
- [ 2.043284] [drm] nouveau 0000:04:00.0: Detected 256MiB VRAM
- [ 2.064051] [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture)
- [ 2.064166] [drm] nouveau 0000:04:00.0: Saving VGA fonts
- [ 2.126783] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 2.126786] [drm] No driver support for vblank timestamp query.
- [ 2.132386] [drm] nouveau 0000:04:00.0: Setting dpms mode 3 on vga encoder (output 0)
- [ 2.132390] [drm] nouveau 0000:04:00.0: Setting dpms mode 3 on tmds encoder (output 1)
- [ 2.132392] [drm] nouveau 0000:04:00.0: Setting dpms mode 3 on vga encoder (output 2)
- [ 2.132395] [drm] nouveau 0000:04:00.0: Setting dpms mode 3 on tmds encoder (output 3)
- [ 2.132398] [drm] nouveau 0000:04:00.0: Setting dpms mode 3 on TV encoder (output 4)
- [ 2.321072] [drm] nouveau 0000:04:00.0: allocated 1280x1024 fb: 0x49000, bo ffff8801ef6ff400
- [ 2.321125] fbcon: nouveaufb (fb0) is primary device
- [ 2.321809] Console: switching to colour frame buffer device 160x64
- [ 2.321832] fb0: nouveaufb frame buffer device
- [ 2.321834] drm: registered panic notifier
- [ 2.321839] [drm] Initialized nouveau 0.0.16 20090420 for 0000:04:00.0 on minor 0
- [ 2.496103] firewire_core: created device fw0: GUID 0011d8000141ef62, S400
- [ 15.018412] [drm] nouveau 0000:04:00.0: 0xC2AC: Parsing digital output script table
- [ 15.068038] [drm] nouveau 0000:04:00.0: Setting dpms mode 0 on tmds encoder (output 1)
- [ 15.068041] [drm] nouveau 0000:04:00.0: Output DVI-I-1 is running on CRTC 0 using output A
- [ 37.090112] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
- [ 51.305942] udevd[432]: starting version 173
- [ 51.343195] lp: driver loaded but no devices found
- [ 51.407165] Adding 7335932k swap on /dev/mapper/twister-swap_1. Priority:-1 extents:1 across:7335932k
- [ 51.506244] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
- [ 51.538007] Linux video capture interface: v2.00
- [ 51.545478] type=1400 audit(1322684796.354:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=689 comm="apparmor_parser"
- [ 51.545718] type=1400 audit(1322684796.354:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=689 comm="apparmor_parser"
- [ 51.545843] type=1400 audit(1322684796.354:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=702 comm="apparmor_parser"
- [ 51.545871] type=1400 audit(1322684796.354:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=689 comm="apparmor_parser"
- [ 51.546103] type=1400 audit(1322684796.354:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=702 comm="apparmor_parser"
- [ 51.546257] type=1400 audit(1322684796.354:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=702 comm="apparmor_parser"
- [ 51.556389] IR NEC protocol handler initialized
- [ 51.566233] saa7130/34: v4l2 driver version 0.2.16 loaded
- [ 51.566278] saa7134 0000:05:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- [ 51.566283] saa7134[0]: found at 0000:05:00.0, rev: 1, irq: 21, latency: 64, mmio: 0xfbfffc00
- [ 51.566288] saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,autodetected]
- [ 51.566304] saa7134[0]: board init: gpio is c806000
- [ 51.566881] IR RC5(x) protocol handler initialized
- [ 51.573228] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 51.573274] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
- [ 51.573297] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 51.574516] IR RC6 protocol handler initialized
- [ 51.582483] IR JVC protocol handler initialized
- [ 51.591601] IR Sony protocol handler initialized
- [ 51.593048] lirc_dev: IR Remote Control driver registered, major 249
- [ 51.593243] IR LIRC bridge handler initialized
- [ 51.716677] saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
- [ 51.716686] saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
- [ 51.716695] saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
- [ 51.716703] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 51.716711] saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff
- [ 51.716719] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 51.716727] saa7134[0]: i2c eeprom 60: 0c 22 17 44 03 0a 59 5c ff ff ff ff ff ff ff ff
- [ 51.716735] saa7134[0]: i2c eeprom 70: 00 30 8d 17 98 35 ff ff b4 24 ff ff ff ff ff ff
- [ 51.716743] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 51.716751] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 51.716759] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 51.716767] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 51.716775] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 51.716783] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 51.716792] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 51.716800] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- [ 51.718118] i2c-core: driver [tuner] using legacy suspend method
- [ 51.718121] i2c-core: driver [tuner] using legacy resume method
- [ 51.790042] tda9887 3-0043: creating new instance
- [ 51.790046] tda9887 3-0043: tda988[5/6/7] found
- [ 51.800154] tuner 3-0043: Tuner 74 found with type(s) Radio TV.
- [ 51.816052] Chip ID is not zero. It is not a TEA5767
- [ 51.816061] tuner 3-0060: Tuner -1 found with type(s) Radio TV.
- [ 51.836089] mt20xx 3-0060: microtune: companycode=3cbf part=42 rev=2f
- [ 51.868190] mt20xx 3-0060: microtune MT2050 found, OK
- [ 51.948277] saa7134[0]: registered device video0 [v4l2]
- [ 51.948353] saa7134[0]: registered device vbi0
- [ 51.951958] saa7134 ALSA driver for DMA sound loaded
- [ 51.952129] saa7134[0]/alsa: saa7134[0] at 0xfbfffc00 irq 21 registered as card -2
- [ 51.959016] dvb_init() allocating 1 frontend
- [ 51.980032] DVB: registering new adapter (saa7134[0])
- [ 51.980039] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)...
- [ 52.984121] ppdev: user-space parallel port driver
- [ 52.997309] type=1400 audit(1322684797.806:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1070 comm="apparmor_parser"
- [ 52.997618] type=1400 audit(1322684797.806:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1070 comm="apparmor_parser"
- [ 53.085066] type=1400 audit(1322684797.894:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1080 comm="apparmor_parser"
- [ 53.087252] type=1400 audit(1322684797.894:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1082 comm="apparmor_parser"
- [ 53.163472] sky2 0000:02:00.0: eth0: enabling interface
- [ 53.164713] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 53.167611] skge 0000:05:04.0: eth1: enabling interface
- [ 53.382327] init: failsafe main process (989) killed by TERM signal
- [ 53.383173] init: apport pre-start process (1122) terminated with status 1
- [ 53.399524] init: apport post-stop process (1154) terminated with status 1
- [ 53.630768] Bluetooth: Core ver 2.16
- [ 53.630792] NET: Registered protocol family 31
- [ 53.630793] Bluetooth: HCI device and connection manager initialized
- [ 53.630795] Bluetooth: HCI socket layer initialized
- [ 53.630797] Bluetooth: L2CAP socket layer initialized
- [ 53.631167] Bluetooth: SCO socket layer initialized
- [ 53.633318] Bluetooth: RFCOMM TTY layer initialized
- [ 53.633322] Bluetooth: RFCOMM socket layer initialized
- [ 53.633323] Bluetooth: RFCOMM ver 1.11
- [ 53.673579] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 53.673582] Bluetooth: BNEP filters: protocol multicast
- [ 54.404197] init: plymouth-upstart-bridge main process (1014) killed by TERM signal
- [ 56.163363] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=0
- [ 56.625329] init: plymouth-stop pre-start process (1398) terminated with status 1
- [ 63.256039] eth1: no IPv6 routers present
- [ 73.791761] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=0
- [ 103.064065] usb 2-5: new high speed USB device number 3 using ehci_hcd
- [ 170.750916] usb 2-5: USB disconnect, device number 3
- [ 250.598646] sky2 0000:02:00.0: eth0: disabling interface
- [ 250.603454] skge 0000:05:04.0: eth1: disabling interface
- [ 251.431517] sky2 0000:02:00.0: eth0: enabling interface
- [ 251.432819] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 251.434578] skge 0000:05:04.0: eth1: enabling interface
- [ 251.439333] ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 328.732020] usb 2-6: new high speed USB device number 4 using ehci_hcd
- [ 375.516669] sky2 0000:02:00.0: eth0: disabling interface
- [ 375.520562] skge 0000:05:04.0: eth1: disabling interface
- [ 376.026112] sky2 0000:02:00.0: eth0: enabling interface
- [ 376.027416] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 376.029009] skge 0000:05:04.0: eth1: enabling interface
- [ 376.032986] ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 386.755126] usb 2-6: USB disconnect, device number 4
- [ 763.528070] sky2 0000:02:00.0: eth0: disabling interface
- [ 763.531956] skge 0000:05:04.0: eth1: disabling interface
- [ 765.630925] sky2 0000:02:00.0: eth0: enabling interface
- [ 765.631805] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 765.633302] skge 0000:05:04.0: eth1: enabling interface
- [ 765.637629] ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 1798.144020] usb 2-6: new high speed USB device number 5 using ehci_hcd
- [ 1798.518836] usbcore: registered new interface driver uas
- [ 1798.544734] Initializing USB Mass Storage driver...
- [ 1798.544931] scsi8 : usb-storage 2-6:1.0
- [ 1798.545014] usbcore: registered new interface driver usb-storage
- [ 1798.545016] USB Mass Storage support registered.
- [ 1799.544831] scsi 8:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 2
- [ 1799.580733] sd 8:0:0:0: Attached scsi generic sg5 type 0
- [ 1799.581318] sd 8:0:0:0: [sde] 15625216 512-byte logical blocks: (8.00 GB/7.45 GiB)
- [ 1799.584953] sd 8:0:0:0: [sde] Write Protect is off
- [ 1799.584958] sd 8:0:0:0: [sde] Mode Sense: 03 00 00 00
- [ 1799.585692] sd 8:0:0:0: [sde] No Caching mode page present
- [ 1799.585696] sd 8:0:0:0: [sde] Assuming drive cache: write through
- [ 1799.588817] sd 8:0:0:0: [sde] No Caching mode page present
- [ 1799.588821] sd 8:0:0:0: [sde] Assuming drive cache: write through
- [ 1799.592580] sde: sde1
- [ 1799.595065] sd 8:0:0:0: [sde] No Caching mode page present
- [ 1799.595070] sd 8:0:0:0: [sde] Assuming drive cache: write through
- [ 1799.595074] sd 8:0:0:0: [sde] Attached SCSI removable disk
- [ 1803.912043] usb 2-5: new high speed USB device number 6 using ehci_hcd
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement