API tools faq
paste
Guest User

kernel 4.4.11 medion nas

a guest
May 29th, 2016
156
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 12.99 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Initializing cgroup subsys cpuacct
  5. [ 0.000000] Linux version 4.4.11-oxnas-rm-1 (root@debian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Sun May 29 00:23:30 CEST 2016
  6. [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
  7. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [ 0.000000] Machine model: MitraStar Technology Corp. STG-212
  9. [ 0.000000] Memory policy: Data cache writealloc
  10. [ 0.000000] On node 0 totalpages: 32768
  11. [ 0.000000] free_area_init_node: node 0, pgdat c0846b80, node_mem_map c7ed9000
  12. [ 0.000000] Normal zone: 288 pages used for memmap
  13. [ 0.000000] Normal zone: 0 pages reserved
  14. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  15. [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
  16. [ 0.000000] PERCPU: Embedded 12 pages/cpu @c7eba000 s17760 r8192 d23200 u49152
  17. [ 0.000000] pcpu-alloc: s17760 r8192 d23200 u49152 alloc=12*4096
  18. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  19. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32480
  20. [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand:14m(boot),-(data)
  21. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  22. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  23. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  24. [ 0.000000] allocated 131072 bytes of page_ext
  25. [ 0.000000] Memory: 117068K/131072K available (6120K kernel code, 314K rwdata, 1788K rodata, 224K init, 251K bss, 14004K reserved, 0K cma-reserved)
  26. [ 0.000000] Virtual kernel memory layout:
  27. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  28. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  29. vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
  30. lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
  31. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  32. .text : 0xc0008000 - 0xc07c13d4 (7909 kB)
  33. .init : 0xc07c2000 - 0xc07fa000 ( 224 kB)
  34. .data : 0xc07fa000 - 0xc0848a70 ( 315 kB)
  35. .bss : 0xc0848a70 - 0xc08877f0 ( 252 kB)
  36. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  37. [ 0.000000] Preemptible hierarchical RCU implementation.
  38. [ 0.000000] NR_IRQS:160
  39. [ 0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
  40. [ 0.000010] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
  41. [ 0.000171] Console: colour dummy device 80x30
  42. [ 0.000202] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
  43. [ 0.050014] pid_max: default: 32768 minimum: 301
  44. [ 0.050219] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  45. [ 0.050242] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  46. [ 0.051128] Initializing cgroup subsys io
  47. [ 0.051164] Initializing cgroup subsys memory
  48. [ 0.051210] Initializing cgroup subsys devices
  49. [ 0.051233] Initializing cgroup subsys freezer
  50. [ 0.051253] Initializing cgroup subsys net_cls
  51. [ 0.051271] Initializing cgroup subsys pids
  52. [ 0.051351] CPU: Testing write buffer coherency: ok
  53. [ 0.051816] Setting up static identity map for 0x60008220 - 0x60008258
  54. [ 0.190133] Brought up 2 CPUs
  55. [ 0.190161] SMP: Total of 2 processors activated (678.29 BogoMIPS).
  56. [ 0.191047] devtmpfs: initialized
  57. [ 0.195878] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  58. [ 0.196162] prandom: seed boundary self test passed
  59. [ 0.201026] prandom: 100 self tests passed
  60. [ 0.201054] pinctrl core: initialized pinctrl subsystem
  61. [ 0.201881] NET: Registered protocol family 16
  62. [ 0.202457] DMA: preallocated 256 KiB pool for atomic coherent allocations
  63. [ 0.230026] cpuidle: using governor ladder
  64. [ 0.260016] cpuidle: using governor menu
  65. [ 0.265518] gpio-oxnas 44000000.gpio: at address c8848000
  66. [ 0.265907] gpio-oxnas 44100000.gpio: at address c884a000
  67. [ 0.266493] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
  68. [ 0.280199] vgaarb: loaded
  69. [ 0.280780] SCSI subsystem initialized
  70. [ 0.281141] libata version 3.00 loaded.
  71. [ 0.281664] usbcore: registered new interface driver usbfs
  72. [ 0.281776] usbcore: registered new interface driver hub
  73. [ 0.281935] usbcore: registered new device driver usb
  74. [ 0.282155] pps_core: LinuxPPS API ver. 1 registered
  75. [ 0.282168] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  76. [ 0.282214] PTP clock support registered
  77. [ 0.284439] clocksource: Switched to clocksource rps_clocksource_timer
  78. [ 0.304250] NET: Registered protocol family 2
  79. [ 0.305141] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  80. [ 0.305182] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
  81. [ 0.305218] TCP: Hash tables configured (established 1024 bind 1024)
  82. [ 0.305318] UDP hash table entries: 256 (order: 1, 8192 bytes)
  83. [ 0.305361] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  84. [ 0.305651] NET: Registered protocol family 1
  85. [ 0.306206] RPC: Registered named UNIX socket transport module.
  86. [ 0.306227] RPC: Registered udp transport module.
  87. [ 0.306237] RPC: Registered tcp transport module.
  88. [ 0.306247] RPC: Registered tcp NFSv4.1 backchannel transport module.
  89. [ 0.306286] PCI: CLS 0 bytes, default 32
  90. [ 0.306647] Unpacking initramfs...
  91. [ 0.712652] Freeing initrd memory: 3748K (c7a83000 - c7e2c000)
  92. [ 0.714114] futex hash table entries: 512 (order: 2, 16384 bytes)
  93. [ 0.714288] Initialise system trusted keyring
  94. [ 0.745484] zbud: loaded
  95. [ 0.761617] NFS: Registering the id_resolver key type
  96. [ 0.761684] Key type id_resolver registered
  97. [ 0.761697] Key type id_legacy registered
  98. [ 0.761753] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  99. [ 0.761774] Installing knfsd (copyright (C) 1996 [email protected]).
  100. [ 0.762775] fuse init (API version 7.23)
  101. [ 0.765002] Key type big_key registered
  102. [ 0.846072] Key type asymmetric registered
  103. [ 0.846110] Asymmetric key parser 'x509' registered
  104. [ 0.846251] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  105. [ 0.846279] io scheduler noop registered
  106. [ 0.846300] io scheduler deadline registered (default)
  107. [ 0.846919] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  108. [ 0.848358] console [ttyS0] disabled
  109. [ 0.848453] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A
  110. [ 1.409735] console [ttyS0] enabled
  111. [ 1.425410] loop: module loaded
  112. [ 1.430609] scsi host0: sata_oxnas
  113. [ 1.434478] ata1: SATA max UDMA/133 irq 7
  114. [ 1.438556] sata_oxnas: resetting SATA core
  115. [ 1.439518] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
  116. [ 1.439526] nand: Hynix H27U1G8F2BTR-BC
  117. [ 1.439536] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  118. [ 1.439554] Scanning device for bad blocks
  119. [ 1.521228] 2 cmdlinepart partitions found on MTD device 41000000.nand
  120. [ 1.527731] Creating 2 MTD partitions on "41000000.nand":
  121. [ 1.533140] 0x000000000000-0x000000e00000 : "boot"
  122. [ 1.539855] 0x000000e00000-0x000008000000 : "data"
  123. [ 1.547166] oxnas-gmac 40400000.ethernet: no reset control found
  124. [ 1.553190] stmmac - user ID: 0x12, Synopsys ID: 0x35
  125. [ 1.558213] Ring mode enabled
  126. [ 1.561267] DMA HW capability register supported
  127. [ 1.565775] Enhanced/Alternate descriptors
  128. [ 1.570122] Enabled extended descriptors
  129. [ 1.574105] RX Checksum Offload Engine supported (type 2)
  130. [ 1.579560] TX Checksum insertion supported
  131. [ 1.583820] Wake-Up On Lan supported
  132. [ 1.587458] Enable RX Mitigation via HW Watchdog Timer
  133. [ 1.610954] libphy: stmmac: probed
  134. [ 1.614351] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
  135. [ 1.620700] eth0: PHY ID 001cc915 at 7 IRQ POLL (stmmac-0:07)
  136. [ 1.626516] PPP generic driver version 2.4.2
  137. [ 1.631257] usbcore: registered new interface driver rtl8xxxu
  138. [ 1.637012] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  139. [ 1.643599] ehci-pci: EHCI PCI platform driver
  140. [ 1.648524] oxnas-ehci 40200100.ehci: EHCI Host Controller
  141. [ 1.654082] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
  142. [ 1.661913] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100
  143. [ 1.680151] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
  144. [ 1.686489] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  145. [ 1.693288] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  146. [ 1.700500] usb usb1: Product: EHCI Host Controller
  147. [ 1.705356] usb usb1: Manufacturer: Linux 4.4.11-oxnas-rm-1 ehci_hcd
  148. [ 1.711697] usb usb1: SerialNumber: 40200100.ehci
  149. [ 1.717424] hub 1-0:1.0: USB hub found
  150. [ 1.721295] hub 1-0:1.0: 2 ports detected
  151. [ 1.726346] usbcore: registered new interface driver cdc_acm
  152. [ 1.732021] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  153. [ 1.740185] usbcore: registered new interface driver usblp
  154. [ 1.745735] usbcore: registered new interface driver cdc_wdm
  155. [ 1.751569] usbcore: registered new interface driver usb-storage
  156. [ 1.757724] usbcore: registered new interface driver usbserial
  157. [ 1.763671] usbcore: registered new interface driver usbserial_generic
  158. [ 1.770263] usbserial: USB Serial support registered for generic
  159. [ 1.776642] mousedev: PS/2 mouse device common for all mice
  160. [ 1.782415] i2c /dev entries driver
  161. [ 1.787271] hidraw: raw HID events driver (C) Jiri Kosina
  162. [ 1.792954] usbcore: registered new interface driver usbhid
  163. [ 1.798499] usbhid: USB HID core driver
  164. [ 1.804695] NET: Registered protocol family 10
  165. [ 1.810575] sit: IPv6 over IPv4 tunneling driver
  166. [ 1.816268] NET: Registered protocol family 17
  167. [ 1.821173] Key type dns_resolver registered
  168. [ 1.826810] registered taskstats version 1
  169. [ 1.830978] Loading compiled-in X.509 certificates
  170. [ 1.835904] zswap: loaded using pool lzo/zbud
  171. [ 1.855979] Key type encrypted registered
  172. [ 1.980016] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  173. [ 1.987176] ata1.00: ATA-9: ST2000DM001-1CH164, CC47, max UDMA/133
  174. [ 1.993377] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)
  175. [ 2.000773] ata1.00: configured for UDMA/133
  176. [ 2.020728] scsi 0:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC47 PQ: 0 ANSI: 5
  177. [ 2.030517] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
  178. [ 2.038282] sd 0:0:0:0: [sda] 4096-byte physical blocks
  179. [ 2.043553] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
  180. [ 2.050787] sd 0:0:0:0: [sda] Write Protect is off
  181. [ 2.055567] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  182. [ 2.055856] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  183. [ 2.089492] sda: sda1
  184. [ 2.093719] sd 0:0:0:0: [sda] Attached SCSI disk
  185. [ 2.098654] Freeing unused kernel memory: 224K (c07c2000 - c07fa000)
  186. [ 2.217228] usb 1-1: New USB device found, idVendor=18a5, idProduct=0304
  187. [ 2.224040] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  188. [ 2.231216] usb 1-1: Product: STORE N GO
  189. [ 2.235128] usb 1-1: Manufacturer: Verbatim
  190. [ 2.239290] usb 1-1: SerialNumber: 07092607D87E1483
  191. [ 2.245829] usb-storage 1-1:1.0: USB Mass Storage device detected
  192. [ 2.255884] systemd-udevd[102]: starting version 215
  193. [ 2.266859] random: systemd-udevd urandom read with 7 bits of entropy available
  194. [ 2.285373] scsi host1: usb-storage 1-1:1.0
  195. [ 2.303646] usbcore: registered new interface driver uas
  196. [ 3.292551] scsi 1:0:0:0: Direct-Access Verbatim STORE N GO PMAP PQ: 0 ANSI: 4
  197. [ 3.308423] sd 1:0:0:0: [sdb] 7634944 512-byte logical blocks: (3.91 GB/3.64 GiB)
  198. [ 3.320166] sd 1:0:0:0: [sdb] Write Protect is off
  199. [ 3.324974] sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00
  200. [ 3.326054] sd 1:0:0:0: [sdb] No Caching mode page found
  201. [ 3.331624] sd 1:0:0:0: [sdb] Assuming drive cache: write through
  202. [ 3.346424] sdb: sdb1 sdb2
  203. [ 3.366673] sd 1:0:0:0: [sdb] Attached SCSI removable disk
  204. [ 13.089487] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
  205. [ 15.051486] systemd-udevd[299]: starting version 215
  206. [ 15.610721] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
  207. [ 15.630745] random: nonblocking pool is initialized
  208. [ 15.636129] i2c-gpio i2c-gpio: using pins 41 (SDA) and 42 (SCL)
  209. [ 17.241328] Adding 261116k swap on /dev/sdb2. Priority:-1 extents:1 across:261116k FS
  210. [ 17.434721] EXT4-fs (sdb1): re-mounted. Opts: (null)
  211. [ 17.729648] EXT4-fs (sdb1): re-mounted. Opts: (null)
  212. [ 21.257244] EXT4-fs (sda1): mounted filesystem with writeback data mode. Opts: data=writeback
  213. [ 29.840307] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!