logs for chris clark

2015-03-20 16:44:29  ★ Dustin Bryant reaches for the car lift's controls, raising it up, as he steps underneath and rolls the -
2015-03-20 16:44:45  ★ -car jack below the doorsteps, in order to pump it up using compressed oxygen to raise the -      ((Dustin Bryant))
2015-03-20 16:44:56   [English] Bryan Anderson says: Aight, so what are we aiming for in the top speed Harry
2015-03-20 16:45:02  ★ -wheels from the lift's bed. Dustin then repeats said process on the back of the vehicle-      ((Dustin Bryant))
2015-03-20 16:45:20  ★ -as he bends down and grabs for the impact wrench, connecting it to the Bosch 10 gallon air-      ((Dustin Bryant))
2015-03-20 16:45:39  ★ -compressor and starts to take off the wheels from their hub.      ((Dustin Bryant))
2015-03-20 16:47:06  ★ Dustin Bryant lifts the wheels one by one to the ground after dismounting, laying them face-up, onto the -
2015-03-20 16:47:35  ★ -workfloor, before then reaching for the lift controls, slowly lowering the lift back to -      ((Dustin Bryant))
2015-03-20 16:48:30  ★ -a decent workheight, grabbing for the strut's nuts, turning them off slowly using a 14mm -      ((Dustin Bryant))
2015-03-20 16:49:30  ★ -wrench, as he slowly disconnects the hub from the suspension system, before then lowering -      ((Dustin Bryant))
2015-03-20 16:49:46  ★ -the lift even further, quickly taking out the bolts on top of the vehicle, using a ratchet      ((Dustin Bryant))
2015-03-20 16:54:33  ★ -and 19mm head. Dustin continues to take out the coilover from the vehicle, as he then reac-      ((Dustin Bryant))
2015-03-20 16:55:06  ★ -hes for the box, containing the Megan Racing coilovers, taking one out carefully, as he-      ((Dustin Bryant))
2015-03-20 16:55:32  ★ -gently fits it in place, using the three new bolts to hand-tighten the bolts, fitting it in      ((Dustin Bryant))
2015-03-20 16:55:57  ★ -place on the downside after raising the car lift again, attaching the coilie to the hub -      ((Dustin Bryant))
2015-03-20 16:56:04  ★ -using a few strikes of a big jackhammer.      ((Dustin Bryant))
2015-03-20 16:56:34  ★ Dustin Bryant lowers the car lift again, tightening the bolts using the ratchet and 19mm socket, before -
2015-03-20 16:56:51  ★ -then raising it once again, pulling the coilover to check if it's secure.      ((Dustin Bryant))
2015-03-20 16:57:12  ★ Dustin Bryant takes one of the wheels, lifting it using his arms, as he slides it onto the hub of the -
2015-03-20 16:57:24  ★ -vehicle, slowly kicking the bolts in using the impact wrench.      ((Dustin Bryant))
2015-03-20 16:58:37  ★ As time passes, Dustin repeats said process another three times in order to finish the -      ((Dustin Bryant))
2015-03-20 16:58:41  ★ -vehicle all-around.      ((Dustin Bryant))