API tools faq
paste
Advertisement
Guest User

RuneAudio Debug Info for GeekOut 720 USB Dac

a guest
Aug 19th, 2014
536
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 50.88 KB | None | 0 0
raw download clone embed print report
  1.  
  2. ###### System info ######
  3. Linux version 3.12.19-2-ARCH (root@CS) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 PREEMPT Thu May 22 15:35:00 UTC 2014
  4.  
  5. system time: Tue Aug 19 01:53:41 UTC 2014
  6.  
  7. system load: 0.09 0.54 1.10 2/89 2417
  8.  
  9. HW platform: RaspberryPi (01)
  10.  
  11. playerID: 019316846de15ee202278f9791a3098979
  12.  
  13.  
  14. ###### System load statistics (procinfo -H) ######
  15. Memory: Total Used Free Buffers
  16. RAM: 437.35MiB 387.80MiB 49.55MiB 209.51MiB
  17. Swap: 0.00B 0.00B 0.00B
  18.  
  19. Bootup: Tue Aug 19 01:25:52 2014 Load average: 0.09 0.54 1.10 1/91 2419
  20.  
  21. user : 00:07:06.37 26.5% page in : 6270654
  22. nice : 00:00:00.00 0.0% page out: 3672
  23. system: 00:06:56.56 25.9% page act: 79798
  24. IOwait: 00:02:53.78 10.8% page dea: 0
  25. hw irq: 00:00:00.81 0.1% page flt: 1001910
  26. sw irq: 00:02:02.73 7.6% swap in : 0
  27. idle : 00:07:46.11 29.0% swap out: 0
  28. uptime: 00:27:48.88 context : 3108542
  29.  
  30. irq 3: 1056289 irq 66: 38010
  31. irq 16: 0 irq 75: 1
  32. irq 20: 2164 irq 77: 18749
  33. irq 32: 3164485 irq 79: 27
  34. irq 52: 0 irq 80: 0
  35. irq 65: 4 irq 84: 24900
  36.  
  37. mmcblk0 4182r 3 mmcblk0p3 50r
  38. mmcblk0p1 96r mmcblk0p5 3974r
  39. mmcblk0p2 2r sda 124470r 1w
  40.  
  41. eth0 TX 1.78MiB RX 875.72KiB wlan0 TX 0.00B RX 0.00B
  42. lo TX 4.12MiB RX 4.12MiB
  43.  
  44.  
  45. ###### Active processes (pstree) ######
  46. systemd-+-agetty
  47. |-avahi-daemon---avahi-daemon
  48. |-avahi-dnsconfd
  49. |-dbus-daemon
  50. |-debug_collector---sh---pstree
  51. |-devmon---udevil
  52. |-2*[dhcpcd]
  53. |-ifplugd
  54. |-mount.exfat
  55. |-mpd---6*[{mpd}]
  56. |-nginx---nginx
  57. |-nmbd
  58. |-php-fpm---3*[php-fpm]
  59. |-redis-server---2*[{redis-server}]
  60. |-refresh_nics
  61. |-rpc.idmapd
  62. |-rpc.statd
  63. |-rpcbind
  64. |-rune_PL_wrk
  65. |-rune_SY_wrk
  66. |-shairport---{shairport}
  67. |-sshd---sshd---bash---vi
  68. |-systemd-udevd
  69. `-wpa_supplicant
  70.  
  71.  
  72. ###### Audio backend ######
  73. Advanced Linux Sound Architecture Driver Version k3.12.19-2-ARCH.
  74.  
  75. Card list: (/proc/asound/cards)
  76. --------------------------------------------------
  77. 0 [ALSA ]: bcm2835 - bcm2835 ALSA
  78. bcm2835 ALSA
  79. 1 [G1V0 ]: USB-Audio - Geek Out HD Audio 1V0
  80. LH Labs Geek Out HD Audio 1V0 at usb-bcm2708_usb-1.3.1.4, high speed
  81. 2 [sndrpiiqaudioda]: snd_rpi_iqaudio - snd_rpi_iqaudio_dac
  82. snd_rpi_iqaudio_dac
  83.  
  84.  
  85. PLAYBACK devices: (aplay -l)
  86. --------------------------------------------------
  87. **** List of PLAYBACK Hardware Devices ****
  88. card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
  89. Subdevices: 8/8
  90. Subdevice #0: subdevice #0
  91. Subdevice #1: subdevice #1
  92. Subdevice #2: subdevice #2
  93. Subdevice #3: subdevice #3
  94. Subdevice #4: subdevice #4
  95. Subdevice #5: subdevice #5
  96. Subdevice #6: subdevice #6
  97. Subdevice #7: subdevice #7
  98. card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
  99. Subdevices: 1/1
  100. Subdevice #0: subdevice #0
  101. card 1: G1V0 [Geek Out HD Audio 1V0], device 0: USB Audio [USB Audio]
  102. Subdevices: 1/1
  103. Subdevice #0: subdevice #0
  104. card 2: sndrpiiqaudioda [snd_rpi_iqaudio_dac], device 0: IQaudIO DAC HiFi pcm512x-hifi-0 []
  105. Subdevices: 1/1
  106. Subdevice #0: subdevice #0
  107.  
  108.  
  109. PCM devices: (aplay -L)
  110. --------------------------------------------------
  111. null
  112. Discard all samples (playback) or generate zero samples (capture)
  113. default:CARD=ALSA
  114. bcm2835 ALSA, bcm2835 ALSA
  115. Default Audio Device
  116. sysdefault:CARD=ALSA
  117. bcm2835 ALSA, bcm2835 ALSA
  118. Default Audio Device
  119. default:CARD=G1V0
  120. Geek Out HD Audio 1V0, USB Audio
  121. Default Audio Device
  122. sysdefault:CARD=G1V0
  123. Geek Out HD Audio 1V0, USB Audio
  124. Default Audio Device
  125. front:CARD=G1V0,DEV=0
  126. Geek Out HD Audio 1V0, USB Audio
  127. Front speakers
  128. surround40:CARD=G1V0,DEV=0
  129. Geek Out HD Audio 1V0, USB Audio
  130. 4.0 Surround output to Front and Rear speakers
  131. surround41:CARD=G1V0,DEV=0
  132. Geek Out HD Audio 1V0, USB Audio
  133. 4.1 Surround output to Front, Rear and Subwoofer speakers
  134. surround50:CARD=G1V0,DEV=0
  135. Geek Out HD Audio 1V0, USB Audio
  136. 5.0 Surround output to Front, Center and Rear speakers
  137. surround51:CARD=G1V0,DEV=0
  138. Geek Out HD Audio 1V0, USB Audio
  139. 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
  140. surround71:CARD=G1V0,DEV=0
  141. Geek Out HD Audio 1V0, USB Audio
  142. 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
  143. iec958:CARD=G1V0,DEV=0
  144. Geek Out HD Audio 1V0, USB Audio
  145. IEC958 (S/PDIF) Digital Audio Output
  146. default:CARD=sndrpiiqaudioda
  147. snd_rpi_iqaudio_dac,
  148. Default Audio Device
  149. sysdefault:CARD=sndrpiiqaudioda
  150. snd_rpi_iqaudio_dac,
  151. Default Audio Device
  152.  
  153.  
  154. Simple mixer controls: (amixer scontrols)
  155. --------------------------------------------------
  156. card 0:
  157. Simple mixer control 'PCM',0
  158.  
  159. card 1:
  160. Simple mixer control 'LH Labs Clock Selector',0
  161. Simple mixer control 'LH Labs Clock Selector',1
  162.  
  163. card 2:
  164. Simple mixer control 'DSP Program',0
  165. Simple mixer control 'Playback Digital',0
  166. Simple mixer control 'Auto Mute',0
  167. Simple mixer control 'Auto Mute Mono',0
  168. Simple mixer control 'Auto Mute Time Left',0
  169. Simple mixer control 'Auto Mute Time Right',0
  170. Simple mixer control 'Clock Missing Period',0
  171. Simple mixer control 'Deemphasis',0
  172. Simple mixer control 'Volume Ramp Down Emergency Rate',0
  173. Simple mixer control 'Volume Ramp Down Emergency Step',0
  174. Simple mixer control 'Volume Ramp Down Rate',0
  175. Simple mixer control 'Volume Ramp Down Step',0
  176. Simple mixer control 'Volume Ramp Up Rate',0
  177. Simple mixer control 'Volume Ramp Up Step',0
  178.  
  179.  
  180. Mixer controls: (amixer controls)
  181. --------------------------------------------------
  182. card 0:
  183. numid=3,iface=MIXER,name='PCM Playback Route'
  184. numid=2,iface=MIXER,name='PCM Playback Switch'
  185. numid=1,iface=MIXER,name='PCM Playback Volume'
  186. numid=5,iface=PCM,name='IEC958 Playback Con Mask'
  187. numid=4,iface=PCM,name='IEC958 Playback Default'
  188.  
  189. card 1:
  190. numid=1,iface=MIXER,name='LH Labs Clock Selector Playback Switch'
  191. numid=2,iface=MIXER,name='LH Labs Clock Selector Playback Switch',index=1
  192. numid=3,iface=MIXER,name='LH Labs Clock Selector Playback Volume'
  193. numid=4,iface=MIXER,name='LH Labs Clock Selector Playback Volume',index=1
  194.  
  195. card 2:
  196. numid=4,iface=MIXER,name='DSP Program'
  197. numid=2,iface=MIXER,name='Playback Digital Switch'
  198. numid=1,iface=MIXER,name='Playback Digital Volume'
  199. numid=8,iface=MIXER,name='Auto Mute Mono Switch'
  200. numid=9,iface=MIXER,name='Auto Mute Switch'
  201. numid=6,iface=MIXER,name='Auto Mute Time Left'
  202. numid=7,iface=MIXER,name='Auto Mute Time Right'
  203. numid=5,iface=MIXER,name='Clock Missing Period'
  204. numid=3,iface=MIXER,name='Deemphasis Switch'
  205. numid=14,iface=MIXER,name='Volume Ramp Down Emergency Rate'
  206. numid=15,iface=MIXER,name='Volume Ramp Down Emergency Step'
  207. numid=10,iface=MIXER,name='Volume Ramp Down Rate'
  208. numid=11,iface=MIXER,name='Volume Ramp Down Step'
  209. numid=12,iface=MIXER,name='Volume Ramp Up Rate'
  210. numid=13,iface=MIXER,name='Volume Ramp Up Step'
  211.  
  212.  
  213. ###### mpd.conf ######
  214. ###################################
  215. # Auto generated mpd.conf file
  216. # please DO NOT edit it manually!
  217. # Use RuneUI MPD config section
  218. ###################################
  219.  
  220. zeroconf_enabled "yes"
  221. zeroconf_name "runeaudio"
  222. bind_to_address "/run/mpd.sock"
  223. bind_to_address "any"
  224. port "6600"
  225. max_connections "20"
  226. user "mpd"
  227. group "audio"
  228. db_file "/var/lib/mpd/mpd.db"
  229. sticker_file "/var/lib/mpd/sticker.sql"
  230. pid_file "/var/run/mpd/pid"
  231. music_directory "/mnt/MPD"
  232. playlist_directory "/var/lib/mpd/playlists"
  233. follow_outside_symlinks "yes"
  234. follow_inside_symlinks "yes"
  235. auto_update "no"
  236. filesystem_charset "UTF-8"
  237. id3v1_encoding "UTF-8"
  238. volume_normalization "no"
  239. audio_buffer_size "1024"
  240. buffer_before_play "0%"
  241. gapless_mp3_playback "yes"
  242.  
  243. audio_output {
  244. name "snd_rpi_iqaudio_dac"
  245. type "alsa"
  246. device "hw:2,0"
  247. mixer_type "hardware"
  248. mixer_device "hw:1"
  249. mixer_control "Playback Digital"
  250. auto_resample "no"
  251. auto_format "no"
  252. }
  253.  
  254. audio_output {
  255. name "Geek Out HD Audio 1V0"
  256. type "alsa"
  257. device "hw:1,0"
  258. mixer_type "hardware"
  259. auto_resample "no"
  260. auto_format "no"
  261. enabled "yes"
  262. }
  263.  
  264. audio_output {
  265. name "bcm2835 ALSA"
  266. type "alsa"
  267. device "hw:0,0"
  268. mixer_type "hardware"
  269. auto_resample "no"
  270. auto_format "no"
  271. }
  272.  
  273.  
  274. ###### Kernel optimization parameters ######
  275. hardware platform: RaspberryPi
  276. current orionprofile: OrionV3_iqaudio
  277.  
  278.  
  279. kernel scheduler for mmcblk0: [noop] deadline cfq
  280. /proc/sys/vm/swappiness: 60
  281. /proc/sys/kernel/sched_latency_ns: 6000000
  282. /proc/sys/kernel/sched_rt_period_us: 1000000
  283. /proc/sys/kernel/sched_rt_runtime_us: 950000
  284. /proc/sys/kernel/sched_autogroup_enabled: 1
  285. /proc/sys/kernel/sched_rr_timeslice_ms: 100
  286. /proc/sys/kernel/sched_min_granularity_ns: 750000
  287. /proc/sys/kernel/sched_wakeup_granularity_ns: 1000000
  288.  
  289.  
  290. ###### Kernel module snd_usb_audio settings ######
  291. Module = "snd_usb_audio"
  292.  
  293. Attributes:
  294. coresize = "116428"
  295. initsize = "0"
  296. initstate = "live"
  297. refcnt = "0"
  298. taint = ""
  299. uevent =
  300.  
  301. Parameters:
  302. autoclock = "Y"
  303. device_setup = "0,0,0,0,0,0,0,0"
  304. enable = "Y,Y,Y,Y,Y,Y,Y,Y"
  305. id = "(null),(null),(null),(null),(null),(null),(null),(null)"
  306. ignore_ctl_error = "N"
  307. index = "-1,-1,-1,-1,-1,-1,-1,-1"
  308. nrpacks = "3"
  309. pid = "-1,-1,-1,-1,-1,-1,-1,-1"
  310. vid = "-1,-1,-1,-1,-1,-1,-1,-1"
  311.  
  312. Sections:
  313. .ARM.exidx.exit.text= "0xbf24dbac"
  314. .ARM.exidx.init.text= "0xbf24dba4"
  315. .ARM.exidx = "0xbf2502f0"
  316. .ARM.extab = "0xbf2502b4"
  317. .ARM.extab.init.text= "0xbf24db98"
  318. .bss = "0xbf25336c"
  319. .data = "0xbf250814"
  320. .exit.text = "0xbf24b1e8"
  321. .gnu.linkonce.this_module= "0xbf2531f8"
  322. .init.text = "0xbf25c000"
  323. .note.gnu.build-id = "0xbf2507f0"
  324. .rodata = "0xbf24b1f8"
  325. .rodata.str1.4 = "0xbf24dbb4"
  326. .strtab = "0xbf2612d8"
  327. .symtab = "0xbf25c048"
  328. .text = "0xbf23e000"
  329. __param = "0xbf250224"
  330.  
  331.  
  332. ###### Systemd active startup scripts (ls -lah /etc/systemd/system/multi-user.target.wants/) ######
  333. total 8.0K
  334. drwxr-xr-x 2 root root 4.0K Jul 8 22:56 .
  335. drwxr-xr-x 4 root root 4.0K Jul 6 20:43 ..
  336. lrwxrwxrwx 1 root root 44 Jul 22 2013 avahi-daemon.service -> /usr/lib/systemd/system/avahi-daemon.service
  337. lrwxrwxrwx 1 root root 46 Jul 22 2013 avahi-dnsconfd.service -> /usr/lib/systemd/system/avahi-dnsconfd.service
  338. lrwxrwxrwx 1 root root 40 Jul 2 02:13 ifplugd@eth0.service -> /usr/lib/systemd/system/ifplugd@.service
  339. lrwxrwxrwx 1 root root 35 Dec 7 2013 mpd.service -> /usr/lib/systemd/system/mpd.service
  340. lrwxrwxrwx 1 root root 39 Jul 2 02:39 netctl@eth0.service -> /etc/systemd/system/netctl@eth0.service
  341. lrwxrwxrwx 1 root root 37 Nov 10 2013 nginx.service -> /usr/lib/systemd/system/nginx.service
  342. lrwxrwxrwx 1 root root 39 Nov 10 2013 php-fpm.service -> /usr/lib/systemd/system/php-fpm.service
  343. lrwxrwxrwx 1 root root 40 Feb 25 06:43 rc-local.service -> /usr/lib/systemd/system/rc-local.service
  344. lrwxrwxrwx 1 root root 37 Mar 7 12:43 redis.service -> /usr/lib/systemd/system/redis.service
  345. lrwxrwxrwx 1 root root 51 Apr 14 23:09 remote-fs.target -> ../../../../usr/lib/systemd/system/remote-fs.target
  346. lrwxrwxrwx 1 root root 39 Jan 1 1970 rpcbind.service -> /usr/lib/systemd/system/rpcbind.service
  347. lrwxrwxrwx 1 root root 42 Jan 1 1970 rpc-idmapd.service -> /usr/lib/systemd/system/rpc-idmapd.service
  348. lrwxrwxrwx 1 root root 41 Jan 1 1970 rpc-statd.service -> /usr/lib/systemd/system/rpc-statd.service
  349. lrwxrwxrwx 1 root root 43 Feb 10 2014 rune_PL_wrk.service -> /usr/lib/systemd/system/rune_PL_wrk.service
  350. lrwxrwxrwx 1 root root 45 Feb 12 2014 rune_shutdown.service -> /usr/lib/systemd/system/rune_shutdown.service
  351. lrwxrwxrwx 1 root root 43 Jan 15 2014 rune_SY_wrk.service -> /usr/lib/systemd/system/rune_SY_wrk.service
  352. lrwxrwxrwx 1 root root 43 Jul 22 2013 sshdgenkeys.service -> /usr/lib/systemd/system/sshdgenkeys.service
  353. lrwxrwxrwx 1 root root 36 Jul 22 2013 sshd.service -> /usr/lib/systemd/system/sshd.service
  354.  
  355.  
  356. ###### Filesystem mounts ######
  357. rootfs / rootfs rw 0 0
  358. /dev/root / ext4 rw,noatime,nouser_xattr,errors=remount-ro,data=ordered 0 0
  359. devtmpfs /dev devtmpfs rw,relatime,size=219728k,nr_inodes=54932,mode=755 0 0
  360. proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
  361. sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
  362. securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0
  363. tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
  364. devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620 0 0
  365. tmpfs /run tmpfs rw,nosuid,nodev,mode=755 0 0
  366. tmpfs /sys/fs/cgroup tmpfs ro,nosuid,nodev,noexec,mode=755 0 0
  367. cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/usr/lib/systemd/systemd-cgroups-agent,name=systemd 0 0
  368. cgroup /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0
  369. cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpuacct,cpu 0 0
  370. cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0
  371. cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0
  372. cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0
  373. cgroup /sys/fs/cgroup/perf_event cgroup rw,nosuid,nodev,noexec,relatime,perf_event 0 0
  374. systemd-1 /proc/sys/fs/binfmt_misc autofs rw,relatime,fd=21,pgrp=1,timeout=300,minproto=5,maxproto=5,direct 0 0
  375. debugfs /sys/kernel/debug debugfs rw,relatime 0 0
  376. mqueue /dev/mqueue mqueue rw,relatime 0 0
  377. tmpfs /tmp tmpfs rw 0 0
  378. configfs /sys/kernel/config configfs rw,relatime 0 0
  379. logs /var/log tmpfs rw,nosuid,nodev,noatime,size=5120k 0 0
  380. Ramdisk /run/shm tmpfs rw,nosuid,nodev,noexec,relatime,size=262144k 0 0
  381. rpc_pipefs /var/lib/nfs/rpc_pipefs rpc_pipefs rw,relatime 0 0
  382. rune-logs /var/log/runeaudio tmpfs rw,nosuid,nodev,noatime,size=20480k 0 0
  383. /dev/mmcblk0p1 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro 0 0
  384. /dev/sda2 /mnt/MPD/USB/Samsung2T fuseblk rw,nosuid,nodev,noexec,noatime,user_id=0,group_id=0,allow_other,blksize=4096 0 0
  385. fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0
  386.  
  387.  
  388. ###### Filesystem mounts - free space (df -h) ######
  389. Filesystem Size Used Avail Use% Mounted on
  390. /dev/root 1.7G 1.3G 267M 83% /
  391. devtmpfs 215M 0 215M 0% /dev
  392. tmpfs 219M 0 219M 0% /dev/shm
  393. tmpfs 219M 376K 219M 1% /run
  394. tmpfs 219M 0 219M 0% /sys/fs/cgroup
  395. tmpfs 219M 0 219M 0% /tmp
  396. logs 5.0M 20K 5.0M 1% /var/log
  397. Ramdisk 256M 0 256M 0% /run/shm
  398. rune-logs 20M 84K 20M 1% /var/log/runeaudio
  399. /dev/mmcblk0p1 90M 27M 64M 30% /boot
  400. /dev/sda2 1.9T 1.4T 522G 72% /mnt/MPD/USB/Samsung2T
  401.  
  402.  
  403. ###### Loaded kernel modules ######
  404. Module Size Used by
  405. fuse 76629 3
  406. nls_utf8 1259 0
  407. snd_soc_iqaudio_dac 2533 0
  408. snd_soc_pcm512x 8984 1
  409. arc4 1716 2
  410. rt2800usb 17421 0
  411. rt2800lib 80026 1 rt2800usb
  412. snd_soc_wm8804 7767 0
  413. crc_ccitt 1565 1 rt2800lib
  414. rt2x00usb 11060 1 rt2800usb
  415. rt2x00lib 43777 3 rt2x00usb,rt2800lib,rt2800usb
  416. mac80211 478047 3 rt2x00lib,rt2x00usb,rt2800lib
  417. snd_usb_audio 116428 0
  418. cfg80211 430515 2 mac80211,rt2x00lib
  419. snd_usbmidi_lib 19121 1 snd_usb_audio
  420. snd_hwdep 5859 1 snd_usb_audio
  421. snd_rawmidi 21382 1 snd_usbmidi_lib
  422. snd_seq_device 6493 1 snd_rawmidi
  423. snd_soc_bcm2708_i2s 5657 2
  424. regmap_mmio 2838 1 snd_soc_bcm2708_i2s
  425. snd_soc_core 152794 4 snd_soc_pcm512x,snd_soc_wm8804,snd_soc_iqaudio_dac,snd_soc_bcm2708_i2s
  426. leds_gpio 2142 0
  427. led_class 4162 2 leds_gpio,rt2x00lib
  428. snd_compress 8219 1 snd_soc_core
  429. snd_pcm_dmaengine 5533 1 snd_soc_core
  430. bcm2708_dmaengine 5224 1
  431. regmap_spi 1941 3 snd_soc_pcm512x,snd_soc_wm8804,snd_soc_core
  432. spi_bcm2708 4844 0
  433. regmap_i2c 1685 3 snd_soc_pcm512x,snd_soc_wm8804,snd_soc_core
  434. virt_dma 2309 1 bcm2708_dmaengine
  435. i2c_bcm2708 4161 0
  436. snd_bcm2835 18168 2
  437. snd_pcm 79264 5 snd_bcm2835,snd_usb_audio,snd_soc_core,snd_soc_iqaudio_dac,snd_pcm_dmaengine
  438. snd_page_alloc 5192 1 snd_pcm
  439. snd_timer 20362 1 snd_pcm
  440. snd 60119 14 snd_bcm2835,snd_usb_audio,snd_soc_core,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_seq_device,snd_compress
  441. bcm2708_rng 1044 0
  442. rng_core 4159 1 bcm2708_rng
  443. nfs 205790 0
  444. lockd 64174 1 nfs
  445. sunrpc 237524 3 nfs,lockd
  446.  
  447.  
  448. ###### Network listening sockets (netstat -lnp) ######
  449. Active Internet connections (only servers)
  450. Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
  451. tcp 0 0 0.0.0.0:6600 0.0.0.0:* LISTEN 2394/mpd
  452. tcp 0 0 0.0.0.0:5002 0.0.0.0:* LISTEN 1396/shairport
  453. tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 375/redis-server 12
  454. tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 361/rpcbind
  455. tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 380/nginx: master p
  456. tcp 0 0 0.0.0.0:81 0.0.0.0:* LISTEN 380/nginx: master p
  457. tcp 0 0 0.0.0.0:82 0.0.0.0:* LISTEN 380/nginx: master p
  458. tcp 0 0 0.0.0.0:35091 0.0.0.0:* LISTEN 397/rpc.statd
  459. tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 356/sshd
  460. udp 0 0 0.0.0.0:68 0.0.0.0:* 396/dhcpcd
  461. udp 0 0 0.0.0.0:68 0.0.0.0:* 352/dhcpcd
  462. udp 0 0 0.0.0.0:111 0.0.0.0:* 361/rpcbind
  463. udp 0 0 0.0.0.0:42095 0.0.0.0:* 116/avahi-daemon: r
  464. udp 0 0 0.0.0.0:41591 0.0.0.0:* 397/rpc.statd
  465. udp 0 0 192.168.0.255:137 0.0.0.0:* 2315/nmbd
  466. udp 0 0 192.168.0.8:137 0.0.0.0:* 2315/nmbd
  467. udp 0 0 0.0.0.0:137 0.0.0.0:* 2315/nmbd
  468. udp 0 0 192.168.0.255:138 0.0.0.0:* 2315/nmbd
  469. udp 0 0 192.168.0.8:138 0.0.0.0:* 2315/nmbd
  470. udp 0 0 0.0.0.0:138 0.0.0.0:* 2315/nmbd
  471. udp 0 0 0.0.0.0:957 0.0.0.0:* 361/rpcbind
  472. udp 0 0 127.0.0.1:1001 0.0.0.0:* 397/rpc.statd
  473. udp 0 0 0.0.0.0:5353 0.0.0.0:* 116/avahi-daemon: r
  474. Active UNIX domain sockets (only servers)
  475. Proto RefCnt Flags Type State I-Node PID/Program name Path
  476. unix 2 [ ACC ] STREAM LISTENING 6954 367/php-fpm: master /var/run/php-display.sock
  477. unix 2 [ ACC ] STREAM LISTENING 6957 367/php-fpm: master /var/run/php-db.sock
  478. unix 2 [ ACC ] STREAM LISTENING 6960 367/php-fpm: master /var/run/php-command.sock
  479. unix 2 [ ACC ] STREAM LISTENING 3971 1/init /var/run/avahi-daemon/socket
  480. unix 2 [ ACC ] STREAM LISTENING 6535 361/rpcbind /var/run/rpcbind.sock
  481. unix 2 [ ACC ] STREAM LISTENING 74405 2315/nmbd /var/run/samba/nmbd/unexpected
  482. unix 2 [ ACC ] STREAM LISTENING 2223 1/init /run/systemd/private
  483. unix 2 [ ACC ] STREAM LISTENING 4016 1/init /run/dbus/system_bus_socket
  484. unix 2 [ ACC ] SEQPACKET LISTENING 2237 1/init /run/udev/control
  485. unix 2 [ ACC ] STREAM LISTENING 74997 2394/mpd /run/mpd.sock
  486.  
  487.  
  488. ###### Network established sockets (netstat -np) ######
  489. Active Internet connections (w/o servers)
  490. Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
  491. tcp 0 0 127.0.0.1:6379 127.0.0.1:42390 ESTABLISHED 375/redis-server 12
  492. tcp 0 0 192.168.0.8:80 192.168.0.2:53217 TIME_WAIT -
  493. tcp 0 0 127.0.0.1:42288 127.0.0.1:6379 TIME_WAIT -
  494. tcp 0 0 192.168.0.8:60503 78.46.19.144:80 TIME_WAIT -
  495. tcp 0 0 127.0.0.1:37048 127.0.0.1:6379 ESTABLISHED 360/php
  496. tcp 0 0 127.0.0.1:80 127.0.0.1:55069 TIME_WAIT -
  497. tcp 0 0 127.0.0.1:80 127.0.0.1:55253 TIME_WAIT -
  498. tcp 0 0 127.0.0.1:42180 127.0.0.1:6379 TIME_WAIT -
  499. tcp 0 0 127.0.0.1:42289 127.0.0.1:6379 TIME_WAIT -
  500. tcp 0 0 127.0.0.1:80 127.0.0.1:55222 TIME_WAIT -
  501. tcp 0 0 127.0.0.1:42185 127.0.0.1:6379 ESTABLISHED 2295/php
  502. tcp 0 0 127.0.0.1:42225 127.0.0.1:6379 TIME_WAIT -
  503. tcp 0 0 127.0.0.1:42390 127.0.0.1:6379 ESTABLISHED 2403/php
  504. tcp 0 0 127.0.0.1:42293 127.0.0.1:6379 TIME_WAIT -
  505. tcp 0 0 127.0.0.1:42393 127.0.0.1:6379 ESTABLISHED 2401/php
  506. tcp 0 0 127.0.0.1:6379 127.0.0.1:42393 ESTABLISHED 375/redis-server 12
  507. tcp 0 0 127.0.0.1:42368 127.0.0.1:6379 TIME_WAIT -
  508. tcp 0 0 192.168.0.8:80 192.168.0.2:53220 TIME_WAIT -
  509. tcp 0 0 127.0.0.1:42161 127.0.0.1:6379 TIME_WAIT -
  510. tcp 0 0 192.168.0.8:60257 78.46.19.144:80 TIME_WAIT -
  511. tcp 0 0 127.0.0.1:6379 127.0.0.1:37048 ESTABLISHED 375/redis-server 12
  512. tcp 0 0 127.0.0.1:42364 127.0.0.1:6379 TIME_WAIT -
  513. tcp 0 0 127.0.0.1:42234 127.0.0.1:6379 TIME_WAIT -
  514. tcp 0 0 127.0.0.1:42160 127.0.0.1:6379 TIME_WAIT -
  515. tcp 0 0 192.168.0.8:80 192.168.0.2:53225 ESTABLISHED 381/nginx: worker p
  516. tcp 0 0 127.0.0.1:42292 127.0.0.1:6379 TIME_WAIT -
  517. tcp 0 0 127.0.0.1:82 127.0.0.1:53127 TIME_WAIT -
  518. tcp 0 0 127.0.0.1:42378 127.0.0.1:6379 TIME_WAIT -
  519. tcp 0 0 127.0.0.1:42181 127.0.0.1:6379 TIME_WAIT -
  520. tcp 6 0 192.168.0.8:80 192.168.0.2:53226 ESTABLISHED 381/nginx: worker p
  521. tcp 0 0 192.168.0.8:80 192.168.0.2:53221 TIME_WAIT -
  522. tcp 0 0 127.0.0.1:60060 127.0.0.1:6600 TIME_WAIT -
  523. tcp 0 0 127.0.0.1:59878 127.0.0.1:6600 TIME_WAIT -
  524. tcp 0 0 127.0.0.1:42254 127.0.0.1:6379 TIME_WAIT -
  525. tcp 0 0 127.0.0.1:6379 127.0.0.1:42185 ESTABLISHED 375/redis-server 12
  526. tcp 0 0 127.0.0.1:80 127.0.0.1:55032 TIME_WAIT -
  527. tcp 0 0 127.0.0.1:80 127.0.0.1:55292 TIME_WAIT -
  528. tcp 0 0 192.168.0.8:22 192.168.0.2:53032 ESTABLISHED 1411/sshd: root@pts
  529. tcp 0 0 127.0.0.1:42369 127.0.0.1:6379 TIME_WAIT -
  530. tcp 0 0 192.168.0.8:60447 78.46.19.144:80 TIME_WAIT -
  531. tcp 0 0 192.168.0.8:80 192.168.0.2:53218 TIME_WAIT -
  532. tcp 0 0 127.0.0.1:42159 127.0.0.1:6379 TIME_WAIT -
  533. tcp 0 0 127.0.0.1:42233 127.0.0.1:6379 TIME_WAIT -
  534. tcp 0 0 127.0.0.1:82 127.0.0.1:53192 TIME_WAIT -
  535. tcp 0 0 127.0.0.1:80 127.0.0.1:55039 TIME_WAIT -
  536. tcp 0 0 127.0.0.1:80 127.0.0.1:55281 TIME_WAIT -
  537. Active UNIX domain sockets (w/o servers)
  538. Proto RefCnt Flags Type State I-Node PID/Program name Path
  539. unix 2 [ ] DGRAM 73348 2259/wpa_supplicant /var/run/wpa_supplicant/wlan0
  540. unix 2 [ ] DGRAM 2221 1/init /run/systemd/notify
  541. unix 2 [ ] DGRAM 2240 1/init /run/systemd/shutdownd
  542. unix 3 [ ] DGRAM 3231 85/systemd-udevd
  543. unix 3 [ ] STREAM CONNECTED 6952 367/php-fpm: master
  544. unix 3 [ ] STREAM CONNECTED 75037 125/dbus-daemon /run/dbus/system_bus_socket
  545. unix 3 [ ] STREAM CONNECTED 4294 123/avahi-daemon: c
  546. unix 3 [ ] DGRAM 3232 85/systemd-udevd
  547. unix 3 [ ] STREAM CONNECTED 6881 380/nginx: master p
  548. unix 3 [ ] STREAM CONNECTED 4968 125/dbus-daemon
  549. unix 3 [ ] STREAM CONNECTED 6880 380/nginx: master p
  550. unix 3 [ ] STREAM CONNECTED 75004 360/php
  551. unix 3 [ ] STREAM CONNECTED 4191 118/avahi-dnsconfd
  552. unix 3 [ ] STREAM CONNECTED 6879 380/nginx: master p
  553. unix 3 [ ] STREAM CONNECTED 4353 124/rpc.idmapd
  554. unix 3 [ ] STREAM CONNECTED 4293 116/avahi-daemon: r
  555. unix 3 [ ] STREAM CONNECTED 4351 116/avahi-daemon: r
  556. unix 3 [ ] STREAM CONNECTED 6878 380/nginx: master p
  557. unix 3 [ ] STREAM CONNECTED 4398 1/init
  558. unix 3 [ ] STREAM CONNECTED 4967 125/dbus-daemon
  559. unix 3 [ ] STREAM CONNECTED 4972 125/dbus-daemon /run/dbus/system_bus_socket
  560. unix 3 [ ] STREAM CONNECTED 5170 116/avahi-daemon: r /var/run/avahi-daemon/socket
  561. unix 3 [ ] STREAM CONNECTED 4352 124/rpc.idmapd
  562. unix 3 [ ] STREAM CONNECTED 31684 125/dbus-daemon /run/dbus/system_bus_socket
  563. unix 3 [ ] STREAM CONNECTED 75039 2394/mpd /run/mpd.sock
  564. unix 3 [ ] STREAM CONNECTED 6953 367/php-fpm: master
  565. unix 3 [ ] STREAM CONNECTED 4969 125/dbus-daemon /run/dbus/system_bus_socket
  566. unix 3 [ ] STREAM CONNECTED 31683 1396/shairport
  567. unix 3 [ ] STREAM CONNECTED 75036 2394/mpd
  568.  
  569.  
  570. ###### Network interfaces (ip addr) ######
  571. 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default
  572. link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  573. inet 127.0.0.1/8 scope host lo
  574. valid_lft forever preferred_lft forever
  575. 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
  576. link/ether b8:27:eb:61:39:1e brd ff:ff:ff:ff:ff:ff
  577. inet 192.168.0.8/24 brd 192.168.0.255 scope global eth0
  578. valid_lft forever preferred_lft forever
  579. 3: wlan0: mtu 1500 qdisc mq state DOWN group default qlen 1000
  580. link/ether 7c:dd:90:5e:f5:91 brd ff:ff:ff:ff:ff:ff
  581.  
  582.  
  583. ###### Network interfaces (ifconfig) ######
  584. eth0: flags=4163 mtu 1500
  585. inet 192.168.0.8 netmask 255.255.255.0 broadcast 192.168.0.255
  586. ether b8:27:eb:61:39:1e txqueuelen 1000 (Ethernet)
  587. RX packets 5478 bytes 900045 (878.9 KiB)
  588. RX errors 0 dropped 0 overruns 0 frame 0
  589. TX packets 4523 bytes 1874104 (1.7 MiB)
  590. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  591.  
  592. lo: flags=73 mtu 65536
  593. inet 127.0.0.1 netmask 255.0.0.0
  594. loop txqueuelen 0 (Local Loopback)
  595. RX packets 74931 bytes 4351211 (4.1 MiB)
  596. RX errors 0 dropped 0 overruns 0 frame 0
  597. TX packets 74931 bytes 4351211 (4.1 MiB)
  598. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  599.  
  600. wlan0: flags=4099 mtu 1500
  601. ether 7c:dd:90:5e:f5:91 txqueuelen 1000 (Ethernet)
  602. RX packets 0 bytes 0 (0.0 B)
  603. RX errors 0 dropped 0 overruns 0 frame 0
  604. TX packets 0 bytes 0 (0.0 B)
  605. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  606.  
  607.  
  608. ###### Network netctl profiles (netctl list) ######
  609. wlan0
  610. * eth0
  611.  
  612. wlan0 netctl status
  613. --------------------------------------------------------
  614. ● netctl@wlan0.service - Networking for netctl profile wlan0
  615. Loaded: loaded (/usr/lib/systemd/system/netctl@.service; static)
  616. Active: failed (Result: exit-code) since Tue 2014-08-19 01:44:52 UTC; 8min ago
  617. Docs: man:netctl.profile(5)
  618. Process: 1773 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
  619. Main PID: 1773 (code=exited, status=1/FAILURE)
  620.  
  621. wlan0 netctl profile
  622. --------------------------------------------------------
  623. Description='wlan0 connection'
  624. Interface=wlan0
  625. ForceConnect=yes
  626. SkipNoCarrier=yes
  627. Connection=wireless
  628. Security=wpa-config
  629. WPAConfigFile='/etc/wpa_supplicant/wpa_supplicant.conf'
  630. IP=dhcp
  631.  
  632. eth0 netctl status
  633. --------------------------------------------------------
  634. ● netctl@eth0.service - eth0 dhcp connection
  635. Loaded: loaded (/etc/systemd/system/netctl@eth0.service; enabled)
  636. Active: active (exited) since Thu 1970-01-01 00:00:20 UTC; 44 years 7 months ago
  637. Docs: man:netctl.profile(5)
  638. Main PID: 117 (code=exited, status=0/SUCCESS)
  639. CGroup: /system.slice/system-netctl.slice/netctl@eth0.service
  640. └─352 dhcpcd -4qL -t 30 eth0
  641.  
  642. eth0 netctl profile
  643. --------------------------------------------------------
  644. Description='eth0 dhcp connection'
  645. Interface=eth0
  646. Connection=ethernet
  647. ForceConnect=yes
  648. SkipNoCarrier=yes
  649. IP=dhcp
  650.  
  651.  
  652. ###### Network wifi status (iwconfig) ######
  653. lo no wireless extensions.
  654.  
  655. eth0 no wireless extensions.
  656.  
  657. wlan0 IEEE 802.11bgn ESSID:off/any
  658. Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
  659. Retry long limit:7 RTS thr:off Fragment thr:off
  660. Encryption key:off
  661. Power Management:on
  662.  
  663.  
  664. ###### Kernel status (dmesg) ######
  665. [ 0.000000] Booting Linux on physical CPU 0x0
  666. [ 0.000000] Initializing cgroup subsys cpuset
  667. [ 0.000000] Initializing cgroup subsys cpu
  668. [ 0.000000] Initializing cgroup subsys cpuacct
  669. [ 0.000000] Linux version 3.12.19-2-ARCH (root@CS) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 PREEMPT Thu May 22 15:35:00 UTC 2014
  670. [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  671. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  672. [ 0.000000] Machine: BCM2708
  673. [ 0.000000] cma: CMA: reserved 8 MiB at 1b800000
  674. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  675. [ 0.000000] On node 0 totalpages: 114688
  676. [ 0.000000] free_area_init_node: node 0, pgdat c064f190, node_mem_map c06e2000
  677. [ 0.000000] Normal zone: 896 pages used for memmap
  678. [ 0.000000] Normal zone: 0 pages reserved
  679. [ 0.000000] Normal zone: 114688 pages, LIFO batch:31
  680. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  681. [ 0.000000] pcpu-alloc: [0] 0
  682. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
  683. [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0xe bcm2708.serial=0xd361391e smsc95xx.macaddr=B8:27:EB:61:39:1E sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 ipv6.disable=1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 dwc_otg.fiq_split_enable=0 dwc_otg.fiq_fix_enable=0 console=tty1 root=/dev/mmcblk0p5 rootfstype=ext4 elevator=noop usbcore.old_scheme_first=1 coherent_pool=6M rootwait
  684. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  685. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  686. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  687. [ 0.000000] Memory: 439456K/458752K available (4392K kernel code, 282K rwdata, 1564K rodata, 201K init, 562K bss, 19296K reserved)
  688. [ 0.000000] Virtual kernel memory layout:
  689. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  690. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  691. vmalloc : 0xdc800000 - 0xff000000 ( 552 MB)
  692. lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
  693. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  694. .text : 0xc0008000 - 0xc05d9550 (5958 kB)
  695. .init : 0xc05da000 - 0xc060c504 ( 202 kB)
  696. .data : 0xc060e000 - 0xc06548cc ( 283 kB)
  697. .bss : 0xc06548cc - 0xc06e1250 ( 563 kB)
  698. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  699. [ 0.000000] Preemptible hierarchical RCU implementation.
  700. [ 0.000000] NR_IRQS:394
  701. [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  702. [ 0.000000] Switching to timer-based delay loop
  703. [ 0.000000] Console: colour dummy device 80x30
  704. [ 0.000000] console [tty1] enabled
  705. [ 0.000615] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=1000)
  706. [ 0.000640] pid_max: default: 32768 minimum: 301
  707. [ 0.000961] Mount-cache hash table entries: 512
  708. [ 0.001883] Initializing cgroup subsys memory
  709. [ 0.001969] Initializing cgroup subsys devices
  710. [ 0.001988] Initializing cgroup subsys freezer
  711. [ 0.002004] Initializing cgroup subsys blkio
  712. [ 0.002017] Initializing cgroup subsys perf_event
  713. [ 0.002217] CPU: Testing write buffer coherency: ok
  714. [ 0.002648] Setting up static identity map for 0xc042dd80 - 0xc042ddb8
  715. [ 0.004889] devtmpfs: initialized
  716. [ 0.022836] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  717. [ 0.025055] NET: Registered protocol family 16
  718. [ 0.033880] DMA: preallocated 6144 KiB pool for atomic coherent allocations
  719. [ 0.035315] bcm2708.uart_clock = 0
  720. [ 0.037132] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  721. [ 0.037153] hw-breakpoint: maximum watchpoint size is 4 bytes.
  722. [ 0.037167] mailbox: Broadcom VideoCore Mailbox driver
  723. [ 0.037247] bcm2708_vcio: mailbox at f200b880
  724. [ 0.037351] bcm_power: Broadcom power driver
  725. [ 0.037372] bcm_power_open() -> 0
  726. [ 0.037384] bcm_power_request(0, 8)
  727. [ 0.538099] bcm_mailbox_read -> 00000080, 0
  728. [ 0.538119] bcm_power_request -> 0
  729. [ 0.538363] Serial: AMBA PL011 UART driver
  730. [ 0.538535] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
  731. [ 0.563491] bio: create slab at 0
  732. [ 0.564757] SCSI subsystem initialized
  733. [ 0.565160] usbcore: registered new interface driver usbfs
  734. [ 0.565255] usbcore: registered new interface driver hub
  735. [ 0.565531] usbcore: registered new device driver usb
  736. [ 0.567824] Switched to clocksource stc
  737. [ 0.585771] FS-Cache: Loaded
  738. [ 0.586124] CacheFiles: Loaded
  739. [ 0.599551] NET: Registered protocol family 2
  740. [ 0.600712] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  741. [ 0.600922] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  742. [ 0.601026] TCP: Hash tables configured (established 4096 bind 4096)
  743. [ 0.601110] TCP: reno registered
  744. [ 0.601137] UDP hash table entries: 256 (order: 0, 4096 bytes)
  745. [ 0.601169] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  746. [ 0.601631] NET: Registered protocol family 1
  747. [ 0.603687] bcm2708_dma: DMA manager at f2007000
  748. [ 0.603902] bcm2708_gpio: bcm2708_gpio_probe c061b800
  749. [ 0.604389] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
  750. [ 0.777199] VFS: Disk quotas dquot_6.5.2
  751. [ 0.777514] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  752. [ 0.781189] aufs 3.12.x-20140512
  753. [ 0.781248] msgmni has been set to 874
  754. [ 0.784314] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  755. [ 0.784683] io scheduler noop registered (default)
  756. [ 0.784707] io scheduler deadline registered
  757. [ 0.785082] io scheduler cfq registered
  758. [ 0.786202] BCM2708FB: allocated DMA memory 5be00000
  759. [ 0.786269] BCM2708FB: allocated DMA channel 0 @ f2007000
  760. [ 0.792105] Console: switching to colour frame buffer device 82x26
  761. [ 0.794877] uart-pl011 dev:f1: no DMA platform data
  762. [ 0.795523] vc-cma: Videocore CMA driver
  763. [ 0.795542] vc-cma: vc_cma_base = 0x00000000
  764. [ 0.795556] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
  765. [ 0.795567] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  766. [ 0.805768] brd: module loaded
  767. [ 0.811431] loop: module loaded
  768. [ 0.811742] vchiq: vchiq_init_state: slot_zero = 0xdb800000, is_master = 0
  769. [ 0.812925] Loading iSCSI transport class v2.0-870.
  770. [ 0.814220] usbcore: registered new interface driver ax88179_178a
  771. [ 0.814352] usbcore: registered new interface driver smsc95xx
  772. [ 0.814545] usbcore: registered new interface driver cdc_ncm
  773. [ 0.814566] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  774. [ 1.014757] Core Release: 2.80a
  775. [ 1.014789] Setting default values for core params
  776. [ 1.014890] Finished setting default values for core params
  777. [ 1.214958] Using Buffer DMA mode
  778. [ 1.214982] Periodic Transfer Interrupt Enhancement - disabled
  779. [ 1.214995] Multiprocessor Interrupt Enhancement - disabled
  780. [ 1.215010] OTG VER PARAM: 0, OTG VER FLAG: 0
  781. [ 1.215027] Dedicated Tx FIFOs mode
  782. [ 1.215620] WARN::dwc_otg_hcd_init:1042: FIQ DMA bounce buffers: virt = 0xdbe14000 dma = 0x5be14000 len=9024
  783. [ 1.215656] FIQ FSM acceleration enabled for :
  784. Non-periodic Split Transactions
  785. Periodic Split Transactions
  786. High-Speed Isochronous Endpoints
  787. [ 1.215685] dwc_otg: Microframe scheduler enabled
  788. [ 1.215798] WARN::hcd_init:473: FIQ at 0xc032d988
  789. [ 1.215886] WARN::hcd_init:474: FIQ ASM at 0xc032dc3c length 36
  790. [ 1.215919] WARN::hcd_init:500: MPHI regs_base at 0xdc806000
  791. [ 1.215950] dwc_otg bcm2708_usb: DWC OTG Controller
  792. [ 1.216044] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  793. [ 1.216109] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  794. [ 1.216150] Init: Port Power? op_state=1
  795. [ 1.216161] Init: Power Port (0)
  796. [ 1.216493] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  797. [ 1.216520] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  798. [ 1.216539] usb usb1: Product: DWC OTG Controller
  799. [ 1.216555] usb usb1: Manufacturer: Linux 3.12.19-2-ARCH dwc_otg_hcd
  800. [ 1.216571] usb usb1: SerialNumber: bcm2708_usb
  801. [ 1.217393] hub 1-0:1.0: USB hub found
  802. [ 1.217484] hub 1-0:1.0: 1 port detected
  803. [ 1.218093] dwc_otg: FIQ enabled
  804. [ 1.218114] dwc_otg: NAK holdoff enabled
  805. [ 1.218126] dwc_otg: FIQ split-transaction FSM enabled
  806. [ 1.218146] Module dwc_common_port init
  807. [ 1.218591] usbcore: registered new interface driver usb-storage
  808. [ 1.219046] mousedev: PS/2 mouse device common for all mice
  809. [ 1.220085] device-mapper: uevent: version 1.0.3
  810. [ 1.220613] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
  811. [ 1.221340] device-mapper: multipath: version 1.6.0 loaded
  812. [ 1.221368] device-mapper: multipath round-robin: version 1.0.0 loaded
  813. [ 1.221383] device-mapper: multipath queue-length: version 0.1.0 loaded
  814. [ 1.221395] device-mapper: multipath service-time: version 0.2.0 loaded
  815. [ 1.221482] sdhci: Secure Digital Host Controller Interface driver
  816. [ 1.221496] sdhci: Copyright(c) Pierre Ossman
  817. [ 1.221582] sdhci: Enable low-latency mode
  818. [ 1.250882] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
  819. [ 1.251131] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
  820. [ 1.251232] sdhci-pltfm: SDHCI platform and OF driver helper
  821. [ 1.251410] hidraw: raw HID events driver (C) Jiri Kosina
  822. [ 1.251929] usbcore: registered new interface driver usbhid
  823. [ 1.251948] usbhid: USB HID core driver
  824. [ 1.252728] zram: Created 1 device(s) ...
  825. [ 1.253352] TCP: cubic registered
  826. [ 1.253380] Initializing XFRM netlink socket
  827. [ 1.253423] NET: Registered protocol family 17
  828. [ 1.253538] Key type dns_resolver registered
  829. [ 1.260666] registered taskstats version 1
  830. [ 1.261975] Waiting for root device /dev/mmcblk0p5...
  831. [ 1.330265] mmc0: read SD Status register (SSR) after 3 attempts
  832. [ 1.336305] mmc0: new high speed SDHC card at address 0007
  833. [ 1.337013] mmcblk0: mmc0:0007 SD16G 14.9 GiB
  834. [ 1.341276] mmcblk0: p1 p2 < p5 > p3
  835. [ 1.383885] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
  836. [ 1.383982] VFS: Mounted root (ext4 filesystem) on device 179:5.
  837. [ 1.394327] devtmpfs: mounted
  838. [ 1.395046] Freeing unused kernel memory: 200K (c05da000 - c060c000)
  839. [ 1.418067] Indeed it is in host mode hprt0 = 00021501
  840. [ 1.585091] usb 1-1: new high-speed USB device number 2 using dwc_otg
  841. [ 1.596388] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  842. [ 1.596424] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  843. [ 1.597268] hub 1-1:1.0: USB hub found
  844. [ 1.597433] hub 1-1:1.0: 5 ports detected
  845. [ 1.871047] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  846. [ 1.882468] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  847. [ 1.882504] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  848. [ 1.885516] smsc95xx v1.0.4
  849. [ 1.928218] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:61:39:1e
  850. [ 2.001128] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
  851. [ 2.031418] usb 1-1.2: New USB device found, idVendor=148f, idProduct=5370
  852. [ 2.031454] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  853. [ 2.031473] usb 1-1.2: Product: 802.11 n WLAN
  854. [ 2.031489] usb 1-1.2: Manufacturer: Ralink
  855. [ 2.031504] usb 1-1.2: SerialNumber: 1.0
  856. [ 2.108045] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
  857. [ 2.121206] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608
  858. [ 2.121244] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  859. [ 2.121262] usb 1-1.3: Product: USB2.0 Hub
  860. [ 2.122460] hub 1-1.3:1.0: USB hub found
  861. [ 2.122935] hub 1-1.3:1.0: 4 ports detected
  862. [ 2.401378] usb 1-1.3.1: new high-speed USB device number 6 using dwc_otg
  863. [ 2.414356] usb 1-1.3.1: New USB device found, idVendor=05e3, idProduct=0608
  864. [ 2.414393] usb 1-1.3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  865. [ 2.414411] usb 1-1.3.1: Product: USB2.0 Hub
  866. [ 2.415470] hub 1-1.3.1:1.0: USB hub found
  867. [ 2.415976] hub 1-1.3.1:1.0: 4 ports detected
  868. [ 2.492250] usb 1-1.3.2: new high-speed USB device number 7 using dwc_otg
  869. [ 2.544761] usb 1-1.3.2: New USB device found, idVendor=04e8, idProduct=61b5
  870. [ 2.544799] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  871. [ 2.544866] usb 1-1.3.2: Product: Samsung M3 Portable
  872. [ 2.544888] usb 1-1.3.2: Manufacturer: Samsung M3 Portable
  873. [ 2.544906] usb 1-1.3.2: SerialNumber: DE777DE20A0001D7
  874. [ 2.546320] usb-storage 1-1.3.2:1.0: USB Mass Storage device detected
  875. [ 2.547154] scsi0 : usb-storage 1-1.3.2:1.0
  876. [ 2.683358] usb 1-1.3.1.4: new high-speed USB device number 8 using dwc_otg
  877. [ 2.695210] usb 1-1.3.1.4: New USB device found, idVendor=2522, idProduct=0007
  878. [ 2.695247] usb 1-1.3.1.4: New USB device strings: Mfr=1, Product=3, SerialNumber=0
  879. [ 2.695267] usb 1-1.3.1.4: Product: Geek Out HD Audio 1V0
  880. [ 2.695283] usb 1-1.3.1.4: Manufacturer: LH Labs
  881. [ 3.069600] RPC: Registered named UNIX socket transport module.
  882. [ 3.069630] RPC: Registered udp transport module.
  883. [ 3.069643] RPC: Registered tcp transport module.
  884. [ 3.069654] RPC: Registered tcp NFSv4.1 backchannel transport module.
  885. [ 3.326216] FS-Cache: Netfs 'nfs' registered for caching
  886. [ 3.333378] systemd-modules-load[61]: Inserted module 'nfs'
  887. [ 3.550083] scsi 0:0:0:0: Direct-Access Samsung M3 Portable 1404 PQ: 0 ANSI: 6
  888. [ 3.552335] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
  889. [ 3.553036] sd 0:0:0:0: [sda] Write Protect is off
  890. [ 3.553071] sd 0:0:0:0: [sda] Mode Sense: 33 00 00 08
  891. [ 3.553982] sd 0:0:0:0: [sda] No Caching mode page found
  892. [ 3.554015] sd 0:0:0:0: [sda] Assuming drive cache: write through
  893. [ 3.558245] sd 0:0:0:0: [sda] No Caching mode page found
  894. [ 3.558280] sd 0:0:0:0: [sda] Assuming drive cache: write through
  895. [ 5.155030] EXT4-fs (mmcblk0p5): Mount option "nouser_xattr" will be removed by 3.5
  896. Contact linux-ext4@vger.kernel.org if you think we should keep it.
  897.  
  898. [ 5.155102] EXT4-fs (mmcblk0p5): re-mounted. Opts: nouser_xattr,errors=remount-ro
  899. [ 5.178266] bcm2708_rng_init=dc80a000
  900. [ 5.181216] systemd-modules-load[61]: Inserted module 'bcm2708_rng'
  901. [ 5.334664] systemd-modules-load[61]: Inserted module 'snd_bcm2835'
  902. [ 5.510212] systemd-udevd[85]: starting version 212
  903. [ 5.897225] sda: sda1 sda2
  904. [ 5.904371] sd 0:0:0:0: [sda] No Caching mode page found
  905. [ 5.904410] sd 0:0:0:0: [sda] Assuming drive cache: write through
  906. [ 5.904435] sd 0:0:0:0: [sda] Attached SCSI disk
  907. [ 6.306130] bcm2708_i2c_init_pinmode(0,0)
  908. [ 6.306160] bcm2708_i2c_init_pinmode(0,1)
  909. [ 6.320107] bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100k)
  910. [ 6.320253] bcm2708_i2c_init_pinmode(1,2)
  911. [ 6.320271] bcm2708_i2c_init_pinmode(1,3)
  912. [ 6.320724] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100k)
  913. [ 6.358183] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
  914. [ 6.359244] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
  915. [ 6.779912] bcm2708-i2s bcm2708-i2s.0: Failed to create debugfs directory
  916. [ 7.067430] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  917. [ 8.246115] usbcore: registered new interface driver snd-usb-audio
  918. [ 8.295615] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  919. [ 8.377641] cfg80211: Calling CRDA to update world regulatory domain
  920. [ 9.820359] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
  921. [ 9.875166] usb 1-1.2: reset high-speed USB device number 4 using dwc_otg
  922. [ 9.906084] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
  923. [ 10.037601] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
  924. [ 10.040394] cfg80211: Updating information on frequency 2412 MHz with regulatory rule:
  925. [ 10.040426] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  926. [ 10.040443] cfg80211: Updating information on frequency 2417 MHz with regulatory rule:
  927. [ 10.040458] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  928. [ 10.040473] cfg80211: Updating information on frequency 2422 MHz with regulatory rule:
  929. [ 10.040489] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  930. [ 10.040503] cfg80211: Updating information on frequency 2427 MHz with regulatory rule:
  931. [ 10.040517] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  932. [ 10.040531] cfg80211: Updating information on frequency 2432 MHz with regulatory rule:
  933. [ 10.040545] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  934. [ 10.040558] cfg80211: Updating information on frequency 2437 MHz with regulatory rule:
  935. [ 10.040573] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  936. [ 10.040585] cfg80211: Updating information on frequency 2442 MHz with regulatory rule:
  937. [ 10.040600] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  938. [ 10.040615] cfg80211: Updating information on frequency 2447 MHz with regulatory rule:
  939. [ 10.040630] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  940. [ 10.040643] cfg80211: Updating information on frequency 2452 MHz with regulatory rule:
  941. [ 10.040657] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  942. [ 10.040671] cfg80211: Updating information on frequency 2457 MHz with regulatory rule:
  943. [ 10.040685] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  944. [ 10.040698] cfg80211: Updating information on frequency 2462 MHz with regulatory rule:
  945. [ 10.040712] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  946. [ 10.040725] cfg80211: Updating information on frequency 2467 MHz with regulatory rule:
  947. [ 10.040742] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  948. [ 10.040756] cfg80211: Updating information on frequency 2472 MHz with regulatory rule:
  949. [ 10.040770] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  950. [ 10.040783] cfg80211: Updating information on frequency 2484 MHz with regulatory rule:
  951. [ 10.040798] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
  952. [ 10.151413] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  953. [ 10.155290] usbcore: registered new interface driver rt2800usb
  954. [ 27.805356] pcm512x 1-004c: No SCLK, using BCLK: -2
  955. [ 27.806539] pcm512x 1-004c: Completed initialisation - pcm512x_probe
  956. [ 28.201172] snd-rpi-iqaudio-dac snd-rpi-iqaudio-dac.0: pcm512x-hifi <-> bcm2708-i2s.0 mapping ok
  957. [ 44.527350] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  958. [ 44.573659] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  959. [ 46.088004] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
  960. [ 46.114988] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
  961. [ 54.206027] fuse init (API version 7.22)
  962. [ 1141.838942] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 0
  963. [ 1141.839049] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 0
  964. [ 1141.839076] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 10 in queue 0
  965.  
  966. ###### PHP backend ######
  967. php version: 5.5.12
  968. debug level: 0
  969.  
  970.  
  971. Debug data collected in 9.034 seconds.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!