Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- $ dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
- [ 0.000000] BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
- [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
- [ 0.000000] SMBIOS 2.2 present.
- [ 0.000000] DMI: VIA Technologies, Inc. KT333-8235/KT333-8235, BIOS 6.00 PG 09/03/2003
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] last_pfn = 0x2fff0 max_arch_pfn = 0x1000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-C7FFF write-protect
- [ 0.000000] C8000-DFFFF uncachable
- [ 0.000000] E0000-EFFFF write-protect
- [ 0.000000] F0000-FFFFF uncachable
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask FE0000000 write-back
- [ 0.000000] 1 base 020000000 mask FF0000000 write-back
- [ 0.000000] 2 base 0E0000000 mask FF8000000 write-combining
- [ 0.000000] 3 base 0E0000000 mask FF8000000 write-combining
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] found SMP MP-table at [c00f54a0] f54a0
- [ 0.000000] initial memory mapped : 0 - 01a00000
- [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
- [ 0.000000] init_memory_mapping: 0000000000000000-000000002fff0000
- [ 0.000000] 0000000000 - 0000200000 page 4k
- [ 0.000000] 0000200000 - 002fe00000 page 2M
- [ 0.000000] 002fe00000 - 002fff0000 page 4k
- [ 0.000000] kernel direct mapping tables up to 2fff0000 @ 19f9000-1a00000
- [ 0.000000] RAMDISK: 2ebeb000 - 2f5eb000
- [ 0.000000] ACPI: RSDP 000f6f60 00014 (v00 VKT333)
- [ 0.000000] ACPI: RSDT 2fff3000 0002C (v01 VKT333 AWRDACPI 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: FACP 2fff3040 00074 (v01 VKT333 AWRDACPI 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: DSDT 2fff30c0 03E82 (v01 VKT333 AWRDACPI 00001000 MSFT 0100000D)
- [ 0.000000] ACPI: FACS 2fff0000 00040
- [ 0.000000] ACPI: APIC 2fff6f80 00054 (v01 VKT333 AWRDACPI 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 0MB HIGHMEM available.
- [ 0.000000] 767MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 2fff0000
- [ 0.000000] low ram: 0 - 2fff0000
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x0002fff0
- [ 0.000000] HighMem empty
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x0002fff0
- [ 0.000000] On node 0 totalpages: 196479
- [ 0.000000] free_area_init_node: node 0, pgdat c1412740, node_mem_map ef9ef200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1504 pages used for memmap
- [ 0.000000] Normal zone: 190992 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:cec00000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @ef9db000 s33280 r0 d24064 u57344
- [ 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194943
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=ba733363-b9b9-4c16-8afb-611f4aed303a ro quiet
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
- [ 0.000000] Memory: 763420k/786368k available (2852k kernel code, 22496k reserved, 1347k data, 416k init, 0k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
- [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
- [ 0.000000] vmalloc : 0xf07f0000 - 0xff9fe000 ( 242 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
- [ 0.000000] .init : 0xc141b000 - 0xc1483000 ( 416 kB)
- [ 0.000000] .data : 0xc12c93c0 - 0xc141a100 (1347 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc12c93c0 (2852 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:2304 nr_irqs:256 16
- [ 0.000000] CPU 0 irqstacks, hard=ee406000 soft=ee408000
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1620.306 MHz processor.
- [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3240.61 BogoMIPS (lpj=6481224)
- [ 0.004012] pid_max: default: 32768 minimum: 301
- [ 0.004090] Security Framework initialized
- [ 0.004102] AppArmor: AppArmor disabled by boot time parameter
- [ 0.004129] Mount-cache hash table entries: 512
- [ 0.004380] Initializing cgroup subsys cpuacct
- [ 0.004392] Initializing cgroup subsys memory
- [ 0.004409] Initializing cgroup subsys devices
- [ 0.004415] Initializing cgroup subsys freezer
- [ 0.004419] Initializing cgroup subsys net_cls
- [ 0.004423] Initializing cgroup subsys blkio
- [ 0.004435] Initializing cgroup subsys perf_event
- [ 0.004490] mce: CPU supports 4 MCE banks
- [ 0.004556] SMP alternatives: switching to UP code
- [ 0.010029] Freeing SMP alternatives: 8k freed
- [ 0.010053] ACPI: Core revision 20110623
- [ 0.013874] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.015200] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.054918] CPU0: AMD Duron(tm) processor stepping 01
- [ 0.056003] Performance Events: AMD PMU driver.
- [ 0.056003] ... version: 0
- [ 0.056003] ... bit width: 48
- [ 0.056003] ... generic registers: 4
- [ 0.056003] ... value mask: 0000ffffffffffff
- [ 0.056003] ... max period: 00007fffffffffff
- [ 0.056003] ... fixed-purpose events: 0
- [ 0.056003] ... event mask: 000000000000000f
- [ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.056003] Brought up 1 CPUs
- [ 0.056003] Total of 1 processors activated (3240.61 BogoMIPS).
- [ 0.056003] devtmpfs: initialized
- [ 0.056003] PM: Registering ACPI NVS region at 2fff0000 (12288 bytes)
- [ 0.056003] print_constraints: dummy:
- [ 0.056003] NET: Registered protocol family 16
- [ 0.056003] ACPI: bus type pci registered
- [ 0.056003] PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=1
- [ 0.056003] PCI: Using configuration type 1 for base access
- [ 0.057231] bio: create slab <bio-0> at 0
- [ 0.057422] ACPI: Added _OSI(Module Device)
- [ 0.057427] ACPI: Added _OSI(Processor Device)
- [ 0.057431] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.057435] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.058438] ACPI: EC: Look up EC in DSDT
- [ 0.063538] ACPI: Interpreter enabled
- [ 0.063556] ACPI: (supports S0 S1 S4 S5)
- [ 0.063589] ACPI: Using IOAPIC for interrupt routing
- [ 0.069654] ACPI: No dock devices found.
- [ 0.069661] HEST: Table not found.
- [ 0.069670] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
- [ 0.069808] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.070049] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- [ 0.070055] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x3fff] (ignored)
- [ 0.070061] pci_root PNP0A03:00: host bridge window [io 0x4100-0x4fff] (ignored)
- [ 0.070066] pci_root PNP0A03:00: host bridge window [io 0x5010-0xffff] (ignored)
- [ 0.070071] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- [ 0.070076] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
- [ 0.070081] pci_root PNP0A03:00: host bridge window [mem 0x30000000-0xfebfffff] (ignored)
- [ 0.070110] pci 0000:00:00.0: [1106:3099] type 0 class 0x000600
- [ 0.070125] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
- [ 0.070223] pci 0000:00:01.0: [1106:b099] type 1 class 0x000604
- [ 0.070278] pci 0000:00:01.0: supports D1
- [ 0.070314] pci 0000:00:0c.0: [13f0:0200] type 0 class 0x000200
- [ 0.070334] pci 0000:00:0c.0: reg 10: [io 0xd000-0xd07f]
- [ 0.070385] pci 0000:00:0c.0: reg 30: [mem 0x00000000-0x0000ffff pref]
- [ 0.070415] pci 0000:00:0c.0: supports D1 D2
- [ 0.070419] pci 0000:00:0c.0: PME# supported from D1 D2 D3hot D3cold
- [ 0.070452] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
- [ 0.070503] pci 0000:00:10.0: reg 20: [io 0xd400-0xd41f]
- [ 0.070548] pci 0000:00:10.0: supports D1 D2
- [ 0.070552] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.070579] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
- [ 0.070629] pci 0000:00:10.1: reg 20: [io 0xd800-0xd81f]
- [ 0.070674] pci 0000:00:10.1: supports D1 D2
- [ 0.070678] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.070706] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
- [ 0.070757] pci 0000:00:10.2: reg 20: [io 0xdc00-0xdc1f]
- [ 0.070802] pci 0000:00:10.2: supports D1 D2
- [ 0.070805] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.070832] pci 0000:00:10.3: [1106:3104] type 0 class 0x000c03
- [ 0.070851] pci 0000:00:10.3: reg 10: [mem 0xea010000-0xea0100ff]
- [ 0.070928] pci 0000:00:10.3: supports D1 D2
- [ 0.070931] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.070965] pci 0000:00:11.0: [1106:3177] type 0 class 0x000601
- [ 0.071034] HPET not enabled in BIOS. You might try hpet=force boot option
- [ 0.071046] pci 0000:00:11.0: quirk: [io 0x4000-0x407f] claimed by vt8235 PM
- [ 0.071052] pci 0000:00:11.0: quirk: [io 0x5000-0x500f] claimed by vt8235 SMB
- [ 0.071101] pci 0000:00:11.1: [1106:0571] type 0 class 0x000101
- [ 0.071154] pci 0000:00:11.1: reg 20: [io 0xe000-0xe00f]
- [ 0.071229] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
- [ 0.071249] pci 0000:00:11.5: reg 10: [io 0xe400-0xe4ff]
- [ 0.071329] pci 0000:00:11.5: supports D1 D2
- [ 0.071355] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
- [ 0.071375] pci 0000:00:12.0: reg 10: [io 0xec00-0xecff]
- [ 0.071388] pci 0000:00:12.0: reg 14: [mem 0xea011000-0xea0110ff]
- [ 0.071458] pci 0000:00:12.0: supports D1 D2
- [ 0.071461] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.071531] pci 0000:01:00.0: [10de:0322] type 0 class 0x000300
- [ 0.071549] pci 0000:01:00.0: reg 10: [mem 0xe8000000-0xe8ffffff]
- [ 0.071560] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff pref]
- [ 0.071595] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
- [ 0.071664] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.071673] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xe9ffffff]
- [ 0.071680] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
- [ 0.071691] pci_bus 0000:00: on NUMA node 0
- [ 0.071698] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.072248] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
- [ 0.088316] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
- [ 0.088467] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
- [ 0.088614] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
- [ 0.088762] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
- [ 0.088899] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
- [ 0.089026] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
- [ 0.089178] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
- [ 0.089306] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
- [ 0.089617] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.089623] vgaarb: loaded
- [ 0.089626] vgaarb: bridge control possible 0000:01:00.0
- [ 0.089733] PCI: Using ACPI for IRQ routing
- [ 0.089742] PCI: pci_cache_line_size set to 32 bytes
- [ 0.089812] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
- [ 0.089818] reserve RAM buffer: 000000002fff0000 - 000000002fffffff
- [ 0.093892] pnp: PnP ACPI init
- [ 0.093939] ACPI: bus type pnp registered
- [ 0.094258] pnp 00:00: [mem 0x000d0000-0x000d3fff]
- [ 0.094265] pnp 00:00: [mem 0x000f0000-0x000f7fff]
- [ 0.094269] pnp 00:00: [mem 0x000f8000-0x000fbfff]
- [ 0.094274] pnp 00:00: [mem 0x000fc000-0x000fffff]
- [ 0.094278] pnp 00:00: [mem 0x2fff0000-0x2fffffff]
- [ 0.094282] pnp 00:00: [mem 0xffff0000-0xffffffff]
- [ 0.094286] pnp 00:00: [mem 0x00000000-0x0009ffff]
- [ 0.094290] pnp 00:00: [mem 0x00100000-0x2ffeffff]
- [ 0.094294] pnp 00:00: [mem 0xfec00000-0xfec00fff]
- [ 0.094298] pnp 00:00: [mem 0xfee00000-0xfee00fff]
- [ 0.094302] pnp 00:00: [mem 0xfff80000-0xfffeffff]
- [ 0.094421] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
- [ 0.094428] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
- [ 0.094434] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
- [ 0.094439] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
- [ 0.094444] system 00:00: [mem 0x2fff0000-0x2fffffff] could not be reserved
- [ 0.094450] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
- [ 0.094455] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.094461] system 00:00: [mem 0x00100000-0x2ffeffff] could not be reserved
- [ 0.094466] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.094471] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.094477] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
- [ 0.094485] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.094593] pnp 00:01: [bus 00-ff]
- [ 0.094599] pnp 00:01: [io 0x0cf8-0x0cff]
- [ 0.094604] pnp 00:01: [io 0x0000-0x0cf7 window]
- [ 0.094608] pnp 00:01: [io 0x0d00-0x3fff window]
- [ 0.094612] pnp 00:01: [io 0x4000-0x407f]
- [ 0.094616] pnp 00:01: [io 0x4080-0x40ff]
- [ 0.094620] pnp 00:01: [io 0x4100-0x4fff window]
- [ 0.094624] pnp 00:01: [io 0x5000-0x500f]
- [ 0.094628] pnp 00:01: [io 0x5010-0xffff window]
- [ 0.094632] pnp 00:01: [mem 0x000a0000-0x000bffff window]
- [ 0.094637] pnp 00:01: [mem 0x000c0000-0x000dffff window]
- [ 0.094641] pnp 00:01: [mem 0x30000000-0xfebfffff window]
- [ 0.094746] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
- [ 0.095060] pnp 00:02: [io 0x0010-0x001f]
- [ 0.095065] pnp 00:02: [io 0x0022-0x003f]
- [ 0.095069] pnp 00:02: [io 0x0044-0x005f]
- [ 0.095073] pnp 00:02: [io 0x0062-0x0063]
- [ 0.095077] pnp 00:02: [io 0x0065-0x006f]
- [ 0.095080] pnp 00:02: [io 0x0074-0x007f]
- [ 0.095088] pnp 00:02: [io 0x0091-0x0093]
- [ 0.095092] pnp 00:02: [io 0x00a2-0x00bf]
- [ 0.095095] pnp 00:02: [io 0x00e0-0x00ef]
- [ 0.095099] pnp 00:02: [io 0x04d0-0x04d1]
- [ 0.095103] pnp 00:02: [io 0x0800-0x0805]
- [ 0.095217] system 00:02: [io 0x04d0-0x04d1] has been reserved
- [ 0.095223] system 00:02: [io 0x0800-0x0805] has been reserved
- [ 0.095230] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.095256] pnp 00:03: [dma 4]
- [ 0.095261] pnp 00:03: [io 0x0000-0x000f]
- [ 0.095265] pnp 00:03: [io 0x0080-0x0090]
- [ 0.095269] pnp 00:03: [io 0x0094-0x009f]
- [ 0.095272] pnp 00:03: [io 0x00c0-0x00df]
- [ 0.095330] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.095352] pnp 00:04: [io 0x0070-0x0073]
- [ 0.095376] pnp 00:04: [irq 8]
- [ 0.095442] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.095461] pnp 00:05: [io 0x0061]
- [ 0.095529] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.095548] pnp 00:06: [io 0x00f0-0x00ff]
- [ 0.095558] pnp 00:06: [irq 13]
- [ 0.095617] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.095859] pnp 00:07: [io 0x03f0-0x03f5]
- [ 0.095864] pnp 00:07: [io 0x03f7]
- [ 0.095876] pnp 00:07: [irq 6]
- [ 0.095880] pnp 00:07: [dma 2]
- [ 0.096053] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
- [ 0.096356] pnp 00:08: [io 0x03f8-0x03ff]
- [ 0.096373] pnp 00:08: [irq 4]
- [ 0.096520] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.096812] pnp 00:09: [io 0x02f8-0x02ff]
- [ 0.096826] pnp 00:09: [irq 3]
- [ 0.096958] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.097517] pnp 00:0a: [io 0x0378-0x037f]
- [ 0.097522] pnp 00:0a: [io 0x0778-0x077b]
- [ 0.097535] pnp 00:0a: [irq 7]
- [ 0.097539] pnp 00:0a: [dma 3]
- [ 0.097692] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
- [ 0.097793] pnp 00:0b: [io 0x0060]
- [ 0.097797] pnp 00:0b: [io 0x0064]
- [ 0.097810] pnp 00:0b: [irq 12]
- [ 0.097890] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
- [ 0.097981] pnp: PnP ACPI: found 12 devices
- [ 0.097986] ACPI: ACPI bus type pnp unregistered
- [ 0.097994] PnPBIOS: Disabled by ACPI PNP
- [ 0.136518] Switching to clocksource acpi_pm
- [ 0.136562] PCI: max bus depth: 1 pci_try_num: 2
- [ 0.136605] pci 0000:00:0c.0: BAR 6: assigned [mem 0x30000000-0x3000ffff pref]
- [ 0.136614] pci 0000:01:00.0: BAR 6: assigned [mem 0xe9000000-0xe901ffff pref]
- [ 0.136619] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.136628] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xe9ffffff]
- [ 0.136635] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
- [ 0.136656] pci 0000:00:01.0: setting latency timer to 64
- [ 0.136663] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
- [ 0.136667] pci_bus 0000:00: resource 1 [mem 0x00000000-0x3ffffffff]
- [ 0.136672] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe9ffffff]
- [ 0.136676] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
- [ 0.136785] NET: Registered protocol family 2
- [ 0.136914] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.137662] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.139878] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.140606] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.140613] TCP reno registered
- [ 0.140624] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.140668] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.140913] NET: Registered protocol family 1
- [ 0.140945] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
- [ 0.141283] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
- [ 0.141289] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
- [ 0.141459] pci 0000:01:00.0: Boot video device
- [ 0.141464] PCI: CLS 32 bytes, default 32
- [ 0.141588] Unpacking initramfs...
- [ 0.642306] Freeing initrd memory: 10240k freed
- [ 0.664550] audit: initializing netlink socket (disabled)
- [ 0.664583] type=2000 audit(1391683820.664:1): initialized
- [ 0.686083] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.686727] VFS: Disk quotas dquot_6.5.2
- [ 0.686790] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.686941] msgmni has been set to 1511
- [ 0.687324] alg: No test for stdrng (krng)
- [ 0.687414] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.687421] io scheduler noop registered
- [ 0.687424] io scheduler deadline registered
- [ 0.687438] io scheduler cfq registered (default)
- [ 0.687650] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.687697] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.687701] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.688441] ERST: Table is not found!
- [ 0.688446] GHES: HEST is not enabled!
- [ 0.688470] isapnp: Scanning for PnP cards...
- [ 1.042315] isapnp: No Plug & Play device found
- [ 1.042501] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 1.062922] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 1.083351] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 1.104174] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 1.124686] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 1.125079] Linux agpgart interface v0.103
- [ 1.125311] agpgart: Detected VIA KT266/KY266x/KT333 chipset
- [ 1.134720] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
- [ 1.134943] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
- [ 1.134949] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
- [ 1.135505] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.135524] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 1.135811] mousedev: PS/2 mouse device common for all mice
- [ 1.135917] rtc_cmos 00:04: RTC can wake from S4
- [ 1.136199] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- [ 1.136259] rtc0: alarms up to one year, y3k, 242 bytes nvram
- [ 1.136289] cpuidle: using governor ladder
- [ 1.136293] cpuidle: using governor menu
- [ 1.136704] TCP cubic registered
- [ 1.136749] NET: Registered protocol family 10
- [ 1.137627] Mobile IPv6
- [ 1.137637] NET: Registered protocol family 17
- [ 1.137646] Registering the dns_resolver key type
- [ 1.137702] Using IPI No-Shortcut mode
- [ 1.137970] PM: Hibernation image not present or could not be loaded.
- [ 1.137994] registered taskstats version 1
- [ 1.138552] rtc_cmos 00:04: setting system clock to 2014-02-06 10:50:21 UTC (1391683821)
- [ 1.138627] Initializing network drop monitor service
- [ 1.138875] Freeing unused kernel memory: 416k freed
- [ 1.139778] Write protecting the kernel text: 2856k
- [ 1.139831] Write protecting the kernel read-only data: 1084k
- [ 1.180459] udevd[44]: starting version 175
- [ 1.260682] sundance.c:v1.2 11-Sep-2006 Written by Donald Becker
- [ 1.261950] eth0: IC Plus Corporation IP100A FAST Ethernet Adapter at 0001d000, ff:ff:ff:ff:ff:ff, IRQ 16.
- [ 1.262351] eth0: MII PHY found at address 0, status 0x7849 advertising 01e1.
- [ 1.566585] Override speed=100, Full duplex
- [ 1.580082] ACPI: Fan [FAN] (on)
- [ 1.628318] thermal LNXTHERM:00: registered as thermal_zone0
- [ 1.628326] ACPI: Thermal Zone [THRM] (40 C)
- [ 1.684138] Refined TSC clocksource calibration: 1619.999 MHz.
- [ 1.684153] Switching to clocksource tsc
- [ 1.708714] usbcore: registered new interface driver usbfs
- [ 1.708778] usbcore: registered new interface driver hub
- [ 1.720186] usbcore: registered new device driver usb
- [ 1.721454] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.730167] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.749253] Floppy drive(s): fd0 is 1.44M
- [ 1.769273] FDC 0 is a post-1991 82077
- [ 1.774190] SCSI subsystem initialized
- [ 1.823353] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
- [ 1.823363] via_rhine: Broken BIOS detected, avoid_D3 enabled
- [ 1.848618] libata version 3.00 loaded.
- [ 1.981922] ehci_hcd 0000:00:10.3: EHCI Host Controller
- [ 1.982009] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
- [ 1.982126] ehci_hcd 0000:00:10.3: irq 21, io mem 0xea010000
- [ 1.992030] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
- [ 1.992120] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.992126] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.992131] usb usb1: Product: EHCI Host Controller
- [ 1.992134] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
- [ 1.992138] usb usb1: SerialNumber: 0000:00:10.3
- [ 1.992450] hub 1-0:1.0: USB hub found
- [ 1.992462] hub 1-0:1.0: 6 ports detected
- [ 1.994293] uhci_hcd 0000:00:10.0: UHCI Host Controller
- [ 1.994332] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
- [ 1.994378] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
- [ 1.994470] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.994475] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.994480] usb usb2: Product: UHCI Host Controller
- [ 1.994483] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
- [ 1.994487] usb usb2: SerialNumber: 0000:00:10.0
- [ 1.994804] hub 2-0:1.0: USB hub found
- [ 1.994816] hub 2-0:1.0: 2 ports detected
- [ 1.994999] uhci_hcd 0000:00:10.1: UHCI Host Controller
- [ 1.995021] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
- [ 1.995061] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
- [ 1.995152] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.995158] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.995162] usb usb3: Product: UHCI Host Controller
- [ 1.995166] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
- [ 1.995170] usb usb3: SerialNumber: 0000:00:10.1
- [ 1.998614] hub 3-0:1.0: USB hub found
- [ 1.998629] hub 3-0:1.0: 2 ports detected
- [ 1.999131] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
- [ 1.999138] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
- [ 2.012925] via-rhine 0000:00:12.0: eth1: VIA Rhine II at 0x1ec00, 00:0a:e6:73:8d:82, IRQ 23
- [ 2.013636] via-rhine 0000:00:12.0: eth1: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1
- [ 2.013692] pata_via 0000:00:11.1: version 0.3.4
- [ 2.014024] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
- [ 2.014031] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
- [ 2.019320] scsi0 : pata_via
- [ 2.019840] scsi1 : pata_via
- [ 2.022375] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
- [ 2.022383] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
- [ 2.022795] uhci_hcd 0000:00:10.2: UHCI Host Controller
- [ 2.022847] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
- [ 2.022893] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
- [ 2.022990] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.022996] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.023001] usb usb4: Product: UHCI Host Controller
- [ 2.023004] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
- [ 2.023008] usb usb4: SerialNumber: 0000:00:10.2
- [ 2.023334] hub 4-0:1.0: USB hub found
- [ 2.023347] hub 4-0:1.0: 2 ports detected
- [ 2.304021] usb 1-2: new high-speed USB device number 2 using ehci_hcd
- [ 2.368456] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.00, max UDMA/66
- [ 2.368467] ata1.01: ATAPI: LITE-ON DVDRW SOHW-1653S, CS02, max UDMA/66
- [ 2.368476] ata1.00: limited to UDMA/33 due to 40-wire cable
- [ 2.368481] ata1.01: limited to UDMA/33 due to 40-wire cable
- [ 2.384364] ata1.00: configured for UDMA/33
- [ 2.400230] ata1.01: configured for UDMA/33
- [ 2.403394] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H58N 1.00 PQ: 0 ANSI: 5
- [ 2.405238] scsi 0:0:1:0: CD-ROM LITE-ON DVDRW SOHW-1653S CS02 PQ: 0 ANSI: 5
- [ 2.438157] usb 1-2: New USB device found, idVendor=048d, idProduct=9135
- [ 2.438166] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.622166] ata2.00: HPA detected: current 312579695, native 312581808
- [ 2.622180] ata2.00: ATA-7: ST3160212ACE, 3.ACB, max UDMA/100
- [ 2.622185] ata2.00: 312579695 sectors, multi 0: LBA48
- [ 2.622199] ata2.00: limited to UDMA/33 due to 40-wire cable
- [ 2.688711] ata2.00: configured for UDMA/33
- [ 2.689006] scsi 1:0:0:0: Direct-Access ATA ST3160212ACE 3.AC PQ: 0 ANSI: 5
- [ 2.726498] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 2.726509] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 2.727669] sr 0:0:0:0: Attached scsi CD-ROM sr0
- [ 2.732218] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
- [ 2.732557] sr 0:0:1:0: Attached scsi CD-ROM sr1
- [ 2.733972] sd 1:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
- [ 2.734073] sd 1:0:0:0: [sda] Write Protect is off
- [ 2.734080] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.734121] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.738356] sr 0:0:0:0: Attached scsi generic sg0 type 5
- [ 2.738651] sr 0:0:1:0: Attached scsi generic sg1 type 5
- [ 2.738938] sd 1:0:0:0: Attached scsi generic sg2 type 0
- [ 2.815709] sda: sda1 sda2 < sda5 >
- [ 2.817026] sd 1:0:0:0: [sda] Attached SCSI disk
- [ 2.872063] usb 3-1: new low-speed USB device number 2 using uhci_hcd
- [ 3.049971] usb 3-1: New USB device found, idVendor=046d, idProduct=c31d
- [ 3.049980] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.049985] usb 3-1: Product: USB Keyboard
- [ 3.049988] usb 3-1: Manufacturer: Logitech
- [ 3.118763] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input0
- [ 3.120939] generic-usb 0003:046D:C31D.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:10.1-1/input0
- [ 3.158181] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.1/input/input1
- [ 3.158591] generic-usb 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:10.1-1/input1
- [ 3.158656] usbcore: registered new interface driver usbhid
- [ 3.158660] usbhid: USB HID core driver
- [ 3.320002] microcode: CPU0: family 6 not supported
- [ 3.321510] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 3.397998] PM: Starting manual resume from disk
- [ 3.398012] PM: Hibernation image partition 8:5 present
- [ 3.398015] PM: Looking for hibernation image.
- [ 3.439930] PM: Image not found (code -22)
- [ 3.439936] PM: Hibernation image not present or could not be loaded.
- [ 3.483999] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
- [ 3.484067] EXT4-fs (sda1): write access will be enabled during recovery
- [ 8.907423] EXT4-fs (sda1): orphan cleanup on readonly fs
- [ 8.907465] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7995420
- [ 8.907682] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7995418
- [ 8.907712] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7995416
- [ 8.907745] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 9315090
- [ 8.908416] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8525662
- [ 8.908512] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8525948
- [ 8.908560] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8525588
- [ 8.908613] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8520408
- [ 8.908721] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8526854
- [ 8.922937] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651195
- [ 8.923033] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651196
- [ 8.923065] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651236
- [ 8.923141] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651202
- [ 8.923177] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651210
- [ 8.923204] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651205
- [ 8.923231] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651260
- [ 8.923259] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651221
- [ 8.923287] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651245
- [ 8.923314] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651229
- [ 8.923353] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651225
- [ 8.923380] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651217
- [ 8.923415] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651197
- [ 8.923451] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651226
- [ 8.923477] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651254
- [ 8.923502] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651209
- [ 8.923528] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651253
- [ 8.923565] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651216
- [ 8.923592] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651242
- [ 8.923618] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651244
- [ 8.923643] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651256
- [ 8.923669] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651208
- [ 8.923694] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651257
- [ 8.923719] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651218
- [ 8.923757] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 9442044
- [ 8.923897] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651267
- [ 8.923926] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8651266
- [ 8.923955] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7995414
- [ 8.924107] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7995403
- [ 8.924126] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7995402
- [ 8.924140] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7995401
- [ 8.924171] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7995400
- [ 8.924185] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7995399
- [ 8.924197] EXT4-fs (sda1): 42 orphan inodes deleted
- [ 8.924201] EXT4-fs (sda1): recovery complete
- [ 9.150277] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 12.462553] udevd[328]: starting version 175
- [ 13.071149] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
- [ 13.071164] ACPI: Power Button [PWRB]
- [ 13.071288] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
- [ 13.071296] ACPI: Sleep Button [SLPB]
- [ 13.071442] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
- [ 13.071448] ACPI: Power Button [PWRF]
- [ 13.087429] Marking TSC unstable due to TSC halts in idle
- [ 13.087451] ACPI: acpi_idle registered with cpuidle
- [ 13.095161] Switching to clocksource acpi_pm
- [ 13.145040] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 13.180660] parport_pc 00:0a: reported by Plug and Play ACPI
- [ 13.180765] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
- [ 13.684065] NET: Registered protocol family 23
- [ 13.922089] input: PC Speaker as /devices/platform/pcspkr/input/input5
- [ 14.261634] [drm] Initialized drm 1.1.0 20060810
- [ 14.545890] wmi: Mapper loaded
- [ 14.693090] [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x034200b1)
- [ 14.694809] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
- [ 14.730301] [drm] nouveau 0000:01:00.0: ... appears to be valid
- [ 14.730310] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
- [ 14.731686] [drm] nouveau 0000:01:00.0: BMP BIOS found
- [ 14.731690] [drm] nouveau 0000:01:00.0: BMP version 5.39
- [ 14.731696] [drm] nouveau 0000:01:00.0: Bios version 04.34.20.27
- [ 14.735884] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
- [ 14.735896] [drm] nouveau 0000:01:00.0: DCB version 2.2
- [ 14.735903] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 000088b8
- [ 14.735909] [drm] nouveau 0000:01:00.0: DCB outp 01: 02010310 000088b8
- [ 14.735914] [drm] nouveau 0000:01:00.0: DCB outp 02: 01010312 00000000
- [ 14.735918] [drm] nouveau 0000:01:00.0: DCB outp 03: 02020321 00000003
- [ 14.736951] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
- [ 14.736960] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE5D9
- [ 14.737009] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE7EA
- [ 14.737021] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE930
- [ 14.737064] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEAB6
- [ 14.737072] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEAD3
- [ 14.737079] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xEAF0
- [ 14.785448] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xEC74
- [ 14.786403] [TTM] Zone kernel: Available graphics memory: 387042 kiB
- [ 14.786410] [TTM] Initializing pool allocator
- [ 14.786422] [TTM] Initializing DMA pool allocator
- [ 14.786452] [drm] nouveau 0000:01:00.0: Detected 128MiB VRAM (DDR1)
- [ 14.786684] agpgart-via 0000:00:00.0: AGP 2.0 bridge
- [ 14.786719] agpgart-via 0000:00:00.0: putting AGP V2 device into 2x mode
- [ 14.786785] nouveau 0000:01:00.0: putting AGP V2 device into 2x mode
- [ 14.786791] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture)
- [ 14.786970] [drm] nouveau 0000:01:00.0: Saving VGA fonts
- [ 14.828924] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 14.828934] [drm] No driver support for vblank timestamp query.
- [ 14.837728] [drm] nouveau 0000:01:00.0: 0 available performance level(s)
- [ 14.837739] [drm] nouveau 0000:01:00.0: c: core 249MHz memory 330MHz
- [ 14.840399] [drm] nouveau 0000:01:00.0: 0xDB7C: Parsing digital output script table
- [ 14.841015] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
- [ 14.950492] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ef1d3600
- [ 14.950921] fbcon: nouveaufb (fb0) is primary device
- [ 14.952165] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input6
- [ 14.978402] Console: switching to colour frame buffer device 160x64
- [ 14.979972] fb0: nouveaufb frame buffer device
- [ 14.979976] drm: registered panic notifier
- [ 14.979991] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
- [ 15.395507] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
- [ 15.395517] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
- [ 15.395741] snd_via82xx 0000:00:11.5: setting latency timer to 64
- [ 15.539818] WARNING: You are using an experimental version of the media stack.
- [ 15.539825] As the driver is backported to an older kernel, it doesn't offer
- [ 15.539827] enough quality for its usage in production.
- [ 15.539829] Use it with care.
- [ 15.539830] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
- [ 15.539833] 261cb200e7227820cd0056435d7c1a3a9c476766 [media] af9035: add ID [2040:f900] Hauppauge WinTV-MiniStick 2
- [ 15.539835] dee88f4378d18b4e7ebca22c82dab2ed5dfd178c [media] nuvoton-cir: Don't touch PS/2 interrupts while initializing
- [ 15.539838] 8d2b022911c2fa72085df39921dc5cd963bc159f [media] cx23885: Fix tuning regression for TeVii S471
- [ 15.551429] WARNING: You are using an experimental version of the media stack.
- [ 15.551435] As the driver is backported to an older kernel, it doesn't offer
- [ 15.551438] enough quality for its usage in production.
- [ 15.551440] Use it with care.
- [ 15.551441] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
- [ 15.551443] 261cb200e7227820cd0056435d7c1a3a9c476766 [media] af9035: add ID [2040:f900] Hauppauge WinTV-MiniStick 2
- [ 15.551446] dee88f4378d18b4e7ebca22c82dab2ed5dfd178c [media] nuvoton-cir: Don't touch PS/2 interrupts while initializing
- [ 15.551449] 8d2b022911c2fa72085df39921dc5cd963bc159f [media] cx23885: Fix tuning regression for TeVii S471
- [ 15.649647] it913x: Chip Version=02 Chip Type=9135
- [ 15.650016] it913x: Firmware Version 50594048
- [ 15.650390] it913x: Dual mode=0 Tuner Type=38
- [ 15.650394] it913x: Unknown tuner ID applying default 0x60
- [ 15.650403] usb 1-2: dvb_usb_v2: found a 'ITE 9135 Generic' in warm state
- [ 15.651771] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
- [ 15.653929] DVB: registering new adapter (ITE 9135 Generic)
- [ 15.725683] it913x-fe: ADF table value :00
- [ 15.729517] it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 01
- [ 15.766243] it913x-fe: Tuner LNA type :60
- [ 15.909323] usb 1-2: DVB: registering adapter 0 frontend 0 (ITE 9135 Generic_1)...
- [ 15.996072] Registered IR keymap rc-it913x-v1
- [ 15.996335] input: ITE 9135 Generic as /devices/pci0000:00/0000:00:10.3/usb1/1-2/rc/rc0/input7
- [ 15.997960] rc0: ITE 9135 Generic as /devices/pci0000:00/0000:00:10.3/usb1/1-2/rc/rc0
- [ 15.997975] usb 1-2: dvb_usb_v2: schedule remote query interval to 250 msecs
- [ 15.997985] usb 1-2: dvb_usb_v2: 'ITE 9135 Generic' successfully initialized and connected
- [ 15.998038] usbcore: registered new interface driver dvb_usb_it913x
- [ 18.527794] Adding 1568764k swap on /dev/sda5. Priority:-1 extents:1 across:1568764k
- [ 18.545895] EXT4-fs (sda1): re-mounted. Opts: (null)
- [ 18.940170] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
- [ 19.206867] loop: module loaded
- [ 38.641449] Bluetooth: Core ver 2.16
- [ 38.641540] NET: Registered protocol family 31
- [ 38.641544] Bluetooth: HCI device and connection manager initialized
- [ 38.641552] Bluetooth: HCI socket layer initialized
- [ 38.641556] Bluetooth: L2CAP socket layer initialized
- [ 38.642455] Bluetooth: SCO socket layer initialized
- [ 39.253748] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 39.253757] Bluetooth: BNEP filters: protocol multicast
- [ 39.257587] Bluetooth: RFCOMM TTY layer initialized
- [ 39.257601] Bluetooth: RFCOMM socket layer initialized
- [ 39.257605] Bluetooth: RFCOMM ver 1.11
- [ 59.711830] fuse init (API version 7.17)
- [ 61.569595] via-rhine 0000:00:12.0: eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
- [ 72.488035] eth1: no IPv6 routers present
- [ 76.979900] nm-applet[3285]: segfault at 18 ip b74003d8 sp bf890a20 error 4 in libgtk-3.so.0.600.4[b71ce000+4e8000]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement