API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jul 9th, 2015
243
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 26.28 KB | None | 0 0
raw download clone embed print report
  1.  
  2. U-Boot 20ñ?ÿÿÿïÿïÿ¹þïÿ"ýžb6015 Ë 04:52:59 +0530)
  3.  
  4. CPU: x86_64, vendor Intel, device 30679h
  5. DRAM: 2 GiB
  6. MMC: ValleyView SDHCI: 0,üÿÿÿwç;bDetgïtedN25Q64A with page size 256 Bytes, erase size 4 KiB, total 8 MiB, mapped at ff800000
  7. *** Warniÿg - bad CRC, using default environment
  8.  
  9. ÿ1280x1024x16
  10. Model: Intel Minnowboard Max
  11. SCSI: SATA link 0 timeout.
  12. SATA link 1 timeout.
  13. AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
  14. flags: 64bit ncq stag pm led clo pio slum part sxs
  15. scanning bus for devices...
  16. Found 0 device(s).
  17. Net: RTL8169#0
  18. Warning: RTL8169#0 using MAC address from net device
  19.  
  20. SCI is IRQ9
  21. => printenv
  22. baudrate=115200
  23. bootargs=root=/dev/sdb3 init=/sbin/init rootwait ro
  24. bootcmd=ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000
  25. bootfile=bzImage
  26. consoledev=ttyS0
  27. ethact=RTL8169#0
  28. ethaddr=00:13:20:fe:49:6a
  29. hostname="x86"
  30. loadaddr=0x1000000
  31. netdev=eth0
  32. nfsboot=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off console=$consoledev,$baudrate $othbootargs;tftpboot $loadaddr $bootfile;zboot $loadaddr
  33. othbootargs=acpi=off
  34. pciconfighost=1
  35. ramboot=setenv bootargs root=/dev/ram rw ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off console=$consoledev,$baudrate $othbootargs;tftpboot $loadaddr $bootfile;tftpboot $ramdiskaddr $ramdiskfile;zboot $loadaddr 0 $ramdiskaddr $filesize
  36. ramdiskaddr=0x2000000
  37. ramdiskfile=initramfs.gz
  38. rootpath=/opt/nfsroot
  39. scsidevs=0
  40. stderr=vga,serial
  41. stdin=usbkbd,vga,serial
  42. stdout=vga,serial
  43.  
  44. Environment size: 948/4092 bytes
  45. => dhcp
  46. BOOTP broadcast 1
  47. DHCP client bound to address 192.168.0.101 (8 ms)
  48. Using RTL8169#0 device
  49. TFTP from server 0.0.0.0; our IP address is 192.168.0.101; sending through gateway 192.168.0.1
  50. Filename 'bzImage'.
  51. Load address: 0x1000000
  52. Loading: *#
  53. Abort
  54. => setenv serverip 192.168.0.102
  55. => setenv othbootargs acpi=on
  56. => run ramboot
  57. Using RTL8169#0 device
  58. TFTP from server 192.168.0.102; our IP address is 192.168.0.101
  59. Filename 'bzImage'.
  60. Load address: 0x1000000
  61. Loading: *#################################################################
  62. #################################################################
  63. #################################################################
  64. #################################################################
  65. #################################################################
  66. #################################################################
  67. #################################################################
  68. #################################################################
  69. #################################################################
  70. #################################################################
  71. #################################################################
  72. #################################################################
  73. #################################################################
  74. #################################################################
  75. #################################################################
  76. #################################################################
  77. #################################################################
  78. #################################################################
  79. #################################################################
  80. #################################################################
  81. #################################################################
  82. #################################################### 0 Bytes
  83. 1.3 MiB/s
  84. done
  85. Bytes transferred = 7254112 (6eb060 hex)
  86. Using RTL8169#0 device
  87. TFTP from server 192.168.0.102; our IP address is 192.168.0.101
  88. Filename 'initramfs.gz'.
  89. Load address: 0x2000000
  90. Loading: *
  91. TFTP error: 'File not found' (1)
  92. Not retrying...
  93. Valid Boot Flag
  94. Setup Size = 0x00003c00
  95. Magic signature found
  96. Using boot protocol version 2.0d
  97. Linux kernel version 4.0.1 (saket@saket-HP-Pavilion-g6-Notebook-PC) #8 SMP Sat May 9 23:55:06 IST 2015
  98. Building boot_params at 0x00090000
  99. Loading bzImage at address 100000 (7238752 bytes)
  100. Magic signature found
  101. Initial RAM disk at linear address 0x02000000, size 7254112 bytes
  102. Kernel command line: "root=/dev/ram rw ip=192.168.0.101:192.168.0.102:192.168.0.1:255.255.255.0:x86:eth0:off console=ttyS0,115200 acpi=on"
  103.  
  104. Starting kernel ...
  105.  
  106. Timer summary in microseconds:
  107. Mark Elapsed Stage
  108. 0 0 reset
  109. 235,788 235,788 board_init_r
  110. 4,730,633 4,494,845 id=64
  111. 4,730,827 194 id=65
  112. 4,754,999 24,172 main_loop
  113. 25,904,067 21,149,068 id=80
  114. 25,904,070 3 eth_start
  115. 25,904,208 138 bootp_start
  116. 25,928,603 24,395 bootp_stop
  117. 30,016,346 4,087,743 id=81
  118. 30,016,533 187 id=82
  119. 81,491,122 51,474,589 tftp_start
  120. 86,952,691 5,461,569 id=84
  121. 86,952,694 3 tftp_done
  122. 88,188,598 1,235,904 start_kernel
  123.  
  124. Accumulated time:
  125. 464,513 ahci
  126. 3,889,008 vesa display
  127. [ 0.000000] Initializing cgroup subsys cpuset
  128. [ 0.000000] Initializing cgroup subsys cpu
  129. [ 0.000000] Initializing cgroup subsys cpuacct
  130. [ 0.000000] Linux version 4.0.1 (saket@saket-HP-Pavilion-g6-Notebook-PC) (gcc version 4.8.4 (Buildroot 2015.05-git-01601-gac95a7a) ) #8 SMP Sat May 9 23:55:06 IST 2015
  131. [ 0.000000] e820: BIOS-provided physical RAM map:
  132. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
  133. [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
  134. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007adfffff] usable
  135. [ 0.000000] BIOS-e820: [mem 0x000000007ae00000-0x000000007fffffff] reserved
  136. [ 0.000000] Malformed early option 'acpi'
  137. [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
  138. [ 0.000000] DMI not present or invalid.
  139. [ 0.000000] e820: last_pfn = 0x7ae00 max_arch_pfn = 0x100000
  140. [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
  141. [ 0.000000] Scanning 1 areas for low memory corruption
  142. [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
  143. [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
  144. [ 0.000000] init_memory_mapping: [mem 0x00100000-0x36ffffff]
  145. [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
  146. [ 0.000000] RAMDISK: [mem 0x02000000-0x026ebfff]
  147. [ 0.000000] ACPI: Early table checksum verification disabled
  148. [ 0.000000] ACPI: RSDP 0x000F0400 000024 (v02 UBOOT )
  149. [ 0.000000] ACPI: XSDT 0x000F04E0 000034 (v01 UBOOT UBOOT 00000000 UBOO 00000000)
  150. [ 0.000000] ACPI: FACP 0x000F0AA0 0000F4 (v04 UBOOT UBOOT 00000000 UBOO 00000000)
  151. [ 0.000000] ACPI: DSDT 0x000F0650 00044C (v02 COREv4 UBOOT 20110725 INTL 20141107)
  152. [ 0.000000] ACPI: FACS 0x000F0610 000040
  153. [ 0.000000] ACPI: APIC 0x000F0BA0 00005C (v01 UBOOT UBOOT 00000000 UBOO 00000000)
  154. [ 0.000000] 1078MB HIGHMEM available.
  155. [ 0.000000] 887MB LOWMEM available.
  156. [ 0.000000] mapped low ram: 0 - 377fe000
  157. [ 0.000000] low ram: 0 - 377fe000
  158. [ 0.000000] Zone ranges:
  159. [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
  160. [ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff]
  161. [ 0.000000] HighMem [mem 0x00000000377fe000-0x000000007adfffff]
  162. [ 0.000000] Movable zone start for each node
  163. [ 0.000000] Early memory node ranges
  164. [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
  165. [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007adfffff]
  166. [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007adfffff]
  167. [ 0.000000] Using APIC driver default
  168. [ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
  169. [ 0.000000] Reserving Intel graphics stolen memory at 0x7c000000-0x7fffffff
  170. [ 0.000000] ACPI: PM-Timer IO Port: 0x40a
  171. [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  172. [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
  173. [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  174. [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
  175. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  176. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  177. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  178. [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
  179. [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
  180. [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
  181. [ 0.000000] e820: [mem 0x80000000-0xffffffff] available for PCI devices
  182. [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
  183. [ 0.000000] PERCPU: Embedded 17 pages/cpu @f6870000 s40140 r0 d29492 u69632
  184. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 501423
  185. [ 0.000000] Kernel command line: root=/dev/ram rw ip=192.168.0.101:192.168.0.102:192.168.0.1:255.255.255.0:x86:eth0:off console=ttyS0,115200 acpi=on
  186. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  187. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  188. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  189. [ 0.000000] Initializing CPU#0
  190. [ 0.000000] Initializing HighMem for node 0 (000377fe:0007ae00)
  191. [ 0.000000] Initializing Movable for node 0 (00000000:00000000)
  192. [ 0.000000] Memory: 1975164K/2012796K available (7795K kernel code, 480K rwdata, 2536K rodata, 1860K init, 592K bss, 37632K reserved, 0K cma-reserved, 1103880K highmem)
  193. [ 0.000000] virtual kernel memory layout:
  194. [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
  195. [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
  196. [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
  197. [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
  198. [ 0.000000] .init : 0xc1a93000 - 0xc1c64000 (1860 kB)
  199. [ 0.000000] .data : 0xc179d1b1 - 0xc1a91140 (3023 kB)
  200. [ 0.000000] .text : 0xc1000000 - 0xc179d1b1 (7796 kB)
  201. [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  202. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  203. [ 0.000000] Hierarchical RCU implementation.
  204. [ 0.000000] Additional per-CPU info printed with stalls.
  205. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
  206. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  207. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
  208. [ 0.000000] WARNING: Persistent clock returned invalid value!
  209. [ 0.000000] Check your CMOS/BIOS settings.
  210. [ 0.000000] Console: colour dummy device 80x25
  211. [ 0.000000] console [ttyS0] enabled
  212. [ 0.000000] Maximum core-clock to bus-clock ratio: 0xa
  213. [ 0.000000] Resolved frequency ID: 2, frequency: 133200 KHz
  214. [ 0.000000] TSC runs at 1332000 KHz
  215. [ 0.000000] lapic_timer_frequency = 133200
  216. [ 0.000000] tsc: Detected 1332.000 MHz processor
  217. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2664.00 BogoMIPS (lpj=1332000)
  218. [ 0.011902] pid_max: default: 32768 minimum: 301
  219. [ 0.017082] ACPI: Core revision 20150204
  220. [ 0.022231] ACPI: All ACPI Tables successfully acquired
  221. [ 0.135437] ACPI Error: Hardware did not enter ACPI mode (20150204/evxfevnt-113)
  222. [ 0.143750] ACPI Warning: AcpiEnable failed (20150204/utxfinit-173)
  223. [ 0.150789] ACPI: Unable to enable ACPI
  224. [ 0.155110] Security Framework initialized
  225. [ 0.159703] SELinux: Initializing.
  226. [ 0.163638] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  227. [ 0.171051] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  228. [ 0.179283] Initializing cgroup subsys freezer
  229. [ 0.184300] CPU: Physical Processor ID: 0
  230. [ 0.188795] CPU: Processor Core ID: 0
  231. [ 0.192899] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
  232. [ 0.199633] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
  233. [ 0.219619] mce: CPU supports 6 MCE banks
  234. [ 0.224120] CPU0: Thermal monitoring enabled (TM1)
  235. [ 0.229495] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
  236. [ 0.235542] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
  237. [ 0.242858] Freeing SMP alternatives memory: 32K (c1c64000 - c1c6c000)
  238. [ 0.250296] Enabling APIC mode: Flat. Using 1 I/O APICs
  239. [ 0.257260] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  240. [ 0.274017] smpboot: CPU0: Intel(R) Atom(TM) CPU E3825 @ 1.33GHz (fam: 06, model: 37, stepping: 09)
  241. [ 0.284402] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
  242. [ 0.295948] ... version: 3
  243. [ 0.300434] ... bit width: 40
  244. [ 0.305016] ... generic registers: 2
  245. [ 0.309503] ... value mask: 000000ffffffffff
  246. [ 0.315447] ... max period: 000000ffffffffff
  247. [ 0.321391] ... fixed-purpose events: 3
  248. [ 0.325876] ... event mask: 0000000700000003
  249. [ 0.332704] x86: Booting SMP configuration:
  250. [ 0.337399] .... node #0, CPUs: #1
  251. [ 0.352621] Initializing CPU#1
  252. [ 0.370352] x86: Booted up 1 node, 2 CPUs
  253. [ 0.374846] smpboot: Total of 2 processors activated (5328.00 BogoMIPS)
  254. [ 0.382928] devtmpfs: initialized
  255. [ 0.387607] kworker/u4:0 (18) used greatest stack depth: 7440 bytes left
  256. [ 0.387832] RTC time: 3:02:33, date: 165/00/63
  257. [ 0.388264] NET: Registered protocol family 16
  258. [ 0.408783] cpuidle: using governor ladder
  259. [ 0.418401] cpuidle: using governor menu
  260. [ 0.423127] PCI: Using configuration type 1 for base access
  261. [ 0.430739] kworker/u4:0 (49) used greatest stack depth: 7200 bytes left
  262. [ 0.438692] kworker/u4:0 (74) used greatest stack depth: 7008 bytes left
  263. [ 0.465538] ACPI: Interpreter disabled.
  264. [ 0.470115] vgaarb: loaded
  265. [ 0.473462] SCSI subsystem initialized
  266. [ 0.478371] usbcore: registered new interface driver usbfs
  267. [ 0.484586] usbcore: registered new interface driver hub
  268. [ 0.490599] usbcore: registered new device driver usb
  269. [ 0.496348] pps_core: LinuxPPS API ver. 1 registered
  270. [ 0.501910] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  271. [ 0.512167] PTP clock support registered
  272. [ 0.516817] Advanced Linux Sound Architecture Driver Initialized.
  273. [ 0.523684] PCI: Probing PCI hardware
  274. [ 0.527883] PCI host bridge to bus 0000:00
  275. [ 0.532478] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
  276. [ 0.539403] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
  277. [ 0.547115] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  278. [ 0.556339] vgaarb: setting as boot device: PCI:0000:00:02.0
  279. [ 0.562670] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  280. [ 0.576690] pci 0000:00:1c.0: PCI bridge to [bus 01]
  281. [ 0.582470] pci 0000:02:00.0: reg 0x20: can't handle BAR above 4GB (bus address 0x3100ffffc000)
  282. [ 0.594251] pci 0000:00:1c.2: PCI bridge to [bus 02]
  283. [ 0.600565] cfg80211: Calling CRDA to update world regulatory domain
  284. [ 0.607800] NetLabel: Initializing
  285. [ 0.611626] NetLabel: domain hash size = 128
  286. [ 0.616504] NetLabel: protocols = UNLABELED CIPSOv4
  287. [ 0.622093] NetLabel: unlabeled traffic allowed by default
  288. [ 0.628697] Switched to clocksource refined-jiffies
  289. [ 0.647617] pnp: PnP ACPI: disabled
  290. [ 0.865487] PM-Timer running at invalid rate: 0% of normal - aborting.
  291. [ 0.872908] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
  292. [ 0.880517] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
  293. [ 0.889192] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80400000-0x804fffff 64bit pref]
  294. [ 0.897867] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
  295. [ 0.904693] pci 0000:00:1c.0: PCI bridge to [bus 01]
  296. [ 0.910254] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
  297. [ 0.917082] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
  298. [ 0.924687] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
  299. [ 0.933370] pci 0000:02:00.0: BAR 4: assigned [mem 0x80400000-0x80403fff 64bit pref]
  300. [ 0.942059] pci 0000:00:1c.2: PCI bridge to [bus 02]
  301. [ 0.947621] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
  302. [ 0.954448] pci 0000:00:1c.2: bridge window [mem 0xd0b00000-0xd0bfffff]
  303. [ 0.962053] pci 0000:00:1c.2: bridge window [mem 0x80400000-0x804fffff 64bit pref]
  304. [ 0.970853] NET: Registered protocol family 2
  305. [ 0.976218] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  306. [ 0.984173] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  307. [ 0.991447] TCP: Hash tables configured (established 8192 bind 8192)
  308. [ 0.998598] TCP: reno registered
  309. [ 1.002216] UDP hash table entries: 512 (order: 2, 16384 bytes)
  310. [ 1.008857] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  311. [ 1.016071] NET: Registered protocol family 1
  312. [ 1.021100] RPC: Registered named UNIX socket transport module.
  313. [ 1.027735] RPC: Registered udp transport module.
  314. [ 1.033000] RPC: Registered tcp transport module.
  315. [ 1.038269] RPC: Registered tcp NFSv4.1 backchannel transport module.
  316. [ 1.045587] pci 0000:00:1d.0: can't find IRQ for PCI INT A; probably buggy MP table
  317. [ 1.120868] Unpacking initramfs...
  318. [ 1.124740] Initramfs unpacking failed: junk in compressed archive
  319. [ 1.135338] Freeing initrd memory: 7088K (c2000000 - c26ec000)
  320. [ 1.142281] platform rtc_cmos: registered platform RTC device (no PNP device found)
  321. [ 1.151161] microcode: CPU0 sig=0x30679, pf=0x1, revision=0x901
  322. [ 1.157798] microcode: CPU1 sig=0x30679, pf=0x1, revision=0x901
  323. [ 1.157825] kworker/u4:1 (524) used greatest stack depth: 6896 bytes left
  324. [ 1.172171] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  325. [ 1.182688] Scanning for low memory corruption every 60 seconds
  326. [ 1.190072] futex hash table entries: 512 (order: 3, 32768 bytes)
  327. [ 1.196950] audit: initializing netlink subsys (disabled)
  328. [ 1.203020] audit: type=2000 audit(0.835:1): initialized
  329. [ 1.209534] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  330. [ 1.221420] VFS: Disk quotas dquot_6.5.2
  331. [ 1.225934] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  332. [ 1.235169] NFS: Registering the id_resolver key type
  333. [ 1.240858] Key type id_resolver registered
  334. [ 1.245542] Key type id_legacy registered
  335. [ 1.251573] bounce: pool size: 64 pages
  336. [ 1.256008] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  337. [ 1.264289] io scheduler noop registered
  338. [ 1.268684] io scheduler deadline registered
  339. [ 1.273629] io scheduler cfq registered (default)
  340. [ 1.279067] pcieport 0000:00:1c.0: can't find IRQ for PCI INT A; probably buggy MP table
  341. [ 1.288318] pcieport 0000:00:1c.2: can't find IRQ for PCI INT C; probably buggy MP table
  342. [ 1.297626] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
  343. [ 1.305478] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
  344. [ 1.313279] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
  345. [ 1.320621] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  346. [ 1.327192] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  347. ÿ[ 1.628615] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
  348. [ 1.637908] serial 0000:00:1e.3: can't find IRQ for PCI INT C; probably buggy MP table
  349. [ 1.646966] 0000:00:1e.3: ttyS1 at MMIO 0xd0c0d000 (irq = 0, base_baud = 2764800) is a 16550A
  350. [ 1.656667] serial 0000:00:1e.4: can't find IRQ for PCI INT D; probably buggy MP table
  351. [ 1.665677] 0000:00:1e.4: ttyS2 at MMIO 0xd0c0f000 (irq = 0, base_baud = 2764800) is a 16550A
  352. [ 1.675621] Non-volatile memory driver v1.3
  353. [ 1.680486] Linux agpgart interface v0.103
  354. [ 1.685246] [drm] Initialized drm 1.1.0 20060810
  355. [ 1.690503] i915 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table
  356. [ 1.700029] [drm] Memory usable by graphics device = 2048M
  357. [ 1.706182] [drm] Replacing VGA console driver
  358. [ 1.711813] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  359. [ 1.719226] [drm] Driver supports precise vblank timestamp query.
  360. [ 1.791351] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  361. [ 1.833899] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0
  362. [ 1.845490] loop: module loaded
  363. [ 1.849488] ahci 0000:00:13.0: can't find IRQ for PCI INT A; probably buggy MP table
  364. [ 1.858201] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
  365. [ 1.865585] ahci 0000:00:13.0: SSS flag set, parallel bus scan disabled
  366. [ 1.886116] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
  367. [ 1.895176] ahci 0000:00:13.0: flags: 64bit ncq stag pm led clo pio slum part sxs deso
  368. [ 1.905086] scsi host0: ahci
  369. [ 1.908667] scsi host1: ahci
  370. [ 1.909409] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
  371. [ 1.919082] i915 0000:00:02.0: No connectors reported connected with modes
  372. [ 1.919129] [drm] Cannot find any crtc or sizes - going 1024x768
  373. [ 1.935405] fbcon: inteldrmfb (fb0) is primary device
  374. [ 1.935555] ata1: SATA max UDMA/133 abar m2048@0xd0404000 port 0xd0404100 irq 90
  375. [ 1.935567] ata2: SATA max UDMA/133 abar m2048@0xd0404000 port 0xd0404180 irq 90
  376. [ 1.936080] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  377. [ 1.936082] e100: Copyright(c) 1999-2006 Intel Corporation
  378. [ 1.936132] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  379. [ 1.936133] e1000: Copyright (c) 1999-2006 Intel Corporation.
  380. [ 1.936183] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
  381. [ 1.936184] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
  382. [ 1.936240] sky2: driver version 1.30
  383. [ 1.936499] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  384. [ 1.936532] r8169 0000:02:00.0: can't find IRQ for PCI INT A; probably buggy MP table
  385. [ 1.940502] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf801a000, 00:13:20:fe:49:6a, XID 0c000800 IRQ 91
  386. [ 1.940507] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
  387. [ 1.940960] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  388. [ 1.940966] ehci-pci: EHCI PCI platform driver
  389. [ 1.941007] ehci-pci 0000:00:1d.0: can't find IRQ for PCI INT A; probably buggy MP table
  390. [ 1.941015] ehci-pci 0000:00:1d.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1d.0 setup!
  391. [ 1.941022] ehci-pci 0000:00:1d.0: init 0000:00:1d.0 fail, -19
  392. [ 1.941102] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  393. [ 1.941115] ohci-pci: OHCI PCI platform driver
  394. [ 1.941192] uhci_hcd: USB Universal Host Controller Interface driver
  395. [ 1.941356] usbcore: registered new interface driver usblp
  396. [ 1.941437] usbcore: registered new interface driver usb-storage
  397. [ 1.941655] i8042: PNP: No PS/2 controller found. Probing ports directly.
  398. [ 2.303280] ata1: SATA link down (SStatus 0 SControl 300)
  399. [ 2.334742] Console: switching to colour frame buffer device 128x48
  400. [ 2.537081] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  401. [ 2.544002] i915 0000:00:02.0: registered panic notifier
  402. [ 2.978458] i8042: No controller found
  403. [ 2.982718] Switched to clocksource tsc
  404. [ 2.982863] mousedev: PS/2 mouse device common for all mice
  405. [ 2.983124] rtc (null): read_time: rtc_time isn't valid
  406. [ 2.983228] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
  407. [ 2.983266] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
  408. [ 2.983343] i801_smbus 0000:00:1f.3: can't find IRQ for PCI INT B; probably buggy MP table
  409. [ 2.983386] genirq: Flags mismatch irq 0. 00000080 (i801_smbus) vs. 00015a00 (timer)
  410. [ 2.983390] i801_smbus 0000:00:1f.3: Failed to allocate irq 0: -16
  411. [ 2.983393] i801_smbus 0000:00:1f.3: SMBus using polling
  412. [ 2.983706] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
  413. [ 2.983771] hidraw: raw HID events driver (C) Jiri Kosina
  414. [ 2.984319] usbcore: registered new interface driver usbhid
  415. [ 2.984320] usbhid: USB HID core driver
  416. [ 2.984882] Netfilter messages via NETLINK v0.30.
  417. [ 2.984911] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  418. [ 2.985210] ctnetlink v0.93: registering with nfnetlink.
  419. [ 2.985488] ip_tables: (C) 2000-2006 Netfilter Core Team
  420. [ 2.985530] TCP: cubic registered
  421. [ 2.985533] Initializing XFRM netlink socket
  422. [ 2.985904] NET: Registered protocol family 10
  423. [ 2.986501] ip6_tables: (C) 2000-2006 Netfilter Core Team
  424. [ 2.986588] sit: IPv6 over IPv4 tunneling driver
  425. [ 2.986929] NET: Registered protocol family 17
  426. [ 2.986995] Key type dns_resolver registered
  427. [ 2.987620] Using IPI No-Shortcut mode
  428. [ 2.987989] registered taskstats version 1
  429. [ 2.990803] Magic number: 15:274:7
  430. [ 3.141255] console [netcon0] enabled
  431. [ 3.145365] netconsole: network logging started
  432. [ 3.150898] r8169 0000:02:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2
  433. [ 3.161069] r8169 0000:02:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-2)
  434. [ 3.175561] r8169 0000:02:00.0 eth0: link down
  435. [ 3.180560] r8169 0000:02:00.0 eth0: link down
  436. [ 3.185584] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  437. [ 3.488167] ata2: SATA link down (SStatus 0 SControl 300)
  438. [ 4.975192] r8169 0000:02:00.0 eth0: link up
  439. [ 4.980617] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  440. [ 4.997680] IP-Config: Complete:
  441. [ 5.001310] device=eth0, hwaddr=00:13:20:fe:49:6a, ipaddr=192.168.0.101, mask=255.255.255.0, gw=192.168.0.1
  442. [ 5.012709] host=x86, domain=, nis-domain=(none)
  443. [ 5.018366] bootserver=192.168.0.102, rootserver=192.168.0.102, rootpath=
  444. [ 5.026491] ALSA device list:
  445. [ 5.029815] No soundcards found.
  446. [ 5.034765] Freeing unused kernel memory: 1860K (c1a93000 - c1c64000)
  447. [ 5.042173] Write protecting the kernel text: 7800k
  448. [ 5.047735] Write protecting the kernel read-only data: 2540k
  449. [ 5.056874] random: init urandom read with 4 bits of entropy available
  450. Starting logging: OK
  451. Initializing random number generator... done.
  452. Starting network...
  453. ip: RTNETLINK an[ 5.090889] ip (873) used greatest stack depth: 6448 bytes left
  454. swers: File exists
  455.  
  456. Saket Sinha
  457. saket login: s root
  458. # kls /sys/firmware/acp# ls /sys/firmware/memmap/
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!