Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- alex@nebuchadnezzar 0 /Users/alex % ssh 192.168.2.3
- Last login: Tue Jul 21 04:25:15 2015 from 192.168.2.1
- Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
- The Regents of the University of California. All rights reserved.
- DragonFly v4.0.6-RELEASE (X86_64_GENERIC) #0: Fri Jun 12 19:57:23 EDT 2015
- alex@ 0 /home/alex % sudo dmesg -ff
- Copyright (c) 2003-2014 The DragonFly Project.
- Copyright (c) 1992-2003 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- DragonFly v4.0.6-RELEASE #0: Fri Jun 12 19:57:23 EDT 2015
- root@www.shiningsilence.com:/usr/obj/home/justin/release/4_0/sys/X86_64_GENERIC
- TSC invariant clock: 2693823716 Hz, i8254 clock: 1193209 Hz
- CPU: Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz (2693.78-MHz K8-class CPU)
- Origin = "GenuineIntel" Id = 0x306c3 Stepping = 3
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x77fafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,RDRND>
- AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
- AMD Features2=0x21<LAHF,ABM>
- Structured Extended Features=0x2fbb<GSFSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ENHMOVSB,INVPCID,RTM>
- Thermal and PM Features=0x77<SENSOR,TURBO,ARAT,PLN,ECMD,PTM>
- MONITOR/MWAIT Features=0x3<CST,INTBRK>
- real memory = 16971324416 (16185 MB)
- avail memory = 15905112064 (15168 MB)
- lapic: divisor index 0, frequency 49884675 Hz
- Initialize MI interrupts
- TSC testing MP synchronization ...
- TSC is MP synchronized
- TSC: cputimer freq 84180597, shift 5
- VMM: VMX is disabled by the BIOS
- FQ scheduler policy version 1.1 loaded
- wdog: In-kernel automatic watchdog reset enabled
- kbd1 at kbdmux0
- disk scheduler: set policy of vn0 to noop
- disk scheduler: set policy of vn1 to noop
- disk scheduler: set policy of vn2 to noop
- disk scheduler: set policy of vn3 to noop
- disk scheduler: set policy of md0 to noop
- md0: Malloc disk
- ACPI: RSDP 0x00000000000F3060 000024 (v02 HPQOEM)
- ACPI: XSDT 0x0000000045FFE120 0000A4 (v01 HPQOEM SLIC-MPC 00000001 01000013)
- ACPI: FACP 0x0000000045FFC000 00010C (v05 HPQOEM 1909 00000001 HP 00000001)
- ACPI: DSDT 0x0000000045FD1000 025869 (v02 HPQOEM 1909 00000001 INTL 20110112)
- ACPI: FACS 0x0000000045E31000 000040
- ACPI: HPET 0x0000000045FFB000 000038 (v01 HPQOEM 1909 00000001 HP 00000001)
- ACPI: APIC 0x0000000045FFA000 0000BC (v01 HPQOEM 1909 00000001 HP 00000001)
- ACPI: MCFG 0x0000000045FF9000 00003C (v01 HPQOEM 1909 00000001 HP 00000001)
- ACPI: TCPA 0x0000000045FF7000 000032 (v02 HPQOEM 1909 00000000 HP 00000001)
- ACPI: SSDT 0x0000000045FCE000 000466 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
- ACPI: SSDT 0x0000000045FCD000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
- ACPI: SLIC 0x0000000045FCC000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
- ACPI: FPDT 0x0000000045FCA000 000044 (v01 HPQOEM 1909 00000001 HP 00000001)
- ACPI: BGRT 0x0000000045FC9000 000038 (v00 HPQOEM 1909 00000001 HP 00000001)
- ACPI: SSDT 0x0000000045FC3000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
- ACPI: SSDT 0x0000000045FC2000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112)
- ACPI: SSDT 0x0000000045FC1000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112)
- ACPI: SSDT 0x0000000045FC0000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112)
- ACPI: SSDT 0x0000000045FBD000 002F28 (v01 HP NVSGTBL 00001000 INTL 20110112)
- ACPI: ASF! 0x0000000045FF8000 0000A5 (v32 HPQOEM 1909 00000001 HP 00000001)
- cryptosoft0: <software crypto> on motherboard
- aesni0: <AES-CBC,AES-XTS> on motherboard
- padlock0: No ACE support.
- rdrand0: <RdRand RNG> on motherboard
- acpi0: <HPQOEM SLIC-MPC> on motherboard
- ACPI: All ACPI Tables successfully acquired
- ACPI FADT: SCI testing interrupt mode ...
- ACPI FADT: SCI select level/high
- objcache_reclaimlist
- objcache_reclaimlist
- objcache_reclaimlist
- objcache_reclaimlist
- acpi0: Power Button (fixed)
- Warning: ACPI is disabling APM's device. You can't run both
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
- acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- acpi_hpet0: frequency 14318180
- acpi_ec0: <Embedded Controller: GPE 0x16> port 0x66,0x62 on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- vgapci0: <VGA-compatible display> port 0x5000-0x507f mem 0x60000000-0x61ffffff,0x50000000-0x5fffffff,0xcb000000-0xcbffffff irq 16 at device 0.0 on pci1
- pci1: <multimedia, HDA> (vendor 0x10de, dev 0x0e0b) at device 0.1 irq 17
- vgapci1: <VGA-compatible display> port 0x6000-0x603f mem 0xa0000000-0xafffffff,0xcc400000-0xcc7fffff irq 16 at device 2.0 on pci0
- agp0: <Haswell mobile GT2 IG> on vgapci1
- agp0: aperture size is 256M, detected 131068k stolen memory
- vgapci1: Boot video device
- xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xcca20000-0xcca2ffff irq 16 at device 20.0 on pci0
- xhci0: 32 byte context size.
- xhci0: Port routing mask set to 0xffffffff
- usbus0 on xhci0
- pci0: <simple comms> (vendor 0x8086, dev 0x8c3a) at device 22.0 irq 16
- pci0: <simple comms, UART> (vendor 0x8086, dev 0x8c3d) at device 22.3 irq 19
- em0: <Intel(R) PRO/1000 Network Connection PCH_LPT_I217_LM 7.3.8> port 0x6080-0x609f mem 0xcca3b000-0xcca3bfff,0xcca00000-0xcca1ffff irq 20 at device 25.0 on pci0
- usbus0: 5.0Gbps Super Speed USB v3.0
- em0: MAC address: a0:48:1c:d1:23:d6
- ugen0.1: <0x8086> at usbus0
- uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
- ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xcca3a000-0xcca3a3ff irq 16 at device 26.0 on pci0
- usbus1: EHCI version 1.0
- usbus1: <Intel Lynx Point USB 2.0 controller USB-B> on ehci0
- usbus1: 480Mbps High Speed USB v2.0
- pci0: <multimedia, HDA> (vendor 0x8086, dev 0x8c20) at device 27.0 irq 22
- pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
- pcib2: Disable PCI Express hot-plug interrupts(0x0008)
- pci2: <ACPI PCI bus> on pcib2
- pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
- pcib3: Disable PCI Express hot-plug interrupts(0x0008)
- pci59: <ACPI PCI bus> on pcib3
- pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
- pci92: <ACPI PCI bus> on pcib4
- ugen1.1: <Intel> at usbus1
- uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
- iwn0: <Intel Centrino Advanced 6235> mem 0xcc900000-0xcc901fff irq 18 at device 0.0 on pci92
- pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
- pcib5: Disable PCI Express hot-plug interrupts(0x0008)
- pci93: <ACPI PCI bus> on pcib5
- pci93: <unknown> (vendor 0x10ec, dev 0x5249) at device 0.0 irq 19
- ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xcca39000-0xcca393ff irq 17 at device 29.0 on pci0
- usbus2: EHCI version 1.0
- usbus2: <Intel Lynx Point USB 2.0 controller USB-A> on ehci1
- usbus2: 480Mbps High Speed USB v2.0
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- ahci0: <AHCI-PCI-SATA> port 0x6060-0x607f,0x60b8-0x60bb,0x60a0-0x60a7,0x60bc-0x60bf,0x60a8-0x60af mem 0xcca38000-0xcca387ff irq 19 at device 31.2 on pci0
- ugen2.1: <Intel> at usbus2
- uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
- uhub0: 21 ports with 21 removable, self powered
- uhub1: 3 ports with 3 removable, self powered
- uhub2: 3 ports with 3 removable, self powered
- ugen0.2: <vendor 0x138a> at usbus0
- ahci0: Intel hocus pocus
- ahci0: AHCI 1.3 cap 0xcf30ff65<S64A,NCQ,SSS,SALP,SAL,SCLO,PMD,SSC,PSC,EMS,SXS> cap2 0x4<BOH>, 6 ports, 32 tags/port, gen 3 (6Gbps)
- ahci0.1: Caps 4<POD>
- ahci0.2: Caps 200004<ESP,POD>
- ahci0.3: Caps 200004<ESP,POD>
- ahci0.5: Caps 4<POD>
- ugen1.2: <vendor 0x8087> at usbus1
- uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
- ugen2.2: <vendor 0x8087> at usbus2
- uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2
- ugen0.3: <Chicony Electronics Co.,Ltd.> at usbus0
- uhub4: 8 ports with 8 removable, self powered
- ugen0.4: <vendor 0x8087> at usbus0
- ahci0.1: Found ATAPI "hp CDDVDW SU-208CB HH00" serial="R9366YJDA019YT"
- ahci0.1: tags=0/32 satacap=0402 satacap2=0012 satafea=0068 NCQ=NO capacity=1.00MB
- ahci0.1: f85=4210 f86=0000 f87=4000 WC=notsupp RA=notsupp SEC=notsupp
- ahci0.3: No device detected
- ahci0.2: No device detected
- ahci0.5: Found SSD "LITEONIT LMS-32L6M-HP DM51707" serial="002347104559"
- ahci0.5: tags=32/32 satacap=050e satacap2=0086 satafea=014c NCQ=YES capacity=30533.83MB
- ahci0.5: f85=3469 f86=bc01 f87=4123 WC=enabled RA=enabled SEC=frozen
- pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x8c22) at device 31.3 irq 18
- battery0: <ACPI Control Method Battery> on acpi0
- battery1: <ACPI Control Method Battery> on acpi0
- acpi_acad0: <AC Adapter> on acpi0
- acpi_button0: <Sleep Button> on acpi0
- acpi_lid0: <Control Method Lid Switch> on acpi0
- acpi_tz0: <Thermal Zone> on acpi0
- acpi_tz1: <Thermal Zone> on acpi0
- ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20140828/psargs-393)
- ACPI Error: Method parse/execution failed [\\_TZ_.PSL_] (Node 0xffffffe03aa906f8), AE_NOT_FOUND (20140828/psparse-552)
- ACPI Error: Method parse/execution failed [\\_TZ_.GFXZ._PSL] (Node 0xffffffe03aa8ffa8), AE_NOT_FOUND (20140828/psparse-552)
- acpi_tz2: <Thermal Zone> on acpi0
- acpi_tz3: <Thermal Zone> on acpi0
- acpi_tz4: <Thermal Zone> on acpi0
- ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20140828/psargs-393)
- ACPI Error: Method parse/execution failed [\\_TZ_.PSL_] (Node 0xffffffe03aa906f8), AE_NOT_FOUND (20140828/psparse-552)
- ACPI Error: Method parse/execution failed [\\_TZ_.BATZ._PSL] (Node 0xffffffe03aa90398), AE_NOT_FOUND (20140828/psparse-552)
- acpi_tz5: <Thermal Zone> on acpi0
- acpi_tz6: <Thermal Zone> on acpi0
- acpi_tz7: <Thermal Zone> on acpi0
- atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- psm0: <PS/2 Mouse> irq 12 on atkbdc0
- psm0: model Generic PS/2 mouse, device ID 0
- ppc0: <ECP parallel printer port> port 0x778-0x77a,0x378-0x37f irq 5 on acpi0
- ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
- ppc0: FIFO with 16/16/15 bytes threshold
- ppbus0: <Parallel port bus> on ppc0
- uhub3: 6 ports with 6 removable, self powered
- plip0: <PLIP network interface> on ppbus0
- lpt0: <Printer> on ppbus0
- lpt0: Interrupt-driven port
- ppi0: <Parallel I/O> on ppbus0
- cpu0: <ACPI CPU> on acpi0
- ACPI: Dynamic OEM Table Load:
- ACPI: SSDT 0xFFFFFFE1F10FD400 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
- cpu_cst0: <ACPI CPU C-State> on cpu0
- cpu_pst0: <ACPI CPU P-State> on cpu0
- clockmod0: <CPU clock modulation> on cpu0
- perfbias0: <CPU perf-energy bias> on cpu0
- coretemp0: <CPU On-Die Thermal Sensors> on cpu0
- cpu1: <ACPI CPU> on acpi0
- ACPI: Dynamic OEM Table Load:
- ACPI: SSDT 0xFFFFFFE1EF902A80 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
- ACPI: Dynamic OEM Table Load:
- ACPI: SSDT 0xFFFFFFE03AB995A0 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
- cpu_cst1: <ACPI CPU C-State> on cpu1
- cpu_pst1: <ACPI CPU P-State> on cpu1
- clockmod1: <CPU clock modulation> on cpu1
- perfbias1: <CPU perf-energy bias> on cpu1
- coretemp1: <CPU On-Die Thermal Sensors> on cpu1
- cpu2: <ACPI CPU> on acpi0
- cpu_cst2: <ACPI CPU C-State> on cpu2
- cpu_pst2: <ACPI CPU P-State> on cpu2
- clockmod2: <CPU clock modulation> on cpu2
- perfbias2: <CPU perf-energy bias> on cpu2
- coretemp2: <CPU On-Die Thermal Sensors> on cpu2
- cpu3: <ACPI CPU> on acpi0
- cpu_cst3: <ACPI CPU C-State> on cpu3
- cpu_pst3: <ACPI CPU P-State> on cpu3
- clockmod3: <CPU clock modulation> on cpu3
- perfbias3: <CPU perf-energy bias> on cpu3
- coretemp3: <CPU On-Die Thermal Sensors> on cpu3
- cpu4: <ACPI CPU> on acpi0
- cpu_cst4: <ACPI CPU C-State> on cpu4
- cpu_pst4: <ACPI CPU P-State> on cpu4
- clockmod4: <CPU clock modulation> on cpu4
- perfbias4: <CPU perf-energy bias> on cpu4
- coretemp4: <CPU On-Die Thermal Sensors> on cpu4
- cpu5: <ACPI CPU> on acpi0
- cpu_cst5: <ACPI CPU C-State> on cpu5
- cpu_pst5: <ACPI CPU P-State> on cpu5
- clockmod5: <CPU clock modulation> on cpu5
- perfbias5: <CPU perf-energy bias> on cpu5
- coretemp5: <CPU On-Die Thermal Sensors> on cpu5
- cpu6: <ACPI CPU> on acpi0
- cpu_cst6: <ACPI CPU C-State> on cpu6
- cpu_pst6: <ACPI CPU P-State> on cpu6
- clockmod6: <CPU clock modulation> on cpu6
- perfbias6: <CPU perf-energy bias> on cpu6
- coretemp6: <CPU On-Die Thermal Sensors> on cpu6
- cpu7: <ACPI CPU> on acpi0
- cpu_cst7: <ACPI CPU C-State> on cpu7
- cpu_pst7: <ACPI CPU P-State> on cpu7
- clockmod7: <CPU clock modulation> on cpu7
- perfbias7: <CPU perf-energy bias> on cpu7
- coretemp7: <CPU On-Die Thermal Sensors> on cpu7
- ACPI: Enabled 7 GPEs in block 00 to 3F
- pmtimer0 on isa0
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- sio0: can't drain, serial port might not exist, disabling
- sio1: can't drain, serial port might not exist, disabling
- ppc1: cannot reserve I/O port range
- hpt27xx: no controller detected.
- CAM: Configuring 4 busses
- CAM: finished configuring all busses
- disk scheduler: set policy of da0 to noop
- disk scheduler: set policy of cd0 to noop
- da0 at ahci0 bus 5 target 0 lun 0
- da0: <SATA LITEONIT LMS-32L DM51> Fixed Direct Access SCSI-4 device
- da0: Serial Number 002347104559
- da0: 600.000MB/s transfers
- da0: 30533MB (62533296 512 byte sectors: 255H 63S/T 3892C)
- da0: supports TRIM
- cd0 at ahci0 bus 1 target 0 lun 0
- cd0: <hp CDDVDW SU-208CB HH00> Removable CD-ROM SCSI-0 device
- cd0: 150.000MB/s transfers
- cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
- no B_DEVMAGIC (bootdev=0)
- Mounting root from ufs:/dev/serno/002347104559.s1a
- DMA space used: 11536k, remaining available: 16384k
- Mounting devfs
- ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20140828/psargs-393)
- ACPI Error: Method parse/execution failed [\\_TZ_.PSL_] (Node 0xffffffe03aa906f8), AE_NOT_FOUND (20140828/psparse-552)
- ACPI Error: Method parse/execution failed [\\_TZ_.GFXZ._PSL] (Node 0xffffffe03aa8ffa8), AE_NOT_FOUND (20140828/psparse-552)
- ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20140828/psargs-393)
- ACPI Error: Method parse/execution failed [\\_TZ_.PSL_] (Node 0xffffffe03aa906f8), AE_NOT_FOUND (20140828/psparse-552)
- ACPI Error: Method parse/execution failed [\\_TZ_.BATZ._PSL] (Node 0xffffffe03aa90398), AE_NOT_FOUND (20140828/psparse-552)
- boot() called on cpu#3
- Switching to cpu #0 for shutdown
- Waiting (max 60 seconds) for system thread swapcached to stop...stopped
- Waiting (max 60 seconds) for system thread vnlru to stop...stopped
- Waiting (max 60 seconds) for system thread consttyd to stop...stopped
- Waiting (max 60 seconds) for system thread bufdaemon_hw to stop...stopped
- Waiting (max 60 seconds) for system thread bufdaemon to stop...stopped
- syncing disks...
- done
- Copyright (c) 2003-2014 The DragonFly Project.
- Copyright (c) 1992-2003 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- Slab ZoneSize set to 128KB
- Leaving critical section, allowing interrupts
- ACPI SDT: RSDP not in EBDA
- ACPI SDT: RSDP in BIOS mem
- ACPI FADT: SCI irq 9, conform/conform
- DragonFly v4.0.6-RELEASE #0: Fri Jun 12 19:57:23 EDT 2015
- root@www.shiningsilence.com:/usr/obj/home/justin/release/4_0/sys/X86_64_GENERIC
- Calibrating clock(s) ...
- TSC invariant clock: 2693822500 Hz, i8254 clock: 1193208 Hz
- CLK_USE_I8254_CALIBRATION not specified - using default frequency
- CLK_USE_TSC_CALIBRATION not specified - using old calibration method
- CPU: Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz (2693.78-MHz K8-class CPU)
- Origin = "GenuineIntel" Id = 0x306c3 Stepping = 3
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x77fafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,RDRND>
- AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
- AMD Features2=0x21<LAHF,ABM>
- Structured Extended Features=0x2fbb<GSFSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ENHMOVSB,INVPCID,RTM>
- Thermal and PM Features=0x77<SENSOR,TURBO,ARAT,PLN,ECMD,PTM>
- MONITOR/MWAIT Features=0x3<CST,INTBRK>
- npx mask: 0x0000ffff
- real memory = 16971324416 (16185 MB)
- Physical memory chunk(s):
- 0x00020000 - 0x0007ffff, 393216 bytes (96 pages)
- 0x00100000 - 0x001fffff, 1048576 bytes (256 pages)
- 0x029c0000 - 0x44b5ffff, 1109000192 bytes (270752 pages)
- 0x100000000 - 0x4aeddffff, 15818686464 bytes (3861984 pages)
- avail memory = 15905112064 (15168 MB)
- ACPI MADT: LAPIC address 0xfee00000, flags 0x1
- ACPI MADT: BSP apic id 0
- ACPI MADT: cpu id 0, apic id 0
- ACPI MADT: cpu id 1, apic id 1
- ACPI MADT: cpu id 2, apic id 2
- ACPI MADT: cpu id 3, apic id 3
- ACPI MADT: cpu id 4, apic id 4
- ACPI MADT: cpu id 5, apic id 5
- ACPI MADT: cpu id 6, apic id 6
- ACPI MADT: cpu id 7, apic id 7
- lapic: divisor index 0, frequency 49884600 Hz
- SMP: CPU0 apic_initialize():
- lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
- SMP: Waiting APs LAPIC initialization
- SMP: CPU6 apic_initialize():
- SMP: CPU5 apic_initialize():
- SMP: CPU4 apic_initialize():
- lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
- SMP: CPU7 apic_initialize():
- lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
- SMP: CPU2 apic_initialize():
- lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
- SMP: CPU1 apic_initialize():
- lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
- lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
- lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
- SMP: CPU3 apic_initialize():
- lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
- ACPI MADT: warning invalid intsrc irq 9 trig, level
- ACPI MADT: IOAPIC addr 0xfec00000, apic id 0, gsi base 0
- ACPI MADT: INTSRC irq 0 -> gsi 2 edge/high
- ACPI MADT: SCI irq 9, first test level/high
- IOAPIC: idx 0, apic id 8, gsi base 0, npin 24
- IOAPIC: irq 1, gsi 1 -> cpu1 (auto)
- IOAPIC: irq 1 -> gsi 1 edge/high
- IOAPIC: irq 0, gsi 2 -> cpu0 (0)
- IOAPIC: irq 0 -> gsi 2 edge/high
- IOAPIC: irq 3, gsi 3 -> cpu3 (auto)
- IOAPIC: irq 3 -> gsi 3 edge/high
- IOAPIC: irq 4, gsi 4 -> cpu4 (auto)
- IOAPIC: irq 4 -> gsi 4 edge/high
- IOAPIC: irq 5, gsi 5 -> cpu5 (auto)
- IOAPIC: irq 5 -> gsi 5 edge/high
- IOAPIC: irq 6, gsi 6 -> cpu6 (auto)
- IOAPIC: irq 6 -> gsi 6 edge/high
- IOAPIC: irq 7, gsi 7 -> cpu7 (auto)
- IOAPIC: irq 7 -> gsi 7 edge/high
- IOAPIC: irq 8, gsi 8 -> cpu0 (auto)
- IOAPIC: irq 8 -> gsi 8 edge/high
- IOAPIC: irq 9, gsi 9 -> cpu0 (sci)
- IOAPIC: irq 9 -> gsi 9 edge/high
- IOAPIC: irq 10, gsi 10 -> cpu2 (auto)
- IOAPIC: irq 10 -> gsi 10 edge/high
- IOAPIC: irq 11, gsi 11 -> cpu3 (auto)
- IOAPIC: irq 11 -> gsi 11 edge/high
- IOAPIC: irq 12, gsi 12 -> cpu4 (auto)
- IOAPIC: irq 12 -> gsi 12 edge/high
- IOAPIC: irq 13, gsi 13 -> cpu5 (auto)
- IOAPIC: irq 13 -> gsi 13 edge/high
- IOAPIC: irq 14, gsi 14 -> cpu6 (auto)
- IOAPIC: irq 14 -> gsi 14 edge/high
- IOAPIC: irq 15, gsi 15 -> cpu7 (auto)
- IOAPIC: irq 15 -> gsi 15 edge/high
- IOAPIC: irq 16, gsi 16 -> cpu0 (auto)
- IOAPIC: irq 16 -> gsi 16 level/low
- IOAPIC: irq 17, gsi 17 -> cpu1 (auto)
- IOAPIC: irq 17 -> gsi 17 level/low
- IOAPIC: irq 18, gsi 18 -> cpu2 (auto)
- IOAPIC: irq 18 -> gsi 18 level/low
- IOAPIC: irq 19, gsi 19 -> cpu3 (auto)
- IOAPIC: irq 19 -> gsi 19 level/low
- IOAPIC: irq 20, gsi 20 -> cpu4 (auto)
- IOAPIC: irq 20 -> gsi 20 level/low
- IOAPIC: irq 21, gsi 21 -> cpu5 (auto)
- IOAPIC: irq 21 -> gsi 21 level/low
- IOAPIC: irq 22, gsi 22 -> cpu6 (auto)
- IOAPIC: irq 22 -> gsi 22 level/low
- IOAPIC: irq 23, gsi 23 -> cpu7 (auto)
- IOAPIC: irq 23 -> gsi 23 level/low
- IOAPIC: cpu0 irq 1 reserved
- IOAPIC: cpu0 irq 2 reserved
- IOAPIC: cpu0 irq 3 reserved
- IOAPIC: cpu0 irq 4 reserved
- IOAPIC: cpu0 irq 5 reserved
- IOAPIC: cpu0 irq 6 reserved
- IOAPIC: cpu0 irq 7 reserved
- IOAPIC: cpu0 irq 10 reserved
- IOAPIC: cpu0 irq 11 reserved
- IOAPIC: cpu0 irq 12 reserved
- IOAPIC: cpu0 irq 13 reserved
- IOAPIC: cpu0 irq 14 reserved
- IOAPIC: cpu0 irq 15 reserved
- IOAPIC: cpu1 irq 0 reserved
- IOAPIC: cpu1 irq 2 reserved
- IOAPIC: cpu1 irq 3 reserved
- IOAPIC: cpu1 irq 4 reserved
- IOAPIC: cpu1 irq 5 reserved
- IOAPIC: cpu1 irq 6 reserved
- IOAPIC: cpu1 irq 7 reserved
- IOAPIC: cpu1 irq 8 reserved
- IOAPIC: cpu1 irq 9 reserved
- IOAPIC: cpu1 irq 10 reserved
- IOAPIC: cpu1 irq 11 reserved
- IOAPIC: cpu1 irq 12 reserved
- IOAPIC: cpu1 irq 13 reserved
- IOAPIC: cpu1 irq 14 reserved
- IOAPIC: cpu1 irq 15 reserved
- IOAPIC: cpu2 irq 0 reserved
- IOAPIC: cpu2 irq 1 reserved
- IOAPIC: cpu2 irq 2 reserved
- IOAPIC: cpu2 irq 3 reserved
- IOAPIC: cpu2 irq 4 reserved
- IOAPIC: cpu2 irq 5 reserved
- IOAPIC: cpu2 irq 6 reserved
- IOAPIC: cpu2 irq 7 reserved
- IOAPIC: cpu2 irq 8 reserved
- IOAPIC: cpu2 irq 9 reserved
- IOAPIC: cpu2 irq 11 reserved
- IOAPIC: cpu2 irq 12 reserved
- IOAPIC: cpu2 irq 13 reserved
- IOAPIC: cpu2 irq 14 reserved
- IOAPIC: cpu2 irq 15 reserved
- IOAPIC: cpu3 irq 0 reserved
- IOAPIC: cpu3 irq 1 reserved
- IOAPIC: cpu3 irq 2 reserved
- IOAPIC: cpu3 irq 4 reserved
- IOAPIC: cpu3 irq 5 reserved
- IOAPIC: cpu3 irq 6 reserved
- IOAPIC: cpu3 irq 7 reserved
- IOAPIC: cpu3 irq 8 reserved
- IOAPIC: cpu3 irq 9 reserved
- IOAPIC: cpu3 irq 10 reserved
- IOAPIC: cpu3 irq 12 reserved
- IOAPIC: cpu3 irq 13 reserved
- IOAPIC: cpu3 irq 14 reserved
- IOAPIC: cpu3 irq 15 reserved
- IOAPIC: cpu4 irq 0 reserved
- IOAPIC: cpu4 irq 1 reserved
- IOAPIC: cpu4 irq 2 reserved
- IOAPIC: cpu4 irq 3 reserved
- IOAPIC: cpu4 irq 5 reserved
- IOAPIC: cpu4 irq 6 reserved
- IOAPIC: cpu4 irq 7 reserved
- IOAPIC: cpu4 irq 8 reserved
- IOAPIC: cpu4 irq 9 reserved
- IOAPIC: cpu4 irq 10 reserved
- IOAPIC: cpu4 irq 11 reserved
- IOAPIC: cpu4 irq 13 reserved
- IOAPIC: cpu4 irq 14 reserved
- IOAPIC: cpu4 irq 15 reserved
- IOAPIC: cpu5 irq 0 reserved
- IOAPIC: cpu5 irq 1 reserved
- IOAPIC: cpu5 irq 2 reserved
- IOAPIC: cpu5 irq 3 reserved
- IOAPIC: cpu5 irq 4 reserved
- IOAPIC: cpu5 irq 6 reserved
- IOAPIC: cpu5 irq 7 reserved
- IOAPIC: cpu5 irq 8 reserved
- IOAPIC: cpu5 irq 9 reserved
- IOAPIC: cpu5 irq 10 reserved
- IOAPIC: cpu5 irq 11 reserved
- IOAPIC: cpu5 irq 12 reserved
- IOAPIC: cpu5 irq 14 reserved
- IOAPIC: cpu5 irq 15 reserved
- IOAPIC: cpu6 irq 0 reserved
- IOAPIC: cpu6 irq 1 reserved
- IOAPIC: cpu6 irq 2 reserved
- IOAPIC: cpu6 irq 3 reserved
- IOAPIC: cpu6 irq 4 reserved
- IOAPIC: cpu6 irq 5 reserved
- IOAPIC: cpu6 irq 7 reserved
- IOAPIC: cpu6 irq 8 reserved
- IOAPIC: cpu6 irq 9 reserved
- IOAPIC: cpu6 irq 10 reserved
- IOAPIC: cpu6 irq 11 reserved
- IOAPIC: cpu6 irq 12 reserved
- IOAPIC: cpu6 irq 13 reserved
- IOAPIC: cpu6 irq 15 reserved
- IOAPIC: cpu7 irq 0 reserved
- IOAPIC: cpu7 irq 1 reserved
- IOAPIC: cpu7 irq 2 reserved
- IOAPIC: cpu7 irq 3 reserved
- IOAPIC: cpu7 irq 4 reserved
- IOAPIC: cpu7 irq 5 reserved
- IOAPIC: cpu7 irq 6 reserved
- IOAPIC: cpu7 irq 8 reserved
- IOAPIC: cpu7 irq 9 reserved
- IOAPIC: cpu7 irq 10 reserved
- IOAPIC: cpu7 irq 11 reserved
- IOAPIC: cpu7 irq 12 reserved
- IOAPIC: cpu7 irq 13 reserved
- IOAPIC: cpu7 irq 14 reserved
- IOAPIC: legacy irq max 24
- ELCR Found. ISA IRQs programmed as:
- 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
- E E E E E L E E E E L L E E E E
- Initialize MI interrupts
- MWAIT hints (2 C1 hints):
- C1/0 hint 0x0000
- C1/1 hint 0x0001
- C2/0 hint 0x0010
- MWAIT deep hints:
- C1/0 hint 0x0000
- C1/1 hint 0x0001
- C2/0 hint 0x0010
- C3/0 hint 0x0020
- C3/1 hint 0x0021
- C4/0 hint 0x0030
- C4/1 hint 0x0031
- C4/2 hint 0x0032
- C4/3 hint 0x0033
- objcache: magazine cap [6, 134]
- Finish MP startup
- Active CPU Mask: 00000000000000ff
- TSC testing MP synchronization ...
- TSC is MP synchronized, after 31590 tries
- TSC: cputimer freq 84180703, shift 5
- Preloaded elf kernel "kernel" at 0xffffffff82291000.
- Preloaded elf obj module "acpi.ko" at 0xffffffff82291410.
- Preloaded elf obj module "ehci.ko" at 0xffffffff82291a68.
- Preloaded elf obj module "xhci.ko" at 0xffffffff82291fc0.
- Bits within APICID: logical_CPU_bits: 1; core_bits: 3
- CPU Topology: cores_per_chip: 4; threads_per_core: 2; chips_per_package: 1;
- VMM: VMX is disabled by the BIOS
- start dummy scheduler helpers on cpus: 0 1 2 3 4 5 6 7
- Start usched_bsd4 helpers on cpus:
- cpu0 - HyperThreading available. Core siblings: cpus(0-1)
- cpu1 - HyperThreading available. Core siblings: cpus(0-1)
- cpu2 - HyperThreading available. Core siblings: cpus(2-3)
- cpu3 - HyperThreading available. Core siblings: cpus(2-3)
- cpu4 - HyperThreading available. Core siblings: cpus(4-5)
- cpu5 - HyperThreading available. Core siblings: cpus(4-5)
- cpu6 - HyperThreading available. Core siblings: cpus(6-7)
- cpu7 - HyperThreading available. Core siblings: cpus(6-7)
- Start usched_dfly helpers on cpus:
- cpu0 - HyperThreading available. Core siblings: cpus(0-1)
- cpu1 - HyperThreading available. Core siblings: cpus(0-1)
- cpu2 - HyperThreading available. Core siblings: cpus(2-3)
- cpu3 - HyperThreading available. Core siblings: cpus(2-3)
- cpu4 - HyperThreading available. Core siblings: cpus(4-5)
- cpu5 - HyperThreading available. Core siblings: cpus(4-5)
- cpu6 - HyperThreading available. Core siblings: cpus(6-7)
- cpu7 - HyperThreading available. Core siblings: cpus(6-7)
- FQ scheduler policy version 1.1 loaded
- wdog: In-kernel automatic watchdog reset enabled
- wlan: <802.11 Link Layer>
- ath_dfs: WTF module
- ath_rate: <SampleRate bit-rate selection algorithm>
- kbd: new array size 4
- kbd1 at kbdmux0
- No policy for vn0 specified, or policy not found
- disk scheduler: set policy of vn0 to noop
- No policy for vn1 specified, or policy not found
- disk scheduler: set policy of vn1 to noop
- No policy for vn2 specified, or policy not found
- disk scheduler: set policy of vn2 to noop
- No policy for vn3 specified, or policy not found
- disk scheduler: set policy of vn3 to noop
- crypto: <crypto core>
- No policy for md0 specified, or policy not found
- disk scheduler: set policy of md0 to noop
- md0: Malloc disk
- md0: invalid primary partition table: no magic
- hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
- hpt27xx: RocketRAID 27xx controller driver v1.0 (Jun 12 2015 19:57:06)
- IOAPIC: rman cpu0 0 - 0
- IOAPIC: rman cpu0 8 - 9
- IOAPIC: rman cpu0 16 - 95
- IOAPIC: rman cpu0 97 - 191
- IOAPIC: rman cpu1 1 - 1
- IOAPIC: rman cpu1 16 - 95
- IOAPIC: rman cpu1 97 - 191
- IOAPIC: rman cpu2 10 - 10
- IOAPIC: rman cpu2 16 - 95
- IOAPIC: rman cpu2 97 - 191
- IOAPIC: rman cpu3 3 - 3
- IOAPIC: rman cpu3 11 - 11
- IOAPIC: rman cpu3 16 - 95
- IOAPIC: rman cpu3 97 - 191
- IOAPIC: rman cpu4 4 - 4
- IOAPIC: rman cpu4 12 - 12
- IOAPIC: rman cpu4 16 - 95
- IOAPIC: rman cpu4 97 - 191
- IOAPIC: rman cpu5 5 - 5
- IOAPIC: rman cpu5 13 - 13
- IOAPIC: rman cpu5 16 - 95
- IOAPIC: rman cpu5 97 - 191
- IOAPIC: rman cpu6 6 - 6
- IOAPIC: rman cpu6 14 - 14
- IOAPIC: rman cpu6 16 - 95
- IOAPIC: rman cpu6 97 - 191
- IOAPIC: rman cpu7 7 - 7
- IOAPIC: rman cpu7 15 - 95
- IOAPIC: rman cpu7 97 - 191
- ACPI: RSDP 0x00000000000F3060 000024 (v02 HPQOEM)
- ACPI: XSDT 0x0000000045FFE120 0000A4 (v01 HPQOEM SLIC-MPC 00000001 01000013)
- ACPI: FACP 0x0000000045FFC000 00010C (v05 HPQOEM 1909 00000001 HP 00000001)
- ACPI: DSDT 0x0000000045FD1000 025869 (v02 HPQOEM 1909 00000001 INTL 20110112)
- ACPI: FACS 0x0000000045E31000 000040
- ACPI: HPET 0x0000000045FFB000 000038 (v01 HPQOEM 1909 00000001 HP 00000001)
- ACPI: APIC 0x0000000045FFA000 0000BC (v01 HPQOEM 1909 00000001 HP 00000001)
- ACPI: MCFG 0x0000000045FF9000 00003C (v01 HPQOEM 1909 00000001 HP 00000001)
- ACPI: TCPA 0x0000000045FF7000 000032 (v02 HPQOEM 1909 00000000 HP 00000001)
- ACPI: SSDT 0x0000000045FCE000 000466 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
- ACPI: SSDT 0x0000000045FCD000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
- ACPI: SLIC 0x0000000045FCC000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
- ACPI: FPDT 0x0000000045FCA000 000044 (v01 HPQOEM 1909 00000001 HP 00000001)
- ACPI: BGRT 0x0000000045FC9000 000038 (v00 HPQOEM 1909 00000001 HP 00000001)
- ACPI: SSDT 0x0000000045FC3000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
- ACPI: SSDT 0x0000000045FC2000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112)
- ACPI: SSDT 0x0000000045FC1000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112)
- ACPI: SSDT 0x0000000045FC0000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112)
- ACPI: SSDT 0x0000000045FBD000 002F28 (v01 HP NVSGTBL 00001000 INTL 20110112)
- ACPI: ASF! 0x0000000045FF8000 0000A5 (v32 HPQOEM 1909 00000001 HP 00000001)
- cryptosoft0.nexus0.root0
- cryptosoft0: <software crypto> [tentative] on motherboard
- crypto: assign cryptosoft0 driver id 0, flags 234881024
- crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
- cryptosoft0: <software crypto> [attached!] on motherboard
- aesni0.nexus0.root0
- aesni0: <AES-CBC,AES-XTS> [tentative] on motherboard
- crypto: assign aesni0 driver id 1, flags 16777216
- crypto: aesni0 registers alg 11 flags 0 maxoplen 0
- crypto: aesni0 registers alg 22 flags 0 maxoplen 0
- aesni0: <AES-CBC,AES-XTS> [attached!] on motherboard
- padlock0: No ACE support.
- rdrand0.nexus0.root0
- rdrand0: <RdRand RNG> [tentative] on motherboard
- rdrand0: <RdRand RNG> [attached!] on motherboard
- acpi0.nexus0.root0
- acpi0: <HPQOEM SLIC-MPC> [tentative] on motherboard
- ACPI: All ACPI Tables successfully acquired
- PCIe: Memory Mapped configuration base @ 0xe0000000, bus [0, 255]
- PCIe: Using Memory Mapped configuration
- ACPI FADT: SCI testing interrupt mode ...
- ACPI FADT: SCI testing level/high
- IOAPIC: irq 9, gsi 9 edge/high -> level/high
- ACPI FADT: SCI select level/high
- objcache_reclaimlist
- objcache_reclaimlist
- objcache_reclaimlist
- objcache_reclaimlist
- acpi0: Power Button (fixed)
- Warning: ACPI is disabling APM's device. You can't run both
- unknown: not probed (disabled)
- unknown: not probed (disabled)
- ACPI timer looks GOOD min = 2, max = 4, width = 2
- ACPI timer looks GOOD min = 2, max = 3, width = 1
- ACPI timer looks GOOD min = 2, max = 3, width = 1
- ACPI timer looks GOOD min = 1, max = 3, width = 2
- ACPI timer looks GOOD min = 2, max = 3, width = 1
- ACPI timer looks GOOD min = 2, max = 3, width = 1
- ACPI timer looks GOOD min = 2, max = 3, width = 1
- ACPI timer looks GOOD min = 2, max = 3, width = 1
- ACPI timer looks GOOD min = 2, max = 3, width = 1
- ACPI timer looks GOOD min = 2, max = 3, width = 1
- acpi_timer0.acpi0.nexus0.root0
- acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x1808-0x180b on acpi0
- acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x1808-0x180b on acpi0
- acpi_hpet0.acpi0.nexus0.root0
- acpi_hpet0: <High Precision Event Timer> [tentative] iomem 0xfed00000-0xfed003ff on acpi0
- acpi_hpet0: vend: 0x8086, rev: 0x1, num: 7, opts: legacy_route 64-bit
- acpi_hpet0: frequency 14318180
- acpi_hpet0: <High Precision Event Timer> [attached!] iomem 0xfed00000-0xfed003ff on acpi0
- unknown: not probed (disabled)
- unknown: not probed (disabled)
- acpi_ec0.acpi0.nexus0.root0
- acpi_ec0: <Embedded Controller: GPE 0x16> [tentative] port 0x66,0x62 on acpi0
- acpi_ec0: <Embedded Controller: GPE 0x16> [attached!] port 0x66,0x62 on acpi0
- pci_link0: Index IRQ Rtd Ref IRQs
- Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15
- Validation 0 10 N 0 3 4 5 6 10 11 12 14 15
- After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
- pci_link1: Index IRQ Rtd Ref IRQs
- Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15
- Validation 0 10 N 0 3 4 5 6 10 11 12 14 15
- After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
- pci_link2: Index IRQ Rtd Ref IRQs
- Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15
- Validation 0 10 N 0 3 4 5 6 10 11 12 14 15
- After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
- pci_link3: Index IRQ Rtd Ref IRQs
- Initial Probe 0 5 N 0 3 4 5 6 10 11 12 14 15
- Validation 0 5 N 0 3 4 5 6 10 11 12 14 15
- After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
- pci_link4: Index IRQ Rtd Ref IRQs
- Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15
- Validation 0 10 N 0 3 4 5 6 10 11 12 14 15
- After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
- pci_link5: Index IRQ Rtd Ref IRQs
- Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15
- Validation 0 255 N 0 3 4 5 6 10 11 12 14 15
- After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
- pci_link6: Index IRQ Rtd Ref IRQs
- Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15
- Validation 0 11 N 0 3 4 5 6 10 11 12 14 15
- After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
- pci_link7: Index IRQ Rtd Ref IRQs
- Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15
- Validation 0 255 N 0 3 4 5 6 10 11 12 14 15
- After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
- unknown: not probed (disabled)
- pcib0.acpi0.nexus0.root0
- pcib0: <ACPI Host-PCI bridge> [tentative] port 0xcf8-0xcff on acpi0
- pci0.pcib0.acpi0.nexus0.root0
- pci0: <ACPI PCI bus> [tentative] on pcib0
- pci0: domain=0, physical bus=0
- found-> vendor=0x8086, dev=0x0c04, revid=0x06
- domain=0, bus=0, slot=0, func=0
- class=06-00-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x8086, dev=0x0c01, revid=0x06
- domain=0, bus=0, slot=1, func=0
- class=06-04-00, hdrtype=0x01, mfdev=1
- cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 3 supports D0 D3 current D0
- MSI supports 1 message
- PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x000c2580
- pcib0: matched entry for 0.1.INTA
- pcib0: slot 1 INTA hardwired to GSI 16, IRQ 16
- found-> vendor=0x8086, dev=0x0416, revid=0x06
- domain=0, bus=0, slot=2, func=0
- class=03-00-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 2 supports D0 D3 current D0
- MSI supports 1 message
- map[10]: type Memory, range 64, base 0xcc400000, size 22, enabled
- map[18]: type Prefetchable Memory, range 64, base 0xa0000000, size 28, enabled
- map[20]: type I/O Port, range 32, base 0x6000, size 6, enabled
- pcib0: matched entry for 0.2.INTA
- pcib0: slot 2 INTA hardwired to GSI 16, IRQ 16
- found-> vendor=0x8086, dev=0x8c31, revid=0x04
- domain=0, bus=0, slot=20, func=0
- class=0c-03-30, hdrtype=0x00, mfdev=0
- cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 2 supports D0 D3 current D0
- MSI supports 8 messages, 64 bit
- map[10]: type Memory, range 64, base 0xcca20000, size 16, memory disabled
- pcib0: matched entry for 0.20.INTA
- pcib0: slot 20 INTA hardwired to GSI 16, IRQ 16
- unknown: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xcca20000
- xhci early: xhci is not owned by SMM
- found-> vendor=0x8086, dev=0x8c3a, revid=0x04
- domain=0, bus=0, slot=22, func=0
- class=07-80-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 3 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- map[10]: type Memory, range 64, base 0xcca35000, size 4, enabled
- pcib0: matched entry for 0.22.INTA
- pcib0: slot 22 INTA hardwired to GSI 16, IRQ 16
- found-> vendor=0x8086, dev=0x8c3d, revid=0x04
- domain=0, bus=0, slot=22, func=3
- class=07-00-02, hdrtype=0x00, mfdev=0
- cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=d, irq=5
- powerspec 3 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- map[10]: type I/O Port, range 32, base 0x60b0, size 3, enabled
- map[14]: type Memory, range 32, base 0xcca3c000, size 12, enabled
- pcib0: matched entry for 0.22.INTD
- pcib0: slot 22 INTD hardwired to GSI 19, IRQ 19
- found-> vendor=0x8086, dev=0x153a, revid=0x04
- domain=0, bus=0, slot=25, func=0
- class=02-00-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 2 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- map[10]: type Memory, range 32, base 0xcca00000, size 17, enabled
- map[14]: type Memory, range 32, base 0xcca3b000, size 12, enabled
- map[18]: type I/O Port, range 32, base 0x6080, size 5, enabled
- pcib0: matched entry for 0.25.INTA
- pcib0: slot 25 INTA hardwired to GSI 20, IRQ 20
- found-> vendor=0x8086, dev=0x8c2d, revid=0x04
- domain=0, bus=0, slot=26, func=0
- class=0c-03-20, hdrtype=0x00, mfdev=0
- cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 2 supports D0 D3 current D0
- map[10]: type Memory, range 32, base 0xcca3a000, size 10, enabled
- pcib0: matched entry for 0.26.INTA
- pcib0: slot 26 INTA hardwired to GSI 16, IRQ 16
- unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xcca3a000
- found-> vendor=0x8086, dev=0x8c20, revid=0x04
- domain=0, bus=0, slot=27, func=0
- class=04-03-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=11
- powerspec 2 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- PCI Express ver.1 cap=0x0091[ROOTDEV]
- map[10]: type Memory, range 64, base 0xcca30000, size 14, enabled
- pcib0: matched entry for 0.27.INTA
- pcib0: slot 27 INTA hardwired to GSI 22, IRQ 22
- found-> vendor=0x8086, dev=0x8c10, revid=0xd4
- domain=0, bus=0, slot=28, func=0
- class=06-04-00, hdrtype=0x01, mfdev=1
- cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 3 supports D0 D3 current D0
- MSI supports 1 message
- PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x0004fd60[HOTPLUG]
- pcib0: matched entry for 0.28.INTA
- pcib0: slot 28 INTA hardwired to GSI 16, IRQ 16
- found-> vendor=0x8086, dev=0x8c18, revid=0xd4
- domain=0, bus=0, slot=28, func=4
- class=06-04-00, hdrtype=0x01, mfdev=1
- cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 3 supports D0 D3 current D0
- MSI supports 1 message
- PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x0024b260[HOTPLUG]
- pcib0: matched entry for 0.28.INTA
- pcib0: slot 28 INTA hardwired to GSI 16, IRQ 16
- found-> vendor=0x8086, dev=0x8c1c, revid=0xd4
- domain=0, bus=0, slot=28, func=6
- class=06-04-00, hdrtype=0x01, mfdev=1
- cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=c, irq=10
- powerspec 3 supports D0 D3 current D0
- MSI supports 1 message
- PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x0034b200
- pcib0: matched entry for 0.28.INTC
- pcib0: slot 28 INTC hardwired to GSI 18, IRQ 18
- found-> vendor=0x8086, dev=0x8c1e, revid=0xd4
- domain=0, bus=0, slot=28, func=7
- class=06-04-00, hdrtype=0x01, mfdev=1
- cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=d, irq=5
- powerspec 3 supports D0 D3 current D0
- MSI supports 1 message
- PCI Express ver.2 cap=0x0142[ROOT], slotcap=0x003cb260[HOTPLUG]
- pcib0: matched entry for 0.28.INTD
- pcib0: slot 28 INTD hardwired to GSI 19, IRQ 19
- found-> vendor=0x8086, dev=0x8c26, revid=0x04
- domain=0, bus=0, slot=29, func=0
- class=0c-03-20, hdrtype=0x00, mfdev=0
- cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 2 supports D0 D3 current D0
- map[10]: type Memory, range 32, base 0xcca39000, size 10, enabled
- pcib0: matched entry for 0.29.INTA
- pcib0: slot 29 INTA hardwired to GSI 17, IRQ 17
- unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xcca39000
- found-> vendor=0x8086, dev=0x8c4f, revid=0x04
- domain=0, bus=0, slot=31, func=0
- class=06-01-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x8086, dev=0x8c03, revid=0x04
- domain=0, bus=0, slot=31, func=2
- class=01-06-01, hdrtype=0x00, mfdev=0
- cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=b, irq=5
- powerspec 3 supports D0 D3 current D0
- MSI supports 1 message
- map[10]: type I/O Port, range 32, base 0x60a8, size 3, enabled
- map[14]: type I/O Port, range 32, base 0x60bc, size 2, enabled
- map[18]: type I/O Port, range 32, base 0x60a0, size 3, enabled
- map[1c]: type I/O Port, range 32, base 0x60b8, size 2, enabled
- map[20]: type I/O Port, range 32, base 0x6060, size 5, enabled
- map[24]: type Memory, range 32, base 0xcca38000, size 11, enabled
- pcib0: matched entry for 0.31.INTB
- pcib0: slot 31 INTB hardwired to GSI 19, IRQ 19
- found-> vendor=0x8086, dev=0x8c22, revid=0x04
- domain=0, bus=0, slot=31, func=3
- class=0c-05-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=c, irq=10
- map[10]: type Memory, range 64, base 0xcca34000, size 8, enabled
- map[20]: type I/O Port, range 32, base 0xef80, size 5, enabled
- pcib0: matched entry for 0.31.INTC
- pcib0: slot 31 INTC hardwired to GSI 18, IRQ 18
- pcib1.pci0.pcib0.acpi0.nexus0.root0
- pcib1: <ACPI PCI-PCI bridge> [tentative] irq 16 at device 1.0 on pci0
- pcib1: domain 0
- pcib1: secondary bus 1
- pcib1: subordinate bus 1
- pcib1: I/O decode 0x5000-0x5fff
- pcib1: memory decode 0xcb000000-0xcc0fffff
- pcib1: prefetched decode 0x50000000-0x61ffffff
- pci1.pcib1.pci0.pcib0.acpi0.nexus0.root0
- pci1: <ACPI PCI bus> [tentative] on pcib1
- pci1: domain=0, physical bus=1
- found-> vendor=0x10de, dev=0x11fc, revid=0xa1
- domain=0, bus=1, slot=0, func=0
- class=03-00-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 3 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- PCI Express ver.2 cap=0x0002[DEVICE]
- map[10]: type Memory, range 32, base 0xcb000000, size 24, memory disabled
- pcib1: requested memory range 0xcb000000-0xcbffffff: good
- map[14]: type Prefetchable Memory, range 64, base 0x50000000, size 28, enabled
- pcib1: requested memory range 0x50000000-0x5fffffff: good
- map[1c]: type Prefetchable Memory, range 64, base 0x60000000, size 25, enabled
- pcib1: requested memory range 0x60000000-0x61ffffff: good
- map[24]: type I/O Port, range 32, base 0x5000, size 7, port disabled
- pcib1: requested I/O range 0x5000-0x507f: in range
- pcib1: matched entry for 1.0.INTA
- pcib1: slot 0 INTA hardwired to GSI 16, IRQ 16
- found-> vendor=0x10de, dev=0x0e0b, revid=0xa1
- domain=0, bus=1, slot=0, func=1
- class=04-03-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=b, irq=10
- powerspec 3 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- PCI Express ver.2 cap=0x0002[DEVICE]
- map[10]: type Memory, range 32, base 0xcc000000, size 14, enabled
- pcib1: requested memory range 0xcc000000-0xcc003fff: good
- pcib1: matched entry for 1.0.INTB
- pcib1: slot 0 INTB hardwired to GSI 17, IRQ 17
- vgapci0.pci1.pcib1.pci0.pcib0.acpi0.nexus0.root0
- vgapci0: <VGA-compatible display> [tentative] port 0x5000-0x507f mem 0x60000000-0x61ffffff,0x50000000-0x5fffffff,0xcb000000-0xcbffffff irq 16 at device 0.0 on pci1
- vgapci0: <VGA-compatible display> [attached!] port 0x5000-0x507f mem 0x60000000-0x61ffffff,0x50000000-0x5fffffff,0xcb000000-0xcbffffff irq 16 at device 0.0 on pci1
- pci1: <multimedia, HDA> (vendor 0x10de, dev 0x0e0b) at device 0.1 irq 17
- pci1: <ACPI PCI bus> [attached!] on pcib1
- pcib1: <ACPI PCI-PCI bridge> [attached!] irq 16 at device 1.0 on pci0
- vgapci1.pci0.pcib0.acpi0.nexus0.root0
- vgapci1: <VGA-compatible display> [tentative] port 0x6000-0x603f mem 0xa0000000-0xafffffff,0xcc400000-0xcc7fffff irq 16 at device 2.0 on pci0
- agp0.vgapci1.pci0.pcib0.acpi0.nexus0.root0
- agp0: <Haswell mobile GT2 IG> [tentative] on vgapci1
- vgapci1: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xa0000000
- vgapci1: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xcc400000
- agp0: aperture size is 256M, detected 131068k stolen memory
- agp0: AGP_SNB_GFX_MODE: 00000000
- agp0: AGP_SNB_GCC1: 0x0221
- agp0: Mappable GTT entries: 65536
- agp0: Total GTT entries: 524288
- agp0: <Haswell mobile GT2 IG> [attached!] on vgapci1
- vgapci1: Boot video device
- vgapci1: <VGA-compatible display> [attached!] port 0x6000-0x603f mem 0xa0000000-0xafffffff,0xcc400000-0xcc7fffff irq 16 at device 2.0 on pci0
- xhci0.pci0.pcib0.acpi0.nexus0.root0
- xhci0: <Intel Lynx Point USB 3.0 controller> [tentative] mem 0xcca20000-0xcca2ffff irq 16 at device 20.0 on pci0
- xhci0: attempting to allocate 1 MSI vector (8 supported)
- alloc MSI intr 16 on cpu1
- xhci0: using IRQ 16 on cpu1 for MSI
- xhci0: MSI enabled
- map MSI intr 16 on cpu1
- xhci0: 32 byte context size.
- xhci0: Port routing mask set to 0xffffffff
- usbus0.xhci0.pci0.pcib0.acpi0.nexus0.root0
- usbus0 [tentative] on xhci0
- usbus0 [attached!] on xhci0
- xhci0: <Intel Lynx Point USB 3.0 controller> [attached!] mem 0xcca20000-0xcca2ffff irq 16,16 at device 20.0 on pci0
- pci0: <simple comms> (vendor 0x8086, dev 0x8c3a) at device 22.0 irq 16
- pci0: <simple comms, UART> (vendor 0x8086, dev 0x8c3d) at device 22.3 irq 19
- em0.pci0.pcib0.acpi0.nexus0.root0
- em0: <Intel(R) PRO/1000 Network Connection PCH_LPT_I217_LM 7.3.8> [tentative] port 0x6080-0x609f mem 0xcca3b000-0xcca3bfff,0xcca00000-0xcca1ffff irq 20 at device 25.0 on pci0
- em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xcca00000
- em0: IRQ shared
- em0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xcca3b000
- usbus0: 5.0Gbps Super Speed USB v3.0
- em0: bpf attached
- em0: MAC address: a0:48:1c:d1:23:d6
- ugen0.1: <0x8086> at usbus0
- uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
- em0: <Intel(R) PRO/1000 Network Connection PCH_LPT_I217_LM 7.3.8> [attached!] port 0x6080-0x609f mem 0xcca3b000-0xcca3bfff,0xcca00000-0xcca1ffff irq 20 at device 25.0 on pci0
- ehci0.pci0.pcib0.acpi0.nexus0.root0
- ehci0: <Intel Lynx Point USB 2.0 controller USB-B> [tentative] mem 0xcca3a000-0xcca3a3ff irq 16 at device 26.0 on pci0
- usbus1: EHCI version 1.0
- usbus1.ehci0.pci0.pcib0.acpi0.nexus0.root0
- usbus1: <Intel Lynx Point USB 2.0 controller USB-B> [tentative] on ehci0
- usbus1: usbus1: <Intel Lynx Point USB 2.0 controller USB-B>480Mbps High Speed USB v2.0
- [attached!] on ehci0
- ehci0: <Intel Lynx Point USB 2.0 controller USB-B> [attached!] mem 0xcca3a000-0xcca3a3ff irq 16 at device 26.0 on pci0
- pci0: <multimedia, HDA> (vendor 0x8086, dev 0x8c20) at device 27.0 irq 22
- pcib2.pci0.pcib0.acpi0.nexus0.root0
- pcib2: <ACPI PCI-PCI bridge> [tentative] irq 16 at device 28.0 on pci0
- pcib2: domain 0
- pcib2: secondary bus 2
- pcib2: subordinate bus 58
- pcib2: I/O decode 0xf000-0xfff
- pcib2: memory decode 0xb4000000-0xca0fffff
- pcib2: prefetched decode 0x70000000-0x91ffffff
- pcib2: Disable PCI Express hot-plug interrupts(0x0008)
- pci2.pcib2.pci0.pcib0.acpi0.nexus0.root0
- pci2: <ACPI PCI bus> [tentative] on pcib2
- pci2: domain=0, physical bus=2
- pci2: <ACPI PCI bus> [attached!] on pcib2
- pcib2: <ACPI PCI-PCI bridge> [attached!] irq 16 at device 28.0 on pci0
- pcib3.pci0.pcib0.acpi0.nexus0.root0
- pcib3: <ACPI PCI-PCI bridge> [tentative] irq 16 at device 28.4 on pci0
- pcib3: domain 0
- pcib3: secondary bus 59
- ugen1.1: <Intel> at usbus1
- pcib3: subordinate bus 91
- uhub1: pcib3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
- I/O decode 0x3000-0x4fff
- pcib3: memory decode 0xb0000000-0xb3ffffff
- pcib3: no prefetched decode
- pcib3: Disable PCI Express hot-plug interrupts(0x0008)
- pci59.pcib3.pci0.pcib0.acpi0.nexus0.root0
- pci59: <ACPI PCI bus> [tentative] on pcib3
- pci59: domain=0, physical bus=59
- pci59: <ACPI PCI bus> [attached!] on pcib3
- pcib3: <ACPI PCI-PCI bridge> [attached!] irq 16 at device 28.4 on pci0
- pcib4.pci0.pcib0.acpi0.nexus0.root0
- pcib4: <ACPI PCI-PCI bridge> [tentative] irq 18 at device 28.6 on pci0
- pcib4: domain 0
- pcib4: secondary bus 92
- pcib4: subordinate bus 92
- pcib4: I/O decode 0xf000-0xfff
- pcib4: memory decode 0xcc900000-0xcc9fffff
- pcib4: no prefetched decode
- pci92.pcib4.pci0.pcib0.acpi0.nexus0.root0
- pci92: <ACPI PCI bus> [tentative] on pcib4
- pci92: domain=0, physical bus=92
- found-> vendor=0x8086, dev=0x088e, revid=0x24
- domain=0, bus=92, slot=0, func=0
- class=02-80-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 3 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- PCI Express ver.1 cap=0x0001[DEVICE]
- map[10]: type Memory, range 64, base 0xcc900000, size 13, enabled
- pcib4: requested memory range 0xcc900000-0xcc901fff: good
- pcib4: matched entry for 92.0.INTA
- pcib4: slot 0 INTA hardwired to GSI 18, IRQ 18
- iwn0.pci92.pcib4.pci0.pcib0.acpi0.nexus0.root0
- iwn0: <Intel Centrino Advanced 6235> [tentative] mem 0xcc900000-0xcc901fff irq 18 at device 0.0 on pci92
- iwn0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xcc900000
- iwn0: MIMO 2T2R, AGN, address c4:d9:87:2e:43:3e
- iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
- iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
- iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
- iwn0: 11na MCS: 15Mbps 30Mbps 45Mbps 60Mbps 90Mbps 120Mbps 135Mbps 150Mbps 30Mbps 60Mbps 90Mbps 120Mbps 180Mbps 240Mbps 270Mbps 300Mbps
- iwn0: 11ng MCS: 15Mbps 30Mbps 45Mbps 60Mbps 90Mbps 120Mbps 135Mbps 150Mbps 30Mbps 60Mbps 90Mbps 120Mbps 180Mbps 240Mbps 270Mbps 300Mbps
- iwn0: <Intel Centrino Advanced 6235> [attached!] mem 0xcc900000-0xcc901fff irq 18 at device 0.0 on pci92
- pci92: <ACPI PCI bus> [attached!] on pcib4
- pcib4: <ACPI PCI-PCI bridge> [attached!] irq 18 at device 28.6 on pci0
- pcib5.pci0.pcib0.acpi0.nexus0.root0
- pcib5: <ACPI PCI-PCI bridge> [tentative] irq 19 at device 28.7 on pci0
- pcib5: domain 0
- pcib5: secondary bus 93
- pcib5: subordinate bus 93
- pcib5: I/O decode 0xf000-0xfff
- pcib5: memory decode 0xcc800000-0xcc8fffff
- pcib5: no prefetched decode
- pcib5: Disable PCI Express hot-plug interrupts(0x0008)
- pci93.pcib5.pci0.pcib0.acpi0.nexus0.root0
- pci93: <ACPI PCI bus> [tentative] on pcib5
- pci93: domain=0, physical bus=93
- found-> vendor=0x10ec, dev=0x5249, revid=0x01
- domain=0, bus=93, slot=0, func=0
- class=ff-00-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=5
- powerspec 3 supports D0 D1 D2 D3 current D0
- MSI supports 1 message, 64 bit
- PCI Express ver.2 cap=0x0002[DEVICE]
- map[10]: type Memory, range 32, base 0xcc800000, size 12, enabled
- pcib5: requested memory range 0xcc800000-0xcc800fff: good
- pcib5: matched entry for 93.0.INTA
- pcib5: slot 0 INTA hardwired to GSI 19, IRQ 19
- pci93: <unknown> (vendor 0x10ec, dev 0x5249) at device 0.0 irq 19
- pci93: <ACPI PCI bus> [attached!] on pcib5
- pcib5: <ACPI PCI-PCI bridge> [attached!] irq 19 at device 28.7 on pci0
- ehci1.pci0.pcib0.acpi0.nexus0.root0
- ehci1: <Intel Lynx Point USB 2.0 controller USB-A> [tentative] mem 0xcca39000-0xcca393ff irq 17 at device 29.0 on pci0
- usbus2: EHCI version 1.0
- usbus2.ehci1.pci0.pcib0.acpi0.nexus0.root0
- usbus2: <Intel Lynx Point USB 2.0 controller USB-A> [tentative] on ehci1
- usbus2: usbus2: <Intel Lynx Point USB 2.0 controller USB-A>480Mbps High Speed USB v2.0
- [attached!] on ehci1
- ehci1: <Intel Lynx Point USB 2.0 controller USB-A> [attached!] mem 0xcca39000-0xcca393ff irq 17 at device 29.0 on pci0
- isab0.pci0.pcib0.acpi0.nexus0.root0
- isab0: <PCI-ISA bridge> [tentative] at device 31.0 on pci0
- isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
- isa0: <ISA bus> [tentative] on isab0
- isa0: <ISA bus> [attached!] on isab0
- isab0: <PCI-ISA bridge> [attached!] at device 31.0 on pci0
- ahci0.pci0.pcib0.acpi0.nexus0.root0
- ahci0: <AHCI-PCI-SATA> [tentative] port 0x6060-0x607f,0x60b8-0x60bb,0x60a0-0x60a7,0x60bc-0x60bf,0x60a8-0x60af mem 0xcca38000-0xcca387ff irq 19 at device 31.2 on pci0
- ahci0: attempting to allocate 1 MSI vector (1 supported)
- alloc MSI intr 17 on cpu0
- ahci0: using IRQ 17 on cpu0 for MSI
- ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xcca38000
- ugen2.1: <Intel> at usbus2
- uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
- uhub0: 21 ports with 21 removable, self powered
- uhub1: 3 ports with 3 removable, self powered
- uhub2: 3 ports with 3 removable, self powered
- ugen0.2: <vendor 0x138a> at usbus0
- ahci0: Intel hocus pocus
- ahci0: AHCI 1.3 cap 0xcf30ff65<S64A,NCQ,SSS,SALP,SAL,SCLO,PMD,SSC,PSC,EMS,SXS> cap2 0x4<BOH>, 6 ports, 32 tags/port, gen 3 (6Gbps)
- ahci0.1: Caps 4<POD>
- ahci0.2: Caps 200004<ESP,POD>
- ahci0.1: START HARDRESET
- ahci0.3: Caps 200004<ESP,POD>
- ahci0.2: START HARDRESET
- ahci0.3: START HARDRESET
- ahci0.5: Caps 4<POD>
- ahci0.5: START HARDRESET
- map MSI intr 17 on cpu0
- ugen1.2: <vendor 0x8087> at usbus1
- uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
- ugen2.2: <vendor 0x8087> at usbus2
- uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2
- ugen0.3: <Chicony Electronics Co.,Ltd.> at usbus0
- ugen0.4: <vendor 0x8087> at usbus0
- ahci0.2: Port appears to be unplugged
- ahci0.3: Port appears to be unplugged
- ahci0.1: END HARDRESET 0
- ahci0.5: END HARDRESET 0
- ahci0.1: START SOFTRESET c017<CR,FR,FRE,POD,SUD,ST>
- ahci0.5: START SOFTRESET c017<CR,FR,FRE,POD,SUD,ST>
- ahci0.5: sig 00000101
- ahci0.1: sig eb140101
- ahci0.1: END SOFTRESET
- ahci0.5: END SOFTRESET
- ahci0.1: Found ATAPI "hp CDDVDW SU-208CB HH00" serial="R9366YJDA019YT"
- ahci0.1: tags=0/32 satacap=0402 satacap2=0012 satafea=0068 NCQ=NO capacity=1.00MB
- ahci0.1: f85=4210 f86=0000 f87=4000 WC=notsupp RA=notsupp SEC=notsupp
- ahci0.1: Set dummy xfer mode to 45
- ahci0.1: TFES slot 5 ci_saved = 00000020
- ahci0.1: Copying rfis slot 5
- ahci0.1: Shortening sense request
- (probe0:ahci0:1:0:0): Retrying Command
- (probe0:ahci0:1:0:0): INQUIRY. CDB: 12 1 0 0 ff 0
- (probe0:ahci0:1:0:0): CAM Status: SCSI Status Error
- (probe0:ahci0:1:0:0): SCSI Status: Check Condition
- (probe0:ahci0:1:0:0): ILLEGAL REQUEST asc:24,0
- (probe0:ahci0:1:0:0): Invalid field in CDB
- (probe0:ahci0:1:0:0): (probe0:ahci0:1:0:0): INQUIRY. CDB: 12 1 0 0 ff 0 (probe0:ahci0:1:0:0): ILLEGAL REQUEST asc:24,0
- (probe0:ahci0:1:0:0): Invalid field in CDB
- Unretryable error
- (probe0:ahci0:1:0:0): error 22
- (probe0:ahci0:1:0:0): Unretryable Error
- (probe0:ahci0:1:0:0): Down reving Protocol Version from 2 to 0?
- ahci0.1: TFES slot 7 ci_saved = 00000080
- ahci0.1: Copying rfis slot 7
- (probe0:ahci0:1:1:0): error 22
- (probe0:ahci0:1:1:0): Unretryable Error
- (probe0:ahci0:1:2:0): error 22
- (probe0:ahci0:1:2:0): Unretryable Error
- (probe0:ahci0:1:3:0): error 22
- (probe0:ahci0:1:3:0): Unretryable Error
- (probe0:ahci0:1:4:0): error 22
- (probe0:ahci0:1:4:0): Unretryable Error
- (probe0:ahci0:1:5:0): error 22
- (probe0:ahci0:1:5:0): Unretryable Error
- (probe0:ahci0:1:6:0): error 22
- (probe0:ahci0:1:6:0): Unretryable Error
- (probe0:ahci0:1:7:0): error 22
- (probe0:ahci0:1:7:0): Unretryable Error
- (probe0:ahci0:1:8:0): error 22
- (probe0:ahci0:1:8:0): Unretryable Error
- (probe0:ahci0:1:9:0): error 22
- (probe0:ahci0:1:9:0): Unretryable Error
- (probe0:ahci0:1:10:0): error 22
- (probe0:ahci0:1:10:0): Unretryable Error
- (probe0:ahci0:1:11:0): error 22
- (probe0:ahci0:1:11:0): Unretryable Error
- (probe0:ahci0:1:12:0): error 22
- (probe0:ahci0:1:12:0): Unretryable Error
- (probe0:ahci0:1:13:0): error 22
- (probe0:ahci0:1:13:0): Unretryable Error
- (probe0:ahci0:1:14:0): error 22
- (probe0:ahci0:1:14:0): Unretryable Error
- ahci0.3: No device detected
- ahci0.2: No device detected
- ahci0.3: END HARDRESET 19
- ahci0.2: END HARDRESET 19
- (probe0:ahci0:2:0:0): error 22
- (probe0:ahci0:2:0:0): Unretryable Error
- (probe0:ahci0:2:1:0): error 22
- (probe0:ahci0:2:1:0): Unretryable Error
- (probe0:ahci0:2:2:0): error 22
- (probe0:ahci0:2:2:0): Unretryable Error
- (probe0:ahci0:2:3:0): error 22
- (probe0:ahci0:2:3:0): Unretryable Error
- (probe0:ahci0:2:4:0): error 22
- (probe0:ahci0:2:4:0): Unretryable Error
- (probe0:ahci0:2:5:0): error 22
- (probe0:ahci0:2:5:0): Unretryable Error
- (probe0:ahci0:2:6:0): error 22
- (probe0:ahci0:2:6:0): Unretryable Error
- (probe0:ahci0:2:7:0): error 22
- (probe0:ahci0:2:7:0): Unretryable Error
- (probe0:ahci0:2:8:0): error 22
- (probe0:ahci0:2:8:0): Unretryable Error
- (probe0:ahci0:2:9:0): error 22
- (probe0:ahci0:2:9:0): Unretryable Error
- (probe0:ahci0:2:10:0): error 22
- (probe0:ahci0:2:10:0): Unretryable Error
- (probe0:ahci0:2:11:0): error 22
- (probe0:ahci0:2:11:0): Unretryable Error
- (probe0:ahci0:2:12:0): error 22
- (probe0:ahci0:2:12:0): Unretryable Error
- (probe0:ahci0:2:13:0): error 22
- (probe0:ahci0:2:13:0): Unretryable Error
- (probe0:ahci0:2:14:0): error 22
- (probe0:ahci0:2:14:0): Unretryable Error
- (probe0:ahci0:3:0:0): error 22
- (probe0:ahci0:3:0:0): Unretryable Error
- (probe0:ahci0:3:1:0): error 22
- (probe0:ahci0:3:1:0): Unretryable Error
- (probe0:ahci0:3:2:0): error 22
- (probe0:ahci0:3:2:0): Unretryable Error
- (probe0:ahci0:3:3:0): error 22
- (probe0:ahci0:3:3:0): Unretryable Error
- (probe0:ahci0:3:4:0): error 22
- (probe0:ahci0:3:4:0): Unretryable Error
- (probe0:ahci0:3:5:0): error 22
- (probe0:ahci0:3:5:0): Unretryable Error
- (probe0:ahci0:3:6:0): error 22
- (probe0:ahci0:3:6:0): Unretryable Error
- (probe0:ahci0:3:7:0): error 22
- (probe0:ahci0:3:7:0): Unretryable Error
- (probe0:ahci0:3:8:0): error 22
- (probe0:ahci0:3:8:0): Unretryable Error
- (probe0:ahci0:3:9:0): error 22
- (probe0:ahci0:3:9:0): Unretryable Error
- (probe0:ahci0:3:10:0): error 22
- (probe0:ahci0:3:10:0): Unretryable Error
- (probe0:ahci0:3:11:0): error 22
- (probe0:ahci0:3:11:0): Unretryable Error
- (probe0:ahci0:3:12:0): error 22
- (probe0:ahci0:3:12:0): Unretryable Error
- (probe0:ahci0:3:13:0): error 22
- (probe0:ahci0:3:13:0): Unretryable Error
- (probe0:ahci0:3:14:0): error 22
- (probe0:ahci0:3:14:0): Unretryable Error
- ahci0.5: Found SSD "LITEONIT LMS-32L6M-HP DM51707" serial="002347104559"
- ahci0.5: tags=32/32 satacap=050e satacap2=0086 satafea=014c NCQ=YES capacity=30533.83MB
- ahci0.5: f85=3469 f86=bc01 f87=4123 WC=enabled RA=enabled SEC=frozen
- ahci0.5: Set dummy xfer mode to 46
- (probe0:ahci0:5:1:0): error 22
- (probe0:ahci0:5:1:0): Unretryable Error
- (probe0:ahci0:5:2:0): error 22
- (probe0:ahci0:5:2:0): Unretryable Error
- (probe0:ahci0:5:3:0): error 22
- (probe0:ahci0:5:3:0): Unretryable Error
- (probe0:ahci0:5:4:0): error 22
- (probe0:ahci0:5:4:0): Unretryable Error
- (probe0:ahci0:5:5:0): error 22
- (probe0:ahci0:5:5:0): Unretryable Error
- (probe0:ahci0:5:6:0): error 22
- (probe0:ahci0:5:6:0): Unretryable Error
- (probe0:ahci0:5:7:0): error 22
- (probe0:ahci0:5:7:0): Unretryable Error
- (probe0:ahci0:5:8:0): error 22
- (probe0:ahci0:5:8:0): Unretryable Error
- (probe0:ahci0:5:9:0): error 22
- (probe0:ahci0:5:9:0): Unretryable Error
- (probe0:ahci0:5:10:0): error 22
- (probe0:ahci0:5:10:0): Unretryable Error
- (probe0:ahci0:5:11:0): error 22
- (probe0:ahci0:5:11:0): Unretryable Error
- (probe0:ahci0:5:12:0): error 22
- (probe0:ahci0:5:12:0): Unretryable Error
- (probe0:ahci0:5:13:0): error 22
- (probe0:ahci0:5:13:0): Unretryable Error
- (probe0:ahci0:5:14:0): error 22
- (probe0:ahci0:5:14:0): Unretryable Error
- ahci0: <AHCI-PCI-SATA> [attached!] port 0x6060-0x607f,0x60b8-0x60bb,0x60a0-0x60a7,0x60bc-0x60bf,0x60a8-0x60af mem 0xcca38000-0xcca387ff irq 17,19 at device 31.2 on pci0
- pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x8c22) at device 31.3 irq 18
- pci0: <ACPI PCI bus> [attached!] on pcib0
- pcib0: <ACPI Host-PCI bridge> [attached!] port 0xcf8-0xcff on acpi0
- battery0.acpi0.nexus0.root0
- battery0: <ACPI Control Method Battery> [tentative] on acpi0
- battery0: <ACPI Control Method Battery> [attached!] on acpi0
- battery1.acpi0.nexus0.root0
- battery1: <ACPI Control Method Battery> [tentative] on acpi0
- battery1: <ACPI Control Method Battery> [attached!] on acpi0
- acpi_acad0.acpi0.nexus0.root0
- acpi_acad0: <AC Adapter> [tentative] on acpi0
- acpi_acad0: <AC Adapter> [attached!] on acpi0
- acpi_button0.acpi0.nexus0.root0
- acpi_button0: <Sleep Button> [tentative] on acpi0
- acpi_button0: <Sleep Button> [attached!] on acpi0
- acpi_lid0.acpi0.nexus0.root0
- acpi_lid0: <Control Method Lid Switch> [tentative] on acpi0
- acpi_lid0: <Control Method Lid Switch> [attached!] on acpi0
- unknown: not probed (disabled)
- acpi_tz0.acpi0.nexus0.root0
- acpi_tz0: <Thermal Zone> [tentative] on acpi0
- acpi_tz0: <Thermal Zone> [attached!] on acpi0
- acpi_tz1.acpi0.nexus0.root0
- acpi_tz1: <Thermal Zone> [tentative] on acpi0
- ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20140828/psargs-393)
- ACPI Error: Method parse/execution failed [\\_TZ_.PSL_] (Node 0xffffffe03aa906f8), AE_NOT_FOUND (20140828/psparse-552)
- ACPI Error: Method parse/execution failed [\\_TZ_.GFXZ._PSL] (Node 0xffffffe03aa8ffa8), AE_NOT_FOUND (20140828/psparse-552)
- acpi_tz1: <Thermal Zone> [attached!] on acpi0
- acpi_tz2.acpi0.nexus0.root0
- acpi_tz2: <Thermal Zone> [tentative] on acpi0
- acpi_tz2: <Thermal Zone> [attached!] on acpi0
- acpi_tz3.acpi0.nexus0.root0
- acpi_tz3: <Thermal Zone> [tentative] on acpi0
- acpi_tz3: <Thermal Zone> [attached!] on acpi0
- acpi_tz4.acpi0.nexus0.root0
- acpi_tz4: <Thermal Zone> [tentative] on acpi0
- ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20140828/psargs-393)
- ACPI Error: Method parse/execution failed [\\_TZ_.PSL_] (Node 0xffffffe03aa906f8), AE_NOT_FOUND (20140828/psparse-552)
- ACPI Error: Method parse/execution failed [\\_TZ_.BATZ._PSL] (Node 0xffffffe03aa90398), AE_NOT_FOUND (20140828/psparse-552)
- acpi_tz4: <Thermal Zone> [attached!] on acpi0
- acpi_tz5.acpi0.nexus0.root0
- acpi_tz5: <Thermal Zone> [tentative] on acpi0
- acpi_tz5: <Thermal Zone> [attached!] on acpi0
- acpi_tz6.acpi0.nexus0.root0
- acpi_tz6: <Thermal Zone> [tentative] on acpi0
- acpi_tz6: <Thermal Zone> [attached!] on acpi0
- acpi_tz7.acpi0.nexus0.root0
- acpi_tz7: <Thermal Zone> [tentative] on acpi0
- acpi_tz7: <Thermal Zone> [attached!] on acpi0
- unknown: not probed (disabled)
- unknown: not probed (disabled)
- unknown: not probed (disabled)
- unknown: not probed (disabled)
- atkbdc0.acpi0.nexus0.root0
- atkbdc0: <Keyboard controller (i8042)> [tentative] port 0x64,0x60 irq 1 on acpi0
- atkbd0.atkbdc0.acpi0.nexus0.root0
- atkbd0: <AT Keyboard> [tentative] irq 1 on atkbdc0
- kbd0 at atkbd0
- kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000
- atkbd0: <AT Keyboard> [attached!] irq 1 on atkbdc0
- psm0: current command byte:0047
- psm0.atkbdc0.acpi0.nexus0.root0
- psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
- uhub3: psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
- 6 ports with 6 removable, self powered
- psm0: config:00000000, flags:00000008, packet size:3
- psm0: syncmask:c0, syncbits:00
- psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
- atkbdc0: <Keyboard controller (i8042)> [attached!] port 0x64,0x60 irq 1 on acpi0
- unknown: not probed (disabled)
- ppc0: using extended I/O port range
- ppc0: ECP SPP ECP+EPP SPP
- ppc0.acpi0.nexus0.root0
- ppc0: <ECP parallel printer port> [tentative] port 0x778-0x77a,0x378-0x37f irq 5 on acpi0
- ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
- ppc0: FIFO with 16/16/15 bytes threshold
- ppbus0.ppc0.acpi0.nexus0.root0
- ppbus0: <Parallel port bus> [tentative] on ppc0
- uhub4: 8 ports with 8 removable, self powered
- plip0.ppbus0.ppc0.acpi0.nexus0.root0
- plip0: <PLIP network interface> [tentative] on ppbus0
- lp0: bpf attached
- plip0: <PLIP network interface> [attached!] on ppbus0
- lpt0.ppbus0.ppc0.acpi0.nexus0.root0
- lpt0: <Printer> [tentative] on ppbus0
- lpt0: Interrupt-driven port
- lpt0: <Printer> [attached!] on ppbus0
- ppi0.ppbus0.ppc0.acpi0.nexus0.root0
- ppi0: <Parallel I/O> [tentative] on ppbus0
- ppi0: <Parallel I/O> [attached!] on ppbus0
- ppbus0: <Parallel port bus> [attached!] on ppc0
- ppc0: <ECP parallel printer port> [attached!] port 0x778-0x77a,0x378-0x37f irq 5 on acpi0
- cpu0.acpi0.nexus0.root0
- cpu0: <ACPI CPU> [tentative] on acpi0
- ACPI: Dynamic OEM Table Load:
- ACPI: SSDT 0xFFFFFFE1F10FD400 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
- cpu_cst0.cpu0.acpi0.nexus0.root0
- cpu_cst0: <ACPI CPU C-State> [tentative] on cpu0
- C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
- C2 -> cpu specific C4 sub state 3
- cpu_cst0: non-C3 0
- cpu_cst0: <ACPI CPU C-State> [attached!] on cpu0
- cpu_pst0.cpu0.acpi0.nexus0.root0
- cpu_pst0: <ACPI CPU P-State> [tentative] on cpu0
- cpu_pst0: create pkg domain0, coord 0xfe
- cpu_pst0: control reg 127 0
- cpu_pst0: status reg 127 0
- cpu_pst0: freq 2701, pwr 47000, xlat 10, blat 10, cv 00002900, sv 00002900
- cpu_pst0: freq 2700, pwr 47000, xlat 10, blat 10, cv 00001b00, sv 00001b00
- cpu_pst0: freq 2600, pwr 44607, xlat 10, blat 10, cv 00001a00, sv 00001a00
- cpu_pst0: freq 2400, pwr 39957, xlat 10, blat 10, cv 00001800, sv 00001800
- cpu_pst0: freq 2300, pwr 38149, xlat 10, blat 10, cv 00001700, sv 00001700
- cpu_pst0: freq 2200, pwr 35930, xlat 10, blat 10, cv 00001600, sv 00001600
- cpu_pst0: freq 2000, pwr 32066, xlat 10, blat 10, cv 00001400, sv 00001400
- cpu_pst0: freq 1900, pwr 29974, xlat 10, blat 10, cv 00001300, sv 00001300
- cpu_pst0: freq 1700, pwr 25918, xlat 10, blat 10, cv 00001100, sv 00001100
- cpu_pst0: freq 1600, pwr 24372, xlat 10, blat 10, cv 00001000, sv 00001000
- cpu_pst0: freq 1500, pwr 22444, xlat 10, blat 10, cv 00000f00, sv 00000f00
- cpu_pst0: freq 1300, pwr 19111, xlat 10, blat 10, cv 00000d00, sv 00000d00
- cpu_pst0: freq 1200, pwr 17302, xlat 10, blat 10, cv 00000c00, sv 00000c00
- cpu_pst0: freq 1100, pwr 15534, xlat 10, blat 10, cv 00000b00, sv 00000b00
- cpu_pst0: freq 900, pwr 12498, xlat 10, blat 10, cv 00000900, sv 00000900
- cpu_pst0: freq 800, pwr 10844, xlat 10, blat 10, cv 00000800, sv 00000800
- cpu_pst0: _PPC 0
- cpu_pst0: <ACPI CPU P-State> [attached!] on cpu0
- clockmod0.cpu0.acpi0.nexus0.root0
- clockmod0: <CPU clock modulation> [tentative] on cpu0
- clock modulation:
- 0x0000 100.00%
- 0x001f 93.75%
- 0x001e 87.50%
- 0x001d 81.25%
- 0x001c 75.00%
- 0x001b 68.75%
- 0x001a 62.50%
- 0x0019 56.25%
- 0x0018 50.00%
- 0x0017 43.75%
- 0x0016 37.50%
- 0x0015 31.25%
- 0x0014 25.00%
- 0x0013 18.75%
- 0x0012 12.50%
- 0x0011 6.25%
- clockmod0: <CPU clock modulation> [attached!] on cpu0
- perfbias0.cpu0.acpi0.nexus0.root0
- perfbias0: <CPU perf-energy bias> [tentative] on cpu0
- perfbias0: <CPU perf-energy bias> [attached!] on cpu0
- coretemp0.cpu0.acpi0.nexus0.root0
- coretemp0: <CPU On-Die Thermal Sensors> [tentative] on cpu0
- coretemp0: Setting TjMax=100
- coretemp0: <CPU On-Die Thermal Sensors> [attached!] on cpu0
- cpu0: <ACPI CPU> [attached!] on acpi0
- cpu1.acpi0.nexus0.root0
- cpu1: <ACPI CPU> [tentative] on acpi0
- ACPI: Dynamic OEM Table Load:
- ACPI: SSDT 0xFFFFFFE1EF902A80 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
- ACPI: Dynamic OEM Table Load:
- ACPI: SSDT 0xFFFFFFE03AB995A0 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
- cpu_cst1.cpu1.acpi0.nexus0.root0
- cpu_cst1: <ACPI CPU C-State> [tentative] on cpu1
- C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
- C2 -> cpu specific C4 sub state 3
- cpu_cst1: non-C3 0
- cpu_cst1: <ACPI CPU C-State> [attached!] on cpu1
- cpu_pst1.cpu1.acpi0.nexus0.root0
- cpu_pst1: <ACPI CPU P-State> [tentative] on cpu1
- cpu_pst1: control reg 127 0
- cpu_pst1: status reg 127 0
- cpu_pst1: _PPC 0
- cpu_pst1: <ACPI CPU P-State> [attached!] on cpu1
- clockmod1.cpu1.acpi0.nexus0.root0
- clockmod1: <CPU clock modulation> [tentative] on cpu1
- clockmod1: <CPU clock modulation> [attached!] on cpu1
- perfbias1.cpu1.acpi0.nexus0.root0
- perfbias1: <CPU perf-energy bias> [tentative] on cpu1
- perfbias1: <CPU perf-energy bias> [attached!] on cpu1
- coretemp1.cpu1.acpi0.nexus0.root0
- coretemp1: <CPU On-Die Thermal Sensors> [tentative] on cpu1
- coretemp1: Setting TjMax=100
- coretemp1: <CPU On-Die Thermal Sensors> [attached!] on cpu1
- cpu1: <ACPI CPU> [attached!] on acpi0
- cpu2.acpi0.nexus0.root0
- cpu2: <ACPI CPU> [tentative] on acpi0
- cpu_cst2.cpu2.acpi0.nexus0.root0
- cpu_cst2: <ACPI CPU C-State> [tentative] on cpu2
- C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
- C2 -> cpu specific C4 sub state 3
- cpu_cst2: non-C3 0
- cpu_cst2: <ACPI CPU C-State> [attached!] on cpu2
- cpu_pst2.cpu2.acpi0.nexus0.root0
- cpu_pst2: <ACPI CPU P-State> [tentative] on cpu2
- cpu_pst2: control reg 127 0
- cpu_pst2: status reg 127 0
- cpu_pst2: _PPC 0
- cpu_pst2: <ACPI CPU P-State> [attached!] on cpu2
- clockmod2.cpu2.acpi0.nexus0.root0
- clockmod2: <CPU clock modulation> [tentative] on cpu2
- clockmod2: <CPU clock modulation> [attached!] on cpu2
- perfbias2.cpu2.acpi0.nexus0.root0
- perfbias2: <CPU perf-energy bias> [tentative] on cpu2
- perfbias2: <CPU perf-energy bias> [attached!] on cpu2
- coretemp2.cpu2.acpi0.nexus0.root0
- coretemp2: <CPU On-Die Thermal Sensors> [tentative] on cpu2
- coretemp2: Setting TjMax=100
- coretemp2: <CPU On-Die Thermal Sensors> [attached!] on cpu2
- cpu2: <ACPI CPU> [attached!] on acpi0
- cpu3.acpi0.nexus0.root0
- cpu3: <ACPI CPU> [tentative] on acpi0
- cpu_cst3.cpu3.acpi0.nexus0.root0
- cpu_cst3: <ACPI CPU C-State> [tentative] on cpu3
- C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
- C2 -> cpu specific C4 sub state 3
- cpu_cst3: non-C3 0
- cpu_cst3: <ACPI CPU C-State> [attached!] on cpu3
- cpu_pst3.cpu3.acpi0.nexus0.root0
- cpu_pst3: <ACPI CPU P-State> [tentative] on cpu3
- cpu_pst3: control reg 127 0
- cpu_pst3: status reg 127 0
- cpu_pst3: _PPC 0
- cpu_pst3: <ACPI CPU P-State> [attached!] on cpu3
- clockmod3.cpu3.acpi0.nexus0.root0
- clockmod3: <CPU clock modulation> [tentative] on cpu3
- clockmod3: <CPU clock modulation> [attached!] on cpu3
- perfbias3.cpu3.acpi0.nexus0.root0
- perfbias3: <CPU perf-energy bias> [tentative] on cpu3
- perfbias3: <CPU perf-energy bias> [attached!] on cpu3
- coretemp3.cpu3.acpi0.nexus0.root0
- coretemp3: <CPU On-Die Thermal Sensors> [tentative] on cpu3
- coretemp3: Setting TjMax=100
- coretemp3: <CPU On-Die Thermal Sensors> [attached!] on cpu3
- cpu3: <ACPI CPU> [attached!] on acpi0
- cpu4.acpi0.nexus0.root0
- cpu4: <ACPI CPU> [tentative] on acpi0
- cpu_cst4.cpu4.acpi0.nexus0.root0
- cpu_cst4: <ACPI CPU C-State> [tentative] on cpu4
- C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
- C2 -> cpu specific C4 sub state 3
- cpu_cst4: non-C3 0
- cpu_cst4: <ACPI CPU C-State> [attached!] on cpu4
- cpu_pst4.cpu4.acpi0.nexus0.root0
- cpu_pst4: <ACPI CPU P-State> [tentative] on cpu4
- cpu_pst4: control reg 127 0
- cpu_pst4: status reg 127 0
- cpu_pst4: _PPC 0
- cpu_pst4: <ACPI CPU P-State> [attached!] on cpu4
- clockmod4.cpu4.acpi0.nexus0.root0
- clockmod4: <CPU clock modulation> [tentative] on cpu4
- clockmod4: <CPU clock modulation> [attached!] on cpu4
- perfbias4.cpu4.acpi0.nexus0.root0
- perfbias4: <CPU perf-energy bias> [tentative] on cpu4
- perfbias4: <CPU perf-energy bias> [attached!] on cpu4
- coretemp4.cpu4.acpi0.nexus0.root0
- coretemp4: <CPU On-Die Thermal Sensors> [tentative] on cpu4
- coretemp4: Setting TjMax=100
- coretemp4: <CPU On-Die Thermal Sensors> [attached!] on cpu4
- cpu4: <ACPI CPU> [attached!] on acpi0
- cpu5.acpi0.nexus0.root0
- cpu5: <ACPI CPU> [tentative] on acpi0
- cpu_cst5.cpu5.acpi0.nexus0.root0
- cpu_cst5: <ACPI CPU C-State> [tentative] on cpu5
- C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
- C2 -> cpu specific C4 sub state 3
- cpu_cst5: non-C3 0
- cpu_cst5: <ACPI CPU C-State> [attached!] on cpu5
- cpu_pst5.cpu5.acpi0.nexus0.root0
- cpu_pst5: <ACPI CPU P-State> [tentative] on cpu5
- cpu_pst5: control reg 127 0
- cpu_pst5: status reg 127 0
- cpu_pst5: _PPC 0
- cpu_pst5: <ACPI CPU P-State> [attached!] on cpu5
- clockmod5.cpu5.acpi0.nexus0.root0
- clockmod5: <CPU clock modulation> [tentative] on cpu5
- clockmod5: <CPU clock modulation> [attached!] on cpu5
- perfbias5.cpu5.acpi0.nexus0.root0
- perfbias5: <CPU perf-energy bias> [tentative] on cpu5
- perfbias5: <CPU perf-energy bias> [attached!] on cpu5
- coretemp5.cpu5.acpi0.nexus0.root0
- coretemp5: <CPU On-Die Thermal Sensors> [tentative] on cpu5
- coretemp5: Setting TjMax=100
- coretemp5: <CPU On-Die Thermal Sensors> [attached!] on cpu5
- cpu5: <ACPI CPU> [attached!] on acpi0
- cpu6.acpi0.nexus0.root0
- cpu6: <ACPI CPU> [tentative] on acpi0
- cpu_cst6.cpu6.acpi0.nexus0.root0
- cpu_cst6: <ACPI CPU C-State> [tentative] on cpu6
- C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
- C2 -> cpu specific C4 sub state 3
- cpu_cst6: non-C3 0
- cpu_cst6: <ACPI CPU C-State> [attached!] on cpu6
- cpu_pst6.cpu6.acpi0.nexus0.root0
- cpu_pst6: <ACPI CPU P-State> [tentative] on cpu6
- cpu_pst6: control reg 127 0
- cpu_pst6: status reg 127 0
- cpu_pst6: _PPC 0
- cpu_pst6: <ACPI CPU P-State> [attached!] on cpu6
- clockmod6.cpu6.acpi0.nexus0.root0
- clockmod6: <CPU clock modulation> [tentative] on cpu6
- clockmod6: <CPU clock modulation> [attached!] on cpu6
- perfbias6.cpu6.acpi0.nexus0.root0
- perfbias6: <CPU perf-energy bias> [tentative] on cpu6
- perfbias6: <CPU perf-energy bias> [attached!] on cpu6
- coretemp6.cpu6.acpi0.nexus0.root0
- coretemp6: <CPU On-Die Thermal Sensors> [tentative] on cpu6
- coretemp6: Setting TjMax=100
- coretemp6: <CPU On-Die Thermal Sensors> [attached!] on cpu6
- cpu6: <ACPI CPU> [attached!] on acpi0
- cpu7.acpi0.nexus0.root0
- cpu7: <ACPI CPU> [tentative] on acpi0
- cpu_cst7.cpu7.acpi0.nexus0.root0
- cpu_cst7: <ACPI CPU C-State> [tentative] on cpu7
- C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
- C2 -> cpu specific C4 sub state 3
- cpu_cst7: non-C3 0
- cpu_cst7: <ACPI CPU C-State> [attached!] on cpu7
- cpu_pst7.cpu7.acpi0.nexus0.root0
- cpu_pst7: <ACPI CPU P-State> [tentative] on cpu7
- cpu_pst7: control reg 127 0
- cpu_pst7: status reg 127 0
- cpu_pst7: _PPC 0
- cpu_pst7: <ACPI CPU P-State> [attached!] on cpu7
- clockmod7.cpu7.acpi0.nexus0.root0
- clockmod7: <CPU clock modulation> [tentative] on cpu7
- clockmod7: <CPU clock modulation> [attached!] on cpu7
- perfbias7.cpu7.acpi0.nexus0.root0
- perfbias7: <CPU perf-energy bias> [tentative] on cpu7
- perfbias7: <CPU perf-energy bias> [attached!] on cpu7
- coretemp7.cpu7.acpi0.nexus0.root0
- coretemp7: <CPU On-Die Thermal Sensors> [tentative] on cpu7
- coretemp7: Setting TjMax=100
- coretemp7: <CPU On-Die Thermal Sensors> [attached!] on cpu7
- cpu7: <ACPI CPU> [attached!] on acpi0
- unknown: not probed (disabled)
- unknown: not probed (disabled)
- unknown: not probed (disabled)
- unknown: not probed (disabled)
- unknown: not probed (disabled)
- unknown: not probed (disabled)
- unknown: not probed (disabled)
- unknown: not probed (disabled)
- unknown: not probed (disabled)
- ACPI: Enabled 7 GPEs in block 00 to 3F
- acpi0: <HPQOEM SLIC-MPC> [attached!] at port 0x800-0x87f,0x2e-0x2f,0x4e-0x4f,0x61,0x63,0x65,0x67,0x70,0x80,0x92,0xb2-0xb3,0x200-0x27f,0xffff,0xffff,0xffff,0x1800-0x18fe,0xef80-0xef9f iomem 0x20000000-0x201fffff,0x40004000-0x40004fff,0xfed1c000-0xfed1ffff,0-0x7fff,0-0xfff,0-0xfff,0-0xfffffff,0xfed20000-0xfed3ffff,0xfed90000-0xfed93fff,0xfed45000-0xfed8ffff,0xfec00000-0xfec00fff,0x4f210000-0x4f21ffff irq 9 on motherboard
- atkbdc-: atkbdc0 exists, using next available unit number
- ppc-: ppc0 exists, using next available unit number
- Trying Read_Port at 203
- Trying Read_Port at 243
- Trying Read_Port at 283
- Trying Read_Port at 2c3
- Trying Read_Port at 303
- Trying Read_Port at 343
- Trying Read_Port at 383
- Trying Read_Port at 3c3
- isa_probe_children: disabling PnP devices
- isa_probe_children: probing non-PnP devices
- pmtimer0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
- pmtimer0 [tentative] on isa0
- pmtimer0 [attached!] on isa0
- adv0 [tentative] failed to probe on isa0
- atkbdc1: <Keyboard controller (i8042)> [tentative] failed to probe at port 0x60 on isa0
- vga0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
- vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- fb0: vga0, vga, type:VGA (5), flags:0x7007f
- fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
- fb0: init mode:24, bios mode:3, current mode:24
- fb0: window:0xffffffff800b8000 size:32k gran:32k, buf:0 size:32k
- VGA parameters upon power-up
- 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
- bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
- b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
- 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
- VGA parameters in BIOS for mode 24
- 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
- bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
- b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
- 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
- VGA parameters to be used for mode 24
- 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
- bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
- b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
- 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
- vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- sc0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0
- sc0: <System console> [tentative] at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
- sc0: <System console> [attached!] at flags 0x100 on isa0
- lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
- it0 [tentative] failed to probe at port 0x290-0x297 on isa0
- it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
- it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
- it3 [tentative] failed to probe at port 0x228-0x22f on isa0
- wbsio0: wbsio_probe port 0x2e: Device ID 0x00, Rev 0x00
- wbsio0 [tentative] failed to probe at port 0x2e-0x2f on isa0
- wbsio1 [tentative] failed to probe at port 0x4e-0x4f on isa0
- sio0: can't drain, serial port might not exist, disabling
- sio0 [tentative] failed to probe at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
- sio1: can't drain, serial port might not exist, disabling
- sio1 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
- sio2: not probed (disabled)
- sio3: not probed (disabled)
- ppc1: cannot reserve I/O port range
- ppc1: <Parallel port> [tentative] failed to probe at irq 7 on isa0
- lnc0: not probed (disabled)
- cs0: not probed (disabled)
- sn0: not probed (disabled)
- isa_probe_children: probing PnP devices
- battery0: battery initialization start
- faith0: bpf attached
- lo0: bpf attached
- ppp0: bpf attached
- sl0: bpf attached
- hptrr: no controller detected.
- hpt27xx: no controller detected.
- CAM: Configuring bus: ahci0
- CAM: Configuring bus: ahci0
- CAM: Configuring bus: ahci0
- CAM: Configuring bus: ahci0
- CAM: Configuring 4 busses
- (probe1:ahci0:2:0:0): error 22
- (probe1:ahci0:2:0:0): Unretryable Error
- (probe1:ahci0:2:1:0): error 22
- (probe1:ahci0:2:1:0): Unretryable Error
- (probe1:ahci0:2:2:0): error 22
- ahci0.1: TFES slot 8 ci_saved = 00000100
- (probe1:ahci0.1: Copying rfis slot 8
- ahci0:2:2:0): Unretryable Error
- (probe1:ahci0:2:3:0): error 22
- (probe1:ahci0:2:3:0): Unretryable Error
- (probe1:ahci0:2:4:0): error 22
- (probe1:ahci0:2:4:0): Unretryable Error
- (probe1:ahci0:2:5:0): error 22
- (probe1:ahci0:2:5:0): Unretryable Error
- (probe1:ahci0:2:6:0): error 22
- (probe1:ahci0:2:6:0): Unretryable Error
- (probe1:ahci0:2:7:0): error 22
- (probe1:ahci0:2:7:0): Unretryable Error
- (probe1:ahci0:2:8:0): error 22
- (probe1:ahci0:2:8:0): Unretryable Error
- (probe1:ahci0:2:9:0): error 22
- (probe1:ahci0:2:9:0): Unretryable Error
- (probe1:ahci0:2:10:0): error 22
- (probe1:ahci0:2:10:0): Unretryable Error
- (probe1:ahci0:2:11:0): error 22
- (probe1:ahci0:2:11:0): Unretryable Error
- (probe1:ahci0:2:12:0): error 22
- (probe1:ahci0:2:12:0): Unretryable Error
- (probe1:ahci0:2:13:0): error 22
- (probe1:ahci0:2:13:0): Unretryable Error
- (probe1:ahci0:2:14:0): error 22
- (probe1:ahci0:2:14:0): Unretryable Error
- CAM: Finished configuring bus: ahci0
- (probe2:ahci0:3:0:0): error 22
- (probe2:ahci0:3:0:0): Unretryable Error
- (probe1:ahci0:3:1:0): error 22
- (probe1:ahci0:3:1:0): Unretryable Error
- (probe1:ahci0:3:2:0): error 22
- (probe1:ahci0:3:2:0): Unretryable Error
- (probe1:ahci0:3:3:0): error 22
- (probe1:ahci0:3:3:0): Unretryable Error
- (probe1:ahci0:3:4:0): error 22
- (probe1:ahci0:3:4:0): Unretryable Error
- (probe1:ahci0:3:5:0): error 22
- (probe1:ahci0:3:5:0): Unretryable Error
- (probe1:ahci0:3:6:0): error 22
- (probe1:ahci0:3:6:0): Unretryable Error
- (probe1:ahci0:3:7:0): error 22
- (probe1:ahci0:3:7:0): Unretryable Error
- (probe1:ahci0:3:8:0): error 22
- (probe1:ahci0:3:8:0): Unretryable Error
- (probe1:ahci0:3:9:0): error 22
- (probe1:ahci0:3:9:0): Unretryable Error
- (probe1:ahci0:3:10:0): error 22
- (probe1:ahci0:3:10:0): Unretryable Error
- (probe1:ahci0:3:11:0): error 22
- (probe1:ahci0:3:11:0): Unretryable Error
- (probe1:ahci0:3:12:0): error 22
- (probe1:ahci0:3:12:0): Unretryable Error
- (probe1:ahci0:3:13:0): error 22
- (probe1:ahci0:3:13:0): Unretryable Error
- (probe1:ahci0:3:14:0): error 22
- (probe1:ahci0:3:14:0): Unretryable Error
- CAM: Finished configuring bus: ahci0
- (probe1:ahci0:5:1:0): error 22
- (probe1:ahci0:5:1:0): Unretryable Error
- (probe1:ahci0:5:2:0): error 22
- (probe1:ahci0:5:2:0): Unretryable Error
- (probe1:ahci0:5:3:0): error 22
- (probe1:ahci0:5:3:0): Unretryable Error
- (probe1:ahci0:5:4:0): error 22
- (probe1:ahci0:5:4:0): Unretryable Error
- (probe1:ahci0:5:5:0): error 22
- (probe1:ahci0:5:5:0): Unretryable Error
- (probe1:ahci0:5:6:0): error 22
- (probe1:ahci0:5:6:0): Unretryable Error
- (probe1:ahci0:5:7:0): error 22
- (probe1:ahci0:5:7:0): Unretryable Error
- (probe1:ahci0:5:8:0): error 22
- (probe1:ahci0:5:8:0): Unretryable Error
- (probe1:ahci0:5:9:0): error 22
- (probe1:ahci0:5:9:0): Unretryable Error
- (probe1:ahci0:5:10:0): error 22
- (probe1:ahci0:5:10:0): Unretryable Error
- (probe1:ahci0:5:11:0): error 22
- (probe1:ahci0:5:11:0): Unretryable Error
- (probe1:ahci0:5:12:0): error 22
- (probe1:ahci0:5:12:0): Unretryable Error
- (probe1:ahci0:5:13:0): error 22
- (probe1:ahci0:5:13:0): Unretryable Error
- (probe1:ahci0:5:14:0): error 22
- (probe1:ahci0:5:14:0): Unretryable Error
- CAM: Finished configuring bus: ahci0
- ahci0.1: TFES slot 11 ci_saved = 00000800
- ahci0.1: Copying rfis slot 11
- ahci0.1: Shortening sense request
- (probe0:ahci0:1:0:0): Retrying Command
- (probe0:ahci0:1:0:0): INQUIRY. CDB: 12 1 0 0 ff 0
- (probe0:ahci0:1:0:0): CAM Status: SCSI Status Error
- (probe0:ahci0:1:0:0): SCSI Status: Check Condition
- (probe0:ahci0:1:0:0): ILLEGAL REQUEST asc:24,0
- (probe0:ahci0:1:0:0): Invalid field in CDB
- (probe0:ahci0:1:0:0): (probe0:ahci0:1:0:0): INQUIRY. CDB: 12 1 0 0 ff 0 (probe0:ahci0:1:0:0): ILLEGAL REQUEST asc:24,0
- (probe0:ahci0:1:0:0): Invalid field in CDB
- Unretryable error
- (probe0:ahci0:1:0:0): error 22
- (probe0:ahci0:1:0:0): Unretryable Error
- (probe0:ahci0:1:1:0): error 22
- (probe0:ahci0:1:1:0): Unretryable Error
- (probe0:ahci0:1:2:0): error 22
- (probe0:ahci0:1:2:0): Unretryable Error
- (probe0:ahci0:1:3:0): error 22
- (probe0:ahci0:1:3:0): Unretryable Error
- (probe0:ahci0:1:4:0): error 22
- (probe0:ahci0:1:4:0): Unretryable Error
- (probe0:ahci0:1:5:0): error 22
- (probe0:ahci0:1:5:0): Unretryable Error
- (probe0:ahci0:1:6:0): error 22
- (probe0:ahci0:1:6:0): Unretryable Error
- (probe0:ahci0:1:7:0): error 22
- (probe0:ahci0:1:7:0): Unretryable Error
- (probe0:ahci0:1:8:0): error 22
- (probe0:ahci0:1:8:0): Unretryable Error
- (probe0:ahci0:1:9:0): error 22
- (probe0:ahci0:1:9:0): Unretryable Error
- (probe0:ahci0:1:10:0): error 22
- (probe0:ahci0:1:10:0): Unretryable Error
- (probe0:ahci0:1:11:0): error 22
- (probe0:ahci0:1:11:0): Unretryable Error
- (probe0:ahci0:1:12:0): error 22
- (probe0:ahci0:1:12:0): Unretryable Error
- (probe0:ahci0:1:13:0): error 22
- (probe0:ahci0:1:13:0): Unretryable Error
- (probe0:ahci0:1:14:0): error 22
- (probe0:ahci0:1:14:0): Unretryable Error
- CAM: Finished configuring bus: ahci0
- CAM: finished configuring all busses
- No policy for da0 specified, or policy not found
- disk scheduler: set policy of da0 to noop
- da0: si_iosize_max:131072
- No policy for cd0 specified, or policy not found
- disk scheduler: set policy of cd0 to noop
- pass0 at ahci0 bus 1 target 0 lun 0
- pass0: <hp CDDVDW SU-208CB HH00> Removable CD-ROM SCSI-0 device
- pass0: 150.000MB/s transfers
- pass1 at ahci0 bus 5 target 0 lun 0
- ahci0.1: TFES slot 13 ci_saved = 00002000
- pass1: ahci0.1: Copying rfis slot 13
- pass1: Serial Number 002347104559
- pass1: 600.000MB/s transfers
- sg0 at ahci0 bus 1 target 0 lun 0
- sg0: <hp CDDVDW SU-208CB HH00> Removable CD-ROM SCSI-0 device
- sg0: 150.000MB/s transfers
- sg1 at ahci0 bus 5 target 0 lun 0
- sg1: <SATA LITEONIT LMS-32L DM51> Fixed Direct Access SCSI-4 device
- sg1: Serial Number 002347104559
- sg1: 600.000MB/s transfers
- da0 at ahci0 bus 5 target 0 lun 0
- da0: <SATA LITEONIT LMS-32L DM51> Fixed Direct Access SCSI-4 device
- da0: Serial Number 002347104559
- da0: 600.000MB/s transfers
- da0: 30533MB (62533296 512 byte sectors: 255H 63S/T 3892C)
- da0: supports TRIM
- ahci0.1: Shortening sense request
- (cd0:ahci0:1:0:0): Retrying Command
- (cd0:ahci0:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
- (cd0:ahci0:1:0:0): CAM Status: SCSI Status Error
- (cd0:ahci0:1:0:0): SCSI Status: Check Condition
- (cd0:ahci0:1:0:0): NOT READY asc:3a,1
- (cd0:ahci0:1:0:0): Medium not present - tray closed
- (cd0:ahci0:1:0:0): (cd0:ahci0:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ahci0:1:0:0): NOT READY asc:3a,1
- (cd0:ahci0:1:0:0): Medium not present - tray closed
- Unretryable error
- (cd0:ahci0:1:0:0): error 6
- (cd0:ahci0:1:0:0): Unretryable Error
- cd0 at ahci0 bus 1 target 0 lun 0
- cd0: <hp CDDVDW SU-208CB HH00> Removable CD-ROM SCSI-0 device
- cd0: 150.000MB/s transfers
- cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
- da0: type 0xa5, start 63, end = 62512127, size 62512065 : OK
- battery0: battery initialization done, tried 1 times
- battery1: battery initialization start
- no B_DEVMAGIC (bootdev=0)
- ATA PseudoRAID loaded
- Mounting root from ufs:/dev/serno/002347104559.s1a
- DMA space used: 11536k, remaining available: 16384k
- Mounting devfs
- start_init: trying /sbin/init
- acpi_acad0: On Line
- em0: Link is up 1000 Mbps Full Duplex
- em0: Link is Down
- em0: Link is up 1000 Mbps Full Duplex
- battery1: battery initialization failed, giving up
- acpi_acad0: acline initialization start
- acpi_acad0: acline initialization done, tried 1 times
- cpu_cst: global Cx count 2
- C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
- C2 -> cpu specific C4 sub state 3
- C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
- C2 -> cpu specific C4 sub state 3
- C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
- C2 -> cpu specific C4 sub state 3
- C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
- C2 -> cpu specific C4 sub state 3
- C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
- C2 -> cpu specific C4 sub state 3
- C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
- C2 -> cpu specific C4 sub state 3
- C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
- C2 -> cpu specific C4 sub state 3
- C2: BitWidth(vendor) 1, BitOffset(class) 2, Address(arg0) 0x33, AccessWidth(arg1) 0x1
- C2 -> cpu specific C4 sub state 3
- ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20140828/psargs-393)
- ACPI Error: Method parse/execution failed [\\_TZ_.PSL_] (Node 0xffffffe03aa906f8), AE_NOT_FOUND (20140828/psparse-552)
- ACPI Error: Method parse/execution failed [\\_TZ_.GFXZ._PSL] (Node 0xffffffe03aa8ffa8), AE_NOT_FOUND (20140828/psparse-552)
- ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20140828/psargs-393)
- ACPI Error: Method parse/execution failed [\\_TZ_.PSL_] (Node 0xffffffe03aa906f8), AE_NOT_FOUND (20140828/psparse-552)
- ACPI Error: Method parse/execution failed [\\_TZ_.BATZ._PSL] (Node 0xffffffe03aa90398), AE_NOT_FOUND (20140828/psparse-552)
- info: [drm] Initialized drm 1.1.0 20060810
- drm1.vgapci1.pci0.pcib0.acpi0.nexus0.root0
- drm1 [tentative] on vgapci1
- info: [drm] AGP at 0xa0000000 256MB
- iicbus0.iicbb0.intel_iicbb0.drm1.vgapci1.pci0.pcib0.acpi0.nexus0.root0
- iicbus0: <Philips I2C bus> [tentative]error: [drm:pid1146:i915_write32] *ERROR* Unknown unclaimed register before writing to c5100
- on iicbb0 addr 0xff
- iicbus0: <Philips I2C bus> [attached!] on iicbb0 addr 0xff
- iicbus2.iicbb1.intel_iicbb1.drm1.vgapci1.pci0.pcib0.acpi0.nexus0.root0
- iicbus2: <Philips I2C bus> [tentative] on iicbb1 addr 0xff
- iicbus2: <Philips I2C bus> [attached!] on iicbb1 addr 0xff
- iicbus4.iicbb2.intel_iicbb2.drm1.vgapci1.pci0.pcib0.acpi0.nexus0.root0
- iicbus4: <Philips I2C bus> [tentative] on iicbb2 addr 0xff
- iicbus4: <Philips I2C bus> [attached!] on iicbb2 addr 0xff
- iicbus6.iicbb3.intel_iicbb3.drm1.vgapci1.pci0.pcib0.acpi0.nexus0.root0
- iicbus6: <Philips I2C bus> [tentative] on iicbb3 addr 0xff
- iicbus6: <Philips I2C bus> [attached!] on iicbb3 addr 0xff
- iicbus8.iicbb4.intel_iicbb4.drm1.vgapci1.pci0.pcib0.acpi0.nexus0.root0
- iicbus8: <Philips I2C bus> [tentative] on iicbb4 addr 0xff
- iicbus8: <Philips I2C bus> [attached!] on iicbb4 addr 0xff
- iicbus10.iicbb5.intel_iicbb5.drm1.vgapci1.pci0.pcib0.acpi0.nexus0.root0
- iicbus10: <Philips I2C bus> [tentative] on iicbb5 addr 0xff
- iicbus10: <Philips I2C bus> [attached!] on iicbb5 addr 0xff
- info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- info: [drm] Driver supports precise vblank timestamp query.
- drm1: taking over the fictitious range 0xa0000000-0xb0000000
- info: [drm] Initialized i915 1.6.0 20080730
- drm1 [attached!] on vgapci1
- error: [drm:pid-1:i915_write32] *ERROR* Unknown unclaimed register before writing to 4400c
- info: [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
- error: [drm:pid-1:i915_write32] *ERROR* Unknown unclaimed register before writing to 4400c
- error: [drm:pid-1:i915_write32] *ERROR* Unknown unclaimed register before writing to 44024
- error: [drm:pid-1:i915_write32] *ERROR* Unknown unclaimed register before writing to 4400c
- error: [drm:pid-1:i915_write32] *ERROR* Unknown unclaimed register before writing to 4400c
- error: [drm:pid-1:i915_write32] *ERROR* Unknown unclaimed register before writing to 4400c
- error: [drm:pid-1:i915_write32] *ERROR* Unknown unclaimed register before writing to 4400c
- error: [drm:pid1146:intel_dp_set_link_train] *ERROR* Timed out waiting for DP idle patterns
- error: [drm:pid1146:i915_write32] *ERROR* Unknown unclaimed register before writing to 64040
- error: [drm:pid1146:i915_write32] *ERROR* Unknown unclaimed register before writing to 220a8
- error: [drm:pid-1:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement