Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Copyright (c) 1992-2012 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:46:30 UTC 2012
- root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
- CPU: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (1995.51-MHz K8-class CPU)
- Origin = "GenuineIntel" Id = 0x206a7 Family = 6 Model = 2a Stepping = 7
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x15bae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,AVX>
- AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
- AMD Features2=0x1<LAHF>
- TSC: P-state invariant, performance statistics
- real memory = 8589934592 (8192 MB)
- avail memory = 8198750208 (7818 MB)
- Event timer "LAPIC" quality 600
- ACPI APIC Table: <MIDERN MIDERN>
- FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
- FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 1
- cpu2 (AP): APIC ID: 2
- cpu3 (AP): APIC ID: 3
- cpu4 (AP): APIC ID: 4
- cpu5 (AP): APIC ID: 5
- cpu6 (AP): APIC ID: 6
- cpu7 (AP): APIC ID: 7
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- kbd1 at kbdmux0
- acpi0: <MIDERN MIDERN> on motherboard
- acpi0: Power Button (fixed)
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- cpu2: <ACPI CPU> on acpi0
- cpu3: <ACPI CPU> on acpi0
- cpu4: <ACPI CPU> on acpi0
- cpu5: <ACPI CPU> on acpi0
- cpu6: <ACPI CPU> on acpi0
- cpu7: <ACPI CPU> on acpi0
- acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf4000000-0xf5ffffff,0xe8000000-0xefffffff,0xf0000000-0xf3ffffff irq 16 at device 0.0 on pci1
- nvidia0: <GeForce GTX 560M> on vgapci0
- vgapci0: child nvidia0 requested pci_enable_io
- vgapci0: child nvidia0 requested pci_enable_io
- hdac0: <NVidia (Unknown) High Definition Audio Controller> mem 0xf6080000-0xf6083fff irq 17 at device 0.1 on pci1
- pci0: <simple comms> at device 22.0 (no driver attached)
- ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf6508000-0xf65083ff irq 16 at device 26.0 on pci0
- usbus0: EHCI version 1.0
- usbus0: <EHCI (generic) USB 2.0 controller> on ehci0
- hdac1: <Intel Cougar Point High Definition Audio Controller> mem 0xf6500000-0xf6503fff irq 22 at device 27.0 on pci0
- pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
- pci2: <ACPI PCI bus> on pcib2
- xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf6400000-0xf6401fff irq 16 at device 0.0 on pci2
- xhci0: 32 byte context size.
- usbus1 on xhci0
- pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
- pci3: <ACPI PCI bus> on pcib3
- jme0: <JMicron Inc, JMC25x Gigabit Ethernet> port 0xd100-0xd17f,0xd000-0xd0ff mem 0xf6320000-0xf6323fff,0xf6310000-0xf631ffff irq 19 at device 0.0 on pci3
- jme0: Using 1 MSIX messages.
- miibus0: <MII bus> on jme0
- jmphy0: <JMP211 10/100/1000 media interface> PHY 1 on miibus0
- jmphy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
- jme0: Ethernet address: 00:90:f5:bd:14:11
- pci3: <base peripheral> at device 0.1 (no driver attached)
- pci3: <base peripheral, SD host controller> at device 0.2 (no driver attached)
- pci3: <base peripheral> at device 0.3 (no driver attached)
- pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
- pci4: <ACPI PCI bus> on pcib4
- iwn0: <Intel(R) Ultimate N WiFi Link 5300> mem 0xf6200000-0xf6201fff irq 18 at device 0.0 on pci4
- pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
- pci5: <ACPI PCI bus> on pcib5
- fwohci0: <1394 Open Host Controller Interface> mem 0xf6103000-0xf61037ff,0xf6102000-0xf610207f,0xf6101000-0xf610107f,0xf6100000-0xf610007f irq 19 at device 0.0 on pci5
- fwohci0: OHCI version 1.10 (ROM=0)
- fwohci0: No. of Isochronous channels is 4.
- fwohci0: EUI64 ea:f4:14:bd:f5:90:00:58
- fwohci0: Phy 1394a available S400, 2 ports.
- fwohci0: fwphy_rddata:: 0x5 loop=100, retry=100
- fwohci0: fwphy_rddata:: 0x2 loop=100, retry=100
- fwohci0: Link S400, max_rec 2048 bytes.
- firewire0: <IEEE1394(FireWire) bus> on fwohci0
- fwe0: <Ethernet over FireWire> on firewire0
- if_fwe0: Fake Ethernet address: ea:f4:14:90:00:58
- fwe0: Ethernet address: ea:f4:14:90:00:58
- fwip0: <IP over FireWire> on firewire0
- fwip0: Firewire address: ea:f4:14:bd:f5:90:00:58 @ 0xfffe00000000, S400, maxrec 2048
- dcons_crom0: <dcons configuration ROM> on firewire0
- dcons_crom0: bus_addr 0x630c000
- fwohci0: Initiate bus reset
- fwohci0: fwphy_rddata:: 0x1 loop=100, retry=100
- fwohci0: fwphy_rddata:: 0x1 loop=100, retry=100
- ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf6507000-0xf65073ff irq 23 at device 29.0 on pci0
- usbus2: EHCI version 1.0
- usbus2: <EHCI (generic) USB 2.0 controller> on ehci1
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf6506000-0xf65067ff irq 19 at device 31.2 on pci0
- ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
- ahcich0: <AHCI channel> at channel 0 on ahci0
- ahcich1: <AHCI channel> at channel 2 on ahci0
- ahcich2: <AHCI channel> at channel 3 on ahci0
- pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
- acpi_acad0: <AC Adapter> on acpi0
- battery0: <ACPI Control Method Battery> on acpi0
- acpi_lid0: <Control Method Lid Switch> on acpi0
- acpi_button0: <Sleep Button> on acpi0
- acpi_button1: <Power Button> on acpi0
- acpi_tz0: <Thermal Zone> on acpi0
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Event timer "HPET" frequency 14318180 Hz quality 550
- atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
- atrtc0: Warning: Couldn't map I/O.
- Event timer "RTC" frequency 32768 Hz quality 0
- attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- psm0: <PS/2 Mouse> irq 12 on atkbdc0
- psm0: [GIANT-LOCKED]
- psm0: model Generic PS/2 mouse, device ID 0
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- ppc0: cannot reserve I/O port range
- est0: <Enhanced SpeedStep Frequency Control> on cpu0
- p4tcc0: <CPU Frequency Thermal Control> on cpu0
- est1: <Enhanced SpeedStep Frequency Control> on cpu1
- p4tcc1: <CPU Frequency Thermal Control> on cpu1
- est2: <Enhanced SpeedStep Frequency Control> on cpu2
- p4tcc2: <CPU Frequency Thermal Control> on cpu2
- est3: <Enhanced SpeedStep Frequency Control> on cpu3
- p4tcc3: <CPU Frequency Thermal Control> on cpu3
- est4: <Enhanced SpeedStep Frequency Control> on cpu4
- p4tcc4: <CPU Frequency Thermal Control> on cpu4
- est5: <Enhanced SpeedStep Frequency Control> on cpu5
- p4tcc5: <CPU Frequency Thermal Control> on cpu5
- est6: <Enhanced SpeedStep Frequency Control> on cpu6
- p4tcc6: <CPU Frequency Thermal Control> on cpu6
- est7: <Enhanced SpeedStep Frequency Control> on cpu7
- p4tcc7: <CPU Frequency Thermal Control> on cpu7
- Timecounters tick every 1.000 msec
- hdac0: HDA Codec #0: NVidia (Unknown)
- hdac0: HDA Codec #1: NVidia (Unknown)
- hdac0: HDA Codec #2: NVidia (Unknown)
- hdac0: HDA Codec #3: NVidia (Unknown)
- pcm0: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 0 nid 1 on hdac0
- pcm1: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 1 nid 1 on hdac0
- pcm2: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 2 nid 1 on hdac0
- pcm3: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 3 nid 1 on hdac0
- hdac1: HDA Codec #0: Realtek ALC892
- pcm4: <HDA Realtek ALC892 PCM #0 Analog> at cad 0 nid 1 on hdac1
- pcm5: <HDA Realtek ALC892 PCM #1 Digital> at cad 0 nid 1 on hdac1
- usbus0: 480Mbps High Speed USB v2.0
- usbus1: 5.0Gbps Super Speed USB v3.0
- usbus2: 480Mbps High Speed USB v2.0
- ugen0.1: <Intel> at usbus0
- uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
- ugen1.1: <0x1033> at usbus1
- uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
- ugen2.1: <Intel> at usbus2
- uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
- ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
- ada0: <TOSHIBA MK6032GSX AS311G> ATA-6 SATA 1.x device
- ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
- ada0: Command Queueing enabled
- ada0: 57137MB (117017460 512 byte sectors: 16H 63S/T 16383C)
- ada0: Previously was known as ad4
- ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
- ada1: <WDC WD5000BEVT-35A0RT0 01.01A01> ATA-8 SATA 2.x device
- ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada1: Command Queueing enabled
- ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
- ada1: Previously was known as ad6
- SMP: AP CPU #1 Launched!
- SMP: AP CPU #6 Launched!
- SMP: AP CPU #2 Launched!
- SMP: AP CPU #7 Launched!
- SMP: AP CPU #5 Launched!
- SMP: AP CPU #4 Launched!
- SMP: AP CPU #3 Launched!
- uhub1: 4 ports with 4 removable, self powered
- uhub0: 2 ports with 2 removable, self powered
- uhub2: 2 ports with 2 removable, self powered
- Root mount waiting for: usbus2 usbus0
- ugen0.2: <vendor 0x8087> at usbus0
- uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
- ugen2.2: <vendor 0x8087> at usbus2
- uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
- Root mount waiting for: usbus2 usbus0
- uhub3: 6 ports with 6 removable, self powered
- uhub4: 6 ports with 6 removable, self powered
- ugen2.3: <TouchStrip> at usbus2
- Root mount waiting for: usbus2
- ugen2.4: <BisonCam, NB Pro> at usbus2
- Trying to mount root from ufs:/dev/ada0p2 [rw]...
- jme0: link state changed to UP
- jme0: link state changed to DOWN
- jme0: link state changed to UP
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement