ET4G-JBa1-last_kmsg-RandomReboot

mc2: cmd 55 command index error error

<3>[ 1116.662703] mmc2: cmd 55 command crc error

<3>[ 1116.663186] mmc2: cmd 55 command crc error

<3>[ 1116.663638] mmc2: cmd 55 command index error error

<3>[ 1116.663755] mmc2: cmd 55 command crc error

<3>[ 1116.664185] mmc2: cmd 55 command index error error

<3>[ 1116.664300] mmc2: cmd 55 command crc error

<3>[ 1116.664826] mmc2: cmd 1 command end bit error

<3>[ 1116.690690] mmc2: cmd 52 command crc error

<3>[ 1116.691133] mmc2: cmd 52 command index error error

<3>[ 1116.691259] mmc2: cmd 52 command crc error

<3>[ 1116.695154] mmc2: cmd 8 command index error error

<3>[ 1116.695346] mmc2: cmd 8 command crc error

<3>[ 1116.695824] mmc2: cmd 5 command end bit error

<3>[ 1116.696231] mmc2: cmd 5 command end bit error

<3>[ 1116.696633] mmc2: cmd 5 command end bit error

<3>[ 1116.697097] mmc2: cmd 5 command end bit error

<3>[ 1116.697575] mmc2: cmd 55 command index error error

<3>[ 1116.697693] mmc2: cmd 55 command crc error

<3>[ 1116.698124] mmc2: cmd 55 command index error error

<3>[ 1116.698240] mmc2: cmd 55 command crc error

<3>[ 1116.698670] mmc2: cmd 55 command index error error

<3>[ 1116.698787] mmc2: cmd 55 command crc error

<3>[ 1116.699213] mmc2: cmd 55 command index error error

<3>[ 1116.699329] mmc2: cmd 55 command crc error

<3>[ 1116.699863] mmc2: cmd 1 command end bit error

<6>[ 1120.696284] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1120.696418] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1120.697410] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=824

<6>[ 1120.697928] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1120.698168] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1120.698347] sec-battery sec-battery: soc(87), vfocv(4050), vcell(4011), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1120.850891] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1122.477086] lcd panel: id=0 brightness=99, bl=3, candela=90

<6>[ 1122.632397] lcd panel: id=0 brightness=89, bl=2, candela=70

<6>[ 1122.908572] lcd panel: id=0 brightness=69, bl=1, candela=40

<6>[ 1123.469333] lcd panel: id=0 brightness=29, bl=0, candela=30

<3>[ 1126.650964] [TSP] Dn[0]

<6>[ 1126.672399] lcd panel: id=0 brightness=30, bl=1, candela=40

<3>[ 1126.753203] [TSP] Up[0]

<6>[ 1127.226960] lcd panel: id=0 brightness=70, bl=2, candela=70

<3>[ 1127.394142] [TSP] Dn[0]

<6>[ 1127.492151] lcd panel: id=0 brightness=91, bl=3, candela=90

<3>[ 1127.557899] [TSP] Up[0]

<6>[ 1127.617902] lcd panel: id=0 brightness=100, bl=4, candela=100

<3>[ 1127.658986] Wimax power ON

<3>[ 1127.726262] RESET

<6>[ 1127.753319] audss_clk_enable:ON : CLKSRC[0x1], CLKGATE[0x1c7]

<6>[ 1127.755568] G:P:DmaAddr=@61d60000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000

<7>[ 1127.757902] i2s_txctrl:Turn on

<4>[ 1127.980411] ---------test logs pdev : c08294a8 s3c_device_hsmmc3 c08294a8

<4>[ 1127.980555] ---------test logs notify_func : c0441cc4

<6>[ 1127.980667] mmc2: card inserted.

<6>[ 1128.211741] mmc2: cmd 52 command timeout error

<6>[ 1128.212336] mmc2: cmd 52 command timeout error

<6>[ 1128.217741] mmc2: cmd 8 command timeout error

<4>[ 1128.219215] mmc2: card claims to support voltages below the defined range. These will be ignored.

<6>[ 1128.274011] mmc2: new high speed SDIO card at address 0001

<3>[ 1128.284843] SDIO MODE

<6>[ 1130.721150] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1130.721281] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1130.722263] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=822

<6>[ 1130.722719] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1130.722958] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1130.723135] sec-battery sec-battery: soc(87), vfocv(4050), vcell(4036), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1130.803972] wake enabled for irq 361

<7>[ 1130.844117] i2s_txctrl: Turn Off - spr is no active

<6>[ 1130.844684] audss_clk_enable:OFF: CLKSRC[0x1], CLKGATE[0x1c3]

<6>[ 1130.892298] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1131.806051] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1131.806190] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1132.846520] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1132.846660] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1132.848618] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1132.848751] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1132.850733] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1132.850865] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1132.853020] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1132.853152] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1132.856604] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1132.856737] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1132.858814] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1132.858947] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1132.861081] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1132.861214] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1132.864678] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1132.864812] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1132.866980] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1132.867112] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1132.869192] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1132.869325] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1132.871434] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1132.871566] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1132.879161] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1132.879295] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1132.925660] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1132.925814] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1138.141833] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(0)

<7>[ 1138.141982] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1139.354607] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1139.354748] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1140.741055] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1140.741200] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1140.742198] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=822

<6>[ 1140.742661] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1140.742923] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1140.743103] sec-battery sec-battery: soc(87), vfocv(4050), vcell(4005), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1140.950935] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1144.574068] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(0)

<7>[ 1144.574280] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1144.790279] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1144.790332] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1145.113678] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(0)

<7>[ 1145.113832] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1150.462239] lcd panel: id=0 brightness=99, bl=3, candela=90

<6>[ 1150.608679] lcd panel: id=0 brightness=89, bl=2, candela=70

<6>[ 1150.761047] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1150.761153] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1150.762077] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=819

<6>[ 1150.762782] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1150.762976] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1150.763116] sec-battery sec-battery: soc(87), vfocv(4048), vcell(4002), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1150.911119] lcd panel: id=0 brightness=68, bl=1, candela=40

<6>[ 1150.965551] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1151.461435] lcd panel: id=0 brightness=29, bl=0, candela=30

<6>[ 1157.408689] request_suspend_state: sleep (0->3) at 1157408446998 (2012-08-03 16:19:49.378139491 UTC)

<7>[ 1157.409006] [TouchKey] sec_touchkey_early_suspend

<6>[ 1158.021327] lcd panel: +ld9040_early_suspend

<6>[ 1158.021438] lcd panel: ld9040_power_off

<6>[ 1158.341345] lcd panel: -ld9040_early_suspend

<6>[ 1158.341464] +s3cfb_early_suspend

<7>[ 1158.342318] s3cfb - disable power domain

<6>[ 1158.342425] -s3cfb_early_suspend

<6>[ 1158.455462] suspend: enter suspend

<6>[ 1158.455496] suspend: enter suspend, (2012-08-03 16:19:50.000000000 UTC)

<6>[ 1158.455539] PM: Syncing filesystems ... done.

<6>[ 1158.469551] exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0

<4>[ 1158.469590] Freezing user space processes ... (elapsed 0.02 seconds) done.

<4>[ 1158.490387] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

<4>[ 1158.505360] Suspending console(s) (use no_console_suspend to debug)

<6>[ 1158.531538] max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2012-08-03 16:19:53

<6>[ 1159.105257] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 0

<3>[ 1159.115220] IDPRAM/Err : <dpram_send_mbx_BA_cmd:1295> send cmd intr, retry cnt = 1

<6>[ 1159.115262] IDPRAM : <dpram_send_mbx_BA_cmd:1298> Current GPIO_PDA_ACTIVE =  1

<6>[ 1159.115303] IDPRAM : <dpram_send_mbx_BA_cmd:1300> GPIO_PDA_ACTIVE =  1

<3>[ 1159.125218] IDPRAM/Err : <dpram_send_mbx_BA_cmd:1295> send cmd intr, retry cnt = 2

<6>[ 1159.125260] IDPRAM : <dpram_send_mbx_BA_cmd:1298> Current GPIO_PDA_ACTIVE =  1

<6>[ 1159.125300] IDPRAM : <dpram_send_mbx_BA_cmd:1300> GPIO_PDA_ACTIVE =  1

<3>[ 1159.135218] IDPRAM/Err : <dpram_send_mbx_BA_cmd:1295> send cmd intr, retry cnt = 3

<6>[ 1159.135259] IDPRAM : <dpram_send_mbx_BA_cmd:1298> Current GPIO_PDA_ACTIVE =  1

<6>[ 1159.135299] IDPRAM : <dpram_send_mbx_BA_cmd:1300> GPIO_PDA_ACTIVE =  1

<3>[ 1159.145218] IDPRAM/Err : <dpram_send_mbx_BA_cmd:1295> send cmd intr, retry cnt = 4

<6>[ 1159.145260] IDPRAM : <dpram_send_mbx_BA_cmd:1298> Current GPIO_PDA_ACTIVE =  1

<6>[ 1159.145299] IDPRAM : <dpram_send_mbx_BA_cmd:1300> GPIO_PDA_ACTIVE =  1

<3>[ 1159.155218] IDPRAM/Err : <dpram_send_mbx_BA_cmd:1295> send cmd intr, retry cnt = 5

<6>[ 1159.155260] IDPRAM : <dpram_send_mbx_BA_cmd:1298> Current GPIO_PDA_ACTIVE =  1

<6>[ 1159.155299] IDPRAM : <dpram_send_mbx_BA_cmd:1300> GPIO_PDA_ACTIVE =  1

<6>[ 1159.655362] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 1

<3>[ 1159.665234] IDPRAM/Err : <dpram_send_mbx_BA_cmd:1295> send cmd intr, retry cnt = 1

<6>[ 1159.665274] IDPRAM : <dpram_send_mbx_BA_cmd:1298> Current GPIO_PDA_ACTIVE =  1

<6>[ 1159.665317] IDPRAM : <dpram_send_mbx_BA_cmd:1300> GPIO_PDA_ACTIVE =  1

<3>[ 1159.675212] IDPRAM/Err : <dpram_send_mbx_BA_cmd:1295> send cmd intr, retry cnt = 2

<6>[ 1159.675252] IDPRAM : <dpram_send_mbx_BA_cmd:1298> Current GPIO_PDA_ACTIVE =  1

<6>[ 1159.675294] IDPRAM : <dpram_send_mbx_BA_cmd:1300> GPIO_PDA_ACTIVE =  1

<3>[ 1159.685207] IDPRAM/Err : <dpram_send_mbx_BA_cmd:1295> send cmd intr, retry cnt = 3

<6>[ 1159.685247] IDPRAM : <dpram_send_mbx_BA_cmd:1298> Current GPIO_PDA_ACTIVE =  1

<6>[ 1159.685290] IDPRAM : <dpram_send_mbx_BA_cmd:1300> GPIO_PDA_ACTIVE =  1

<3>[ 1159.695223] IDPRAM/Err : <dpram_send_mbx_BA_cmd:1295> send cmd intr, retry cnt = 4

<6>[ 1159.695263] IDPRAM : <dpram_send_mbx_BA_cmd:1298> Current GPIO_PDA_ACTIVE =  1

<6>[ 1159.695304] IDPRAM : <dpram_send_mbx_BA_cmd:1300> GPIO_PDA_ACTIVE =  1

<3>[ 1159.705221] IDPRAM/Err : <dpram_send_mbx_BA_cmd:1295> send cmd intr, retry cnt = 5

<6>[ 1159.705261] IDPRAM : <dpram_send_mbx_BA_cmd:1298> Current GPIO_PDA_ACTIVE =  1

<6>[ 1159.705303] IDPRAM : <dpram_send_mbx_BA_cmd:1300> GPIO_PDA_ACTIVE =  1

<6>[ 1160.205250] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 2

<3>[ 1160.205284] IDPRAM/Err : <dpram_suspend:3511> T-I-M-E-O-U-T !!! (intr = 0x0000)

<3>[ 1160.205325] IDPRAM/Err : <dpram_suspend:3516> phone_sync: [0] retry Phone reset and on

<6>[ 1160.205371] IDPRAM : dpram_phone_reset() ...

<6>[ 1160.205394] IDPRAM : dpram_init_magic_num() ...

<6>[ 1160.205423] IDPRAM : <dpram_init_magic_num:1215> Read_MagicNum : 0x4d4e

<6>[ 1160.310249] IDPRAM : dpram_phone_power_on() ...

<6>[ 1160.310279] IDPRAM : dpram_init_magic_num() ...

<6>[ 1160.310309] IDPRAM : <dpram_init_magic_num:1215> Read_MagicNum : 0x4d4e

<6>[ 1160.365220] IDPRAM : <phone_active_work_func:2407> PHONE_ACTIVE level: LOW , phone_sync: 0

<6>[ 1160.723048] max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2

<6>[ 1160.723326] max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)

<6>[ 1160.723543] max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0

<4>[ 1160.723581] max8997 5-0066: Unused interrupt source: 0x0

<6>[ 1160.745580] sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=360

<6>[ 1161.228518] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1161.430252] IDPRAM : <dpram_phone_power_on:1460> Read_MagicNum : 0x4d4e

<3>[ 1161.430307] pm_op(): platform_pm_suspend+0x0/0x6c returns -1

<3>[ 1161.430344] PM: Device dpram-device failed to suspend: error -1

<3>[ 1161.430377] PM: Some devices failed to suspend

<3>[ 1161.485591] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1161.490696] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1161.490784] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<1>[ 1161.490853] _cy_as_device: cy_as_event_misc_awake event callback triggered

<3>[ 1161.500221] [cyasdevice.c] cyasdevice_leave_standby end mode  count=8

<3>[ 1161.515905] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1161.515987] cyasblkdev_stop_sdcard : cy_as_storage_stop is called - found

<3>[ 1161.516157] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1161.949400] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1161.949472] cyasblkdev_start_sdcard : cy_as_storage_start is called

<3>[ 1161.949649] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1161.949718] cyasblkdev_start_sdcard : cy_as_storage_query_media is called - media count = 1

<3>[ 1161.949918] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1161.949996] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1161.950063] cyasblkdev_start_sdcard : cy_as_storage_query_device is called - found

<3>[ 1161.950118] [cyasdevice.c] cy_wq_function:					leave standby

<3>[ 1161.950149] ++++++++++++  [cyasdevice.c] cy_wq_function: SD card is inserted.

<3>[ 1161.950352] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1161.950429] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1161.950502] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1161.955244] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1161.955315] cyasblkdev_check_sdcard : serial num = 0x7b 0xc4 0x42 0x95

<6>[ 1161.955653] PM: resume of devices complete after 525.233 msecs

<4>[ 1161.956745] Restarting tasks ...

<6>[ 1161.957027] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1161.957062] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1161.957610] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=817

<6>[ 1161.957804] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1161.957869] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1161.957918] sec-battery sec-battery: soc(87), vfocv(4048), vcell(4025), temp(34), charging(2), health(1), chg_adc(0)

<4>[ 1161.963767] usb usb1: root hub lost power or was reset

<4>[ 1161.975865] done.

<6>[ 1161.976523] exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0

<6>[ 1161.976572] suspend: exit suspend, ret = -1 (2012-08-03 16:19:53.946097702 UTC)

<3>[ 1162.090419] hub 1-0:1.0: activate --> -22

<6>[ 1162.115945] IDPRAM : <cmd_phone_start_handler:2233> Received CMD_PHONE_START!!! 0

<6>[ 1162.116044] IDPRAM : cmd_phone_start_handler() ...

<6>[ 1162.116116] IDPRAM : <cmd_phone_start_handler:2238> Current GPIO_PDA_ACTIVE =  1

<6>[ 1162.116211] IDPRAM : dpram_init_and_report() ...

<6>[ 1162.121341] IDPRAM : <dpram_init_and_report:1371> Sent CMD_INIT_END(0x01C2) to Phone!!!

<6>[ 1162.121446] IDPRAM : <cmd_phone_start_handler:2243> GPIO_PDA_ACTIVE =  1

<7>[ 1162.304477] SDMMC [2] working

<7>[ 1162.322143] SDMMC [2] working

<7>[ 1162.339775] SDMMC [2] working

<7>[ 1162.357257] SDMMC [2] working

<7>[ 1162.375944] SDMMC [2] working

<7>[ 1162.391576] SDMMC [2] working

<7>[ 1162.409204] SDMMC [2] working

<7>[ 1162.426841] SDMMC [2] working

<3>[ 1162.955491] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1162.955686] [cyasdevice.c] cyasdevice_enter_standby  end mode

<7>[ 1163.125458] SDMMC [2] working

<7>[ 1163.177874] SDMMC [2] working

<7>[ 1163.202792] SDMMC [2] working

<7>[ 1163.233169] SDMMC [2] working

<7>[ 1163.251679] SDMMC [2] working

<7>[ 1163.286441] SDMMC [2] working

<7>[ 1163.304024] SDMMC [2] working

<7>[ 1163.323124] SDMMC [2] working

<7>[ 1163.340803] SDMMC [2] working

<7>[ 1163.358356] SDMMC [2] working

<7>[ 1163.378354] SDMMC [2] working

<7>[ 1163.394584] SDMMC [2] working

<7>[ 1163.412761] SDMMC [2] working

<7>[ 1163.431899] SDMMC [2] working

<7>[ 1163.450613] SDMMC [2] working

<7>[ 1163.466844] SDMMC [2] working

<7>[ 1163.484137] SDMMC [2] working

<6>[ 1163.583281] suspend: enter suspend

<6>[ 1163.583380] suspend: enter suspend, (2012-08-03 16:19:55.3227688132 UTC)

<6>[ 1163.583479] PM: Syncing filesystems ... done.

<6>[ 1163.639518] exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0

<4>[ 1163.639559] Freezing user space processes ...

<6>[ 1163.644023] active wake lock radio-interface

<4>[ 1163.644053]

<3>[ 1163.644067] Freezing of user space  aborted

<4>[ 1163.645080]

<4>[ 1163.645094] Restarting tasks ... done.

<6>[ 1163.647453] exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0

<6>[ 1163.647505] suspend: exit suspend, ret = -16 (2012-08-03 16:19:55.617030160 UTC)

<6>[ 1163.647554] active wake lock radio-interface

<6>[ 1163.647579] suspend: abort suspend

<7>[ 1164.029251] SDMMC [2] working

<7>[ 1164.049268] SDMMC [2] working

<7>[ 1164.067976] SDMMC [2] working

<7>[ 1164.102583] SDMMC [2] working

<7>[ 1164.120155] SDMMC [2] working

<7>[ 1164.137803] SDMMC [2] working

<7>[ 1164.156465] SDMMC [2] working

<7>[ 1164.191841] SDMMC [2] working

<7>[ 1164.209415] SDMMC [2] working

<7>[ 1164.226978] SDMMC [2] working

<7>[ 1164.245638] SDMMC [2] working

<7>[ 1164.258297] SDMMC [2] working

<7>[ 1164.294519] SDMMC [2] working

<7>[ 1164.312067] SDMMC [2] working

<7>[ 1164.329624] SDMMC [2] working

<7>[ 1164.347182] SDMMC [2] working

<7>[ 1164.364734] SDMMC [2] working

<7>[ 1164.382432] SDMMC [2] working

<7>[ 1164.399866] SDMMC [2] working

<7>[ 1164.418696] SDMMC [2] working

<7>[ 1164.436704] SDMMC [2] working

<7>[ 1164.454002] SDMMC [2] working

<7>[ 1164.467250] SDMMC [2] working

<7>[ 1164.503898] SDMMC [2] working

<7>[ 1164.522434] SDMMC [2] working

<7>[ 1164.559950] SDMMC [2] working

<7>[ 1164.592910] SDMMC [2] working

<7>[ 1164.610114] SDMMC [2] working

<7>[ 1164.701859] SDMMC [2] working

<7>[ 1165.330228] SDMMC [2] working

<7>[ 1165.393119] SDMMC [2] working

<7>[ 1165.450326] SDMMC [2] working

<7>[ 1165.493378] SDMMC [2] working

<7>[ 1165.594501] SDMMC [2] working

<7>[ 1165.672271] SDMMC [2] working

<7>[ 1165.693757] SDMMC [2] working

<7>[ 1165.838094] SDMMC [2] working

<7>[ 1165.894493] SDMMC [2] working

<7>[ 1165.951194] SDMMC [2] working

<7>[ 1165.994704] SDMMC [2] working

<7>[ 1166.011764] SDMMC [2] working

<7>[ 1166.076545] SDMMC [2] working

<7>[ 1166.078050] SDMMC [2] working

<7>[ 1166.079014] SDMMC [2] working

<7>[ 1166.095215] SDMMC [2] working

<7>[ 1166.100472] SDMMC [2] working

<7>[ 1166.126910] SDMMC [2] working

<7>[ 1166.202866] SDMMC [2] working

<7>[ 1166.220822] SDMMC [2] working

<7>[ 1166.450364] SDMMC [2] working

<7>[ 1166.599595] SDMMC [2] working

<7>[ 1166.618404] SDMMC [2] working

<7>[ 1166.635056] SDMMC [2] working

<7>[ 1166.699875] SDMMC [2] working

<7>[ 1166.800141] SDMMC [2] working

<7>[ 1166.825644] SDMMC [2] working

<7>[ 1166.842175] SDMMC [2] working

<7>[ 1166.900419] SDMMC [2] working

<7>[ 1166.951230] SDMMC [2] working

<7>[ 1167.000989] SDMMC [2] working

<7>[ 1167.033558] SDMMC [2] working

<7>[ 1167.051386] SDMMC [2] working

<7>[ 1167.077105] SDMMC [2] working

<7>[ 1167.101496] SDMMC [2] working

<7>[ 1167.111047] SDMMC [2] working

<7>[ 1167.277905] SDMMC [2] working

<7>[ 1167.301909] SDMMC [2] working

<7>[ 1167.320398] SDMMC [2] working

<7>[ 1167.402204] SDMMC [2] working

<7>[ 1167.461707] SDMMC [2] working

<7>[ 1167.502714] SDMMC [2] working

<7>[ 1167.603203] SDMMC [2] working

<7>[ 1167.810637] SDMMC [2] working

<7>[ 1167.860374] SDMMC [2] working

<7>[ 1167.876947] SDMMC [2] working

<7>[ 1167.907255] SDMMC [2] working

<7>[ 1167.954017] SDMMC [2] working

<7>[ 1168.020691] SDMMC [2] working

<7>[ 1168.118192] SDMMC [2] working

<7>[ 1168.231497] SDMMC [2] working

<7>[ 1168.276774] SDMMC [2] working

<7>[ 1168.294118] SDMMC [2] working

<7>[ 1168.311219] SDMMC [2] working

<7>[ 1168.411720] SDMMC [2] working

<7>[ 1168.451176] SDMMC [2] working

<7>[ 1168.485619] SDMMC [2] working

<7>[ 1168.511955] SDMMC [2] working

<7>[ 1168.612258] SDMMC [2] working

<7>[ 1168.625916] SDMMC [2] working

<7>[ 1168.713723] SDMMC [2] working

<7>[ 1168.786577] SDMMC [2] working

<7>[ 1168.813266] SDMMC [2] working

<7>[ 1168.923326] SDMMC [2] working

<7>[ 1168.950928] SDMMC [2] working

<7>[ 1169.000597] SDMMC [2] working

<7>[ 1169.014005] SDMMC [2] working

<7>[ 1169.077980] SDMMC [2] working

<7>[ 1169.114833] SDMMC [2] working

<7>[ 1169.196036] SDMMC [2] working

<7>[ 1169.214838] SDMMC [2] working

<7>[ 1169.276091] SDMMC [2] working

<7>[ 1169.315361] SDMMC [2] working

<7>[ 1169.330370] SDMMC [2] working

<7>[ 1169.347612] SDMMC [2] working

<7>[ 1169.380931] SDMMC [2] working

<7>[ 1169.415885] SDMMC [2] working

<7>[ 1169.450898] SDMMC [2] working

<7>[ 1169.516370] SDMMC [2] working

<7>[ 1169.538881] SDMMC [2] working

<7>[ 1169.556316] SDMMC [2] working

<7>[ 1169.616871] SDMMC [2] working

<7>[ 1169.717367] SDMMC [2] working

<7>[ 1169.735635] SDMMC [2] working

<7>[ 1169.747675] SDMMC [2] working

<7>[ 1169.764907] SDMMC [2] working

<7>[ 1169.817873] SDMMC [2] working

<7>[ 1169.918377] SDMMC [2] working

<7>[ 1169.956065] SDMMC [2] working

<7>[ 1169.973300] SDMMC [2] working

<7>[ 1170.018870] SDMMC [2] working

<7>[ 1170.078529] SDMMC [2] working

<7>[ 1170.127822] SDMMC [2] working

<7>[ 1170.164564] SDMMC [2] working

<7>[ 1170.181981] SDMMC [2] working

<7>[ 1170.219872] SDMMC [2] working

<7>[ 1170.320371] SDMMC [2] working

<7>[ 1170.373315] SDMMC [2] working

<7>[ 1170.390992] SDMMC [2] working

<7>[ 1170.420884] SDMMC [2] working

<7>[ 1170.450867] SDMMC [2] working

<7>[ 1170.521374] SDMMC [2] working

<7>[ 1170.582332] SDMMC [2] working

<7>[ 1170.599542] SDMMC [2] working

<7>[ 1170.621871] SDMMC [2] working

<7>[ 1170.722369] SDMMC [2] working

<7>[ 1170.791203] SDMMC [2] working

<7>[ 1170.808441] SDMMC [2] working

<7>[ 1170.822877] SDMMC [2] working

<7>[ 1170.923384] SDMMC [2] working

<6>[ 1170.951631] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1170.951758] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1170.952748] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=818

<6>[ 1170.953659] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1170.953901] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1170.954078] sec-battery sec-battery: soc(87), vfocv(4048), vcell(4025), temp(34), charging(2), health(1), chg_adc(0)

<7>[ 1170.980363] SDMMC [2] working

<7>[ 1170.999008] SDMMC [2] working

<7>[ 1171.025457] SDMMC [2] working

<7>[ 1171.079086] SDMMC [2] working

<7>[ 1171.124716] SDMMC [2] working

<7>[ 1171.206940] SDMMC [2] working

<7>[ 1171.224944] SDMMC [2] working

<7>[ 1171.325436] SDMMC [2] working

<6>[ 1171.421158] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<7>[ 1171.425670] SDMMC [2] working

<7>[ 1171.438353] SDMMC [2] working

<7>[ 1171.450892] SDMMC [2] working

<7>[ 1171.526173] SDMMC [2] working

<7>[ 1171.629411] SDMMC [2] working

<7>[ 1171.646654] SDMMC [2] working

<7>[ 1171.727152] SDMMC [2] working

<7>[ 1171.837720] SDMMC [2] working

<7>[ 1171.854949] SDMMC [2] working

<7>[ 1171.928157] SDMMC [2] working

<7>[ 1171.951054] SDMMC [2] working

<7>[ 1172.028359] SDMMC [2] working

<7>[ 1172.046285] SDMMC [2] working

<7>[ 1172.063512] SDMMC [2] working

<7>[ 1172.079614] SDMMC [2] working

<7>[ 1172.128865] SDMMC [2] working

<7>[ 1172.229165] SDMMC [2] working

<7>[ 1172.254894] SDMMC [2] working

<7>[ 1172.280838] SDMMC [2] working

<7>[ 1172.335360] SDMMC [2] working

<7>[ 1172.370614] SDMMC [2] working

<7>[ 1172.429861] SDMMC [2] working

<7>[ 1172.451063] SDMMC [2] working

<7>[ 1172.463894] SDMMC [2] working

<7>[ 1172.481407] SDMMC [2] working

<7>[ 1172.530369] SDMMC [2] working

<7>[ 1172.630855] SDMMC [2] working

<7>[ 1172.671758] SDMMC [2] working

<7>[ 1172.688987] SDMMC [2] working

<7>[ 1172.731351] SDMMC [2] working

<7>[ 1172.831842] SDMMC [2] working

<7>[ 1172.880723] SDMMC [2] working

<7>[ 1172.897576] SDMMC [2] working

<7>[ 1172.932354] SDMMC [2] working

<7>[ 1172.950868] SDMMC [2] working

<6>[ 1173.003519] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1173.003660] [sec_bat_check_event_status] current batt_event_status = 0x40

<7>[ 1173.010489] SDMMC [2] working

<7>[ 1173.032875] SDMMC [2] working

<7>[ 1173.088771] SDMMC [2] working

<7>[ 1173.106793] SDMMC [2] working

<7>[ 1173.135006] SDMMC [2] working

<7>[ 1173.150645] SDMMC [2] working

<7>[ 1173.205944] SDMMC [2] working

<7>[ 1173.233593] SDMMC [2] working

<7>[ 1173.298043] SDMMC [2] working

<7>[ 1173.316730] SDMMC [2] working

<7>[ 1173.334109] SDMMC [2] working

<7>[ 1173.434613] SDMMC [2] working

<7>[ 1173.451063] SDMMC [2] working

<7>[ 1173.507113] SDMMC [2] working

<7>[ 1173.524394] SDMMC [2] working

<7>[ 1173.535106] SDMMC [2] working

<7>[ 1173.635596] SDMMC [2] working

<7>[ 1173.714728] SDMMC [2] working

<7>[ 1173.735824] SDMMC [2] working

<7>[ 1173.836318] SDMMC [2] working

<7>[ 1173.923288] SDMMC [2] working

<7>[ 1173.950570] SDMMC [2] working

<7>[ 1174.405249] SDMMC [2] working

<7>[ 1174.450310] SDMMC [2] working

<7>[ 1174.553129] SDMMC [2] working

<7>[ 1174.569639] SDMMC [2] working

<7>[ 1174.643284] SDMMC [2] working

<7>[ 1174.743526] SDMMC [2] working

<7>[ 1174.760139] SDMMC [2] working

<7>[ 1174.776560] SDMMC [2] working

<7>[ 1174.843776] SDMMC [2] working

<7>[ 1174.874217] SDMMC [2] working

<7>[ 1174.984911] SDMMC [2] working

<7>[ 1175.044859] SDMMC [2] working

<7>[ 1175.082337] SDMMC [2] working

<7>[ 1175.145364] SDMMC [2] working

<7>[ 1175.176311] SDMMC [2] working

<7>[ 1175.193763] SDMMC [2] working

<7>[ 1175.250390] SDMMC [2] working

<7>[ 1175.346038] SDMMC [2] working

<7>[ 1175.385130] SDMMC [2] working

<7>[ 1175.402639] SDMMC [2] working

<7>[ 1175.450820] SDMMC [2] working

<7>[ 1175.547034] SDMMC [2] working

<7>[ 1175.560101] SDMMC [2] working

<7>[ 1175.560652] SDMMC [2] working

<7>[ 1175.562716] SDMMC [2] working

<7>[ 1175.563249] SDMMC [2] working

<7>[ 1175.611570] SDMMC [2] working

<7>[ 1175.647542] SDMMC [2] working

<7>[ 1175.748035] SDMMC [2] working

<7>[ 1175.802916] SDMMC [2] working

<7>[ 1175.820152] SDMMC [2] working

<7>[ 1175.848537] SDMMC [2] working

<7>[ 1175.950749] SDMMC [2] working

<7>[ 1176.031324] SDMMC [0] working

<7>[ 1176.049274] SDMMC [2] working

<7>[ 1176.082884] SDMMC [2] working

<7>[ 1176.149775] SDMMC [2] working

<7>[ 1176.218788] SDMMC [2] working

<7>[ 1176.255383] SDMMC [2] working

<7>[ 1176.350496] SDMMC [2] working

<7>[ 1176.428114] SDMMC [2] working

<7>[ 1176.450702] SDMMC [2] working

<7>[ 1176.475771] SDMMC [2] working

<7>[ 1176.551182] SDMMC [2] working

<7>[ 1176.636245] SDMMC [2] working

<7>[ 1176.653204] SDMMC [2] working

<7>[ 1176.752170] SDMMC [2] working

<7>[ 1176.861480] SDMMC [2] working

<7>[ 1176.952631] SDMMC [2] working

<7>[ 1177.000590] SDMMC [2] working

<7>[ 1177.052850] SDMMC [2] working

<7>[ 1177.069025] SDMMC [2] working

<7>[ 1177.083416] SDMMC [2] working

<7>[ 1177.153145] SDMMC [2] working

<7>[ 1177.260467] SDMMC [2] working

<6>[ 1177.950322] cpu1 turning on!

<4>[ 1177.967387] CPU1: Booted secondary processor

<6>[ 1177.968278] cpu1 on

<6>[ 1177.970229] Switched to NOHz mode on CPU #1

<6>[ 1179.965885] cpu1 turnning off!

<4>[ 1179.968626] IRQ112 no longer affine to CPU1

<5>[ 1179.969960] CPU1: shutdown

<6>[ 1179.978059] cpu1 off!

<6>[ 1180.976678] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1180.976809] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1180.978068] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=819

<6>[ 1180.979584] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1180.979825] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1180.980002] sec-battery sec-battery: soc(87), vfocv(4048), vcell(4031), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1181.481042] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<7>[ 1181.885561] SDMMC [2] working

<7>[ 1182.187069] SDMMC [0] working

<7>[ 1182.501706] SDMMC [2] working

<7>[ 1182.565889] SDMMC [2] working

<7>[ 1182.608769] SDMMC [2] working

<7>[ 1182.609754] SDMMC [2] working

<7>[ 1182.610309] SDMMC [2] working

<7>[ 1182.610837] SDMMC [2] working

<7>[ 1182.613099] SDMMC [2] working

<7>[ 1183.369238] SDMMC [2] working

<7>[ 1183.569569] SDMMC [2] working

<7>[ 1184.875653] SDMMC [2] working

<7>[ 1186.013575] SDMMC [0] working

<6>[ 1186.486739] request_suspend_state: wakeup (3->0) at 1186486502512 (2012-08-03 16:20:18.817455262 UTC)

<3>[ 1186.733882] [TSP] ta_status is 0

<3>[ 1186.733902] [TSP] mxt224_ta_probe

<3>[ 1186.734695] [TSP] Calibration!!!!!!

<3>[ 1186.745240] [TSP] Calibration End!!!!!!

<3>[ 1186.765370] [TSP]TA_probe MXT224E T48 Byte2 is 66

<3>[ 1186.765962] [TSP] Calibration!!!!!!

<3>[ 1186.769980] [TSP] Calibration End!!!!!!

<3>[ 1186.771177] [TSP]TA_probe MXT224E T48 Byte2 is 98

<3>[ 1186.772405] [TSP] calibration success!!!

<6>[ 1186.772804] +s3cfb_late_resume

<7>[ 1186.772820] s3cfb - enable power domain

<6>[ 1186.772944] s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff

<7>[ 1186.772984] FIMD src sclk = 50000000

<6>[ 1186.773008] s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2

<6>[ 1186.773064] mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI

<6>[ 1186.773152] -s3cfb_late_resume

<6>[ 1186.773170] lcd panel: +ld9040_late_resume

<6>[ 1186.773190] lcd panel: ld9040_power_on

<3>[ 1186.773374] [TSP] Calibration!!!!!!

<3>[ 1186.784630] [TSP] Calibration End!!!!!!

<6>[ 1186.999959] lcd panel: id=0 brightness=21, bl=0, candela=30

<6>[ 1187.000017] lcd panel: -ld9040_late_resume

<6>[ 1187.000062] mdnie mdnie: +mdnie_late_resume

<6>[ 1187.000102] mdnie mdnie: -mdnie_late_resume

<7>[ 1187.000164] [TouchKey] sec_touchkey_late_resume

<6>[ 1187.000836] s5p_gpioint_set_type irq:389 is at GPL0(5)

<6>[ 1187.062163] lcd panel: id=0 brightness=30, bl=1, candela=40

<7>[ 1187.111089] [TouchKey] touchkey_autocalibration : data[0]=8 data[1]=e data[2]=8 data[3]=0

<7>[ 1187.216204] [Touchkey] autocal disabled, retry 0

<7>[ 1187.216927] [TouchKey] touchkey_autocalibration : data[0]=50 data[1]=e data[2]=8 data[3]=1

<7>[ 1187.321312] [Touchkey] autocal Enabled

<6>[ 1187.436547] lcd panel: id=0 brightness=70, bl=2, candela=70

<6>[ 1187.480290] cpu1 turning on!

<4>[ 1187.504272] CPU1: Booted secondary processor

<6>[ 1187.505235] Switched to NOHz mode on CPU #1

<6>[ 1187.508562] cpu1 on

<6>[ 1187.633033] lcd panel: id=0 brightness=91, bl=3, candela=90

<3>[ 1187.699492] [TSP] Dn[0]

<3>[ 1187.717949] [TSP] t: 4, a: 0

<6>[ 1187.724196] lcd panel: id=0 brightness=101, bl=4, candela=100

<6>[ 1187.725646] [VIB] vibrator_work: pwm_config duty=32935

<3>[ 1187.765781] [TSP] t: 4, a: 0

<3>[ 1187.782514] [TSP] t: 4, a: 0

<3>[ 1187.799443] [TSP] t: 3, a: 0

<3>[ 1187.816204] [TSP] t: 3, a: 0

<3>[ 1187.832952] [TSP] t: 3, a: 0

<3>[ 1187.849690] [TSP] t: 4, a: 0

<3>[ 1187.866468] [TSP] t: 2, a: 0

<3>[ 1187.883226] [TSP] t: 1, a: 0

<3>[ 1187.900079] [TSP] t: 1, a: 0

<3>[ 1187.913553] [TSP] Up[0]

<6>[ 1187.942361] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1189.505775] cpu1 turnning off!

<4>[ 1189.508001] IRQ112 no longer affine to CPU1

<5>[ 1189.509335] CPU1: shutdown

<6>[ 1189.514468] cpu1 off!

<6>[ 1191.001073] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1191.001203] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1191.002190] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=815

<6>[ 1191.002646] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1191.002885] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1191.003063] sec-battery sec-battery: soc(87), vfocv(4047), vcell(4011), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1191.407385] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1191.505407] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1193.378032] [VIB] vibrator_work: pwm_config duty=32935

<3>[ 1194.508536] [TSP] Dn[0]

<3>[ 1194.527086] [TSP] t: 0, a: 0

<3>[ 1194.527346] [TSP] calibration was not decided yet

<3>[ 1194.551019] [TSP] Up[0]

<3>[ 1194.608547] [TSP] Dn[0]

<3>[ 1194.627319] [TSP] t: 4, a: 0

<3>[ 1194.658246] [TSP] t: 3, a: 0

<3>[ 1194.676021] [TSP] t: 4, a: 0

<3>[ 1194.693822] [TSP] t: 4, a: 0

<3>[ 1194.711121] [TSP] t: 3, a: 0

<3>[ 1194.728371] [TSP] t: 4, a: 0

<3>[ 1194.745913] [TSP] t: 4, a: 0

<3>[ 1194.763396] [TSP] t: 4, a: 0

<3>[ 1194.783258] [TSP] t: 3, a: 0

<3>[ 1194.800087] [TSP] t: 4, a: 0

<3>[ 1194.816924] [TSP] t: 4, a: 0

<3>[ 1194.834221] [TSP] t: 3, a: 0

<3>[ 1194.851217] [TSP] t: 3, a: 0

<3>[ 1194.868072] [TSP] t: 0, a: 0

<3>[ 1194.868294] [TSP] calibration was not decided yet

<3>[ 1194.887439] [TSP] t: 0, a: 0

<3>[ 1194.887714] [TSP] calibration was not decided yet

<3>[ 1194.888467] [TSP] Up[0]

<6>[ 1195.010300] cpu1 turning on!

<4>[ 1195.030919] CPU1: Booted secondary processor

<6>[ 1195.031982] cpu1 on

<6>[ 1195.035229] Switched to NOHz mode on CPU #1

<6>[ 1196.227086] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1197.030641] cpu1 turnning off!

<4>[ 1197.033375] IRQ112 no longer affine to CPU1

<5>[ 1197.034538] CPU1: shutdown

<6>[ 1197.040115] cpu1 off!

<6>[ 1197.069532] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1197.535408] cpu1 turning on!

<4>[ 1197.547741] CPU1: Booted secondary processor

<6>[ 1197.548663] cpu1 on

<6>[ 1197.550211] Switched to NOHz mode on CPU #1

<6>[ 1199.545503] cpu1 turnning off!

<4>[ 1199.547294] IRQ112 no longer affine to CPU1

<5>[ 1199.548247] CPU1: shutdown

<6>[ 1199.552538] cpu1 off!

<6>[ 1200.050296] cpu1 turning on!

<4>[ 1200.069694] CPU1: Booted secondary processor

<6>[ 1200.070393] cpu1 on

<6>[ 1200.075212] Switched to NOHz mode on CPU #1

<6>[ 1201.020531] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1201.020571] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1201.021130] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=814

<6>[ 1201.021340] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1201.021410] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1201.021460] sec-battery sec-battery: soc(87), vfocv(4046), vcell(3996), temp(34), charging(2), health(1), chg_adc(0)

<3>[ 1201.066526] [TSP] Dn[0]

<3>[ 1201.086022] [TSP] t: 4, a: 0

<3>[ 1201.146197] [TSP] t: 4, a: 0

<3>[ 1201.163882] [TSP] t: 4, a: 0

<3>[ 1201.181309] [TSP] t: 4, a: 0

<3>[ 1201.199054] [TSP] t: 5, a: 0

<3>[ 1201.216886] [TSP] t: 3, a: 0

<3>[ 1201.234322] [TSP] t: 4, a: 0

<3>[ 1201.251928] [TSP] t: 4, a: 0

<3>[ 1201.271889] [TSP] t: 4, a: 0

<3>[ 1201.289354] [TSP] t: 3, a: 0

<3>[ 1201.306959] [TSP] t: 3, a: 0

<3>[ 1201.324030] [TSP] t: 4, a: 0

<3>[ 1201.341181] [TSP] t: 4, a: 0

<3>[ 1201.358156] [TSP] t: 5, a: 0

<3>[ 1201.375021] [TSP] t: 5, a: 0

<3>[ 1201.391816] [TSP] t: 5, a: 0

<3>[ 1201.392007] [TSP] calibration was good

<3>[ 1201.392751] [TSP] ta_status is 0

<6>[ 1201.523590] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<3>[ 1201.588506] [TSP] Up[0]

<6>[ 1202.070666] cpu1 turnning off!

<4>[ 1202.077208] IRQ112 no longer affine to CPU1

<5>[ 1202.078164] CPU1: shutdown

<6>[ 1202.080549] cpu1 off!

<3>[ 1203.558982] [TSP] Dn[0]

<3>[ 1203.677493] [TSP] Up[0]

<6>[ 1203.812736] audss_clk_enable:ON : CLKSRC[0x1], CLKGATE[0x1c7]

<6>[ 1203.814394] G:P:DmaAddr=@61d60000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000

<7>[ 1203.816395] i2s_txctrl:Turn on

<6>[ 1204.080301] cpu1 turning on!

<4>[ 1204.099857] CPU1: Booted secondary processor

<6>[ 1204.100861] cpu1 on

<6>[ 1204.105247] Switched to NOHz mode on CPU #1

<6>[ 1206.100355] cpu1 turnning off!

<4>[ 1206.101532] IRQ112 no longer affine to CPU1

<5>[ 1206.102878] CPU1: shutdown

<6>[ 1206.104225] cpu1 off!

<7>[ 1206.902452] i2s_txctrl: Turn Off - spr is no active

<6>[ 1206.902693] audss_clk_enable:OFF: CLKSRC[0x1], CLKGATE[0x1c3]

<6>[ 1207.600299] cpu1 turning on!

<4>[ 1207.616714] CPU1: Booted secondary processor

<6>[ 1207.617936] cpu1 on

<6>[ 1207.620229] Switched to NOHz mode on CPU #1

<6>[ 1209.615557] cpu1 turnning off!

<4>[ 1209.625638] IRQ112 no longer affine to CPU1

<5>[ 1209.627558] CPU1: shutdown

<6>[ 1209.630080] cpu1 off!

<6>[ 1211.041307] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1211.041410] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1211.042334] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=808

<6>[ 1211.042884] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1211.043076] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1211.043224] sec-battery sec-battery: soc(86), vfocv(4045), vcell(3858), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1211.549183] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<3>[ 1212.555747] [TSP] Dn[0]

<3>[ 1213.278514] [TSP] Up[0]

<3>[ 1214.109859] [TSP] Dn[0]

<3>[ 1214.273177] [TSP] Up[0]

<6>[ 1214.379151] audss_clk_enable:ON : CLKSRC[0x1], CLKGATE[0x1c7]

<6>[ 1214.382311] G:P:DmaAddr=@61d60000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000

<7>[ 1214.386074] i2s_txctrl:Turn on

<7>[ 1217.472271] i2s_txctrl: Turn Off - spr is no active

<6>[ 1217.472872] audss_clk_enable:OFF: CLKSRC[0x1], CLKGATE[0x1c3]

<3>[ 1217.654702] [TSP] Dn[0]

<3>[ 1217.772477] [TSP] Up[0]

<6>[ 1217.805655] audss_clk_enable:ON : CLKSRC[0x1], CLKGATE[0x1c7]

<6>[ 1217.808677] G:P:DmaAddr=@61d60000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000

<7>[ 1217.812132] i2s_txctrl:Turn on

<6>[ 1218.125291] cpu1 turning on!

<4>[ 1218.146499] CPU1: Booted secondary processor

<6>[ 1218.148270] cpu1 on

<6>[ 1218.150217] Switched to NOHz mode on CPU #1

<3>[ 1220.000821] [TSP] Dn[0]

<6>[ 1220.145511] cpu1 turnning off!

<4>[ 1220.153310] IRQ112 no longer affine to CPU1

<5>[ 1220.154444] CPU1: shutdown

<6>[ 1220.163544] cpu1 off!

<3>[ 1220.256283] [TSP] Up[0]

<6>[ 1220.880595] sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=380

<7>[ 1220.898220] i2s_txctrl: Turn Off - spr is no active

<6>[ 1220.898538] audss_clk_enable:OFF: CLKSRC[0x1], CLKGATE[0x1c3]

<3>[ 1221.060484] [TSP] Dn[0]

<6>[ 1221.060699] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1221.060749] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1221.061391] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=805

<6>[ 1221.061617] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1221.061705] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1221.061767] sec-battery sec-battery: soc(86), vfocv(4044), vcell(3973), temp(34), charging(2), health(1), chg_adc(0)

<3>[ 1221.224545] [TSP] Up[0]

<6>[ 1221.274204] audss_clk_enable:ON : CLKSRC[0x1], CLKGATE[0x1c7]

<6>[ 1221.276025] G:P:DmaAddr=@61d60000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000

<7>[ 1221.278099] i2s_txctrl:Turn on

<6>[ 1221.569282] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<3>[ 1221.978088] [TSP] Dn[0]

<3>[ 1222.232199] [TSP] Up[0]

<3>[ 1222.913955] [TSP] Dn[0]

<3>[ 1223.092974] [TSP] Up[0]

<6>[ 1223.660276] cpu1 turning on!

<4>[ 1223.676485] CPU1: Booted secondary processor

<6>[ 1223.680242] Switched to NOHz mode on CPU #1

<6>[ 1223.680439] cpu1 on

<6>[ 1225.680629] cpu1 turnning off!

<4>[ 1225.688848] IRQ112 no longer affine to CPU1

<5>[ 1225.690658] CPU1: shutdown

<6>[ 1225.696459] cpu1 off!

<7>[ 1226.267675] i2s_txctrl: Turn Off - spr is no active

<6>[ 1226.267913] audss_clk_enable:OFF: CLKSRC[0x1], CLKGATE[0x1c3]

<6>[ 1231.101666] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1231.101841] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1231.102924] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=797

<6>[ 1231.104029] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1231.104342] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1231.104576] sec-battery sec-battery: soc(86), vfocv(4043), vcell(3935), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1231.609254] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1234.291065] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1235.846731] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1236.122972] audss_clk_enable:ON : CLKSRC[0x1], CLKGATE[0x1c7]

<6>[ 1236.124952] G:P:DmaAddr=@61d60000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000

<7>[ 1236.127300] i2s_txctrl:Turn on

<3>[ 1236.826396] [TSP] Dn[0]

<3>[ 1236.973796] [TSP] Up[0]

<6>[ 1237.200296] cpu1 turning on!

<4>[ 1237.220392] CPU1: Booted secondary processor

<6>[ 1237.221781] cpu1 on

<6>[ 1237.225237] Switched to NOHz mode on CPU #1

<3>[ 1238.238445] [TSP] Dn[0]

<3>[ 1238.720182] [TSP] Up[0]

<3>[ 1239.063040] [TSP] Dn[0]

<3>[ 1239.211490] [TSP] Up[0]

<6>[ 1239.220389] cpu1 turnning off!

<4>[ 1239.221337] IRQ112 no longer affine to CPU1

<5>[ 1239.221946] CPU1: shutdown

<6>[ 1239.223125] cpu1 off!

<6>[ 1239.720307] cpu1 turning on!

<4>[ 1239.743370] CPU1: Booted secondary processor

<6>[ 1239.744491] cpu1 on

<6>[ 1239.745224] Switched to NOHz mode on CPU #1

<3>[ 1240.178465] [TSP] Dn[0]

<3>[ 1240.614117] [TSP] Up[0]

<6>[ 1241.126020] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1241.126122] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1241.127068] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=795

<6>[ 1241.127493] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1241.127674] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1241.127813] sec-battery sec-battery: soc(86), vfocv(4042), vcell(3996), temp(34), charging(2), health(1), chg_adc(0)

<3>[ 1241.567726] [TSP] Dn[0]

<6>[ 1241.654848] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<3>[ 1241.686158] [TSP] Up[0]

<6>[ 1241.740364] cpu1 turnning off!

<4>[ 1241.741238] IRQ112 no longer affine to CPU1

<5>[ 1241.741745] CPU1: shutdown

<6>[ 1241.742997] cpu1 off!

<3>[ 1242.951775] [TSP] Dn[0]

<3>[ 1242.994332] [TSP] Up[0]

<3>[ 1243.038149] [TSP] Dn[0]

<3>[ 1243.216831] [TSP] Up[0]

<6>[ 1244.129074] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1244.835264] [VIB] vibrator_work: pwm_config duty=32935

<7>[ 1246.247157] i2s_txctrl: Turn Off - spr is no active

<6>[ 1246.247715] audss_clk_enable:OFF: CLKSRC[0x1], CLKGATE[0x1c3]

<6>[ 1251.166050] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1251.166181] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1251.167167] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=789

<6>[ 1251.167626] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1251.167867] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1251.168045] sec-battery sec-battery: soc(86), vfocv(4041), vcell(3998), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1251.688289] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<3>[ 1256.677254] [TSP] Dn[0]

<3>[ 1256.793651] [TSP] Up[0]

<6>[ 1261.206023] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1261.206153] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1261.207139] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=787

<6>[ 1261.207594] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1261.207836] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1261.208012] sec-battery sec-battery: soc(86), vfocv(4040), vcell(3998), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1261.728192] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1264.725137] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1264.725372] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1264.764252] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1264.764391] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1268.240305] cpu1 turning on!

<4>[ 1268.261520] CPU1: Booted secondary processor

<6>[ 1268.262494] cpu1 on

<6>[ 1268.265226] Switched to NOHz mode on CPU #1

<6>[ 1269.989420] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(0)

<7>[ 1269.989460] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1270.260586] cpu1 turnning off!

<4>[ 1270.262591] IRQ112 no longer affine to CPU1

<5>[ 1270.263738] CPU1: shutdown

<6>[ 1270.267167] cpu1 off!

<6>[ 1271.196300] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1271.196441] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1271.241101] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1271.241234] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1271.242221] sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=783

<6>[ 1271.242678] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1271.242916] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1271.243093] sec-battery sec-battery: soc(86), vfocv(4040), vcell(3992), temp(35), charging(2), health(1), chg_adc(0)

<6>[ 1271.771225] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1274.770298] cpu1 turning on!

<4>[ 1274.787497] CPU1: Booted secondary processor

<6>[ 1274.788218] cpu1 on

<6>[ 1274.790230] Switched to NOHz mode on CPU #1

<6>[ 1276.418492] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(0)

<7>[ 1276.418635] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1276.633083] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(1)

<7>[ 1276.633223] [sec_bat_check_event_status] current batt_event_status = 0xc0

<6>[ 1276.785467] cpu1 turnning off!

<4>[ 1276.787179] IRQ112 no longer affine to CPU1

<5>[ 1276.788046] CPU1: shutdown

<6>[ 1276.790954] cpu1 off!

<6>[ 1277.327781] sec-battery sec-battery: [NA_SPR]sec_bat_store: WIMAX(0)

<7>[ 1277.327993] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1281.260975] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1281.261075] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1281.261995] sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=779

<6>[ 1281.262404] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1281.262586] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1281.262725] sec-battery sec-battery: soc(86), vfocv(4038), vcell(3970), temp(35), charging(2), health(1), chg_adc(0)

<6>[ 1281.826576] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1283.865390] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1287.790280] cpu1 turning on!

<4>[ 1287.804808] CPU1: Booted secondary processor

<6>[ 1287.807148] cpu1 on

<6>[ 1287.810228] Switched to NOHz mode on CPU #1

<6>[ 1289.805742] cpu1 turnning off!

<4>[ 1289.806378] IRQ112 no longer affine to CPU1

<5>[ 1289.806778] CPU1: shutdown

<6>[ 1289.807829] cpu1 off!

<6>[ 1290.305276] cpu1 turning on!

<4>[ 1290.332722] CPU1: Booted secondary processor

<6>[ 1290.333558] cpu1 on

<6>[ 1290.335213] Switched to NOHz mode on CPU #1

<6>[ 1291.280469] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1291.280500] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1291.281018] sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=775

<6>[ 1291.281208] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1291.281265] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1291.281306] sec-battery sec-battery: soc(86), vfocv(4037), vcell(3994), temp(35), charging(2), health(1), chg_adc(0)

<6>[ 1291.844209] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1294.330553] cpu1 turnning off!

<4>[ 1294.337688] IRQ112 no longer affine to CPU1

<5>[ 1294.338862] CPU1: shutdown

<6>[ 1294.342377] cpu1 off!

<6>[ 1298.840340] cpu1 turning on!

<4>[ 1298.864116] CPU1: Booted secondary processor

<6>[ 1298.865212] Switched to NOHz mode on CPU #1

<6>[ 1298.865373] cpu1 on

<6>[ 1300.865366] cpu1 turnning off!

<4>[ 1300.866249] IRQ112 no longer affine to CPU1

<5>[ 1300.866766] CPU1: shutdown

<6>[ 1300.868413] cpu1 off!

<6>[ 1301.301103] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1301.301237] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1301.302223] sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=774

<6>[ 1301.302685] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1301.302925] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1301.303102] sec-battery sec-battery: soc(85), vfocv(4036), vcell(3961), temp(35), charging(2), health(1), chg_adc(0)

<6>[ 1301.871016] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1311.246132] sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=390

<6>[ 1311.326095] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1311.326226] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1311.327211] sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=773

<6>[ 1311.327669] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1311.327907] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1311.328084] sec-battery sec-battery: soc(85), vfocv(4035), vcell(3928), temp(35), charging(2), health(1), chg_adc(0)

<6>[ 1311.887651] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1321.361082] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1321.361216] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1321.362204] sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=769

<6>[ 1321.362700] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1321.362960] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1321.363148] sec-battery sec-battery: soc(85), vfocv(4034), vcell(3996), temp(35), charging(2), health(1), chg_adc(0)

<6>[ 1321.961675] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1331.381139] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1331.381273] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1331.382262] sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=767

<6>[ 1331.382764] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1331.383028] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1331.383216] sec-battery sec-battery: soc(85), vfocv(4033), vcell(3997), temp(35), charging(2), health(1), chg_adc(0)

<6>[ 1331.989467] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<3>[ 1338.590728] [TSP] Dn[0]

<3>[ 1338.829830] [TSP] Up[0]

<3>[ 1339.485765] [TSP] Dn[0]

<3>[ 1339.707965] [TSP] Up[0]

<6>[ 1341.040115] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1341.280494] sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=380

<6>[ 1341.405543] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1341.405590] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1341.406169] sec-battery sec-battery: sec_bat_check_temper: temp=360, adc=765

<6>[ 1341.406390] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1341.406476] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1341.406538] sec-battery sec-battery: soc(85), vfocv(4033), vcell(3990), temp(36), charging(2), health(1), chg_adc(0)

<6>[ 1341.865357] cpu1 turning on!

<4>[ 1341.877011] CPU1: Booted secondary processor

<6>[ 1341.877673] cpu1 on

<6>[ 1341.880215] Switched to NOHz mode on CPU #1

<6>[ 1342.027215] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1343.875619] cpu1 turnning off!

<4>[ 1343.878258] IRQ112 no longer affine to CPU1

<5>[ 1343.880051] CPU1: shutdown

<6>[ 1343.883563] cpu1 off!

<6>[ 1351.441410] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1351.441541] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1351.442527] sec-battery sec-battery: sec_bat_check_temper: temp=370, adc=762

<6>[ 1351.442989] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1351.443227] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1351.443405] sec-battery sec-battery: soc(85), vfocv(4031), vcell(3890), temp(37), charging(2), health(1), chg_adc(0)

<6>[ 1352.115784] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1356.380303] cpu1 turning on!

<4>[ 1356.401519] CPU1: Booted secondary processor

<6>[ 1356.405241] Switched to NOHz mode on CPU #1

<6>[ 1356.405426] cpu1 on

<6>[ 1358.405469] cpu1 turnning off!

<4>[ 1358.411107] IRQ112 no longer affine to CPU1

<5>[ 1358.411386] CPU1: shutdown

<6>[ 1358.411999] cpu1 off!

<6>[ 1358.910362] cpu1 turning on!

<4>[ 1358.940498] CPU1: Booted secondary processor

<6>[ 1358.945275] Switched to NOHz mode on CPU #1

<6>[ 1358.946804] cpu1 on

<6>[ 1361.506458] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1361.506590] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1361.507572] sec-battery sec-battery: sec_bat_check_temper: temp=370, adc=763

<6>[ 1361.508322] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1361.508563] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1361.508740] sec-battery sec-battery: soc(85), vfocv(4031), vcell(3991), temp(37), charging(2), health(1), chg_adc(0)

<6>[ 1362.232024] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<3>[ 1362.888505] [TSP] Dn[0]

<6>[ 1362.908610] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1362.945354] cpu1 turnning off!

<4>[ 1362.946130] IRQ112 no longer affine to CPU1

<5>[ 1362.946596] CPU1: shutdown

<6>[ 1362.948459] cpu1 off!

<3>[ 1363.020628] [TSP] Up[0]

<6>[ 1363.123783] audss_clk_enable:ON : CLKSRC[0x1], CLKGATE[0x1c7]

<6>[ 1363.126809] G:P:DmaAddr=@61d60000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000

<7>[ 1363.130385] i2s_txctrl:Turn on

<6>[ 1363.445287] cpu1 turning on!

<4>[ 1363.457188] CPU1: Booted secondary processor

<6>[ 1363.457903] cpu1 on

<6>[ 1363.460228] Switched to NOHz mode on CPU #1

<3>[ 1364.503424] [TSP] Dn[0]

<3>[ 1364.636528] [TSP] Up[0]

<3>[ 1365.386438] [TSP] Dn[0]

<6>[ 1365.455385] cpu1 turnning off!

<4>[ 1365.461480] IRQ112 no longer affine to CPU1

<5>[ 1365.462089] CPU1: shutdown

<6>[ 1365.464511] cpu1 off!

<3>[ 1365.535252] [TSP] Up[0]

<6>[ 1365.960274] cpu1 turning on!

<4>[ 1365.980218] CPU1: Booted secondary processor

<6>[ 1365.983378] cpu1 on

<6>[ 1365.985223] Switched to NOHz mode on CPU #1

<6>[ 1366.755786] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1366.755821] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1367.918903] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1367.918978] [sec_bat_check_event_status] current batt_event_status = 0x40

<7>[ 1368.769973] i2s_txctrl: Turn Off - spr is no active

<6>[ 1368.770275] audss_clk_enable:OFF: CLKSRC[0x1], CLKGATE[0x1c3]

<6>[ 1369.482842] audss_clk_enable:ON : CLKSRC[0x1], CLKGATE[0x1c7]

<6>[ 1369.484791] G:P:DmaAddr=@61d60000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000

<7>[ 1369.486999] i2s_txctrl:Turn on

<6>[ 1369.980595] cpu1 turnning off!

<4>[ 1369.982813] IRQ112 no longer affine to CPU1

<5>[ 1369.983911] CPU1: shutdown

<6>[ 1369.990695] cpu1 off!

<3>[ 1370.588237] [TSP] Dn[0]

<3>[ 1370.660267] [TSP] Up[0]

<6>[ 1371.360995] sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=410

<6>[ 1371.521123] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1371.521175] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1371.521716] sec-battery sec-battery: sec_bat_check_temper: temp=370, adc=764

<6>[ 1371.522220] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1371.522294] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1371.522348] sec-battery sec-battery: soc(85), vfocv(4030), vcell(3966), temp(37), charging(2), health(1), chg_adc(0)

<6>[ 1371.990354] cpu1 turning on!

<4>[ 1372.006628] CPU1: Booted secondary processor

<6>[ 1372.007767] cpu1 on

<6>[ 1372.010232] Switched to NOHz mode on CPU #1

<6>[ 1372.519245] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<7>[ 1373.849896] i2s_txctrl: Turn Off - spr is no active

<6>[ 1373.850582] audss_clk_enable:OFF: CLKSRC[0x1], CLKGATE[0x1c3]

<6>[ 1374.005772] cpu1 turnning off!

<4>[ 1374.007829] IRQ112 no longer affine to CPU1

<5>[ 1374.009115] CPU1: shutdown

<6>[ 1374.012473] cpu1 off!

<6>[ 1381.616231] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1381.616367] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1381.617349] sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=767

<6>[ 1381.617878] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1381.618118] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1381.618296] sec-battery sec-battery: soc(85), vfocv(4028), vcell(3902), temp(35), charging(2), health(1), chg_adc(0)

<6>[ 1382.525724] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1387.161346] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1387.161491] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1391.776233] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1391.776371] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(4 s)

<6>[ 1391.776544] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1391.777522] sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=769

<6>[ 1391.777987] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1391.778226] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1391.778404] sec-battery sec-battery: soc(85), vfocv(4028), vcell(3988), temp(35), charging(2), health(1), chg_adc(0)

<6>[ 1392.670873] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<3>[ 1397.998140] [TSP] Dn[0]

<3>[ 1398.372961] [TSP] Up[0]

<6>[ 1401.511093] sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=380

<6>[ 1401.866215] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1401.866350] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(14 s)

<6>[ 1401.866524] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1401.867497] sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=775

<6>[ 1401.867951] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1401.868193] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1401.868371] sec-battery sec-battery: soc(85), vfocv(4027), vcell(4016), temp(35), charging(2), health(1), chg_adc(0)

<6>[ 1402.705663] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1403.417896] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1403.418451] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1404.020936] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1404.510281] cpu1 turning on!

<4>[ 1404.521966] CPU1: Booted secondary processor

<6>[ 1404.522630] cpu1 on

<6>[ 1404.525207] Switched to NOHz mode on CPU #1

<6>[ 1405.908007] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1406.520634] cpu1 turnning off!

<4>[ 1406.527515] IRQ112 no longer affine to CPU1

<5>[ 1406.528471] CPU1: shutdown

<6>[ 1406.533160] cpu1 off!

<6>[ 1406.794599] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1406.794665] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1411.956230] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1411.956368] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(5 s)

<6>[ 1411.956541] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1411.957582] sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=777

<6>[ 1411.958069] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1411.958308] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1411.958486] sec-battery sec-battery: soc(85), vfocv(4027), vcell(4018), temp(35), charging(2), health(1), chg_adc(0)

<6>[ 1412.795803] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1422.016035] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1422.016171] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(15 s)

<6>[ 1422.016345] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1422.017382] sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=781

<6>[ 1422.017843] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1422.018080] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1422.018258] sec-battery sec-battery: soc(84), vfocv(4026), vcell(4028), temp(35), charging(2), health(1), chg_adc(0)

<6>[ 1422.805633] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1426.880779] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1426.880925] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1429.530292] cpu1 turning on!

<4>[ 1429.543968] CPU1: Booted secondary processor

<6>[ 1429.545220] Switched to NOHz mode on CPU #1

<6>[ 1429.549864] cpu1 on

<6>[ 1431.546257] sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=370

<6>[ 1431.548919] cpu1 turnning off!

<4>[ 1431.556107] IRQ112 no longer affine to CPU1

<5>[ 1431.557394] CPU1: shutdown

<6>[ 1431.560069] cpu1 off!

<6>[ 1432.046018] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1432.046146] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1432.047128] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=787

<6>[ 1432.047582] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1432.047820] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1432.047997] sec-battery sec-battery: soc(84), vfocv(4026), vcell(4031), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1433.000859] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1439.790945] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1439.791090] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1442.095981] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1442.096117] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(2 s)

<6>[ 1442.096290] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1442.097275] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=792

<6>[ 1442.097797] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1442.098060] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1442.098251] sec-battery sec-battery: soc(84), vfocv(4026), vcell(4003), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1443.045751] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1452.196209] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1452.196349] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(12 s)

<6>[ 1452.196522] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1452.197569] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=795

<6>[ 1452.198040] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1452.198281] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1452.198459] sec-battery sec-battery: soc(84), vfocv(4026), vcell(4025), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1453.210849] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1460.073285] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1460.073430] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1461.661028] sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=350

<6>[ 1462.122491] request_suspend_state: sleep (0->3) at 1462122261600 (2012-08-03 16:24:54.453213851 UTC)

<7>[ 1462.122791] [TouchKey] sec_touchkey_early_suspend

<6>[ 1462.201085] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1462.201216] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1462.202257] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=800

<6>[ 1462.202764] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1462.203026] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1462.203215] sec-battery sec-battery: soc(84), vfocv(4026), vcell(4032), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1462.624526] lcd panel: id=0 brightness=0, bl=0, candela=30

<6>[ 1462.682909] lcd panel: +ld9040_early_suspend

<6>[ 1462.682985] lcd panel: ld9040_power_off

<6>[ 1463.003636] lcd panel: -ld9040_early_suspend

<6>[ 1463.003665] +s3cfb_early_suspend

<7>[ 1463.017239] s3cfb - disable power domain

<6>[ 1463.017270] -s3cfb_early_suspend

<6>[ 1463.051394] active wake lock PowerManagerService

<6>[ 1463.055285] cpu1 turning on!

<6>[ 1463.077337] suspend: enter suspend

<6>[ 1463.077364] suspend: enter suspend, (2012-08-03 16:24:55.3227688132 UTC)

<6>[ 1463.077396] PM: Syncing filesystems ... CPU1: Booted secondary processor

<6>[ 1463.087176] cpu1 on

<4>[ 1463.090034] done.

<6>[ 1463.090211] Switched to NOHz mode on CPU #1

<6>[ 1463.090962] exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0

<4>[ 1463.091001] Freezing user space processes ... (elapsed 0.01 seconds) done.

<4>[ 1463.110384] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

<4>[ 1463.125351] Suspending console(s) (use no_console_suspend to debug)

<6>[ 1463.151547] max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2012-08-03 16:25:24

<6>[ 1463.260411] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1463.459742] IDPRAM : <dpram_power_down:3431> Received MBX_CMD_DPRAM_DOWN (lock count = 0)!!!

<6>[ 1463.459812] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 0

<6>[ 1463.460501] wake enabled for irq 359

<6>[ 1463.460770] USB3803 suspended

<6>[ 1463.460942] sec_jack_suspend: enable_irq_wake(0)

<7>[ 1463.461077] usb: android_work config=  (null),connected=0,sw_connected=0

<6>[ 1463.461114] android_work: did not send uevent (0 0   (null))

<6>[ 1463.461597] exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.

<6>[ 1463.465250] s5p_int_src_ext_hpd()

<6>[ 1463.465402] wake enabled for irq 375

<6>[ 1463.465425] wake enabled for irq 381

<6>[ 1463.465465] sdhci_suspend_host : Enter WIFI suspend

<4>[ 1463.465576] WARNING: driver C732SDIO did not remove its interrupt handler!

<6>[ 1463.465890] mmc2: card 0001 removed

<6>[ 1463.466063] sdhci_suspend_host : Enter WIFI suspend

<6>[ 1463.466130] u1_enable_regulator_for_usb_mipi: disable LDOs

<6>[ 1463.512142] PM: suspend of devices complete after 384.877 msecs

<4>[ 1463.516651] suspend_set_state: LED_A_2.8V: No configuration

<6>[ 1463.520959] power_suspend_late return 0

<6>[ 1463.520990] PM: late suspend of devices complete after 1.578 msecs

<4>[ 1463.521023] Disabling non-boot CPUs ...

<4>[ 1463.521520] IRQ112 no longer affine to CPU1

<5>[ 1463.521766] CPU1: shutdown

<1>[ 1463.522633] PM: SLEEP

<6>[ 2199.000680] WAKEUP_STAT: 0x80000001

<6>[ 2199.000680] WAKEUP_INTx_PEND: 0x0, 0x1, 0x0, 0x0

<6>[ 1463.522480] Enabling non-boot CPUs ...

<4>[ 1463.533934] CPU1: Booted secondary processor

<6>[ 1463.534936] CPU1 is up

<6>[ 1463.535211] Switched to NOHz mode on CPU #1

<6>[ 1463.536252] PM: early resume of devices complete after 1.290 msecs

<6>[ 1463.536486] wakeup wake lock: DPRAM_PWDOWN

<6>[ 1463.536843] exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.

<6>[ 1463.537109] mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########

<6>[ 1463.537504] u1_enable_regulator_for_usb_mipi: enable LDOs

<6>[ 1463.539745] wake disabled for irq 375

<6>[ 1463.539773] wake disabled for irq 381

<6>[ 1463.539870] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

<4>[ 1463.540945] usb usb1: root hub lost power or was reset

<6>[ 1463.565295] sec_jack_resume: disable_irq_wake(0)

<6>[ 1463.565512] USB3803 resumed to mode standby

<6>[ 1463.566744] wake disabled for irq 359

<6>[ 1463.570045] IDPRAM : <dpram_power_up:3468> dpram_wakeup_init() ==> QSC_INT = HIGH

<6>[ 1463.570628] IDPRAM : <dpram_powerup_start:3440> Received MBX_CMD_CP_WAKEUP_START!!!

<3>[ 1463.730610] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1463.735713] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1463.735800] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<1>[ 1463.735870] _cy_as_device: cy_as_event_misc_awake event callback triggered

<3>[ 1463.745234] [cyasdevice.c] cyasdevice_leave_standby end mode  count=8

<3>[ 1463.760916] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1463.761005] cyasblkdev_stop_sdcard : cy_as_storage_stop is called - found

<3>[ 1463.761177] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1464.194454] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1464.194543] cyasblkdev_start_sdcard : cy_as_storage_start is called

<3>[ 1464.194727] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1464.194810] cyasblkdev_start_sdcard : cy_as_storage_query_media is called - media count = 1

<3>[ 1464.195015] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1464.195119] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1464.195223] cyasblkdev_start_sdcard : cy_as_storage_query_device is called - found

<6>[ 1464.195675] PM: resume of devices complete after 659.076 msecs

<4>[ 1464.196710] Restarting tasks ... done.

<6>[ 1464.209278] exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0

<6>[ 1464.209339] suspend: exit suspend, ret = 0 (2012-08-03 16:24:57.508873500 UTC)

<3>[ 1464.209401] [cyasdevice.c] cy_wq_function:					leave standby

<3>[ 1464.209439] ++++++++++++  [cyasdevice.c] cy_wq_function: SD card is inserted.

<3>[ 1464.209633] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1464.215259] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1464.215360] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1464.215468] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1464.215564] cyasblkdev_check_sdcard : serial num = 0x7b 0xc4 0x42 0x95

<6>[ 1464.215659] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1464.215696] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1464.216262] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=802

<6>[ 1464.221605] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1464.221802] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1464.221941] sec-battery sec-battery: soc(84), vfocv(4026), vcell(4020), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1464.237414] request_suspend_state: wakeup (3->0) at 1464237183727 (2012-08-03 16:24:57.536898709 UTC)

<6>[ 1464.248763] mmc2: cmd 8 command timeout error

<4>[ 1464.249248] mmc2: card claims to support voltages below the defined range. These will be ignored.

<6>[ 1464.289879] mmc2: new high speed SDIO card at address 0001

<3>[ 1464.363835] [TSP] ta_status is 0

<3>[ 1464.363869] [TSP] mxt224_ta_probe

<3>[ 1464.364530] [TSP] Calibration!!!!!!

<3>[ 1464.365247] [TSP] Calibration End!!!!!!

<3>[ 1464.385273] [TSP]TA_probe MXT224E T48 Byte2 is 66

<3>[ 1464.400278] [TSP]TA_probe MXT224E T48 Byte2 is 98

<3>[ 1464.401878] [TSP] calibration success!!!

<6>[ 1464.402283] +s3cfb_late_resume

<7>[ 1464.402303] s3cfb - enable power domain

<6>[ 1464.402417] s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff

<7>[ 1464.402456] FIMD src sclk = 50000000

<6>[ 1464.402479] s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2

<6>[ 1464.402542] mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI

<6>[ 1464.402636] -s3cfb_late_resume

<6>[ 1464.402655] lcd panel: +ld9040_late_resume

<6>[ 1464.402677] lcd panel: ld9040_power_on

<3>[ 1464.417221] [TSP] Calibration!!!!!!

<3>[ 1464.429216] [TSP] Calibration End!!!!!!

<6>[ 1464.627538] lcd panel: id=0 brightness=27, bl=0, candela=30

<6>[ 1464.627572] lcd panel: -ld9040_late_resume

<6>[ 1464.627599] mdnie mdnie: +mdnie_late_resume

<6>[ 1464.627627] mdnie mdnie: -mdnie_late_resume

<7>[ 1464.627673] [TouchKey] sec_touchkey_late_resume

<6>[ 1464.628159] s5p_gpioint_set_type irq:389 is at GPL0(5)

<6>[ 1464.651935] lcd panel: id=0 brightness=31, bl=1, candela=40

<7>[ 1464.735886] [TouchKey] touchkey_autocalibration : data[0]=8 data[1]=e data[2]=8 data[3]=0

<7>[ 1464.841080] [Touchkey] autocal disabled, retry 0

<7>[ 1464.841705] [TouchKey] touchkey_autocalibration : data[0]=50 data[1]=e data[2]=8 data[3]=1

<7>[ 1464.946118] [Touchkey] autocal Enabled

<6>[ 1465.024518] lcd panel: id=0 brightness=70, bl=2, candela=70

<6>[ 1465.085309] cpu1 turnning off!

<4>[ 1465.090906] IRQ112 no longer affine to CPU1

<5>[ 1465.092879] CPU1: shutdown

<6>[ 1465.095134] cpu1 off!

<3>[ 1465.215388] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1465.215472] [cyasdevice.c] cyasdevice_enter_standby  end mode

<6>[ 1465.223840] lcd panel: id=0 brightness=91, bl=3, candela=90

<6>[ 1465.313098] lcd panel: id=0 brightness=101, bl=4, candela=100

<6>[ 1472.979705] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1472.979868] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1473.586015] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1473.586605] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1473.586742] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(0 s)

<6>[ 1473.586924] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1473.587915] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=802

<6>[ 1473.588376] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1473.588616] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1473.588812] sec-battery sec-battery: soc(84), vfocv(4026), vcell(4020), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1474.242747] request_suspend_state: sleep (0->3) at 1474242508439 (2012-08-03 16:25:07.542219629 UTC)

<7>[ 1474.243064] [TouchKey] sec_touchkey_early_suspend

<6>[ 1474.743767] lcd panel: id=0 brightness=0, bl=0, candela=30

<6>[ 1474.748119] lcd panel: +ld9040_early_suspend

<6>[ 1474.748226] lcd panel: ld9040_power_off

<6>[ 1475.065801] lcd panel: -ld9040_early_suspend

<6>[ 1475.065831] +s3cfb_early_suspend

<7>[ 1475.081409] s3cfb - disable power domain

<6>[ 1475.081439] -s3cfb_early_suspend

<6>[ 1475.152780] suspend: enter suspend

<6>[ 1475.152847] suspend: enter suspend, (2012-08-03 16:25:08.000000000 UTC)

<6>[ 1475.152945] PM: Syncing filesystems ... done.

<6>[ 1475.183092] exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0

<4>[ 1475.183131] Freezing user space processes ... (elapsed 0.02 seconds) done.

<4>[ 1475.205407] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

<4>[ 1475.220362] Suspending console(s) (use no_console_suspend to debug)

<6>[ 1475.270560] max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2012-08-03 16:25:25

<6>[ 1475.561845] IDPRAM : <dpram_power_down:3431> Received MBX_CMD_DPRAM_DOWN (lock count = 0)!!!

<6>[ 1475.561922] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 0

<6>[ 1475.562580] wake enabled for irq 359

<6>[ 1475.562849] USB3803 suspended

<6>[ 1475.563019] sec_jack_suspend: enable_irq_wake(0)

<7>[ 1475.563153] usb: android_work config=  (null),connected=0,sw_connected=0

<6>[ 1475.563190] android_work: did not send uevent (0 0   (null))

<6>[ 1475.563674] exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.

<6>[ 1475.570254] s5p_int_src_ext_hpd()

<6>[ 1475.570406] wake enabled for irq 375

<6>[ 1475.570429] wake enabled for irq 381

<6>[ 1475.570665] mmc2: card 0001 removed

<6>[ 1475.570845] sdhci_suspend_host : Enter WIFI suspend

<6>[ 1475.570912] u1_enable_regulator_for_usb_mipi: disable LDOs

<6>[ 1475.615300] PM: suspend of devices complete after 393.019 msecs

<4>[ 1475.620141] suspend_set_state: LED_A_2.8V: No configuration

<6>[ 1475.624620] power_suspend_late return 0

<6>[ 1475.624652] PM: late suspend of devices complete after 1.536 msecs

<4>[ 1475.624686] Disabling non-boot CPUs ...

<1>[ 1475.625130] PM: SLEEP

<6>[ 2199.000680] WAKEUP_STAT: 0x80000001

<6>[ 2199.000680] WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0

<6>[ 1475.626310] PM: early resume of devices complete after 1.311 msecs

<6>[ 1475.626776] exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.

<6>[ 1475.627051] mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########

<6>[ 1475.627447] u1_enable_regulator_for_usb_mipi: enable LDOs

<6>[ 1475.629908] wake disabled for irq 375

<6>[ 1475.629934] wake disabled for irq 381

<6>[ 1475.629983] wakeup wake lock: event1-2067

<6>[ 1475.630062] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

<4>[ 1475.631163] usb usb1: root hub lost power or was reset

<6>[ 1475.655319] sec_jack_resume: disable_irq_wake(0)

<6>[ 1475.655533] USB3803 resumed to mode standby

<6>[ 1475.656762] wake disabled for irq 359

<6>[ 1475.656962] max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2

<6>[ 1475.657220] max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)

<6>[ 1475.657410] max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0

<4>[ 1475.657446] max8997 5-0066: Unused interrupt source: 0x0

<6>[ 1475.660474] IDPRAM : <dpram_power_up:3468> dpram_wakeup_init() ==> QSC_INT = LOW

<6>[ 1475.674966] IDPRAM : <dpram_powerup_start:3440> Received MBX_CMD_CP_WAKEUP_START!!!

<3>[ 1475.815616] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1475.820719] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1475.820807] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<1>[ 1475.820876] _cy_as_device: cy_as_event_misc_awake event callback triggered

<3>[ 1475.830245] [cyasdevice.c] cyasdevice_leave_standby end mode  count=8

<3>[ 1475.845929] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1475.846013] cyasblkdev_stop_sdcard : cy_as_storage_stop is called - found

<3>[ 1475.846184] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1476.279461] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1476.279548] cyasblkdev_start_sdcard : cy_as_storage_start is called

<3>[ 1476.279728] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1476.279812] cyasblkdev_start_sdcard : cy_as_storage_query_media is called - media count = 1

<3>[ 1476.280015] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1476.280114] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1476.280196] cyasblkdev_start_sdcard : cy_as_storage_query_device is called - found

<6>[ 1476.280668] PM: resume of devices complete after 654.069 msecs

<4>[ 1476.281670] Restarting tasks ...

<6>[ 1476.285416] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1476.285452] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(3 s)

<6>[ 1476.285502] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1476.286050] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=808

<6>[ 1476.286245] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1476.286313] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1476.286364] sec-battery sec-battery: soc(84), vfocv(4026), vcell(4046), temp(34), charging(2), health(1), chg_adc(0)

<4>[ 1476.301216] done.

<6>[ 1476.301933] exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0

<6>[ 1476.301984] suspend: exit suspend, ret = 0 (2012-08-03 16:25:25.511496708 UTC)

<3>[ 1476.302042] [cyasdevice.c] cy_wq_function:					leave standby

<3>[ 1476.302078] ++++++++++++  [cyasdevice.c] cy_wq_function: SD card is inserted.

<3>[ 1476.302273] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1476.310264] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1476.310350] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1476.310631] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1476.310711] cyasblkdev_check_sdcard : serial num = 0x7b 0xc4 0x42 0x95

<6>[ 1476.325695] request_suspend_state: wakeup (3->0) at 1476325489106 (2012-08-03 16:25:25.535198542 UTC)

<6>[ 1476.334390] mmc2: cmd 8 command timeout error

<4>[ 1476.334757] mmc2: card claims to support voltages below the defined range. These will be ignored.

<6>[ 1476.371685] mmc2: new high speed SDIO card at address 0001

<3>[ 1476.537153] [TSP] ta_status is 0

<3>[ 1476.537181] [TSP] mxt224_ta_probe

<3>[ 1476.537551] [TSP] Calibration!!!!!!

<3>[ 1476.545293] [TSP] Calibration End!!!!!!

<3>[ 1476.565285] [TSP]TA_probe MXT224E T48 Byte2 is 66

<3>[ 1476.580262] [TSP]TA_probe MXT224E T48 Byte2 is 98

<3>[ 1476.580585] [TSP] calibration success!!!

<6>[ 1476.580981] +s3cfb_late_resume

<7>[ 1476.580997] s3cfb - enable power domain

<6>[ 1476.581112] s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff

<7>[ 1476.581149] FIMD src sclk = 50000000

<6>[ 1476.581171] s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2

<6>[ 1476.581226] mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI

<6>[ 1476.581313] -s3cfb_late_resume

<6>[ 1476.581332] lcd panel: +ld9040_late_resume

<6>[ 1476.581353] lcd panel: ld9040_power_on

<3>[ 1476.601554] [TSP] Calibration!!!!!!

<3>[ 1476.613593] [TSP] Calibration End!!!!!!

<6>[ 1476.814400] lcd panel: id=0 brightness=26, bl=0, candela=30

<6>[ 1476.814525] lcd panel: -ld9040_late_resume

<6>[ 1476.814626] mdnie mdnie: +mdnie_late_resume

<6>[ 1476.814714] mdnie mdnie: -mdnie_late_resume

<7>[ 1476.814855] [TouchKey] sec_touchkey_late_resume

<6>[ 1476.815839] s5p_gpioint_set_type irq:389 is at GPL0(5)

<6>[ 1476.845037] lcd panel: id=0 brightness=30, bl=1, candela=40

<7>[ 1476.926318] [TouchKey] touchkey_autocalibration : data[0]=8 data[1]=e data[2]=8 data[3]=0

<6>[ 1476.946594] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1476.946737] [sec_bat_check_event_status] current batt_event_status = 0x40

<7>[ 1477.031701] [Touchkey] autocal disabled, retry 0

<7>[ 1477.032717] [TouchKey] touchkey_autocalibration : data[0]=50 data[1]=e data[2]=8 data[3]=1

<7>[ 1477.136150] [Touchkey] autocal Enabled

<6>[ 1477.214626] lcd panel: id=0 brightness=70, bl=2, candela=70

<3>[ 1477.310418] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1477.310504] [cyasdevice.c] cyasdevice_enter_standby  end mode

<6>[ 1477.402662] lcd panel: id=0 brightness=90, bl=3, candela=90

<6>[ 1477.512465] lcd panel: id=0 brightness=102, bl=4, candela=100

<6>[ 1477.590291] cpu1 turning on!

<4>[ 1477.608586] CPU1: Booted secondary processor

<6>[ 1477.609448] cpu1 on

<6>[ 1477.610234] Switched to NOHz mode on CPU #1

<6>[ 1479.605749] cpu1 turnning off!

<4>[ 1479.607643] IRQ112 no longer affine to CPU1

<5>[ 1479.608802] CPU1: shutdown

<6>[ 1479.612893] cpu1 off!

<6>[ 1485.765882] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1485.770706] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1485.770828] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1485.772471] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=808

<6>[ 1485.772915] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1485.773153] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1485.773330] sec-battery sec-battery: soc(84), vfocv(4026), vcell(4005), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1486.343342] request_suspend_state: sleep (0->3) at 1486343083235 (2012-08-03 16:25:35.552784087 UTC)

<7>[ 1486.343645] [TouchKey] sec_touchkey_early_suspend

<6>[ 1486.865419] lcd panel: +ld9040_early_suspend

<6>[ 1486.865526] lcd panel: ld9040_power_off

<6>[ 1487.187240] lcd panel: -ld9040_early_suspend

<6>[ 1487.187350] +s3cfb_early_suspend

<7>[ 1487.193438] s3cfb - disable power domain

<6>[ 1487.193552] -s3cfb_early_suspend

<6>[ 1487.304114] suspend: enter suspend

<6>[ 1487.304180] suspend: enter suspend, (2012-08-03 16:25:36.000000000 UTC)

<6>[ 1487.304261] PM: Syncing filesystems ... done.

<6>[ 1487.319256] exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0

<4>[ 1487.319295] Freezing user space processes ... (elapsed 0.02 seconds) done.

<4>[ 1487.340423] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

<4>[ 1487.355372] Suspending console(s) (use no_console_suspend to debug)

<6>[ 1487.381563] max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2012-08-03 16:28:04

<6>[ 1487.672609] IDPRAM : <dpram_power_down:3431> Received MBX_CMD_DPRAM_DOWN (lock count = 0)!!!

<6>[ 1487.672679] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 0

<6>[ 1487.673334] wake enabled for irq 359

<6>[ 1487.673599] USB3803 suspended

<6>[ 1487.673768] sec_jack_suspend: enable_irq_wake(0)

<7>[ 1487.673901] usb: android_work config=  (null),connected=0,sw_connected=0

<6>[ 1487.673938] android_work: did not send uevent (0 0   (null))

<6>[ 1487.674418] exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.

<6>[ 1487.680244] s5p_int_src_ext_hpd()

<6>[ 1487.680396] wake enabled for irq 375

<6>[ 1487.680419] wake enabled for irq 381

<6>[ 1487.680654] mmc2: card 0001 removed

<6>[ 1487.680827] sdhci_suspend_host : Enter WIFI suspend

<6>[ 1487.680894] u1_enable_regulator_for_usb_mipi: disable LDOs

<6>[ 1487.726013] PM: suspend of devices complete after 368.723 msecs

<4>[ 1487.730833] suspend_set_state: LED_A_2.8V: No configuration

<6>[ 1487.735327] power_suspend_late return 0

<6>[ 1487.735358] PM: late suspend of devices complete after 1.564 msecs

<4>[ 1487.735391] Disabling non-boot CPUs ...

<1>[ 1487.735820] PM: SLEEP

<6>[ 2199.000680] WAKEUP_STAT: 0x80000001

<6>[ 2199.000680] WAKEUP_INTx_PEND: 0x0, 0x2, 0x0, 0x0

<6>[ 1487.736976] PM: early resume of devices complete after 1.269 msecs

<6>[ 1487.737252] wakeup wake lock: wimax_driver

<6>[ 1487.737537] exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.

<6>[ 1487.737811] mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########

<6>[ 1487.738209] u1_enable_regulator_for_usb_mipi: enable LDOs

<6>[ 1487.740690] wake disabled for irq 375

<6>[ 1487.740716] wake disabled for irq 381

<6>[ 1487.740813] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

<4>[ 1487.741912] usb usb1: root hub lost power or was reset

<6>[ 1487.765332] sec_jack_resume: disable_irq_wake(0)

<6>[ 1487.765546] USB3803 resumed to mode standby

<6>[ 1487.766776] wake disabled for irq 359

<6>[ 1487.770160] IDPRAM : <dpram_power_up:3468> dpram_wakeup_init() ==> QSC_INT = LOW

<6>[ 1487.784751] IDPRAM : <dpram_powerup_start:3440> Received MBX_CMD_CP_WAKEUP_START!!!

<3>[ 1487.945629] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1487.950733] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1487.950822] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<1>[ 1487.950889] _cy_as_device: cy_as_event_misc_awake event callback triggered

<3>[ 1487.960258] [cyasdevice.c] cyasdevice_leave_standby end mode  count=8

<3>[ 1487.975943] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1487.976026] cyasblkdev_stop_sdcard : cy_as_storage_stop is called - found

<3>[ 1487.976198] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1488.409475] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1488.409562] cyasblkdev_start_sdcard : cy_as_storage_start is called

<3>[ 1488.409742] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1488.409826] cyasblkdev_start_sdcard : cy_as_storage_query_media is called - media count = 1

<3>[ 1488.410029] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1488.410130] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1488.410233] cyasblkdev_start_sdcard : cy_as_storage_query_device is called - found

<6>[ 1488.410686] PM: resume of devices complete after 673.315 msecs

<4>[ 1488.411683] Restarting tasks ...

<6>[ 1488.428793] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1488.428836] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1488.430087] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1488.430125] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(0 s)

<6>[ 1488.430175] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1488.430772] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=810

<6>[ 1488.431643] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1488.431714] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1488.431764] sec-battery sec-battery: soc(84), vfocv(4026), vcell(3983), temp(34), charging(2), health(1), chg_adc(0)

<4>[ 1488.433693] done.

<6>[ 1488.434343] exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0

<6>[ 1488.434393] suspend: exit suspend, ret = 0 (2012-08-03 16:25:49.533894833 UTC)

<6>[ 1488.434442] active wake lock mmc2_detect

<6>[ 1488.434466] active wake lock power-supply

<6>[ 1488.434490] active wake lock PowerManagerService

<6>[ 1488.434517] active wake lock radio-interface

<6>[ 1488.434543] active wake lock wimax_driver, time left 62

<6>[ 1488.434572] suspend: abort suspend

<3>[ 1488.434653] [cyasdevice.c] cy_wq_function:					leave standby

<3>[ 1488.434688] ++++++++++++  [cyasdevice.c] cy_wq_function: SD card is inserted.

<3>[ 1488.434886] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1488.440280] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1488.440361] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1488.440442] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1488.440516] cyasblkdev_check_sdcard : serial num = 0x7b 0xc4 0x42 0x95

<6>[ 1488.449951] request_suspend_state: wakeup (3->0) at 1488449732368 (2012-08-03 16:25:49.549443583 UTC)

<6>[ 1488.464398] mmc2: cmd 8 command timeout error

<4>[ 1488.471095] mmc2: card claims to support voltages below the defined range. These will be ignored.

<6>[ 1488.514247] mmc2: new high speed SDIO card at address 0001

<3>[ 1488.710871] [TSP] ta_status is 0

<3>[ 1488.710905] [TSP] mxt224_ta_probe

<3>[ 1488.711489] [TSP] Calibration!!!!!!

<3>[ 1488.720326] [TSP] Calibration End!!!!!!

<3>[ 1488.740316] [TSP]TA_probe MXT224E T48 Byte2 is 66

<3>[ 1488.755339] [TSP]TA_probe MXT224E T48 Byte2 is 98

<3>[ 1488.755680] [TSP] calibration success!!!

<6>[ 1488.756092] +s3cfb_late_resume

<7>[ 1488.756113] s3cfb - enable power domain

<6>[ 1488.756254] s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff

<7>[ 1488.756304] FIMD src sclk = 50000000

<6>[ 1488.756331] s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2

<6>[ 1488.756401] mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI

<6>[ 1488.756514] -s3cfb_late_resume

<6>[ 1488.756537] lcd panel: +ld9040_late_resume

<6>[ 1488.756564] lcd panel: ld9040_power_on

<3>[ 1488.773932] [TSP] Calibration!!!!!!

<3>[ 1488.785947] [TSP] Calibration End!!!!!!

<6>[ 1488.993648] lcd panel: id=0 brightness=21, bl=0, candela=30

<6>[ 1488.993775] lcd panel: -ld9040_late_resume

<6>[ 1488.993875] mdnie mdnie: +mdnie_late_resume

<6>[ 1488.993964] mdnie mdnie: -mdnie_late_resume

<7>[ 1488.994105] [TouchKey] sec_touchkey_late_resume

<6>[ 1488.995397] s5p_gpioint_set_type irq:389 is at GPL0(5)

<6>[ 1489.087893] lcd panel: id=0 brightness=31, bl=1, candela=40

<7>[ 1489.106355] [TouchKey] touchkey_autocalibration : data[0]=8 data[1]=e data[2]=8 data[3]=0

<7>[ 1489.211198] [Touchkey] autocal disabled, retry 0

<7>[ 1489.211865] [TouchKey] touchkey_autocalibration : data[0]=50 data[1]=e data[2]=8 data[3]=1

<7>[ 1489.316197] [Touchkey] autocal Enabled

<3>[ 1489.440448] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1489.440546] [cyasdevice.c] cyasdevice_enter_standby  end mode

<6>[ 1489.450945] lcd panel: id=0 brightness=70, bl=2, candela=70

<6>[ 1489.610369] cpu1 turning on!

<4>[ 1489.633506] CPU1: Booted secondary processor

<6>[ 1489.635110] cpu1 on

<6>[ 1489.635271] Switched to NOHz mode on CPU #1

<6>[ 1489.653073] lcd panel: id=0 brightness=91, bl=3, candela=90

<6>[ 1489.742617] lcd panel: id=0 brightness=101, bl=4, candela=100

<6>[ 1491.630507] cpu1 turnning off!

<4>[ 1491.632515] IRQ112 no longer affine to CPU1

<5>[ 1491.633688] CPU1: shutdown

<6>[ 1491.637067] cpu1 off!

<6>[ 1497.760798] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1497.761387] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1497.761513] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(9 s)

<6>[ 1497.761685] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1497.762666] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=812

<6>[ 1497.763109] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1497.763349] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1497.763526] sec-battery sec-battery: soc(84), vfocv(4026), vcell(3983), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1498.482316] request_suspend_state: sleep (0->3) at 1498482050000 (2012-08-03 16:25:59.581753006 UTC)

<7>[ 1498.482617] [TouchKey] sec_touchkey_early_suspend

<6>[ 1498.961033] lcd panel: id=0 brightness=0, bl=0, candela=30

<6>[ 1498.986512] lcd panel: +ld9040_early_suspend

<6>[ 1498.986619] lcd panel: ld9040_power_off

<6>[ 1499.306126] lcd panel: -ld9040_early_suspend

<6>[ 1499.306204] +s3cfb_early_suspend

<7>[ 1499.318371] s3cfb - disable power domain

<6>[ 1499.318444] -s3cfb_early_suspend

<6>[ 1499.395947] suspend: enter suspend

<6>[ 1499.395993] suspend: enter suspend, (2012-08-03 16:26:00.000000000 UTC)

<6>[ 1499.396043] PM: Syncing filesystems ... done.

<6>[ 1499.414457] exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0

<4>[ 1499.414498] Freezing user space processes ... (elapsed 0.02 seconds) done.

<4>[ 1499.435418] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

<4>[ 1499.450389] Suspending console(s) (use no_console_suspend to debug)

<6>[ 1499.500620] max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2012-08-03 16:28:04

<6>[ 1499.791960] IDPRAM : <dpram_power_down:3431> Received MBX_CMD_DPRAM_DOWN (lock count = 0)!!!

<6>[ 1499.792028] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 0

<6>[ 1499.792689] wake enabled for irq 359

<6>[ 1499.792955] USB3803 suspended

<6>[ 1499.793127] sec_jack_suspend: enable_irq_wake(0)

<7>[ 1499.793263] usb: android_work config=  (null),connected=0,sw_connected=0

<6>[ 1499.793302] android_work: did not send uevent (0 0   (null))

<6>[ 1499.793785] exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.

<6>[ 1499.800270] s5p_int_src_ext_hpd()

<6>[ 1499.800422] wake enabled for irq 375

<6>[ 1499.800446] wake enabled for irq 381

<6>[ 1499.800683] mmc2: card 0001 removed

<6>[ 1499.800859] sdhci_suspend_host : Enter WIFI suspend

<6>[ 1499.800928] u1_enable_regulator_for_usb_mipi: disable LDOs

<6>[ 1499.845369] PM: suspend of devices complete after 393.050 msecs

<4>[ 1499.850198] suspend_set_state: LED_A_2.8V: No configuration

<6>[ 1499.854697] power_suspend_late return 0

<6>[ 1499.854730] PM: late suspend of devices complete after 1.544 msecs

<4>[ 1499.854765] Disabling non-boot CPUs ...

<1>[ 1499.855197] PM: SLEEP

<6>[ 2199.000680] WAKEUP_STAT: 0x80000001

<6>[ 2199.000680] WAKEUP_INTx_PEND: 0x0, 0x2, 0x0, 0x0

<6>[ 1499.856376] PM: early resume of devices complete after 1.303 msecs

<6>[ 1499.856644] wakeup wake lock: wimax_driver

<6>[ 1499.856923] exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.

<6>[ 1499.857195] mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########

<6>[ 1499.857590] u1_enable_regulator_for_usb_mipi: enable LDOs

<6>[ 1499.860059] wake disabled for irq 375

<6>[ 1499.860085] wake disabled for irq 381

<6>[ 1499.860180] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

<4>[ 1499.861300] usb usb1: root hub lost power or was reset

<6>[ 1499.885344] sec_jack_resume: disable_irq_wake(0)

<6>[ 1499.885555] USB3803 resumed to mode standby

<6>[ 1499.886784] wake disabled for irq 359

<6>[ 1499.890169] IDPRAM : <dpram_power_up:3468> dpram_wakeup_init() ==> QSC_INT = LOW

<6>[ 1499.904815] IDPRAM : <dpram_powerup_start:3440> Received MBX_CMD_CP_WAKEUP_START!!!

<3>[ 1500.065641] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1500.070744] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1500.070846] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<1>[ 1500.070924] _cy_as_device: cy_as_event_misc_awake event callback triggered

<3>[ 1500.080269] [cyasdevice.c] cyasdevice_leave_standby end mode  count=8

<3>[ 1500.095953] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1500.096035] cyasblkdev_stop_sdcard : cy_as_storage_stop is called - found

<3>[ 1500.096206] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1500.529448] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1500.529533] cyasblkdev_start_sdcard : cy_as_storage_start is called

<3>[ 1500.529713] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1500.529795] cyasblkdev_start_sdcard : cy_as_storage_query_media is called - media count = 1

<3>[ 1500.529997] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1500.530097] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1500.530177] cyasblkdev_start_sdcard : cy_as_storage_query_device is called - found

<6>[ 1500.530647] PM: resume of devices complete after 673.887 msecs

<4>[ 1500.531648] Restarting tasks ...

<6>[ 1500.548927] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1500.548966] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(12 s)

<6>[ 1500.549015] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1500.549570] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=815

<6>[ 1500.550385] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1500.550454] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1500.550504] sec-battery sec-battery: soc(84), vfocv(4026), vcell(3999), temp(34), charging(2), health(1), chg_adc(0)

<4>[ 1500.552528] done.

<6>[ 1500.553177] exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0

<6>[ 1500.553227] suspend: exit suspend, ret = 0 (2012-08-03 16:26:03.532695291 UTC)

<3>[ 1500.553328] [cyasdevice.c] cy_wq_function:					leave standby

<3>[ 1500.553363] ++++++++++++  [cyasdevice.c] cy_wq_function: SD card is inserted.

<3>[ 1500.553559] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1500.560289] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1500.560376] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1500.560462] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1500.560536] cyasblkdev_check_sdcard : serial num = 0x7b 0xc4 0x42 0x95

<6>[ 1500.563269] request_suspend_state: wakeup (3->0) at 1500563038530 (2012-08-03 16:26:03.542728249 UTC)

<6>[ 1500.589475] mmc2: cmd 8 command timeout error

<4>[ 1500.589858] mmc2: card claims to support voltages below the defined range. These will be ignored.

<6>[ 1500.632134] mmc2: new high speed SDIO card at address 0001

<3>[ 1500.820025] [TSP] Calibration!!!!!!

<3>[ 1500.823192] [TSP] ta_status is 0

<3>[ 1500.823216] [TSP] mxt224_ta_probe

<3>[ 1500.830296] [TSP] Calibration End!!!!!!

<3>[ 1500.841927] [TSP]TA_probe MXT224E T48 Byte2 is 66

<3>[ 1500.855353] [TSP]TA_probe MXT224E T48 Byte2 is 98

<3>[ 1500.855689] [TSP] calibration success!!!

<6>[ 1500.856098] +s3cfb_late_resume

<7>[ 1500.856119] s3cfb - enable power domain

<6>[ 1500.856277] s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff

<7>[ 1500.856327] FIMD src sclk = 50000000

<6>[ 1500.856354] s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2

<6>[ 1500.856425] mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI

<6>[ 1500.856540] -s3cfb_late_resume

<6>[ 1500.856563] lcd panel: +ld9040_late_resume

<6>[ 1500.856590] lcd panel: ld9040_power_on

<3>[ 1500.887289] [TSP] Calibration!!!!!!

<3>[ 1500.899231] [TSP] Calibration End!!!!!!

<6>[ 1501.088197] lcd panel: id=0 brightness=24, bl=0, candela=30

<6>[ 1501.088282] lcd panel: -ld9040_late_resume

<6>[ 1501.088349] mdnie mdnie: +mdnie_late_resume

<6>[ 1501.088408] mdnie mdnie: -mdnie_late_resume

<7>[ 1501.088507] [TouchKey] sec_touchkey_late_resume

<6>[ 1501.089171] s5p_gpioint_set_type irq:389 is at GPL0(5)

<6>[ 1501.161331] lcd panel: id=0 brightness=32, bl=1, candela=40

<7>[ 1501.196359] [TouchKey] touchkey_autocalibration : data[0]=8 data[1]=e data[2]=8 data[3]=0

<7>[ 1501.301724] [Touchkey] autocal disabled, retry 0

<7>[ 1501.302741] [TouchKey] touchkey_autocalibration : data[0]=50 data[1]=e data[2]=8 data[3]=1

<7>[ 1501.406702] [Touchkey] autocal Enabled

<6>[ 1501.532658] lcd panel: id=0 brightness=72, bl=2, candela=70

<3>[ 1501.560395] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1501.560471] [cyasdevice.c] cyasdevice_enter_standby  end mode

<6>[ 1501.635344] cpu1 turning on!

<4>[ 1501.657875] CPU1: Booted secondary processor

<6>[ 1501.659817] cpu1 on

<6>[ 1501.660270] Switched to NOHz mode on CPU #1

<6>[ 1501.714503] lcd panel: id=0 brightness=91, bl=3, candela=90

<6>[ 1501.800869] lcd panel: id=0 brightness=100, bl=4, candela=100

<6>[ 1503.655547] cpu1 turnning off!

<4>[ 1503.657534] IRQ112 no longer affine to CPU1

<5>[ 1503.658717] CPU1: shutdown

<6>[ 1503.662336] cpu1 off!

<6>[ 1509.925915] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1509.930682] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1509.930809] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(21 s)

<6>[ 1509.930984] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1509.932859] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=814

<6>[ 1509.933337] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1509.933577] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1509.933753] sec-battery sec-battery: soc(84), vfocv(4025), vcell(4001), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1510.583734] request_suspend_state: sleep (0->3) at 1510583449286 (2012-08-03 16:26:13.563130380 UTC)

<7>[ 1510.584041] [TouchKey] sec_touchkey_early_suspend

<6>[ 1511.087769] lcd panel: id=0 brightness=0, bl=0, candela=30

<6>[ 1511.102102] lcd panel: +ld9040_early_suspend

<6>[ 1511.102208] lcd panel: ld9040_power_off

<6>[ 1511.431389] lcd panel: -ld9040_early_suspend

<6>[ 1511.431499] +s3cfb_early_suspend

<7>[ 1511.435335] s3cfb - disable power domain

<6>[ 1511.435446] -s3cfb_early_suspend

<6>[ 1511.563305] suspend: enter suspend

<6>[ 1511.563424] suspend: enter suspend, (2012-08-03 16:26:14.000000000 UTC)

<6>[ 1511.563557] PM: Syncing filesystems ... done.

<6>[ 1511.583780] exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0

<4>[ 1511.583819] Freezing user space processes ... (elapsed 0.02 seconds) done.

<4>[ 1511.605447] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

<4>[ 1511.620400] Suspending console(s) (use no_console_suspend to debug)

<6>[ 1511.670617] max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2012-08-03 16:28:04

<6>[ 1511.962314] IDPRAM : <dpram_power_down:3431> Received MBX_CMD_DPRAM_DOWN (lock count = 0)!!!

<6>[ 1511.962380] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 0

<6>[ 1511.963035] wake enabled for irq 359

<6>[ 1511.963301] USB3803 suspended

<6>[ 1511.963471] sec_jack_suspend: enable_irq_wake(0)

<7>[ 1511.963606] usb: android_work config=  (null),connected=0,sw_connected=0

<6>[ 1511.963644] android_work: did not send uevent (0 0   (null))

<6>[ 1511.964127] exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.

<6>[ 1511.970284] s5p_int_src_ext_hpd()

<6>[ 1511.970437] wake enabled for irq 375

<6>[ 1511.970460] wake enabled for irq 381

<6>[ 1511.970691] mmc2: card 0001 removed

<6>[ 1511.970866] sdhci_suspend_host : Enter WIFI suspend

<6>[ 1511.970932] u1_enable_regulator_for_usb_mipi: disable LDOs

<6>[ 1512.015736] PM: suspend of devices complete after 393.417 msecs

<4>[ 1512.020583] suspend_set_state: LED_A_2.8V: No configuration

<6>[ 1512.025148] power_suspend_late return 0

<6>[ 1512.025180] PM: late suspend of devices complete after 1.536 msecs

<4>[ 1512.025213] Disabling non-boot CPUs ...

<1>[ 1512.025678] PM: SLEEP

<6>[ 2199.000680] WAKEUP_STAT: 0x80000001

<6>[ 2199.000680] WAKEUP_INTx_PEND: 0x0, 0x1, 0x0, 0x0

<6>[ 1512.026811] PM: early resume of devices complete after 1.261 msecs

<6>[ 1512.027054] wakeup wake lock: DPRAM_PWDOWN

<6>[ 1512.027328] exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.

<6>[ 1512.027599] mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########

<6>[ 1512.027993] u1_enable_regulator_for_usb_mipi: enable LDOs

<6>[ 1512.030459] wake disabled for irq 375

<6>[ 1512.030485] wake disabled for irq 381

<6>[ 1512.030579] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

<4>[ 1512.031649] usb usb1: root hub lost power or was reset

<6>[ 1512.055356] sec_jack_resume: disable_irq_wake(0)

<6>[ 1512.055568] USB3803 resumed to mode standby

<6>[ 1512.056795] wake disabled for irq 359

<6>[ 1512.060094] IDPRAM : <dpram_power_up:3468> dpram_wakeup_init() ==> QSC_INT = HIGH

<6>[ 1512.060420] IDPRAM : <dpram_powerup_start:3440> Received MBX_CMD_CP_WAKEUP_START!!!

<3>[ 1512.235653] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1512.240754] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1512.240840] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<1>[ 1512.240905] _cy_as_device: cy_as_event_misc_awake event callback triggered

<3>[ 1512.250280] [cyasdevice.c] cyasdevice_leave_standby end mode  count=8

<3>[ 1512.265965] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1512.266046] cyasblkdev_stop_sdcard : cy_as_storage_stop is called - found

<3>[ 1512.266217] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1512.699460] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1512.699545] cyasblkdev_start_sdcard : cy_as_storage_start is called

<3>[ 1512.699725] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1512.699807] cyasblkdev_start_sdcard : cy_as_storage_query_media is called - media count = 1

<3>[ 1512.700009] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1512.700106] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1512.700187] cyasblkdev_start_sdcard : cy_as_storage_query_device is called - found

<6>[ 1512.700652] PM: resume of devices complete after 673.486 msecs

<4>[ 1512.701665] Restarting tasks ...

<6>[ 1512.718704] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1512.718746] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1512.720103] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1512.720138] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1512.720734] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=818

<6>[ 1512.721551] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1512.721620] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1512.721670] sec-battery sec-battery: soc(84), vfocv(4025), vcell(3981), temp(34), charging(2), health(1), chg_adc(0)

<4>[ 1512.723385] done.

<6>[ 1512.724024] exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0

<6>[ 1512.724073] suspend: exit suspend, ret = 0 (2012-08-03 16:26:19.533549750 UTC)

<3>[ 1512.724173] [cyasdevice.c] cy_wq_function:					leave standby

<3>[ 1512.724207] ++++++++++++  [cyasdevice.c] cy_wq_function: SD card is inserted.

<3>[ 1512.724403] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1512.730302] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1512.730383] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1512.730462] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1512.730534] cyasblkdev_check_sdcard : serial num = 0x7b 0xc4 0x42 0x95

<6>[ 1512.740013] request_suspend_state: wakeup (3->0) at 1512739770370 (2012-08-03 16:26:19.549480458 UTC)

<6>[ 1512.754426] mmc2: cmd 8 command timeout error

<4>[ 1512.761138] mmc2: card claims to support voltages below the defined range. These will be ignored.

<6>[ 1512.803007] mmc2: new high speed SDIO card at address 0001

<3>[ 1512.984162] [TSP] Calibration!!!!!!

<3>[ 1512.990336] [TSP] Calibration End!!!!!!

<3>[ 1512.993655] [TSP] ta_status is 0

<3>[ 1512.993675] [TSP] mxt224_ta_probe

<3>[ 1513.010337] [TSP]TA_probe MXT224E T48 Byte2 is 66

<3>[ 1513.015276] [TSP]TA_probe MXT224E T48 Byte2 is 98

<3>[ 1513.015468] [TSP] calibration success!!!

<6>[ 1513.015862] +s3cfb_late_resume

<7>[ 1513.015879] s3cfb - enable power domain

<6>[ 1513.015996] s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff

<7>[ 1513.016033] FIMD src sclk = 50000000

<6>[ 1513.016055] s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2

<6>[ 1513.016110] mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI

<6>[ 1513.016196] -s3cfb_late_resume

<6>[ 1513.016214] lcd panel: +ld9040_late_resume

<6>[ 1513.016235] lcd panel: ld9040_power_on

<3>[ 1513.065107] [TSP] Calibration!!!!!!

<3>[ 1513.076182] [TSP] Calibration End!!!!!!

<6>[ 1513.247763] lcd panel: id=0 brightness=31, bl=1, candela=40

<6>[ 1513.247804] lcd panel: -ld9040_late_resume

<6>[ 1513.247837] mdnie mdnie: +mdnie_late_resume

<6>[ 1513.247864] mdnie mdnie: -mdnie_late_resume

<7>[ 1513.247912] [TouchKey] sec_touchkey_late_resume

<6>[ 1513.248415] s5p_gpioint_set_type irq:389 is at GPL0(5)

<7>[ 1513.355875] [TouchKey] touchkey_autocalibration : data[0]=8 data[1]=e data[2]=8 data[3]=0

<7>[ 1513.461140] [Touchkey] autocal disabled, retry 0

<7>[ 1513.461762] [TouchKey] touchkey_autocalibration : data[0]=50 data[1]=e data[2]=8 data[3]=1

<7>[ 1513.566129] [Touchkey] autocal Enabled

<6>[ 1513.605409] lcd panel: id=0 brightness=70, bl=2, candela=70

<6>[ 1513.660379] cpu1 turning on!

<4>[ 1513.684399] CPU1: Booted secondary processor

<6>[ 1513.685190] cpu1 on

<6>[ 1513.685268] Switched to NOHz mode on CPU #1

<3>[ 1513.730427] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1513.730499] [cyasdevice.c] cyasdevice_enter_standby  end mode

<6>[ 1513.802557] lcd panel: id=0 brightness=91, bl=3, candela=90

<6>[ 1513.893128] lcd panel: id=0 brightness=101, bl=4, candela=100

<6>[ 1515.680795] cpu1 turnning off!

<4>[ 1515.682835] IRQ112 no longer affine to CPU1

<5>[ 1515.683979] CPU1: shutdown

<6>[ 1515.686887] cpu1 off!

<6>[ 1516.447096] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1516.447244] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1517.474553] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1517.474698] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1520.927907] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1520.928053] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1522.055818] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1522.056405] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1522.056531] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(1 s)

<6>[ 1522.056705] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1522.057687] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=816

<6>[ 1522.058129] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1522.058369] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1522.058548] sec-battery sec-battery: soc(84), vfocv(4025), vcell(3981), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1522.089234] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1522.089379] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1522.770934] request_suspend_state: sleep (0->3) at 1522770637750 (2012-08-03 16:26:29.580338672 UTC)

<7>[ 1522.771275] [TouchKey] sec_touchkey_early_suspend

<6>[ 1523.282347] lcd panel: +ld9040_early_suspend

<6>[ 1523.282454] lcd panel: ld9040_power_off

<6>[ 1523.596843] lcd panel: -ld9040_early_suspend

<6>[ 1523.596952] +s3cfb_early_suspend

<7>[ 1523.629399] s3cfb - disable power domain

<6>[ 1523.629516] -s3cfb_early_suspend

<6>[ 1523.735751] suspend: enter suspend

<6>[ 1523.735786] suspend: enter suspend, (2012-08-03 16:26:30.000000000 UTC)

<6>[ 1523.735825] PM: Syncing filesystems ... done.

<6>[ 1523.749431] exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0

<4>[ 1523.749471] Freezing user space processes ... (elapsed 0.02 seconds) done.

<4>[ 1523.770465] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

<4>[ 1523.785415] Suspending console(s) (use no_console_suspend to debug)

<6>[ 1523.835638] max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2012-08-03 16:28:05

<6>[ 1524.146770] IDPRAM : <dpram_power_down:3431> Received MBX_CMD_DPRAM_DOWN (lock count = 0)!!!

<6>[ 1524.146842] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 0

<6>[ 1524.147509] wake enabled for irq 359

<6>[ 1524.147780] USB3803 suspended

<6>[ 1524.147952] sec_jack_suspend: enable_irq_wake(0)

<7>[ 1524.148088] usb: android_work config=  (null),connected=0,sw_connected=0

<6>[ 1524.148127] android_work: did not send uevent (0 0   (null))

<6>[ 1524.148615] exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.

<6>[ 1524.155303] s5p_int_src_ext_hpd()

<6>[ 1524.155457] wake enabled for irq 375

<6>[ 1524.155481] wake enabled for irq 381

<6>[ 1524.155719] mmc2: card 0001 removed

<6>[ 1524.155895] sdhci_suspend_host : Enter WIFI suspend

<6>[ 1524.155964] u1_enable_regulator_for_usb_mipi: disable LDOs

<6>[ 1524.200225] PM: suspend of devices complete after 412.872 msecs

<4>[ 1524.205214] suspend_set_state: LED_A_2.8V: No configuration

<6>[ 1524.209798] power_suspend_late return 0

<6>[ 1524.209832] PM: late suspend of devices complete after 1.547 msecs

<4>[ 1524.209867] Disabling non-boot CPUs ...

<1>[ 1524.210296] PM: SLEEP

<6>[ 2199.000680] WAKEUP_STAT: 0x80000001

<6>[ 2199.000680] WAKEUP_INTx_PEND: 0x0, 0x1, 0x0, 0x0

<6>[ 1524.211475] PM: early resume of devices complete after 1.300 msecs

<6>[ 1524.211715] wakeup wake lock: DPRAM_PWDOWN

<6>[ 1524.211989] exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.

<6>[ 1524.212260] mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########

<6>[ 1524.212655] u1_enable_regulator_for_usb_mipi: enable LDOs

<6>[ 1524.215126] wake disabled for irq 375

<6>[ 1524.215152] wake disabled for irq 381

<6>[ 1524.215245] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

<4>[ 1524.216341] usb usb1: root hub lost power or was reset

<6>[ 1524.240368] sec_jack_resume: disable_irq_wake(0)

<6>[ 1524.240580] USB3803 resumed to mode standby

<6>[ 1524.241808] wake disabled for irq 359

<6>[ 1524.245190] IDPRAM : <dpram_power_up:3468> dpram_wakeup_init() ==> QSC_INT = HIGH

<6>[ 1524.245603] IDPRAM : <dpram_powerup_start:3440> Received MBX_CMD_CP_WAKEUP_START!!!

<3>[ 1524.420665] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1524.425770] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1524.425857] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<1>[ 1524.425925] _cy_as_device: cy_as_event_misc_awake event callback triggered

<3>[ 1524.435293] [cyasdevice.c] cyasdevice_leave_standby end mode  count=8

<3>[ 1524.450978] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1524.451060] cyasblkdev_stop_sdcard : cy_as_storage_stop is called - found

<3>[ 1524.451230] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1524.884507] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1524.884591] cyasblkdev_start_sdcard : cy_as_storage_start is called

<3>[ 1524.884772] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1524.884855] cyasblkdev_start_sdcard : cy_as_storage_query_media is called - media count = 1

<3>[ 1524.885056] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1524.885155] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1524.885235] cyasblkdev_start_sdcard : cy_as_storage_query_device is called - found

<6>[ 1524.885703] PM: resume of devices complete after 673.877 msecs

<4>[ 1524.886710] Restarting tasks ...

<6>[ 1524.903787] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1524.903824] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1524.904381] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=816

<6>[ 1524.905165] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1524.905235] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1524.905323] sec-battery sec-battery: soc(84), vfocv(4024), vcell(3961), temp(34), charging(2), health(1), chg_adc(0)

<4>[ 1524.907230] done.

<6>[ 1524.907880] exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0

<6>[ 1524.907930] suspend: exit suspend, ret = 0 (2012-08-03 16:26:32.532394501 UTC)

<3>[ 1524.908030] [cyasdevice.c] cy_wq_function:					leave standby

<3>[ 1524.908065] ++++++++++++  [cyasdevice.c] cy_wq_function: SD card is inserted.

<3>[ 1524.908259] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1524.915312] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1524.915397] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1524.915480] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1524.915554] cyasblkdev_check_sdcard : serial num = 0x7b 0xc4 0x42 0x95

<6>[ 1524.917038] request_suspend_state: wakeup (3->0) at 1524916785070 (2012-08-03 16:26:32.541494667 UTC)

<6>[ 1524.939584] mmc2: cmd 8 command timeout error

<4>[ 1524.939939] mmc2: card claims to support voltages below the defined range. These will be ignored.

<6>[ 1524.982691] mmc2: new high speed SDIO card at address 0001

<3>[ 1525.175341] [TSP] Calibration!!!!!!

<3>[ 1525.175393] [TSP] ta_status is 0

<3>[ 1525.175416] [TSP] mxt224_ta_probe

<3>[ 1525.185323] [TSP] Calibration End!!!!!!

<3>[ 1525.205322] [TSP]TA_probe MXT224E T48 Byte2 is 66

<3>[ 1525.220359] [TSP]TA_probe MXT224E T48 Byte2 is 98

<3>[ 1525.220697] [TSP] calibration success!!!

<6>[ 1525.221109] +s3cfb_late_resume

<7>[ 1525.221130] s3cfb - enable power domain

<6>[ 1525.221275] s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff

<7>[ 1525.221324] FIMD src sclk = 50000000

<6>[ 1525.221351] s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2

<6>[ 1525.221422] mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI

<6>[ 1525.221533] -s3cfb_late_resume

<6>[ 1525.221557] lcd panel: +ld9040_late_resume

<6>[ 1525.221583] lcd panel: ld9040_power_on

<3>[ 1525.241067] [TSP] Calibration!!!!!!

<3>[ 1525.253074] [TSP] Calibration End!!!!!!

<6>[ 1525.451505] lcd panel: id=0 brightness=19, bl=0, candela=30

<6>[ 1525.451590] lcd panel: -ld9040_late_resume

<6>[ 1525.451660] mdnie mdnie: +mdnie_late_resume

<6>[ 1525.451721] mdnie mdnie: -mdnie_late_resume

<7>[ 1525.451817] [TouchKey] sec_touchkey_late_resume

<6>[ 1525.453116] s5p_gpioint_set_type irq:389 is at GPL0(5)

<6>[ 1525.553806] lcd panel: id=0 brightness=30, bl=1, candela=40

<7>[ 1525.561685] [TouchKey] touchkey_autocalibration : data[0]=8 data[1]=e data[2]=8 data[3]=0

<7>[ 1525.666738] [Touchkey] autocal disabled, retry 0

<7>[ 1525.667750] [TouchKey] touchkey_autocalibration : data[0]=50 data[1]=e data[2]=8 data[3]=1

<7>[ 1525.771693] [Touchkey] autocal Enabled

<3>[ 1525.915488] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1525.915602] [cyasdevice.c] cyasdevice_enter_standby  end mode

<6>[ 1525.924546] lcd panel: id=0 brightness=70, bl=2, candela=70

<6>[ 1526.127056] lcd panel: id=0 brightness=92, bl=3, candela=90

<6>[ 1526.195358] cpu1 turning on!

<6>[ 1526.217368] lcd panel: id=0 brightness=101, bl=4, candela=100

<4>[ 1526.219400] CPU1: Booted secondary processor

<6>[ 1526.220282] Switched to NOHz mode on CPU #1

<6>[ 1526.221453] cpu1 on

<6>[ 1528.220878] cpu1 turnning off!

<4>[ 1528.222917] IRQ112 no longer affine to CPU1

<5>[ 1528.224212] CPU1: shutdown

<6>[ 1528.226944] cpu1 off!

<6>[ 1533.996052] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1533.996199] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1534.405971] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1534.410771] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1534.410896] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(0 s)

<6>[ 1534.411071] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1534.412951] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=811

<6>[ 1534.413410] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1534.413648] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1534.413827] sec-battery sec-battery: soc(84), vfocv(4023), vcell(3992), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1534.933087] request_suspend_state: sleep (0->3) at 1534932779408 (2012-08-03 16:26:42.557479797 UTC)

<7>[ 1534.933398] [TouchKey] sec_touchkey_early_suspend

<6>[ 1535.434018] lcd panel: id=0 brightness=0, bl=0, candela=30

<6>[ 1535.436421] lcd panel: +ld9040_early_suspend

<6>[ 1535.436523] lcd panel: ld9040_power_off

<6>[ 1535.756804] lcd panel: -ld9040_early_suspend

<6>[ 1535.756913] +s3cfb_early_suspend

<7>[ 1535.766774] s3cfb - disable power domain

<6>[ 1535.766885] -s3cfb_early_suspend

<6>[ 1535.877138] suspend: enter suspend

<6>[ 1535.877205] suspend: enter suspend, (2012-08-03 16:26:43.000000000 UTC)

<6>[ 1535.877287] PM: Syncing filesystems ... done.

<6>[ 1535.892317] exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0

<4>[ 1535.892358] Freezing user space processes ... (elapsed 0.01 seconds) done.

<4>[ 1535.910453] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

<4>[ 1535.925427] Suspending console(s) (use no_console_suspend to debug)

<6>[ 1535.975616] max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2012-08-03 16:28:04

<6>[ 1536.267189] IDPRAM : <dpram_power_down:3431> Received MBX_CMD_DPRAM_DOWN (lock count = 0)!!!

<6>[ 1536.267260] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 0

<6>[ 1536.267923] wake enabled for irq 359

<6>[ 1536.268195] USB3803 suspended

<6>[ 1536.268367] sec_jack_suspend: enable_irq_wake(0)

<7>[ 1536.268505] usb: android_work config=  (null),connected=0,sw_connected=0

<6>[ 1536.268544] android_work: did not send uevent (0 0   (null))

<6>[ 1536.269031] exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.

<6>[ 1536.275293] s5p_int_src_ext_hpd()

<6>[ 1536.275445] wake enabled for irq 375

<6>[ 1536.275469] wake enabled for irq 381

<6>[ 1536.275710] mmc2: card 0001 removed

<6>[ 1536.275885] sdhci_suspend_host : Enter WIFI suspend

<6>[ 1536.275954] u1_enable_regulator_for_usb_mipi: disable LDOs

<6>[ 1536.320615] PM: suspend of devices complete after 393.256 msecs

<4>[ 1536.325617] suspend_set_state: LED_A_2.8V: No configuration

<6>[ 1536.330205] power_suspend_late return 0

<6>[ 1536.330238] PM: late suspend of devices complete after 1.552 msecs

<4>[ 1536.330340] Disabling non-boot CPUs ...

<1>[ 1536.330782] PM: SLEEP

<6>[ 2199.000680] WAKEUP_STAT: 0x80000001

<6>[ 2199.000680] WAKEUP_INTx_PEND: 0x0, 0x1, 0x0, 0x0

<6>[ 1536.331914] PM: early resume of devices complete after 1.261 msecs

<6>[ 1536.332157] wakeup wake lock: DPRAM_PWDOWN

<6>[ 1536.332433] exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.

<6>[ 1536.332705] mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########

<6>[ 1536.333100] u1_enable_regulator_for_usb_mipi: enable LDOs

<6>[ 1536.335583] wake disabled for irq 375

<6>[ 1536.335609] wake disabled for irq 381

<6>[ 1536.335703] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

<4>[ 1536.336773] usb usb1: root hub lost power or was reset

<6>[ 1536.360379] sec_jack_resume: disable_irq_wake(0)

<6>[ 1536.360592] USB3803 resumed to mode standby

<6>[ 1536.361819] wake disabled for irq 359

<6>[ 1536.365203] IDPRAM : <dpram_power_up:3468> dpram_wakeup_init() ==> QSC_INT = HIGH

<6>[ 1536.365555] IDPRAM : <dpram_powerup_start:3440> Received MBX_CMD_CP_WAKEUP_START!!!

<3>[ 1536.540677] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1536.545780] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1536.545868] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<1>[ 1536.545935] _cy_as_device: cy_as_event_misc_awake event callback triggered

<3>[ 1536.555305] [cyasdevice.c] cyasdevice_leave_standby end mode  count=8

<3>[ 1536.570989] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1536.571072] cyasblkdev_stop_sdcard : cy_as_storage_stop is called - found

<3>[ 1536.571241] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1537.004484] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1537.004570] cyasblkdev_start_sdcard : cy_as_storage_start is called

<3>[ 1537.004749] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1537.004832] cyasblkdev_start_sdcard : cy_as_storage_query_media is called - media count = 1

<3>[ 1537.005033] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1537.005132] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1537.005213] cyasblkdev_start_sdcard : cy_as_storage_query_device is called - found

<6>[ 1537.005686] PM: resume of devices complete after 673.417 msecs

<4>[ 1537.006697] Restarting tasks ...

<6>[ 1537.024577] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1537.024617] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(3 s)

<6>[ 1537.024666] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1537.025221] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=808

<6>[ 1537.026128] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1537.026198] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1537.026247] sec-battery sec-battery: soc(84), vfocv(4023), vcell(3955), temp(34), charging(2), health(1), chg_adc(0)

<4>[ 1537.027759] done.

<6>[ 1537.028406] exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0

<6>[ 1537.028455] suspend: exit suspend, ret = 0 (2012-08-03 16:26:55.532905251 UTC)

<3>[ 1537.028555] [cyasdevice.c] cy_wq_function:					leave standby

<3>[ 1537.028590] ++++++++++++  [cyasdevice.c] cy_wq_function: SD card is inserted.

<3>[ 1537.028786] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1537.035327] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1537.035412] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1537.035496] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1537.035570] cyasblkdev_check_sdcard : serial num = 0x7b 0xc4 0x42 0x95

<6>[ 1537.037674] request_suspend_state: wakeup (3->0) at 1537037410738 (2012-08-03 16:26:55.542117501 UTC)

<6>[ 1537.060054] mmc2: cmd 8 command timeout error

<4>[ 1537.065354] mmc2: card claims to support voltages below the defined range. These will be ignored.

<6>[ 1537.084257] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1537.084356] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1537.112726] mmc2: new high speed SDIO card at address 0001

<3>[ 1537.307524] [TSP] Calibration!!!!!!

<3>[ 1537.307563] [TSP] ta_status is 0

<3>[ 1537.307581] [TSP] mxt224_ta_probe

<3>[ 1537.315336] [TSP] Calibration End!!!!!!

<3>[ 1537.325323] [TSP]TA_probe MXT224E T48 Byte2 is 66

<3>[ 1537.340334] [TSP]TA_probe MXT224E T48 Byte2 is 98

<3>[ 1537.340659] [TSP] calibration success!!!

<6>[ 1537.341065] +s3cfb_late_resume

<7>[ 1537.341081] s3cfb - enable power domain

<6>[ 1537.341196] s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff

<7>[ 1537.341233] FIMD src sclk = 50000000

<6>[ 1537.341255] s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2

<6>[ 1537.341309] mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI

<6>[ 1537.341394] -s3cfb_late_resume

<6>[ 1537.341412] lcd panel: +ld9040_late_resume

<6>[ 1537.341433] lcd panel: ld9040_power_on

<3>[ 1537.361660] [TSP] Calibration!!!!!!

<3>[ 1537.373690] [TSP] Calibration End!!!!!!

<6>[ 1537.579870] lcd panel: id=0 brightness=24, bl=0, candela=30

<6>[ 1537.579998] lcd panel: -ld9040_late_resume

<6>[ 1537.580098] mdnie mdnie: +mdnie_late_resume

<6>[ 1537.580188] mdnie mdnie: -mdnie_late_resume

<7>[ 1537.580423] [TouchKey] sec_touchkey_late_resume

<6>[ 1537.583720] s5p_gpioint_set_type irq:389 is at GPL0(5)

<6>[ 1537.631730] lcd panel: id=0 brightness=30, bl=1, candela=40

<7>[ 1537.691422] [TouchKey] touchkey_autocalibration : data[0]=8 data[1]=e data[2]=8 data[3]=0

<7>[ 1537.796778] [Touchkey] autocal disabled, retry 0

<7>[ 1537.797796] [TouchKey] touchkey_autocalibration : data[0]=50 data[1]=e data[2]=8 data[3]=1

<7>[ 1537.901761] [Touchkey] autocal Enabled

<6>[ 1538.003145] lcd panel: id=0 brightness=70, bl=2, candela=70

<3>[ 1538.035463] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1538.035578] [cyasdevice.c] cyasdevice_enter_standby  end mode

<6>[ 1538.196504] lcd panel: id=0 brightness=91, bl=3, candela=90

<6>[ 1538.225379] cpu1 turning on!

<4>[ 1538.246638] CPU1: Booted secondary processor

<6>[ 1538.247584] cpu1 on

<6>[ 1538.250288] Switched to NOHz mode on CPU #1

<6>[ 1538.298174] lcd panel: id=0 brightness=101, bl=4, candela=100

<6>[ 1540.245549] cpu1 turnning off!

<4>[ 1540.252599] IRQ112 no longer affine to CPU1

<5>[ 1540.253873] CPU1: shutdown

<6>[ 1540.258015] cpu1 off!

<6>[ 1540.696576] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1540.696723] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1546.365822] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1546.366397] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1546.366524] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(5 s)

<6>[ 1546.366696] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1546.367679] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=800

<6>[ 1546.368302] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1546.368541] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1546.368718] sec-battery sec-battery: soc(84), vfocv(4023), vcell(3955), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1546.438517] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1546.438660] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1547.073325] request_suspend_state: sleep (0->3) at 1547073004075 (2012-08-03 16:27:05.577701922 UTC)

<7>[ 1547.073699] [TouchKey] sec_touchkey_early_suspend

<6>[ 1547.570431] lcd panel: id=0 brightness=0, bl=0, candela=30

<6>[ 1547.582081] lcd panel: +ld9040_early_suspend

<6>[ 1547.582185] lcd panel: ld9040_power_off

<6>[ 1547.901919] lcd panel: -ld9040_early_suspend

<6>[ 1547.902029] +s3cfb_early_suspend

<7>[ 1547.903400] s3cfb - disable power domain

<6>[ 1547.903508] -s3cfb_early_suspend

<6>[ 1548.007440] suspend: enter suspend

<6>[ 1548.007532] suspend: enter suspend, (2012-08-03 16:27:06.000000000 UTC)

<6>[ 1548.007621] PM: Syncing filesystems ... done.

<6>[ 1548.042746] exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0

<4>[ 1548.042786] Freezing user space processes ... (elapsed 0.02 seconds) done.

<4>[ 1548.065479] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

<4>[ 1548.080480] Suspending console(s) (use no_console_suspend to debug)

<6>[ 1548.130617] max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2012-08-03 16:28:05

<6>[ 1548.442054] IDPRAM : <dpram_power_down:3431> Received MBX_CMD_DPRAM_DOWN (lock count = 0)!!!

<6>[ 1548.442125] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 0

<6>[ 1548.442790] wake enabled for irq 359

<6>[ 1548.443064] USB3803 suspended

<6>[ 1548.443236] sec_jack_suspend: enable_irq_wake(0)

<7>[ 1548.443372] usb: android_work config=  (null),connected=0,sw_connected=0

<6>[ 1548.443411] android_work: did not send uevent (0 0   (null))

<6>[ 1548.443901] exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.

<6>[ 1548.450317] s5p_int_src_ext_hpd()

<6>[ 1548.450471] wake enabled for irq 375

<6>[ 1548.450495] wake enabled for irq 381

<6>[ 1548.450736] mmc2: card 0001 removed

<6>[ 1548.450914] sdhci_suspend_host : Enter WIFI suspend

<6>[ 1548.450985] u1_enable_regulator_for_usb_mipi: disable LDOs

<6>[ 1548.495505] PM: suspend of devices complete after 413.086 msecs

<4>[ 1548.500508] suspend_set_state: LED_A_2.8V: No configuration

<6>[ 1548.505087] power_suspend_late return 0

<6>[ 1548.505122] PM: late suspend of devices complete after 1.545 msecs

<4>[ 1548.505157] Disabling non-boot CPUs ...

<1>[ 1548.505595] PM: SLEEP

<6>[ 2199.000680] WAKEUP_STAT: 0x80000001

<6>[ 2199.000680] WAKEUP_INTx_PEND: 0x0, 0x1, 0x0, 0x0

<6>[ 1548.506783] PM: early resume of devices complete after 1.261 msecs

<6>[ 1548.507023] wakeup wake lock: DPRAM_PWDOWN

<6>[ 1548.507296] exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.

<6>[ 1548.507573] mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########

<6>[ 1548.507968] u1_enable_regulator_for_usb_mipi: enable LDOs

<6>[ 1548.510432] wake disabled for irq 375

<6>[ 1548.510458] wake disabled for irq 381

<6>[ 1548.510555] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

<4>[ 1548.511631] usb usb1: root hub lost power or was reset

<6>[ 1548.535390] sec_jack_resume: disable_irq_wake(0)

<6>[ 1548.535601] USB3803 resumed to mode standby

<6>[ 1548.536832] wake disabled for irq 359

<6>[ 1548.540134] IDPRAM : <dpram_power_up:3468> dpram_wakeup_init() ==> QSC_INT = HIGH

<6>[ 1548.540463] IDPRAM : <dpram_powerup_start:3440> Received MBX_CMD_CP_WAKEUP_START!!!

<3>[ 1548.715687] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1548.720794] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1548.720898] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<1>[ 1548.720976] _cy_as_device: cy_as_event_misc_awake event callback triggered

<3>[ 1548.730315] [cyasdevice.c] cyasdevice_leave_standby end mode  count=8

<3>[ 1548.746000] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1548.746082] cyasblkdev_stop_sdcard : cy_as_storage_stop is called - found

<3>[ 1548.746252] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1549.179498] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1549.179584] cyasblkdev_start_sdcard : cy_as_storage_start is called

<3>[ 1549.179763] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1549.179849] cyasblkdev_start_sdcard : cy_as_storage_query_media is called - media count = 1

<3>[ 1549.180053] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1549.180151] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1549.180236] cyasblkdev_start_sdcard : cy_as_storage_query_device is called - found

<6>[ 1549.180716] PM: resume of devices complete after 673.582 msecs

<4>[ 1549.181729] Restarting tasks ...

<6>[ 1549.199380] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1549.199421] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1549.199978] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=799

<6>[ 1549.200807] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1549.200884] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1549.200934] sec-battery sec-battery: soc(84), vfocv(4021), vcell(3956), temp(34), charging(2), health(1), chg_adc(0)

<4>[ 1549.202716] done.

<6>[ 1549.203366] exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0

<6>[ 1549.203416] suspend: exit suspend, ret = 0 (2012-08-03 16:27:31.532858000 UTC)

<3>[ 1549.203518] [cyasdevice.c] cy_wq_function:					leave standby

<3>[ 1549.203557] ++++++++++++  [cyasdevice.c] cy_wq_function: SD card is inserted.

<3>[ 1549.203755] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1549.210336] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1549.210427] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1549.210515] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1549.210590] cyasblkdev_check_sdcard : serial num = 0x7b 0xc4 0x42 0x95

<6>[ 1549.212289] request_suspend_state: wakeup (3->0) at 1549212013365 (2012-08-03 16:27:31.541723875 UTC)

<6>[ 1549.234607] mmc2: cmd 8 command timeout error

<4>[ 1549.234973] mmc2: card claims to support voltages below the defined range. These will be ignored.

<6>[ 1549.277486] mmc2: new high speed SDIO card at address 0001

<3>[ 1549.458289] [TSP] ta_status is 0

<3>[ 1549.458787] [TSP] mxt224_ta_probe

<3>[ 1549.458902] [TSP] Calibration!!!!!!

<3>[ 1549.465361] [TSP] Calibration End!!!!!!

<3>[ 1549.485373] [TSP]TA_probe MXT224E T48 Byte2 is 66

<3>[ 1549.488996] [TSP]TA_probe MXT224E T48 Byte2 is 98

<3>[ 1549.489234] [TSP] calibration success!!!

<6>[ 1549.489681] +s3cfb_late_resume

<7>[ 1549.489707] s3cfb - enable power domain

<6>[ 1549.489862] s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff

<7>[ 1549.489924] FIMD src sclk = 50000000

<6>[ 1549.489956] s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2

<6>[ 1549.490030] mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI

<6>[ 1549.490152] -s3cfb_late_resume

<6>[ 1549.490183] lcd panel: +ld9040_late_resume

<6>[ 1549.490217] lcd panel: ld9040_power_on

<3>[ 1549.490393] [TSP] Calibration!!!!!!

<3>[ 1549.501552] [TSP] Calibration End!!!!!!

<6>[ 1549.720519] lcd panel: id=0 brightness=17, bl=0, candela=30

<6>[ 1549.720621] lcd panel: -ld9040_late_resume

<6>[ 1549.720699] mdnie mdnie: +mdnie_late_resume

<6>[ 1549.720759] mdnie mdnie: -mdnie_late_resume

<7>[ 1549.720852] [TouchKey] sec_touchkey_late_resume

<6>[ 1549.722298] s5p_gpioint_set_type irq:389 is at GPL0(5)

<7>[ 1549.831414] [TouchKey] touchkey_autocalibration : data[0]=8 data[1]=e data[2]=8 data[3]=0

<6>[ 1549.847048] lcd panel: id=0 brightness=32, bl=1, candela=40

<7>[ 1549.936244] [Touchkey] autocal disabled, retry 0

<7>[ 1549.936911] [TouchKey] touchkey_autocalibration : data[0]=50 data[1]=e data[2]=8 data[3]=1

<7>[ 1550.041143] [Touchkey] autocal Enabled

<6>[ 1550.201781] lcd panel: id=0 brightness=70, bl=2, candela=70

<3>[ 1550.210443] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1550.210524] [cyasdevice.c] cyasdevice_enter_standby  end mode

<6>[ 1550.255404] cpu1 turning on!

<4>[ 1550.278384] CPU1: Booted secondary processor

<6>[ 1550.279881] cpu1 on

<6>[ 1550.280312] Switched to NOHz mode on CPU #1

<6>[ 1550.392189] lcd panel: id=0 brightness=90, bl=3, candela=90

<6>[ 1550.497950] lcd panel: id=0 brightness=101, bl=4, candela=100

<6>[ 1551.724663] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1551.724812] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1552.275560] cpu1 turnning off!

<4>[ 1552.277497] IRQ112 no longer affine to CPU1

<5>[ 1552.278645] CPU1: shutdown

<6>[ 1552.282428] cpu1 off!

<6>[ 1558.556019] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1558.556610] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1558.556747] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(6 s)

<6>[ 1558.556972] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1558.557974] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=796

<6>[ 1558.558428] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1558.558666] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1558.558844] sec-battery sec-battery: soc(84), vfocv(4021), vcell(3956), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1559.235020] request_suspend_state: sleep (0->3) at 1559234697995 (2012-08-03 16:27:41.564398588 UTC)

<7>[ 1559.235410] [TouchKey] sec_touchkey_early_suspend

<6>[ 1559.726921] lcd panel: id=0 brightness=0, bl=0, candela=30

<6>[ 1559.741471] lcd panel: +ld9040_early_suspend

<6>[ 1559.741577] lcd panel: ld9040_power_off

<6>[ 1560.067314] lcd panel: -ld9040_early_suspend

<6>[ 1560.067424] +s3cfb_early_suspend

<7>[ 1560.068853] s3cfb - disable power domain

<6>[ 1560.068961] -s3cfb_early_suspend

<6>[ 1560.176666] suspend: enter suspend

<6>[ 1560.176732] suspend: enter suspend, (2012-08-03 16:27:42.000000000 UTC)

<6>[ 1560.176814] PM: Syncing filesystems ... done.

<6>[ 1560.191565] exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0

<4>[ 1560.191605] Freezing user space processes ... (elapsed 0.02 seconds) done.

<4>[ 1560.215486] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

<4>[ 1560.230443] Suspending console(s) (use no_console_suspend to debug)

<6>[ 1560.280684] max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2012-08-03 16:28:04

<6>[ 1560.571807] IDPRAM : <dpram_power_down:3431> Received MBX_CMD_DPRAM_DOWN (lock count = 0)!!!

<6>[ 1560.571878] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 0

<6>[ 1560.572534] wake enabled for irq 359

<6>[ 1560.572802] USB3803 suspended

<6>[ 1560.572972] sec_jack_suspend: enable_irq_wake(0)

<7>[ 1560.573105] usb: android_work config=  (null),connected=0,sw_connected=0

<6>[ 1560.573143] android_work: did not send uevent (0 0   (null))

<6>[ 1560.573626] exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.

<6>[ 1560.580329] s5p_int_src_ext_hpd()

<6>[ 1560.580480] wake enabled for irq 375

<6>[ 1560.580503] wake enabled for irq 381

<6>[ 1560.580737] mmc2: card 0001 removed

<6>[ 1560.580910] sdhci_suspend_host : Enter WIFI suspend

<6>[ 1560.580976] u1_enable_regulator_for_usb_mipi: disable LDOs

<6>[ 1560.625184] PM: suspend of devices complete after 392.813 msecs

<4>[ 1560.630172] suspend_set_state: LED_A_2.8V: No configuration

<6>[ 1560.634740] power_suspend_late return 0

<6>[ 1560.634772] PM: late suspend of devices complete after 1.534 msecs

<4>[ 1560.634806] Disabling non-boot CPUs ...

<1>[ 1560.635247] PM: SLEEP

<6>[ 2199.000680] WAKEUP_STAT: 0x80000001

<6>[ 2199.000680] WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0

<6>[ 1560.636419] PM: early resume of devices complete after 1.305 msecs

<6>[ 1560.636874] exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.

<6>[ 1560.637146] mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########

<6>[ 1560.637540] u1_enable_regulator_for_usb_mipi: enable LDOs

<6>[ 1560.640001] wake disabled for irq 375

<6>[ 1560.640026] wake disabled for irq 381

<6>[ 1560.640074] wakeup wake lock: event1-2067

<6>[ 1560.640152] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

<4>[ 1560.641251] usb usb1: root hub lost power or was reset

<6>[ 1560.665401] sec_jack_resume: disable_irq_wake(0)

<6>[ 1560.665613] USB3803 resumed to mode standby

<6>[ 1560.666839] wake disabled for irq 359

<6>[ 1560.667031] max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2

<6>[ 1560.667288] max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)

<6>[ 1560.667476] max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0

<4>[ 1560.667511] max8997 5-0066: Unused interrupt source: 0x0

<6>[ 1560.670538] IDPRAM : <dpram_power_up:3468> dpram_wakeup_init() ==> QSC_INT = LOW

<6>[ 1560.685058] IDPRAM : <dpram_powerup_start:3440> Received MBX_CMD_CP_WAKEUP_START!!!

<3>[ 1560.845700] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1560.850805] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1560.850891] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<1>[ 1560.850955] _cy_as_device: cy_as_event_misc_awake event callback triggered

<3>[ 1560.860328] [cyasdevice.c] cyasdevice_leave_standby end mode  count=8

<3>[ 1560.876012] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1560.876094] cyasblkdev_stop_sdcard : cy_as_storage_stop is called - found

<3>[ 1560.876265] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1561.309508] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1561.309592] cyasblkdev_start_sdcard : cy_as_storage_start is called

<3>[ 1561.309769] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1561.309851] cyasblkdev_start_sdcard : cy_as_storage_query_media is called - media count = 1

<3>[ 1561.310054] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1561.310152] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1561.310232] cyasblkdev_start_sdcard : cy_as_storage_query_device is called - found

<6>[ 1561.310711] PM: resume of devices complete after 674.007 msecs

<4>[ 1561.311710] Restarting tasks ...

<6>[ 1561.315486] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1561.315521] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(9 s)

<6>[ 1561.315570] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1561.316115] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=800

<6>[ 1561.320312] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1561.320379] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1561.320428] sec-battery sec-battery: soc(84), vfocv(4021), vcell(4022), temp(34), charging(2), health(1), chg_adc(0)

<4>[ 1561.331441] done.

<6>[ 1561.332102] exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0

<6>[ 1561.332151] suspend: exit suspend, ret = 0 (2012-08-03 16:28:04.531583041 UTC)

<3>[ 1561.332251] [cyasdevice.c] cy_wq_function:					leave standby

<3>[ 1561.332286] ++++++++++++  [cyasdevice.c] cy_wq_function: SD card is inserted.

<3>[ 1561.332479] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1561.335355] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1561.340353] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1561.340440] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1561.340516] cyasblkdev_check_sdcard : serial num = 0x7b 0xc4 0x42 0x95

<6>[ 1561.343277] request_suspend_state: wakeup (3->0) at 1561342987995 (2012-08-03 16:28:04.542699375 UTC)

<6>[ 1561.369532] mmc2: cmd 8 command timeout error

<4>[ 1561.369897] mmc2: card claims to support voltages below the defined range. These will be ignored.

<6>[ 1561.412475] mmc2: new high speed SDIO card at address 0001

<3>[ 1561.600038] [TSP] Calibration!!!!!!

<3>[ 1561.609575] [TSP] ta_status is 0

<3>[ 1561.609602] [TSP] mxt224_ta_probe

<3>[ 1561.610355] [TSP] Calibration End!!!!!!

<3>[ 1561.622000] [TSP]TA_probe MXT224E T48 Byte2 is 66

<3>[ 1561.635399] [TSP]TA_probe MXT224E T48 Byte2 is 98

<3>[ 1561.635743] [TSP] calibration success!!!

<6>[ 1561.636153] +s3cfb_late_resume

<7>[ 1561.636174] s3cfb - enable power domain

<6>[ 1561.636313] s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff

<7>[ 1561.636361] FIMD src sclk = 50000000

<6>[ 1561.636388] s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2

<6>[ 1561.636458] mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI

<6>[ 1561.636570] -s3cfb_late_resume

<6>[ 1561.636593] lcd panel: +ld9040_late_resume

<6>[ 1561.636620] lcd panel: ld9040_power_on

<3>[ 1561.667305] [TSP] Calibration!!!!!!

<3>[ 1561.679294] [TSP] Calibration End!!!!!!

<6>[ 1561.878759] lcd panel: id=0 brightness=18, bl=0, candela=30

<6>[ 1561.878842] lcd panel: -ld9040_late_resume

<6>[ 1561.878901] mdnie mdnie: +mdnie_late_resume

<6>[ 1561.878953] mdnie mdnie: -mdnie_late_resume

<7>[ 1561.879034] [TouchKey] sec_touchkey_late_resume

<6>[ 1561.880967] s5p_gpioint_set_type irq:389 is at GPL0(5)

<6>[ 1561.983283] lcd panel: id=0 brightness=30, bl=1, candela=40

<7>[ 1561.991419] [TouchKey] touchkey_autocalibration : data[0]=8 data[1]=e data[2]=8 data[3]=0

<7>[ 1562.096885] [Touchkey] autocal disabled, retry 0

<7>[ 1562.097899] [TouchKey] touchkey_autocalibration : data[0]=50 data[1]=e data[2]=8 data[3]=1

<7>[ 1562.201240] [Touchkey] autocal Enabled

<3>[ 1562.340497] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1562.340576] [cyasdevice.c] cyasdevice_enter_standby  end mode

<6>[ 1562.374087] lcd panel: id=0 brightness=72, bl=2, candela=70

<6>[ 1562.558210] lcd panel: id=0 brightness=91, bl=3, candela=90

<6>[ 1562.650569] lcd panel: id=0 brightness=101, bl=4, candela=100

<6>[ 1562.780455] cpu1 turning on!

<4>[ 1562.803679] CPU1: Booted secondary processor

<6>[ 1562.804425] cpu1 on

<6>[ 1562.805315] Switched to NOHz mode on CPU #1

<6>[ 1564.800660] cpu1 turnning off!

<4>[ 1564.802712] IRQ112 no longer affine to CPU1

<5>[ 1564.803881] CPU1: shutdown

<6>[ 1564.808273] cpu1 off!

<6>[ 1570.665844] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1570.666351] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1570.666476] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(18 s)

<6>[ 1570.666649] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1570.667633] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=802

<6>[ 1570.668120] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1570.668384] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1570.668572] sec-battery sec-battery: soc(84), vfocv(4021), vcell(4022), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1571.384857] request_suspend_state: sleep (0->3) at 1571384521210 (2012-08-03 16:28:14.584224214 UTC)

<7>[ 1571.385162] [TouchKey] sec_touchkey_early_suspend

<6>[ 1571.867373] lcd panel: id=0 brightness=0, bl=0, candela=30

<6>[ 1571.891569] lcd panel: +ld9040_early_suspend

<6>[ 1571.891681] lcd panel: ld9040_power_off

<6>[ 1572.219360] lcd panel: -ld9040_early_suspend

<6>[ 1572.219469] +s3cfb_early_suspend

<7>[ 1572.232007] s3cfb - disable power domain

<6>[ 1572.232123] -s3cfb_early_suspend

<6>[ 1572.351195] suspend: enter suspend

<6>[ 1572.351317] suspend: enter suspend, (2012-08-03 16:28:15.000000000 UTC)

<6>[ 1572.351451] PM: Syncing filesystems ... done.

<6>[ 1572.381412] exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0

<4>[ 1572.381451] Freezing user space processes ... (elapsed 0.02 seconds) done.

<4>[ 1572.405502] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

<4>[ 1572.420458] Suspending console(s) (use no_console_suspend to debug)

<6>[ 1572.446644] max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2012-08-03 16:37:48

<6>[ 1572.737355] IDPRAM : <dpram_power_down:3431> Received MBX_CMD_DPRAM_DOWN (lock count = 0)!!!

<6>[ 1572.737426] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 0

<6>[ 1572.738080] wake enabled for irq 359

<6>[ 1572.738348] USB3803 suspended

<6>[ 1572.738518] sec_jack_suspend: enable_irq_wake(0)

<7>[ 1572.738653] usb: android_work config=  (null),connected=0,sw_connected=0

<6>[ 1572.738690] android_work: did not send uevent (0 0   (null))

<6>[ 1572.739174] exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.

<6>[ 1572.745342] s5p_int_src_ext_hpd()

<6>[ 1572.745495] wake enabled for irq 375

<6>[ 1572.745518] wake enabled for irq 381

<6>[ 1572.745752] mmc2: card 0001 removed

<6>[ 1572.745926] sdhci_suspend_host : Enter WIFI suspend

<6>[ 1572.745992] u1_enable_regulator_for_usb_mipi: disable LDOs

<6>[ 1572.790758] PM: suspend of devices complete after 368.374 msecs

<4>[ 1572.795758] suspend_set_state: LED_A_2.8V: No configuration

<6>[ 1572.800358] power_suspend_late return 0

<6>[ 1572.800390] PM: late suspend of devices complete after 1.566 msecs

<4>[ 1572.800423] Disabling non-boot CPUs ...

<1>[ 1572.800863] PM: SLEEP

<6>[ 2199.000680] WAKEUP_STAT: 0x80000001

<6>[ 2199.000680] WAKEUP_INTx_PEND: 0x0, 0x1, 0x0, 0x0

<6>[ 1572.802002] PM: early resume of devices complete after 1.269 msecs

<6>[ 1572.802245] wakeup wake lock: DPRAM_PWDOWN

<6>[ 1572.802519] exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.

<6>[ 1572.802791] mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########

<6>[ 1572.803184] u1_enable_regulator_for_usb_mipi: enable LDOs

<6>[ 1572.805448] wake disabled for irq 375

<6>[ 1572.805474] wake disabled for irq 381

<6>[ 1572.805543] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

<4>[ 1572.806585] usb usb1: root hub lost power or was reset

<6>[ 1572.831473] sec_jack_resume: disable_irq_wake(0)

<6>[ 1572.831701] USB3803 resumed to mode standby

<6>[ 1572.833893] wake disabled for irq 359

<6>[ 1572.840376] IDPRAM : <dpram_power_up:3468> dpram_wakeup_init() ==> QSC_INT = HIGH

<6>[ 1572.840733] IDPRAM : <dpram_powerup_start:3440> Received MBX_CMD_CP_WAKEUP_START!!!

<3>[ 1573.010712] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1573.015814] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1573.015900] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<1>[ 1573.015967] _cy_as_device: cy_as_event_misc_awake event callback triggered

<3>[ 1573.025340] [cyasdevice.c] cyasdevice_leave_standby end mode  count=8

<3>[ 1573.041025] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1573.041106] cyasblkdev_stop_sdcard : cy_as_storage_stop is called - found

<3>[ 1573.041274] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1573.474517] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1573.474602] cyasblkdev_start_sdcard : cy_as_storage_start is called

<3>[ 1573.474782] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1573.474863] cyasblkdev_start_sdcard : cy_as_storage_query_media is called - media count = 1

<3>[ 1573.475063] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1573.475160] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1573.475241] cyasblkdev_start_sdcard : cy_as_storage_query_device is called - found

<6>[ 1573.475714] PM: resume of devices complete after 673.358 msecs

<4>[ 1573.476717] Restarting tasks ...

<6>[ 1573.480500] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1573.480536] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(21 s)

<6>[ 1573.480585] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1573.481132] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=814

<6>[ 1573.485326] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1573.485392] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1573.485441] sec-battery sec-battery: soc(84), vfocv(4023), vcell(4001), temp(34), charging(2), health(1), chg_adc(0)

<3>[ 1573.485515] [cyasdevice.c] cy_wq_function:					leave standby

<3>[ 1573.485549] ++++++++++++  [cyasdevice.c] cy_wq_function: SD card is inserted.

<3>[ 1573.485730] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1573.490356] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1573.490433] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1573.490510] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1573.495322] cyasblkdev_check_sdcard : serial num = 0x7b 0xc4 0x42 0x95

<6>[ 1573.503883] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1573.503924] [sec_bat_check_event_status] current batt_event_status = 0x40

<4>[ 1573.508514] done.

<6>[ 1573.509231] exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0

<6>[ 1573.509280] suspend: exit suspend, ret = 0 (2012-08-03 16:28:58.543686125 UTC)

<6>[ 1573.511575] request_suspend_state: wakeup (3->0) at 1573511273545 (2012-08-03 16:28:58.545972208 UTC)

<6>[ 1573.539535] mmc2: cmd 8 command timeout error

<4>[ 1573.539890] mmc2: card claims to support voltages below the defined range. These will be ignored.

<6>[ 1573.576795] mmc2: new high speed SDIO card at address 0001

<3>[ 1573.766913] [TSP] ta_status is 0

<3>[ 1573.766932] [TSP] mxt224_ta_probe

<3>[ 1573.767508] [TSP] Calibration!!!!!!

<3>[ 1573.775359] [TSP] Calibration End!!!!!!

<3>[ 1573.787764] [TSP]TA_probe MXT224E T48 Byte2 is 66

<3>[ 1573.800342] [TSP]TA_probe MXT224E T48 Byte2 is 98

<3>[ 1573.800668] [TSP] calibration success!!!

<6>[ 1573.801061] +s3cfb_late_resume

<7>[ 1573.801077] s3cfb - enable power domain

<6>[ 1573.801193] s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff

<7>[ 1573.801230] FIMD src sclk = 50000000

<6>[ 1573.801252] s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2

<6>[ 1573.801307] mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI

<6>[ 1573.801395] -s3cfb_late_resume

<6>[ 1573.801413] lcd panel: +ld9040_late_resume

<6>[ 1573.801433] lcd panel: ld9040_power_on

<3>[ 1573.835581] [TSP] Calibration!!!!!!

<3>[ 1573.847597] [TSP] Calibration End!!!!!!

<6>[ 1574.030425] lcd panel: id=0 brightness=26, bl=0, candela=30

<6>[ 1574.030507] lcd panel: -ld9040_late_resume

<6>[ 1574.030574] mdnie mdnie: +mdnie_late_resume

<6>[ 1574.030633] mdnie mdnie: -mdnie_late_resume

<7>[ 1574.030728] [TouchKey] sec_touchkey_late_resume

<6>[ 1574.032160] s5p_gpioint_set_type irq:389 is at GPL0(5)

<6>[ 1574.060738] lcd panel: id=0 brightness=30, bl=1, candela=40

<7>[ 1574.141437] [TouchKey] touchkey_autocalibration : data[0]=8 data[1]=e data[2]=8 data[3]=0

<7>[ 1574.246777] [Touchkey] autocal disabled, retry 0

<7>[ 1574.247791] [TouchKey] touchkey_autocalibration : data[0]=50 data[1]=e data[2]=8 data[3]=1

<7>[ 1574.351884] [Touchkey] autocal Enabled

<6>[ 1574.452337] lcd panel: id=0 brightness=72, bl=2, candela=70

<3>[ 1574.495485] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1574.495571] [cyasdevice.c] cyasdevice_enter_standby  end mode

<6>[ 1574.634439] lcd panel: id=0 brightness=91, bl=3, candela=90

<6>[ 1574.726185] lcd panel: id=0 brightness=101, bl=4, candela=100

<6>[ 1574.805415] cpu1 turning on!

<4>[ 1574.828987] CPU1: Booted secondary processor

<6>[ 1574.829671] cpu1 on

<6>[ 1574.830325] Switched to NOHz mode on CPU #1

<6>[ 1576.006192] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1576.006335] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1576.825926] cpu1 turnning off!

<4>[ 1576.827929] IRQ112 no longer affine to CPU1

<5>[ 1576.829070] CPU1: shutdown

<6>[ 1576.831845] cpu1 off!

<3>[ 1579.863911] [TSP] Dn[0]

<3>[ 1579.881857] [TSP] t: 4, a: 0

<6>[ 1579.886866] [VIB] vibrator_work: pwm_config duty=32935

<3>[ 1579.927532] [TSP] t: 2, a: 0

<3>[ 1579.944477] [TSP] t: 2, a: 0

<3>[ 1579.961485] [TSP] t: 2, a: 0

<3>[ 1579.978551] [TSP] t: 2, a: 0

<3>[ 1579.995285] [TSP] t: 4, a: 0

<3>[ 1580.012140] [TSP] t: 4, a: 0

<3>[ 1580.028876] [TSP] t: 3, a: 0

<3>[ 1580.045589] [TSP] t: 3, a: 0

<3>[ 1580.062257] [TSP] t: 2, a: 0

<3>[ 1580.079083] [TSP] t: 2, a: 0

<3>[ 1580.095974] [TSP] t: 2, a: 0

<3>[ 1580.109222] [TSP] Up[0]

<6>[ 1580.118049] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1580.534518] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1580.534585] [sec_bat_check_event_status] current batt_event_status = 0x40

<3>[ 1580.980109] [TSP] Dn[0]

<3>[ 1580.998415] [TSP] t: 2, a: 0

<3>[ 1580.998623] [TSP] calibration was good

<3>[ 1580.999433] [TSP] ta_status is 0

<3>[ 1581.248474] [TSP] Up[0]

<6>[ 1582.855953] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1582.856683] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1582.856803] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1582.857784] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=822

<6>[ 1582.858230] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1582.858468] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1582.858646] sec-battery sec-battery: soc(84), vfocv(4023), vcell(4001), temp(34), charging(2), health(1), chg_adc(0)

<3>[ 1582.987104] [TSP] Dn[0]

<3>[ 1583.135073] [TSP] Up[0]

<6>[ 1583.317860] audss_clk_enable:ON : CLKSRC[0x1], CLKGATE[0x1c7]

<6>[ 1583.319491] G:P:DmaAddr=@61d60000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000

<7>[ 1583.321470] i2s_txctrl:Turn on

<6>[ 1583.830386] cpu1 turning on!

<4>[ 1583.856029] CPU1: Booted secondary processor

<6>[ 1583.856717] cpu1 on

<6>[ 1583.860322] Switched to NOHz mode on CPU #1

<6>[ 1585.855709] cpu1 turnning off!

<4>[ 1585.857963] IRQ112 no longer affine to CPU1

<5>[ 1585.859161] CPU1: shutdown

<6>[ 1585.866642] cpu1 off!

<7>[ 1586.407656] i2s_txctrl: Turn Off - spr is no active

<6>[ 1586.408172] audss_clk_enable:OFF: CLKSRC[0x1], CLKGATE[0x1c3]

<6>[ 1592.991000] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1592.995789] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1592.995910] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1592.997599] sec-battery sec-battery: sec_bat_check_temper: temp=320, adc=831

<6>[ 1592.998056] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1592.998294] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1592.998471] sec-battery sec-battery: soc(84), vfocv(4021), vcell(4001), temp(32), charging(2), health(1), chg_adc(0)

<6>[ 1597.920664] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1597.920809] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1603.000909] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1603.005736] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1603.005861] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(5 s)

<6>[ 1603.006033] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1603.007614] sec-battery sec-battery: sec_bat_check_temper: temp=320, adc=833

<6>[ 1603.008061] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1603.008299] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1603.008478] sec-battery sec-battery: soc(84), vfocv(4021), vcell(4015), temp(32), charging(2), health(1), chg_adc(0)

<6>[ 1613.075996] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1613.081422] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1613.081547] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(15 s)

<6>[ 1613.081721] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1613.082678] sec-battery sec-battery: sec_bat_check_temper: temp=320, adc=838

<6>[ 1613.083434] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1613.083673] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1613.083850] sec-battery sec-battery: soc(84), vfocv(4021), vcell(4030), temp(32), charging(2), health(1), chg_adc(0)

<6>[ 1613.407533] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1613.407645] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1616.962874] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1616.963019] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1623.091217] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1623.091993] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1623.092119] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(6 s)

<6>[ 1623.092292] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1623.093273] sec-battery sec-battery: sec_bat_check_temper: temp=320, adc=835

<6>[ 1623.093773] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1623.094023] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1623.094213] sec-battery sec-battery: soc(84), vfocv(4021), vcell(4030), temp(32), charging(2), health(1), chg_adc(0)

<6>[ 1628.804111] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1628.804256] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1632.971102] sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=330

<6>[ 1633.123662] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1633.123888] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1633.123922] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1633.124469] sec-battery sec-battery: sec_bat_check_temper: temp=320, adc=835

<6>[ 1633.124683] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1633.124751] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1633.124800] sec-battery sec-battery: soc(84), vfocv(4021), vcell(3996), temp(32), charging(2), health(1), chg_adc(0)

<6>[ 1643.171464] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1643.171594] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1643.172557] sec-battery sec-battery: sec_bat_check_temper: temp=320, adc=835

<6>[ 1643.172874] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1643.173250] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1643.173488] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1643.173665] sec-battery sec-battery: soc(84), vfocv(4021), vcell(4001), temp(32), charging(2), health(1), chg_adc(0)

<3>[ 1645.708198] [TSP] Dn[0]

<3>[ 1645.809860] [TSP] Up[0]

<6>[ 1645.997792] audss_clk_enable:ON : CLKSRC[0x1], CLKGATE[0x1c7]

<6>[ 1645.999458] G:P:DmaAddr=@61d60000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000

<7>[ 1646.001458] i2s_txctrl:Turn on

<7>[ 1649.087534] i2s_txctrl: Turn Off - spr is no active

<6>[ 1649.087775] audss_clk_enable:OFF: CLKSRC[0x1], CLKGATE[0x1c3]

<3>[ 1649.811939] [TSP] Dn[0]

<3>[ 1649.959582] [TSP] Up[0]

<6>[ 1650.108825] audss_clk_enable:ON : CLKSRC[0x1], CLKGATE[0x1c7]

<6>[ 1650.111919] G:P:DmaAddr=@61d60000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000

<7>[ 1650.115421] i2s_txctrl:Turn on

<6>[ 1650.370403] cpu1 turning on!

<4>[ 1650.398307] CPU1: Booted secondary processor

<6>[ 1650.399028] cpu1 on

<6>[ 1650.400335] Switched to NOHz mode on CPU #1

<6>[ 1652.395378] cpu1 turnning off!

<4>[ 1652.395861] IRQ112 no longer affine to CPU1

<5>[ 1652.396118] CPU1: shutdown

<6>[ 1652.396629] cpu1 off!

<7>[ 1653.201575] i2s_txctrl: Turn Off - spr is no active

<6>[ 1653.202068] audss_clk_enable:OFF: CLKSRC[0x1], CLKGATE[0x1c3]

<6>[ 1653.205890] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1653.206017] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1653.207447] sec-battery sec-battery: sec_bat_check_temper: temp=320, adc=836

<6>[ 1653.207891] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1653.208127] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1653.208306] sec-battery sec-battery: soc(84), vfocv(4020), vcell(3984), temp(32), charging(2), health(1), chg_adc(0)

<6>[ 1653.215538] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1655.927742] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1656.395405] cpu1 turning on!

<4>[ 1656.420826] CPU1: Booted secondary processor

<6>[ 1656.421539] cpu1 on

<6>[ 1656.425336] Switched to NOHz mode on CPU #1

<6>[ 1657.983887] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1658.420413] cpu1 turnning off!

<4>[ 1658.420857] IRQ112 no longer affine to CPU1

<5>[ 1658.421125] CPU1: shutdown

<6>[ 1658.423660] cpu1 off!

<6>[ 1659.196204] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1659.196350] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1659.415224] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1662.281635] request_suspend_state: sleep (0->3) at 1662281285629 (2012-08-03 16:30:27.315976293 UTC)

<7>[ 1662.281944] [TouchKey] sec_touchkey_early_suspend

<3>[ 1662.460412] [TouchKey] touchkey is not enabled. 333

<6>[ 1662.787838] lcd panel: id=0 brightness=0, bl=0, candela=30

<6>[ 1662.901298] lcd panel: +ld9040_early_suspend

<6>[ 1662.901410] lcd panel: ld9040_power_off

<6>[ 1663.040654] sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=360

<6>[ 1663.225795] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1663.225831] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(4 s)

<6>[ 1663.225881] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1663.226398] sec-battery sec-battery: sec_bat_check_temper: temp=320, adc=831

<6>[ 1663.226455] lcd panel: -ld9040_early_suspend

<6>[ 1663.226479] +s3cfb_early_suspend

<6>[ 1663.235442] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1663.235498] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1663.235539] sec-battery sec-battery: soc(84), vfocv(4020), vcell(3984), temp(32), charging(2), health(1), chg_adc(0)

<6>[ 1663.243445] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<7>[ 1663.259045] s3cfb - disable power domain

<6>[ 1663.259089] -s3cfb_early_suspend

<6>[ 1663.307069] suspend: enter suspend

<6>[ 1663.307110] suspend: enter suspend, (2012-08-03 16:30:28.000000000 UTC)

<6>[ 1663.307158] PM: Syncing filesystems ... done.

<6>[ 1663.324218] exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0

<4>[ 1663.324257] Freezing user space processes ... (elapsed 0.02 seconds) done.

<4>[ 1663.345563] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

<4>[ 1663.360471] Suspending console(s) (use no_console_suspend to debug)

<6>[ 1663.410653] max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2012-08-03 16:30:35

<6>[ 1663.702239] IDPRAM : <dpram_power_down:3431> Received MBX_CMD_DPRAM_DOWN (lock count = 0)!!!

<6>[ 1663.702310] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 0

<6>[ 1663.702974] wake enabled for irq 359

<6>[ 1663.703243] USB3803 suspended

<6>[ 1663.703414] sec_jack_suspend: enable_irq_wake(0)

<7>[ 1663.703548] usb: android_work config=  (null),connected=0,sw_connected=0

<6>[ 1663.703584] android_work: did not send uevent (0 0   (null))

<6>[ 1663.704068] exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.

<6>[ 1663.710353] s5p_int_src_ext_hpd()

<6>[ 1663.710505] wake enabled for irq 375

<6>[ 1663.710529] wake enabled for irq 381

<6>[ 1663.710764] mmc2: card 0001 removed

<6>[ 1663.710938] sdhci_suspend_host : Enter WIFI suspend

<6>[ 1663.711005] u1_enable_regulator_for_usb_mipi: disable LDOs

<6>[ 1663.755650] PM: suspend of devices complete after 393.259 msecs

<4>[ 1663.760645] suspend_set_state: LED_A_2.8V: No configuration

<6>[ 1663.765216] power_suspend_late return 0

<6>[ 1663.765248] PM: late suspend of devices complete after 1.540 msecs

<4>[ 1663.765281] Disabling non-boot CPUs ...

<1>[ 1663.765762] PM: SLEEP

<6>[ 2199.000680] WAKEUP_STAT: 0x80000001

<6>[ 2199.000680] WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0

<6>[ 1663.766889] PM: early resume of devices complete after 1.266 msecs

<6>[ 1663.767347] exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.

<6>[ 1663.767619] mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########

<6>[ 1663.768015] u1_enable_regulator_for_usb_mipi: enable LDOs

<6>[ 1663.770501] wake disabled for irq 375

<6>[ 1663.770527] wake disabled for irq 381

<6>[ 1663.770575] wakeup wake lock: event1-2067

<6>[ 1663.770655] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

<4>[ 1663.771726] usb usb1: root hub lost power or was reset

<6>[ 1663.795428] sec_jack_resume: disable_irq_wake(0)

<6>[ 1663.795642] USB3803 resumed to mode standby

<6>[ 1663.796870] wake disabled for irq 359

<6>[ 1663.797068] max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2

<6>[ 1663.797326] max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)

<6>[ 1663.797515] max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0

<4>[ 1663.797551] max8997 5-0066: Unused interrupt source: 0x0

<6>[ 1663.800660] IDPRAM : <dpram_power_up:3468> dpram_wakeup_init() ==> QSC_INT = LOW

<6>[ 1663.815032] IDPRAM : <dpram_powerup_start:3440> Received MBX_CMD_CP_WAKEUP_START!!!

<3>[ 1663.955725] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1663.960829] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1663.960931] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<1>[ 1663.961010] _cy_as_device: cy_as_event_misc_awake event callback triggered

<3>[ 1663.970355] [cyasdevice.c] cyasdevice_leave_standby end mode  count=8

<3>[ 1663.986038] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1663.986122] cyasblkdev_stop_sdcard : cy_as_storage_stop is called - found

<3>[ 1663.986293] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1664.419536] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1664.419609] cyasblkdev_start_sdcard : cy_as_storage_start is called

<3>[ 1664.419789] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1664.419859] cyasblkdev_start_sdcard : cy_as_storage_query_media is called - media count = 1

<3>[ 1664.420060] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1664.420137] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1664.420205] cyasblkdev_start_sdcard : cy_as_storage_query_device is called - found

<6>[ 1664.420684] PM: resume of devices complete after 653.510 msecs

<4>[ 1664.421683] Restarting tasks ...

<6>[ 1664.425511] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1664.425547] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(5 s)

<6>[ 1664.425596] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1664.426144] sec-battery sec-battery: sec_bat_check_temper: temp=320, adc=830

<6>[ 1664.426337] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1664.426403] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1664.426453] sec-battery sec-battery: soc(84), vfocv(4020), vcell(4019), temp(32), charging(2), health(1), chg_adc(0)

<4>[ 1664.441483] done.

<6>[ 1664.442198] exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0

<6>[ 1664.442247] suspend: exit suspend, ret = 0 (2012-08-03 16:30:35.511637209 UTC)

<3>[ 1664.442304] [cyasdevice.c] cy_wq_function:					leave standby

<3>[ 1664.442338] ++++++++++++  [cyasdevice.c] cy_wq_function: SD card is inserted.

<3>[ 1664.442534] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1664.450373] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1664.450459] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1664.450762] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1664.450839] cyasblkdev_check_sdcard : serial num = 0x7b 0xc4 0x42 0x95

<6>[ 1664.469981] request_suspend_state: wakeup (3->0) at 1664469667089 (2012-08-03 16:30:35.539362125 UTC)

<6>[ 1664.479580] mmc2: cmd 8 command timeout error

<4>[ 1664.479946] mmc2: card claims to support voltages below the defined range. These will be ignored.

<6>[ 1664.521837] mmc2: new high speed SDIO card at address 0001

<3>[ 1664.709848] [TSP] ta_status is 0

<3>[ 1664.709868] [TSP] mxt224_ta_probe

<3>[ 1664.710130] [TSP] Calibration!!!!!!

<3>[ 1664.720387] [TSP] Calibration End!!!!!!

<3>[ 1664.740374] [TSP]TA_probe MXT224E T48 Byte2 is 66

<3>[ 1664.745231] [TSP]TA_probe MXT224E T48 Byte2 is 98

<3>[ 1664.746326] [TSP] calibration success!!!

<6>[ 1664.746729] +s3cfb_late_resume

<7>[ 1664.746753] s3cfb - enable power domain

<6>[ 1664.746886] s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff

<7>[ 1664.746930] FIMD src sclk = 50000000

<6>[ 1664.746955] s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2

<6>[ 1664.747024] mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI

<6>[ 1664.747127] -s3cfb_late_resume

<6>[ 1664.747149] lcd panel: +ld9040_late_resume

<6>[ 1664.747175] lcd panel: ld9040_power_on

<3>[ 1664.747215] [TSP] Calibration!!!!!!

<3>[ 1664.758400] [TSP] Calibration End!!!!!!

<6>[ 1664.940442] cpu1 turning on!

<4>[ 1664.970347] CPU1: Booted secondary processor

<6>[ 1664.971518] cpu1 on

<6>[ 1664.975369] Switched to NOHz mode on CPU #1

<6>[ 1664.987586] lcd panel: id=0 brightness=21, bl=0, candela=30

<6>[ 1664.987623] lcd panel: -ld9040_late_resume

<6>[ 1664.987654] mdnie mdnie: +mdnie_late_resume

<6>[ 1664.987681] mdnie mdnie: -mdnie_late_resume

<7>[ 1664.987724] [TouchKey] sec_touchkey_late_resume

<6>[ 1664.988202] s5p_gpioint_set_type irq:389 is at GPL0(5)

<6>[ 1665.072586] lcd panel: id=0 brightness=32, bl=1, candela=40

<7>[ 1665.095960] [TouchKey] touchkey_autocalibration : data[0]=8 data[1]=e data[2]=8 data[3]=0

<7>[ 1665.201171] [Touchkey] autocal disabled, retry 0

<7>[ 1665.201780] [TouchKey] touchkey_autocalibration : data[0]=50 data[1]=e data[2]=8 data[3]=1

<7>[ 1665.306163] [Touchkey] autocal Enabled

<6>[ 1665.437080] lcd panel: id=0 brightness=71, bl=2, candela=70

<3>[ 1665.450522] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1665.450623] [cyasdevice.c] cyasdevice_enter_standby  end mode

<7>[ 1665.510621] LED returned on

<6>[ 1665.632041] lcd panel: id=0 brightness=91, bl=3, candela=90

<6>[ 1665.722535] lcd panel: id=0 brightness=101, bl=4, candela=100

<6>[ 1665.977879] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1665.977931] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1666.970661] cpu1 turnning off!

<4>[ 1666.972841] IRQ112 no longer affine to CPU1

<5>[ 1666.974012] CPU1: shutdown

<6>[ 1666.977565] cpu1 off!

<6>[ 1673.961047] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1673.965682] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1673.965803] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1673.967513] sec-battery sec-battery: sec_bat_check_temper: temp=320, adc=827

<6>[ 1673.967955] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1673.968193] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1673.968423] sec-battery sec-battery: soc(84), vfocv(4020), vcell(4000), temp(32), charging(2), health(1), chg_adc(0)

<6>[ 1674.496299] request_suspend_state: sleep (0->3) at 1674495930053 (2012-08-03 16:30:45.565616923 UTC)

<7>[ 1674.496614] [TouchKey] sec_touchkey_early_suspend

<6>[ 1675.012105] lcd panel: +ld9040_early_suspend

<6>[ 1675.012209] lcd panel: ld9040_power_off

<6>[ 1675.332321] lcd panel: -ld9040_early_suspend

<6>[ 1675.332430] +s3cfb_early_suspend

<7>[ 1675.342574] s3cfb - disable power domain

<6>[ 1675.342690] -s3cfb_early_suspend

<6>[ 1675.450728] suspend: enter suspend

<6>[ 1675.450791] suspend: enter suspend, (2012-08-03 16:30:46.000000000 UTC)

<6>[ 1675.450873] PM: Syncing filesystems ... done.

<6>[ 1675.475818] exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0

<4>[ 1675.475857] Freezing user space processes ... (elapsed 0.02 seconds) done.

<4>[ 1675.500528] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

<4>[ 1675.515486] Suspending console(s) (use no_console_suspend to debug)

<6>[ 1675.541667] max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2012-08-03 16:30:57

<6>[ 1675.852877] IDPRAM : <dpram_power_down:3431> Received MBX_CMD_DPRAM_DOWN (lock count = 0)!!!

<6>[ 1675.852949] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 0

<6>[ 1675.853599] wake enabled for irq 359

<6>[ 1675.853867] USB3803 suspended

<6>[ 1675.854037] sec_jack_suspend: enable_irq_wake(0)

<7>[ 1675.854170] usb: android_work config=  (null),connected=0,sw_connected=0

<6>[ 1675.854208] android_work: did not send uevent (0 0   (null))

<6>[ 1675.854690] exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.

<6>[ 1675.860366] s5p_int_src_ext_hpd()

<6>[ 1675.860516] wake enabled for irq 375

<6>[ 1675.860540] wake enabled for irq 381

<6>[ 1675.860779] mmc2: card 0001 removed

<6>[ 1675.860953] sdhci_suspend_host : Enter WIFI suspend

<6>[ 1675.861019] u1_enable_regulator_for_usb_mipi: disable LDOs

<6>[ 1675.906273] PM: suspend of devices complete after 388.863 msecs

<4>[ 1675.911280] suspend_set_state: LED_A_2.8V: No configuration

<6>[ 1675.915879] power_suspend_late return 0

<6>[ 1675.915912] PM: late suspend of devices complete after 1.573 msecs

<4>[ 1675.915946] Disabling non-boot CPUs ...

<1>[ 1675.916374] PM: SLEEP

<6>[ 2199.000680] WAKEUP_STAT: 0x80000001

<6>[ 2199.000680] WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0

<6>[ 1675.917517] PM: early resume of devices complete after 1.263 msecs

<6>[ 1675.917975] exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.

<6>[ 1675.918247] mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########

<6>[ 1675.918640] u1_enable_regulator_for_usb_mipi: enable LDOs

<6>[ 1675.921138] wake disabled for irq 375

<6>[ 1675.921163] wake disabled for irq 381

<6>[ 1675.921211] wakeup wake lock: event1-2067

<6>[ 1675.921290] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

<4>[ 1675.922359] usb usb1: root hub lost power or was reset

<6>[ 1675.945440] sec_jack_resume: disable_irq_wake(0)

<6>[ 1675.945650] USB3803 resumed to mode standby

<6>[ 1675.946877] wake disabled for irq 359

<6>[ 1675.947075] max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2

<6>[ 1675.947332] max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)

<6>[ 1675.947521] max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0

<4>[ 1675.947557] max8997 5-0066: Unused interrupt source: 0x0

<6>[ 1675.950584] IDPRAM : <dpram_power_up:3468> dpram_wakeup_init() ==> QSC_INT = LOW

<6>[ 1675.954291] IDPRAM : <dpram_powerup_start:3440> Received MBX_CMD_CP_WAKEUP_START!!!

<3>[ 1676.140735] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1676.145838] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1676.145924] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<1>[ 1676.145989] _cy_as_device: cy_as_event_misc_awake event callback triggered

<3>[ 1676.155365] [cyasdevice.c] cyasdevice_leave_standby end mode  count=8

<3>[ 1676.171054] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1676.171137] cyasblkdev_stop_sdcard : cy_as_storage_stop is called - found

<3>[ 1676.171306] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1676.604549] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1676.604633] cyasblkdev_start_sdcard : cy_as_storage_start is called

<3>[ 1676.604812] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1676.604894] cyasblkdev_start_sdcard : cy_as_storage_query_media is called - media count = 1

<3>[ 1676.605096] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1676.605194] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1676.605274] cyasblkdev_start_sdcard : cy_as_storage_query_device is called - found

<6>[ 1676.605753] PM: resume of devices complete after 687.949 msecs

<4>[ 1676.606764] Restarting tasks ...

<6>[ 1676.623832] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1676.623870] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1676.624426] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=823

<6>[ 1676.625222] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1676.625291] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1676.625379] sec-battery sec-battery: soc(84), vfocv(4020), vcell(4046), temp(34), charging(2), health(1), chg_adc(0)

<4>[ 1676.627271] done.

<6>[ 1676.627922] exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0

<6>[ 1676.627971] suspend: exit suspend, ret = 0 (2012-08-03 16:30:57.547364000 UTC)

<3>[ 1676.628072] [cyasdevice.c] cy_wq_function:					leave standby

<3>[ 1676.628105] ++++++++++++  [cyasdevice.c] cy_wq_function: SD card is inserted.

<3>[ 1676.628301] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1676.635384] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1676.635469] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1676.635553] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1676.635627] cyasblkdev_check_sdcard : serial num = 0x7b 0xc4 0x42 0x95

<6>[ 1676.637192] request_suspend_state: wakeup (3->0) at 1676636867260 (2012-08-03 16:30:57.556576958 UTC)

<6>[ 1676.659666] mmc2: cmd 8 command timeout error

<4>[ 1676.660022] mmc2: card claims to support voltages below the defined range. These will be ignored.

<6>[ 1676.702876] mmc2: new high speed SDIO card at address 0001

<3>[ 1676.897887] [TSP] Calibration!!!!!!

<3>[ 1676.898559] [TSP] ta_status is 0

<3>[ 1676.898583] [TSP] mxt224_ta_probe

<3>[ 1676.905446] [TSP] Calibration End!!!!!!

<3>[ 1676.925433] [TSP]TA_probe MXT224E T48 Byte2 is 66

<3>[ 1676.940379] [TSP]TA_probe MXT224E T48 Byte2 is 98

<3>[ 1676.940713] [TSP] calibration success!!!

<6>[ 1676.941121] +s3cfb_late_resume

<7>[ 1676.941142] s3cfb - enable power domain

<6>[ 1676.941279] s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff

<7>[ 1676.941327] FIMD src sclk = 50000000

<6>[ 1676.941354] s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2

<6>[ 1676.941424] mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI

<6>[ 1676.941534] -s3cfb_late_resume

<6>[ 1676.941557] lcd panel: +ld9040_late_resume

<6>[ 1676.941583] lcd panel: ld9040_power_on

<3>[ 1676.961188] [TSP] Calibration!!!!!!

<3>[ 1676.973214] [TSP] Calibration End!!!!!!

<6>[ 1677.169796] lcd panel: id=0 brightness=21, bl=0, candela=30

<6>[ 1677.169880] lcd panel: -ld9040_late_resume

<6>[ 1677.169947] mdnie mdnie: +mdnie_late_resume

<6>[ 1677.170010] mdnie mdnie: -mdnie_late_resume

<7>[ 1677.170104] [TouchKey] sec_touchkey_late_resume

<6>[ 1677.173441] s5p_gpioint_set_type irq:389 is at GPL0(5)

<6>[ 1677.250967] lcd panel: id=0 brightness=30, bl=1, candela=40

<7>[ 1677.281418] [TouchKey] touchkey_autocalibration : data[0]=8 data[1]=e data[2]=8 data[3]=0

<7>[ 1677.386830] [Touchkey] autocal disabled, retry 0

<7>[ 1677.387913] [TouchKey] touchkey_autocalibration : data[0]=50 data[1]=e data[2]=8 data[3]=1

<7>[ 1677.491216] [Touchkey] autocal Enabled

<6>[ 1677.630948] lcd panel: id=0 brightness=71, bl=2, candela=70

<3>[ 1677.635516] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1677.635599] [cyasdevice.c] cyasdevice_enter_standby  end mode

<6>[ 1677.805527] lcd panel: id=0 brightness=90, bl=3, candela=90

<6>[ 1677.902641] lcd panel: id=0 brightness=100, bl=4, candela=100

<6>[ 1677.975425] cpu1 turning on!

<4>[ 1677.991006] CPU1: Booted secondary processor

<6>[ 1677.991831] cpu1 on

<6>[ 1677.995368] Switched to NOHz mode on CPU #1

<6>[ 1679.990728] cpu1 turnning off!

<4>[ 1679.992701] IRQ112 no longer affine to CPU1

<5>[ 1679.993849] CPU1: shutdown

<6>[ 1679.996477] cpu1 off!

<6>[ 1685.995996] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1686.001892] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1686.002011] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1686.002977] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=822

<6>[ 1686.003481] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1686.003742] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1686.003932] sec-battery sec-battery: soc(84), vfocv(4019), vcell(3998), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1686.651661] request_suspend_state: sleep (0->3) at 1686651277974 (2012-08-03 16:31:07.570979006 UTC)

<7>[ 1686.651963] [TouchKey] sec_touchkey_early_suspend

<6>[ 1687.134540] lcd panel: id=0 brightness=0, bl=0, candela=30

<6>[ 1687.156569] lcd panel: +ld9040_early_suspend

<6>[ 1687.156679] lcd panel: ld9040_power_off

<6>[ 1687.483382] lcd panel: -ld9040_early_suspend

<6>[ 1687.483492] +s3cfb_early_suspend

<7>[ 1687.486822] s3cfb - disable power domain

<6>[ 1687.486934] -s3cfb_early_suspend

<6>[ 1687.595562] suspend: enter suspend

<6>[ 1687.595625] suspend: enter suspend, (2012-08-03 16:31:08.000000000 UTC)

<6>[ 1687.595707] PM: Syncing filesystems ... done.

<6>[ 1687.609856] exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0

<4>[ 1687.609895] Freezing user space processes ... (elapsed 0.01 seconds) done.

<4>[ 1687.625533] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

<4>[ 1687.640497] Suspending console(s) (use no_console_suspend to debug)

<6>[ 1687.666678] max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2012-08-03 16:37:48

<6>[ 1687.977600] IDPRAM : <dpram_power_down:3431> Received MBX_CMD_DPRAM_DOWN (lock count = 0)!!!

<6>[ 1687.977672] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 0

<6>[ 1687.978328] wake enabled for irq 359

<6>[ 1687.978597] USB3803 suspended

<6>[ 1687.978766] sec_jack_suspend: enable_irq_wake(0)

<7>[ 1687.978900] usb: android_work config=  (null),connected=0,sw_connected=0

<6>[ 1687.978937] android_work: did not send uevent (0 0   (null))

<6>[ 1687.979418] exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.

<6>[ 1687.985379] s5p_int_src_ext_hpd()

<6>[ 1687.985531] wake enabled for irq 375

<6>[ 1687.985554] wake enabled for irq 381

<6>[ 1687.985790] mmc2: card 0001 removed

<6>[ 1687.985963] sdhci_suspend_host : Enter WIFI suspend

<6>[ 1687.986031] u1_enable_regulator_for_usb_mipi: disable LDOs

<6>[ 1688.031074] PM: suspend of devices complete after 388.660 msecs

<4>[ 1688.036051] suspend_set_state: LED_A_2.8V: No configuration

<6>[ 1688.040637] power_suspend_late return 0

<6>[ 1688.040670] PM: late suspend of devices complete after 1.570 msecs

<4>[ 1688.040703] Disabling non-boot CPUs ...

<1>[ 1688.041130] PM: SLEEP

<6>[ 2199.000680] WAKEUP_STAT: 0x80000001

<6>[ 2199.000680] WAKEUP_INTx_PEND: 0x0, 0x1, 0x0, 0x0

<6>[ 1688.042284] PM: early resume of devices complete after 1.268 msecs

<6>[ 1688.042531] wakeup wake lock: DPRAM_PWDOWN

<6>[ 1688.042809] exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.

<6>[ 1688.043082] mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########

<6>[ 1688.043478] u1_enable_regulator_for_usb_mipi: enable LDOs

<6>[ 1688.045958] wake disabled for irq 375

<6>[ 1688.045984] wake disabled for irq 381

<6>[ 1688.046080] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

<4>[ 1688.047154] usb usb1: root hub lost power or was reset

<6>[ 1688.070451] sec_jack_resume: disable_irq_wake(0)

<6>[ 1688.070666] USB3803 resumed to mode standby

<6>[ 1688.071895] wake disabled for irq 359

<6>[ 1688.075279] IDPRAM : <dpram_power_up:3468> dpram_wakeup_init() ==> QSC_INT = HIGH

<6>[ 1688.075645] IDPRAM : <dpram_powerup_start:3440> Received MBX_CMD_CP_WAKEUP_START!!!

<3>[ 1688.265749] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1688.270854] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1688.270940] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<1>[ 1688.271007] _cy_as_device: cy_as_event_misc_awake event callback triggered

<3>[ 1688.280378] [cyasdevice.c] cyasdevice_leave_standby end mode  count=8

<3>[ 1688.296066] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1688.296150] cyasblkdev_stop_sdcard : cy_as_storage_stop is called - found

<3>[ 1688.296321] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1688.729563] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1688.729650] cyasblkdev_start_sdcard : cy_as_storage_start is called

<3>[ 1688.729829] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1688.729912] cyasblkdev_start_sdcard : cy_as_storage_query_media is called - media count = 1

<3>[ 1688.730116] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1688.730215] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1688.730297] cyasblkdev_start_sdcard : cy_as_storage_query_device is called - found

<6>[ 1688.730769] PM: resume of devices complete after 688.125 msecs

<4>[ 1688.731780] Restarting tasks ...

<6>[ 1688.749280] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1688.749319] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1688.749877] sec-battery sec-battery: sec_bat_check_temper: temp=320, adc=829

<6>[ 1688.750660] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1688.750730] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1688.750781] sec-battery sec-battery: soc(84), vfocv(4022), vcell(4022), temp(32), charging(2), health(1), chg_adc(0)

<4>[ 1688.752422] done.

<6>[ 1688.753071] exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0

<6>[ 1688.753120] suspend: exit suspend, ret = 0 (2012-08-03 16:32:12.547500708 UTC)

<3>[ 1688.753223] [cyasdevice.c] cy_wq_function:					leave standby

<3>[ 1688.753258] ++++++++++++  [cyasdevice.c] cy_wq_function: SD card is inserted.

<3>[ 1688.753455] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1688.760396] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1688.760483] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1688.760570] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1688.760645] cyasblkdev_check_sdcard : serial num = 0x7b 0xc4 0x42 0x95

<6>[ 1688.763323] request_suspend_state: wakeup (3->0) at 1688762985686 (2012-08-03 16:32:12.557694667 UTC)

<6>[ 1688.789558] mmc2: cmd 8 command timeout error

<4>[ 1688.789929] mmc2: card claims to support voltages below the defined range. These will be ignored.

<6>[ 1688.828060] mmc2: new high speed SDIO card at address 0001

<3>[ 1689.020530] [TSP] Calibration!!!!!!

<3>[ 1689.023005] [TSP] ta_status is 0

<3>[ 1689.023029] [TSP] mxt224_ta_probe

<3>[ 1689.030416] [TSP] Calibration End!!!!!!

<3>[ 1689.042031] [TSP]TA_probe MXT224E T48 Byte2 is 66

<3>[ 1689.055431] [TSP]TA_probe MXT224E T48 Byte2 is 98

<3>[ 1689.055759] [TSP] calibration success!!!

<6>[ 1689.056152] +s3cfb_late_resume

<7>[ 1689.056168] s3cfb - enable power domain

<6>[ 1689.056284] s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff

<7>[ 1689.056321] FIMD src sclk = 50000000

<6>[ 1689.056343] s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2

<6>[ 1689.056397] mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI

<6>[ 1689.056485] -s3cfb_late_resume

<6>[ 1689.056503] lcd panel: +ld9040_late_resume

<6>[ 1689.056524] lcd panel: ld9040_power_on

<3>[ 1689.087338] [TSP] Calibration!!!!!!

<3>[ 1689.099379] [TSP] Calibration End!!!!!!

<6>[ 1689.285762] lcd panel: id=0 brightness=24, bl=0, candela=30

<6>[ 1689.285853] lcd panel: -ld9040_late_resume

<6>[ 1689.285922] mdnie mdnie: +mdnie_late_resume

<6>[ 1689.285984] mdnie mdnie: -mdnie_late_resume

<7>[ 1689.286076] [TouchKey] sec_touchkey_late_resume

<6>[ 1689.287466] s5p_gpioint_set_type irq:389 is at GPL0(5)

<6>[ 1689.332274] lcd panel: id=0 brightness=30, bl=1, candela=40

<7>[ 1689.396843] [TouchKey] touchkey_autocalibration : data[0]=8 data[1]=e data[2]=8 data[3]=0

<7>[ 1689.502061] [Touchkey] autocal disabled, retry 0

<7>[ 1689.503145] [TouchKey] touchkey_autocalibration : data[0]=50 data[1]=e data[2]=8 data[3]=1

<7>[ 1689.606270] [Touchkey] autocal Enabled

<6>[ 1689.703198] lcd panel: id=0 brightness=70, bl=2, candela=70

<3>[ 1689.760516] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1689.760594] [cyasdevice.c] cyasdevice_enter_standby  end mode

<6>[ 1689.893875] lcd panel: id=0 brightness=90, bl=3, candela=90

<6>[ 1689.987691] lcd panel: id=0 brightness=100, bl=4, candela=100

<6>[ 1690.000482] cpu1 turning on!

<4>[ 1690.025148] CPU1: Booted secondary processor

<6>[ 1690.026003] cpu1 on

<6>[ 1690.030385] Switched to NOHz mode on CPU #1

<6>[ 1692.025701] cpu1 turnning off!

<4>[ 1692.027671] IRQ112 no longer affine to CPU1

<5>[ 1692.028810] CPU1: shutdown

<6>[ 1692.031470] cpu1 off!

<6>[ 1698.080920] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1698.081419] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1698.081538] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1698.082568] sec-battery sec-battery: sec_bat_check_temper: temp=320, adc=830

<6>[ 1698.083018] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1698.083267] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1698.083458] sec-battery sec-battery: soc(84), vfocv(4022), vcell(4022), temp(32), charging(2), health(1), chg_adc(0)

<6>[ 1698.813063] request_suspend_state: sleep (0->3) at 1698812677566 (2012-08-03 16:32:22.607377172 UTC)

<7>[ 1698.813389] [TouchKey] sec_touchkey_early_suspend

<6>[ 1699.297606] lcd panel: id=0 brightness=0, bl=0, candela=30

<6>[ 1699.316978] lcd panel: +ld9040_early_suspend

<6>[ 1699.317092] lcd panel: ld9040_power_off

<6>[ 1699.637332] lcd panel: -ld9040_early_suspend

<6>[ 1699.637450] +s3cfb_early_suspend

<7>[ 1699.651918] s3cfb - disable power domain

<6>[ 1699.652036] -s3cfb_early_suspend

<6>[ 1699.765745] suspend: enter suspend

<6>[ 1699.765820] suspend: enter suspend, (2012-08-03 16:32:23.000000000 UTC)

<6>[ 1699.765921] PM: Syncing filesystems ... done.

<6>[ 1699.779459] exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0

<4>[ 1699.779498] Freezing user space processes ... (elapsed 0.02 seconds) done.

<4>[ 1699.805555] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

<4>[ 1699.820508] Suspending console(s) (use no_console_suspend to debug)

<6>[ 1699.870734] max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2012-08-03 16:37:49

<6>[ 1700.180151] IDPRAM : <dpram_power_down:3431> Received MBX_CMD_DPRAM_DOWN (lock count = 0)!!!

<6>[ 1700.180225] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 0

<6>[ 1700.180948] wake enabled for irq 359

<6>[ 1700.181222] USB3803 suspended

<6>[ 1700.181394] sec_jack_suspend: enable_irq_wake(0)

<7>[ 1700.181531] usb: android_work config=  (null),connected=0,sw_connected=0

<6>[ 1700.181569] android_work: did not send uevent (0 0   (null))

<6>[ 1700.182052] exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.

<6>[ 1700.195367] s5p_int_src_ext_hpd()

<6>[ 1700.195522] wake enabled for irq 375

<6>[ 1700.195546] wake enabled for irq 381

<6>[ 1700.195782] mmc2: card 0001 removed

<6>[ 1700.195956] sdhci_suspend_host : Enter WIFI suspend

<6>[ 1700.196026] u1_enable_regulator_for_usb_mipi: disable LDOs

<6>[ 1700.233621] PM: suspend of devices complete after 411.192 msecs

<4>[ 1700.238619] suspend_set_state: LED_A_2.8V: No configuration

<6>[ 1700.243190] power_suspend_late return 0

<6>[ 1700.243225] PM: late suspend of devices complete after 1.540 msecs

<4>[ 1700.243264] Disabling non-boot CPUs ...

<1>[ 1700.243703] PM: SLEEP

<6>[ 2199.000680] WAKEUP_STAT: 0x80000001

<6>[ 2199.000680] WAKEUP_INTx_PEND: 0x0, 0x1, 0x0, 0x0

<6>[ 1700.244835] PM: early resume of devices complete after 1.262 msecs

<6>[ 1700.245084] wakeup wake lock: DPRAM_PWDOWN

<6>[ 1700.245400] exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.

<6>[ 1700.245672] mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########

<6>[ 1700.246070] u1_enable_regulator_for_usb_mipi: enable LDOs

<6>[ 1700.248546] wake disabled for irq 375

<6>[ 1700.248572] wake disabled for irq 381

<6>[ 1700.248666] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

<4>[ 1700.249740] usb usb1: root hub lost power or was reset

<6>[ 1700.270460] sec_jack_resume: disable_irq_wake(0)

<6>[ 1700.270677] USB3803 resumed to mode standby

<6>[ 1700.270895] wake disabled for irq 359

<6>[ 1700.274259] IDPRAM : <dpram_power_up:3468> dpram_wakeup_init() ==> QSC_INT = HIGH

<6>[ 1700.274604] IDPRAM : <dpram_powerup_start:3440> Received MBX_CMD_CP_WAKEUP_START!!!

<3>[ 1700.465762] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1700.470868] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1700.470958] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<1>[ 1700.471029] _cy_as_device: cy_as_event_misc_awake event callback triggered

<3>[ 1700.480394] [cyasdevice.c] cyasdevice_leave_standby end mode  count=8

<3>[ 1700.496073] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1700.496161] cyasblkdev_stop_sdcard : cy_as_storage_stop is called - found

<3>[ 1700.496331] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1700.929541] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1700.929631] cyasblkdev_start_sdcard : cy_as_storage_start is called

<3>[ 1700.929813] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1700.929895] cyasblkdev_start_sdcard : cy_as_storage_query_media is called - media count = 1

<3>[ 1700.930103] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1700.930204] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1700.930285] cyasblkdev_start_sdcard : cy_as_storage_query_device is called - found

<6>[ 1700.930765] PM: resume of devices complete after 685.568 msecs

<4>[ 1700.931781] Restarting tasks ...

<6>[ 1700.949074] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1700.949111] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1700.949673] sec-battery sec-battery: sec_bat_check_temper: temp=320, adc=838

<6>[ 1700.950490] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1700.950562] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1700.950617] sec-battery sec-battery: soc(85), vfocv(4028), vcell(4001), temp(32), charging(2), health(1), chg_adc(0)

<4>[ 1700.952222] done.

<6>[ 1700.952871] exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0

<6>[ 1700.952926] suspend: exit suspend, ret = 0 (2012-08-03 16:34:36.547294417 UTC)

<3>[ 1700.953027] [cyasdevice.c] cy_wq_function:					leave standby

<3>[ 1700.953062] ++++++++++++  [cyasdevice.c] cy_wq_function: SD card is inserted.

<3>[ 1700.953263] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1700.960409] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1700.960493] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1700.960582] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1700.960661] cyasblkdev_check_sdcard : serial num = 0x7b 0xc4 0x42 0x95

<6>[ 1700.962995] request_suspend_state: wakeup (3->0) at 1700962645525 (2012-08-03 16:34:36.557354626 UTC)

<6>[ 1700.989779] mmc2: cmd 8 command timeout error

<4>[ 1700.990184] mmc2: card claims to support voltages below the defined range. These will be ignored.

<6>[ 1701.032476] mmc2: new high speed SDIO card at address 0001

<3>[ 1701.223379] [TSP] Calibration!!!!!!

<3>[ 1701.227835] [TSP] ta_status is 0

<3>[ 1701.227868] [TSP] mxt224_ta_probe

<3>[ 1701.230493] [TSP] Calibration End!!!!!!

<3>[ 1701.250466] [TSP]TA_probe MXT224E T48 Byte2 is 66

<3>[ 1701.265462] [TSP]TA_probe MXT224E T48 Byte2 is 98

<3>[ 1701.265806] [TSP] calibration success!!!

<6>[ 1701.266220] +s3cfb_late_resume

<7>[ 1701.266242] s3cfb - enable power domain

<6>[ 1701.266380] s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff

<7>[ 1701.266432] FIMD src sclk = 50000000

<6>[ 1701.266464] s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2

<6>[ 1701.266541] mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI

<6>[ 1701.266651] -s3cfb_late_resume

<6>[ 1701.266675] lcd panel: +ld9040_late_resume

<6>[ 1701.266707] lcd panel: ld9040_power_on

<3>[ 1701.286987] [TSP] Calibration!!!!!!

<3>[ 1701.298989] [TSP] Calibration End!!!!!!

<6>[ 1701.498263] lcd panel: id=0 brightness=31, bl=1, candela=40

<6>[ 1701.498308] lcd panel: -ld9040_late_resume

<6>[ 1701.498348] mdnie mdnie: +mdnie_late_resume

<6>[ 1701.498385] mdnie mdnie: -mdnie_late_resume

<7>[ 1701.498438] [TouchKey] sec_touchkey_late_resume

<6>[ 1701.498942] s5p_gpioint_set_type irq:389 is at GPL0(5)

<7>[ 1701.606064] [TouchKey] touchkey_autocalibration : data[0]=8 data[1]=e data[2]=8 data[3]=0

<7>[ 1701.711264] [Touchkey] autocal disabled, retry 0

<7>[ 1701.711908] [TouchKey] touchkey_autocalibration : data[0]=50 data[1]=e data[2]=8 data[3]=1

<7>[ 1701.816235] [Touchkey] autocal Enabled

<6>[ 1701.860425] lcd panel: id=0 brightness=70, bl=2, candela=70

<3>[ 1701.960533] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1701.960601] [cyasdevice.c] cyasdevice_enter_standby  end mode

<6>[ 1702.030452] cpu1 turning on!

<4>[ 1702.053771] CPU1: Booted secondary processor

<6>[ 1702.054467] cpu1 on

<6>[ 1702.055379] Switched to NOHz mode on CPU #1

<6>[ 1702.057126] lcd panel: id=0 brightness=91, bl=3, candela=90

<6>[ 1702.144645] lcd panel: id=0 brightness=101, bl=4, candela=100

<6>[ 1704.050848] cpu1 turnning off!

<4>[ 1704.052785] IRQ112 no longer affine to CPU1

<5>[ 1704.053930] CPU1: shutdown

<6>[ 1704.057705] cpu1 off!

<6>[ 1710.321146] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1710.325776] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1710.325897] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1710.327666] sec-battery sec-battery: sec_bat_check_temper: temp=320, adc=845

<6>[ 1710.328121] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1710.328361] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1710.328538] sec-battery sec-battery: soc(85), vfocv(4027), vcell(4003), temp(32), charging(2), health(1), chg_adc(0)

<6>[ 1711.016275] request_suspend_state: sleep (0->3) at 1711015871155 (2012-08-03 16:34:46.610572131 UTC)

<7>[ 1711.016577] [TouchKey] sec_touchkey_early_suspend

<6>[ 1711.512424] lcd panel: id=0 brightness=0, bl=0, candela=30

<6>[ 1711.522485] lcd panel: +ld9040_early_suspend

<6>[ 1711.522590] lcd panel: ld9040_power_off

<6>[ 1711.841970] lcd panel: -ld9040_early_suspend

<6>[ 1711.842079] +s3cfb_early_suspend

<7>[ 1711.845810] s3cfb - disable power domain

<6>[ 1711.845925] -s3cfb_early_suspend

<6>[ 1711.954856] suspend: enter suspend

<6>[ 1711.954976] suspend: enter suspend, (2012-08-03 16:34:47.000000000 UTC)

<6>[ 1711.955109] PM: Syncing filesystems ... done.

<6>[ 1711.976080] exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0

<4>[ 1711.976120] Freezing user space processes ... (elapsed 0.02 seconds) done.

<4>[ 1712.000597] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

<4>[ 1712.015523] Suspending console(s) (use no_console_suspend to debug)

<6>[ 1712.065745] max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2012-08-03 16:37:48

<6>[ 1712.377359] IDPRAM : <dpram_power_down:3431> Received MBX_CMD_DPRAM_DOWN (lock count = 0)!!!

<6>[ 1712.377431] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 0

<6>[ 1712.378088] wake enabled for irq 359

<6>[ 1712.378359] USB3803 suspended

<6>[ 1712.378530] sec_jack_suspend: enable_irq_wake(0)

<7>[ 1712.378666] usb: android_work config=  (null),connected=0,sw_connected=0

<6>[ 1712.378704] android_work: did not send uevent (0 0   (null))

<6>[ 1712.379186] exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.

<6>[ 1712.385400] s5p_int_src_ext_hpd()

<6>[ 1712.385551] wake enabled for irq 375

<6>[ 1712.385574] wake enabled for irq 381

<6>[ 1712.385811] mmc2: card 0001 removed

<6>[ 1712.385985] sdhci_suspend_host : Enter WIFI suspend

<6>[ 1712.386052] u1_enable_regulator_for_usb_mipi: disable LDOs

<6>[ 1712.430777] PM: suspend of devices complete after 413.325 msecs

<4>[ 1712.435811] suspend_set_state: LED_A_2.8V: No configuration

<6>[ 1712.440443] power_suspend_late return 0

<6>[ 1712.440475] PM: late suspend of devices complete after 1.576 msecs

<4>[ 1712.440509] Disabling non-boot CPUs ...

<1>[ 1712.440963] PM: SLEEP

<6>[ 2199.000680] WAKEUP_STAT: 0x80000001

<6>[ 2199.000680] WAKEUP_INTx_PEND: 0x0, 0x0, 0x80, 0x0

<6>[ 1712.440840] wakeup wake lock: event1-2067

<6>[ 1712.442163] PM: early resume of devices complete after 1.259 msecs

<6>[ 1712.442613] exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.

<6>[ 1712.442885] mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########

<6>[ 1712.443280] u1_enable_regulator_for_usb_mipi: enable LDOs

<6>[ 1712.445739] wake disabled for irq 375

<6>[ 1712.445765] wake disabled for irq 381

<6>[ 1712.445824] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

<4>[ 1712.446867] usb usb1: root hub lost power or was reset

<6>[ 1712.471534] sec_jack_resume: disable_irq_wake(0)

<6>[ 1712.471763] USB3803 resumed to mode standby

<6>[ 1712.473956] wake disabled for irq 359

<6>[ 1712.480440] IDPRAM : <dpram_power_up:3468> dpram_wakeup_init() ==> QSC_INT = LOW

<6>[ 1712.494874] IDPRAM : <dpram_powerup_start:3440> Received MBX_CMD_CP_WAKEUP_START!!!

<3>[ 1712.665772] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1712.670876] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1712.670963] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<1>[ 1712.671029] _cy_as_device: cy_as_event_misc_awake event callback triggered

<3>[ 1712.680401] [cyasdevice.c] cyasdevice_leave_standby end mode  count=8

<3>[ 1712.696091] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1712.696173] cyasblkdev_stop_sdcard : cy_as_storage_stop is called - found

<3>[ 1712.696342] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1713.129585] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1713.129669] cyasblkdev_start_sdcard : cy_as_storage_start is called

<3>[ 1713.129847] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1713.129928] cyasblkdev_start_sdcard : cy_as_storage_query_media is called - media count = 1

<3>[ 1713.130128] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1713.130225] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1713.130305] cyasblkdev_start_sdcard : cy_as_storage_query_device is called - found

<6>[ 1713.130792] PM: resume of devices complete after 688.341 msecs

<4>[ 1713.131788] Restarting tasks ...

<3>[ 1713.140392] [cyasdevice.c] cy_wq_function:					leave standby

<3>[ 1713.140450] ++++++++++++  [cyasdevice.c] cy_wq_function: SD card is inserted.

<3>[ 1713.140675] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1713.145415] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<6>[ 1713.145458] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1713.145491] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1713.146036] sec-battery sec-battery: sec_bat_check_temper: temp=310, adc=850

<3>[ 1713.146141] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1713.146228] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<6>[ 1713.146313] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1713.146379] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1713.146428] sec-battery sec-battery: soc(85), vfocv(4031), vcell(4035), temp(31), charging(2), health(1), chg_adc(0)

<3>[ 1713.150384] cyasblkdev_check_sdcard : serial num = 0x7b 0xc4 0x42 0x95

<4>[ 1713.162183] done.

<6>[ 1713.162897] exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0

<6>[ 1713.162947] suspend: exit suspend, ret = 0 (2012-08-03 16:36:36.557295000 UTC)

<6>[ 1713.164679] request_suspend_state: wakeup (3->0) at 1713164318696 (2012-08-03 16:36:36.559019667 UTC)

<6>[ 1713.194619] mmc2: cmd 8 command timeout error

<4>[ 1713.194985] mmc2: card claims to support voltages below the defined range. These will be ignored.

<6>[ 1713.237737] mmc2: new high speed SDIO card at address 0001

<3>[ 1713.431121] [TSP] ta_status is 0

<3>[ 1713.431141] [TSP] mxt224_ta_probe

<3>[ 1713.431756] [TSP] Calibration!!!!!!

<3>[ 1713.440447] [TSP] Calibration End!!!!!!

<3>[ 1713.442684] [TSP]TA_probe MXT224E T48 Byte2 is 66

<3>[ 1713.455430] [TSP]TA_probe MXT224E T48 Byte2 is 98

<3>[ 1713.455755] [TSP] calibration success!!!

<6>[ 1713.456150] +s3cfb_late_resume

<7>[ 1713.456166] s3cfb - enable power domain

<6>[ 1713.456283] s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff

<7>[ 1713.456321] FIMD src sclk = 50000000

<6>[ 1713.456343] s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2

<6>[ 1713.456398] mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI

<6>[ 1713.456486] -s3cfb_late_resume

<6>[ 1713.456504] lcd panel: +ld9040_late_resume

<6>[ 1713.456525] lcd panel: ld9040_power_on

<3>[ 1713.488683] [TSP] Calibration!!!!!!

<3>[ 1713.500721] [TSP] Calibration End!!!!!!

<6>[ 1713.688263] lcd panel: id=0 brightness=16, bl=0, candela=30

<6>[ 1713.688309] lcd panel: -ld9040_late_resume

<6>[ 1713.688344] mdnie mdnie: +mdnie_late_resume

<6>[ 1713.688375] mdnie mdnie: -mdnie_late_resume

<7>[ 1713.688425] [TouchKey] sec_touchkey_late_resume

<6>[ 1713.689286] s5p_gpioint_set_type irq:389 is at GPL0(5)

<7>[ 1713.796896] [TouchKey] touchkey_autocalibration : data[0]=8 data[1]=e data[2]=8 data[3]=0

<6>[ 1713.824210] lcd panel: id=0 brightness=31, bl=1, candela=40

<7>[ 1713.901806] [Touchkey] autocal disabled, retry 0

<7>[ 1713.902817] [TouchKey] touchkey_autocalibration : data[0]=50 data[1]=e data[2]=8 data[3]=1

<7>[ 1714.006791] [Touchkey] autocal Enabled

<3>[ 1714.150620] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1714.150734] [cyasdevice.c] cyasdevice_enter_standby  end mode

<6>[ 1714.199072] lcd panel: id=0 brightness=71, bl=2, candela=70

<6>[ 1714.382292] lcd panel: id=0 brightness=91, bl=3, candela=90

<6>[ 1714.476956] lcd panel: id=0 brightness=101, bl=4, candela=100

<6>[ 1714.555477] cpu1 turning on!

<4>[ 1714.579307] CPU1: Booted secondary processor

<6>[ 1714.580187] cpu1 on

<6>[ 1714.580394] Switched to NOHz mode on CPU #1

<6>[ 1716.189298] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1716.189350] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1716.202474] request_suspend_state: sleep (0->3) at 1716202065531 (2012-08-03 16:36:39.596757710 UTC)

<7>[ 1716.202784] [TouchKey] sec_touchkey_early_suspend

<6>[ 1716.575552] cpu1 turnning off!

<4>[ 1716.576811] IRQ112 no longer affine to CPU1

<5>[ 1716.577540] CPU1: shutdown

<6>[ 1716.578959] cpu1 off!

<6>[ 1716.696008] lcd panel: id=0 brightness=0, bl=0, candela=30

<6>[ 1716.707226] lcd panel: +ld9040_early_suspend

<6>[ 1716.707330] lcd panel: ld9040_power_off

<3>[ 1716.762864] [TSP] Dn[0]

<3>[ 1716.782873] [TSP] t: 21, a: 0

<3>[ 1716.783105] [TSP]touch ch > 17

<3>[ 1716.783338] [TSP] calibration success!!!

<3>[ 1716.809752] [TSP] Calibration!!!!!!

<3>[ 1716.823807] [TSP] Calibration End!!!!!!

<3>[ 1716.838034] [TSP] Up[0]

<6>[ 1717.027690] lcd panel: -ld9040_early_suspend

<6>[ 1717.027766] +s3cfb_early_suspend

<7>[ 1717.032878] s3cfb - disable power domain

<6>[ 1717.032948] -s3cfb_early_suspend

<6>[ 1717.256295] suspend: enter suspend

<6>[ 1717.256414] suspend: enter suspend, (2012-08-03 16:36:40.000000000 UTC)

<6>[ 1717.256546] PM: Syncing filesystems ... done.

<6>[ 1717.272138] exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0

<4>[ 1717.272177] Freezing user space processes ... (elapsed 0.02 seconds) done.

<4>[ 1717.295576] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

<4>[ 1717.310531] Suspending console(s) (use no_console_suspend to debug)

<6>[ 1717.360764] max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2012-08-03 16:37:49

<6>[ 1717.652321] IDPRAM : <dpram_power_down:3431> Received MBX_CMD_DPRAM_DOWN (lock count = 0)!!!

<6>[ 1717.652392] IDPRAM : <dpram_suspend:3504> suspend_enter cnt = 0

<6>[ 1717.653051] wake enabled for irq 359

<6>[ 1717.653322] USB3803 suspended

<6>[ 1717.653495] sec_jack_suspend: enable_irq_wake(0)

<7>[ 1717.653629] usb: android_work config=  (null),connected=0,sw_connected=0

<6>[ 1717.653666] android_work: did not send uevent (0 0   (null))

<6>[ 1717.654150] exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc.

<6>[ 1717.660401] s5p_int_src_ext_hpd()

<6>[ 1717.660552] wake enabled for irq 375

<6>[ 1717.660576] wake enabled for irq 381

<6>[ 1717.660807] mmc2: card 0001 removed

<6>[ 1717.660981] sdhci_suspend_host : Enter WIFI suspend

<6>[ 1717.661047] u1_enable_regulator_for_usb_mipi: disable LDOs

<6>[ 1717.705749] PM: suspend of devices complete after 393.299 msecs

<4>[ 1717.710772] suspend_set_state: LED_A_2.8V: No configuration

<6>[ 1717.715345] power_suspend_late return 0

<6>[ 1717.715407] PM: late suspend of devices complete after 1.569 msecs

<4>[ 1717.715441] Disabling non-boot CPUs ...

<1>[ 1717.715870] PM: SLEEP

<6>[ 2199.000680] WAKEUP_STAT: 0x80000001

<6>[ 2199.000680] WAKEUP_INTx_PEND: 0x0, 0x0, 0x80, 0x0

<6>[ 1717.715772] wakeup wake lock: event1-2067

<6>[ 1717.717097] PM: early resume of devices complete after 1.260 msecs

<6>[ 1717.717544] exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc.

<6>[ 1717.717815] mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########

<6>[ 1717.718209] u1_enable_regulator_for_usb_mipi: enable LDOs

<6>[ 1717.720668] wake disabled for irq 375

<6>[ 1717.720694] wake disabled for irq 381

<6>[ 1717.720753] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling

<4>[ 1717.721794] usb usb1: root hub lost power or was reset

<6>[ 1717.746547] sec_jack_resume: disable_irq_wake(0)

<6>[ 1717.746778] USB3803 resumed to mode standby

<6>[ 1717.748970] wake disabled for irq 359

<6>[ 1717.755453] IDPRAM : <dpram_power_up:3468> dpram_wakeup_init() ==> QSC_INT = LOW

<6>[ 1717.756376] IDPRAM : <dpram_powerup_start:3440> Received MBX_CMD_CP_WAKEUP_START!!!

<3>[ 1717.940784] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1717.945887] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1717.945974] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<1>[ 1717.946038] _cy_as_device: cy_as_event_misc_awake event callback triggered

<3>[ 1717.955412] [cyasdevice.c] cyasdevice_leave_standby end mode  count=8

<3>[ 1717.971095] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1717.971177] cyasblkdev_stop_sdcard : cy_as_storage_stop is called - found

<3>[ 1717.971347] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1718.404590] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1718.404675] cyasblkdev_start_sdcard : cy_as_storage_start is called

<3>[ 1718.404855] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1718.404938] cyasblkdev_start_sdcard : cy_as_storage_query_media is called - media count = 1

<3>[ 1718.405139] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1718.405237] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1718.405317] cyasblkdev_start_sdcard : cy_as_storage_query_device is called - found

<6>[ 1718.405801] PM: resume of devices complete after 688.421 msecs

<4>[ 1718.406809] Restarting tasks ...

<3>[ 1718.415405] [cyasdevice.c] cy_wq_function:					leave standby

<3>[ 1718.415463] ++++++++++++  [cyasdevice.c] cy_wq_function: SD card is inserted.

<3>[ 1718.415690] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1718.420427] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<6>[ 1718.420470] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1718.420505] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(2 s)

<6>[ 1718.420553] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1718.421099] sec-battery sec-battery: sec_bat_check_temper: temp=310, adc=853

<3>[ 1718.421204] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1718.421291] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<6>[ 1718.421375] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1718.421441] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1718.421490] sec-battery sec-battery: soc(85), vfocv(4031), vcell(4026), temp(31), charging(2), health(1), chg_adc(0)

<3>[ 1718.425396] cyasblkdev_check_sdcard : serial num = 0x7b 0xc4 0x42 0x95

<6>[ 1718.436934] request_suspend_state: wakeup (3->0) at 1718436556475 (2012-08-03 16:36:48.556255250 UTC)

<4>[ 1718.437029] done.

<6>[ 1718.437717] exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0

<6>[ 1718.437766] suspend: exit suspend, ret = 0 (2012-08-03 16:36:48.557100958 UTC)

<6>[ 1718.469631] mmc2: cmd 8 command timeout error

<4>[ 1718.470000] mmc2: card claims to support voltages below the defined range. These will be ignored.

<6>[ 1718.512762] mmc2: new high speed SDIO card at address 0001

<3>[ 1718.692618] [TSP] ta_status is 0

<3>[ 1718.692637] [TSP] mxt224_ta_probe

<3>[ 1718.693296] [TSP] Calibration!!!!!!

<3>[ 1718.700414] [TSP] Calibration End!!!!!!

<3>[ 1718.712926] [TSP]TA_probe MXT224E T48 Byte2 is 66

<3>[ 1718.716350] [TSP]TA_probe MXT224E T48 Byte2 is 98

<3>[ 1718.716551] [TSP] calibration success!!!

<6>[ 1718.716948] +s3cfb_late_resume

<7>[ 1718.716965] s3cfb - enable power domain

<6>[ 1718.717120] s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff

<7>[ 1718.717162] FIMD src sclk = 50000000

<6>[ 1718.717184] s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2

<6>[ 1718.717245] mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI

<6>[ 1718.717337] -s3cfb_late_resume

<6>[ 1718.717358] lcd panel: +ld9040_late_resume

<6>[ 1718.717379] lcd panel: ld9040_power_on

<3>[ 1718.717800] [TSP] Calibration!!!!!!

<3>[ 1718.728967] [TSP] Calibration End!!!!!!

<6>[ 1718.946106] lcd panel: id=0 brightness=22, bl=0, candela=30

<6>[ 1718.946192] lcd panel: -ld9040_late_resume

<6>[ 1718.946259] mdnie mdnie: +mdnie_late_resume

<6>[ 1718.946318] mdnie mdnie: -mdnie_late_resume

<7>[ 1718.946413] [TouchKey] sec_touchkey_late_resume

<6>[ 1718.947699] s5p_gpioint_set_type irq:389 is at GPL0(5)

<6>[ 1719.027348] lcd panel: id=0 brightness=31, bl=1, candela=40

<7>[ 1719.056561] [TouchKey] touchkey_autocalibration : data[0]=8 data[1]=e data[2]=8 data[3]=0

<7>[ 1719.161803] [Touchkey] autocal disabled, retry 0

<7>[ 1719.162814] [TouchKey] touchkey_autocalibration : data[0]=50 data[1]=e data[2]=8 data[3]=1

<7>[ 1719.267057] [Touchkey] autocal Enabled

<6>[ 1719.405953] lcd panel: id=0 brightness=71, bl=2, candela=70

<3>[ 1719.425558] s5p_gpioint_handler: irq:111 group:10 pend:20 while mask:3f

<3>[ 1719.425624] [cyasdevice.c] cyasdevice_enter_standby  end mode

<3>[ 1719.499299] [TSP] Dn[0]

<3>[ 1719.519756] [TSP] t: 7, a: 0

<3>[ 1719.548911] [TSP] t: 6, a: 0

<3>[ 1719.565601] [TSP] t: 8, a: 0

<6>[ 1719.578766] cpu1 turning on!

<6>[ 1719.581223] lcd panel: id=0 brightness=90, bl=3, candela=90

<3>[ 1719.582367] [TSP] t: 7, a: 0

<6>[ 1719.598320] [VIB] vibrator_work: pwm_config duty=32935

<3>[ 1719.599041] [TSP] t: 6, a: 0

<3>[ 1719.615776] [TSP] t: 7, a: 0

<4>[ 1719.630042] CPU1: Booted secondary processor

<6>[ 1719.630959] cpu1 on

<3>[ 1719.633478] [TSP] t: 5, a: 0

<6>[ 1719.635411] Switched to NOHz mode on CPU #1

<3>[ 1719.650205] [TSP] t: 7, a: 0

<3>[ 1719.666925] [TSP] t: 7, a: 0

<3>[ 1719.683552] [TSP] t: 5, a: 0

<6>[ 1719.698508] lcd panel: id=0 brightness=102, bl=4, candela=100

<3>[ 1719.700215] [TSP] t: 3, a: 0

<3>[ 1719.717013] [TSP] t: 3, a: 0

<3>[ 1719.730505] [TSP] Up[0]

<6>[ 1719.761665] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1720.152589] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1720.152690] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1721.630804] cpu1 turnning off!

<4>[ 1721.632774] IRQ112 no longer affine to CPU1

<5>[ 1721.633919] CPU1: shutdown

<6>[ 1721.636448] cpu1 off!

<3>[ 1722.879574] [TSP] Dn[0]

<3>[ 1722.897569] [TSP] t: 6, a: 0

<3>[ 1722.897834] [TSP] calibration was good

<3>[ 1722.898722] [TSP] ta_status is 0

<6>[ 1722.924451] [VIB] vibrator_work: pwm_config duty=32935

<3>[ 1723.056938] [TSP] Up[0]

<6>[ 1723.158509] audss_clk_enable:ON : CLKSRC[0x1], CLKGATE[0x1c7]

<6>[ 1723.161322] G:P:DmaAddr=@61d60000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000

<7>[ 1723.164596] i2s_txctrl:Turn on

<6>[ 1724.135489] cpu1 turning on!

<4>[ 1724.161688] CPU1: Booted secondary processor

<6>[ 1724.162452] cpu1 on

<6>[ 1724.165419] Switched to NOHz mode on CPU #1

<3>[ 1724.374894] [TSP] Dn[0]

<3>[ 1724.493485] [TSP] Up[0]

<3>[ 1725.500547] [TSP] Dn[0]

<3>[ 1725.618128] [TSP] Up[0]

<6>[ 1726.160564] cpu1 turnning off!

<4>[ 1726.161430] IRQ112 no longer affine to CPU1

<5>[ 1726.161940] CPU1: shutdown

<6>[ 1726.163415] cpu1 off!

<7>[ 1726.250730] i2s_txctrl: Turn Off - spr is no active

<6>[ 1726.251019] audss_clk_enable:OFF: CLKSRC[0x1], CLKGATE[0x1c3]

<3>[ 1726.611154] [TSP] Dn[0]

<3>[ 1726.774561] [TSP] Up[0]

<6>[ 1726.909244] audss_clk_enable:ON : CLKSRC[0x1], CLKGATE[0x1c7]

<6>[ 1726.912437] G:P:DmaAddr=@61d60000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000

<7>[ 1726.916214] i2s_txctrl:Turn on

<6>[ 1727.160486] cpu1 turning on!

<4>[ 1727.185660] CPU1: Booted secondary processor

<6>[ 1727.186367] cpu1 on

<6>[ 1727.190412] Switched to NOHz mode on CPU #1

<6>[ 1727.741444] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1727.742014] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1727.742132] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1727.743113] sec-battery sec-battery: sec_bat_check_temper: temp=310, adc=854

<6>[ 1727.743901] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1727.744143] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1727.744380] sec-battery sec-battery: soc(85), vfocv(4031), vcell(4026), temp(31), charging(2), health(1), chg_adc(0)

<3>[ 1729.056386] [TSP] Dn[0]

<6>[ 1729.185565] cpu1 turnning off!

<4>[ 1729.186796] IRQ112 no longer affine to CPU1

<5>[ 1729.187525] CPU1: shutdown

<6>[ 1729.188996] cpu1 off!

<3>[ 1729.249608] [TSP] Up[0]

<6>[ 1729.685462] cpu1 turning on!

<4>[ 1729.711809] CPU1: Booted secondary processor

<6>[ 1729.713428] cpu1 on

<6>[ 1729.715440] Switched to NOHz mode on CPU #1

<6>[ 1730.789618] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1730.789765] [sec_bat_check_event_status] current batt_event_status = 0x0

<3>[ 1731.707741] [TSP] Dn[0]

<6>[ 1731.710712] cpu1 turnning off!

<4>[ 1731.711944] IRQ112 no longer affine to CPU1

<5>[ 1731.712690] CPU1: shutdown

<6>[ 1731.716262] cpu1 off!

<3>[ 1731.976452] [TSP] Up[0]

<6>[ 1732.215498] cpu1 turning on!

<4>[ 1732.248970] CPU1: Booted secondary processor

<6>[ 1732.249796] cpu1 on

<6>[ 1732.250405] Switched to NOHz mode on CPU #1

<7>[ 1732.486115] i2s_txctrl: Turn Off - spr is no active

<6>[ 1732.486285] audss_clk_enable:OFF: CLKSRC[0x1], CLKGATE[0x1c3]

<3>[ 1732.983654] [TSP] Dn[0]

<6>[ 1733.351526] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1733.351569] [sec_bat_check_event_status] current batt_event_status = 0x40

<3>[ 1733.359329] [TSP] Up[0]

<6>[ 1733.484144] audss_clk_enable:ON : CLKSRC[0x1], CLKGATE[0x1c7]

<6>[ 1733.487382] G:P:DmaAddr=@61d60000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000

<7>[ 1733.490883] i2s_txctrl:Turn on

<6>[ 1734.245548] cpu1 turnning off!

<4>[ 1734.246399] IRQ112 no longer affine to CPU1

<5>[ 1734.246856] CPU1: shutdown

<6>[ 1734.254758] cpu1 off!

<3>[ 1735.588276] [TSP] Dn[0]

<3>[ 1735.751740] [TSP] Up[0]

<6>[ 1736.250626] cpu1 turning on!

<4>[ 1736.270418] CPU1: Booted secondary processor

<6>[ 1736.271444] cpu1 on

<6>[ 1736.275429] Switched to NOHz mode on CPU #1

<7>[ 1736.577055] i2s_txctrl: Turn Off - spr is no active

<6>[ 1736.577448] audss_clk_enable:OFF: CLKSRC[0x1], CLKGATE[0x1c3]

<3>[ 1736.718743] [TSP] Dn[0]

<3>[ 1736.867589] [TSP] Up[0]

<6>[ 1737.765630] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1737.765783] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1737.765817] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1737.766370] sec-battery sec-battery: sec_bat_check_temper: temp=320, adc=845

<6>[ 1737.766574] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1737.766642] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1737.766692] sec-battery sec-battery: soc(85), vfocv(4030), vcell(3994), temp(32), charging(2), health(1), chg_adc(0)

<6>[ 1738.270706] cpu1 turnning off!

<4>[ 1738.272686] IRQ112 no longer affine to CPU1

<5>[ 1738.273850] CPU1: shutdown

<6>[ 1738.276164] cpu1 off!

<3>[ 1742.008838] [TSP] Dn[0]

<3>[ 1742.870311] [TSP] Up[0]

<3>[ 1743.445360] [TSP] Dn[0]

<3>[ 1744.064171] [TSP] Up[0]

<6>[ 1744.099320] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1744.099361] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1744.275635] cpu1 turning on!

<4>[ 1744.302097] CPU1: Booted secondary processor

<6>[ 1744.303376] cpu1 on

<6>[ 1744.305448] Switched to NOHz mode on CPU #1

<3>[ 1745.018078] [TSP] Dn[0]

<3>[ 1745.198334] [TSP] Up[0]

<6>[ 1745.293522] audss_clk_enable:ON : CLKSRC[0x1], CLKGATE[0x1c7]

<6>[ 1745.296182] G:P:DmaAddr=@61d60000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000

<7>[ 1745.299194] i2s_txctrl:Turn on

<6>[ 1745.672379] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1745.672527] [sec_bat_check_event_status] current batt_event_status = 0x40

<6>[ 1746.300784] cpu1 turnning off!

<4>[ 1746.302882] IRQ112 no longer affine to CPU1

<5>[ 1746.303826] CPU1: shutdown

<6>[ 1746.306161] cpu1 off!

<6>[ 1747.806211] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1747.806931] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1747.807051] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1747.808038] sec-battery sec-battery: sec_bat_check_temper: temp=320, adc=836

<6>[ 1747.808494] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1747.808732] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1747.808910] sec-battery sec-battery: soc(85), vfocv(4030), vcell(3967), temp(32), charging(2), health(1), chg_adc(0)

<7>[ 1748.385435] i2s_txctrl: Turn Off - spr is no active

<6>[ 1748.385993] audss_clk_enable:OFF: CLKSRC[0x1], CLKGATE[0x1c3]

<6>[ 1757.846140] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1757.850883] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1757.851004] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1757.852753] sec-battery sec-battery: sec_bat_check_temper: temp=320, adc=827

<6>[ 1757.853199] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1757.853436] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1757.853613] sec-battery sec-battery: soc(85), vfocv(4028), vcell(3998), temp(32), charging(2), health(1), chg_adc(0)

<6>[ 1760.620590] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1760.620735] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1767.881170] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1767.885748] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1767.885874] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(7 s)

<6>[ 1767.886046] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1767.887825] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=813

<6>[ 1767.888273] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1767.888512] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1767.888690] sec-battery sec-battery: soc(85), vfocv(4028), vcell(4022), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1777.811407] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1777.901054] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1777.901704] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1777.901831] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(17 s)

<6>[ 1777.902005] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1777.902982] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=805

<6>[ 1777.903419] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1777.903660] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1777.903838] sec-battery sec-battery: soc(85), vfocv(4028), vcell(4022), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1777.921435] sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=350

<6>[ 1778.217148] max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2

<6>[ 1778.217479] max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437)

<6>[ 1778.217710] max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0

<4>[ 1778.217745] max8997 5-0066: Unused interrupt source: 0x0

<6>[ 1779.164093] logger_release: took 0 msec

<6>[ 1779.287482] [VIB] vibrator_work: pwm_config duty=32935

<3>[ 1780.594661] [TSP] Dn[0]

<3>[ 1780.944661] [TSP] Up[0]

<6>[ 1781.625652] [VIB] vibrator_work: pwm_config duty=32935

<3>[ 1784.303424] [TSP] Dn[0]

<3>[ 1784.496725] [TSP] Up[0]

<6>[ 1784.570502] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(1)

<7>[ 1784.570562] [sec_bat_check_event_status] current batt_event_status = 0x40

<3>[ 1784.989022] [TSP] Dn[0]

<3>[ 1785.167887] [TSP] Up[0]

<3>[ 1785.960033] [TSP] Dn[0]

<3>[ 1786.077772] [TSP] Up[0]

<6>[ 1786.217838] audss_clk_enable:ON : CLKSRC[0x1], CLKGATE[0x1c7]

<6>[ 1786.219531] G:P:DmaAddr=@61d60000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffdc0000

<7>[ 1786.221503] i2s_txctrl:Turn on

<6>[ 1786.305472] cpu1 turning on!

<4>[ 1786.321828] CPU1: Booted secondary processor

<6>[ 1786.324635] cpu1 on

<6>[ 1786.325402] Switched to NOHz mode on CPU #1

<3>[ 1787.549953] [TSP] Dn[0]

<3>[ 1787.712445] [TSP] Up[0]

<6>[ 1787.835816] sec-battery sec-battery: [NA_SPR]sec_bat_store: DATA CALL(0)

<7>[ 1787.835858] [sec_bat_check_event_status] current batt_event_status = 0x0

<6>[ 1787.920606] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1787.920737] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1787.920765] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(0 s)

<6>[ 1787.920806] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1787.921320] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=800

<6>[ 1787.921501] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1787.921559] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1787.921599] sec-battery sec-battery: soc(85), vfocv(4028), vcell(4014), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1788.320493] cpu1 turnning off!

<4>[ 1788.320990] IRQ112 no longer affine to CPU1

<5>[ 1788.321690] CPU1: shutdown

<6>[ 1788.325458] cpu1 off!

<6>[ 1789.594722] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1789.825553] cpu1 turning on!

<4>[ 1789.847874] CPU1: Booted secondary processor

<6>[ 1789.848703] cpu1 on

<6>[ 1789.850418] Switched to NOHz mode on CPU #1

<6>[ 1791.845716] cpu1 turnning off!

<4>[ 1791.847723] IRQ112 no longer affine to CPU1

<5>[ 1791.848846] CPU1: shutdown

<6>[ 1791.852957] cpu1 off!

<3>[ 1792.241636] [TSP] Dn[0]

<3>[ 1792.404165] [TSP] Up[0]

<3>[ 1794.447387] [TSP] Dn[0]

<3>[ 1794.609924] [TSP] Up[0]

<6>[ 1796.498466] [VIB] vibrator_work: pwm_config duty=32935

<6>[ 1797.825820] [VIB] vibrator_work: pwm_config duty=32935

<7>[ 1797.850212] i2s_txctrl: Turn Off - spr is no active

<6>[ 1797.850817] audss_clk_enable:OFF: CLKSRC[0x1], CLKGATE[0x1c3]

<6>[ 1797.941017] sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)

<6>[ 1797.941624] sec_bat_get_lpcharging_state: LP charging:0

<6>[ 1797.941754] sec-battery sec-battery: [SPR_NA] is_event_end_timer_running: Event timer is running(10 s)

<6>[ 1797.941937] sec-battery sec-battery: sec_bat_check_temper: [NA_SPR] Changed Put off Current

<6>[ 1797.942915] sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=797

<6>[ 1797.943394] sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing

<6>[ 1797.943718] max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3

<6>[ 1797.943898] sec-battery sec-battery: soc(85), vfocv(4028), vcell(3932), temp(34), charging(2), health(1), chg_adc(0)

<6>[ 1798.350469] cpu1 turning on!

<4>[ 1798.374652] CPU1: Booted secondary processor

<6>[ 1798.375401] Switched to NOHz mode on CPU #1

<6>[ 1798.375434] cpu1 on

<6>[ 1798.793472] [VIB] vibrator_work: pwm_config duty=32935

<1>[ 1800.055900] Unable to handle kernel NULL pointer dereference at virtual address 00000028

<1>[ 1800.055966] pgd = dfba4000

<1>[ 1800.055995] [00000028] *pgd=00000000

<0>[ 1800.056036] Internal error: Oops: 5 [#1] PREEMPT SMP

<4>[ 1800.056080] Modules linked in: j4fs(P) [last unloaded: dhd]

<4>[ 1800.056142] CPU: 0    Tainted: P        W    (3.0.36-AOSP-g60517f2-dirty #1)

<4>[ 1800.056216] PC is at print_lock_stat+0x18/0x168

<4>[ 1800.056264] LR is at wakelock_stats_show+0x48/0xb0

<4>[ 1800.056312] pc : [<c0155cc4>]    lr : [<c0155e5c>]    psr: 00010093

<4>[ 1800.056354] sp : dfc63e00  ip : dfc63e98  fp : dfc63e94

<4>[ 1800.056399] r10: dfc63ed0  r9 : 422af818  r8 : 00010013

<4>[ 1800.056444] r7 : 00000000  r6 : dfcfce40  r5 : c082ffd0  r4 : 00000000

<4>[ 1800.056498] r3 : 00000600  r2 : 00001000  r1 : 00000000  r0 : dfcfce40

<4>[ 1800.056552] Flags: nzcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user

<4>[ 1800.056611] Control: 10c5387d  Table: 5fba404a  DAC: 00000015

<4>[ 1800.056658]

<4>[ 1800.056671] PC: 0xc0155c44:

<4>[ 1800.056697] 5c44  ebff1d8d e51b302c e24b003c e51b1034 e51bc030 e0811003 e51b3028 e08cc003

<4>[ 1800.056790] 5c64  e51b3020 e063c00c e51b3024 e1a0200c e0631001 e1a03fcc ebff1d28 e51b003c

<4>[ 1800.056882] 5c84  e3a03000 e51b2038 e59f1014 e0e32091 e3a00001 e1c420f0 e24bd014 e89da830

<4>[ 1800.056973] 5ca4  c07f2080 3b9aca00 e1a0c00d e92ddff0 e24cb004 e24dd06c e92d4000 e8bd4000

<4>[ 1800.057065] 5cc4  e1c122d8 e1c183d8 e1a0a000 e1a04001 e5916018 e14b24fc e1c123d0 e591501c

<4>[ 1800.057156] 5ce4  e14b85f4 e14b25fc e5913008 e3130c02 0a00002d e1a00001 e24b1034 ebffffb7

<4>[ 1800.057248] 5d04  e2507000 1a000003 e24b003c ebffb2b1 e14b23dc e14b23f4 e14b83d4 e2866001

<4>[ 1800.057339] 5d24  e1c424d0 e1a00008 e1a01009 e0500002 e0c11003 e3570000 e14b86f4 13a02000

<4>[ 1800.057432]

<4>[ 1800.057445] LR: 0xc0155ddc:

<4>[ 1800.057470] 5ddc  e1cd20f8 e14b25dc e58d5000 e1cd82f0 e1cd21f8 e1c424d0 e1cd22f8 e1a03006

<4>[ 1800.057563] 5dfc  e594200c eb0229f6 e24bd028 e89daff0 c0912060 c075ba21 e1a0c00d e92dddf0

<4>[ 1800.057653] 5e1c  e24cb004 e92d4000 e8bd4000 e1a06000 e59f5080 e2850004 eb134fbc e59f1078

<4>[ 1800.057746] 5e3c  e1a08000 e1a00006 eb02285d e5b54210 ea000003 e1a01004 e1a00006 ebffff93

<4>[ 1800.057837] 5e5c  e5944000 e1540005 1afffff9 e59f704c e3a04000 e087a184 e7975184 ea000003

<4>[ 1800.057928] 5e7c  e1a01005 e1a00006 ebffff88 e5955000 e155000a 1afffff9 e2844001 e3540002

<4>[ 1800.058019] 5e9c  1afffff3 e59f0018 e1a01008 eb134ea7 e3a00000 e89dadf0 c082fdc0 c075ba49

<4>[ 1800.058110] 5ebc  c0912188 c082fdc4 e1a0c00d e92dd8f0 e24cb004 e24dd010 e92d4000 e8bd4000

<4>[ 1800.058202]

<4>[ 1800.058215] SP: 0xdfc63d80:

<4>[ 1800.058242] 3d80  dfc63e30 c02d2cd4 00000002 0000000a ffffffff ffffffff 0000040f 00000005

<4>[ 1800.058331] 3da0  dfcfce40 00000000 dfc63e94 dfc63db8 c00d9b10 c00d4188 dfcfce40 00000000

<4>[ 1800.058422] 3dc0  00001000 00000600 00000000 c082ffd0 dfcfce40 00000000 00010013 422af818

<4>[ 1800.058511] 3de0  dfc63ed0 dfc63e94 dfc63e98 dfc63e00 c0155e5c c0155cc4 00010093 ffffffff

<4>[ 1800.058602] 3e00  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

<4>[ 1800.058689] 3e20  00000000 00000000 00000000 00000000 00000000 dfc63eec 00000000 00000000

<4>[ 1800.058776] 3e40  00000000 00000000 00000000 00000000 00000000 00000000 0000005b c075ba49

<4>[ 1800.058864] 3e60  00000000 00010013 422af818 00000000 c082ffd0 dfcfce40 00000000 00010013

<4>[ 1800.058955]

<4>[ 1800.058968] IP: 0xdfc63e18:

<4>[ 1800.058993] 3e18  00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfc63eec

<4>[ 1800.059080] 3e38  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

<4>[ 1800.059167] 3e58  0000005b c075ba49 00000000 00010013 422af818 00000000 c082ffd0 dfcfce40

<4>[ 1800.059257] 3e78  00000000 00010013 422af818 dfc63ed0 dfc63ebc dfc63e98 c0155e5c c0155cb8

<4>[ 1800.059348] 3e98  dfcfce40 00000001 00000001 00000000 00002000 dfc63ed0 dfc63f0c dfc63ec0

<4>[ 1800.059436] 3eb8  c01e0948 c0155e20 00000003 dfcfce68 d5beea80 dfc63f78 00000000 00000000

<4>[ 1800.059526] 3ed8  c0629c0c c02d7b94 e149f950 e1901500 c01e0764 d5beea80 00002000 422af818

<4>[ 1800.059616] 3ef8  e1901548 dfc63f78 dfc63f3c dfc63f10 c0205f90 c01e0770 dfc63f78 00002000

<4>[ 1800.059707]

<4>[ 1800.059721] FP: 0xdfc63e14:

<4>[ 1800.059747] 3e14  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

<4>[ 1800.059833] 3e34  dfc63eec 00000000 00000000 00000000 00000000 00000000 00000000 00000000

<4>[ 1800.059921] 3e54  00000000 0000005b c075ba49 00000000 00010013 422af818 00000000 c082ffd0

<4>[ 1800.060011] 3e74  dfcfce40 00000000 00010013 422af818 dfc63ed0 dfc63ebc dfc63e98 c0155e5c

<4>[ 1800.060103] 3e94  c0155cb8 dfcfce40 00000001 00000001 00000000 00002000 dfc63ed0 dfc63f0c

<4>[ 1800.060193] 3eb4  dfc63ec0 c01e0948 c0155e20 00000003 dfcfce68 d5beea80 dfc63f78 00000000

<4>[ 1800.060283] 3ed4  00000000 c0629c0c c02d7b94 e149f950 e1901500 c01e0764 d5beea80 00002000

<4>[ 1800.060373] 3ef4  422af818 e1901548 dfc63f78 dfc63f3c dfc63f10 c0205f90 c01e0770 dfc63f78

<4>[ 1800.060465]

<4>[ 1800.060478] R0: 0xdfcfcdc0:

<4>[ 1800.060503] cdc0  dfcfcdbc 00000000 00000000 00000000 00000000 00000000 00000000 00000000

<4>[ 1800.060589] cde0  000c5959 dfcfcde4 dfcfcde4 00000003 e07b2491 dfb302b0 dfcfc4f0 e03e2e00

<4>[ 1800.060674] ce00  d7e9081c 00000001 00000000 00000000 514f4c20 504beaa0 00001fe5 dfcfce1c

<4>[ 1800.060759] ce20  dfcfce1c 00000000 00000000 00000000 00000000 00000000 00000000 00000000

<4>[ 1800.060842] ce40  e0503000 00001000 00000000 00000600 00000000 00000000 00000000 00000000

<4>[ 1800.060925] ce60  00000000 00000000 00000000 00000000 00000000 dead4ead ffffffff ffffffff

<4>[ 1800.061009] ce80  dfcfce80 dfcfce80 dfb83480 00000000 dfcfce68 d3a3b0c0 00000000 00000000

<4>[ 1800.061094] cea0  00000001 00000000 dfcfc900 dfcfceac dfcfceac ffffffff dfb27900 0000006a

<4>[ 1800.061182]

<4>[ 1800.061195] R5: 0xc082ff50:

<4>[ 1800.061219] ff50  00000000 00000000 ffff15ac 00000000 00000000 00000000 00000000 00000000

<4>[ 1800.061301] ff70  00000000 c082ff74 c082ff74 00000000 00000000 00000000 00000000 00000000

<4>[ 1800.061384] ff90  dead4ead ffffffff ffffffff c082ff9c c082ff9c 00000000 00000000 00000000

<4>[ 1800.061469] ffb0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

<4>[ 1800.061551] ffd0  e028b020 c0912060 00000200 c082ffdc c082ffdc c0156824 00000000 00200200

<4>[ 1800.061637] fff0  00045782 c090ecc0 c01560c0 00000000 ffffffff 00000000 00000000 00000000

<4>[ 1800.061722] 0010  00000000 00000000 00000000 00000000 00000000 00000000 c01567bc 00000000

<4>[ 1800.061805] 0030  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

<4>[ 1800.061888]

<4>[ 1800.061901] R6: 0xdfcfcdc0:

<4>[ 1800.061925] cdc0  dfcfcdbc 00000000 00000000 00000000 00000000 00000000 00000000 00000000

<4>[ 1800.062007] cde0  000c5959 dfcfcde4 dfcfcde4 00000003 e07b2491 dfb302b0 dfcfc4f0 e03e2e00

<4>[ 1800.062093] ce00  d7e9081c 00000001 00000000 00000000 514f4c20 504beaa0 00001fe5 dfcfce1c

<4>[ 1800.062178] ce20  dfcfce1c 00000000 00000000 00000000 00000000 00000000 00000000 00000000

<4>[ 1800.062260] ce40  e0503000 00001000 00000000 00000600 00000000 00000000 00000000 00000000

<4>[ 1800.062343] ce60  00000000 00000000 00000000 00000000 00000000 dead4ead ffffffff ffffffff

<4>[ 1800.062427] ce80  dfcfce80 dfcfce80 dfb83480 00000000 dfcfce68 d3a3b0c0 00000000 00000000

<4>[ 1800.062513] cea0  00000001 00000000 dfcfc900 dfcfceac dfcfceac ffffffff dfb27900 0000006a

<4>[ 1800.062600]

<4>[ 1800.062612] R10: 0xdfc63e50:

<4>[ 1800.062637] 3e50  00000000 00000000 0000005b c075ba49 00000000 00010013 422af818 00000000

<4>[ 1800.062721] 3e70  c082ffd0 dfcfce40 00000000 00010013 422af818 dfc63ed0 dfc63ebc dfc63e98

<4>[ 1800.062807] 3e90  c0155e5c c0155cb8 dfcfce40 00000001 00000001 00000000 00002000 dfc63ed0

<4>[ 1800.062892] 3eb0  dfc63f0c dfc63ec0 c01e0948 c0155e20 00000003 dfcfce68 d5beea80 dfc63f78

<4>[ 1800.062978] 3ed0  00000000 00000000 c0629c0c c02d7b94 e149f950 e1901500 c01e0764 d5beea80

<4>[ 1800.063063] 3ef0  00002000 422af818 e1901548 dfc63f78 dfc63f3c dfc63f10 c0205f90 c01e0770

<4>[ 1800.063149] 3f10  dfc63f78 00002000 d5beea80 422af818 dfc63f78 00000000 00000000 00000000

<4>[ 1800.063233] 3f30  dfc63f6c dfc63f40 c01c1e84 c0205f0c dfc63f6c dfc63f50 c01c3544 d5beea80

<0>[ 1800.063325] Process ProcessStats (pid: 2087, stack limit = 0xdfc622f0)

<0>[ 1800.063374] Stack: (0xdfc63e00 to 0xdfc64000)

<0>[ 1800.063417] 3e00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

<0>[ 1800.063480] 3e20: 00000000 00000000 00000000 00000000 00000000 dfc63eec 00000000 00000000

<0>[ 1800.063543] 3e40: 00000000 00000000 00000000 00000000 00000000 00000000 0000005b c075ba49

<0>[ 1800.063607] 3e60: 00000000 00010013 422af818 00000000 c082ffd0 dfcfce40 00000000 00010013

<0>[ 1800.063673] 3e80: 422af818 dfc63ed0 dfc63ebc dfc63e98 c0155e5c c0155cb8 dfcfce40 00000001

<0>[ 1800.063738] 3ea0: 00000001 00000000 00002000 dfc63ed0 dfc63f0c dfc63ec0 c01e0948 c0155e20

<0>[ 1800.063802] 3ec0: 00000003 dfcfce68 d5beea80 dfc63f78 00000000 00000000 c0629c0c c02d7b94

<0>[ 1800.063868] 3ee0: e149f950 e1901500 c01e0764 d5beea80 00002000 422af818 e1901548 dfc63f78

<0>[ 1800.063934] 3f00: dfc63f3c dfc63f10 c0205f90 c01e0770 dfc63f78 00002000 d5beea80 422af818

<0>[ 1800.063999] 3f20: dfc63f78 00000000 00000000 00000000 dfc63f6c dfc63f40 c01c1e84 c0205f0c

<0>[ 1800.064063] 3f40: dfc63f6c dfc63f50 c01c3544 d5beea80 422af818 00002000 00000003 00000000

<0>[ 1800.064128] 3f60: dfc63fa4 dfc63f70 c01c1f4c c01c1dd0 501bfe72 00000001 00000000 00000000

<0>[ 1800.064193] 3f80: 00000400 51816fa8 00000068 00000000 c00da428 dfc62000 00000000 dfc63fa8

<0>[ 1800.064258] 3fa0: c00da1c0 c01c1f0c 51816fa8 00000068 00000068 422af818 00002000 422af818

<0>[ 1800.064323] 3fc0: 51816fa8 00000068 00000000 00000003 ffffffff 4fbefcb0 5194f900 52fd4c94

<0>[ 1800.064388] 3fe0: 41513884 52fd4c48 414fb151 400d995c 00010010 00000068 00000000 00000000

<4>[ 1800.064443] Backtrace:

<4>[ 1800.064491] [<c0155cac>] (print_lock_stat+0x0/0x168) from [<c0155e5c>] (wakelock_stats_show+0x48/0xb0)

<4>[ 1800.064575] [<c0155e14>] (wakelock_stats_show+0x0/0xb0) from [<c01e0948>] (seq_read+0x1e4/0x444)

<4>[ 1800.064651] [<c01e0764>] (seq_read+0x0/0x444) from [<c0205f90>] (proc_reg_read+0x90/0xa4)

<4>[ 1800.064723] [<c0205f00>] (proc_reg_read+0x0/0xa4) from [<c01c1e84>] (vfs_read+0xc0/0x13c)

<4>[ 1800.064789] [<c01c1dc4>] (vfs_read+0x0/0x13c) from [<c01c1f4c>] (sys_read+0x4c/0x78)

<4>[ 1800.064843]  r8:00000000 r7:00000003 r6:00002000 r5:422af818 r4:d5beea80

<4>[ 1800.064927] [<c01c1f00>] (sys_read+0x0/0x78) from [<c00da1c0>] (ret_fast_syscall+0x0/0x30)

<4>[ 1800.064984]  r9:dfc62000 r8:c00da428 r6:00000000 r5:00000068 r4:51816fa8

<0>[ 1800.065063] Code: e24cb004 e24dd06c e92d4000 e8bd4000 (e1c122d8)

<4>[ 1800.065226] ---[ end trace 7dd2895b3998d232 ]---

<0>[ 1800.065353] Kernel panic - not syncing: Fatal exception

<4>[ 1800.065423] Backtrace:

<4>[ 1800.065478] [<c00de520>] (dump_backtrace+0x0/0x118) from [<c0622038>] (dump_stack+0x20/0x24)

<4>[ 1800.065537]  r6:dfc622f0 r5:dfb83480 r4:c08ce1e8 r3:00000002

<4>[ 1800.065612] [<c0622018>] (dump_stack+0x0/0x24) from [<c0622388>] (panic+0x7c/0x1a8)

<4>[ 1800.065679] [<c062230c>] (panic+0x0/0x1a8) from [<c00de9ec>] (die+0x18c/0x1d0)

<4>[ 1800.065730]  r3:00000001 r2:dfc63c20 r1:c0000040 r0:c074dc19

<4>[ 1800.065791]  r7:00000001

<4>[ 1800.065834] [<c00de860>] (die+0x0/0x1d0) from [<c06220a0>] (__do_kernel_fault.part.2+0x64/0x84)

<4>[ 1800.065893]  r8:e18c0380 r7:dfc63db8 r6:e18c0380 r5:00000005 r4:00000028

<4>[ 1800.065980] [<c062203c>] (__do_kernel_fault.part.2+0x0/0x84) from [<c00e47c0>] (do_page_fault+0x28c/0x2ac)

<4>[ 1800.066045]  r7:dfb83480 r3:dfc63db8

<4>[ 1800.066098] [<c00e4534>] (do_page_fault+0x0/0x2ac) from [<c00e489c>] (do_translation_fault+0x2c/0xb0)

<4>[ 1800.066177] [<c00e4870>] (do_translation_fault+0x0/0xb0) from [<c00d41c0>] (do_DataAbort+0x44/0xa8)

<4>[ 1800.066239]  r7:dfc63db8 r6:00000028 r5:c0814018 r4:00000005

<4>[ 1800.066312] [<c00d417c>] (do_DataAbort+0x0/0xa8) from [<c00d9b10>] (__dabt_svc+0x70/0xa0)

<4>[ 1800.066371] Exception stack(0xdfc63db8 to 0xdfc63e00)

<4>[ 1800.066413] 3da0:                                                       dfcfce40 00000000

<4>[ 1800.066480] 3dc0: 00001000 00000600 00000000 c082ffd0 dfcfce40 00000000 00010013 422af818

<4>[ 1800.066548] 3de0: dfc63ed0 dfc63e94 dfc63e98 dfc63e00 c0155e5c c0155cc4 00010093 ffffffff

<4>[ 1800.066605]  r7:00000000 r6:dfcfce40 r5:00000005 r4:0000040f

<4>[ 1800.066685] [<c0155cac>] (print_lock_stat+0x0/0x168) from [<c0155e5c>] (wakelock_stats_show+0x48/0xb0)

<4>[ 1800.066765] [<c0155e14>] (wakelock_stats_show+0x0/0xb0) from [<c01e0948>] (seq_read+0x1e4/0x444)

<4>[ 1800.066839] [<c01e0764>] (seq_read+0x0/0x444) from [<c0205f90>] (proc_reg_read+0x90/0xa4)

<4>[ 1800.066907] [<c0205f00>] (proc_reg_read+0x0/0xa4) from [<c01c1e84>] (vfs_read+0xc0/0x13c)

<4>[ 1800.066974] [<c01c1dc4>] (vfs_read+0x0/0x13c) from [<c01c1f4c>] (sys_read+0x4c/0x78)

<4>[ 1800.067028]  r8:00000000 r7:00000003 r6:00002000 r5:422af818 r4:d5beea80

<4>[ 1800.067112] [<c01c1f00>] (sys_read+0x0/0x78) from [<c00da1c0>] (ret_fast_syscall+0x0/0x30)

<4>[ 1800.067169]  r9:dfc62000 r8:c00da428 r6:00000000 r5:00000068 r4:51816fa8

<2>[ 1800.067334] CPU1: stopping

<4>[ 1800.067360] Backtrace:

<4>[ 1800.067410] [<c00de520>] (dump_backtrace+0x0/0x118) from [<c0622038>] (dump_stack+0x20/0x24)

<4>[ 1800.067470]  r6:00000006 r5:00000001 r4:00000000 r3:00000000

<4>[ 1800.067545] [<c0622018>] (dump_stack+0x0/0x24) from [<c00d4550>] (do_IPI+0x108/0x25c)

<4>[ 1800.067612] [<c00d4448>] (do_IPI+0x0/0x25c) from [<c00d9bc0>] (__irq_svc+0x80/0x124)

<4>[ 1800.067669] Exception stack(0xe189ff18 to 0xe189ff60)

<4>[ 1800.067711] ff00:                                                       0002d92c 00000fa0

<4>[ 1800.067775] ff20: 00000000 00000174 c08cb8c8 00000000 00000001 c08cb34c 00000000 412fc091

<4>[ 1800.067841] ff40: 00000001 e189ff8c 0b2056bc e189ff60 c0142aa0 c00ef794 200f0013 ffffffff

<4>[ 1800.067897]  r7:00000002 r6:00000006 r5:f8818000 r4:ffffffff

<4>[ 1800.067976] [<c00ef648>] (exynos4_enter_idle+0x0/0x188) from [<c042851c>] (cpuidle_idle_call+0x1f4/0x390)

<4>[ 1800.068042]  r6:c146b1c8 r5:c08cb244 r4:c146b1b8

<4>[ 1800.068104] [<c0428328>] (cpuidle_idle_call+0x0/0x390) from [<c00db6f8>] (cpu_idle+0x94/0xf8)

<4>[ 1800.068175] [<c00db664>] (cpu_idle+0x0/0xf8) from [<c061ecfc>] (secondary_start_kernel+0x15c/0x17c)

<4>[ 1800.068238]  r6:10c0387d r5:c0837f58 r4:00000002 r3:c080b76c

<4>[ 1800.068308] [<c061eba0>] (secondary_start_kernel+0x0/0x17c) from [<4061e614>] (0x4061e614)

<4>[ 1800.068366]  r5:00000015 r4:53c3c06a

<0>[ 1800.068411] Rebooting in 1 seconds..

<0>[ 1801.068658] sec_reboot (104, (null))

Ibl: pbl_read_emmc441() read 8k

Ibl: pbl_read_emmc441() read 96k

Ibl: pbl_read_emmc441() read download info

Ibl: pbl_read_emmc441() endop

Ibl: jump() verify_binary_integrity...ok

Ibl: jump() jump!!!



Welcome to Samsung Primitive Bootloader.

build time: Jul 30 2011 23:56:28

current time: 0/1/5 13:51:45



[set_mmc_ocr] Sector Mode

[hsmmc_init] MMC card is detected

Product Name : MAG2GA

<display_card_info:1009> ext_csd

<display_card_info:1011>card_size: 15028

 Total Card Size: 15029 MByte



mmc_init: card initialization completed!

pbl found bootable sbl in #53248.

jump to sbl 0x4d400000.

success

<start_checksum:1033>CHECKSUM_HEADER_SECTOR :42

<start_checksum:1035>offset:42, size:1024

Not Need Movinand Checksum

load_lfs_parameters valid magic code and version.

switch_sel_str='1'

load_debug_level: read debug level successfully(0x574f4c44)...LOW

init_ddi_data: usable ddi data.

init_fuel_gauge : not por status

fuel_gauge_get_version: [1]=0, [0]=92

init_fuel_gauge: vcell = 3982 mV, vfocv = 4026 mV, soc = 82

init_fuel_gauge : check s/w reset (20000000) : use wide tolerance

microusb_get_attached_device: STATUS1:0x3f, 2:0x0

8187 = (396200 - 337808)*14022/100000

[2] 401016 = (8187 * 100000) / 16565 + 351593

initialize USB 2.0 Compatible 3-Port Hub(USB3803).

EXT_I2C(3) -> No ACK

EXT_I2C(3) -> No ACK

EXT_I2C(3) -> No ACK

read  SP_ILOCK_REG : 0x2

read  SP_ILOCK_REG : 0x3

read  CFGP_REG : 0x10 (default)

read  CFGP_REG : 0x90

[usb_i2c_init] read  PDS_REG : 0x0 (default)

[usb_i2c_init] read  PDS_REG : 0x6

read  CFG1_REG : 0x1b (default)

read  CFG1_REG : 0x9b

read  SP_ILOCK_REG : 0x0

reading nps status file is successfully!.

nps status=0x504d4f43

PMIC_IRQSRC  = 0x0

PMIC_IRQ1    = 0x0

PMIC_IRQ2    = 0x18

PMIC_IRQ3    = 0x0

PMIC_IRQ4    = 0x11

PMIC_STATUS1 = 0x0

PMIC_STATUS2 = 0x16

PMIC_STATUS3 = 0x3

PMIC_STATUS4 = 0x0

bootloader base address=0x4d400000

LPDDR0 1st. cached=0x40000000, size=0xe400000

LPDDR0 non-cached=0x4e400000, size=0xa00000

LPDDR0 2nd. cached=0x4ee00000, size=0x1200000

RST_STAT = 0x20000000

get_hwrev() = 12

board_process_platform: MAGIC 66262564 at 40000000!

board_process_platform: debug level is 574f4c44!

board_process_platform: level low or unknown: skip 70

scan_keypad_level: pressed key is 3

scan_keypad_level: pressed key is 3

scan_keypad_level: pressed key is 3

scan_keypad_level: pressed key is 3

check_reboot: INFORM3 = 12345670

microusb_get_attached_device: STATUS1:0x3f, 2:0x0

microusb_get_attached_device: STATUS1:0x3f, 2:0x0

microusb_get_attached_device: STATUS1:0x3f, 2:0x0

microusb_get_attached_device: STATUS1:0x3f, 2:0x0

hw_pm_status: jig_status = 0, chg_status = 0

AST_POWERON..

DISPLAY_PATH_SEL[MDNIE 0x1]is on

div:2, FB_SOURCE_CLOCK:667000000, FB_PIXEL_CLOCK:25067520

MDNIE setting Init start!!

vsync interrupt is off

video interrupt is off

[fb0] turn on

MDNIE setting Init end!!



Autoboot (0 seconds) in progress, press any key to stop

boot_kernel: debug level low!

checkbit: find RECOVERY

checkbit (0)

......kernel is non signed binary.

ATAG_CORE: 5 54410001 0 0 0

MEMCONFIG: 20e01323 20e01323

ATAG_MEM: 4 54410002 10000000 40000000

ATAG_MEM: 4 54410002 10000000 50000000

ATAG_MEM: 4 54410002 10000000 60000000

ATAG_MEM: 4 54410002 10000000 70000000

ATAG_SERIAL: 4 54410006 1b05606f 47410e0d

ATAG_REVISION: 3 54410007 c

ATAG_CMDLINE: 3a 54410009 'loglevel=4 console=ram sec_debug.enable=0 sec_debug.enable_user=0 c1_watchdog.sec_pet=5 sec_log=0x200000@0x5ea00000 s3cfb.bootloaderfb=0x5ec00000 ld9040.get_lcdtype=0x0 consoleblank=0 lpj=3981312 vmalloc=144m console=ram'

ATAG_NONE: 0 0



Starting kernel at 0x40008000...