Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- registers
- <7>[11036.234158] c0 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3
- <7>[11036.234191] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11036.234219] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11036.234246] c0 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
- <7>[11036.234281] c0 s5p-ohci s5p-ohci: hcca frame #0005
- <7>[11036.234308] c0 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11036.234341] c0 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11036.234371] c0 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11036.234402] c0 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11036.234434] c0 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11036.234467] c0 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <7>[11036.234538] c0 usb usb1: default language 0x0409
- <7>[11036.234576] c0 usb usb1: udev 1, busnum 1, minor = 0
- <6>[11036.234602] c0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- <6>[11036.234636] c0 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[11036.234669] c0 usb usb1: Product: s5p OHCI
- <6>[11036.234689] c0 usb usb1: Manufacturer: Linux 3.0.31-1665483 ohci_hcd
- <6>[11036.234719] c0 usb usb1: SerialNumber: s5p-ohci
- <6>[11036.234744] c0 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11036.236783] c0 usb usb1: usb_probe_device
- <7>[11036.236812] c0 usb usb1: configuration #1 chosen from 1 choice
- <7>[11036.236866] c0 usb usb1: adding 1-0:1.0 (config #1, interface 0)
- <7>[11036.237165] c0 hub 1-0:1.0: usb_probe_interface
- <7>[11036.237191] c0 hub 1-0:1.0: usb_probe_interface - got id
- <6>[11036.237220] c0 hub 1-0:1.0: USB hub found
- <6>[11036.237252] c0 hub 1-0:1.0: 3 ports detected
- <7>[11036.237274] c0 hub 1-0:1.0: standalone hub
- <7>[11036.237293] c0 hub 1-0:1.0: no power switching (usb 1.0)
- <7>[11036.237317] c0 hub 1-0:1.0: global over-current protection
- <7>[11036.237342] c0 hub 1-0:1.0: power on to power good time: 4ms
- <7>[11036.237375] c0 hub 1-0:1.0: local power source is good
- <7>[11036.237398] c0 hub 1-0:1.0: no over-current condition exists
- <7>[11036.237425] c0 hub 1-0:1.0: trying to enable port power on non-switchable hub
- <7>[11036.237753] c0 drivers/usb/core/inode.c: creating file '001'
- <7>[11036.335112] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[11036.600734] c0 max77686: id=27, org=39, val=32
- <7>[11036.650648] c0 max77686: id=27, org=32, val=39
- <7>[11036.810714] c0 max77686: id=27, org=39, val=32!@[ps] Screen__Off(2) : timeout (0x4)
- <6>[11037.084194] c1 [SSP]: show_sensors_enable - cur_enable = 65
- <6>[11037.084244] c1 [SSP]: set_sensors_enable - new_enable = 1, old_enable = 65
- <6>[11037.084275] c1 [SSP]: ssp_remove_sensor - remove sensor = 64, current state = 1
- <6>[11037.085274] c0 [SSP]: send_instruction - Inst = 0xa2, Sensor Type = 0x6, data = 3
- <6>[11037.085684] c0 [SSP]: show_sensors_enable - cur_enable = 1
- <6>[11037.085726] c0 [SSP]: set_sensors_enable - new_enable = 0, old_enable = 1
- <6>[11037.085756] c0 [SSP]: ssp_remove_sensor - remove sensor = 1, current state = 0
- <6>[11037.086514] c0 [SSP]: send_instruction - Inst = 0xa2, Sensor Type = 0x0, data = 3
- <6>[11037.086878] c0 backlight panel: auto_brightness_store - 3, 0
- <6>[11037.111420] c0 lcd panel: brightness=212, bl=27, candela=210
- <4>[11037.121940] c3 Mali: = regulator_set_voltage: 975000, 975000
- <4>[11037.122223] c0 !@ElectronBeam entry
- <7>[11037.122552] c0 max77686: id=29, org=1c, val=1e
- <7>[11037.124114] c0 max77686_get_voltage: id=29, val=1e
- <4>[11037.124458] c0 Mali: Mali frequency 266
- <7>[11037.250035] c0 s5p-ohci s5p-ohci: auto-stop root hub
- <6>[11037.350472] c0 ssp_sensorhub_write: -78, 7, 0, 0
- <6>[11037.352800] c0 [SSP]: send_instruction - Inst = 0xb2, Sensor Type = 0x7, data = 0
- <6>[11037.403381] c0 lcd panel: brightness=0, bl=0, candela=20
- <4>[11037.404468] c1 !@[s] blankAllDisplays() : blankAllDisplaysFromPowerManage
- <6>[11037.404890] c0 lcd panel: ea8061_check_fb, fb0
- <6>[11037.404917] c0 s3cfb s3cfb.0: change blank mode=4, fb0, win2
- <6>[11037.404952] c0 lcd panel: ea8061_check_fb, fb0
- <4>[11037.405278] c1 !@[s] autosuspend_earlysuspend_enable : 7
- <4>[11037.405305] c1
- <6>[11037.405334] c1 request_suspend_state: sleep (0->3) at 11037405326306 (2014-12-01 14:24:24.809127682 UTC)
- <6>[11037.405410] c1 [SSP]: ssp_early_suspend
- <6>[11037.405448] c1 ssp_sensorhub_report_notice: sleep
- <6>[11037.405793] c1 [SSP]: ssp_send_status_cmd - MSG2SSP_AP_STATUS_CMD(0xd2)
- <7>[11037.405838] c1 [TouchKey] sec_touchkey_early_suspend
- <7>[11037.406467] c1 max77686_reg_disable: id=4, pattern=c0
- <7>[11037.407506] c1 epen:wacom_power_off
- <4>[11037.407887] c3 !@[s] wait_for_fb_sleep : 7 (1, 0) -
- <4>[11037.407912] c3
- <4>[11037.408018] c3 !@[s] wait_for_fb_wake : 7 (0, 0) +
- <4>[11037.408042] c3
- <5>[11037.408086] c1 melfas-ts 3-0048: mms_ts_suspend: users=1
- <7>[11037.408118] c1 melfas-ts 3-0048: [TSP] release_all_fingers
- <6>[11037.408171] c1 [TSP] dvfs_lock free.
- <6>[11037.408191] c1
- <7>[11037.408209] c1 [TSP] melfas_power off
- <6>[11037.408363] c1 [TSP] DVFS Off!!@[s] autosuspend_earlysuspend_enable done : 7
- <4>[11037.408426] c1
- <7>[11037.408827] c1 max77686_reg_disable: id=23, pattern=c0
- <7>[11037.410430] c1 max77686_reg_disable: id=22, pattern=c0
- <6>[11037.416110] c3 [SSP]: show_sensors_enable - cur_enable = 0
- <6>[11037.416162] c3 [SSP]: set_sensors_enable - new_enable = 64, old_enable = 0
- <6>[11037.416311] c3 [SSP]: change_sensor_delay - add 64, New = 200000000ns
- <6>[11037.417904] c0 [SSP]: send_instruction - Inst = 0xa1, Sensor Type = 0x6, data = 3
- <6>[11037.430664] c3 ssp_sensorhub_write: -76, 13, -46, 0
- <6>[11037.431242] c0 [SSP]: send_instruction - Inst = 0xb4, Sensor Type = 0xd, data = 210
- <6>[11037.436276] c0 ssp_sensorhub_write: -63, 14, 14, 24, 24
- <6>[11037.436904] c0 [SSP]: send_instruction - Inst = 0xc1, Sensor Type = 0xe, data = 14
- <4>[11037.465062] c1 s3cfb_extdsp_early_suspend is called
- <6>[11037.465093] c1 sii9234_early_suspend()
- <6>[11037.465118] c1 s3cfb s3cfb.0: +s3cfb_early_suspend
- <6>[11037.465145] c1 lcd panel: +ea8061_early_suspend
- <6>[11037.465181] c1 lcd panel: ea8061_power_off
- <6>[11037.602539] c0 [SSP]: MSG From MCU - ARC 1
- <6>[11037.602559] c0 SMR 7 1
- <6>[11037.603050] c0 [SSP]: show_sensors_enable - cur_enable = 64
- <6>[11037.603106] c0 [SSP]: set_sensors_enable - new_enable = 0, old_enable = 64
- <6>[11037.603139] c0 [SSP]: ssp_remove_sensor - remove sensor = 64, current state = 0
- <6>[11037.605125] c1 [SSP]: send_instruction - Inst = 0xa2, Sensor Type = 0x6, data = 3
- <7>[11037.605489] c1 led_lowpower mode set to 0
- <7>[11037.611150] c1 led pattern : 5 is activated
- <4>[11037.620362] c0 Mali: Mali frequency 160
- <4>[11037.620387] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11037.620992] c0 max77686: id=29, org=1e, val=1c
- <7>[11037.622552] c0 max77686_get_voltage: id=29, val=1c
- <6>[11037.765048] c1 lcd panel: -ea8061_early_suspend
- <6>[11037.781307] c1 s5p-dsim s5p-dsim.0: +s5p_dsim_early_suspend
- <6>[11037.781335] c1 lcd_power_on: enable=0
- <7>[11037.781939] c1 max77686_reg_disable: id=24, pattern=c0
- <7>[11037.783522] c1 max77686_reg_disable: id=12, pattern=c0
- <6>[11037.784541] c1 s5p_dsim_mipi_power_control: enable=0
- <6>[11037.785716] c1 s5p-dsim s5p-dsim.0: -s5p_dsim_early_suspend
- <6>[11037.785742] c1 s3cfb s3cfb.0: disable power domain
- <6>[11037.785772] c1 s3cfb s3cfb.0: -s3cfb_early_suspend
- <6>[11037.785810] c1 sync_system +
- <3>[11037.785827] c0 CPU_DOWN 1
- <6>[11037.785887] c1 active wake lock sync_system
- <6>[11037.785910] c1 active wake lock mdm_boot
- <6>[11037.785931] c1 active wake lock ssr(external_modem)
- <6>[11037.785958] c1 active wake lock ril-fd
- <6>[11037.785980] c1 active wake lock PowerManagerService.WakeLocks
- <6>[11037.786010] c1 active wake lock usb device wake lock
- <6>[11037.786034] c1 active wake lock usb cb wake lock
- <5>[11037.788283] c0 CPU1: shutdown
- <3>[11037.789021] c0 CPU_DOWN 3
- <5>[11037.789440] c0 CPU3: shutdown
- <6>[11037.904579] c0 sync_system -
- <4>[11037.990230] c0 !@notifyKey(172), action=0
- <4>[11037.990293] c0 !@interceptKeyBeforeQueueing(172), action=0
- <7>[11037.991749] c0 max77686: id=27, org=32, val=39
- <3>[11037.993175] c0 CPU_UP 3
- <4>[11037.993349] c0 !@handleInterceptActions(172), action=0
- <4>[11037.993466] c0 !@[ps] Screen__On : wakeUpFromNative: (uid: 1000 pid: 2460)
- <6>[11037.998108] c0 [SSP]: show_sensors_enable - cur_enable = 0
- <6>[11037.998158] c0 [SSP]: set_sensors_enable - new_enable = 64, old_enable = 0
- <6>[11037.998340] c0 [SSP]: change_sensor_delay - add 64, New = 200000000ns
- <3>[11037.998500] c0 [TouchKey] touchkey is not enabled. 239
- <6>[11037.998999] c0 ssp_sensorhub_write: -79, 7, 0, 0
- <6>[11037.999848] c0 [SSP]: send_instruction - Inst = 0xa1, Sensor Type = 0x6, data = 3
- <6>[11038.000424] c0 [SSP]: show_sensors_enable - cur_enable = 64
- <6>[11038.000471] c0 [SSP]: set_sensors_enable - new_enable = 65, old_enable = 64
- <6>[11038.000638] c0 [SSP]: change_sensor_delay - add 1, New = 200000000ns
- <6>[11038.002443] c0 [SSP]: send_instruction - Inst = 0xb1, Sensor Type = 0x7, data = 0
- <6>[11038.003260] c0 [SSP]: send_instruction - Inst = 0xa1, Sensor Type = 0x0, data = 3
- <6>[11038.003539] c0 backlight panel: auto_brightness_store - 0, 3
- <4>[11038.005455] c3 CPU3: Booted secondary processor
- <6>[11038.005507] c3 notifier_call_chain : NOTIFY BAD tick_notify
- <4>[11038.006022] c0 !@[s] autosuspend_earlysuspend_disable : 8
- <4>[11038.006047] c0
- <6>[11038.006073] c0 request_suspend_state: wakeup (3->0) at 11038006066973 (2014-12-01 14:24:25.409868766 UTC)
- <6>[11038.006140] c0 s3cfb s3cfb.0: +s3cfb_late_resume
- <6>[11038.006518] c0 s5p-dsim s5p-dsim.0: +s5p_dsim_late_resume
- <6>[11038.006543] c0 s5p_dsim_mipi_power_control: enable=1
- <6>[11038.010031] c3 Switched to NOHz mode on CPU #3
- <6>[11038.016610] c0 lcd_power_on: enable=1
- <7>[11038.017210] c0 max77686_reg_enable: id=12, pattern=c0
- <7>[11038.018770] c0 max77686_reg_enable: id=24, pattern=c0
- <4>[11038.093716] c3 !@ElectronBeam exit
- <7>[11038.093858] c0 led_lowpower mode set to 1
- <6>[11038.095148] c0 ssp_sensorhub_write: -76, 13, -47, 0
- <6>[11038.095719] c0 [SSP]: send_instruction - Inst = 0xb4, Sensor Type = 0xd, data = 209
- <7>[11038.097793] c3 led pattern : 0 is activated
- <6>[11038.116268] c0 s5p-dsim s5p-dsim.0: -s5p_dsim_late_resume
- <6>[11038.116376] c0 s3cfb s3cfb.0: fimd sclk rate 67692307, clkdiv 0xffffcc
- <6>[11038.116411] c0 s3cfb s3cfb.0: parent clock: 67692307, vclk: 67426000, vclk div: 1
- <6>[11038.116457] c0 lcd panel: +ea8061_late_resume
- <6>[11038.116480] c0 lcd panel: ea8061_power_on
- <3>[11038.116536] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.116568] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.116603] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.116640] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.116679] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.116714] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.116751] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.116782] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.116824] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.116861] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.116893] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.116925] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.116962] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.116995] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.117026] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.117062] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.117096] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.117127] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.117163] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <3>[11038.117198] c0 s5p-dsim s5p-dsim.0: s5p_dsim_wr_data fifo empty is founded
- <4>[11038.160179] c0 !@notifyKey(172), action=1
- <4>[11038.160234] c0 !@interceptKeyBeforeQueueing(172), action=1
- <4>[11038.160536] c3 !@handleInterceptActions(172), action=1
- <6>[11038.187143] c0 [SSP]: MSG From MCU - ARO 0
- <6>[11038.187163] c0 SMA 7 0
- <6>[11038.270999] c0 lcd panel: brightness=188, bl=24, candela=188
- <6>[11038.271034] c0 lcd panel: -ea8061_late_resume
- <6>[11038.271059] c0 s3cfb s3cfb.0: -s3cfb_late_resume
- <6>[11038.271083] c0 mdnie mdnie: +mdnie_late_resume
- <6>[11038.271109] c0 mdnie mdnie: auto_ui
- <6>[11038.271125] c0 mdnie mdnie: -mdnie_late_resume
- <6>[11038.271148] c0 sii9234_late_resume()
- <5>[11038.271171] c0 melfas-ts 3-0048: mms_ts_resume: users=1
- <7>[11038.271202] c0 [TSP] melfas_power on
- <7>[11038.271796] c0 max77686_reg_enable: id=23, pattern=c0
- <7>[11038.273363] c0 max77686_reg_enable: id=22, pattern=c0
- <4>[11038.395108] c0 !@[s] wait_for_fb_wake : 8 (1, 0) -
- <4>[11038.395134] c0
- <4>[11038.395219] c0 !@[s] wait_for_fb_sleep : 8 (0, 0) +
- <4>[11038.395239] c0
- <4>[11038.395276] c0 !@[s] autosuspend_earlysuspend_disable done : 8
- <4>[11038.395301] c0
- <4>[11038.395422] c0 !@[s] unblankAllDisplays() : unblankAllDisplaysFromPowerManager
- <6>[11038.395728] c3 lcd panel: ea8061_check_fb, fb0
- <6>[11038.395752] c3 s3cfb s3cfb.0: change blank mode=0, fb0, win2
- <6>[11038.395781] c3 lcd panel: ea8061_check_fb, fb0
- <6>[11038.395912] c3 [HPD_IF] s5p_hpd_ioctl: HPD status is unplugged
- <4>[11038.415048] c0 Mali: = regulator_set_voltage: 975000, 975000
- <7>[11038.415660] c0 max77686: id=29, org=1c, val=1e
- <7>[11038.417219] c0 max77686_get_voltage: id=29, val=1e
- <4>[11038.417558] c0 Mali: Mali frequency 266
- <7>[11038.500047] c0 epen:wacom_power_on
- <7>[11038.500070] c0 [TouchKey] sec_touchkey_late_resume
- <7>[11038.500683] c0 max77686_reg_enable: id=4, pattern=c0
- <6>[11038.501688] c0 s5p_gpioint_set_type irq:395 is at GPJ0(3)
- <4>[11038.515083] c3 Mali: = regulator_set_voltage: 1025000, 1025000
- <7>[11038.515778] c3 max77686: id=29, org=1e, val=22
- <7>[11038.517396] c3 max77686_get_voltage: id=29, val=22
- <4>[11038.517800] c3 Mali: Mali frequency 350
- <7>[11038.555986] c0 [TouchKey] data[0]=8 data[1]=11 data[2]=8 data[3]=0
- <4>[11038.615045] c0 Mali: = regulator_set_voltage: 1087500, 1087500
- <7>[11038.615656] c0 max77686: id=29, org=22, val=27
- <7>[11038.617216] c0 max77686_get_voltage: id=29, val=27
- <4>[11038.617557] c0 Mali: Mali frequency 440
- <7>[11038.661124] c0 [Touchkey] autocal Enabled
- <7>[11038.661529] c0 [Touchkey] LED returned on
- <6>[11038.661573] c0 [SSP]: ssp_late_resume
- <6>[11038.661631] c0 ssp_sensorhub_report_notice: wake up
- <6>[11038.667063] c0 [SSP]: ssp_send_status_cmd - MSG2SSP_AP_STATUS_CMD(0xd1)
- <7>[11038.680082] c3 epen:pdct 1(0)
- <7>[11038.680099] c0 epen:wacom_i2c_resume_work
- <6>[11038.726782] c0 ssp_sensorhub_list: 1, 1, 7, -1
- <6>[11038.726878] c3 ssp_sensorhub_read: 1, 1, 7, -1
- <7>[11039.000263] c0 hub 1-0:1.0: hub_suspend
- <7>[11039.000307] c0 usb usb1: bus auto-suspend
- <7>[11039.000339] c0 s5p-ohci s5p-ohci: suspend root hub
- <7>[11039.000823] c0 max77686: id=27, org=39, val=32
- <6>[11039.206803] c0 ssp_sensorhub_list: 1, 1, 7, 0
- <6>[11039.206899] c3 ssp_sensorhub_read: 1, 1, 7, 0Mali: Mali frequency 350
- <4>[11039.215478] c3 Mali: = regulator_set_voltage: 1025000, 1025000
- <7>[11039.216112] c0 max77686: id=29, org=27, val=22
- <7>[11039.217776] c0 max77686_get_voltage: id=29, val=22
- <4>[11039.315074] c0 Mali: = regulator_set_voltage: 1087500, 1087500
- <7>[11039.315729] c0 max77686: id=29, org=22, val=27
- <7>[11039.317329] c0 max77686_get_voltage: id=29, val=27
- <4>[11039.317680] c0 Mali: Mali frequency 440
- <6>[11039.324550] c0 ssp_sensorhub_list: 1, 1, 7, -1
- <6>[11039.324634] c3 ssp_sensorhub_read: 1, 1, 7, -1
- <6>[11039.747327] c0 ssp_sensorhub_list: 1, 1, 7, 0
- <6>[11039.747439] c3 ssp_sensorhub_read: 1, 1, 7, 0Mali: Mali frequency 350
- <4>[11039.815459] c0 Mali: = regulator_set_voltage: 1025000, 1025000
- <7>[11039.816100] c0 max77686: id=29, org=27, val=22
- <7>[11039.817726] c0 max77686_get_voltage: id=29, val=22
- <7>[11040.305710] c0 max77686: id=27, org=32, val=39
- <7>[11040.505701] c0 max77686: id=27, org=39, val=32
- <6>[11040.528550] c0 ssp_sensorhub_list: 1, 1, 7, -1
- <6>[11040.528641] c3 ssp_sensorhub_read: 1, 1, 7, -1
- <6>[11041.441477] c0 mdm_modem_ioctl: Powering on mdm
- <6>[11041.441502] c0 request_boot_lock_set
- <3>[11041.441526] c0 mdm_do_soft_power_on: soft resetting mdm modem
- <6>[11041.441552] c0 mdm_peripheral_disconnect
- <6>[11041.441639] c0 s5p-ohci s5p-ohci: remove, state 4
- <7>[11041.441673] c0 s5p-ohci s5p-ohci: roothub graceful disconnect
- <6>[11041.441713] c0 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xac/0x160
- <6>[11041.441749] c0 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11041.441778] c0 usb usb1: unregistering device
- <7>[11041.441799] c0 usb usb1: unregistering interface 1-0:1.0
- <7>[11041.442180] c0 usb usb1: usb_disable_device nuking all URBs
- <7>[11041.461378] c0 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11041.461406] c0 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11041.461439] c0 s5p-ohci s5p-ohci: control 0x4c3 RWE HCFS=suspend CBSR=3
- <7>[11041.461469] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11041.461496] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11041.461523] c0 s5p-ohci s5p-ohci: intrenable 0x0000005a RHSC UE RD WDH
- <7>[11041.461555] c0 s5p-ohci s5p-ohci: hcca frame #03fc
- <7>[11041.461580] c0 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11041.461611] c0 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11041.461642] c0 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11041.461670] c0 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11041.461700] c0 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11041.461731] c0 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <6>[11041.461808] c0 s5p-ohci s5p-ohci: USB bus 1 deregistered
- <6>[11041.490348] c3 s5p-ohci s5p-ohci: still being used(18)
- <6>[11041.525043] c3 mdm_peripheral_connect
- <6>[11041.525501] c3 set hsic lpa phy init
- <6>[11041.525524] c3 s5p-ehci s5p-ehci: usb phy usage(18)
- <3>[11041.525546] c3 s5p-ehci s5p-ehci: Already power on PHY
- <7>[11041.525571] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11041.525611] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <7>[11041.525641] c3 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000
- <7>[11041.525671] c3 s5p-ehci s5p-ehci: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
- <7>[11041.525709] c3 s5p-ehci s5p-ehci: reset hcc_params 2a016 thresh 1 uframes 256/512/1024 park LPM
- <6>[11041.525747] c3 s5p-ehci s5p-ehci: S5P EHCI Host Controller
- <7>[11041.525830] c3 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11041.525896] c3 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11041.525937] c3 drivers/usb/core/inode.c: creating file '001'
- <6>[11041.526306] c3 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- <7>[11041.526408] c3 s5p-ehci s5p-ehci: park 0
- <7>[11041.526427] c3 s5p-ehci s5p-ehci: support lpm
- <6>[11041.526463] c3 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
- <7>[11041.526494] c3 s5p-ehci s5p-ehci: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
- <7>[11041.605640] c0 max77686: id=27, org=32, val=39
- <3>[11041.855209] c3 s5p-ehci s5p-ehci: startup error -110
- <6>[11041.855239] c3 s5p-ehci s5p-ehci: USB bus 1 deregistered
- <7>[11041.900667] c0 max77686: id=27, org=39, val=32
- <3>[11041.905476] c3 s5p-ehci s5p-ehci: Failed to add USB HCD
- <4>[11041.905519] c3 s5p-ehci: probe of s5p-ehci failed with error -110
- <6>[11041.905958] c3 s5p-ohci s5p-ohci: usb phy usage(22)
- <3>[11041.905983] c3 s5p-ohci s5p-ohci: Already power on PHY
- <7>[11041.906008] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11041.906048] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <6>[11041.906077] c3 s5p-ohci s5p-ohci: s5p OHCI
- <7>[11041.906148] c3 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11041.906198] c3 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11041.906237] c3 drivers/usb/core/inode.c: creating file '001'
- <6>[11041.906584] c3 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 1
- <7>[11041.906626] c3 s5p-ohci s5p-ohci: ohci_s5p_init, ohci:e78bd108
- <7>[11041.906702] c3 s5p-ohci s5p-ohci: created debug files
- <6>[11041.906739] c3 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
- <7>[11041.906765] c3 s5p-ohci s5p-ohci: ohci_s5p_start, ohci:e78bd108
- <7>[11041.964043] c3 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11041.964071] c3 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11041.964103] c3 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3
- <7>[11041.964134] c3 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11041.964162] c3 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11041.964189] c3 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
- <7>[11041.964221] c3 s5p-ohci s5p-ohci: hcca frame #0005
- <7>[11041.964246] c3 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11041.964278] c3 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11041.964308] c3 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11041.964336] c3 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11041.964367] c3 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11041.964398] c3 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <7>[11041.964455] c3 usb usb1: default language 0x0409
- <7>[11041.964488] c3 usb usb1: udev 1, busnum 1, minor = 0
- <6>[11041.964512] c3 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- <6>[11041.964544] c3 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[11041.964576] c3 usb usb1: Product: s5p OHCI
- <6>[11041.964596] c3 usb usb1: Manufacturer: Linux 3.0.31-1665483 ohci_hcd
- <6>[11041.964624] c3 usb usb1: SerialNumber: s5p-ohci
- <6>[11041.964647] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11041.966018] c3 usb usb1: usb_probe_device
- <7>[11041.966043] c3 usb usb1: configuration #1 chosen from 1 choice
- <7>[11041.966091] c3 usb usb1: adding 1-0:1.0 (config #1, interface 0)
- <7>[11041.966433] c3 hub 1-0:1.0: usb_probe_interface
- <7>[11041.966458] c3 hub 1-0:1.0: usb_probe_interface - got id
- <6>[11041.966486] c3 hub 1-0:1.0: USB hub found
- <6>[11041.966519] c3 hub 1-0:1.0: 3 ports detected
- <7>[11041.966540] c3 hub 1-0:1.0: standalone hub
- <7>[11041.966561] c3 hub 1-0:1.0: no power switching (usb 1.0)
- <7>[11041.966588] c3 hub 1-0:1.0: global over-current protection
- <7>[11041.966613] c3 hub 1-0:1.0: power on to power good time: 4ms
- <7>[11041.966646] c3 hub 1-0:1.0: local power source is good
- <7>[11041.966670] c3 hub 1-0:1.0: no over-current condition exists
- <7>[11041.966698] c3 hub 1-0:1.0: trying to enable port power on non-switchable hub
- <7>[11041.967086] c3 drivers/usb/core/inode.c: creating file '001'
- <7>[11042.065063] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <5>[11042.507953] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11042.507989] c3 [TSP] DVFS On![8]Mali: Mali frequency 350
- <7>[11042.600676] c0 max77686: id=27, org=32, val=39Mali: Mali frequency 266
- <4>[11042.615503] c0 Mali: = regulator_set_voltage: 975000, 975000
- <7>[11042.616167] c0 max77686: id=29, org=22, val=1e
- <5>[11042.616276] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <7>[11042.617801] c0 max77686_get_voltage: id=29, val=1e
- <6>[11042.630343] c0 ssp_sensorhub_list: 1, 1, 7, 0
- <6>[11042.630436] c3 ssp_sensorhub_read: 1, 1, 7, 0
- <7>[11042.700695] c0 max77686: id=27, org=39, val=32
- <6>[11042.715058] c3 [TSP] DVFS Off!
- <6>[11042.807917] c0 ssp_sensorhub_list: 1, 1, 7, -1
- <6>[11042.807999] c3 ssp_sensorhub_read: 1, 1, 7, -1
- <7>[11043.000039] c3 s5p-ohci s5p-ohci: auto-stop root hub
- <4>[11043.115361] c0 Mali: Mali frequency 160
- <4>[11043.115385] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11043.115994] c0 max77686: id=29, org=1e, val=1c
- <7>[11043.117567] c0 max77686_get_voltage: id=29, val=1c
- <5>[11043.214166] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11043.214203] c3 [TSP] DVFS On![8]
- <6>[11043.410042] c3 [TSP] change_dvfs_lockMali: = regulator_set_voltage: 975000, 975000
- <7>[11043.415651] c0 max77686: id=29, org=1c, val=1e
- <7>[11043.417257] c0 max77686_get_voltage: id=29, val=1e
- <4>[11043.417609] c0 Mali: Mali frequency 266
- <5>[11043.487794] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11043.531224] c0 ssp_sensorhub_list: 1, 1, 7, 0
- <6>[11043.531306] c3 ssp_sensorhub_read: 1, 1, 7, 0
- <6>[11043.585046] c3 [TSP] DVFS Off!Mali: Mali frequency 160
- <4>[11043.915385] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11043.915996] c0 max77686: id=29, org=1e, val=1c
- <7>[11043.917558] c0 max77686_get_voltage: id=29, val=1c
- <5>[11043.955037] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11043.955078] c3 [TSP] DVFS On![8]
- <5>[11043.989765] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <7>[11044.050699] c0 max77686: id=27, org=32, val=39
- <7>[11044.065060] c3 hub 1-0:1.0: hub_suspend
- <7>[11044.065093] c3 usb usb1: bus auto-suspend
- <7>[11044.065116] c3 s5p-ohci s5p-ohci: suspend root hub
- <6>[11044.085068] c3 [TSP] DVFS Off!
- <7>[11044.200723] c0 max77686: id=27, org=39, val=32Mali: = regulator_set_voltage: 975000, 975000
- <7>[11044.215657] c0 max77686: id=29, org=1c, val=1e
- <7>[11044.217220] c0 max77686_get_voltage: id=29, val=1e
- <4>[11044.217566] c0 Mali: Mali frequency 266
- <5>[11044.349513] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11044.349561] c3 [TSP] DVFS On![8]
- <5>[11044.408454] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11044.505054] c3 [TSP] DVFS Off!
- <6>[11044.970054] c0 ssp_sensorhub_list: 1, 1, 7, -1
- <6>[11044.970135] c3 ssp_sensorhub_read: 1, 1, 7, -1
- <5>[11045.163119] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11045.163158] c3 [TSP] DVFS On![8]
- <5>[11045.209960] c3 melfas-ts 3-0048: R(M)(60) [ 0]Mali: Mali frequency 160
- <4>[11045.290403] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11045.291016] c0 max77686: id=29, org=1e, val=1c
- <7>[11045.292608] c0 max77686_get_voltage: id=29, val=1c
- <7>[11045.300662] c0 max77686: id=27, org=32, val=39
- <6>[11045.305045] c3 [TSP] DVFS Off!
- <7>[11045.400714] c0 max77686: id=27, org=39, val=32
- <5>[11045.772455] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11045.772496] c3 [TSP] DVFS On![8]
- <7>[11045.850770] c0 max77686: id=27, org=32, val=39
- <5>[11045.879558] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <7>[11045.950749] c0 max77686: id=27, org=39, val=32
- <6>[11045.975049] c3 [TSP] DVFS Off!Mali: = regulator_set_voltage: 975000, 975000
- <7>[11046.100654] c0 max77686: id=29, org=1c, val=1e
- <7>[11046.102222] c0 max77686_get_voltage: id=29, val=1e
- <4>[11046.102574] c0 Mali: Mali frequency 266
- <5>[11046.418723] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11046.418761] c3 [TSP] DVFS On![8]
- <5>[11046.591588] c3 melfas-ts 3-0048: R(M)(60) [ 0]Mali: Mali frequency 160
- <4>[11046.600385] c3 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11046.600990] c0 max77686: id=29, org=1e, val=1c
- <7>[11046.602552] c0 max77686_get_voltage: id=29, val=1c
- <6>[11046.690049] c3 [TSP] DVFS Off!Mali: = regulator_set_voltage: 975000, 975000
- <7>[11046.700650] c0 max77686: id=29, org=1c, val=1e
- <7>[11046.702213] c0 max77686_get_voltage: id=29, val=1e
- <4>[11046.702560] c0 Mali: Mali frequency 266
- <6>[11047.017412] c0 ssp_sensorhub_list: 1, 1, 7, 0
- <6>[11047.017545] c3 ssp_sensorhub_read: 1, 1, 7, 0
- <5>[11047.094593] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11047.094632] c3 [TSP] DVFS On![8]
- <6>[11047.171336] c3 mdm_modem_ioctl: Powering on mdm
- <6>[11047.171361] c3 request_boot_lock_set
- <3>[11047.171383] c3 mdm_do_soft_power_on: soft resetting mdm modem
- <6>[11047.171409] c3 mdm_peripheral_disconnect
- <6>[11047.171497] c3 s5p-ohci s5p-ohci: remove, state 4
- <7>[11047.171532] c3 s5p-ohci s5p-ohci: roothub graceful disconnect
- <6>[11047.171572] c3 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xac/0x160
- <6>[11047.171607] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11047.171636] c3 usb usb1: unregistering device
- <7>[11047.171658] c3 usb usb1: unregistering interface 1-0:1.0
- <7>[11047.172032] c3 usb usb1: usb_disable_device nuking all URBs
- <7>[11047.186272] c3 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11047.186303] c3 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11047.186339] c3 s5p-ohci s5p-ohci: control 0x4c3 RWE HCFS=suspend CBSR=3
- <7>[11047.186372] c3 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11047.186399] c3 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11047.186426] c3 s5p-ohci s5p-ohci: intrenable 0x0000005a RHSC UE RD WDH
- <7>[11047.186460] c3 s5p-ohci s5p-ohci: hcca frame #0411
- <7>[11047.186486] c3 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11047.186517] c3 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11047.186547] c3 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11047.186576] c3 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11047.186607] c3 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11047.186637] c3 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <6>[11047.186715] c3 s5p-ohci s5p-ohci: USB bus 1 deregistered
- <6>[11047.205665] c3 s5p-ohci s5p-ohci: still being used(18)
- <4>[11047.220402] c3 Mali: Mali frequency 160
- <4>[11047.220427] c3 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11047.221033] c0 max77686: id=29, org=1e, val=1c
- <7>[11047.222593] c0 max77686_get_voltage: id=29, val=1c
- <6>[11047.240041] c3 mdm_peripheral_connect
- <6>[11047.240504] c3 set hsic lpa phy init
- <6>[11047.240556] c3 s5p-ehci s5p-ehci: usb phy usage(18)
- <3>[11047.240580] c3 s5p-ehci s5p-ehci: Already power on PHY
- <7>[11047.240606] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11047.240646] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <7>[11047.240677] c3 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000
- <7>[11047.240708] c3 s5p-ehci s5p-ehci: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
- <7>[11047.240747] c3 s5p-ehci s5p-ehci: reset hcc_params 2a016 thresh 1 uframes 256/512/1024 park LPM
- <6>[11047.240805] c3 s5p-ehci s5p-ehci: S5P EHCI Host Controller
- <7>[11047.240892] c3 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11047.240962] c3 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11047.241003] c3 drivers/usb/core/inode.c: creating file '001'
- <6>[11047.241497] c3 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- <7>[11047.241616] c3 s5p-ehci s5p-ehci: park 0
- <7>[11047.241657] c3 s5p-ehci s5p-ehci: support lpm
- <6>[11047.241698] c3 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
- <7>[11047.241733] c3 s5p-ehci s5p-ehci: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
- <6>[11047.290052] c3 [TSP] change_dvfs_lock
- <7>[11047.300635] c0 max77686: id=27, org=32, val=39
- <5>[11047.349497] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11047.445028] c3 [TSP] DVFS Off!
- <5>[11047.552955] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11047.552991] c3 [TSP] DVFS On![8]
- <3>[11047.572045] c3 s5p-ehci s5p-ehci: startup error -110
- <6>[11047.572079] c3 s5p-ehci s5p-ehci: USB bus 1 deregistered
- <5>[11047.588162] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <3>[11047.595394] c3 s5p-ehci s5p-ehci: Failed to add USB HCD
- <4>[11047.595439] c3 s5p-ehci: probe of s5p-ehci failed with error -110
- <6>[11047.595839] c3 s5p-ohci s5p-ohci: usb phy usage(22)
- <3>[11047.595863] c3 s5p-ohci s5p-ohci: Already power on PHY
- <7>[11047.595887] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11047.595926] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <6>[11047.595954] c3 s5p-ohci s5p-ohci: s5p OHCI
- <7>[11047.596022] c3 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11047.596068] c3 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11047.596104] c3 drivers/usb/core/inode.c: creating file '001'
- <6>[11047.596427] c3 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 1
- <7>[11047.596468] c3 s5p-ohci s5p-ohci: ohci_s5p_init, ohci:e78bd108
- <7>[11047.596541] c3 s5p-ohci s5p-ohci: created debug files
- <6>[11047.596578] c3 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
- <7>[11047.596604] c3 s5p-ohci s5p-ohci: ohci_s5p_start, ohci:e78bd108
- <7>[11047.600705] c0 max77686: id=27, org=39, val=35
- <7>[11047.654086] c3 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11047.654120] c3 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11047.654157] c3 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3
- <7>[11047.654191] c3 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11047.654221] c3 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11047.654250] c3 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
- <7>[11047.654287] c3 s5p-ohci s5p-ohci: hcca frame #0005
- <7>[11047.654315] c3 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11047.654351] c3 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11047.654386] c3 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11047.654418] c3 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11047.654453] c3 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11047.654486] c3 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <7>[11047.654552] c3 usb usb1: default language 0x0409
- <7>[11047.654588] c3 usb usb1: udev 1, busnum 1, minor = 0
- <6>[11047.654615] c3 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- <6>[11047.654651] c3 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[11047.654690] c3 usb usb1: Product: s5p OHCI
- <6>[11047.654713] c3 usb usb1: Manufacturer: Linux 3.0.31-1665483 ohci_hcd
- <6>[11047.654744] c3 usb usb1: SerialNumber: s5p-ohci
- <6>[11047.654769] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11047.657613] c3 usb usb1: usb_probe_device
- <7>[11047.657644] c3 usb usb1: configuration #1 chosen from 1 choice
- <7>[11047.657704] c3 usb usb1: adding 1-0:1.0 (config #1, interface 0)
- <7>[11047.659543] c3 hub 1-0:1.0: usb_probe_interface
- <7>[11047.659582] c3 hub 1-0:1.0: usb_probe_interface - got id
- <6>[11047.659616] c3 hub 1-0:1.0: USB hub found
- <6>[11047.659656] c3 hub 1-0:1.0: 3 ports detected
- <7>[11047.659682] c3 hub 1-0:1.0: standalone hub
- <7>[11047.659704] c3 hub 1-0:1.0: no power switching (usb 1.0)
- <7>[11047.659728] c3 hub 1-0:1.0: global over-current protection
- <7>[11047.659755] c3 hub 1-0:1.0: power on to power good time: 4ms
- <7>[11047.659788] c3 hub 1-0:1.0: local power source is good
- <7>[11047.659814] c3 hub 1-0:1.0: no over-current condition exists
- <7>[11047.659842] c3 hub 1-0:1.0: trying to enable port power on non-switchable hub
- <7>[11047.662133] c3 drivers/usb/core/inode.c: creating file '001'
- <6>[11047.685049] c3 [TSP] DVFS Off!
- <7>[11047.700686] c0 max77686: id=27, org=35, val=32
- <7>[11047.755066] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <5>[11048.270968] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11048.271005] c3 [TSP] DVFS On![8]
- <5>[11048.341602] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11048.440048] c3 [TSP] DVFS Off!Mali: = regulator_set_voltage: 975000, 975000
- <7>[11048.545657] c0 max77686: id=29, org=1c, val=1e
- <7>[11048.547219] c0 max77686_get_voltage: id=29, val=1e
- <4>[11048.547563] c0 Mali: Mali frequency 266
- <7>[11048.750046] c3 s5p-ohci s5p-ohci: auto-stop root hub
- <7>[11048.850686] c0 max77686: id=27, org=32, val=39
- <6>[11048.873856] c0 ssp_sensorhub_list: 1, 1, 7, -1
- <6>[11048.873934] c3 ssp_sensorhub_read: 1, 1, 7, -1
- <7>[11048.900704] c0 max77686: id=27, org=39, val=32
- <6>[11049.040036] c0 [SSP]: debug_work_func(202) - Sensor state: 0xef, RC: 0, MS: 0
- <6>[11049.040070] c0 0 : -135, 578, 824 (200ms)
- <6>[11049.040090] c0 6 : 114, 140, 63, 101 (200ms)
- <5>[11049.047822] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11049.047861] c3 [TSP] DVFS On![8]
- <5>[11049.071181] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11049.170044] c3 [TSP] DVFS Off!
- <6>[11049.236564] c0 ssp_sensorhub_list: 1, 1, 7, 0
- <6>[11049.236646] c3 ssp_sensorhub_read: 1, 1, 7, 0Mali: Mali frequency 160
- <4>[11049.245395] c3 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11049.246004] c0 max77686: id=29, org=1e, val=1c
- <7>[11049.247575] c0 max77686_get_voltage: id=29, val=1c
- <5>[11049.334943] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11049.334981] c3 [TSP] DVFS On![8]
- <6>[11049.357126] c0 ssp_sensorhub_list: 1, 1, 7, -1
- <6>[11049.357200] c3 ssp_sensorhub_read: 1, 1, 7, -1
- <5>[11049.370789] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <7>[11049.450718] c0 max77686: id=27, org=32, val=39
- <6>[11049.470060] c3 [TSP] DVFS Off!
- <7>[11049.500705] c0 max77686: id=27, org=39, val=32
- <5>[11049.885079] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11049.885117] c3 [TSP] DVFS On![8]
- <7>[11049.960069] c3 hub 1-0:1.0: hub_suspend
- <7>[11049.960110] c3 usb usb1: bus auto-suspend
- <7>[11049.960137] c3 s5p-ohci s5p-ohci: suspend root hub
- <5>[11049.992300] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11050.090075] c3 [TSP] DVFS Off!Mali: = regulator_set_voltage: 975000, 975000
- <7>[11050.160680] c0 max77686: id=29, org=1c, val=1e
- <7>[11050.162265] c0 max77686_get_voltage: id=29, val=1e
- <4>[11050.162611] c0 Mali: Mali frequency 266
- <5>[11050.495586] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11050.495628] c3 [TSP] DVFS On![8]Mali: Mali frequency 160
- <4>[11050.660430] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11050.661050] c0 max77686: id=29, org=1e, val=1c
- <7>[11050.662657] c0 max77686_get_voltage: id=29, val=1c
- <5>[11050.692374] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11050.790057] c3 [TSP] DVFS Off!
- <6>[11050.801138] c0 ssp_sensorhub_list: 1, 1, 7, 0
- <6>[11050.801223] c3 ssp_sensorhub_read: 1, 1, 7, 0
- <5>[11050.991755] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11050.991795] c3 [TSP] DVFS On![8]Mali: = regulator_set_voltage: 975000, 975000
- <7>[11051.160674] c0 max77686: id=29, org=1c, val=1e
- <7>[11051.162261] c3 max77686_get_voltage: id=29, val=1e
- <4>[11051.162692] c3 Mali: Mali frequency 266
- <6>[11051.190072] c3 [TSP] change_dvfs_lock
- <5>[11051.249588] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11051.345043] c3 [TSP] DVFS Off!
- <5>[11051.513711] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11051.513749] c3 [TSP] DVFS On![8]
- <5>[11051.584525] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11051.680039] c3 [TSP] DVFS Off!Mali: Mali frequency 160
- <4>[11051.685374] c3 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11051.685981] c0 max77686: id=29, org=1e, val=1c
- <7>[11051.687541] c0 max77686_get_voltage: id=29, val=1c
- <6>[11052.866361] c3 mdm_modem_ioctl: Powering on mdm
- <6>[11052.866386] c3 request_boot_lock_set
- <3>[11052.866409] c3 mdm_do_soft_power_on: soft resetting mdm modem
- <6>[11052.866434] c3 mdm_peripheral_disconnect
- <6>[11052.866521] c3 s5p-ohci s5p-ohci: remove, state 4
- <7>[11052.866555] c3 s5p-ohci s5p-ohci: roothub graceful disconnect
- <6>[11052.866595] c3 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xac/0x160
- <6>[11052.866631] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11052.866659] c3 usb usb1: unregistering device
- <7>[11052.866681] c3 usb usb1: unregistering interface 1-0:1.0
- <7>[11052.867182] c3 usb usb1: usb_disable_device nuking all URBs
- <7>[11052.910620] c3 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11052.910652] c3 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11052.910688] c3 s5p-ohci s5p-ohci: control 0x4c3 RWE HCFS=suspend CBSR=3
- <7>[11052.910720] c3 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11052.910748] c3 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11052.910776] c3 s5p-ohci s5p-ohci: intrenable 0x0000005a RHSC UE RD WDH
- <7>[11052.910808] c3 s5p-ohci s5p-ohci: hcca frame #044d
- <7>[11052.910833] c3 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11052.910865] c3 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11052.910897] c3 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11052.910926] c3 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11052.910957] c3 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11052.910987] c3 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <6>[11052.911066] c3 s5p-ohci s5p-ohci: USB bus 1 deregistered
- <6>[11052.930334] c0 s5p-ohci s5p-ohci: still being used(18)
- <6>[11052.965086] c0 mdm_peripheral_connect
- <6>[11052.965496] c0 set hsic lpa phy init
- <6>[11052.965518] c0 s5p-ehci s5p-ehci: usb phy usage(18)
- <3>[11052.965542] c0 s5p-ehci s5p-ehci: Already power on PHY
- <7>[11052.965566] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11052.965606] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <7>[11052.965636] c0 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000
- <7>[11052.965665] c0 s5p-ehci s5p-ehci: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
- <7>[11052.965703] c0 s5p-ehci s5p-ehci: reset hcc_params 2a016 thresh 1 uframes 256/512/1024 park LPM
- <6>[11052.965742] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller
- <7>[11052.965821] c0 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11052.965885] c0 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11052.965926] c0 drivers/usb/core/inode.c: creating file '001'
- <6>[11052.966304] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- <7>[11052.966408] c0 s5p-ehci s5p-ehci: park 0
- <7>[11052.966428] c0 s5p-ehci s5p-ehci: support lpm
- <6>[11052.966462] c0 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
- <7>[11052.966493] c0 s5p-ehci s5p-ehci: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
- <7>[11053.000627] c0 max77686: id=27, org=32, val=39
- <6>[11053.017861] c0 ssp_sensorhub_list: 1, 1, 7, -1
- <6>[11053.017940] c3 ssp_sensorhub_read: 1, 1, 7, -1
- <6>[11053.260391] c0 ssp_sensorhub_list: 1, 1, 7, 0
- <6>[11053.260462] c3 ssp_sensorhub_read: 1, 1, 7, 0
- <3>[11053.296365] c0 s5p-ehci s5p-ehci: startup error -110
- <6>[11053.296398] c0 s5p-ehci s5p-ehci: USB bus 1 deregistered
- <3>[11053.345423] c3 s5p-ehci s5p-ehci: Failed to add USB HCD
- <4>[11053.345469] c3 s5p-ehci: probe of s5p-ehci failed with error -110
- <6>[11053.345886] c3 s5p-ohci s5p-ohci: usb phy usage(22)
- <3>[11053.345908] c3 s5p-ohci s5p-ohci: Already power on PHY
- <7>[11053.345931] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11053.345970] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <6>[11053.345998] c3 s5p-ohci s5p-ohci: s5p OHCI
- <7>[11053.346066] c3 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11053.346113] c3 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11053.346152] c3 drivers/usb/core/inode.c: creating file '001'
- <6>[11053.346482] c3 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 1
- <7>[11053.346522] c3 s5p-ohci s5p-ohci: ohci_s5p_init, ohci:e78be908
- <7>[11053.346593] c3 s5p-ohci s5p-ohci: created debug files
- <6>[11053.346628] c3 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
- <7>[11053.346653] c3 s5p-ohci s5p-ohci: ohci_s5p_start, ohci:e78be908
- <7>[11053.400678] c0 max77686: id=27, org=39, val=32
- <7>[11053.404193] c3 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11053.404220] c3 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11053.404251] c3 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3
- <7>[11053.404282] c3 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11053.404308] c3 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11053.404335] c3 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
- <7>[11053.404367] c3 s5p-ohci s5p-ohci: hcca frame #0005
- <7>[11053.404392] c3 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11053.404425] c3 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11053.404454] c3 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11053.404483] c3 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11053.404514] c3 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11053.404544] c3 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <7>[11053.404601] c3 usb usb1: default language 0x0409
- <7>[11053.404634] c3 usb usb1: udev 1, busnum 1, minor = 0
- <6>[11053.404658] c3 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- <6>[11053.404690] c3 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[11053.404723] c3 usb usb1: Product: s5p OHCI
- <6>[11053.404743] c3 usb usb1: Manufacturer: Linux 3.0.31-1665483 ohci_hcd
- <6>[11053.404771] c3 usb usb1: SerialNumber: s5p-ohci
- <6>[11053.404793] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11053.405300] c3 usb usb1: usb_probe_device
- <7>[11053.405325] c3 usb usb1: configuration #1 chosen from 1 choice
- <7>[11053.405370] c3 usb usb1: adding 1-0:1.0 (config #1, interface 0)
- <7>[11053.406168] c3 hub 1-0:1.0: usb_probe_interface
- <7>[11053.406192] c3 hub 1-0:1.0: usb_probe_interface - got id
- <6>[11053.406219] c3 hub 1-0:1.0: USB hub found
- <6>[11053.406250] c3 hub 1-0:1.0: 3 ports detected
- <7>[11053.406271] c3 hub 1-0:1.0: standalone hub
- <7>[11053.406290] c3 hub 1-0:1.0: no power switching (usb 1.0)
- <7>[11053.406314] c3 hub 1-0:1.0: global over-current protection
- <7>[11053.406340] c3 hub 1-0:1.0: power on to power good time: 4ms
- <7>[11053.406373] c3 hub 1-0:1.0: local power source is good
- <7>[11053.406396] c3 hub 1-0:1.0: no over-current condition exists
- <7>[11053.406422] c3 hub 1-0:1.0: trying to enable port power on non-switchable hub
- <7>[11053.406792] c3 drivers/usb/core/inode.c: creating file '001'
- <7>[11053.505078] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <5>[11053.714059] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11053.714096] c3 [TSP] DVFS On![8]Mali: = regulator_set_voltage: 975000, 975000
- <7>[11053.727060] c0 max77686: id=29, org=1c, val=1e
- <7>[11053.728625] c0 max77686_get_voltage: id=29, val=1e
- <4>[11053.728969] c0 Mali: Mali frequency 266
- <5>[11053.797088] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11053.895044] c3 [TSP] DVFS Off!
- <6>[11054.098954] c0 ssp_sensorhub_list: 1, 1, 7, -1
- <6>[11054.099038] c3 ssp_sensorhub_read: 1, 1, 7, -1Mali: Mali frequency 160
- <4>[11054.225420] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11054.226034] c0 max77686: id=29, org=1e, val=1c
- <7>[11054.227619] c0 max77686_get_voltage: id=29, val=1c
- <6>[11054.404369] c0 ssp_sensorhub_list: 1, 1, 7, 0
- <6>[11054.404445] c3 ssp_sensorhub_read: 1, 1, 7, 0
- <7>[11054.500032] c3 s5p-ohci s5p-ohci: auto-stop root hub
- <5>[11054.563196] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11054.563240] c3 [TSP] DVFS On![8]
- <6>[11054.574104] c0 audss_reg_restore: SRC[0x1], DIV[0xf13], GATE[0x42]
- <6>[11054.574147] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf13], GATE[0x1c7]
- <6>[11054.574258] c0 wm8994-codec wm8994-codec: t0_wm1811_aif1_hw_params ++
- <6>[11054.574297] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++
- <6>[11054.574330] c0 wm8994-codec wm8994-codec: t0_wm1811_aif1_hw_params --
- <6>[11054.574644] c0 I:P:DmaAddr=@2058000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xf2270000
- <6>[11054.582213] c0 ssp_sensorhub_list: 1, 1, 7, -1
- <6>[11054.582305] c3 ssp_sensorhub_read: 1, 1, 7, -1
- <7>[11054.647375] c0 i2s_txctrl:Turn on
- <4>[11054.725068] c0 Mali: = regulator_set_voltage: 975000, 975000
- <7>[11054.725685] c0 max77686: id=29, org=1c, val=1e
- <7>[11054.727251] c0 max77686_get_voltage: id=29, val=1e
- <4>[11054.727596] c0 Mali: Mali frequency 266
- <5>[11054.731306] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11054.764801] c0 ssp_sensorhub_list: 1, 1, 7, 0
- <6>[11054.764981] c3 ssp_sensorhub_read: 1, 1, 7, 0
- <7>[11054.800676] c0 max77686: id=27, org=32, val=39
- <6>[11054.830083] c3 [TSP] DVFS Off!
- <6>[11054.942590] c0 ssp_sensorhub_list: 1, 1, 7, -1
- <6>[11054.942690] c3 ssp_sensorhub_read: 1, 1, 7, -1Mali: = regulator_set_voltage: 1025000, 1025000
- <7>[11055.025710] c0 max77686: id=29, org=1e, val=22
- <7>[11055.027326] c0 max77686_get_voltage: id=29, val=22
- <4>[11055.027688] c0 Mali: Mali frequency 350
- <4>[11055.125066] c0 Mali: = regulator_set_voltage: 1087500, 1087500
- <7>[11055.125675] c0 max77686: id=29, org=22, val=27
- <7>[11055.127236] c0 max77686_get_voltage: id=29, val=27
- <4>[11055.127578] c0 Mali: Mali frequency 440
- <7>[11055.200802] c0 max77686: id=27, org=39, val=35
- <7>[11055.250721] c0 max77686: id=27, org=35, val=39Mali: Mali frequency 350
- <4>[11055.625400] c0 Mali: = regulator_set_voltage: 1025000, 1025000
- <7>[11055.626006] c0 max77686: id=29, org=27, val=22
- <7>[11055.627599] c0 max77686_get_voltage: id=29, val=22
- <7>[11055.960160] c3 hub 1-0:1.0: hub_suspend
- <7>[11055.960192] c3 usb usb1: bus auto-suspend
- <7>[11055.960214] c3 s5p-ohci s5p-ohci: suspend root hub
- <6>[11056.026204] c0 ssp_sensorhub_list: 1, 1, 7, 0
- <6>[11056.026281] c3 ssp_sensorhub_read: 1, 1, 7, 0
- <7>[11056.100689] c0 max77686: id=27, org=39, val=32
- <5>[11056.261983] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11056.262021] c3 [TSP] DVFS On![8]
- <5>[11056.394168] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11056.490063] c3 [TSP] DVFS Off!Mali: Mali frequency 266
- <4>[11056.575407] c0 Mali: = regulator_set_voltage: 975000, 975000
- <7>[11056.576017] c0 max77686: id=29, org=22, val=1e
- <7>[11056.577579] c0 max77686_get_voltage: id=29, val=1e
- <4>[11057.075370] c0 Mali: Mali frequency 160
- <4>[11057.075394] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11057.076004] c0 max77686: id=29, org=1e, val=1c
- <7>[11057.077577] c0 max77686_get_voltage: id=29, val=1c
- <5>[11057.267588] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11057.267625] c3 [TSP] DVFS On![8]Mali: = regulator_set_voltage: 975000, 975000
- <7>[11057.445652] c3 max77686: id=29, org=1c, val=1e
- <7>[11057.447218] c0 max77686_get_voltage: id=29, val=1e
- <4>[11057.447572] c0 Mali: Mali frequency 266
- <6>[11057.465048] c3 [TSP] change_dvfs_lock
- <5>[11057.487166] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11057.585041] c3 [TSP] DVFS Off!
- <7>[11057.705676] c0 max77686: id=27, org=32, val=39Mali: Mali frequency 160
- <4>[11057.945396] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11057.945996] c0 max77686: id=29, org=1e, val=1c
- <7>[11057.947552] c0 max77686_get_voltage: id=29, val=1c
- <7>[11058.000704] c0 max77686: id=27, org=39, val=32
- <6>[11058.611353] c3 mdm_modem_ioctl: Powering on mdm
- <6>[11058.611379] c3 request_boot_lock_set
- <3>[11058.611401] c3 mdm_do_soft_power_on: soft resetting mdm modem
- <6>[11058.611427] c3 mdm_peripheral_disconnect
- <6>[11058.611513] c3 s5p-ohci s5p-ohci: remove, state 4
- <7>[11058.611545] c3 s5p-ohci s5p-ohci: roothub graceful disconnect
- <6>[11058.611584] c3 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xac/0x160
- <6>[11058.611619] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11058.611648] c3 usb usb1: unregistering device
- <7>[11058.611670] c3 usb usb1: unregistering interface 1-0:1.0
- <7>[11058.612164] c3 usb usb1: usb_disable_device nuking all URBs
- <7>[11058.636309] c3 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11058.636337] c3 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11058.636370] c3 s5p-ohci s5p-ohci: control 0x4c3 RWE HCFS=suspend CBSR=3
- <7>[11058.636402] c3 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11058.636429] c3 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11058.636455] c3 s5p-ohci s5p-ohci: intrenable 0x0000005a RHSC UE RD WDH
- <7>[11058.636486] c3 s5p-ohci s5p-ohci: hcca frame #044d
- <7>[11058.636512] c3 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11058.636543] c3 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11058.636573] c3 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11058.636601] c3 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11058.636632] c3 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11058.636663] c3 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <6>[11058.636741] c3 s5p-ohci s5p-ohci: USB bus 1 deregistered
- <6>[11058.655419] c0 s5p-ohci s5p-ohci: still being used(18)
- <6>[11058.690033] c0 mdm_peripheral_connect
- <6>[11058.690393] c0 set hsic lpa phy init
- <6>[11058.690415] c0 s5p-ehci s5p-ehci: usb phy usage(18)
- <3>[11058.690438] c0 s5p-ehci s5p-ehci: Already power on PHY
- <7>[11058.690463] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11058.690503] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <7>[11058.690533] c0 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000
- <7>[11058.690563] c0 s5p-ehci s5p-ehci: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
- <7>[11058.690602] c0 s5p-ehci s5p-ehci: reset hcc_params 2a016 thresh 1 uframes 256/512/1024 park LPM
- <6>[11058.690639] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller
- <7>[11058.690719] c0 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11058.690781] c0 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11058.690821] c0 drivers/usb/core/inode.c: creating file '001'
- <6>[11058.691161] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- <7>[11058.691264] c0 s5p-ehci s5p-ehci: park 0
- <7>[11058.691283] c0 s5p-ehci s5p-ehci: support lpm
- <6>[11058.691319] c0 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
- <7>[11058.691350] c0 s5p-ehci s5p-ehci: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
- <7>[11058.750631] c0 max77686: id=27, org=32, val=39
- <7>[11058.769000] c3 i2s_txctrl: Turn Off - spr is no active
- <6>[11058.769713] c3 audss_reg_save: SRC[0x1], DIV[0xf13], GATE[0x42]
- <6>[11058.769741] c3 audss_clk_enable(0): SRC[0x1], DIV[0xf13], GATE[0x42]
- <5>[11058.886494] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11058.886532] c3 [TSP] DVFS On![8]
- <3>[11059.029221] c0 s5p-ehci s5p-ehci: startup error -110
- <6>[11059.029258] c0 s5p-ehci s5p-ehci: USB bus 1 deregistered
- <4>[11059.030035] c3 Mali: = regulator_set_voltage: 975000, 975000
- <7>[11059.030642] c0 max77686: id=29, org=1c, val=1e
- <7>[11059.032202] c0 max77686_get_voltage: id=29, val=1e
- <4>[11059.032558] c0 Mali: Mali frequency 266
- <3>[11059.050410] c0 s5p-ehci s5p-ehci: Failed to add USB HCD
- <4>[11059.050456] c0 s5p-ehci: probe of s5p-ehci failed with error -110
- <6>[11059.050861] c0 s5p-ohci s5p-ohci: usb phy usage(22)
- <3>[11059.050883] c0 s5p-ohci s5p-ohci: Already power on PHY
- <7>[11059.050906] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11059.050963] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <6>[11059.050990] c0 s5p-ohci s5p-ohci: s5p OHCI
- <7>[11059.051062] c0 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11059.051110] c0 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11059.051146] c0 drivers/usb/core/inode.c: creating file '001'
- <6>[11059.051499] c0 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 1
- <7>[11059.051542] c0 s5p-ohci s5p-ohci: ohci_s5p_init, ohci:eaec5508
- <7>[11059.051614] c0 s5p-ohci s5p-ohci: created debug files
- <6>[11059.051657] c0 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
- <7>[11059.051683] c0 s5p-ohci s5p-ohci: ohci_s5p_start, ohci:eaec5508
- <6>[11059.085048] c3 [TSP] change_dvfs_lock
- <7>[11059.100692] c0 max77686: id=27, org=39, val=32
- <7>[11059.109091] c0 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11059.109129] c0 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11059.109168] c0 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3
- <7>[11059.109205] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11059.109237] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11059.109269] c0 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
- <7>[11059.109311] c0 s5p-ohci s5p-ohci: hcca frame #0005
- <7>[11059.110058] c3 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11059.110091] c3 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11059.110122] c3 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11059.110151] c3 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11059.110183] c3 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11059.110216] c3 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <7>[11059.110280] c3 usb usb1: default language 0x0409
- <7>[11059.110315] c3 usb usb1: udev 1, busnum 1, minor = 0
- <6>[11059.110340] c3 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- <6>[11059.110372] c3 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[11059.110406] c3 usb usb1: Product: s5p OHCI
- <6>[11059.110426] c3 usb usb1: Manufacturer: Linux 3.0.31-1665483 ohci_hcd
- <6>[11059.110455] c3 usb usb1: SerialNumber: s5p-ohci
- <6>[11059.110478] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11059.112143] c3 usb usb1: usb_probe_device
- <7>[11059.112171] c3 usb usb1: configuration #1 chosen from 1 choice
- <7>[11059.112220] c3 usb usb1: adding 1-0:1.0 (config #1, interface 0)
- <7>[11059.112938] c3 hub 1-0:1.0: usb_probe_interface
- <7>[11059.112965] c3 hub 1-0:1.0: usb_probe_interface - got id
- <6>[11059.112993] c3 hub 1-0:1.0: USB hub found
- <6>[11059.113029] c3 hub 1-0:1.0: 3 ports detected
- <7>[11059.113052] c3 hub 1-0:1.0: standalone hub
- <7>[11059.113073] c3 hub 1-0:1.0: no power switching (usb 1.0)
- <7>[11059.113098] c3 hub 1-0:1.0: global over-current protection
- <7>[11059.113124] c3 hub 1-0:1.0: power on to power good time: 4ms
- <7>[11059.113157] c3 hub 1-0:1.0: local power source is good
- <7>[11059.113182] c3 hub 1-0:1.0: no over-current condition exists
- <7>[11059.113212] c3 hub 1-0:1.0: trying to enable port power on non-switchable hub
- <7>[11059.114753] c3 drivers/usb/core/inode.c: creating file '001'
- <5>[11059.116109] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <7>[11059.210075] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <6>[11059.215032] c3 [TSP] DVFS Off!
- <5>[11059.786190] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11059.786227] c3 [TSP] DVFS On![8]
- <5>[11059.833519] c3 melfas-ts 3-0048: R(M)(60) [ 0]Mali: Mali frequency 160
- <4>[11059.925379] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11059.925986] c0 max77686: id=29, org=1e, val=1c
- <7>[11059.927547] c0 max77686_get_voltage: id=29, val=1c
- <6>[11059.935167] c3 [TSP] DVFS Off!
- <6>[11060.040064] c0 [SSP]: debug_work_func(65) - Sensor state: 0xef, RC: 0, MS: 0
- <6>[11060.040105] c0 0 : -141, 667, 813 (200ms)
- <6>[11060.040126] c0 6 : 77, 86, 42, 65 (200ms)
- <4>[11060.225045] c0 Mali: = regulator_set_voltage: 975000, 975000
- <7>[11060.225669] c0 max77686: id=29, org=1c, val=1e
- <7>[11060.227245] c0 max77686_get_voltage: id=29, val=1e
- <4>[11060.227592] c0 Mali: Mali frequency 266
- <7>[11060.250037] c3 s5p-ohci s5p-ohci: auto-stop root hub
- <5>[11060.348878] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11060.348929] c3 [TSP] DVFS On![8]
- <5>[11060.407684] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11060.505059] c3 [TSP] DVFS Off!Mali: Mali frequency 160
- <4>[11060.725391] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11060.726003] c0 max77686: id=29, org=1e, val=1c
- <7>[11060.727590] c0 max77686_get_voltage: id=29, val=1c
- <4>[11060.825038] c0 Mali: = regulator_set_voltage: 975000, 975000
- <7>[11060.825656] c0 max77686: id=29, org=1c, val=1e
- <7>[11060.827248] c0 max77686_get_voltage: id=29, val=1e
- <4>[11060.827592] c0 Mali: Mali frequency 266
- <6>[11061.125806] c0 ssp_sensorhub_list: 1, 1, 7, -1
- <6>[11061.125894] c3 ssp_sensorhub_read: 1, 1, 7, -1
- <5>[11061.293740] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11061.293790] c3 [TSP] DVFS On![8]Mali: Mali frequency 160
- <4>[11061.325379] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11061.325985] c0 max77686: id=29, org=1e, val=1c
- <7>[11061.327546] c0 max77686_get_voltage: id=29, val=1c
- <5>[11061.342144] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11061.368349] c0 ssp_sensorhub_list: 1, 1, 7, 0
- <6>[11061.368432] c3 ssp_sensorhub_read: 1, 1, 7, 0Mali: = regulator_set_voltage: 975000, 975000
- <7>[11061.425648] c0 max77686: id=29, org=1c, val=1e
- <7>[11061.427214] c0 max77686_get_voltage: id=29, val=1e
- <4>[11061.427567] c0 Mali: Mali frequency 266
- <6>[11061.440051] c3 [TSP] DVFS Off!
- <6>[11061.546188] c0 ssp_sensorhub_list: 1, 1, 7, -1
- <6>[11061.546283] c3 ssp_sensorhub_read: 1, 1, 7, -1
- <7>[11061.700695] c0 max77686: id=27, org=32, val=39
- <7>[11061.800722] c0 max77686: id=27, org=39, val=32Mali: Mali frequency 160
- <4>[11061.925374] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11061.925981] c0 max77686: id=29, org=1e, val=1c
- <7>[11061.927541] c0 max77686_get_voltage: id=29, val=1c
- <7>[11061.960057] c3 hub 1-0:1.0: hub_suspend
- <7>[11061.960088] c3 usb usb1: bus auto-suspend
- <7>[11061.960111] c3 s5p-ohci s5p-ohci: suspend root hub
- <4>[11063.681694] c0 !@Sync 368
- <6>[11064.316329] c3 mdm_modem_ioctl: Powering on mdm
- <6>[11064.316354] c3 request_boot_lock_set
- <3>[11064.316377] c3 mdm_do_soft_power_on: soft resetting mdm modem
- <6>[11064.316402] c3 mdm_peripheral_disconnect
- <6>[11064.316489] c3 s5p-ohci s5p-ohci: remove, state 4
- <7>[11064.316522] c3 s5p-ohci s5p-ohci: roothub graceful disconnect
- <6>[11064.316563] c3 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xac/0x160
- <6>[11064.316598] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11064.316626] c3 usb usb1: unregistering device
- <7>[11064.316647] c3 usb usb1: unregistering interface 1-0:1.0
- <7>[11064.316972] c3 usb usb1: usb_disable_device nuking all URBs
- <7>[11064.326296] c3 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11064.326324] c3 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11064.326357] c3 s5p-ohci s5p-ohci: control 0x4c3 RWE HCFS=suspend CBSR=3
- <7>[11064.326388] c3 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11064.326415] c3 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11064.326443] c3 s5p-ohci s5p-ohci: intrenable 0x0000005a RHSC UE RD WDH
- <7>[11064.326475] c3 s5p-ohci s5p-ohci: hcca frame #0479
- <7>[11064.326500] c3 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11064.326531] c3 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11064.326561] c3 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11064.326590] c3 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11064.326620] c3 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11064.326651] c3 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <6>[11064.326729] c3 s5p-ohci s5p-ohci: USB bus 1 deregistered
- <6>[11064.345322] c3 s5p-ohci s5p-ohci: still being used(18)
- <6>[11064.380040] c3 mdm_peripheral_connect
- <6>[11064.380387] c3 set hsic lpa phy init
- <6>[11064.380410] c3 s5p-ehci s5p-ehci: usb phy usage(18)
- <3>[11064.380433] c3 s5p-ehci s5p-ehci: Already power on PHY
- <7>[11064.380458] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11064.380498] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <7>[11064.380528] c3 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000
- <7>[11064.380557] c3 s5p-ehci s5p-ehci: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
- <7>[11064.380596] c3 s5p-ehci s5p-ehci: reset hcc_params 2a016 thresh 1 uframes 256/512/1024 park LPM
- <6>[11064.380633] c3 s5p-ehci s5p-ehci: S5P EHCI Host Controller
- <7>[11064.380710] c3 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11064.380770] c3 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11064.380810] c3 drivers/usb/core/inode.c: creating file '001'
- <6>[11064.381153] c3 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- <7>[11064.381256] c3 s5p-ehci s5p-ehci: park 0
- <7>[11064.381276] c3 s5p-ehci s5p-ehci: support lpm
- <6>[11064.381311] c3 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
- <7>[11064.381342] c3 s5p-ehci s5p-ehci: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
- <7>[11064.495636] c0 max77686: id=27, org=32, val=39
- <3>[11064.710884] c3 s5p-ehci s5p-ehci: startup error -110
- <6>[11064.710915] c3 s5p-ehci s5p-ehci: USB bus 1 deregistered
- <3>[11064.760377] c0 s5p-ehci s5p-ehci: Failed to add USB HCD
- <4>[11064.760422] c0 s5p-ehci: probe of s5p-ehci failed with error -110
- <6>[11064.760818] c0 s5p-ohci s5p-ohci: usb phy usage(22)
- <3>[11064.760841] c0 s5p-ohci s5p-ohci: Already power on PHY
- <7>[11064.760865] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11064.760903] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <6>[11064.760930] c0 s5p-ohci s5p-ohci: s5p OHCI
- <7>[11064.760995] c0 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11064.761042] c0 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11064.761078] c0 drivers/usb/core/inode.c: creating file '001'
- <6>[11064.761391] c0 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 1
- <7>[11064.761429] c0 s5p-ohci s5p-ohci: ohci_s5p_init, ohci:eaec4908
- <7>[11064.761500] c0 s5p-ohci s5p-ohci: created debug files
- <6>[11064.761535] c0 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
- <7>[11064.761560] c0 s5p-ohci s5p-ohci: ohci_s5p_start, ohci:eaec4908
- <7>[11064.805686] c0 max77686: id=27, org=39, val=32
- <7>[11064.819032] c0 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11064.819060] c0 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11064.819092] c0 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3
- <7>[11064.819123] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11064.819150] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11064.819176] c0 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
- <7>[11064.819208] c0 s5p-ohci s5p-ohci: hcca frame #0005
- <7>[11064.819233] c0 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11064.819265] c0 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11064.819294] c0 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11064.819322] c0 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11064.819354] c0 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11064.819385] c0 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <7>[11064.819440] c0 usb usb1: default language 0x0409
- <7>[11064.819474] c0 usb usb1: udev 1, busnum 1, minor = 0
- <6>[11064.819498] c0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- <6>[11064.819529] c0 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[11064.819562] c0 usb usb1: Product: s5p OHCI
- <6>[11064.819581] c0 usb usb1: Manufacturer: Linux 3.0.31-1665483 ohci_hcd
- <6>[11064.819609] c0 usb usb1: SerialNumber: s5p-ohci
- <6>[11064.819631] c0 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11064.820952] c0 usb usb1: usb_probe_device
- <7>[11064.820976] c0 usb usb1: configuration #1 chosen from 1 choice
- <7>[11064.821019] c0 usb usb1: adding 1-0:1.0 (config #1, interface 0)
- <7>[11064.821426] c0 hub 1-0:1.0: usb_probe_interface
- <7>[11064.821452] c0 hub 1-0:1.0: usb_probe_interface - got id
- <6>[11064.821481] c0 hub 1-0:1.0: USB hub found
- <6>[11064.821512] c0 hub 1-0:1.0: 3 ports detected
- <7>[11064.821532] c0 hub 1-0:1.0: standalone hub
- <7>[11064.821552] c0 hub 1-0:1.0: no power switching (usb 1.0)
- <7>[11064.821576] c0 hub 1-0:1.0: global over-current protection
- <7>[11064.821601] c0 hub 1-0:1.0: power on to power good time: 4ms
- <7>[11064.821632] c0 hub 1-0:1.0: local power source is good
- <7>[11064.821656] c0 hub 1-0:1.0: no over-current condition exists
- <7>[11064.821682] c0 hub 1-0:1.0: trying to enable port power on non-switchable hub
- <7>[11064.821990] c0 drivers/usb/core/inode.c: creating file '001'
- <7>[11064.920094] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <7>[11066.000037] c0 s5p-ohci s5p-ohci: auto-stop root hub
- <7>[11066.960205] c3 hub 1-0:1.0: hub_suspend
- <7>[11066.960244] c3 usb usb1: bus auto-suspend
- <7>[11066.960271] c3 s5p-ohci s5p-ohci: suspend root hub
- <5>[11069.226165] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11069.226203] c3 [TSP] DVFS On![8]Mali: = regulator_set_voltage: 975000, 975000
- <7>[11069.243946] c0 max77686: id=29, org=1c, val=1e
- <7>[11069.245511] c0 max77686_get_voltage: id=29, val=1e
- <4>[11069.245855] c0 Mali: Mali frequency 266
- <5>[11069.346061] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11069.445045] c3 [TSP] DVFS Off!Mali: Mali frequency 160
- <4>[11069.745412] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11069.746019] c0 max77686: id=29, org=1e, val=1c
- <7>[11069.747592] c0 max77686_get_voltage: id=29, val=1c
- <4>[11069.845059] c3 Mali: = regulator_set_voltage: 975000, 975000
- <7>[11069.845703] c3 max77686: id=29, org=1c, val=1e
- <7>[11069.847319] c0 max77686_get_voltage: id=29, val=1e
- <4>[11069.847687] c0 Mali: Mali frequency 266
- <6>[11070.026231] c0 mdm_modem_ioctl: Powering on mdm
- <6>[11070.026256] c0 request_boot_lock_set
- <3>[11070.026279] c0 mdm_do_soft_power_on: soft resetting mdm modem
- <6>[11070.026305] c0 mdm_peripheral_disconnect
- <6>[11070.026390] c0 s5p-ohci s5p-ohci: remove, state 4
- <7>[11070.026425] c0 s5p-ohci s5p-ohci: roothub graceful disconnect
- <6>[11070.026465] c0 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xac/0x160
- <6>[11070.026500] c0 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11070.026528] c0 usb usb1: unregistering device
- <7>[11070.026550] c0 usb usb1: unregistering interface 1-0:1.0
- <7>[11070.026924] c0 usb usb1: usb_disable_device nuking all URBs
- <7>[11070.076363] c0 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11070.076392] c0 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11070.076426] c0 s5p-ohci s5p-ohci: control 0x4c3 RWE HCFS=suspend CBSR=3
- <7>[11070.076459] c0 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11070.076486] c0 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11070.076515] c0 s5p-ohci s5p-ohci: intrenable 0x0000005a RHSC UE RD WDH
- <7>[11070.076547] c0 s5p-ohci s5p-ohci: hcca frame #04a2
- <7>[11070.076572] c0 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11070.076606] c0 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11070.076636] c0 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11070.076664] c0 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11070.076698] c0 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11070.076728] c0 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <6>[11070.076808] c0 s5p-ohci s5p-ohci: USB bus 1 deregistered
- <6>[11070.100353] c3 s5p-ohci s5p-ohci: still being used(18)
- <6>[11070.135048] c3 mdm_peripheral_connect
- <6>[11070.135385] c3 set hsic lpa phy init
- <6>[11070.135407] c3 s5p-ehci s5p-ehci: usb phy usage(18)
- <3>[11070.135431] c3 s5p-ehci s5p-ehci: Already power on PHY
- <7>[11070.135456] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11070.135495] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <7>[11070.135525] c3 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000
- <7>[11070.135555] c3 s5p-ehci s5p-ehci: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
- <7>[11070.135593] c3 s5p-ehci s5p-ehci: reset hcc_params 2a016 thresh 1 uframes 256/512/1024 park LPM
- <6>[11070.135631] c3 s5p-ehci s5p-ehci: S5P EHCI Host Controller
- <7>[11070.135710] c3 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11070.135774] c3 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11070.135814] c3 drivers/usb/core/inode.c: creating file '001'
- <6>[11070.136168] c3 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- <7>[11070.136269] c3 s5p-ehci s5p-ehci: park 0
- <7>[11070.136289] c3 s5p-ehci s5p-ehci: support lpm
- <6>[11070.136324] c3 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
- <7>[11070.136355] c3 s5p-ehci s5p-ehci: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
- <7>[11070.205638] c0 max77686: id=27, org=32, val=39
- <3>[11070.465108] c3 s5p-ehci s5p-ehci: startup error -110
- <6>[11070.465137] c3 s5p-ehci s5p-ehci: USB bus 1 deregistered
- <7>[11070.500700] c0 max77686: id=27, org=39, val=32
- <3>[11070.505687] c3 s5p-ehci s5p-ehci: Failed to add USB HCD
- <4>[11070.505775] c3 s5p-ehci: probe of s5p-ehci failed with error -110
- <6>[11070.506414] c3 s5p-ohci s5p-ohci: usb phy usage(22)
- <3>[11070.506441] c3 s5p-ohci s5p-ohci: Already power on PHY
- <7>[11070.506468] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11070.506516] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <6>[11070.506550] c3 s5p-ohci s5p-ohci: s5p OHCI
- <7>[11070.506632] c3 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11070.506684] c3 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11070.506724] c3 drivers/usb/core/inode.c: creating file '001'
- <6>[11070.507098] c3 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 1
- <7>[11070.507140] c3 s5p-ohci s5p-ohci: ohci_s5p_init, ohci:e78be908
- <7>[11070.507220] c3 s5p-ohci s5p-ohci: created debug files
- <6>[11070.507261] c3 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
- <7>[11070.507291] c3 s5p-ohci s5p-ohci: ohci_s5p_start, ohci:e78be908
- <7>[11070.564034] c3 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11070.564063] c3 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11070.564102] c3 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3
- <7>[11070.564135] c3 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11070.564162] c3 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11070.564193] c3 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
- <7>[11070.564231] c3 s5p-ohci s5p-ohci: hcca frame #0005
- <7>[11070.564257] c3 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11070.564289] c3 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11070.564325] c3 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11070.564357] c3 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11070.564388] c3 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11070.564423] c3 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <7>[11070.564484] c3 usb usb1: default language 0x0409
- <7>[11070.564517] c3 usb usb1: udev 1, busnum 1, minor = 0
- <6>[11070.564541] c3 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- <6>[11070.564579] c3 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[11070.564616] c3 usb usb1: Product: s5p OHCI
- <6>[11070.564636] c3 usb usb1: Manufacturer: Linux 3.0.31-1665483 ohci_hcd
- <6>[11070.564666] c3 usb usb1: SerialNumber: s5p-ohci
- <6>[11070.564693] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11070.565205] c3 usb usb1: usb_probe_device
- <7>[11070.565231] c3 usb usb1: configuration #1 chosen from 1 choice
- <7>[11070.565280] c3 usb usb1: adding 1-0:1.0 (config #1, interface 0)
- <7>[11070.565995] c3 hub 1-0:1.0: usb_probe_interface
- <7>[11070.566023] c3 hub 1-0:1.0: usb_probe_interface - got id
- <6>[11070.566053] c3 hub 1-0:1.0: USB hub found
- <6>[11070.566085] c3 hub 1-0:1.0: 3 ports detected
- <7>[11070.566110] c3 hub 1-0:1.0: standalone hub
- <7>[11070.566133] c3 hub 1-0:1.0: no power switching (usb 1.0)
- <7>[11070.566159] c3 hub 1-0:1.0: global over-current protection
- <7>[11070.566184] c3 hub 1-0:1.0: power on to power good time: 4ms
- <7>[11070.566220] c3 hub 1-0:1.0: local power source is good
- <7>[11070.566248] c3 hub 1-0:1.0: no over-current condition exists
- <7>[11070.566276] c3 hub 1-0:1.0: trying to enable port power on non-switchable hub
- <7>[11070.566593] c3 drivers/usb/core/inode.c: creating file '001'
- <7>[11070.665082] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <4>[11070.680356] c0 Mali: Mali frequency 160
- <4>[11070.680377] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11070.680981] c0 max77686: id=29, org=1e, val=1c
- <7>[11070.682545] c0 max77686_get_voltage: id=29, val=1c
- <6>[11071.040048] c0 [SSP]: debug_work_func(64) - Sensor state: 0xef, RC: 0, MS: 0
- <6>[11071.040083] c0 0 : 1, -12, 1102 (200ms)
- <6>[11071.040103] c0 6 : 409, 402, 245, 309 (200ms)
- <5>[11071.726736] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11071.726778] c3 [TSP] DVFS On![8]
- <7>[11071.750035] c3 s5p-ohci s5p-ohci: auto-stop root hub
- <6>[11071.925047] c3 [TSP] change_dvfs_lock
- <5>[11072.289487] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11072.385058] c3 [TSP] DVFS Off!
- <7>[11072.650694] c0 max77686: id=27, org=32, val=39
- <7>[11072.960053] c3 hub 1-0:1.0: hub_suspend
- <7>[11072.960089] c3 usb usb1: bus auto-suspend
- <7>[11072.960109] c3 s5p-ohci s5p-ohci: suspend root hub
- <7>[11073.000700] c0 max77686: id=27, org=39, val=35
- <5>[11073.032483] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11073.032525] c3 [TSP] DVFS On![8]
- <5>[11073.091254] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11073.190062] c3 [TSP] DVFS Off!Mali: = regulator_set_voltage: 975000, 975000
- <7>[11073.195702] c0 max77686: id=29, org=1c, val=1e
- <7>[11073.197273] c0 max77686_get_voltage: id=29, val=1e
- <4>[11073.197619] c0 Mali: Mali frequency 266
- <4>[11073.995361] c0 Mali: Mali frequency 160
- <4>[11073.995384] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11073.995990] c0 max77686: id=29, org=1e, val=1c
- <7>[11073.997551] c0 max77686_get_voltage: id=29, val=1c
- <7>[11074.080708] c0 max77686: id=27, org=35, val=32
- <5>[11075.030498] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11075.030536] c3 [TSP] DVFS On![8]
- <7>[11075.034760] c0 max77686: id=27, org=32, val=35Mali: = regulator_set_voltage: 975000, 975000
- <7>[11075.076970] c0 max77686: id=29, org=1c, val=1e
- <7>[11075.078539] c0 max77686_get_voltage: id=29, val=1e
- <4>[11075.079599] c3 Mali: Mali frequency 266
- <5>[11075.102274] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11075.200046] c3 [TSP] DVFS Off!Mali: Mali frequency 160
- <4>[11075.575405] c3 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11075.576020] c0 max77686: id=29, org=1e, val=1c
- <7>[11075.577606] c0 max77686_get_voltage: id=29, val=1c
- <6>[11075.771326] c3 mdm_modem_ioctl: Powering on mdm
- <6>[11075.771355] c3 request_boot_lock_set
- <3>[11075.771377] c3 mdm_do_soft_power_on: soft resetting mdm modem
- <6>[11075.771403] c3 mdm_peripheral_disconnect
- <6>[11075.771490] c3 s5p-ohci s5p-ohci: remove, state 4
- <7>[11075.771525] c3 s5p-ohci s5p-ohci: roothub graceful disconnect
- <6>[11075.771567] c3 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xac/0x160
- <6>[11075.771602] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11075.771635] c3 usb usb1: unregistering device
- <7>[11075.771660] c3 usb usb1: unregistering interface 1-0:1.0
- <7>[11075.772001] c3 usb usb1: usb_disable_device nuking all URBs
- <7>[11075.791176] c3 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11075.791210] c3 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11075.791250] c3 s5p-ohci s5p-ohci: control 0x4c3 RWE HCFS=suspend CBSR=3
- <7>[11075.791280] c3 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11075.791307] c3 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11075.791338] c3 s5p-ohci s5p-ohci: intrenable 0x0000005a RHSC UE RD WDH
- <7>[11075.791373] c3 s5p-ohci s5p-ohci: hcca frame #04a7
- <7>[11075.791398] c3 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11075.791432] c3 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11075.791467] c3 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11075.791496] c3 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11075.791528] c3 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11075.791563] c3 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <6>[11075.791640] c3 s5p-ohci s5p-ohci: USB bus 1 deregistered
- <6>[11075.820330] c3 s5p-ohci s5p-ohci: still being used(18)
- <6>[11075.855031] c3 mdm_peripheral_connect
- <6>[11075.855500] c3 set hsic lpa phy init
- <6>[11075.855526] c3 s5p-ehci s5p-ehci: usb phy usage(18)
- <3>[11075.855549] c3 s5p-ehci s5p-ehci: Already power on PHY
- <7>[11075.855573] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11075.855617] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <7>[11075.855652] c3 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000
- <7>[11075.855681] c3 s5p-ehci s5p-ehci: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
- <7>[11075.855722] c3 s5p-ehci s5p-ehci: reset hcc_params 2a016 thresh 1 uframes 256/512/1024 park LPM
- <6>[11075.855765] c3 s5p-ehci s5p-ehci: S5P EHCI Host Controller
- <7>[11075.855847] c3 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11075.855915] c3 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11075.855960] c3 drivers/usb/core/inode.c: creating file '001'
- <6>[11075.856315] c3 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- <7>[11075.856417] c3 s5p-ehci s5p-ehci: park 0
- <7>[11075.856440] c3 s5p-ehci s5p-ehci: support lpm
- <6>[11075.856479] c3 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
- <7>[11075.856510] c3 s5p-ehci s5p-ehci: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
- <7>[11075.900626] c0 max77686: id=27, org=35, val=39
- <5>[11075.951718] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11075.951757] c3 [TSP] DVFS On![8]
- <5>[11075.998812] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11076.095038] c3 [TSP] DVFS Off!Mali: = regulator_set_voltage: 975000, 975000
- <7>[11076.110650] c0 max77686: id=29, org=1c, val=1e
- <7>[11076.112250] c0 max77686_get_voltage: id=29, val=1e
- <4>[11076.112598] c0 Mali: Mali frequency 266
- <3>[11076.187134] c3 s5p-ehci s5p-ehci: startup error -110
- <6>[11076.187168] c3 s5p-ehci s5p-ehci: USB bus 1 deregistered
- <3>[11076.210760] c3 s5p-ehci s5p-ehci: Failed to add USB HCD
- <4>[11076.210815] c3 s5p-ehci: probe of s5p-ehci failed with error -110
- <6>[11076.211376] c3 s5p-ohci s5p-ohci: usb phy usage(22)
- <3>[11076.211401] c3 s5p-ohci s5p-ohci: Already power on PHY
- <7>[11076.211427] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11076.211468] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <6>[11076.211497] c3 s5p-ohci s5p-ohci: s5p OHCI
- <7>[11076.211578] c3 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11076.211634] c3 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11076.211675] c3 drivers/usb/core/inode.c: creating file '001'
- <6>[11076.212132] c3 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 1
- <7>[11076.212177] c3 s5p-ohci s5p-ohci: ohci_s5p_init, ohci:e78be908
- <7>[11076.212264] c3 s5p-ohci s5p-ohci: created debug files
- <6>[11076.212308] c3 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
- <7>[11076.212336] c3 s5p-ohci s5p-ohci: ohci_s5p_start, ohci:e78be908
- <7>[11076.269050] c3 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11076.269079] c3 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11076.269110] c3 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3
- <7>[11076.269140] c3 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11076.269166] c3 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11076.269192] c3 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
- <7>[11076.269225] c3 s5p-ohci s5p-ohci: hcca frame #0005
- <7>[11076.269249] c3 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11076.269280] c3 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11076.269310] c3 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11076.269338] c3 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11076.269368] c3 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11076.269397] c3 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <7>[11076.269455] c3 usb usb1: default language 0x0409
- <7>[11076.269487] c3 usb usb1: udev 1, busnum 1, minor = 0
- <6>[11076.269511] c3 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- <6>[11076.269542] c3 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[11076.269574] c3 usb usb1: Product: s5p OHCI
- <6>[11076.269594] c3 usb usb1: Manufacturer: Linux 3.0.31-1665483 ohci_hcd
- <6>[11076.269622] c3 usb usb1: SerialNumber: s5p-ohci
- <6>[11076.269644] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11076.270322] c3 usb usb1: usb_probe_device
- <7>[11076.270351] c3 usb usb1: configuration #1 chosen from 1 choice
- <7>[11076.270401] c3 usb usb1: adding 1-0:1.0 (config #1, interface 0)
- <7>[11076.271270] c3 hub 1-0:1.0: usb_probe_interface
- <7>[11076.271296] c3 hub 1-0:1.0: usb_probe_interface - got id
- <6>[11076.271328] c3 hub 1-0:1.0: USB hub found
- <6>[11076.271357] c3 hub 1-0:1.0: 3 ports detected
- <7>[11076.271378] c3 hub 1-0:1.0: standalone hub
- <7>[11076.271398] c3 hub 1-0:1.0: no power switching (usb 1.0)
- <7>[11076.271422] c3 hub 1-0:1.0: global over-current protection
- <7>[11076.271447] c3 hub 1-0:1.0: power on to power good time: 4ms
- <7>[11076.271480] c3 hub 1-0:1.0: local power source is good
- <7>[11076.271504] c3 hub 1-0:1.0: no over-current condition exists
- <7>[11076.271532] c3 hub 1-0:1.0: trying to enable port power on non-switchable hub
- <7>[11076.271855] c3 drivers/usb/core/inode.c: creating file '001'
- <7>[11076.300713] c0 max77686: id=27, org=39, val=35
- <7>[11076.370082] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <4>[11076.910349] c0 Mali: Mali frequency 160
- <4>[11076.910373] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11076.910976] c0 max77686: id=29, org=1e, val=1c
- <7>[11076.912539] c0 max77686_get_voltage: id=29, val=1c
- <7>[11076.960693] c0 max77686: id=27, org=35, val=32
- <7>[11077.500030] c3 s5p-ohci s5p-ohci: auto-stop root hub
- <5>[11078.631494] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11078.631531] c3 [TSP] DVFS On![8]
- <7>[11078.636763] c0 max77686: id=27, org=32, val=35
- <5>[11078.655682] c3 melfas-ts 3-0048: R(M)(60) [ 0]Mali: = regulator_set_voltage: 975000, 975000
- <7>[11078.661099] c0 max77686: id=29, org=1c, val=1e
- <7>[11078.662659] c0 max77686_get_voltage: id=29, val=1e
- <4>[11078.662999] c0 Mali: Mali frequency 266
- <6>[11078.755080] c3 [TSP] DVFS Off!
- <7>[11078.805682] c0 max77686: id=27, org=35, val=39
- <7>[11078.900737] c0 max77686: id=27, org=39, val=35
- <7>[11078.960044] c3 hub 1-0:1.0: hub_suspend
- <7>[11078.960077] c3 usb usb1: bus auto-suspend
- <7>[11078.960099] c3 s5p-ohci s5p-ohci: suspend root hub
- <4>[11079.160373] c0 Mali: Mali frequency 160
- <4>[11079.160397] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11079.161005] c0 max77686: id=29, org=1e, val=1c
- <7>[11079.162574] c0 max77686_get_voltage: id=29, val=1c
- <7>[11079.650682] c0 max77686: id=27, org=35, val=32
- <5>[11081.037009] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11081.037048] c3 [TSP] DVFS On![8]
- <7>[11081.041957] c0 max77686: id=27, org=32, val=35Mali: = regulator_set_voltage: 975000, 975000
- <7>[11081.096805] c0 max77686: id=29, org=1c, val=1e
- <7>[11081.098438] c0 max77686_get_voltage: id=29, val=1e
- <4>[11081.098779] c0 Mali: Mali frequency 266
- <5>[11081.132152] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <7>[11081.150666] c0 max77686: id=27, org=35, val=39
- <6>[11081.230065] c3 [TSP] DVFS Off!
- <7>[11081.300717] c0 max77686: id=27, org=39, val=35
- <6>[11081.476320] c3 mdm_modem_ioctl: Powering on mdm
- <6>[11081.476346] c3 request_boot_lock_set
- <3>[11081.476369] c3 mdm_do_soft_power_on: soft resetting mdm modem
- <6>[11081.476394] c3 mdm_peripheral_disconnect
- <6>[11081.476480] c3 s5p-ohci s5p-ohci: remove, state 4
- <7>[11081.476514] c3 s5p-ohci s5p-ohci: roothub graceful disconnect
- <6>[11081.476553] c3 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xac/0x160
- <6>[11081.476587] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11081.476615] c3 usb usb1: unregistering device
- <7>[11081.476637] c3 usb usb1: unregistering interface 1-0:1.0
- <7>[11081.477094] c3 usb usb1: usb_disable_device nuking all URBs
- <7>[11081.496290] c3 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11081.496321] c3 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11081.496356] c3 s5p-ohci s5p-ohci: control 0x4c3 RWE HCFS=suspend CBSR=3
- <7>[11081.496390] c3 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11081.496418] c3 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11081.496444] c3 s5p-ohci s5p-ohci: intrenable 0x0000005a RHSC UE RD WDH
- <7>[11081.496475] c3 s5p-ohci s5p-ohci: hcca frame #04d3
- <7>[11081.496499] c3 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11081.496529] c3 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11081.496558] c3 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11081.496585] c3 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11081.496615] c3 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11081.496644] c3 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <6>[11081.496726] c3 s5p-ohci s5p-ohci: USB bus 1 deregistered
- <6>[11081.525426] c0 s5p-ohci s5p-ohci: still being used(18)
- <6>[11081.560044] c0 mdm_peripheral_connect
- <6>[11081.560507] c0 set hsic lpa phy init
- <6>[11081.560530] c0 s5p-ehci s5p-ehci: usb phy usage(18)
- <3>[11081.560554] c0 s5p-ehci s5p-ehci: Already power on PHY
- <7>[11081.560578] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11081.560618] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <7>[11081.560648] c0 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000
- <7>[11081.560677] c0 s5p-ehci s5p-ehci: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
- <7>[11081.560714] c0 s5p-ehci s5p-ehci: reset hcc_params 2a016 thresh 1 uframes 256/512/1024 park LPM
- <6>[11081.560752] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller
- <7>[11081.560833] c0 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11081.560900] c0 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11081.560963] c0 drivers/usb/core/inode.c: creating file '001'
- <6>[11081.561337] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- <7>[11081.561438] c0 s5p-ehci s5p-ehci: park 0
- <7>[11081.561457] c0 s5p-ehci s5p-ehci: support lpm
- <6>[11081.561492] c0 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
- <7>[11081.561522] c0 s5p-ehci s5p-ehci: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
- <4>[11081.595366] c3 Mali: Mali frequency 160
- <4>[11081.595390] c3 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11081.595993] c3 max77686: id=29, org=1e, val=1c
- <7>[11081.597552] c3 max77686_get_voltage: id=29, val=1c
- <7>[11081.600624] c0 max77686: id=27, org=35, val=39
- <5>[11081.718794] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11081.718834] c3 [TSP] DVFS On![8]
- <5>[11081.778756] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11081.875035] c3 [TSP] DVFS Off!
- <3>[11081.895797] c0 s5p-ehci s5p-ehci: startup error -110
- <6>[11081.895831] c0 s5p-ehci s5p-ehci: USB bus 1 deregistered
- <3>[11081.925430] c3 s5p-ehci s5p-ehci: Failed to add USB HCD
- <4>[11081.925478] c3 s5p-ehci: probe of s5p-ehci failed with error -110
- <6>[11081.925895] c3 s5p-ohci s5p-ohci: usb phy usage(22)
- <3>[11081.925918] c3 s5p-ohci s5p-ohci: Already power on PHY
- <7>[11081.925942] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11081.925979] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <6>[11081.926011] c3 s5p-ohci s5p-ohci: s5p OHCI
- <7>[11081.926084] c3 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11081.926133] c3 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11081.926172] c3 drivers/usb/core/inode.c: creating file '001'
- <6>[11081.926503] c3 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 1
- <7>[11081.926544] c3 s5p-ohci s5p-ohci: ohci_s5p_init, ohci:e78bd108
- <7>[11081.926616] c3 s5p-ohci s5p-ohci: created debug files
- <6>[11081.926653] c3 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
- <7>[11081.926678] c3 s5p-ohci s5p-ohci: ohci_s5p_start, ohci:e78bd108
- <7>[11081.984047] c3 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11081.984076] c3 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11081.984107] c3 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3
- <7>[11081.984138] c3 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11081.984164] c3 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11081.984190] c3 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
- <7>[11081.984221] c3 s5p-ohci s5p-ohci: hcca frame #0005
- <7>[11081.984245] c3 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11081.984275] c3 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11081.984304] c3 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11081.984331] c3 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11081.984361] c3 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11081.984391] c3 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <7>[11081.984446] c3 usb usb1: default language 0x0409
- <7>[11081.984479] c3 usb usb1: udev 1, busnum 1, minor = 0
- <6>[11081.984502] c3 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- <6>[11081.984532] c3 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[11081.984564] c3 usb usb1: Product: s5p OHCI
- <6>[11081.984583] c3 usb usb1: Manufacturer: Linux 3.0.31-1665483 ohci_hcd
- <6>[11081.984609] c3 usb usb1: SerialNumber: s5p-ohci
- <6>[11081.984630] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11081.986871] c3 usb usb1: usb_probe_device
- <7>[11081.986896] c3 usb usb1: configuration #1 chosen from 1 choice
- <7>[11081.986943] c3 usb usb1: adding 1-0:1.0 (config #1, interface 0)
- <7>[11081.987644] c3 hub 1-0:1.0: usb_probe_interface
- <7>[11081.987676] c3 hub 1-0:1.0: usb_probe_interface - got id
- <6>[11081.987713] c3 hub 1-0:1.0: USB hub found
- <6>[11081.987754] c3 hub 1-0:1.0: 3 ports detected
- <7>[11081.987782] c3 hub 1-0:1.0: standalone hub
- <7>[11081.987807] c3 hub 1-0:1.0: no power switching (usb 1.0)
- <7>[11081.987835] c3 hub 1-0:1.0: global over-current protection
- <7>[11081.987864] c3 hub 1-0:1.0: power on to power good time: 4ms
- <7>[11081.987901] c3 hub 1-0:1.0: local power source is good
- <7>[11081.987929] c3 hub 1-0:1.0: no over-current condition exists
- <7>[11081.987964] c3 hub 1-0:1.0: trying to enable port power on non-switchable hub
- <7>[11081.989197] c3 drivers/usb/core/inode.c: creating file '001'
- <7>[11082.000724] c0 max77686: id=27, org=39, val=35
- <6>[11082.040058] c0 [SSP]: debug_work_func(61) - Sensor state: 0xef, RC: 0, MS: 0
- <6>[11082.040094] c0 0 : 1, -10, 1101 (200ms)
- <6>[11082.040115] c0 6 : 390, 385, 232, 293 (200ms)
- <7>[11082.085067] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <5>[11082.197671] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11082.197715] c3 [TSP] DVFS On![8]
- <5>[11082.293209] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <6>[11082.390038] c3 [TSP] DVFS Off!
- <7>[11082.550688] c0 max77686: id=27, org=35, val=39
- <5>[11082.867636] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11082.867680] c3 [TSP] DVFS On![8]
- <7>[11082.900720] c0 max77686: id=27, org=39, val=35
- <5>[11082.926870] c3 melfas-ts 3-0048: R(M)(60) [ 0]
- <7>[11082.935726] c0 max77686: id=27, org=35, val=39
- <3>[11082.937520] c0 CPU_UP 1
- <4>[11082.939001] c1 CPU1: Booted secondary processor
- <6>[11082.939048] c1 notifier_call_chain : NOTIFY BAD tick_notify
- <3>[11082.939796] c0 CPU_UP 2
- <6>[11082.940027] c1 Switched to NOHz mode on CPU #1
- <4>[11082.941278] c2 CPU2: Booted secondary processor
- <6>[11082.941317] c2 notifier_call_chain : NOTIFY BAD tick_notify
- <6>[11082.945038] c2 Switched to NOHz mode on CPU #2
- <4>[11082.945333] c3 Mali: = regulator_set_voltage: 975000, 975000
- <7>[11082.945945] c0 max77686: id=29, org=1c, val=1e
- <7>[11082.947503] c0 max77686_get_voltage: id=29, val=1e
- <4>[11082.947840] c0 Mali: Mali frequency 266
- <4>[11082.996793] c2 Mali: gpu bottom lock release
- <7>[11083.000049] c3 s5p-ohci s5p-ohci: auto-stop root hub
- <7>[11083.000758] c0 max77686: id=27, org=39, val=35
- <6>[11083.025065] c3 [TSP] DVFS Off!
- <7>[11083.100643] c0 max77686: id=27, org=35, val=39
- <7>[11083.200746] c0 max77686: id=27, org=39, val=35
- <7>[11083.250648] c0 max77686: id=27, org=35, val=39Mali: Mali frequency 160
- <4>[11083.410477] c1 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11083.411112] c1 max77686: id=29, org=1e, val=1c
- <7>[11083.412686] c0 max77686_get_voltage: id=29, val=1c
- <4>[11083.510069] c0 Mali: = regulator_set_voltage: 975000, 975000
- <7>[11083.510704] c0 max77686: id=29, org=1c, val=1e
- <7>[11083.512334] c0 max77686_get_voltage: id=29, val=1e
- <4>[11083.512731] c0 Mali: Mali frequency 266
- <4>[11083.586039] c2 Mali: gpu bottom lock release
- <4>[11083.889011] c2 Mali: gpu bottom lock release
- <7>[11084.000748] c0 max77686: id=27, org=39, val=32
- <7>[11084.085084] c3 hub 1-0:1.0: hub_suspend
- <7>[11084.085127] c3 usb usb1: bus auto-suspend
- <7>[11084.085155] c3 s5p-ohci s5p-ohci: suspend root hub
- <7>[11084.262050] c2 [TouchKey] pressed:1
- <7>[11084.266725] c0 max77686_reg_enable: id=25, pattern=c0
- <7>[11084.267733] c0 [VIB] vibtonz_en is called
- <7>[11084.267760] c0 Motor:tspdrv: ImmVibeSPI_ForceOut_AmpEnable (1)
- <7>[11084.267876] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11084.272920] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11084.277907] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11084.282920] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11084.287929] c0 [VIB] vibtonz_pwm is called(-66)
- <6>[11084.291377] c3 audss_reg_restore: SRC[0x1], DIV[0xf13], GATE[0x42]
- <6>[11084.291414] c3 audss_clk_enable(1): SRC[0x1], DIV[0xf13], GATE[0x1c7]
- <6>[11084.291509] c3 wm8994-codec wm8994-codec: t0_wm1811_aif1_hw_params ++
- <6>[11084.291545] c3 wm8994-codec wm8994-codec: _wm8994_set_fll ++
- <6>[11084.291577] c3 wm8994-codec wm8994-codec: t0_wm1811_aif1_hw_params --
- <6>[11084.291860] c3 I:P:DmaAddr=@2058000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xf2270000
- <7>[11084.292908] c0 [VIB] vibtonz_pwm is called(-66)
- <7>[11084.297977] c0 [VIB] vibtonz_pwm is called(0)
- <7>[11084.298040] c0 max77686_reg_disable: id=25, pattern=c0
- <7>[11084.300355] c0 [VIB] vibtonz_en is called
- <7>[11084.300385] c0 Motor:tspdrv: ImmVibeSPI_ForceOut_AmpDisable (0)
- <4>[11084.310519] c0 Mali: Mali frequency 160
- <4>[11084.310564] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11084.311600] c0 max77686: id=29, org=1e, val=1c
- <7>[11084.313180] c0 max77686_get_voltage: id=29, val=1c
- <7>[11084.333925] c2 [TouchKey] pressed:0
- <7>[11084.362359] c0 i2s_txctrl:Turn on
- <7>[11084.405692] c0 max77686: id=27, org=32, val=39
- <7>[11084.500709] c0 max77686: id=27, org=39, val=32
- <7>[11084.600671] c0 max77686: id=27, org=32, val=39
- <7>[11084.705750] c0 max77686: id=27, org=39, val=35
- <6>[11084.718118] c0 t0_set_ext_main_mic: main_mic bias on = 1
- <4>[11084.768099] c1 Mali: = regulator_set_voltage: 975000, 975000
- <7>[11084.768730] c1 max77686: id=29, org=1c, val=1e
- <7>[11084.770336] c1 max77686_get_voltage: id=29, val=1e
- <4>[11084.770705] c1 Mali: Mali frequency 266
- <7>[11084.800720] c0 max77686: id=27, org=35, val=39
- <6>[11084.820099] c0 wm8994-codec wm8994-codec: main_mic_bias_mod=0: status=1
- <4>[11084.825792] c0 WM8994 AIF1: Not enforcing symmetric_rates due to race
- <6>[11084.825872] c0 wm8994-codec wm8994-codec: t0_wm1811_aif1_hw_params ++
- <6>[11084.825911] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++
- <6>[11084.825947] c0 wm8994-codec wm8994-codec: t0_wm1811_aif1_hw_params --
- <6>[11084.826041] c0 G:C:DmaAddr=@6af40000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffda0000
- <6>[11084.923307] c0 t0_set_ext_main_mic: main_mic bias on = 0
- <6>[11084.923540] c0 wm8994-codec wm8994-codec: main_mic_bias_mod=0: status=0
- <4>[11085.240373] c0 Mali: Mali frequency 160
- <4>[11085.240396] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11085.240998] c0 max77686: id=29, org=1e, val=1c
- <7>[11085.242600] c0 max77686_get_voltage: id=29, val=1c
- <4>[11085.266937] c3 Mali: gpu bottom lock release
- <4>[11085.267926] c3 Mali: = regulator_set_voltage: 975000, 975000
- <7>[11085.268538] c0 max77686: id=29, org=1c, val=1e
- <7>[11085.270097] c0 max77686_get_voltage: id=29, val=1e
- <4>[11085.270437] c0 Mali: Mali frequency 266
- <7>[11085.300702] c0 max77686: id=27, org=39, val=32
- <7>[11085.400664] c0 max77686: id=27, org=32, val=39Mali: gpu bottom lock release
- <4>[11085.740393] c1 Mali: Mali frequency 160
- <4>[11085.740417] c1 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11085.741020] c0 max77686: id=29, org=1e, val=1c
- <7>[11085.742579] c0 max77686_get_voltage: id=29, val=1c
- <5>[11085.835383] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11085.835424] c3 [TSP] DVFS On![8]
- <5>[11085.882583] c3 melfas-ts 3-0048: R(M)(60) [ 0]Mali: = regulator_set_voltage: 975000, 975000
- <7>[11085.896257] c0 max77686: id=29, org=1c, val=1e
- <7>[11085.897832] c0 max77686_get_voltage: id=29, val=1e
- <4>[11085.898180] c0 Mali: Mali frequency 266
- <4>[11085.943361] c0 Mali: gpu bottom lock release
- <4>[11085.944985] c2 Mali: gpu bottom lock release
- <6>[11085.980081] c3 [TSP] DVFS Off!Mali: gpu bottom lock release
- <4>[11086.297843] c1 Mali: gpu bottom lock release
- <4>[11086.410371] c1 Mali: Mali frequency 160
- <4>[11086.410395] c1 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11086.410995] c0 max77686: id=29, org=1e, val=1c
- <7>[11086.412548] c0 max77686_get_voltage: id=29, val=1c
- <7>[11086.677189] c2 [TouchKey] pressed:1
- <7>[11086.680397] c0 max77686_reg_enable: id=25, pattern=c0
- <7>[11086.681391] c0 [VIB] vibtonz_en is called
- <7>[11086.681412] c0 Motor:tspdrv: ImmVibeSPI_ForceOut_AmpEnable (1)
- <7>[11086.681488] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11086.686527] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11086.691533] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11086.696549] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11086.701610] c0 [VIB] vibtonz_pwm is called(-66)
- <7>[11086.706555] c0 [VIB] vibtonz_pwm is called(-66)
- <6>[11086.711052] c0 t0_set_ext_main_mic: main_mic bias on = 1
- <7>[11086.711542] c0 [VIB] vibtonz_pwm is called(0)
- <7>[11086.711570] c0 max77686_reg_disable: id=25, pattern=c0
- <7>[11086.713743] c0 [VIB] vibtonz_en is called
- <7>[11086.713765] c0 Motor:tspdrv: ImmVibeSPI_ForceOut_AmpDisable (0)
- <7>[11086.756822] c2 [TouchKey] pressed:0
- <6>[11086.815086] c0 wm8994-codec wm8994-codec: main_mic_bias_mod=0: status=1
- <6>[11086.818407] c0 wm8994-codec wm8994-codec: t0_wm1811_aif1_hw_params ++
- <6>[11086.818447] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++
- <6>[11086.818482] c0 wm8994-codec wm8994-codec: t0_wm1811_aif1_hw_params --
- <6>[11086.818570] c0 G:C:DmaAddr=@6af40000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffda0000
- <4>[11086.857893] c3 Mali: = regulator_set_voltage: 975000, 975000
- <7>[11086.858532] c3 max77686: id=29, org=1c, val=1e
- <7>[11086.861487] c0 max77686_get_voltage: id=29, val=1e
- <4>[11086.861903] c0 Mali: Mali frequency 266
- <6>[11086.908583] c0 t0_set_ext_main_mic: main_mic bias on = 0
- <6>[11086.908617] c0 wm8994-codec wm8994-codec: main_mic_bias_mod=0: status=0
- <6>[11087.191549] c3 mdm_modem_ioctl: Powering on mdm
- <6>[11087.191587] c3 request_boot_lock_set
- <3>[11087.191618] c3 mdm_do_soft_power_on: soft resetting mdm modem
- <6>[11087.191653] c3 mdm_peripheral_disconnect
- <6>[11087.191778] c3 s5p-ohci s5p-ohci: remove, state 4
- <7>[11087.191828] c3 s5p-ohci s5p-ohci: roothub graceful disconnect
- <6>[11087.191893] c3 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xac/0x160
- <6>[11087.191946] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11087.191984] c3 usb usb1: unregistering device
- <7>[11087.192013] c3 usb usb1: unregistering interface 1-0:1.0
- <7>[11087.192658] c3 usb usb1: usb_disable_device nuking all URBs
- <7>[11087.205717] c3 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11087.205750] c3 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11087.205788] c3 s5p-ohci s5p-ohci: control 0x4c3 RWE HCFS=suspend CBSR=3
- <7>[11087.205826] c3 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11087.205858] c3 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11087.205889] c3 s5p-ohci s5p-ohci: intrenable 0x0000005a RHSC UE RD WDH
- <7>[11087.205923] c3 s5p-ohci s5p-ohci: hcca frame #03fd
- <7>[11087.205949] c3 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11087.205982] c3 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11087.206013] c3 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11087.206043] c3 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11087.206076] c3 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11087.206108] c3 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <6>[11087.206193] c3 s5p-ohci s5p-ohci: USB bus 1 deregistered
- <6>[11087.235454] c3 s5p-ohci s5p-ohci: still being used(18)
- <7>[11087.250708] c0 max77686: id=27, org=39, val=32
- <6>[11087.270043] c3 mdm_peripheral_connect
- <6>[11087.270567] c3 set hsic lpa phy init
- <6>[11087.270596] c3 s5p-ehci s5p-ehci: usb phy usage(18)
- <3>[11087.270623] c3 s5p-ehci s5p-ehci: Already power on PHY
- <7>[11087.270650] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11087.270693] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <7>[11087.270726] c3 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000
- <7>[11087.270759] c3 s5p-ehci s5p-ehci: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
- <7>[11087.270802] c3 s5p-ehci s5p-ehci: reset hcc_params 2a016 thresh 1 uframes 256/512/1024 park LPM
- <6>[11087.270845] c3 s5p-ehci s5p-ehci: S5P EHCI Host Controller
- <7>[11087.270939] c3 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11087.271038] c3 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11087.271083] c3 drivers/usb/core/inode.c: creating file '001'
- <6>[11087.271478] c3 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- <7>[11087.271603] c3 s5p-ehci s5p-ehci: park 0
- <7>[11087.271626] c3 s5p-ehci s5p-ehci: support lpm
- <6>[11087.271665] c3 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
- <7>[11087.271699] c3 s5p-ehci s5p-ehci: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
- <7>[11087.300691] c0 max77686: id=27, org=32, val=39Mali: Mali frequency 160
- <4>[11087.310421] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11087.311036] c0 max77686: id=29, org=1e, val=1c
- <7>[11087.312631] c0 max77686_get_voltage: id=29, val=1c
- <4>[11087.357590] c0 Mali: gpu bottom lock release
- <4>[11087.358856] c0 Mali: = regulator_set_voltage: 975000, 975000
- <7>[11087.359471] c0 max77686: id=29, org=1c, val=1e
- <7>[11087.361028] c0 max77686_get_voltage: id=29, val=1e
- <4>[11087.361369] c0 Mali: Mali frequency 266
- <3>[11087.603445] c3 s5p-ehci s5p-ehci: startup error -110
- <6>[11087.603483] c3 s5p-ehci s5p-ehci: USB bus 1 deregistered
- <3>[11087.660728] c3 s5p-ehci s5p-ehci: Failed to add USB HCD
- <4>[11087.660780] c3 s5p-ehci: probe of s5p-ehci failed with error -110
- <6>[11087.661299] c3 s5p-ohci s5p-ohci: usb phy usage(22)
- <3>[11087.661323] c3 s5p-ohci s5p-ohci: Already power on PHY
- <7>[11087.661347] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11087.661386] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <6>[11087.661416] c3 s5p-ohci s5p-ohci: s5p OHCI
- <7>[11087.661502] c3 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11087.661580] c3 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11087.661620] c3 drivers/usb/core/inode.c: creating file '001'
- <6>[11087.662059] c3 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 1
- <7>[11087.662100] c3 s5p-ohci s5p-ohci: ohci_s5p_init, ohci:d4d7ed08
- <7>[11087.662192] c3 s5p-ohci s5p-ohci: created debug files
- <6>[11087.662232] c3 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
- <7>[11087.662261] c3 s5p-ohci s5p-ohci: ohci_s5p_start, ohci:d4d7ed08Mali: gpu bottom lock release
- <7>[11087.719042] c3 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11087.719071] c3 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11087.719101] c3 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3
- <7>[11087.719130] c3 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11087.719155] c3 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11087.719180] c3 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
- <7>[11087.719213] c3 s5p-ohci s5p-ohci: hcca frame #0005
- <7>[11087.719237] c3 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11087.719267] c3 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11087.719295] c3 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11087.719322] c3 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11087.719351] c3 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11087.719380] c3 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <7>[11087.719439] c3 usb usb1: default language 0x0409
- <7>[11087.719470] c3 usb usb1: udev 1, busnum 1, minor = 0
- <6>[11087.719494] c3 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- <6>[11087.719539] c3 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[11087.719570] c3 usb usb1: Product: s5p OHCI
- <6>[11087.719589] c3 usb usb1: Manufacturer: Linux 3.0.31-1665483 ohci_hcd
- <6>[11087.719616] c3 usb usb1: SerialNumber: s5p-ohci
- <6>[11087.719636] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11087.721590] c3 usb usb1: usb_probe_device
- <7>[11087.721620] c3 usb usb1: configuration #1 chosen from 1 choice
- <7>[11087.721669] c3 usb usb1: adding 1-0:1.0 (config #1, interface 0)
- <7>[11087.722127] c3 hub 1-0:1.0: usb_probe_interface
- <7>[11087.722155] c3 hub 1-0:1.0: usb_probe_interface - got id
- <6>[11087.722185] c3 hub 1-0:1.0: USB hub found
- <6>[11087.722218] c3 hub 1-0:1.0: 3 ports detected
- <7>[11087.722243] c3 hub 1-0:1.0: standalone hub
- <7>[11087.722267] c3 hub 1-0:1.0: no power switching (usb 1.0)
- <7>[11087.722293] c3 hub 1-0:1.0: global over-current protection
- <7>[11087.722323] c3 hub 1-0:1.0: power on to power good time: 4ms
- <7>[11087.722359] c3 hub 1-0:1.0: local power source is good
- <7>[11087.722384] c3 hub 1-0:1.0: no over-current condition exists
- <7>[11087.722410] c3 hub 1-0:1.0: trying to enable port power on non-switchable hub
- <7>[11087.722704] c3 drivers/usb/core/inode.c: creating file '001'
- <5>[11087.785754] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11087.785800] c3 [TSP] DVFS On![8]Mali: Mali frequency 160
- <4>[11087.810442] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11087.811053] c0 max77686: id=29, org=1e, val=1c
- <7>[11087.812619] c0 max77686_get_voltage: id=29, val=1c
- <7>[11087.820083] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <5>[11087.833246] c3 melfas-ts 3-0048: R(M)(60) [ 0]Mali: = regulator_set_voltage: 975000, 975000
- <7>[11087.847430] c0 max77686: id=29, org=1c, val=1e
- <7>[11087.848995] c0 max77686_get_voltage: id=29, val=1e
- <4>[11087.849336] c0 Mali: Mali frequency 266
- <6>[11087.930067] c3 [TSP] DVFS Off!Mali: Mali frequency 160
- <4>[11088.360400] c0 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11088.361008] c0 max77686: id=29, org=1e, val=1c
- <7>[11088.362580] c0 max77686_get_voltage: id=29, val=1c
- <7>[11088.421125] c2 [TouchKey] pressed:1
- <7>[11088.424204] c0 max77686_reg_enable: id=25, pattern=c0
- <7>[11088.425198] c0 [VIB] vibtonz_en is called
- <7>[11088.425219] c0 Motor:tspdrv: ImmVibeSPI_ForceOut_AmpEnable (1)
- <7>[11088.425303] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11088.430340] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11088.435340] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11088.440344] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11088.445364] c0 [VIB] vibtonz_pwm is called(-66)
- <7>[11088.450351] c0 [VIB] vibtonz_pwm is called(-66)
- <7>[11088.455353] c0 [VIB] vibtonz_pwm is called(0)
- <7>[11088.455382] c0 max77686_reg_disable: id=25, pattern=c0
- <7>[11088.457594] c0 [VIB] vibtonz_en is called
- <7>[11088.457615] c0 Motor:tspdrv: ImmVibeSPI_ForceOut_AmpDisable (0)
- <4>[11088.460060] c0 Mali: = regulator_set_voltage: 975000, 975000
- <7>[11088.460678] c0 max77686: id=29, org=1c, val=1e
- <7>[11088.462250] c0 max77686_get_voltage: id=29, val=1e
- <4>[11088.462588] c0 Mali: Mali frequency 266
- <7>[11088.484765] c2 [TouchKey] pressed:0
- <4>[11088.519754] c1 Mali: gpu bottom lock release
- <7>[11088.650883] c0 max77686: id=27, org=39, val=35
- <7>[11088.750038] c3 s5p-ohci s5p-ohci: auto-stop root hub
- <7>[11088.800683] c0 max77686: id=27, org=35, val=32Mali: gpu bottom lock release
- <7>[11089.960039] c3 hub 1-0:1.0: hub_suspend
- <7>[11089.960071] c3 usb usb1: bus auto-suspend
- <7>[11089.960093] c3 s5p-ohci s5p-ohci: suspend root hub
- <7>[11090.097456] c2 [TouchKey] pressed:1
- <7>[11090.100543] c0 max77686_reg_enable: id=25, pattern=c0
- <7>[11090.101549] c0 [VIB] vibtonz_en is called
- <7>[11090.101570] c0 Motor:tspdrv: ImmVibeSPI_ForceOut_AmpEnable (1)
- <7>[11090.101643] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11090.106683] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11090.111662] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11090.116660] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11090.116891] c2 [TouchKey] pressed:0
- <7>[11090.121701] c0 [VIB] vibtonz_pwm is called(-66)
- <7>[11090.126680] c0 [VIB] vibtonz_pwm is called(-66)
- <4>[11090.127351] c2 Mali: Mali frequency 266
- <7>[11090.131700] c0 [VIB] vibtonz_pwm is called(0)
- <7>[11090.131728] c0 max77686_reg_disable: id=25, pattern=c0
- <7>[11090.133917] c0 [VIB] vibtonz_en is called
- <7>[11090.133944] c0 Motor:tspdrv: ImmVibeSPI_ForceOut_AmpDisable (0)
- <7>[11090.179138] c0 i2s_txctrl: Turn Off - spr is no active
- <6>[11090.179868] c0 audss_reg_save: SRC[0x1], DIV[0xf13], GATE[0x42]
- <6>[11090.179899] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf13], GATE[0x42]
- <7>[11090.200659] c0 max77686: id=27, org=32, val=39
- <7>[11090.600797] c0 max77686: id=27, org=39, val=32
- <7>[11090.820893] c2 [TouchKey] pressed:1
- <7>[11090.824057] c0 max77686_reg_enable: id=25, pattern=c0
- <7>[11090.825055] c0 [VIB] vibtonz_en is called
- <7>[11090.825075] c0 Motor:tspdrv: ImmVibeSPI_ForceOut_AmpEnable (1)
- <7>[11090.825150] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11090.830227] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11090.835210] c0 [VIB] vibtonz_pwm is called(65)
- <4>[11090.835515] c2 Mali: Mali frequency 160
- <4>[11090.835545] c2 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11090.836176] c0 max77686: id=29, org=1e, val=1c
- <7>[11090.837805] c0 max77686_get_voltage: id=29, val=1c
- <7>[11090.838831] c2 [TouchKey] pressed:0
- <7>[11090.840189] c0 [VIB] vibtonz_pwm is called(65)
- <7>[11090.845236] c0 [VIB] vibtonz_pwm is called(-66)
- <4>[11090.846154] c3 Mali: gpu bottom lock release
- <4>[11090.847875] c3 Mali: = regulator_set_voltage: 975000, 975000
- <7>[11090.848548] c0 max77686: id=29, org=1c, val=1e
- <7>[11090.850199] c0 [VIB] vibtonz_pwm is called(-66)
- <7>[11090.851190] c2 max77686_get_voltage: id=29, val=1e
- <4>[11090.851584] c2 Mali: Mali frequency 266
- <7>[11090.855201] c0 [VIB] vibtonz_pwm is called(0)
- <7>[11090.855235] c0 max77686_reg_disable: id=25, pattern=c0
- <7>[11090.857408] c0 [VIB] vibtonz_en is called
- <7>[11090.857434] c0 Motor:tspdrv: ImmVibeSPI_ForceOut_AmpDisable (0)
- <7>[11090.950765] c0 max77686: id=27, org=32, val=39
- <7>[11091.000728] c0 max77686: id=27, org=39, val=32Mali: gpu bottom lock release
- <4>[11091.335374] c2 Mali: Mali frequency 160
- <4>[11091.335398] c2 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11091.336004] c0 max77686: id=29, org=1e, val=1c
- <7>[11091.337608] c0 max77686_get_voltage: id=29, val=1c
- <5>[11091.998781] c3 melfas-ts 3-0048: P(M)(60) [ 0]
- <6>[11091.998819] c3 [TSP] DVFS On![8]
- <7>[11092.003054] c0 max77686: id=27, org=32, val=35
- <5>[11092.021894] c3 melfas-ts 3-0048: R(M)(60) [ 0]Mali: = regulator_set_voltage: 975000, 975000
- <6>[11092.120062] c3 [TSP] DVFS Off!
- <7>[11092.120662] c0 max77686: id=29, org=1c, val=1e
- <7>[11092.122239] c0 max77686_get_voltage: id=29, val=1e
- <4>[11092.122593] c0 Mali: Mali frequency 266
- <4>[11092.620353] c2 Mali: Mali frequency 160
- <4>[11092.620375] c2 Mali: = regulator_set_voltage: 950000, 950000
- <7>[11092.620977] c0 max77686: id=29, org=1e, val=1c
- <7>[11092.622534] c0 max77686_get_voltage: id=29, val=1c
- <6>[11092.926422] c3 mdm_modem_ioctl: Powering on mdm
- <6>[11092.926445] c3 request_boot_lock_set
- <3>[11092.926466] c3 mdm_do_soft_power_on: soft resetting mdm modem
- <6>[11092.926491] c3 mdm_peripheral_disconnect
- <6>[11092.926572] c3 s5p-ohci s5p-ohci: remove, state 4
- <7>[11092.926606] c3 s5p-ohci s5p-ohci: roothub graceful disconnect
- <6>[11092.926645] c3 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xac/0x160
- <6>[11092.926679] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11092.926707] c3 usb usb1: unregistering device
- <7>[11092.926728] c3 usb usb1: unregistering interface 1-0:1.0
- <7>[11092.927081] c3 usb usb1: usb_disable_device nuking all URBs
- <7>[11092.995485] c3 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11092.995515] c3 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11092.995548] c3 s5p-ohci s5p-ohci: control 0x4c3 RWE HCFS=suspend CBSR=3
- <7>[11092.995581] c3 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11092.995610] c3 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11092.995639] c3 s5p-ohci s5p-ohci: intrenable 0x0000005a RHSC UE RD WDH
- <7>[11092.995673] c3 s5p-ohci s5p-ohci: hcca frame #040c
- <7>[11092.995699] c3 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11092.995731] c3 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11092.995762] c3 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11092.995792] c3 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11092.995823] c3 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11092.995854] c3 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <6>[11092.995934] c3 s5p-ohci s5p-ohci: USB bus 1 deregistered
- <6>[11093.025379] c2 s5p-ohci s5p-ohci: still being used(18)
- <6>[11093.040044] c0 [SSP]: debug_work_func(61) - Sensor state: 0xef, RC: 0, MS: 0
- <6>[11093.040076] c0 0 : 1, -12, 1100 (200ms)
- <6>[11093.040095] c0 6 : 404, 399, 239, 304 (200ms)
- <7>[11093.050717] c0 max77686: id=27, org=35, val=32
- <6>[11093.060026] c2 mdm_peripheral_connect
- <6>[11093.060377] c2 set hsic lpa phy init
- <6>[11093.060400] c2 s5p-ehci s5p-ehci: usb phy usage(18)
- <3>[11093.060424] c2 s5p-ehci s5p-ehci: Already power on PHY
- <7>[11093.060450] c2 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11093.060491] c2 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <7>[11093.060523] c2 s5p-ehci s5p-ehci: s5p_ehci_phy_init : 0x3c00000
- <7>[11093.060554] c2 s5p-ehci s5p-ehci: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
- <7>[11093.060594] c2 s5p-ehci s5p-ehci: reset hcc_params 2a016 thresh 1 uframes 256/512/1024 park LPM
- <6>[11093.060637] c2 s5p-ehci s5p-ehci: S5P EHCI Host Controller
- <7>[11093.060722] c2 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11093.060788] c2 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11093.060830] c2 drivers/usb/core/inode.c: creating file '001'
- <6>[11093.061137] c2 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- <7>[11093.061257] c2 s5p-ehci s5p-ehci: park 0
- <7>[11093.061279] c2 s5p-ehci s5p-ehci: support lpm
- <6>[11093.061314] c2 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
- <7>[11093.061346] c2 s5p-ehci s5p-ehci: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
- <7>[11093.205653] c0 max77686: id=27, org=32, val=39
- <3>[11093.390592] c2 s5p-ehci s5p-ehci: startup error -110
- <6>[11093.390621] c2 s5p-ehci s5p-ehci: USB bus 1 deregistered
- <3>[11093.440472] c1 s5p-ehci s5p-ehci: Failed to add USB HCD
- <4>[11093.440515] c1 s5p-ehci: probe of s5p-ehci failed with error -110
- <6>[11093.440851] c2 s5p-ohci s5p-ohci: usb phy usage(22)
- <3>[11093.440874] c2 s5p-ohci s5p-ohci: Already power on PHY
- <7>[11093.440899] c2 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1
- <7>[11093.440937] c2 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3
- <6>[11093.440964] c2 s5p-ohci s5p-ohci: s5p OHCI
- <7>[11093.441028] c2 SELinux: initialized (dev usbfs, type usbfs), uses transition SIDs
- <7>[11093.441075] c2 drivers/usb/core/inode.c: creating file 'devices'
- <7>[11093.441111] c2 drivers/usb/core/inode.c: creating file '001'
- <6>[11093.441368] c2 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 1
- <7>[11093.441408] c2 s5p-ohci s5p-ohci: ohci_s5p_init, ohci:d2309d08
- <7>[11093.441483] c2 s5p-ohci s5p-ohci: created debug files
- <6>[11093.441519] c2 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
- <7>[11093.441543] c2 s5p-ohci s5p-ohci: ohci_s5p_start, ohci:d2309d08
- <7>[11093.499016] c2 s5p-ohci s5p-ohci: OHCI controller state
- <7>[11093.499042] c2 s5p-ohci s5p-ohci: OHCI 1.0, NO legacy support registers
- <7>[11093.499073] c2 s5p-ohci s5p-ohci: control 0x083 HCFS=operational CBSR=3
- <7>[11093.499102] c2 s5p-ohci s5p-ohci: cmdstatus 0x00000 SOC=0
- <7>[11093.499127] c2 s5p-ohci s5p-ohci: intrstatus 0x00000004 SF
- <7>[11093.499153] c2 s5p-ohci s5p-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
- <7>[11093.499184] c2 s5p-ohci s5p-ohci: hcca frame #0005
- <7>[11093.499207] c2 s5p-ohci s5p-ohci: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
- <7>[11093.499236] c2 s5p-ohci s5p-ohci: roothub.b 00000000 PPCM=0000 DR=0000
- <7>[11093.499264] c2 s5p-ohci s5p-ohci: roothub.status 00008000 DRWE
- <7>[11093.499291] c2 s5p-ohci s5p-ohci: roothub.portstatus [0] 0x00000100 PPS
- <7>[11093.499320] c2 s5p-ohci s5p-ohci: roothub.portstatus [1] 0x00000100 PPS
- <7>[11093.499350] c2 s5p-ohci s5p-ohci: roothub.portstatus [2] 0x00000100 PPS
- <7>[11093.499402] c2 usb usb1: default language 0x0409
- <7>[11093.499432] c2 usb usb1: udev 1, busnum 1, minor = 0
- <6>[11093.499455] c2 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- <6>[11093.499485] c2 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[11093.499516] c2 usb usb1: Product: s5p OHCI
- <6>[11093.499534] c2 usb usb1: Manufacturer: Linux 3.0.31-1665483 ohci_hcd
- <6>[11093.499561] c2 usb usb1: SerialNumber: s5p-ohci
- <6>[11093.499581] c2 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.
- <7>[11093.500914] c2 usb usb1: usb_probe_device
- <7>[11093.500946] c2 usb usb1: configuration #1 chosen from 1 choice
- <7>[11093.500998] c2 usb usb1: adding 1-0:1.0 (config #1, interface 0)
- <7>[11093.501809] c2 hub 1-0:1.0: usb_probe_interface
- <7>[11093.501832] c2 hub 1-0:1.0: usb_probe_interface - got id
- <6>[11093.501857] c2 hub 1-0:1.0: USB hub found
- <6>[11093.501888] c2 hub 1-0:1.0: 3 ports detected
- <7>[11093.501907] c2 hub 1-0:1.0: standalone hub
- <7>[11093.501925] c2 hub 1-0:1.0: no power switching (usb 1.0)
- <7>[11093.501948] c2 hub 1-0:1.0: global over-current protection
- <7>[11093.501971] c2 hub 1-0:1.0: power on to power good time: 4ms
- <7>[11093.502001] c2 hub 1-0:1.0: local power source is good
- <7>[11093.502023] c2 hub 1-0:1.0: no over-current condition exists
- <7>[11093.502049] c2 hub 1-0:1.0: trying to enable port power on non-switchable hub
- <7>[11093.502442] c2 drivers/usb/core/inode.c: creating file '001'
- <7>[11093.505713] c0 max77686: id=27, org=39, val=32
- <7>[11093.600081] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
- <4>[11093.681937] c0 !@Sync 369
- <7>[11094.500032] c2 s5p-ohci s5p-ohci: auto-stop root hub
- <6>[11095.700047] c1 mdm_subsys_powerup: mdm modem restart timed out.
- <0>[11095.700081] c1 Kernel panic - not syncing: subsystem_restart_wq_func[d65b7b40]: Failed to powerup external_modem!
- <4>[11095.700123] c1 Backtrace:
- <4>[11095.700153] c1 [<c004cb58>] (dump_backtrace+0x0/0x10c) from [<c06560a4>] (dump_stack+0x18/0x1c)
- <4>[11095.700190] c1 r7:ea666840 r6:c0ae38a4 r5:c0aeb090 r4:c0b99a80
- <4>[11095.700225] c1 [<c065608c>] (dump_stack+0x0/0x1c) from [<c0656124>] (panic+0x7c/0x1b0)
- <4>[11095.700267] c1 [<c06560a8>] (panic+0x0/0x1b0) from [<c006a268>] (subsystem_restart_wq_func+0x214/0x250)
- <4>[11095.700305] c1 r3:c0933d30 r2:d65b7b40 r1:c065d780 r0:c0934630
- <4>[11095.700345] c1 [<c006a054>] (subsystem_restart_wq_func+0x0/0x250) from [<c00a499c>] (process_one_work+0x144/0x498)
- <4>[11095.700393] c1 [<c00a4858>] (process_one_work+0x0/0x498) from [<c00a5078>] (worker_thread+0x184/0x3e0)
- <4>[11095.700437] c1 [<c00a4ef4>] (worker_thread+0x0/0x3e0) from [<c00ab7f4>] (kthread+0x90/0x98)
- <4>[11095.700477] c1 [<c00ab764>] (kthread+0x0/0x98) from [<c008f204>] (do_exit+0x0/0x768)
- <4>[11095.700510] c1 r7:00000013 r6:c008f204 r5:c00ab764 r4:dbd6feb0
- <2>[11095.700575] c0 CPU0: stopping
- <4>[11095.700590] c0 Backtrace:
- <4>[11095.700613] c0 [<c004cb58>] (dump_backtrace+0x0/0x10c) from [<c06560a4>] (dump_stack+0x18/0x1c)
- <4>[11095.700649] c0 r7:00000004 r6:00000006 r5:c09f4000 r4:00000000
- <4>[11095.700688] c0 [<c065608c>] (dump_stack+0x0/0x1c) from [<c00424c0>] (do_IPI+0x244/0x29c)
- <4>[11095.700727] c0 [<c004227c>] (do_IPI+0x0/0x29c) from [<c0048700>] (__irq_svc+0x80/0x15c)
- <4>[11095.700762] c0 Exception stack(0xc09f5ee0 to 0xc09f5f28)
- <4>[11095.700789] c0 5ee0: 211dcb1b 00000000 547c7a53 000197b4 c0b970a4 00000000 c31720a8 c0aceafc
- <4>[11095.700827] c0 5f00: c31720b8 c0c736f0 00000000 c09f5f54 547c7a53 c09f5f28 c00b6dd8 c005ae34
- <4>[11095.700863] c0 5f20: 800f0013 ffffffff
- <4>[11095.700890] c0 [<c005adf8>] (exynos4_enter_idle+0x0/0x170) from [<c0450658>] (cpuidle_idle_call+0xd8/0x30c)
- <4>[11095.700930] c0 r7:c0aceafc r6:c31720a8 r5:c09f4000 r4:c31720a8
- <4>[11095.700966] c0 [<c0450580>] (cpuidle_idle_call+0x0/0x30c) from [<c0049c48>] (cpu_idle+0xc4/0x104)
- <4>[11095.701011] c0 [<c0049b84>] (cpu_idle+0x0/0x104) from [<c06479d0>] (rest_init+0xa0/0xa4)
- <4>[11095.701045] c0 r7:00000000 r6:c003b264 r5:00000000 r4:c09f4000
- <4>[11095.701081] c0 [<c0647930>] (rest_init+0x0/0xa4) from [<c00089dc>] (start_kernel+0x2b4/0x308)
- <4>[11095.701117] c0 r5:00000000 r4:c0ac6e88
- <4>[11095.701141] c0 [<c0008728>] (start_kernel+0x0/0x308) from [<40008040>] (0x40008040)
- <2>[11095.701175] c2 CPU2: stopping
- <4>[11095.701191] c2 Backtrace:
- <4>[11095.701215] c2 [<c004cb58>] (dump_backtrace+0x0/0x10c) from [<c06560a4>] (dump_stack+0x18/0x1c)
- <4>[11095.701252] c2 r7:00000004 r6:00000006 r5:eb476000 r4:00000002
- <4>[11095.701289] c2 [<c065608c>] (dump_stack+0x0/0x1c) from [<c00424c0>] (do_IPI+0x244/0x29c)
- <4>[11095.701328] c2 [<c004227c>] (do_IPI+0x0/0x29c) from [<c0048700>] (__irq_svc+0x80/0x15c)
- <4>[11095.701362] c2 Exception stack(0xeb477f10 to 0xeb477f58)
- <4>[11095.701387] c2 7f00: 815f545e 00000000 547c7a53 000197b4
- <4>[11095.701426] c2 7f20: c0b970a4 00000000 c31820a8 c0aceafc c31820b8 c0c736f0 00000002 eb477f84
- <4>[11095.701464] c2 7f40: 547c7a53 eb477f58 c00b6dd8 c005ae34 800f0013 ffffffff
- <4>[11095.701500] c2 [<c005adf8>] (exynos4_enter_idle+0x0/0x170) from [<c0450658>] (cpuidle_idle_call+0xd8/0x30c)
- <4>[11095.701540] c2 r7:c0aceafc r6:c31820a8 r5:eb476000 r4:c31820a8
- <4>[11095.701576] c2 [<c0450580>] (cpuidle_idle_call+0x0/0x30c) from [<c0049c48>] (cpu_idle+0xc4/0x104)
- <4>[11095.701617] c2 [<c0049b84>] (cpu_idle+0x0/0x104) from [<c065300c>] (secondary_start_kernel+0x128/0x144)
- <4>[11095.701656] c2 r7:c0b96b14 r6:10c0387d r5:00000002 r4:c0af0c84
- <4>[11095.701690] c2 [<c0652ee4>] (secondary_start_kernel+0x0/0x144) from [<40652bd4>] (0x40652bd4)
- <4>[11095.701726] c2 r5:00000015 r4:65be806a
- <2>[11095.701747] c3 CPU3: stopping
- <4>[11095.701763] c3 Backtrace:
- <4>[11095.701788] c3 [<c004cb58>] (dump_backtrace+0x0/0x10c) from [<c06560a4>] (dump_stack+0x18/0x1c)
- <4>[11095.701824] c3 r7:00000004 r6:00000006 r5:eb49e000 r4:00000003
- <4>[11095.701862] c3 [<c065608c>] (dump_stack+0x0/0x1c) from [<c00424c0>] (do_IPI+0x244/0x29c)
- <4>[11095.701900] c3 [<c004227c>] (do_IPI+0x0/0x29c) from [<c0048700>] (__irq_svc+0x80/0x15c)
- <4>[11095.701934] c3 Exception stack(0xeb49ff10 to 0xeb49ff58)
- <4>[11095.701960] c3 ff00: d13e8fce 00000000 547c7a53 000197b4
- <4>[11095.701999] c3 ff20: c0b970a4 00000000 c318a0a8 c0aceafc c318a0b8 c0c736f0 00000003 eb49ff84
- <4>[11095.702036] c3 ff40: 547c7a53 eb49ff58 c00b6dd8 c005ae34 800f0013 ffffffff
- <4>[11095.702073] c3 [<c005adf8>] (exynos4_enter_idle+0x0/0x170) from [<c0450658>] (cpuidle_idle_call+0xd8/0x30c)
- <4>[11095.702113] c3 r7:c0aceafc r6:c318a0a8 r5:eb49e000 r4:c318a0a8
- <4>[11095.702149] c3 [<c0450580>] (cpuidle_idle_call+0x0/0x30c) from [<c0049c48>] (cpu_idle+0xc4/0x104)
- <4>[11095.702191] c3 [<c0049b84>] (cpu_idle+0x0/0x104) from [<c065300c>] (secondary_start_kernel+0x128/0x144)
- <4>[11095.702229] c3 r7:c0b96b14 r6:10c0387d r5:00000003 r4:c0af0c84
- <4>[11095.702264] c3 [<c0652ee4>] (secondary_start_kernel+0x0/0x144) from [<40652bd4>] (0x40652bd4)
- <4>[11095.702300] c3 r5:00000015 r4:57fcc06a
- <6>[11095.802071] c1 notifier_call_chain : NOTIFY BAD sec_debug_panic_handler
- <0>[11095.802102] c1 Rebooting in 1 seconds..
- <0>[11096.799086] c1 sec_reboot (104, emergency)
- Samsung S-Boot 4.0 for GT-N7105 (May 16 2014 - 14:44:47)
- EXYNOS4412(EVT 2.0) / 2044MB / 0MB / Rev 10 / N7105XXUFNE3 /(PKG_ID 0x702f058)
- BOOTLOADER VERSION : N7105XXUFNE3
- PMIC rev = PASS2(4)
- BUCK1OUT(vdd_mif) = 0x07
- BUCK3DVS1(vdd_int) = 0x28
- cardtype: 0x00000007
- SB_MMC_HS_52MHZ_1_8V_3V_IO
- mmc->card_caps: 0x00000311
- mmc->host_caps: 0x00000311
- [mmc] capacity = 30777344
- Current SBOOT version : VERSION_-+A2
- - read_bl1
- pit_check_signature (PIT) valid.
- initialize_ddi_data: usable! (18:0xc)
- [RPMB] emmc_rpmb_open:
- Get DATA success.
- [RPMB] emmc_rpmb_close:
- initialize_rpmb_data: usable! (GT-N7105:VERSION_-+A2)
- PARAM ENV VERSION: v1.0..
- set_charger_current: chg curr(3f), in curr(17)
- set_charger_state: buck(1), chg(1), reg(0x05)
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- set_auto_current: ta_state(0), curr(1800)
- init_fuelgauge: fuelgauge power ok
- init_fuelgauge: not POR status
- init_fuelgauge: is reset case, skip soc-cal.
- get_table_soc: vcell(4181) is caculated to t-soc(92.414)
- init_fuelgauge: start: vcell(4181), vfocv(4203), soc(91), table soc(92)
- init_fuelgauge: finish: vcell(4181), vfocv(4203), soc(91), table soc(92)
- init_microusb_ic: before MUIC: CDETCTRL:0x2d
- init_microusb_ic: after MUIC: CDETCTRL:0x2d
- init_microusb_ic: MUIC: CONTROL1:0x00
- init_microusb_ic: MUIC: CONTROL1:0x00
- init_microusb_ic: MUIC: CONTROL2:0x3e
- init_microusb_ic: MUIC: CONTROL2:0x3e
- PMIC_ID = 0x02
- PMIC_IRQSRC = 0x00
- PMIC_IRQ1 = 0x33
- PMIC_IRQ2 = 0x00
- PMIC_IRQ1M = 0xff
- PMIC_IRQ2M = 0xff
- PMIC_STATUS1 = 0x16
- PMIC_STATUS2 = 0x00
- PMIC_PWRON = 0x01
- PMIC_RTCINT = 0x11
- PMIC_RTCINTM = 0x3f
- s5p_check_keypad: 0x0
- s5p_check_reboot_mode: INFORM3 = 0 ... skip
- board_check_cp_mdm9x_type : 0
- s5p_check_upload: MAGIC(0x66262564), RST_STAT(0x20000000)
- s5p_check_upload: debug level is 4f4c!
- s5p_check_upload: level low or unknown: skip 0
- s5p_check_download: 0
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- check_pm_status: normal reset, do not enter LPM mode.
- ddi type = 0, MAGNA
- cmu_div:12, div:1, src_clk:880000000, pixel_clk:67425696
- s5p_dsim_display_config: VIDEO MODE
- 41, 16, 26,
- <start_checksum:448>CHECKSUM_HEADER_SECTOR :4096
- <start_checksum:450>offset:50, size:6296
- <start_checksum:454>CHECKSUM_HEADER_INFO : NeedChecksum:0 PartNo:20
- Not Need Movinand Checksum
- Movinand Checksum Confirmation Pass
- [mobi_drv] add: 0x43e51e90, size: 3933
- MobiCore INIT response = 0
- MobiCore RTM has initialized!
- MobiCore IDLE flag = 0
- MobiCore driver address 43e51e90, size = 3933
- MobiCore RTM Notified back!
- MobiCore Driver loaded and RTM IDLE!
- MobiCore RTM has been uninitialized!
- load_kernel: loading boot image from 106496..
- pit_check_signature (BOOT) valid.
- No need to update kernel type.
- SMC Num = 0x83000001
- mobismc success!!! [ret = 0]
- [s5p_check_sboot_version_rpmb]cur_version:VERSION_-+A2, rpmb_version:VERSION_-+A2
- rpmb_version:50, cur_version:50
- ATAG_CORE: 5 54410001 0 0 0
- ATAG_MEM: 4 54410002 20000000 40000000
- ATAG_MEM: 4 54410002 20000000 60000000
- ATAG_MEM: 4 54410002 20000000 80000000
- ATAG_MEM: 4 54410002 1FC00000 A0000000
- ATAG_SERIAL: 4 54410006 42f7f306 8ff29f23
- ATAG_INITRD2: 4 54420005 42000000 16a128
- ATAG_REVISION: 3 54410007 a
- ATAG_CMDLINE: a9 54410009 'console=ram loglevel=4 androidboot.baseband=mdm sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_tima_log=0x200000@0x46202000 sec_avc_log=0x40000@0x46404000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=0 consoleblank=0 lpj=3981312 vmalloc=176m oops=panic pmic_info=67 cordon=f7bbc52f79e8a13e312d409859e42604 connie=GT-N7105_LTE_OPE_333eb4febd769673c62d7b66d7b2a6c1 androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=N7105XXUFNE3 androidboot.selinux=enforcing androidboot.warranty_bit=1 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=42f7f3068ff29f23 snd_soc_core.pmdown_time=1000'
- ATAG_NONE: 0 0
- Starting kernel at 0x40008000...
- SWITCH_SEL(3)
Add Comment
Please, Sign In to add comment