Run-DMD fw 3.04

     Version history
      1.0   2014-11-29  Initial release
      1.0a  2014-11-30  SD-card initialization (fix for hanging at boot with LED1 constant lit)
      1.10  2014-12-13  Faster LED1 flashing when SD card problems, allocate memory are SD init
                        Improved clock intensity setting
                        Flickering in Clock setting menues fixed
                        Pixel error in small clock font digit "0" corrected
                        Pinball LED lower display flicker fixed
                        Pinball Plasma output fixed
                        Displays output DMD type during startup
      1.11  2014-12-21  Removed startup scroll animation
      1.11B 2014-12-23  RevA/B with TYSONLED HUB08
      1.11C 2014-12-22  RevC pcb support only
      1.11D 2014-12-25  RevC pcb with RG HUB08 (pin-power connector)
      1.20  2014-12-26  Support for multiple HUB08 DMD types, new DMD type selection function
                        Supports RevA-C PCBs
                        Improved DMD brightness setting (icon)
                        Improved clock show seconds setting (icon)
      1.21  2014-12-29  Dim display setting for Pinball plasma DMD fixed
                        Time setting +/- buttons positions swaped
                        Startup scroll animation enabled
      1.22  2015-01-01  Time setting jumps over 00 values, fixed
      1.23  2015-01-10  DMD select function, LED doubleblinks when loop completed/restarts
                        Added support for HUB08 D
      1.24  2015-01-15  Added support for HUB08 E
                        DMD select function, improved LED blink indication when loop completed/restarts
      1.25  2015-02-05  Increased sector 0 reads from 10 to 50 at boot
                        Displays number of animations on boot screen
                        Update time from RTC every minute instead of hourly
                        Debug mode shows animation ID/name
      1.26  2015-02-07  Settings option to hide boot scroll image
                        Adjusted DMD type names
                        Adjusted Plasma DMD level 3
                        Faster boot sequence
      1.27  2015-02-22  Update timer from RTC when clock not visible (during clock fade in/out)
                        Check 50 last animations to avoid repeating
      1.28  2015-02-23  Clock AM/PM format support
      2.00  2015-02-25  New menu system
                        New feature: Clock Delay - Set delay time between animations
                        New feature: Status LED - Option to turn off pcb LED at normal operation
                        New feature: Boot Mode - Fast boot option
                        New feature: Startup image - Set frequency of 128x72 scroll image display
      2.01  2015-02-26  "No animations" option in in "Clock Delay"
                        BTN4 sleep function
                        New option "Menu Style"
      2.10  2015-02-28  Selectable clock style (Pinball, Heavy Metal, Rock)
      2.11  2015-03-01  Fixed missing leading "0" in clock minues in "Clock Shade" setting
                        Addded support for multi colored clock styles ("Non Shade")
                        New clock style (Chrome, Sport, Comic, Space, Player)
                        Fixed black outline error in "M" (AM/PM) for clock font pinball
                        New feature: Clock Dots (Blinking/Steady On/Off)
      2.12   2015-03-04 Wake up timer fix for 5 and 15 min settings
                        New clock style "Monster"
      2.13   2015-03-05 Clock style "Monster" renamed to "Zombie"
                        Menu option Boot Mode "Quick & Quiet" renamed to "Express"
                        Faster SD-card initialization process, fixed initial "false" LED blinks
      2.14   2015-03-07 Improved SD-card initialization to make hard re-init after 10 soft fails.
                        Fixed Pinball LED DMD brightness setting issue
                        DMD brightness now in 3 levels (Low/Medium/High)
      2.15   2015-03-08 Renamed menu option "HIDE" to "DISABLE" in "STARTUP IMAGE"
                        New option: "Content Filter"
      2.16   2015-03-17 Fixed Plasma DMD issue with 4-bit (16 col) clock styles
      2.17   2015-03-18 Clock style "Comic" adjusted for more even digit spacing
                        Disabled setting "Clock Shade" when 4-bit clock style selected
      2.18   2015-03-21 New option: "Animation ID"
                        New option: "I/O Function"
                        Support for SD-cards with 0 animations
                        SD card info format at boot adjusted to <Animations> + <Card name>
                        Minor HUB08 type renaming
                        Fix: Clock Shade setting save said DMD Brightness in header
                        Medium DMD brightness during DMD detect cycle
      2.19  2015-03-28  Re-enter settings menu at the same item as it last was exited
      2.20  2015-03-11  Stern LED DMD (520-5052-05) ghosting issue fixed (Pinball LED mode)
                        Main menu button 4 renamed from "Edit" to "OK"
                        Prev/Next main menu buttons now repeats
			New feature: Diagnostics
      2.21  2015-04-01  No longer goes into sleep mode after setting DMD type
      2.22  2015-04-08  Stern LED DMD timing issue revisited and fixed also for 520-5052-15
      2.23  2015-04-14  Main menu scroll speed increased when using Pinball LED DMD
                        Increased random replay limit to 250
      2.30  2015-04-18  Replaced content filter "FAMILY" with "ONLY ENABLED" or "SHOW ALL"
                        New feaure: Animations (view, enable/disable individual animations)
                        Feature ANIMATION ID removed
                        Displays enabled/total SD-card animation at startup screen (vebose mode)
      2.31  2015-04-19  Fix: Reindexes active animations after changing animation filtering setting
                        DIAGNOSTICS menu changed to TOOLS
                        New options enable/disable all animations in tools menu
                        New clock style (DarthBoMan)
                        Prev/Next menu buttons now repeats within submenues
      2.32  2015-04-21  Fix: Clock dots no longer stops blinking while selecting next animation
                        Fix: Enabling/disabling animtions when using filtering "SHOW ALL" does no longer corrupt the enabled animations count
      2.33  2015-04-25  Fix: Pixel error clock style DARTBOMAN digits "8" and "9" lower right
                        Pinball Plasma DMD color levels mapping adjusted for better image dynamics
                        Fix: Clock dots freeze 500ms before loading an animation in Pinball Plasma DND mode fixed (Dim clock loop)
                        Limit SD-card SPI communication to 10Mbit to avoid overspeed read errors
      3.00  2015-04-28  Expansion board "EXP ONE" RevA support
      3.01  2015-05-10  System small font letter "X" adjusted
      3.02  2015-05-21  EXP ONE support: Ambient light for background and animations
      3.03  2015-05-23  Time format "12H WITH AM/PM" position centered by 50% of "AM/PM" text width
                        Clock style "DarthBoMan" brighter for better shadow contrast
      3.04  2015-05-27  EXP ONE support: 433Mhz RF self-learning power switches (Nexa, Bye Bye Standby, Chacon, CoCo Technologies, HomeEasy (UK), Intertechno, Kappa, KlikAanKlikUit, Nexa, Proove)
                        Displays expansion board detected and version as boot in verbose mode