API tools faq
paste
Advertisement
Guest User

BBxM USB error

a guest
Jan 3rd, 2012
90
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.51 KB | None | 0 0
raw download clone embed print report
  1. ubuntu@omap:~$ dmesg
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Linux version 3.1.6-x6 (root@panda-a1-1gb) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #1 SMP Thu Dec 22 11:17:51 UTC 2011
  5. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  6. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  7. [ 0.000000] Machine: OMAP3 Beagle Board
  8. [ 0.000000] Beagle expansionboard: none
  9. [ 0.000000] Beagle second expansionboard: none
  10. [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
  11. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  12. [ 0.000000] OMAP3630 ES1.1 (l2cache iva sgx neon isp 192mhz_clk )
  13. [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
  14. [ 0.000000] On node 0 totalpages: 126464
  15. [ 0.000000] free_area_init_node: node 0, pgdat c08976c0, node_mem_map c0960000
  16. [ 0.000000] Normal zone: 1024 pages used for memmap
  17. [ 0.000000] Normal zone: 0 pages reserved
  18. [ 0.000000] Normal zone: 125440 pages, LIFO batch:31
  19. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
  20. [ 0.000000] Reprogramming SDRC clock to 332000000 Hz
  21. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0d64000 s11584 r8192 d12992 u32768
  22. [ 0.000000] pcpu-alloc: s11584 r8192 d12992 u32768 alloc=8*4096
  23. [ 0.000000] pcpu-alloc: [0] 0
  24. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125440
  25. [ 0.000000] Kernel command line: console=ttyO2,115200n8 console=tty0 mpurate=auto buddy=none buddy2=none camera=none vram=12M omapfb.mode=dvi:1280x720MR-16@60 omapdss.def_disp=dvi roc
  26. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  27. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  28. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  29. [ 0.000000] allocated 2097152 bytes of page_cgroup
  30. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  31. [ 0.000000] Memory: 494MB = 494MB total
  32. [ 0.000000] Memory: 486636k/486636k available, 37652k reserved, 0K highmem
  33. [ 0.000000] Virtual kernel memory layout:
  34. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  35. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  36. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  37. [ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
  38. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  39. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  40. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  41. [ 0.000000] .text : 0xc0008000 - 0xc07d2940 (7979 kB)
  42. [ 0.000000] .init : 0xc07d3000 - 0xc082cd40 ( 360 kB)
  43. [ 0.000000] .data : 0xc082e000 - 0xc0899a68 ( 431 kB)
  44. [ 0.000000] .bss : 0xc0899a8c - 0xc095f7e4 ( 792 kB)
  45. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  46. [ 0.000000] Hierarchical RCU implementation.
  47. [ 0.000000] NR_IRQS:410 nr_irqs:410 410
  48. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  49. [ 0.000000] Total of 96 interrupts on 1 active controller
  50. [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
  51. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  52. [ 0.000000] Console: colour dummy device 80x30
  53. [ 0.000000] console [tty0] enabled
  54. [ 0.000762] Calibrating delay loop... 490.52 BogoMIPS (lpj=1916928)
  55. [ 0.032196] pid_max: default: 32768 minimum: 301
  56. [ 0.032562] Security Framework initialized
  57. [ 0.032653] AppArmor: AppArmor initialized
  58. [ 0.033020] Mount-cache hash table entries: 512
  59. [ 0.034240] Initializing cgroup subsys cpuacct
  60. [ 0.034332] Initializing cgroup subsys memory
  61. [ 0.034423] Initializing cgroup subsys devices
  62. [ 0.034454] Initializing cgroup subsys freezer
  63. [ 0.034484] Initializing cgroup subsys blkio
  64. [ 0.034545] Initializing cgroup subsys perf_event
  65. [ 0.034759] CPU: Testing write buffer coherency: ok
  66. [ 0.035186] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  67. [ 0.036499] Brought up 1 CPUs
  68. [ 0.036560] SMP: Total of 1 processors activated (490.52 BogoMIPS).
  69. [ 0.038299] devtmpfs: initialized
  70. [ 0.046264] print_constraints: dummy:
  71. [ 0.046844] NET: Registered protocol family 16
  72. [ 0.047180] GPMC revision 5.0
  73. [ 0.049346] omap_device: omap_gpio.0: new worst case activate latency 0: 30517
  74. [ 0.049713] OMAP GPIO hardware version 2.5
  75. [ 0.052581] omap_mux_init: Add partition: #1: core, flags: 0
  76. [ 0.053985] OMAP3 Beagle Rev: xM Ax/Bx
  77. [ 0.056976] omap_device: omap_uart.0: new worst case activate latency 0: 30517
  78. [ 0.057373] omap_device: omap_uart.0: new worst case deactivate latency 0: 30517
  79. [ 0.063537] Found NAND on CS0
  80. [ 0.063598] Registering NAND on CS0
  81. [ 0.064208] gpio_request: gpio--22 (DVI reset) status -22
  82. [ 0.064208] Unable to get DVI reset GPIO
  83. [ 0.064453] hw-breakpoint: debug architecture 0x4 unsupported.
  84. [ 0.068237] omap_device: omap-mcbsp.2: alias fck already exists
  85. [ 0.068634] omap_device: omap-mcbsp.3: alias fck already exists
  86. [ 0.070800] OMAP DMA hardware revision 5.0
  87. [ 0.083129] bio: create slab <bio-0> at 0
  88. [ 0.085540] SCSI subsystem initialized
  89. [ 0.086151] omap_device: omap2_mcspi.1: new worst case activate latency 0: 30517
  90. [ 0.087310] omap_device: omap2_mcspi.4: new worst case deactivate latency 0: 30517
  91. [ 0.088043] usbcore: registered new interface driver usbfs
  92. [ 0.088317] usbcore: registered new interface driver hub
  93. [ 0.088775] usbcore: registered new device driver usb
  94. [ 0.090301] omap_i2c omap_i2c.1: bus 1 rev4.0 at 2600 kHz
  95. [ 0.094390] twl4030: PIH (irq 7) chaining IRQs 368..375
  96. [ 0.094482] twl4030: power (irq 373) chaining IRQs 376..383
  97. [ 0.095367] twl4030: gpio (irq 368) chaining IRQs 384..401
  98. [ 0.095977] _omap_mux_init_gpio: Could not set gpio192
  99. [ 0.100555] print_constraints: VUSB1V5: 1500 mV normal standby
  100. [ 0.101379] print_constraints: VUSB1V8: 1800 mV normal standby
  101. [ 0.102172] print_constraints: VUSB3V1: 3100 mV normal standby
  102. [ 0.105682] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  103. [ 0.107391] print_constraints: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
  104. [ 0.108276] print_constraints: VDAC: 1800 mV normal standby
  105. [ 0.109100] print_constraints: VDVI: 1800 mV normal standby
  106. [ 0.110229] print_constraints: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
  107. [ 0.110626] omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517
  108. [ 0.110931] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
  109. [ 0.111541] omap_device: omap_i2c.3: new worst case activate latency 0: 30517
  110. [ 0.111724] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz
  111. [ 0.113403] Advanced Linux Sound Architecture Driver Version 1.0.24.
  112. [ 0.114471] NetLabel: Initializing
  113. [ 0.114532] NetLabel: domain hash size = 128
  114. [ 0.114562] NetLabel: protocols = UNLABELED CIPSOv4
  115. [ 0.114654] NetLabel: unlabeled traffic allowed by default
  116. [ 0.114746] Switching to clocksource 32k_counter
  117. [ 0.115844] Switched to NOHz mode on CPU #0
  118. [ 0.141204] AppArmor: AppArmor Filesystem Enabled
  119. [ 0.173492] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  120. [ 0.173736] omap_device: musb-omap2430.-1: new worst case activate latency 0: 30517
  121. [ 0.179473] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  122. [ 0.179504] musb-hdrc: MHDRC RTL version 1.800
  123. [ 0.179534] musb-hdrc: setup fifo_mode 5
  124. [ 0.179565] musb-hdrc: 28/31 max ep, 8192/16384 memory
  125. [ 0.180114] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
  126. [ 0.180755] NET: Registered protocol family 2
  127. [ 0.181304] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  128. [ 0.182769] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  129. [ 0.183197] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  130. [ 0.183563] TCP: Hash tables configured (established 16384 bind 16384)
  131. [ 0.183593] TCP reno registered
  132. [ 0.183654] UDP hash table entries: 256 (order: 1, 8192 bytes)
  133. [ 0.183685] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  134. [ 0.184326] NET: Registered protocol family 1
  135. [ 0.185852] RPC: Registered named UNIX socket transport module.
  136. [ 0.185913] RPC: Registered udp transport module.
  137. [ 0.185943] RPC: Registered tcp transport module.
  138. [ 0.185974] RPC: Registered tcp NFSv4.1 backchannel transport module.
  139. [ 0.186401] Trying to unpack rootfs image as initramfs...
  140. [ 0.619262] Freeing initrd memory: 3024K
  141. [ 0.619537] _regulator_get: etb supply vcore not found, using dummy regulator
  142. [ 0.620513] _regulator_get: etm supply vcore not found, using dummy regulator
  143. [ 0.621063] PMU: registered new PMU device of type 0
  144. [ 0.621246] omap_dsp_init: 600000 bytes @ 9ee00000
  145. [ 0.622619] audit: initializing netlink socket (disabled)
  146. [ 0.622894] type=2000 audit(0.640:1): initialized
  147. [ 0.855407] VFS: Disk quotas dquot_6.5.2
  148. [ 0.856262] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  149. [ 0.867370] fuse init (API version 7.17)
  150. [ 0.871582] Btrfs loaded
  151. [ 0.871704] msgmni has been set to 956
  152. [ 0.875427] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  153. [ 0.875518] io scheduler noop registered
  154. [ 0.875549] io scheduler deadline registered
  155. [ 0.875885] io scheduler cfq registered (default)
  156. [ 0.877044] omap_device: omapdss_dss.-1: new worst case activate latency 0: 30517
  157. [ 0.877136] OMAP DSS rev 2.0
  158. [ 0.877197] omap_device: omapdss_dss.-1: new worst case deactivate latency 0: 30517
  159. [ 0.882202] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  160. [ 0.885192] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  161. [ 0.885925] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  162. [ 0.886688] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  163. [ 1.759887] console [ttyO2] enabled
  164. [ 1.764404] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
  165. [ 1.788330] brd: module loaded
  166. [ 1.800140] loop: module loaded
  167. [ 1.806457] omap2-nand driver initializing
  168. [ 1.811340] No NAND device found.
  169. [ 1.815063] No NAND device found.
  170. [ 1.819061] OneNAND driver initializing
  171. [ 1.824493] usbcore: registered new interface driver cdc_ether
  172. [ 1.830932] usbcore: registered new interface driver rndis_host
  173. [ 1.837280] cdc_ncm: 04-Aug-2011
  174. [ 1.840850] usbcore: registered new interface driver cdc_ncm
  175. [ 1.847717] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  176. [ 1.854980] _regulator_get: ehci-omap.0 supply hsusb0 not found, using dummy regulator
  177. [ 1.863586] _regulator_get: ehci-omap.0 supply hsusb1 not found, using dummy regulator
  178. [ 3.880554] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  179. [ 3.887420] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
  180. [ 3.895507] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  181. [ 3.911895] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  182. [ 3.918121] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  183. [ 3.925384] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  184. [ 3.933044] usb usb1: Product: OMAP-EHCI Host Controller
  185. [ 3.938690] usb usb1: Manufacturer: Linux 3.1.6-x6 ehci_hcd
  186. [ 3.944610] usb usb1: SerialNumber: ehci-omap.0
  187. [ 3.950744] hub 1-0:1.0: USB hub found
  188. [ 3.954895] hub 1-0:1.0: 3 ports detected
  189. [ 3.990173] Initializing USB Mass Storage driver...
  190. [ 3.995605] usbcore: registered new interface driver usb-storage
  191. [ 4.002075] USB Mass Storage support registered.
  192. [ 4.007232] usbcore: registered new interface driver libusual
  193. [ 4.013702] udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma)
  194. [ 4.020874] gadget: using random self ethernet address
  195. [ 4.026550] gadget: using random host ethernet address
  196. [ 4.033660] usb0: MAC de:21:8f:fc:f6:ef
  197. [ 4.037841] usb0: HOST MAC 6a:fd:f8:82:ae:13
  198. [ 4.042419] gadget: Ethernet Gadget, version: Memorial Day 2008
  199. [ 4.048858] gadget: g_ether ready
  200. [ 4.056945] musb-hdrc musb-hdrc: MUSB HDRC host driver
  201. [ 4.063232] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 2
  202. [ 4.071136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  203. [ 4.078399] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  204. [ 4.086090] usb usb2: Product: MUSB HDRC host driver
  205. [ 4.091339] usb usb2: Manufacturer: Linux 3.1.6-x6 musb-hcd
  206. [ 4.097229] usb usb2: SerialNumber: musb-hdrc
  207. [ 4.103057] hub 2-0:1.0: USB hub found
  208. [ 4.107208] hub 2-0:1.0: 1 port detected
  209. [ 4.113281] mousedev: PS/2 mouse device common for all mice
  210. [ 4.120452] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
  211. [ 4.133331] i2c /dev entries driver
  212. [ 4.138824] Linux media interface: v0.10
  213. [ 4.143280] lirc_dev: IR Remote Control driver registered, major 249
  214. [ 4.150177] Driver for 1-wire Dallas network protocol.
  215. [ 4.156158] omap_device: omap_wdt.-1: new worst case activate latency 0: 30517
  216. [ 4.164947] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  217. [ 4.171447] omap_device: omap_wdt.-1: new worst case deactivate latency 0: 30517
  218. [ 4.180267] twl4030_wdt twl4030_wdt: Failed to register misc device
  219. [ 4.187042] twl4030_wdt: probe of twl4030_wdt failed with error -16
  220. [ 4.195159] device-mapper: uevent: version 1.0.3
  221. [ 4.201934] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: [email protected]
  222. [ 4.212280] device-mapper: multipath: version 1.3.0 loaded
  223. [ 4.218231] device-mapper: multipath round-robin: version 1.0.0 loaded
  224. [ 4.226776] cpuidle: using governor ladder
  225. [ 4.231140] cpuidle: using governor menu
  226. [ 4.235443] sdhci: Secure Digital Host Controller Interface driver
  227. [ 4.242034] sdhci: Copyright(c) Pierre Ossman
  228. [ 4.247833] omap_device: omap_hsmmc.0: new worst case activate latency 0: 305175
  229. [ 4.257904] omap_device: omap_hsmmc.0: new worst case deactivate latency 0: 30517
  230. [ 4.266021] gpio_request: gpio-0 (mmc_wp) status -16
  231. [ 4.266082] omap_hsmmc: probe of omap_hsmmc.1 failed with error -16
  232. [ 4.273162] Registered led device: beagleboard::usr0
  233. [ 4.273345] Registered led device: beagleboard::usr1
  234. [ 4.275390] Registered led device: beagleboard::pmu_stat
  235. [ 4.277954] usbcore: registered new interface driver snd-usb-6fire
  236. [ 4.287109] OMAP3 Beagle/Devkit8000 SoC init
  237. [ 4.384582] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
  238. [ 4.392761] ALSA device list:
  239. [ 4.395935] #0: omap3beagle
  240. [ 4.399719] oprofile: using arm/armv7
  241. [ 4.405242] TCP cubic registered
  242. [ 4.410675] NET: Registered protocol family 10
  243. [ 4.420349] NET: Registered protocol family 17
  244. [ 4.425415] Registering the dns_resolver key type
  245. [ 4.430572] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  246. [ 4.438720] ThumbEE CPU extension supported.
  247. [ 4.443328] Registering SWP/SWPB emulation handler
  248. [ 4.450744] usb 1-2: new high speed USB device number 2 using ehci-omap
  249. [ 4.460449] omap3_idle_init: core off state C7 disabled due to i583
  250. [ 4.467834] sr_init: No PMIC hook to init smartreflex
  251. [ 4.473510] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
  252. [ 4.482269] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
  253. [ 4.490692] SmartReflex Class3 initialized
  254. [ 4.503570] clock: disabling unused clocks to save power
  255. [ 4.511352] registered taskstats version 1
  256. [ 4.516174] fbcvt: 1280x720@60: CVT Name - .921M9-R
  257. [ 4.545532] Console: switching to colour frame buffer device 160x45
  258. [ 4.564636] regulator_init_complete: VDAC: incomplete constraints, leaving on
  259. [ 4.573028] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  260. [ 4.580688] Freeing init memory: 356K
  261. [ 4.654266] usb 1-2: device descriptor read/64, error -71
  262. [ 4.800384] mmc0: host does not support reading read-only switch. assuming write-enable.
  263. [ 4.818298] mmc0: new SDHC card at address b368
  264. [ 4.834106] mmcblk0: mmc0:b368 USD 3.75 GiB
  265. [ 4.843872] mmcblk0: p1 p2
  266. [ 4.896362] usb 1-2: device descriptor read/64, error -71
  267. [ 4.929351] udevd[69]: starting version 173
  268. [ 5.138641] usb 1-2: new high speed USB device number 3 using ehci-omap
  269. [ 5.302673] usb 1-2: device descriptor read/64, error -71
  270. [ 5.552673] usb 1-2: device descriptor read/64, error -71
  271. [ 5.794830] usb 1-2: new high speed USB device number 4 using ehci-omap
  272. [ 6.240295] usb 1-2: device not accepting address 4, error -71
  273. [ 6.373046] usb 1-2: new high speed USB device number 5 using ehci-omap
  274. [ 6.810485] usb 1-2: device not accepting address 5, error -71
  275. [ 6.820465] hub 1-0:1.0: unable to enumerate USB device on port 2
  276. [ 7.139892] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  277. [ 8.076507] init: ureadahead main process (183) terminated with status 5
  278. [ 9.094543] udevd[224]: starting version 173
  279. [ 9.673645] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
  280. [ 13.264129] rtc-ds1307: probe of 2-0068 failed with error -5
  281. [ 13.265533] twl_rtc twl_rtc: Power up reset detected.
  282. [ 13.276550] twl_rtc twl_rtc: Enabling TWL-RTC.
  283. [ 13.278045] input: gpio-keys as /devices/platform/gpio-keys/input/input1
  284. [ 13.312255] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!