Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.1.6-gentoo-rlyeh-v2 (root@rlyeh) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #1 SMP Tue Jan 10 23:30:46 CST 2012
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.1.6-gentoo-rlyeh-v2 root=/dev/sda10
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
- [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000008fab8000 (usable)
- [ 0.000000] BIOS-e820: 000000008fab8000 - 000000008fb01000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000008fb01000 - 000000008fb0b000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000008fb0b000 - 000000008fb0f000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000008fb0f000 - 000000008fb10000 (usable)
- [ 0.000000] BIOS-e820: 000000008fb10000 - 000000008fb34000 (reserved)
- [ 0.000000] BIOS-e820: 000000008fb34000 - 000000008fb35000 (usable)
- [ 0.000000] BIOS-e820: 000000008fb35000 - 000000008fb46000 (reserved)
- [ 0.000000] BIOS-e820: 000000008fb46000 - 000000008fb4e000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000008fb4e000 - 000000008fb75000 (reserved)
- [ 0.000000] BIOS-e820: 000000008fb75000 - 000000008fd78000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000008fd78000 - 000000008ff00000 (usable)
- [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f8000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100001000 - 00000001cf000000 (usable)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI 2.7 present.
- [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 305V4A/305V5A/305V4A/305V4A, BIOS 02QN.MI99.20110908.SKK 09/08/2011
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] No AGP bridge found
- [ 0.000000] last_pfn = 0x1cf000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF write-through
- [ 0.000000] C0000-CEFFF write-protect
- [ 0.000000] CF000-DFFFF uncachable
- [ 0.000000] E0000-FFFFF write-through
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask FF00000000 write-back
- [ 0.000000] 1 base 008FF00000 mask FFFFF00000 uncachable
- [ 0.000000] 2 base 0090000000 mask FFF0000000 uncachable
- [ 0.000000] 3 base 00A0000000 mask FFE0000000 uncachable
- [ 0.000000] 4 base 00C0000000 mask FFC0000000 uncachable
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] TOM2: 00000001cf000000 aka 7408M
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820 update range: 000000008ff00000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0x8ff00 max_arch_pfn = 0x400000000
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] init_memory_mapping: 0000000000000000-000000008ff00000
- [ 0.000000] 0000000000 - 0080000000 page 1G
- [ 0.000000] 0080000000 - 008fe00000 page 2M
- [ 0.000000] 008fe00000 - 008ff00000 page 4k
- [ 0.000000] kernel direct mapping tables up to 8ff00000 @ 1fffd000-20000000
- [ 0.000000] init_memory_mapping: 0000000100000000-00000001cf000000
- [ 0.000000] 0100000000 - 01c0000000 page 1G
- [ 0.000000] 01c0000000 - 01cf000000 page 2M
- [ 0.000000] kernel direct mapping tables up to 1cf000000 @ 8fefe000-8ff00000
- [ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 SECCSD)
- [ 0.000000] ACPI: XSDT 000000008fb01070 0005C (v01 SECCSD LH43STAR 01072009 AMI 00010013)
- [ 0.000000] ACPI: FACP 000000008fb07d18 000F4 (v04 SECCSD LH43STAR 01072009 AMI 00010013)
- [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
- [ 0.000000] ACPI: DSDT 000000008fb01158 06BBF (v02 SECCSD LH43STAR 00000000 INTL 20051117)
- [ 0.000000] ACPI: FACS 000000008fb48f80 00040
- [ 0.000000] ACPI: APIC 000000008fb07e10 00072 (v03 SECCSD LH43STAR 01072009 AMI 00010013)
- [ 0.000000] ACPI: MCFG 000000008fb07e88 0003C (v01 A M I GMCH945. 01072009 MSFT 00000097)
- [ 0.000000] ACPI: SLIC 000000008fb07ec8 00176 (v01 SECCSD LH43STAR 01072009 AMI 00010013)
- [ 0.000000] ACPI: HPET 000000008fb08040 00038 (v01 SECCSD LH43STAR 01072009 AMI 00000004)
- [ 0.000000] ACPI: SSDT 000000008fb08078 00E34 (v01 AMD POWERNOW 00000001 AMD 00000001)
- [ 0.000000] ACPI: SSDT 000000008fb08eb0 0190A (v02 AMD ALIB 00000001 MSFT 04000000)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at 0000000000000000-00000001cf000000
- [ 0.000000] Initmem setup node 0 0000000000000000-00000001cf000000
- [ 0.000000] NODE_DATA [00000001ceffb000 - 00000001ceffffff]
- [ 0.000000] [ffffea0000000000-ffffea00073fffff] PMD -> [ffff8801c8e00000-ffff8801ce5fffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal 0x00100000 -> 0x001cf000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[6] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009e
- [ 0.000000] 0: 0x00000100 -> 0x0008fab8
- [ 0.000000] 0: 0x0008fb0f -> 0x0008fb10
- [ 0.000000] 0: 0x0008fb34 -> 0x0008fb35
- [ 0.000000] 0: 0x0008fd78 -> 0x0008ff00
- [ 0.000000] 0: 0x00100001 -> 0x001cf000
- [ 0.000000] On node 0 totalpages: 1436623
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 5 pages reserved
- [ 0.000000] DMA zone: 3913 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 16320 pages used for memmap
- [ 0.000000] DMA32 zone: 568450 pages, LIFO batch:31
- [ 0.000000] Normal zone: 13248 pages used for memmap
- [ 0.000000] Normal zone: 834623 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
- [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 000000008fab8000 - 000000008fb01000
- [ 0.000000] PM: Registered nosave memory: 000000008fb01000 - 000000008fb0b000
- [ 0.000000] PM: Registered nosave memory: 000000008fb0b000 - 000000008fb0f000
- [ 0.000000] PM: Registered nosave memory: 000000008fb10000 - 000000008fb34000
- [ 0.000000] PM: Registered nosave memory: 000000008fb35000 - 000000008fb46000
- [ 0.000000] PM: Registered nosave memory: 000000008fb46000 - 000000008fb4e000
- [ 0.000000] PM: Registered nosave memory: 000000008fb4e000 - 000000008fb75000
- [ 0.000000] PM: Registered nosave memory: 000000008fb75000 - 000000008fd78000
- [ 0.000000] PM: Registered nosave memory: 000000008ff00000 - 00000000e0000000
- [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
- [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
- [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
- [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
- [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
- [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
- [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
- [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
- [ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
- [ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
- [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
- [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
- [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
- [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
- [ 0.000000] Allocating PCI resources starting at 8ff00000 (gap: 8ff00000:50100000)
- [ 0.000000] setup_percpu: NR_CPUS:6 nr_cpumask_bits:6 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8801cec00000 s74752 r8192 d23552 u524288
- [ 0.000000] pcpu-alloc: s74752 r8192 d23552 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1406986
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.6-gentoo-rlyeh-v2 root=/dev/sda10
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 5575336k/7585792k available (8061k kernel code, 1839300k absent, 171156k reserved, 4847k data, 600k init)
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1796.710 MHz processor.
- [ 0.001002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3593.42 BogoMIPS (lpj=1796710)
- [ 0.001129] pid_max: default: 32768 minimum: 301
- [ 0.002429] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.005030] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.006240] Mount-cache hash table entries: 256
- [ 0.006457] Initializing cgroup subsys cpuacct
- [ 0.006569] Initializing cgroup subsys freezer
- [ 0.006631] Initializing cgroup subsys blkio
- [ 0.006713] tseg: 008ff00000
- [ 0.006714] CPU: Physical Processor ID: 0
- [ 0.006776] CPU: Processor Core ID: 0
- [ 0.006838] mce: CPU supports 6 MCE banks
- [ 0.006989] ACPI: Core revision 20110623
- [ 0.012420] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.022569] CPU0: AMD A8-3510MX APU with Radeon(tm) HD Graphics stepping 00
- [ 0.022998] Performance Events: AMD PMU driver.
- [ 0.022998] ... version: 0
- [ 0.022998] ... bit width: 48
- [ 0.022998] ... generic registers: 4
- [ 0.022998] ... value mask: 0000ffffffffffff
- [ 0.022998] ... max period: 00007fffffffffff
- [ 0.022998] ... fixed-purpose events: 0
- [ 0.022998] ... event mask: 000000000000000f
- [ 0.022998] MCE: In-kernel MCE decoding enabled.
- [ 0.022998] Booting Node 0, Processors #1
- [ 0.022998] smpboot cpu 1: start_ip = 99000
- [ 0.094038] #2
- [ 0.094120] smpboot cpu 2: start_ip = 99000
- [ 0.166030] #3 Ok.
- [ 0.166137] smpboot cpu 3: start_ip = 99000
- [ 0.237980] Brought up 4 CPUs
- [ 0.238091] Total of 4 processors activated (14373.22 BogoMIPS).
- [ 0.239136] PM: Registering ACPI NVS region at 8fab8000 (299008 bytes)
- [ 0.239136] PM: Registering ACPI NVS region at 8fb0b000 (16384 bytes)
- [ 0.239172] PM: Registering ACPI NVS region at 8fb46000 (32768 bytes)
- [ 0.239236] PM: Registering ACPI NVS region at 8fb75000 (2109440 bytes)
- [ 0.239411] NET: Registered protocol family 16
- [ 0.240112] Extended Config Space enabled on 0 nodes
- [ 0.240209] ACPI: bus type pci registered
- [ 0.240278] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.240975] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.283863] PCI: Using configuration type 1 for base access
- [ 0.283983] mtrr: your CPUs had inconsistent fixed MTRR settings
- [ 0.284080] mtrr: probably your BIOS does not setup all CPUs.
- [ 0.284145] mtrr: corrected configuration.
- [ 0.292996] bio: create slab <bio-0> at 0
- [ 0.293129] ACPI: Added _OSI(Module Device)
- [ 0.293129] ACPI: Added _OSI(Processor Device)
- [ 0.293151] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.293215] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.295619] ACPI: EC: Look up EC in DSDT
- [ 0.297590] ACPI: Executed 2 blocks of module-level executable AML code
- [ 0.311120] ACPI: Interpreter enabled
- [ 0.311239] ACPI: (supports S0 S3 S4 S5)
- [ 0.312064] ACPI: Using IOAPIC for interrupt routing
- [ 0.314067] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
- [ 0.315016] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
- [ 0.354127] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
- [ 0.355205] ACPI: No dock devices found.
- [ 0.355316] HEST: Table not found.
- [ 0.355382] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.355778] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.356331] pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af]
- [ 0.356446] pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7]
- [ 0.356512] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df]
- [ 0.356579] pci_root PNP0A03:00: host bridge window [io 0x1778-0xffff]
- [ 0.356645] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 0.356783] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
- [ 0.356922] pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xffffffff]
- [ 0.356971] pci 0000:00:00.0: [1022:1705] type 0 class 0x000600
- [ 0.357014] pci 0000:00:01.0: [1002:9641] type 0 class 0x000300
- [ 0.357024] pci 0000:00:01.0: reg 10: [mem 0xb0000000-0xbfffffff pref]
- [ 0.357032] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
- [ 0.357039] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
- [ 0.357076] pci 0000:00:01.0: supports D1 D2
- [ 0.357097] pci 0000:00:01.1: [1002:1714] type 0 class 0x000403
- [ 0.357107] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
- [ 0.357152] pci 0000:00:01.1: supports D1 D2
- [ 0.357178] pci 0000:00:02.0: [1022:1707] type 1 class 0x000604
- [ 0.357237] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
- [ 0.357242] pci 0000:00:02.0: PME# disabled
- [ 0.357315] pci 0000:00:04.0: [1022:1709] type 1 class 0x000604
- [ 0.357361] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
- [ 0.357364] pci 0000:00:04.0: PME# disabled
- [ 0.357452] pci 0000:00:11.0: [1022:7801] type 0 class 0x000106
- [ 0.357475] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
- [ 0.357486] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
- [ 0.357497] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
- [ 0.357508] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
- [ 0.357519] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
- [ 0.357531] pci 0000:00:11.0: reg 24: [mem 0xfeb50000-0xfeb507ff]
- [ 0.357584] pci 0000:00:12.0: [1022:7807] type 0 class 0x000c03
- [ 0.357600] pci 0000:00:12.0: reg 10: [mem 0xfeb4f000-0xfeb4ffff]
- [ 0.357680] pci 0000:00:12.2: [1022:7808] type 0 class 0x000c03
- [ 0.357701] pci 0000:00:12.2: reg 10: [mem 0xfeb4e000-0xfeb4e0ff]
- [ 0.357780] pci 0000:00:12.2: supports D1 D2
- [ 0.357782] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- [ 0.357787] pci 0000:00:12.2: PME# disabled
- [ 0.357812] pci 0000:00:13.0: [1022:7807] type 0 class 0x000c03
- [ 0.357827] pci 0000:00:13.0: reg 10: [mem 0xfeb4d000-0xfeb4dfff]
- [ 0.358025] pci 0000:00:13.2: [1022:7808] type 0 class 0x000c03
- [ 0.358047] pci 0000:00:13.2: reg 10: [mem 0xfeb4c000-0xfeb4c0ff]
- [ 0.358126] pci 0000:00:13.2: supports D1 D2
- [ 0.358128] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
- [ 0.358133] pci 0000:00:13.2: PME# disabled
- [ 0.358159] pci 0000:00:14.0: [1022:780b] type 0 class 0x000c05
- [ 0.358250] pci 0000:00:14.2: [1022:780d] type 0 class 0x000403
- [ 0.358274] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
- [ 0.358339] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- [ 0.358344] pci 0000:00:14.2: PME# disabled
- [ 0.358360] pci 0000:00:14.3: [1022:780e] type 0 class 0x000601
- [ 0.358445] pci 0000:00:14.4: [1022:780f] type 1 class 0x000604
- [ 0.358491] pci 0000:00:14.5: [1022:7809] type 0 class 0x000c03
- [ 0.358507] pci 0000:00:14.5: reg 10: [mem 0xfeb4b000-0xfeb4bfff]
- [ 0.358583] pci 0000:00:14.7: [1022:7806] type 0 class 0x000805
- [ 0.358608] pci 0000:00:14.7: reg 10: [mem 0xfeb4a000-0xfeb4a0ff 64bit]
- [ 0.358692] pci 0000:00:15.0: [1022:43a0] type 1 class 0x000604
- [ 0.358758] pci 0000:00:15.0: supports D1 D2
- [ 0.358790] pci 0000:00:15.2: [1022:43a2] type 1 class 0x000604
- [ 0.358857] pci 0000:00:15.2: supports D1 D2
- [ 0.358890] pci 0000:00:16.0: [1022:7807] type 0 class 0x000c03
- [ 0.358905] pci 0000:00:16.0: reg 10: [mem 0xfeb49000-0xfeb49fff]
- [ 0.358990] pci 0000:00:16.2: [1022:7808] type 0 class 0x000c03
- [ 0.359011] pci 0000:00:16.2: reg 10: [mem 0xfeb48000-0xfeb480ff]
- [ 0.359090] pci 0000:00:16.2: supports D1 D2
- [ 0.359092] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
- [ 0.359097] pci 0000:00:16.2: PME# disabled
- [ 0.359121] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
- [ 0.359156] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
- [ 0.359188] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
- [ 0.359221] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
- [ 0.359260] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
- [ 0.359291] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
- [ 0.359323] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
- [ 0.359355] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
- [ 0.359491] pci 0000:00:02.0: PCI bridge to [bus 01-01]
- [ 0.359667] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
- [ 0.359683] pci 0000:02:00.0: reg 10: [io 0xe000-0xe0ff]
- [ 0.359710] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
- [ 0.359727] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
- [ 0.359772] pci 0000:02:00.0: supports D1 D2
- [ 0.359775] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.359780] pci 0000:02:00.0: PME# disabled
- [ 0.360998] pci 0000:00:04.0: PCI bridge to [bus 02-02]
- [ 0.361128] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
- [ 0.361136] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
- [ 0.361211] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
- [ 0.361287] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
- [ 0.361290] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
- [ 0.361292] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
- [ 0.361295] pci 0000:00:14.4: bridge window [io 0x1778-0xffff] (subtractive decode)
- [ 0.361298] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.361300] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
- [ 0.361303] pci 0000:00:14.4: bridge window [mem 0xb0000000-0xffffffff] (subtractive decode)
- [ 0.361386] pci 0000:04:00.0: [168c:0032] type 0 class 0x000280
- [ 0.361415] pci 0000:04:00.0: reg 10: [mem 0xfea00000-0xfea7ffff 64bit]
- [ 0.361479] pci 0000:04:00.0: reg 30: [mem 0xfea80000-0xfea8ffff pref]
- [ 0.361523] pci 0000:04:00.0: supports D1 D2
- [ 0.361525] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.361532] pci 0000:04:00.0: PME# disabled
- [ 0.363020] pci 0000:00:15.0: PCI bridge to [bus 04-04]
- [ 0.363101] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
- [ 0.363165] pci 0000:00:15.2: PCI bridge to [bus 05-07]
- [ 0.363234] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
- [ 0.363239] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff]
- [ 0.363246] pci 0000:00:15.2: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.363281] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.363543] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
- [ 0.363632] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
- [ 0.363670] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
- [ 0.363706] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.363819] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
- [ 0.363956] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 0.376041] ACPI: PCI Interrupt Link [LN24] (IRQs *24)
- [ 0.376301] ACPI: PCI Interrupt Link [LN25] (IRQs *25)
- [ 0.376994] ACPI: PCI Interrupt Link [LN26] (IRQs *26)
- [ 0.377244] ACPI: PCI Interrupt Link [LN27] (IRQs *27)
- [ 0.377496] ACPI: PCI Interrupt Link [LN28] (IRQs *28)
- [ 0.377746] ACPI: PCI Interrupt Link [LN29] (IRQs *29)
- [ 0.377993] ACPI: PCI Interrupt Link [LN30] (IRQs *30)
- [ 0.378243] ACPI: PCI Interrupt Link [LN31] (IRQs *31)
- [ 0.378494] ACPI: PCI Interrupt Link [LN32] (IRQs *32)
- [ 0.378745] ACPI: PCI Interrupt Link [LN33] (IRQs *33)
- [ 0.378992] ACPI: PCI Interrupt Link [LN34] (IRQs *34)
- [ 0.379243] ACPI: PCI Interrupt Link [LN35] (IRQs *35)
- [ 0.379494] ACPI: PCI Interrupt Link [LN36] (IRQs *36)
- [ 0.379745] ACPI: PCI Interrupt Link [LN37] (IRQs *37)
- [ 0.380002] ACPI: PCI Interrupt Link [LN38] (IRQs *38)
- [ 0.380253] ACPI: PCI Interrupt Link [LN39] (IRQs *39)
- [ 0.380505] ACPI: PCI Interrupt Link [LN40] (IRQs *40)
- [ 0.380756] ACPI: PCI Interrupt Link [LN41] (IRQs *41)
- [ 0.380994] ACPI: PCI Interrupt Link [LN42] (IRQs *42)
- [ 0.381245] ACPI: PCI Interrupt Link [LN43] (IRQs *43)
- [ 0.381496] ACPI: PCI Interrupt Link [LN44] (IRQs *44)
- [ 0.381749] ACPI: PCI Interrupt Link [LN45] (IRQs *45)
- [ 0.382051] ACPI: PCI Interrupt Link [LN46] (IRQs *46)
- [ 0.382303] ACPI: PCI Interrupt Link [LN47] (IRQs *47)
- [ 0.382555] ACPI: PCI Interrupt Link [LN48] (IRQs *48)
- [ 0.382806] ACPI: PCI Interrupt Link [LN49] (IRQs *49)
- [ 0.383051] ACPI: PCI Interrupt Link [LN50] (IRQs *50)
- [ 0.383302] ACPI: PCI Interrupt Link [LN51] (IRQs *51)
- [ 0.383553] ACPI: PCI Interrupt Link [LN52] (IRQs *52)
- [ 0.383805] ACPI: PCI Interrupt Link [LN53] (IRQs *53)
- [ 0.384085] ACPI: PCI Interrupt Link [LN54] (IRQs *54)
- [ 0.384337] ACPI: PCI Interrupt Link [LN55] (IRQs *55)
- [ 0.384595] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.385094] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.385581] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.386032] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.386499] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.386999] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.387453] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.387907] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.388341] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.388341] vgaarb: loaded
- [ 0.388341] vgaarb: bridge control possible 0000:00:01.0
- [ 0.388965] SCSI subsystem initialized
- [ 0.389073] libata version 3.00 loaded.
- [ 0.389073] usbcore: registered new interface driver usbfs
- [ 0.389081] usbcore: registered new interface driver hub
- [ 0.389974] usbcore: registered new device driver usb
- [ 0.390071] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 0.390080] PCI: Using ACPI for IRQ routing
- [ 0.400429] PCI: pci_cache_line_size set to 64 bytes
- [ 0.400543] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
- [ 0.400546] reserve RAM buffer: 000000008fab8000 - 000000008fffffff
- [ 0.400550] reserve RAM buffer: 000000008fb10000 - 000000008fffffff
- [ 0.400553] reserve RAM buffer: 000000008fb35000 - 000000008fffffff
- [ 0.400556] reserve RAM buffer: 000000008ff00000 - 000000008fffffff
- [ 0.400559] reserve RAM buffer: 00000001cf000000 - 00000001cfffffff
- [ 0.400579] Bluetooth: Core ver 2.16
- [ 0.400966] NET: Registered protocol family 31
- [ 0.401062] Bluetooth: HCI device and connection manager initialized
- [ 0.401129] Bluetooth: HCI socket layer initialized
- [ 0.401194] Bluetooth: L2CAP socket layer initialized
- [ 0.401262] Bluetooth: SCO socket layer initialized
- [ 0.401335] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.402006] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.402212] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
- [ 0.403970] Switching to clocksource hpet
- [ 0.404525] Switched to NOHz mode on CPU #0
- [ 0.404615] Switched to NOHz mode on CPU #1
- [ 0.404641] Switched to NOHz mode on CPU #2
- [ 0.404653] Switched to NOHz mode on CPU #3
- [ 0.413784] pnp: PnP ACPI init
- [ 0.413860] ACPI: bus type pnp registered
- [ 0.414228] pnp 00:00: [bus 00-ff]
- [ 0.414231] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.414234] pnp 00:00: [io 0x0000-0x03af window]
- [ 0.414237] pnp 00:00: [io 0x03e0-0x0cf7 window]
- [ 0.414240] pnp 00:00: [io 0x03b0-0x03df window]
- [ 0.414242] pnp 00:00: [io 0x1778-0xffff window]
- [ 0.414245] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.414248] pnp 00:00: [mem 0x000c0000-0x000dffff window]
- [ 0.414251] pnp 00:00: [mem 0xb0000000-0xffffffff window]
- [ 0.414253] pnp 00:00: [mem 0x00000000 window]
- [ 0.414425] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
- [ 0.414477] pnp 00:01: [mem 0xe0000000-0xefffffff]
- [ 0.414664] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.414738] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.415299] pnp 00:02: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 0.415302] pnp 00:02: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 0.415505] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.415899] pnp 00:03: [io 0x0010-0x001f]
- [ 0.415902] pnp 00:03: [io 0x0022-0x003f]
- [ 0.415904] pnp 00:03: [io 0x0063]
- [ 0.415906] pnp 00:03: [io 0x0065]
- [ 0.415908] pnp 00:03: [io 0x0067-0x006f]
- [ 0.415912] pnp 00:03: [io 0x0072-0x007f]
- [ 0.415914] pnp 00:03: [io 0x0080]
- [ 0.415916] pnp 00:03: [io 0x0084-0x0086]
- [ 0.415918] pnp 00:03: [io 0x0088]
- [ 0.415920] pnp 00:03: [io 0x008c-0x008e]
- [ 0.415922] pnp 00:03: [io 0x0090-0x009f]
- [ 0.415924] pnp 00:03: [io 0x00a2-0x00bf]
- [ 0.415926] pnp 00:03: [io 0x00b1]
- [ 0.415928] pnp 00:03: [io 0x00e0-0x00ef]
- [ 0.415930] pnp 00:03: [io 0x04d0-0x04d1]
- [ 0.415932] pnp 00:03: [io 0x040b]
- [ 0.415934] pnp 00:03: [io 0x04d6]
- [ 0.415936] pnp 00:03: [io 0x0c00-0x0c01]
- [ 0.415938] pnp 00:03: [io 0x0c14]
- [ 0.415940] pnp 00:03: [io 0x0c50-0x0c51]
- [ 0.415942] pnp 00:03: [io 0x0c52]
- [ 0.415944] pnp 00:03: [io 0x0c6c]
- [ 0.415946] pnp 00:03: [io 0x0c6f]
- [ 0.415948] pnp 00:03: [io 0x0cd0-0x0cd1]
- [ 0.415950] pnp 00:03: [io 0x0cd2-0x0cd3]
- [ 0.415952] pnp 00:03: [io 0x0cd4-0x0cd5]
- [ 0.415954] pnp 00:03: [io 0x0cd6-0x0cd7]
- [ 0.415956] pnp 00:03: [io 0x0cd8-0x0cdf]
- [ 0.415958] pnp 00:03: [io 0x0800-0x089f]
- [ 0.415961] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.415964] pnp 00:03: [io 0x0000-0x000f]
- [ 0.415966] pnp 00:03: [io 0x0b20-0x0b3f]
- [ 0.415968] pnp 00:03: [io 0x0900-0x090f]
- [ 0.415970] pnp 00:03: [io 0x0910-0x091f]
- [ 0.415972] pnp 00:03: [io 0xfe00-0xfefe]
- [ 0.415974] pnp 00:03: [io 0x0060-0x005f disabled]
- [ 0.415977] pnp 00:03: [io 0x0064-0x0063 disabled]
- [ 0.415979] pnp 00:03: [mem 0xfec00000-0xfec00fff]
- [ 0.415982] pnp 00:03: [mem 0xfee00000-0xfee00fff]
- [ 0.415984] pnp 00:03: [mem 0xfed80000-0xfed8ffff]
- [ 0.415986] pnp 00:03: [mem 0xfed61000-0xfed70fff]
- [ 0.415988] pnp 00:03: [mem 0xfec10000-0xfec10fff]
- [ 0.415991] pnp 00:03: [mem 0xfed00000-0xfed00fff]
- [ 0.415993] pnp 00:03: [mem 0xff000000-0xffffffff]
- [ 0.416241] system 00:03: [io 0x04d0-0x04d1] has been reserved
- [ 0.416308] system 00:03: [io 0x040b] has been reserved
- [ 0.416373] system 00:03: [io 0x04d6] has been reserved
- [ 0.416438] system 00:03: [io 0x0c00-0x0c01] has been reserved
- [ 0.416504] system 00:03: [io 0x0c14] has been reserved
- [ 0.416569] system 00:03: [io 0x0c50-0x0c51] has been reserved
- [ 0.416635] system 00:03: [io 0x0c52] has been reserved
- [ 0.416700] system 00:03: [io 0x0c6c] has been reserved
- [ 0.416765] system 00:03: [io 0x0c6f] has been reserved
- [ 0.416829] system 00:03: [io 0x0cd0-0x0cd1] has been reserved
- [ 0.416895] system 00:03: [io 0x0cd2-0x0cd3] has been reserved
- [ 0.416961] system 00:03: [io 0x0cd4-0x0cd5] has been reserved
- [ 0.417040] system 00:03: [io 0x0cd6-0x0cd7] has been reserved
- [ 0.417105] system 00:03: [io 0x0cd8-0x0cdf] has been reserved
- [ 0.417172] system 00:03: [io 0x0800-0x089f] has been reserved
- [ 0.417238] system 00:03: [io 0x0b20-0x0b3f] has been reserved
- [ 0.417304] system 00:03: [io 0x0900-0x090f] has been reserved
- [ 0.417370] system 00:03: [io 0x0910-0x091f] has been reserved
- [ 0.417436] system 00:03: [io 0xfe00-0xfefe] has been reserved
- [ 0.417503] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.417571] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.417637] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved
- [ 0.417704] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved
- [ 0.417771] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
- [ 0.417837] system 00:03: [mem 0xfed00000-0xfed00fff] has been reserved
- [ 0.417904] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
- [ 0.417971] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.417988] pnp 00:04: [dma 4]
- [ 0.417990] pnp 00:04: [io 0x0000-0x000f]
- [ 0.417992] pnp 00:04: [io 0x0081-0x0083]
- [ 0.417996] pnp 00:04: [io 0x0087]
- [ 0.417998] pnp 00:04: [io 0x0089-0x008b]
- [ 0.418013] pnp 00:04: [io 0x008f]
- [ 0.418015] pnp 00:04: [io 0x00c0-0x00df]
- [ 0.418085] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.418099] pnp 00:05: [io 0x0070-0x0071]
- [ 0.418110] pnp 00:05: [irq 8]
- [ 0.418221] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.418252] pnp 00:06: [io 0x0061]
- [ 0.418408] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.418463] pnp 00:07: [io 0x0010-0x001f]
- [ 0.418465] pnp 00:07: [io 0x0022-0x003f]
- [ 0.418467] pnp 00:07: [io 0x0044-0x005f]
- [ 0.418469] pnp 00:07: [io 0x0072-0x007f]
- [ 0.418471] pnp 00:07: [io 0x0080]
- [ 0.418473] pnp 00:07: [io 0x0084-0x0086]
- [ 0.418475] pnp 00:07: [io 0x0088]
- [ 0.418477] pnp 00:07: [io 0x008c-0x008e]
- [ 0.418479] pnp 00:07: [io 0x0090-0x009f]
- [ 0.418481] pnp 00:07: [io 0x00a2-0x00bf]
- [ 0.418483] pnp 00:07: [io 0x00e0-0x00ef]
- [ 0.418485] pnp 00:07: [io 0x04d0-0x04d1]
- [ 0.418639] system 00:07: [io 0x04d0-0x04d1] has been reserved
- [ 0.418708] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.418720] pnp 00:08: [io 0x00f0-0x00ff]
- [ 0.418730] pnp 00:08: [irq 13]
- [ 0.418801] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.418871] pnp 00:09: [io 0x1770-0x1777]
- [ 0.419015] system 00:09: [io 0x1770-0x1777] has been reserved
- [ 0.419082] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.419101] pnp 00:0a: [io 0x0060]
- [ 0.419103] pnp 00:0a: [io 0x0064]
- [ 0.419108] pnp 00:0a: [irq 1]
- [ 0.419180] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- [ 0.419295] pnp 00:0b: [irq 12]
- [ 0.419384] pnp 00:0b: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
- [ 0.431818] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
- [ 0.432191] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.432211] pnp: PnP ACPI: found 13 devices
- [ 0.432327] ACPI: ACPI bus type pnp unregistered
- [ 0.437650] PCI: max bus depth: 1 pci_try_num: 2
- [ 0.437750] pci 0000:00:02.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
- [ 0.437819] pci 0000:00:02.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
- [ 0.437958] pci 0000:00:02.0: BAR 13: assigned [io 0x2000-0x2fff]
- [ 0.438036] pci 0000:00:02.0: PCI bridge to [bus 01-01]
- [ 0.438101] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
- [ 0.438166] pci 0000:00:02.0: bridge window [mem 0xd0100000-0xd02fffff]
- [ 0.438232] pci 0000:00:02.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
- [ 0.438370] pci 0000:00:04.0: PCI bridge to [bus 02-02]
- [ 0.438435] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
- [ 0.438502] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
- [ 0.438641] pci 0000:00:14.4: PCI bridge to [bus 03-03]
- [ 0.438715] pci 0000:00:15.0: PCI bridge to [bus 04-04]
- [ 0.438782] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
- [ 0.438852] pci 0000:00:15.2: PCI bridge to [bus 05-07]
- [ 0.438918] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
- [ 0.438985] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff]
- [ 0.439063] pci 0000:00:15.2: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.439227] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 0.439296] pci 0000:00:02.0: setting latency timer to 64
- [ 0.439306] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.439372] pci 0000:00:04.0: setting latency timer to 64
- [ 0.439385] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.439453] pci 0000:00:15.0: setting latency timer to 64
- [ 0.439460] pci 0000:00:15.2: enabling device (0006 -> 0007)
- [ 0.439525] pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.439592] pci 0000:00:15.2: setting latency timer to 64
- [ 0.439598] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
- [ 0.439600] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
- [ 0.439603] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
- [ 0.439605] pci_bus 0000:00: resource 7 [io 0x1778-0xffff]
- [ 0.439608] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
- [ 0.439611] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
- [ 0.439613] pci_bus 0000:00: resource 10 [mem 0xb0000000-0xffffffff]
- [ 0.439616] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
- [ 0.439619] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
- [ 0.439622] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
- [ 0.439625] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
- [ 0.439627] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
- [ 0.439631] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
- [ 0.439633] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
- [ 0.439636] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
- [ 0.439638] pci_bus 0000:03: resource 7 [io 0x1778-0xffff]
- [ 0.439641] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
- [ 0.439643] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
- [ 0.439646] pci_bus 0000:03: resource 10 [mem 0xb0000000-0xffffffff]
- [ 0.439649] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
- [ 0.439652] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
- [ 0.439654] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
- [ 0.439657] pci_bus 0000:05: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.439704] NET: Registered protocol family 2
- [ 0.440085] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.441656] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- [ 0.444835] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.445412] TCP: Hash tables configured (established 524288 bind 65536)
- [ 0.445526] TCP reno registered
- [ 0.445605] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.445740] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.445990] NET: Registered protocol family 1
- [ 0.446278] RPC: Registered named UNIX socket transport module.
- [ 0.446350] RPC: Registered udp transport module.
- [ 0.446414] RPC: Registered tcp transport module.
- [ 0.446478] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.446564] pci 0000:00:01.0: Boot video device
- [ 0.446851] PCI: CLS 64 bytes, default 64
- [ 0.446906] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.447035] Placing 64MB software IO TLB between ffff88008bab8000 - ffff88008fab8000
- [ 0.447130] software IO TLB at phys 0x8bab8000 - 0x8fab8000
- [ 0.449340] microcode: CPU0: patch_level=0x03000025
- [ 0.449431] microcode: CPU1: patch_level=0x03000025
- [ 0.449512] microcode: CPU2: patch_level=0x03000025
- [ 0.449584] microcode: CPU3: patch_level=0x03000025
- [ 0.449731] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.464712] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.500519] NTFS driver 2.1.30 [Flags: R/W].
- [ 0.501014] JFS: nTxBlock = 8192, nTxLock = 65536
- [ 0.503855] SGI XFS with security attributes, large block/inode numbers, no debug enabled
- [ 0.506495] Btrfs loaded
- [ 0.506570] msgmni has been set to 10889
- [ 0.508609] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.508754] io scheduler noop registered
- [ 0.508817] io scheduler deadline registered
- [ 0.509042] io scheduler cfq registered (default)
- [ 0.509780] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.509985] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.568397] Non-volatile memory driver v1.3
- [ 0.568464] Linux agpgart interface v0.103
- [ 0.577574] ACPI: AC Adapter [ADP1] (off-line)
- [ 0.578059] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
- [ 0.582322] ACPI: Lid Switch [LID]
- [ 0.582592] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
- [ 0.582737] ACPI: Power Button [PWRB]
- [ 0.582995] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- [ 0.583169] ACPI: Power Button [PWRF]
- [ 0.583510] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
- [ 0.599303] acpi device:0d: registered as cooling_device0
- [ 0.599506] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input3
- [ 0.599648] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
- [ 0.599872] ACPI: acpi_idle registered with cpuidle
- [ 0.627100] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.627216] ACPI: Thermal Zone [TZ00] (61 C)
- [ 0.627866] ERST: Table is not found!
- [ 0.630349] loop: module loaded
- [ 0.631108] ahci 0000:00:11.0: version 3.0
- [ 0.631186] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 0.631369] ahci 0000:00:11.0: irq 40 for MSI/MSI-X
- [ 0.631456] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
- [ 0.631598] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
- [ 0.633726] scsi0 : ahci
- [ 0.634138] scsi1 : ahci
- [ 0.634366] scsi2 : ahci
- [ 0.634682] scsi3 : ahci
- [ 0.634977] scsi4 : ahci
- [ 0.635245] scsi5 : ahci
- [ 0.635445] ata1: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50100 irq 40
- [ 0.635585] ata2: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50180 irq 40
- [ 0.635724] ata3: DUMMY
- [ 0.635786] ata4: DUMMY
- [ 0.635847] ata5: DUMMY
- [ 0.635911] ata6: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50380 irq 40
- [ 0.636978] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 0.637116] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.637234] r8169 0000:02:00.0: setting latency timer to 64
- [ 0.637301] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
- [ 0.637659] r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000c1e000, e8:11:32:91:dd:cc, XID 0c900800 IRQ 41
- [ 0.637879] ath9k 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.637969] ath9k 0000:04:00.0: setting latency timer to 64
- [ 0.642333] ACPI: Battery Slot [BAT1] (battery present)
- [ 0.643524] ath: timeout (1000 us) on reg 0x15f18: 0x00000000 & 0x00000007 != 0x00000004
- [ 0.645870] ath: EEPROM regdomain: 0x65
- [ 0.645871] ath: EEPROM indicates we should expect a direct regpair map
- [ 0.645875] ath: Country alpha2 being used: 00
- [ 0.645877] ath: Regpair used: 0x65
- [ 0.647280] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
- [ 0.648070] Registered led device: ath9k-phy0
- [ 0.648084] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90011d80000, irq=16
- [ 0.648566] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.648633] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
- [ 0.648670] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.648763] ehci_hcd 0000:00:12.2: EHCI Host Controller
- [ 0.648845] drivers/usb/core/inode.c: creating file 'devices'
- [ 0.648849] drivers/usb/core/inode.c: creating file '001'
- [ 0.648968] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
- [ 0.649090] ehci_hcd 0000:00:12.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
- [ 0.649095] ehci_hcd 0000:00:12.2: reset hcc_params a076 thresh 7 uframes 256/512/1024 park
- [ 0.649100] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 0.649250] ehci_hcd 0000:00:12.2: park 0
- [ 0.649267] QUIRK: Enable AMD PLL fix
- [ 0.649279] ehci_hcd 0000:00:12.2: debug port 1
- [ 0.649348] ehci_hcd 0000:00:12.2: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
- [ 0.649358] ehci_hcd 0000:00:12.2: MWI active
- [ 0.649360] ehci_hcd 0000:00:12.2: supports USB remote wakeup
- [ 0.649379] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4e000
- [ 0.649447] ehci_hcd 0000:00:12.2: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
- [ 0.649455] ehci_hcd 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
- [ 0.655077] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 0.655174] usb usb1: default language 0x0409
- [ 0.655181] usb usb1: udev 1, busnum 1, minor = 0
- [ 0.655184] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.655248] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.655384] usb usb1: Product: EHCI Host Controller
- [ 0.655448] usb usb1: Manufacturer: Linux 3.1.6-gentoo-rlyeh-v2 ehci_hcd
- [ 0.655511] usb usb1: SerialNumber: 0000:00:12.2
- [ 0.655849] usb usb1: usb_probe_device
- [ 0.655853] usb usb1: configuration #1 chosen from 1 choice
- [ 0.655860] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 0.655988] hub 1-0:1.0: usb_probe_interface
- [ 0.655990] hub 1-0:1.0: usb_probe_interface - got id
- [ 0.655993] hub 1-0:1.0: USB hub found
- [ 0.656079] hub 1-0:1.0: 5 ports detected
- [ 0.656141] hub 1-0:1.0: standalone hub
- [ 0.656143] hub 1-0:1.0: no power switching (usb 1.0)
- [ 0.656145] hub 1-0:1.0: individual port over-current protection
- [ 0.656148] hub 1-0:1.0: power on to power good time: 20ms
- [ 0.656152] hub 1-0:1.0: local power source is good
- [ 0.656155] hub 1-0:1.0: trying to enable port power on non-switchable hub
- [ 0.656183] drivers/usb/core/inode.c: creating file '001'
- [ 0.656271] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.656345] ehci_hcd 0000:00:13.2: EHCI Host Controller
- [ 0.656410] drivers/usb/core/inode.c: creating file '002'
- [ 0.656582] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
- [ 0.656736] ehci_hcd 0000:00:13.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
- [ 0.656741] ehci_hcd 0000:00:13.2: reset hcc_params a076 thresh 7 uframes 256/512/1024 park
- [ 0.656745] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 0.656895] ehci_hcd 0000:00:13.2: park 0
- [ 0.656907] ehci_hcd 0000:00:13.2: debug port 1
- [ 0.656974] ehci_hcd 0000:00:13.2: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
- [ 0.656984] ehci_hcd 0000:00:13.2: MWI active
- [ 0.656986] ehci_hcd 0000:00:13.2: supports USB remote wakeup
- [ 0.656997] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb4c000
- [ 0.657094] ehci_hcd 0000:00:13.2: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
- [ 0.657102] ehci_hcd 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
- [ 0.663076] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
- [ 0.663182] usb usb2: default language 0x0409
- [ 0.663190] usb usb2: udev 1, busnum 2, minor = 128
- [ 0.663192] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.663258] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.663397] usb usb2: Product: EHCI Host Controller
- [ 0.663461] usb usb2: Manufacturer: Linux 3.1.6-gentoo-rlyeh-v2 ehci_hcd
- [ 0.663527] usb usb2: SerialNumber: 0000:00:13.2
- [ 0.663877] usb usb2: usb_probe_device
- [ 0.663884] usb usb2: configuration #1 chosen from 1 choice
- [ 0.663900] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 0.664102] hub 2-0:1.0: usb_probe_interface
- [ 0.664104] hub 2-0:1.0: usb_probe_interface - got id
- [ 0.664107] hub 2-0:1.0: USB hub found
- [ 0.664177] hub 2-0:1.0: 5 ports detected
- [ 0.664241] hub 2-0:1.0: standalone hub
- [ 0.664243] hub 2-0:1.0: no power switching (usb 1.0)
- [ 0.664245] hub 2-0:1.0: individual port over-current protection
- [ 0.664248] hub 2-0:1.0: power on to power good time: 20ms
- [ 0.664252] hub 2-0:1.0: local power source is good
- [ 0.664254] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 0.664288] drivers/usb/core/inode.c: creating file '001'
- [ 0.664402] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.664495] ehci_hcd 0000:00:16.2: EHCI Host Controller
- [ 0.664564] drivers/usb/core/inode.c: creating file '003'
- [ 0.664791] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
- [ 0.664947] ehci_hcd 0000:00:16.2: reset hcs_params 0x101404 dbg=1 cc=1 pcc=4 ordered !ppc ports=4
- [ 0.664951] ehci_hcd 0000:00:16.2: reset hcc_params a076 thresh 7 uframes 256/512/1024 park
- [ 0.664956] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 0.665085] ehci_hcd 0000:00:16.2: park 0
- [ 0.665098] ehci_hcd 0000:00:16.2: debug port 1
- [ 0.665166] ehci_hcd 0000:00:16.2: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
- [ 0.665176] ehci_hcd 0000:00:16.2: MWI active
- [ 0.665179] ehci_hcd 0000:00:16.2: supports USB remote wakeup
- [ 0.665190] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb48000
- [ 0.665258] ehci_hcd 0000:00:16.2: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
- [ 0.665266] ehci_hcd 0000:00:16.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
- [ 0.671082] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
- [ 0.671187] usb usb3: default language 0x0409
- [ 0.671194] usb usb3: udev 1, busnum 3, minor = 256
- [ 0.671196] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.671307] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.671443] usb usb3: Product: EHCI Host Controller
- [ 0.671506] usb usb3: Manufacturer: Linux 3.1.6-gentoo-rlyeh-v2 ehci_hcd
- [ 0.671570] usb usb3: SerialNumber: 0000:00:16.2
- [ 0.671933] usb usb3: usb_probe_device
- [ 0.671940] usb usb3: configuration #1 chosen from 1 choice
- [ 0.671957] usb usb3: adding 3-0:1.0 (config #1, interface 0)
- [ 0.672248] hub 3-0:1.0: usb_probe_interface
- [ 0.672253] hub 3-0:1.0: usb_probe_interface - got id
- [ 0.672257] hub 3-0:1.0: USB hub found
- [ 0.672332] hub 3-0:1.0: 4 ports detected
- [ 0.672395] hub 3-0:1.0: standalone hub
- [ 0.672397] hub 3-0:1.0: no power switching (usb 1.0)
- [ 0.672399] hub 3-0:1.0: individual port over-current protection
- [ 0.672401] hub 3-0:1.0: power on to power good time: 20ms
- [ 0.672406] hub 3-0:1.0: local power source is good
- [ 0.672408] hub 3-0:1.0: trying to enable port power on non-switchable hub
- [ 0.672452] drivers/usb/core/inode.c: creating file '001'
- [ 0.672689] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.672760] ohci_hcd: block sizes: ed 80 td 96
- [ 0.672802] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 0.672895] ohci_hcd 0000:00:12.0: OHCI Host Controller
- [ 0.672965] drivers/usb/core/inode.c: creating file '004'
- [ 0.673200] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
- [ 0.673374] ohci_hcd 0000:00:12.0: created debug files
- [ 0.673396] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4f000
- [ 0.728108] ohci_hcd 0000:00:12.0: OHCI controller state
- [ 0.728141] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers
- [ 0.728146] ohci_hcd 0000:00:12.0: control 0x083 HCFS=operational CBSR=3
- [ 0.728151] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0
- [ 0.728156] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF
- [ 0.728160] ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 0.728170] ohci_hcd 0000:00:12.0: hcca frame #0005
- [ 0.728175] ohci_hcd 0000:00:12.0: roothub.a 02000205 POTPGT=2 NPS NDP=5(5)
- [ 0.728179] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000
- [ 0.728183] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE
- [ 0.728188] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS
- [ 0.728192] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS
- [ 0.728197] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS
- [ 0.728201] ohci_hcd 0000:00:12.0: roothub.portstatus [3] 0x00000100 PPS
- [ 0.728206] ohci_hcd 0000:00:12.0: roothub.portstatus [4] 0x00000100 PPS
- [ 0.728222] usb usb4: default language 0x0409
- [ 0.728229] usb usb4: udev 1, busnum 4, minor = 384
- [ 0.728231] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.728298] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.728437] usb usb4: Product: OHCI Host Controller
- [ 0.728501] usb usb4: Manufacturer: Linux 3.1.6-gentoo-rlyeh-v2 ohci_hcd
- [ 0.728567] usb usb4: SerialNumber: 0000:00:12.0
- [ 0.728877] usb usb4: usb_probe_device
- [ 0.728883] usb usb4: configuration #1 chosen from 1 choice
- [ 0.728898] usb usb4: adding 4-0:1.0 (config #1, interface 0)
- [ 0.729210] hub 4-0:1.0: usb_probe_interface
- [ 0.729216] hub 4-0:1.0: usb_probe_interface - got id
- [ 0.729220] hub 4-0:1.0: USB hub found
- [ 0.729297] hub 4-0:1.0: 5 ports detected
- [ 0.729360] hub 4-0:1.0: standalone hub
- [ 0.729362] hub 4-0:1.0: no power switching (usb 1.0)
- [ 0.729364] hub 4-0:1.0: global over-current protection
- [ 0.729366] hub 4-0:1.0: power on to power good time: 4ms
- [ 0.729371] hub 4-0:1.0: local power source is good
- [ 0.729373] hub 4-0:1.0: no over-current condition exists
- [ 0.729376] hub 4-0:1.0: trying to enable port power on non-switchable hub
- [ 0.729405] drivers/usb/core/inode.c: creating file '001'
- [ 0.729477] ehci_hcd 0000:00:12.2: HS companion for 0000:00:12.0
- [ 0.729511] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 0.729603] ohci_hcd 0000:00:13.0: OHCI Host Controller
- [ 0.729677] drivers/usb/core/inode.c: creating file '005'
- [ 0.730045] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
- [ 0.730171] ohci_hcd 0000:00:13.0: created debug files
- [ 0.730182] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4d000
- [ 0.756227] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0000
- [ 0.764145] ehci_hcd 0000:00:13.2: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.764153] hub 2-0:1.0: port 1: status 0501 change 0001
- [ 0.764163] ehci_hcd 0000:00:13.2: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.764166] hub 2-0:1.0: port 2: status 0501 change 0001
- [ 0.772223] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000
- [ 0.785135] ohci_hcd 0000:00:13.0: OHCI controller state
- [ 0.785155] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
- [ 0.785159] ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3
- [ 0.785163] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
- [ 0.785166] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
- [ 0.785170] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 0.785178] ohci_hcd 0000:00:13.0: hcca frame #0004
- [ 0.785182] ohci_hcd 0000:00:13.0: roothub.a 02000205 POTPGT=2 NPS NDP=5(5)
- [ 0.785185] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
- [ 0.785188] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
- [ 0.785191] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
- [ 0.785195] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
- [ 0.785198] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
- [ 0.785201] ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
- [ 0.785204] ohci_hcd 0000:00:13.0: roothub.portstatus [4] 0x00000100 PPS
- [ 0.785221] usb usb5: default language 0x0409
- [ 0.785226] usb usb5: udev 1, busnum 5, minor = 512
- [ 0.785228] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.785294] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.785430] usb usb5: Product: OHCI Host Controller
- [ 0.785493] usb usb5: Manufacturer: Linux 3.1.6-gentoo-rlyeh-v2 ohci_hcd
- [ 0.785556] usb usb5: SerialNumber: 0000:00:13.0
- [ 0.786025] usb usb5: usb_probe_device
- [ 0.786031] usb usb5: configuration #1 chosen from 1 choice
- [ 0.786043] usb usb5: adding 5-0:1.0 (config #1, interface 0)
- [ 0.786331] hub 5-0:1.0: usb_probe_interface
- [ 0.786337] hub 5-0:1.0: usb_probe_interface - got id
- [ 0.786340] hub 5-0:1.0: USB hub found
- [ 0.786416] hub 5-0:1.0: 5 ports detected
- [ 0.786478] hub 5-0:1.0: standalone hub
- [ 0.786480] hub 5-0:1.0: no power switching (usb 1.0)
- [ 0.786481] hub 5-0:1.0: global over-current protection
- [ 0.786483] hub 5-0:1.0: power on to power good time: 4ms
- [ 0.786487] hub 5-0:1.0: local power source is good
- [ 0.786489] hub 5-0:1.0: no over-current condition exists
- [ 0.786490] hub 5-0:1.0: trying to enable port power on non-switchable hub
- [ 0.786514] drivers/usb/core/inode.c: creating file '001'
- [ 0.786602] ehci_hcd 0000:00:13.2: HS companion for 0000:00:13.0
- [ 0.786629] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.786720] ohci_hcd 0000:00:14.5: OHCI Host Controller
- [ 0.786786] drivers/usb/core/inode.c: creating file '006'
- [ 0.787127] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
- [ 0.787272] ohci_hcd 0000:00:14.5: created debug files
- [ 0.787281] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4b000
- [ 0.829170] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0000
- [ 0.842206] ohci_hcd 0000:00:14.5: OHCI controller state
- [ 0.842259] ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers
- [ 0.842263] ohci_hcd 0000:00:14.5: control 0x083 HCFS=operational CBSR=3
- [ 0.842266] ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0
- [ 0.842270] ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF
- [ 0.842273] ohci_hcd 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 0.842282] ohci_hcd 0000:00:14.5: hcca frame #0004
- [ 0.842286] ohci_hcd 0000:00:14.5: roothub.a 02000202 POTPGT=2 NPS NDP=2(2)
- [ 0.842289] ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000
- [ 0.842292] ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE
- [ 0.842295] ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS
- [ 0.842298] ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS
- [ 0.842315] usb usb6: default language 0x0409
- [ 0.842321] usb usb6: udev 1, busnum 6, minor = 640
- [ 0.842322] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.842388] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.842524] usb usb6: Product: OHCI Host Controller
- [ 0.842587] usb usb6: Manufacturer: Linux 3.1.6-gentoo-rlyeh-v2 ohci_hcd
- [ 0.842651] usb usb6: SerialNumber: 0000:00:14.5
- [ 0.843114] usb usb6: usb_probe_device
- [ 0.843121] usb usb6: configuration #1 chosen from 1 choice
- [ 0.843137] usb usb6: adding 6-0:1.0 (config #1, interface 0)
- [ 0.843396] hub 6-0:1.0: usb_probe_interface
- [ 0.843402] hub 6-0:1.0: usb_probe_interface - got id
- [ 0.843405] hub 6-0:1.0: USB hub found
- [ 0.843480] hub 6-0:1.0: 2 ports detected
- [ 0.843542] hub 6-0:1.0: standalone hub
- [ 0.843543] hub 6-0:1.0: no power switching (usb 1.0)
- [ 0.843545] hub 6-0:1.0: global over-current protection
- [ 0.843546] hub 6-0:1.0: power on to power good time: 4ms
- [ 0.843551] hub 6-0:1.0: local power source is good
- [ 0.843552] hub 6-0:1.0: no over-current condition exists
- [ 0.843554] hub 6-0:1.0: trying to enable port power on non-switchable hub
- [ 0.843582] drivers/usb/core/inode.c: creating file '001'
- [ 0.843687] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 0.843775] ohci_hcd 0000:00:16.0: OHCI Host Controller
- [ 0.843842] drivers/usb/core/inode.c: creating file '007'
- [ 0.844181] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
- [ 0.844352] ohci_hcd 0000:00:16.0: created debug files
- [ 0.844363] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb49000
- [ 0.864272] hub 2-0:1.0: state 7 ports 5 chg 0006 evt 0000
- [ 0.864296] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 0.899206] ohci_hcd 0000:00:16.0: OHCI controller state
- [ 0.899259] ohci_hcd 0000:00:16.0: OHCI 1.0, NO legacy support registers
- [ 0.899263] ohci_hcd 0000:00:16.0: control 0x083 HCFS=operational CBSR=3
- [ 0.899266] ohci_hcd 0000:00:16.0: cmdstatus 0x00000 SOC=0
- [ 0.899270] ohci_hcd 0000:00:16.0: intrstatus 0x00000004 SF
- [ 0.899273] ohci_hcd 0000:00:16.0: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 0.899282] ohci_hcd 0000:00:16.0: hcca frame #0004
- [ 0.899286] ohci_hcd 0000:00:16.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4)
- [ 0.899289] ohci_hcd 0000:00:16.0: roothub.b 00000000 PPCM=0000 DR=0000
- [ 0.899292] ohci_hcd 0000:00:16.0: roothub.status 00008000 DRWE
- [ 0.899295] ohci_hcd 0000:00:16.0: roothub.portstatus [0] 0x00000100 PPS
- [ 0.899298] ohci_hcd 0000:00:16.0: roothub.portstatus [1] 0x00000100 PPS
- [ 0.899302] ohci_hcd 0000:00:16.0: roothub.portstatus [2] 0x00000100 PPS
- [ 0.899305] ohci_hcd 0000:00:16.0: roothub.portstatus [3] 0x00000100 PPS
- [ 0.899321] usb usb7: default language 0x0409
- [ 0.899327] usb usb7: udev 1, busnum 7, minor = 768
- [ 0.899329] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.899395] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.899531] usb usb7: Product: OHCI Host Controller
- [ 0.899593] usb usb7: Manufacturer: Linux 3.1.6-gentoo-rlyeh-v2 ohci_hcd
- [ 0.899657] usb usb7: SerialNumber: 0000:00:16.0
- [ 0.900123] usb usb7: usb_probe_device
- [ 0.900129] usb usb7: configuration #1 chosen from 1 choice
- [ 0.900146] usb usb7: adding 7-0:1.0 (config #1, interface 0)
- [ 0.900410] hub 7-0:1.0: usb_probe_interface
- [ 0.900416] hub 7-0:1.0: usb_probe_interface - got id
- [ 0.900419] hub 7-0:1.0: USB hub found
- [ 0.900494] hub 7-0:1.0: 4 ports detected
- [ 0.900556] hub 7-0:1.0: standalone hub
- [ 0.900557] hub 7-0:1.0: no power switching (usb 1.0)
- [ 0.900559] hub 7-0:1.0: global over-current protection
- [ 0.900560] hub 7-0:1.0: power on to power good time: 4ms
- [ 0.900565] hub 7-0:1.0: local power source is good
- [ 0.900566] hub 7-0:1.0: no over-current condition exists
- [ 0.900568] hub 7-0:1.0: trying to enable port power on non-switchable hub
- [ 0.900592] drivers/usb/core/inode.c: creating file '001'
- [ 0.900632] ehci_hcd 0000:00:16.2: HS companion for 0000:00:16.0
- [ 0.900960] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.901320] usbcore: registered new interface driver usblp
- [ 0.901384] Initializing USB Mass Storage driver...
- [ 0.901551] usbcore: registered new interface driver usb-storage
- [ 0.901619] USB Mass Storage support registered.
- [ 0.901827] usbcore: registered new interface driver libusual
- [ 0.902050] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
- [ 0.905811] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.905877] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.906265] mousedev: PS/2 mouse device common for all mice
- [ 0.906952] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 0.907059] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 0.907512] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
- [ 0.908541] cpuidle: using governor ladder
- [ 0.908984] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 0.910483] cpuidle: using governor menu
- [ 0.910551] EFI Variables Facility v0.08 2004-May-17
- [ 0.911450] usbcore: registered new interface driver usbhid
- [ 0.911514] usbhid: USB HID core driver
- [ 0.912323] snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.912487] snd_hda_intel 0000:00:01.1: irq 42 for MSI/MSI-X
- [ 0.912504] snd_hda_intel 0000:00:01.1: setting latency timer to 64
- [ 0.915078] ehci_hcd 0000:00:13.2: port 1 full speed --> companion
- [ 0.915095] ehci_hcd 0000:00:13.2: GetStatus port:1 status 003801 0 ACK POWER OWNER sig=j CONNECT
- [ 0.915110] hub 2-0:1.0: port 1 not reset yet, waiting 50ms
- [ 0.917717] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
- [ 0.918713] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.929276] hda_codec: ALC269VB: BIOS auto-probing.
- [ 0.935579] ALSA device list:
- [ 0.935646] #0: HD-Audio Generic at 0xfeb44000 irq 42
- [ 0.935709] #1: HD-Audio Generic at 0xfeb40000 irq 16
- [ 0.935941] Netfilter messages via NETLINK v0.30.
- [ 0.936044] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 0.936330] ctnetlink v0.93: registering with nfnetlink.
- [ 0.936747] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.936851] TCP cubic registered
- [ 0.936914] Initializing XFRM netlink socket
- [ 0.937319] NET: Registered protocol family 10
- [ 0.938363] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.938465] IPv6 over IPv4 tunneling driver
- [ 0.939182] NET: Registered protocol family 17
- [ 0.939271] Registering the dns_resolver key type
- [ 0.939634] PM: Hibernation image not present or could not be loaded.
- [ 0.941051] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 0.941160] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 0.941260] ata6: SATA link down (SStatus 0 SControl 300)
- [ 0.944281] ata2.00: ATAPI: SlimtypeDVD A DS8A5SH, XS21, max UDMA/100
- [ 0.945856] ata2.00: configured for UDMA/100
- [ 0.947272] ata1.00: ATA-8: SAMSUNG HM641JI, 2AJ10002, max UDMA/133
- [ 0.947339] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 0.953384] console [netcon0] enabled
- [ 0.953454] netconsole: network logging started
- [ 0.953647] ata1.00: configured for UDMA/133
- [ 0.954033] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM641JI 2AJ1 PQ: 0 ANSI: 5
- [ 0.954648] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
- [ 0.954714] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 0.954849] sd 0:0:0:0: [sda] Write Protect is off
- [ 0.954915] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 0.954932] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.955406] powernow-k8: Found 1 AMD A8-3510MX APU with Radeon(tm) HD Graphics (4 cpu cores) (version 2.20.00)
- [ 0.955553] powernow-k8: Core Performance Boosting: on.
- [ 0.955678] powernow-k8: 0 : pstate 0 (1800 MHz)
- [ 0.955761] powernow-k8: 1 : pstate 1 (1700 MHz)
- [ 0.955822] powernow-k8: 2 : pstate 2 (1600 MHz)
- [ 0.955887] powernow-k8: 3 : pstate 3 (1400 MHz)
- [ 0.955947] powernow-k8: 4 : pstate 4 (1200 MHz)
- [ 0.956027] powernow-k8: 5 : pstate 5 (1000 MHz)
- [ 0.956096] powernow-k8: 6 : pstate 6 (800 MHz)
- [ 0.958962] Initializing network drop monitor service
- [ 0.959605] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A5SH XS21 PQ: 0 ANSI: 5
- [ 0.964837] sr0: scsi3-mmc drive: 8x/8x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 0.964945] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 0.965458] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 0.965615] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 0.966057] ehci_hcd 0000:00:13.2: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 0.966086] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
- [ 1.017048] ehci_hcd 0000:00:13.2: port 2 high speed
- [ 1.017059] ehci_hcd 0000:00:13.2: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.059825] alps.c: E6 report: 3c 03 00
- [ 1.067220] sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 >
- [ 1.068095] usb 2-2: new high speed USB device number 3 using ehci_hcd
- [ 1.068984] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.122182] ehci_hcd 0000:00:13.2: port 2 high speed
- [ 1.122190] ehci_hcd 0000:00:13.2: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 1.331501] usb 2-2: skipped 1 descriptor after configuration
- [ 1.331511] usb 2-2: skipped 5 descriptors after interface
- [ 1.331518] usb 2-2: skipped 1 descriptor after endpoint
- [ 1.331526] usb 2-2: skipped 23 descriptors after interface
- [ 1.333614] usb 2-2: default language 0x0409
- [ 1.344742] usb 2-2: udev 3, busnum 2, minor = 130
- [ 1.344751] usb 2-2: New USB device found, idVendor=2232, idProduct=1008
- [ 1.344827] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.344895] usb 2-2: Product: WebCam SCB-1100N
- [ 1.344957] usb 2-2: Manufacturer: 123
- [ 1.345443] usb 2-2: usb_probe_device
- [ 1.345449] usb 2-2: configuration #1 chosen from 1 choice
- [ 1.346108] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
- [ 1.448228] Refined TSC clocksource calibration: 1796.733 MHz.
- [ 1.448309] Switching to clocksource tsc
- [ 1.517428] usb 2-2: adding 2-2:1.1 (config #1, interface 1)
- [ 1.517837] drivers/usb/core/inode.c: creating file '003'
- [ 1.517878] hub 5-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 1.517921] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
- [ 1.517927] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
- [ 1.621118] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
- [ 1.683148] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
- [ 1.684611] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
- [ 1.688934] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
- [ 1.694575] EXT3-fs (sda10): error: couldn't mount because of unsupported optional features (240)
- [ 1.700495] EXT2-fs (sda10): error: couldn't mount because of unsupported optional features (240)
- [ 1.734149] usb 5-1: new full speed USB device number 2 using ohci_hcd
- [ 1.752155] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
- [ 1.752358] VFS: Mounted root (ext4 filesystem) readonly on device 8:10.
- [ 1.753340] Freeing unused kernel memory: 600k freed
- [ 1.753566] Write protecting the kernel read-only data: 12288k
- [ 1.754355] Freeing unused kernel memory: 112k freed
- [ 1.759521] Freeing unused kernel memory: 1400k freed
- [ 1.797249] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
- [ 1.868142] usb 5-1: default language 0x0409
- [ 1.874135] usb 5-1: udev 2, busnum 5, minor = 513
- [ 1.874141] usb 5-1: New USB device found, idVendor=0cf3, idProduct=3004
- [ 1.874222] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.874292] usb 5-1: Product: Bluetooth USB Host Controller
- [ 1.874358] usb 5-1: Manufacturer: Atheros Communications
- [ 1.874421] usb 5-1: SerialNumber: Alaska Day 2006
- [ 1.874932] usb 5-1: usb_probe_device
- [ 1.874936] usb 5-1: configuration #1 chosen from 1 choice
- [ 1.878138] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
- [ 1.878655] usb 5-1: adding 5-1:1.1 (config #1, interface 1)
- [ 1.878956] drivers/usb/core/inode.c: creating file '002'
- [ 1.878970] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 1.879026] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 1.879029] hub 7-0:1.0: state 7 ports 4 chg 0000 evt 0000
- [ 1.879032] hub 5-0:1.0: state 7 ports 5 chg 0000 evt 0002
- [ 1.954265] ohci_hcd 0000:00:12.0: auto-stop root hub
- [ 1.954297] ohci_hcd 0000:00:14.5: auto-stop root hub
- [ 1.954311] ohci_hcd 0000:00:16.0: auto-stop root hub
- [ 3.383981] udev[1189]: starting version 164
- [ 3.563931] Bluetooth: Generic Bluetooth USB driver ver 0.6
- [ 3.563952] btusb 5-1:1.0: usb_probe_interface
- [ 3.563954] btusb 5-1:1.0: usb_probe_interface - got id
- [ 3.563967] btusb 5-1:1.1: usb_probe_interface
- [ 3.563969] btusb 5-1:1.1: usb_probe_interface - got id
- [ 3.563983] usbcore: registered new interface driver btusb
- [ 3.575460] Bluetooth: Atheros AR30xx firmware driver ver 1.0
- [ 3.575468] ath3k 5-1:1.0: usb_probe_interface
- [ 3.575470] ath3k 5-1:1.0: usb_probe_interface - got id
- [ 3.588480] Bluetooth: Patch file not found ar3k/AthrBT_0x01020200.dfu
- [ 3.588488] Bluetooth: Loading patch file failed
- [ 3.588518] ath3k: probe of 5-1:1.0 failed with error -2
- [ 3.588530] ath3k 5-1:1.1: usb_probe_interface
- [ 3.588533] ath3k 5-1:1.1: usb_probe_interface - got id
- [ 3.588555] usbcore: registered new interface driver ath3k
- [ 3.691240] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
- [ 3.691245] Disabling lock debugging due to kernel taint
- [ 3.750574] [fglrx] Maximum main memory to use for locked dma buffers: 5258 MBytes.
- [ 3.750604] [fglrx] vendor: 1002 device: 9641 count: 1
- [ 3.751248] [fglrx] ioport: bar 1, base 0xf000, size: 0x100
- [ 3.751264] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 3.751270] pci 0000:00:01.0: setting latency timer to 64
- [ 3.751926] [fglrx] Kernel PAT support is enabled
- [ 3.751950] [fglrx] module loaded - fglrx 8.92.6 [Nov 9 2011] with 1 minors
- [ 4.958333] EXT4-fs (sda10): re-mounted. Opts: (null)
- [ 6.207737] Adding 10241400k swap on /dev/sda7. Priority:-1 extents:1 across:10241400k
- [ 7.864789] r8169 0000:02:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
- [ 7.874975] r8169 0000:02:00.0: eth0: link down
- [ 7.876065] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 46.183212] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 47.559676] wlan0: authenticate with 00:21:d8:35:e6:e0 (try 1)
- [ 47.561672] wlan0: authenticated
- [ 47.561704] wlan0: associate with 00:21:d8:35:e6:e0 (try 1)
- [ 47.564565] wlan0: RX AssocResp from 00:21:d8:35:e6:e0 (capab=0x401 status=0 aid=98)
- [ 47.564574] wlan0: associated
- [ 47.565685] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 58.274169] wlan0: no IPv6 routers present
- [ 70.363266] kjournald starting. Commit interval 5 seconds
- [ 70.363812] EXT3-fs (sda8): using internal journal
- [ 70.363819] EXT3-fs (sda8): mounted filesystem with writeback data mode
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement