Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.0.0-15-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #26-Ubuntu SMP Fri Jan 20 17:23:00 UTC 2012 (Ubuntu 3.0.0-15.26-generic 3.0.13)
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-15-generic root=UUID=a28cbdda-71e4-4398-99d6-2b8d00ebbfb8 ro quiet splash vt.handoff=7
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
- [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000ced51000 (usable)
- [ 0.000000] BIOS-e820: 00000000ced51000 - 00000000ced9c000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000ced9c000 - 00000000ceec0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ceec0000 - 00000000ceed2000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000ceed2000 - 00000000ceed4000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ceed4000 - 00000000ceed8000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000ceed8000 - 00000000cef09000 (reserved)
- [ 0.000000] BIOS-e820: 00000000cef09000 - 00000000cef0a000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000cef0a000 - 00000000cef10000 (reserved)
- [ 0.000000] BIOS-e820: 00000000cef10000 - 00000000cef12000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000cef12000 - 00000000cef15000 (reserved)
- [ 0.000000] BIOS-e820: 00000000cef15000 - 00000000cef18000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000cef18000 - 00000000cef1c000 (reserved)
- [ 0.000000] BIOS-e820: 00000000cef1c000 - 00000000cef2b000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000cef2b000 - 00000000d0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 00000001b0000000 (usable)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI 2.6 present.
- [ 0.000000] DMI: Sony Corporation VPCF13L4E/VAIO, BIOS R0190Y9 10/20/2010
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] No AGP bridge found
- [ 0.000000] last_pfn = 0x1b0000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CFFFF write-protect
- [ 0.000000] D0000-E7FFF uncachable
- [ 0.000000] E8000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 base 080000000 mask FC0000000 write-back
- [ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
- [ 0.000000] 3 base 100000000 mask F80000000 write-back
- [ 0.000000] 4 base 180000000 mask FC0000000 write-back
- [ 0.000000] 5 base 1B0000000 mask FF0000000 uncachable
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] original variable MTRRs
- [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
- [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
- [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
- [ 0.000000] reg 3, base: 4GB, range: 2GB, type WB
- [ 0.000000] reg 4, base: 6GB, range: 1GB, type WB
- [ 0.000000] reg 5, base: 6912MB, range: 256MB, type UC
- [ 0.000000] total RAM covered: 6144M
- [ 0.000000] Found optimal setting for mtrr clean up
- [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 6 lose cover RAM: 0G
- [ 0.000000] New variable MTRRs
- [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
- [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
- [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
- [ 0.000000] reg 3, base: 4GB, range: 2GB, type WB
- [ 0.000000] reg 4, base: 6GB, range: 512MB, type WB
- [ 0.000000] reg 5, base: 6656MB, range: 256MB, type WB
- [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0xced51 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [ffff8800000fc9c0] fc9c0
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000ced51000
- [ 0.000000] 0000000000 - 00cec00000 page 2M
- [ 0.000000] 00cec00000 - 00ced51000 page 4k
- [ 0.000000] kernel direct mapping tables up to ced51000 @ 1fffa000-20000000
- [ 0.000000] init_memory_mapping: 0000000100000000-00000001b0000000
- [ 0.000000] 0100000000 - 01b0000000 page 2M
- [ 0.000000] kernel direct mapping tables up to 1b0000000 @ ced49000-ced51000
- [ 0.000000] RAMDISK: 365bc000 - 372d6000
- [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 Sony)
- [ 0.000000] ACPI: XSDT 00000000cef16e18 0005C (v01 Sony VAIO 20101020 MSFT 00010013)
- [ 0.000000] ACPI: FACP 00000000cef10d98 000F4 (v04 Sony VAIO 20101020 MSFT 00010013)
- [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110413/tbfadt-369)
- [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCEF27F40/0x00000000CEF2AD40, using 32 (20110413/tbfadt-489)
- [ 0.000000] ACPI: DSDT 00000000ceec0018 0BED8 (v01 Sony VAIO 20101020 INTL 20051117)
- [ 0.000000] ACPI: FACS 00000000cef27f40 00040
- [ 0.000000] ACPI: APIC 00000000cef15f18 0008C (v02 Sony VAIO 20101020 MSFT 00010013)
- [ 0.000000] ACPI: MCFG 00000000cef29d18 0003C (v01 Sony VAIO 20101020 MSFT 00000097)
- [ 0.000000] ACPI: HPET 00000000cef29c98 00038 (v01 Sony VAIO 20101020 MSFT 00000003)
- [ 0.000000] ACPI: SLIC 00000000cef22a18 00176 (v01 Sony VAIO 20101020 Sony 01000000)
- [ 0.000000] ACPI: SSDT 00000000cef11018 009F1 (v01 Sony VAIO 20101020 INTL 20051117)
- [ 0.000000] ACPI: SSDT 00000000cef10c18 0011D (v01 Sony VAIO 20101020 INTL 20051117)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at 0000000000000000-00000001b0000000
- [ 0.000000] Initmem setup node 0 0000000000000000-00000001b0000000
- [ 0.000000] NODE_DATA [00000001afffb000 - 00000001afffffff]
- [ 0.000000] [ffffea0000000000-ffffea0005ffffff] PMD -> [ffff8801a9600000-ffff8801aebfffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal 0x00100000 -> 0x001b0000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[3] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009e
- [ 0.000000] 0: 0x00000100 -> 0x000ced51
- [ 0.000000] 0: 0x00100000 -> 0x001b0000
- [ 0.000000] On node 0 totalpages: 1567967
- [ 0.000000] DMA zone: 56 pages used for memmap
- [ 0.000000] DMA zone: 5 pages reserved
- [ 0.000000] DMA zone: 3921 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 14280 pages used for memmap
- [ 0.000000] DMA32 zone: 828809 pages, LIFO batch:31
- [ 0.000000] Normal zone: 9856 pages used for memmap
- [ 0.000000] Normal zone: 711040 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
- [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 00000000ced51000 - 00000000ced9c000
- [ 0.000000] PM: Registered nosave memory: 00000000ced9c000 - 00000000ceec0000
- [ 0.000000] PM: Registered nosave memory: 00000000ceec0000 - 00000000ceed2000
- [ 0.000000] PM: Registered nosave memory: 00000000ceed2000 - 00000000ceed4000
- [ 0.000000] PM: Registered nosave memory: 00000000ceed4000 - 00000000ceed8000
- [ 0.000000] PM: Registered nosave memory: 00000000ceed8000 - 00000000cef09000
- [ 0.000000] PM: Registered nosave memory: 00000000cef09000 - 00000000cef0a000
- [ 0.000000] PM: Registered nosave memory: 00000000cef0a000 - 00000000cef10000
- [ 0.000000] PM: Registered nosave memory: 00000000cef10000 - 00000000cef12000
- [ 0.000000] PM: Registered nosave memory: 00000000cef12000 - 00000000cef15000
- [ 0.000000] PM: Registered nosave memory: 00000000cef15000 - 00000000cef18000
- [ 0.000000] PM: Registered nosave memory: 00000000cef18000 - 00000000cef1c000
- [ 0.000000] PM: Registered nosave memory: 00000000cef1c000 - 00000000cef2b000
- [ 0.000000] PM: Registered nosave memory: 00000000cef2b000 - 00000000d0000000
- [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000f8000000
- [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
- [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
- [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
- [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed1b000
- [ 0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
- [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
- [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
- [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
- [ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
- [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
- [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
- [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:28000000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8801afc00000 s79616 r8192 d22784 u262144
- [ 0.000000] pcpu-alloc: s79616 r8192 d22784 u262144 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1543770
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-15-generic root=UUID=a28cbdda-71e4-4398-99d6-2b8d00ebbfb8 ro quiet splash vt.handoff=7
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 6087832k/7077888k available (6136k kernel code, 806020k absent, 184036k reserved, 6898k data, 988k init)
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:16640 nr_irqs:744 16
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] vt handoff: transparent VT on vt#7
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] allocated 50331648 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.004000] Detected 1728.803 MHz processor.
- [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.60 BogoMIPS (lpj=6915212)
- [ 0.000008] pid_max: default: 32768 minimum: 301
- [ 0.000035] Security Framework initialized
- [ 0.000051] AppArmor: AppArmor initialized
- [ 0.000052] Yama: becoming mindful.
- [ 0.000815] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.003075] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.004009] Mount-cache hash table entries: 256
- [ 0.004106] Initializing cgroup subsys cpuacct
- [ 0.004308] Initializing cgroup subsys memory
- [ 0.004316] Initializing cgroup subsys devices
- [ 0.004319] Initializing cgroup subsys freezer
- [ 0.004321] Initializing cgroup subsys net_cls
- [ 0.004323] Initializing cgroup subsys blkio
- [ 0.004330] Initializing cgroup subsys perf_event
- [ 0.004360] CPU: Physical Processor ID: 0
- [ 0.004362] CPU: Processor Core ID: 0
- [ 0.004367] mce: CPU supports 9 MCE banks
- [ 0.004377] CPU0: Thermal monitoring handled by SMI
- [ 0.004385] using mwait in idle threads.
- [ 0.005967] ACPI: Core revision 20110413
- [ 0.058313] ftrace: allocating 25728 entries in 101 pages
- [ 0.064882] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
- [ 0.104545] CPU0: Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz stepping 05
- [ 0.212022] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
- [ 0.212027] ... version: 3
- [ 0.212028] ... bit width: 48
- [ 0.212029] ... generic registers: 4
- [ 0.212030] ... value mask: 0000ffffffffffff
- [ 0.212031] ... max period: 000000007fffffff
- [ 0.212032] ... fixed-purpose events: 3
- [ 0.212033] ... event mask: 000000070000000f
- [ 0.212342] Booting Node 0, Processors #1
- [ 0.212344] smpboot cpu 1: start_ip = 99000
- [ 0.312006] CPU1: Thermal monitoring handled by SMI
- [ 0.332118] #2
- [ 0.332119] smpboot cpu 2: start_ip = 99000
- [ 0.419945] CPU2: Thermal monitoring handled by SMI
- [ 0.440056] #3
- [ 0.440058] smpboot cpu 3: start_ip = 99000
- [ 0.539855] CPU3: Thermal monitoring handled by SMI
- [ 0.560035] #4
- [ 0.560037] smpboot cpu 4: start_ip = 99000
- [ 0.647776] CPU4: Thermal monitoring handled by SMI
- [ 0.667955] #5
- [ 0.667958] smpboot cpu 5: start_ip = 99000
- [ 0.767683] CPU5: Thermal monitoring handled by SMI
- [ 0.787866] #6
- [ 0.787869] smpboot cpu 6: start_ip = 99000
- [ 0.875601] CPU6: Thermal monitoring handled by SMI
- [ 0.895767] #7 Ok.
- [ 0.895769] smpboot cpu 7: start_ip = 99000
- [ 0.995511] CPU7: Thermal monitoring handled by SMI
- [ 1.015618] Brought up 8 CPUs
- [ 1.015621] Total of 8 processors activated (27655.78 BogoMIPS).
- [ 1.020307] devtmpfs: initialized
- [ 1.020452] PM: Registering ACPI NVS region at ced51000 (307200 bytes)
- [ 1.020461] PM: Registering ACPI NVS region at ceec0000 (73728 bytes)
- [ 1.020464] PM: Registering ACPI NVS region at ceed4000 (16384 bytes)
- [ 1.020466] PM: Registering ACPI NVS region at cef09000 (4096 bytes)
- [ 1.020468] PM: Registering ACPI NVS region at cef10000 (8192 bytes)
- [ 1.020470] PM: Registering ACPI NVS region at cef1c000 (61440 bytes)
- [ 1.022281] print_constraints: dummy:
- [ 1.022308] Time: 21:15:00 Date: 01/26/12
- [ 1.022343] NET: Registered protocol family 16
- [ 1.022445] Trying to unpack rootfs image as initramfs...
- [ 1.022461] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 1.022464] ACPI: bus type pci registered
- [ 1.022535] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 1.022539] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
- [ 1.036781] PCI: Using configuration type 1 for base access
- [ 1.037591] bio: create slab <bio-0> at 0
- [ 1.039775] ACPI: EC: Look up EC in DSDT
- [ 1.041745] ACPI: Executed 1 blocks of module-level executable AML code
- [ 1.063481] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 1.064248] ACPI: SSDT 00000000cef14a98 0032A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
- [ 1.064752] ACPI: Dynamic OEM Table Load:
- [ 1.064756] ACPI: SSDT (null) 0032A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
- [ 1.064920] ACPI: SSDT 00000000cef13018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 1.065399] ACPI: Dynamic OEM Table Load:
- [ 1.065402] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 1.131700] ACPI: SSDT 00000000cef14718 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
- [ 1.132264] ACPI: Dynamic OEM Table Load:
- [ 1.132267] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
- [ 1.163510] ACPI: SSDT 00000000cef12d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
- [ 1.164027] ACPI: Dynamic OEM Table Load:
- [ 1.164030] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
- [ 1.331629] Freeing initrd memory: 13416k freed
- [ 1.983678] ACPI: Interpreter enabled
- [ 1.983684] ACPI: (supports S0 S3 S4 S5)
- [ 1.983712] ACPI: Using IOAPIC for interrupt routing
- [ 2.020610] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
- [ 2.020887] ACPI: No dock devices found.
- [ 2.020889] HEST: Table not found.
- [ 2.020892] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 2.021290] \_SB_.PCI0:_OSC invalid UUID
- [ 2.021292] _OSC request data:1 8 1f
- [ 2.021297] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
- [ 2.021919] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
- [ 2.021922] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
- [ 2.021925] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 2.021928] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
- [ 2.021930] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
- [ 2.021933] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
- [ 2.021936] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
- [ 2.021938] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
- [ 2.021941] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
- [ 2.021944] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfeafffff]
- [ 2.021959] pci 0000:00:00.0: [8086:d132] type 0 class 0x000600
- [ 2.022011] pci 0000:00:03.0: [8086:d138] type 1 class 0x000604
- [ 2.022056] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
- [ 2.022059] pci 0000:00:03.0: PME# disabled
- [ 2.022080] pci 0000:00:08.0: [8086:d155] type 0 class 0x000880
- [ 2.022138] pci 0000:00:08.1: [8086:d156] type 0 class 0x000880
- [ 2.022195] pci 0000:00:08.2: [8086:d157] type 0 class 0x000880
- [ 2.022251] pci 0000:00:08.3: [8086:d158] type 0 class 0x000880
- [ 2.022306] pci 0000:00:10.0: [8086:d150] type 0 class 0x000880
- [ 2.022354] pci 0000:00:10.1: [8086:d151] type 0 class 0x000880
- [ 2.022427] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
- [ 2.022449] pci 0000:00:1a.0: reg 10: [mem 0xea208000-0xea2083ff]
- [ 2.022524] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 2.022529] pci 0000:00:1a.0: PME# disabled
- [ 2.022552] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
- [ 2.022568] pci 0000:00:1b.0: reg 10: [mem 0xea200000-0xea203fff 64bit]
- [ 2.022624] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 2.022628] pci 0000:00:1b.0: PME# disabled
- [ 2.022648] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
- [ 2.022705] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 2.022709] pci 0000:00:1c.0: PME# disabled
- [ 2.022730] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
- [ 2.022787] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 2.022791] pci 0000:00:1c.1: PME# disabled
- [ 2.022811] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
- [ 2.022868] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 2.022872] pci 0000:00:1c.2: PME# disabled
- [ 2.022895] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
- [ 2.022951] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 2.022955] pci 0000:00:1c.5: PME# disabled
- [ 2.022976] pci 0000:00:1c.6: [8086:3b4e] type 1 class 0x000604
- [ 2.023033] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
- [ 2.023037] pci 0000:00:1c.6: PME# disabled
- [ 2.023064] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
- [ 2.023086] pci 0000:00:1d.0: reg 10: [mem 0xea207000-0xea2073ff]
- [ 2.023161] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 2.023166] pci 0000:00:1d.0: PME# disabled
- [ 2.023187] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
- [ 2.023245] pci 0000:00:1f.0: [8086:3b03] type 0 class 0x000601
- [ 2.023362] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
- [ 2.023382] pci 0000:00:1f.2: reg 10: [io 0xe070-0xe077]
- [ 2.023390] pci 0000:00:1f.2: reg 14: [io 0xe060-0xe063]
- [ 2.023399] pci 0000:00:1f.2: reg 18: [io 0xe050-0xe057]
- [ 2.023407] pci 0000:00:1f.2: reg 1c: [io 0xe040-0xe043]
- [ 2.023415] pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
- [ 2.023424] pci 0000:00:1f.2: reg 24: [mem 0xea206000-0xea2067ff]
- [ 2.023459] pci 0000:00:1f.2: PME# supported from D3hot
- [ 2.023462] pci 0000:00:1f.2: PME# disabled
- [ 2.023479] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
- [ 2.023495] pci 0000:00:1f.3: reg 10: [mem 0xea205000-0xea2050ff 64bit]
- [ 2.023517] pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
- [ 2.023591] pci 0000:01:00.0: [10de:0df0] type 0 class 0x000300
- [ 2.023602] pci 0000:01:00.0: reg 10: [mem 0xe2000000-0xe2ffffff]
- [ 2.023613] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 2.023625] pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
- [ 2.023633] pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
- [ 2.023641] pci 0000:01:00.0: reg 30: [mem 0xe3000000-0xe307ffff pref]
- [ 2.023683] pci 0000:01:00.1: [10de:0bea] type 0 class 0x000403
- [ 2.023694] pci 0000:01:00.1: reg 10: [mem 0xe3080000-0xe3083fff]
- [ 2.023764] pci 0000:00:03.0: PCI bridge to [bus 01-01]
- [ 2.023768] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
- [ 2.023772] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xe30fffff]
- [ 2.023777] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 2.023836] pci 0000:02:00.0: [168c:002e] type 0 class 0x000280
- [ 2.023860] pci 0000:02:00.0: reg 10: [mem 0xe8e00000-0xe8e0ffff 64bit]
- [ 2.023947] pci 0000:02:00.0: supports D1
- [ 2.023949] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
- [ 2.023954] pci 0000:02:00.0: PME# disabled
- [ 2.023985] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
- [ 2.023989] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
- [ 2.023993] pci 0000:00:1c.0: bridge window [mem 0xe8e00000-0xea1fffff]
- [ 2.023999] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 2.024090] pci 0000:03:00.0: [1180:e822] type 0 class 0x000805
- [ 2.024109] pci 0000:03:00.0: reg 10: [mem 0xe7a03000-0xe7a030ff]
- [ 2.024219] pci 0000:03:00.0: supports D1 D2
- [ 2.024221] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 2.024226] pci 0000:03:00.0: PME# disabled
- [ 2.024269] pci 0000:03:00.1: [1180:e230] type 0 class 0x000880
- [ 2.024288] pci 0000:03:00.1: reg 10: [mem 0xe7a02000-0xe7a020ff]
- [ 2.024398] pci 0000:03:00.1: supports D1 D2
- [ 2.024400] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 2.024405] pci 0000:03:00.1: PME# disabled
- [ 2.024444] pci 0000:03:00.3: [1180:e832] type 0 class 0x000c00
- [ 2.024463] pci 0000:03:00.3: reg 10: [mem 0xe7a01000-0xe7a017ff]
- [ 2.024572] pci 0000:03:00.3: supports D1 D2
- [ 2.024574] pci 0000:03:00.3: PME# supported from D0 D1 D2 D3hot D3cold
- [ 2.024580] pci 0000:03:00.3: PME# disabled
- [ 2.024616] pci 0000:03:00.4: [1180:e822] type 0 class 0x000805
- [ 2.024635] pci 0000:03:00.4: reg 10: [mem 0xe7a00000-0xe7a000ff]
- [ 2.024745] pci 0000:03:00.4: supports D1 D2
- [ 2.024747] pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold
- [ 2.024752] pci 0000:03:00.4: PME# disabled
- [ 2.024816] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
- [ 2.024820] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
- [ 2.024824] pci 0000:00:1c.1: bridge window [mem 0xe7a00000-0xe8dfffff]
- [ 2.024830] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 2.024958] pci 0000:04:00.0: [11ab:4380] type 0 class 0x000200
- [ 2.025065] pci 0000:04:00.0: reg 10: [mem 0xe6620000-0xe6623fff 64bit]
- [ 2.025130] pci 0000:04:00.0: reg 18: [io 0xa000-0xa0ff]
- [ 2.025381] pci 0000:04:00.0: reg 30: [mem 0xe6600000-0xe661ffff pref]
- [ 2.025536] pci 0000:04:00.0: supports D1 D2
- [ 2.025539] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 2.025562] pci 0000:04:00.0: PME# disabled
- [ 2.025695] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
- [ 2.025699] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
- [ 2.025703] pci 0000:00:1c.2: bridge window [mem 0xe6600000-0xe79fffff]
- [ 2.025709] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 2.025775] pci 0000:05:00.0: [1033:0194] type 0 class 0x000c03
- [ 2.025803] pci 0000:05:00.0: reg 10: [mem 0xe5200000-0xe5201fff 64bit]
- [ 2.025915] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
- [ 2.025920] pci 0000:05:00.0: PME# disabled
- [ 2.025963] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
- [ 2.025968] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
- [ 2.025972] pci 0000:00:1c.5: bridge window [mem 0xe5200000-0xe65fffff]
- [ 2.025978] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 2.026019] pci 0000:00:1c.6: PCI bridge to [bus 06-0d]
- [ 2.026023] pci 0000:00:1c.6: bridge window [io 0x8000-0x8fff]
- [ 2.026027] pci 0000:00:1c.6: bridge window [mem 0xe3200000-0xe51fffff]
- [ 2.026034] pci 0000:00:1c.6: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 2.026101] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
- [ 2.026105] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
- [ 2.026110] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- [ 2.026116] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 2.026119] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 2.026122] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 2.026125] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 2.026127] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
- [ 2.026130] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
- [ 2.026133] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
- [ 2.026136] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
- [ 2.026138] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
- [ 2.026141] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
- [ 2.026144] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
- [ 2.026175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 2.026335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
- [ 2.026396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
- [ 2.026465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
- [ 2.026553] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
- [ 2.026613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
- [ 2.026651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT]
- [ 2.026808] \_SB_.PCI0:_OSC invalid UUID
- [ 2.026810] _OSC request data:1 1f 1f
- [ 2.026815] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 2.026854] \_SB_.PCI0:_OSC invalid UUID
- [ 2.026855] _OSC request data:1 0 1d
- [ 2.026859] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
- [ 2.026861] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 2.033496] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
- [ 2.033569] pci 0000:3f:00.0: [8086:2c52] type 0 class 0x000600
- [ 2.033592] pci 0000:3f:00.1: [8086:2c81] type 0 class 0x000600
- [ 2.033615] pci 0000:3f:02.0: [8086:2c90] type 0 class 0x000600
- [ 2.033638] pci 0000:3f:02.1: [8086:2c91] type 0 class 0x000600
- [ 2.033660] pci 0000:3f:03.0: [8086:2c98] type 0 class 0x000600
- [ 2.033680] pci 0000:3f:03.1: [8086:2c99] type 0 class 0x000600
- [ 2.033701] pci 0000:3f:03.4: [8086:2c9c] type 0 class 0x000600
- [ 2.033722] pci 0000:3f:04.0: [8086:2ca0] type 0 class 0x000600
- [ 2.033742] pci 0000:3f:04.1: [8086:2ca1] type 0 class 0x000600
- [ 2.033762] pci 0000:3f:04.2: [8086:2ca2] type 0 class 0x000600
- [ 2.033782] pci 0000:3f:04.3: [8086:2ca3] type 0 class 0x000600
- [ 2.033806] pci 0000:3f:05.0: [8086:2ca8] type 0 class 0x000600
- [ 2.033826] pci 0000:3f:05.1: [8086:2ca9] type 0 class 0x000600
- [ 2.033846] pci 0000:3f:05.2: [8086:2caa] type 0 class 0x000600
- [ 2.033866] pci 0000:3f:05.3: [8086:2cab] type 0 class 0x000600
- [ 2.033905] pci0000:3f: Requesting ACPI _OSC control (0x1d)
- [ 2.033908] pci0000:3f: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
- [ 2.033910] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 2.034437] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
- [ 2.034489] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
- [ 2.034539] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 7 10 12 14 15)
- [ 2.034588] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
- [ 2.034636] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 2.034686] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 2.034738] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
- [ 2.034787] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
- [ 2.034897] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 2.035018] vgaarb: loaded
- [ 2.035019] vgaarb: bridge control possible 0000:01:00.0
- [ 2.035206] SCSI subsystem initialized
- [ 2.035259] libata version 3.00 loaded.
- [ 2.035300] usbcore: registered new interface driver usbfs
- [ 2.035310] usbcore: registered new interface driver hub
- [ 2.035332] usbcore: registered new device driver usb
- [ 2.035411] PCI: Using ACPI for IRQ routing
- [ 2.036873] PCI: pci_cache_line_size set to 64 bytes
- [ 2.036995] reserve RAM buffer: 000000000009e800 - 000000000009ffff
- [ 2.036998] reserve RAM buffer: 00000000ced51000 - 00000000cfffffff
- [ 2.037094] NetLabel: Initializing
- [ 2.037096] NetLabel: domain hash size = 128
- [ 2.037098] NetLabel: protocols = UNLABELED CIPSOv4
- [ 2.037109] NetLabel: unlabeled traffic allowed by default
- [ 2.037170] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
- [ 2.037178] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
- [ 2.037185] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 2.039471] hpet: hpet2 irq 40 for MSI
- [ 2.039545] hpet: hpet3 irq 41 for MSI
- [ 2.043585] hpet: hpet4 irq 42 for MSI
- [ 2.047641] hpet: hpet5 irq 43 for MSI
- [ 2.051639] hpet: hpet6 irq 44 for MSI
- [ 2.063663] Switching to clocksource hpet
- [ 2.066742] Switched to NOHz mode on CPU #0
- [ 2.066801] Switched to NOHz mode on CPU #1
- [ 2.066959] Switched to NOHz mode on CPU #2
- [ 2.067113] Switched to NOHz mode on CPU #3
- [ 2.067216] Switched to NOHz mode on CPU #4
- [ 2.067568] Switched to NOHz mode on CPU #6
- [ 2.067584] Switched to NOHz mode on CPU #5
- [ 2.067589] Switched to NOHz mode on CPU #7
- [ 2.069829] AppArmor: AppArmor Filesystem Enabled
- [ 2.069850] pnp: PnP ACPI init
- [ 2.069864] ACPI: bus type pnp registered
- [ 2.070196] pnp 00:00: [bus 00-3e]
- [ 2.070199] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 2.070202] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 2.070204] pnp 00:00: [io 0x0d00-0xffff window]
- [ 2.070206] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 2.070209] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
- [ 2.070211] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
- [ 2.070213] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
- [ 2.070215] pnp 00:00: [mem 0x000cc000-0x000cffff window]
- [ 2.070218] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
- [ 2.070220] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
- [ 2.070222] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
- [ 2.070224] pnp 00:00: [mem 0x000dc000-0x000dffff window]
- [ 2.070227] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
- [ 2.070229] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
- [ 2.070231] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
- [ 2.070233] pnp 00:00: [mem 0x000ec000-0x000effff window]
- [ 2.070236] pnp 00:00: [mem 0x000f0000-0x000fffff window]
- [ 2.070238] pnp 00:00: [mem 0xd0000000-0xfeafffff window]
- [ 2.070313] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 2.070328] pnp 00:01: [io 0x0000-0x001f]
- [ 2.070330] pnp 00:01: [io 0x0081-0x0091]
- [ 2.070332] pnp 00:01: [io 0x0093-0x009f]
- [ 2.070334] pnp 00:01: [io 0x00c0-0x00df]
- [ 2.070336] pnp 00:01: [dma 4]
- [ 2.070357] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 2.070366] pnp 00:02: [mem 0xff000000-0xffffffff]
- [ 2.070390] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
- [ 2.070469] pnp 00:03: [mem 0xfed00000-0xfed003ff]
- [ 2.070493] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 2.070504] pnp 00:04: [io 0x00f0]
- [ 2.070515] pnp 00:04: [irq 13]
- [ 2.070537] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 2.070549] pnp 00:05: [io 0x002e-0x002f]
- [ 2.070551] pnp 00:05: [io 0x004e-0x004f]
- [ 2.070553] pnp 00:05: [io 0x0061]
- [ 2.070555] pnp 00:05: [io 0x0063]
- [ 2.070557] pnp 00:05: [io 0x0065]
- [ 2.070559] pnp 00:05: [io 0x0067]
- [ 2.070560] pnp 00:05: [io 0x0070]
- [ 2.070562] pnp 00:05: [io 0x0080]
- [ 2.070564] pnp 00:05: [io 0x0092]
- [ 2.070566] pnp 00:05: [io 0x00b2-0x00b3]
- [ 2.070568] pnp 00:05: [io 0x0680-0x069f]
- [ 2.070570] pnp 00:05: [io 0xff00-0xff0f]
- [ 2.070572] pnp 00:05: [io 0xff10-0xff13]
- [ 2.070573] pnp 00:05: [io 0x0800-0x0803]
- [ 2.070575] pnp 00:05: [io 0x0400-0x047f]
- [ 2.070577] pnp 00:05: [io 0x0500-0x057f]
- [ 2.070579] pnp 00:05: [io 0x164e-0x164f]
- [ 2.070646] system 00:05: [io 0x0680-0x069f] has been reserved
- [ 2.070649] system 00:05: [io 0xff00-0xff0f] has been reserved
- [ 2.070651] system 00:05: [io 0xff10-0xff13] has been reserved
- [ 2.070654] system 00:05: [io 0x0800-0x0803] has been reserved
- [ 2.070657] system 00:05: [io 0x0400-0x047f] has been reserved
- [ 2.070659] system 00:05: [io 0x0500-0x057f] has been reserved
- [ 2.070662] system 00:05: [io 0x164e-0x164f] has been reserved
- [ 2.070666] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 2.070676] pnp 00:06: [io 0x0070-0x0077]
- [ 2.070682] pnp 00:06: [irq 8]
- [ 2.070705] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 2.070717] pnp 00:07: [io 0x0060]
- [ 2.070718] pnp 00:07: [io 0x0064]
- [ 2.070723] pnp 00:07: [irq 1]
- [ 2.070747] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 2.070760] pnp 00:08: [irq 12]
- [ 2.070813] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
- [ 2.071218] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
- [ 2.071221] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 2.071223] pnp 00:09: [mem 0xfed1b000-0xfed1bfff]
- [ 2.071225] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 2.071228] pnp 00:09: [mem 0xf8000000-0xfbffffff]
- [ 2.071230] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
- [ 2.071232] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
- [ 2.071234] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
- [ 2.071236] pnp 00:09: [mem 0xff000000-0xffffffff]
- [ 2.071238] pnp 00:09: [mem 0xfee00000-0xfeefffff]
- [ 2.071240] pnp 00:09: [mem 0xea20b000-0xea20bfff]
- [ 2.071324] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 2.071328] system 00:09: [mem 0xfed1b000-0xfed1bfff] has been reserved
- [ 2.071331] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
- [ 2.071334] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 2.071336] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 2.071339] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
- [ 2.071342] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 2.071345] system 00:09: [mem 0xea20b000-0xea20bfff] has been reserved
- [ 2.071349] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 2.071505] pnp 00:0a: [bus 3f]
- [ 2.071574] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
- [ 2.088792] pnp: PnP ACPI: found 11 devices
- [ 2.088794] ACPI: ACPI bus type pnp unregistered
- [ 2.094712] PCI: max bus depth: 1 pci_try_num: 2
- [ 2.094769] pci 0000:00:1c.6: BAR 15: assigned [mem 0xea300000-0xea4fffff 64bit pref]
- [ 2.094775] pci 0000:00:1c.5: BAR 15: assigned [mem 0xea500000-0xea6fffff 64bit pref]
- [ 2.094781] pci 0000:00:1c.2: BAR 15: assigned [mem 0xea700000-0xea8fffff 64bit pref]
- [ 2.094787] pci 0000:00:1c.1: BAR 15: assigned [mem 0xea900000-0xeaafffff 64bit pref]
- [ 2.094793] pci 0000:00:1c.0: BAR 15: assigned [mem 0xeab00000-0xeacfffff 64bit pref]
- [ 2.094797] pci 0000:00:03.0: PCI bridge to [bus 01-01]
- [ 2.094800] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
- [ 2.094805] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xe30fffff]
- [ 2.094808] pci 0000:00:03.0: bridge window [mem pref disabled]
- [ 2.094813] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
- [ 2.094816] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
- [ 2.094821] pci 0000:00:1c.0: bridge window [mem 0xe8e00000-0xea1fffff]
- [ 2.094826] pci 0000:00:1c.0: bridge window [mem 0xeab00000-0xeacfffff 64bit pref]
- [ 2.094832] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
- [ 2.094835] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
- [ 2.094841] pci 0000:00:1c.1: bridge window [mem 0xe7a00000-0xe8dfffff]
- [ 2.094845] pci 0000:00:1c.1: bridge window [mem 0xea900000-0xeaafffff 64bit pref]
- [ 2.094851] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
- [ 2.094854] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
- [ 2.094859] pci 0000:00:1c.2: bridge window [mem 0xe6600000-0xe79fffff]
- [ 2.094864] pci 0000:00:1c.2: bridge window [mem 0xea700000-0xea8fffff 64bit pref]
- [ 2.094870] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
- [ 2.094873] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
- [ 2.094878] pci 0000:00:1c.5: bridge window [mem 0xe5200000-0xe65fffff]
- [ 2.094882] pci 0000:00:1c.5: bridge window [mem 0xea500000-0xea6fffff 64bit pref]
- [ 2.094888] pci 0000:00:1c.6: PCI bridge to [bus 06-0d]
- [ 2.094891] pci 0000:00:1c.6: bridge window [io 0x8000-0x8fff]
- [ 2.094897] pci 0000:00:1c.6: bridge window [mem 0xe3200000-0xe51fffff]
- [ 2.094901] pci 0000:00:1c.6: bridge window [mem 0xea300000-0xea4fffff 64bit pref]
- [ 2.094907] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
- [ 2.094909] pci 0000:00:1e.0: bridge window [io disabled]
- [ 2.094914] pci 0000:00:1e.0: bridge window [mem disabled]
- [ 2.094918] pci 0000:00:1e.0: bridge window [mem pref disabled]
- [ 2.094937] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 2.094941] pci 0000:00:03.0: setting latency timer to 64
- [ 2.094947] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 2.094951] pci 0000:00:1c.0: setting latency timer to 64
- [ 2.094962] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 2.094966] pci 0000:00:1c.1: setting latency timer to 64
- [ 2.094976] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 2.094980] pci 0000:00:1c.2: setting latency timer to 64
- [ 2.094986] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 2.094990] pci 0000:00:1c.5: setting latency timer to 64
- [ 2.094996] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 2.095000] pci 0000:00:1c.6: setting latency timer to 64
- [ 2.095006] pci 0000:00:1e.0: setting latency timer to 64
- [ 2.095010] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 2.095013] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 2.095015] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 2.095018] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
- [ 2.095020] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
- [ 2.095022] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
- [ 2.095025] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
- [ 2.095027] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
- [ 2.095030] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
- [ 2.095032] pci_bus 0000:00: resource 13 [mem 0xd0000000-0xfeafffff]
- [ 2.095035] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
- [ 2.095037] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xe30fffff]
- [ 2.095040] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
- [ 2.095042] pci_bus 0000:02: resource 1 [mem 0xe8e00000-0xea1fffff]
- [ 2.095045] pci_bus 0000:02: resource 2 [mem 0xeab00000-0xeacfffff 64bit pref]
- [ 2.095047] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
- [ 2.095050] pci_bus 0000:03: resource 1 [mem 0xe7a00000-0xe8dfffff]
- [ 2.095052] pci_bus 0000:03: resource 2 [mem 0xea900000-0xeaafffff 64bit pref]
- [ 2.095055] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
- [ 2.095057] pci_bus 0000:04: resource 1 [mem 0xe6600000-0xe79fffff]
- [ 2.095060] pci_bus 0000:04: resource 2 [mem 0xea700000-0xea8fffff 64bit pref]
- [ 2.095062] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
- [ 2.095065] pci_bus 0000:05: resource 1 [mem 0xe5200000-0xe65fffff]
- [ 2.095067] pci_bus 0000:05: resource 2 [mem 0xea500000-0xea6fffff 64bit pref]
- [ 2.095070] pci_bus 0000:06: resource 0 [io 0x8000-0x8fff]
- [ 2.095072] pci_bus 0000:06: resource 1 [mem 0xe3200000-0xe51fffff]
- [ 2.095074] pci_bus 0000:06: resource 2 [mem 0xea300000-0xea4fffff 64bit pref]
- [ 2.095077] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7]
- [ 2.095080] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff]
- [ 2.095082] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
- [ 2.095084] pci_bus 0000:0e: resource 7 [mem 0x000d0000-0x000d3fff]
- [ 2.095087] pci_bus 0000:0e: resource 8 [mem 0x000d4000-0x000d7fff]
- [ 2.095089] pci_bus 0000:0e: resource 9 [mem 0x000d8000-0x000dbfff]
- [ 2.095091] pci_bus 0000:0e: resource 10 [mem 0x000dc000-0x000dffff]
- [ 2.095094] pci_bus 0000:0e: resource 11 [mem 0x000e0000-0x000e3fff]
- [ 2.095096] pci_bus 0000:0e: resource 12 [mem 0x000e4000-0x000e7fff]
- [ 2.095099] pci_bus 0000:0e: resource 13 [mem 0xd0000000-0xfeafffff]
- [ 2.095135] NET: Registered protocol family 2
- [ 2.095388] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 2.096542] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- [ 2.099973] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 2.100372] TCP: Hash tables configured (established 524288 bind 65536)
- [ 2.100375] TCP reno registered
- [ 2.100392] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 2.100478] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 2.100656] NET: Registered protocol family 1
- [ 2.227561] pci 0000:01:00.0: Boot video device
- [ 2.227652] PCI: CLS 64 bytes, default 64
- [ 2.227654] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 2.227657] Placing 64MB software IO TLB between ffff8800cad49000 - ffff8800ced49000
- [ 2.227659] software IO TLB at phys 0xcad49000 - 0xced49000
- [ 2.228286] audit: initializing netlink socket (disabled)
- [ 2.228294] type=2000 audit(1327612500.948:1): initialized
- [ 2.265108] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 2.284845] VFS: Disk quotas dquot_6.5.2
- [ 2.284908] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 2.285575] fuse init (API version 7.16)
- [ 2.285668] msgmni has been set to 11916
- [ 2.286031] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 2.286060] io scheduler noop registered
- [ 2.286062] io scheduler deadline registered
- [ 2.286106] io scheduler cfq registered (default)
- [ 2.286475] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 2.286499] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 2.286544] intel_idle: MWAIT substates: 0x1120
- [ 2.286557] intel_idle: v0.4 model 0x1E
- [ 2.286558] intel_idle: lapic_timer_reliable_states 0x2
- [ 2.292014] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- [ 2.300104] ACPI: AC Adapter [ADP1] (on-line)
- [ 2.300223] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
- [ 2.312080] ACPI: Lid Switch [LID0]
- [ 2.312124] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
- [ 2.312129] ACPI: Power Button [PWRB]
- [ 2.312155] ACPI: acpi_idle yielding to intel_idle
- [ 2.344181] thermal LNXTHERM:00: registered as thermal_zone0
- [ 2.344187] ACPI: Thermal Zone [TZ00] (57 C)
- [ 2.360517] thermal LNXTHERM:01: registered as thermal_zone1
- [ 2.360520] ACPI: Thermal Zone [TZ01] (57 C)
- [ 2.360548] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- [ 2.360562] ERST: Table is not found!
- [ 2.360611] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 2.424206] ACPI: Battery Slot [BAT0] (battery present)
- [ 2.476062] Linux agpgart interface v0.103
- [ 2.477132] brd: module loaded
- [ 2.477634] loop: module loaded
- [ 2.478021] Fixed MDIO Bus: probed
- [ 2.478042] PPP generic driver version 2.4.2
- [ 2.478076] tun: Universal TUN/TAP device driver, 1.6
- [ 2.478078] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 2.478145] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.478162] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 2.478184] ehci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 2.478188] ehci_hcd 0000:00:1a.0: EHCI Host Controller
- [ 2.478223] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 2.478254] ehci_hcd 0000:00:1a.0: debug port 2
- [ 2.482132] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
- [ 2.482151] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xea208000
- [ 2.495400] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 2.495541] hub 1-0:1.0: USB hub found
- [ 2.495546] hub 1-0:1.0: 2 ports detected
- [ 2.495616] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 2.495630] ehci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 2.495633] ehci_hcd 0000:00:1d.0: EHCI Host Controller
- [ 2.495672] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 2.495697] ehci_hcd 0000:00:1d.0: debug port 2
- [ 2.499580] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
- [ 2.499595] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xea207000
- [ 2.515390] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 2.515526] hub 2-0:1.0: USB hub found
- [ 2.515531] hub 2-0:1.0: 2 ports detected
- [ 2.515595] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.515608] uhci_hcd: USB Universal Host Controller Interface driver
- [ 2.515663] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 2.520746] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 2.520753] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 2.520851] mousedev: PS/2 mouse device common for all mice
- [ 2.520954] rtc_cmos 00:06: RTC can wake from S4
- [ 2.521050] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
- [ 2.521076] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
- [ 2.521184] device-mapper: uevent: version 1.0.3
- [ 2.521256] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- [ 2.521439] cpuidle: using governor ladder
- [ 2.521740] cpuidle: using governor menu
- [ 2.521742] EFI Variables Facility v0.08 2004-May-17
- [ 2.521991] TCP cubic registered
- [ 2.522117] NET: Registered protocol family 10
- [ 2.522628] NET: Registered protocol family 17
- [ 2.522644] Registering the dns_resolver key type
- [ 2.522730] PM: Hibernation image not present or could not be loaded.
- [ 2.522738] registered taskstats version 1
- [ 2.545684] Magic number: 12:869:298
- [ 2.545893] rtc_cmos 00:06: setting system clock to 2012-01-26 21:15:02 UTC (1327612502)
- [ 2.546555] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
- [ 2.548629] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 2.548630] EDD information not available.
- [ 2.550129] Freeing unused kernel memory: 988k freed
- [ 2.550251] Write protecting the kernel read-only data: 12288k
- [ 2.555917] Freeing unused kernel memory: 2036k freed
- [ 2.559894] Freeing unused kernel memory: 1388k freed
- [ 2.577784] udevd[104]: starting version 173
- [ 2.620570] sdhci: Secure Digital Host Controller Interface driver
- [ 2.620574] sdhci: Copyright(c) Pierre Ossman
- [ 2.620960] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 0)
- [ 2.620982] sdhci-pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 2.621016] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 2.621025] sdhci-pci 0000:03:00.0: setting latency timer to 64
- [ 2.621054] mmc0: no vmmc regulator found
- [ 2.621090] Registered led device: mmc0::
- [ 2.621141] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
- [ 2.621157] sdhci-pci 0000:03:00.4: SDHCI controller found [1180:e822] (rev 0)
- [ 2.621182] sdhci-pci 0000:03:00.4: PCI INT C -> GSI 19 (level, low) -> IRQ 19
- [ 2.621208] sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 2.621216] sdhci-pci 0000:03:00.4: setting latency timer to 64
- [ 2.621237] mmc1: no vmmc regulator found
- [ 2.621270] Registered led device: mmc1::
- [ 2.621313] mmc1: SDHCI controller on PCI [0000:03:00.4] using DMA
- [ 2.621361] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 2.621390] xhci_hcd 0000:05:00.0: setting latency timer to 64
- [ 2.621395] xhci_hcd 0000:05:00.0: xHCI Host Controller
- [ 2.621462] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
- [ 2.621631] xhci_hcd 0000:05:00.0: irq 17, io mem 0xe5200000
- [ 2.621714] xhci_hcd 0000:05:00.0: irq 45 for MSI/MSI-X
- [ 2.621721] xhci_hcd 0000:05:00.0: irq 46 for MSI/MSI-X
- [ 2.621730] xhci_hcd 0000:05:00.0: irq 47 for MSI/MSI-X
- [ 2.621737] xhci_hcd 0000:05:00.0: irq 48 for MSI/MSI-X
- [ 2.621745] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
- [ 2.621752] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
- [ 2.621760] xhci_hcd 0000:05:00.0: irq 51 for MSI/MSI-X
- [ 2.621768] xhci_hcd 0000:05:00.0: irq 52 for MSI/MSI-X
- [ 2.622040] xHCI xhci_add_endpoint called for root hub
- [ 2.622043] xHCI xhci_check_bandwidth called for root hub
- [ 2.622085] hub 3-0:1.0: USB hub found
- [ 2.622096] hub 3-0:1.0: 2 ports detected
- [ 2.622200] xhci_hcd 0000:05:00.0: xHCI Host Controller
- [ 2.622256] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
- [ 2.623025] sky2: driver version 1.28
- [ 2.623054] ahci 0000:00:1f.2: version 3.0
- [ 2.623058] sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 2.623074] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 2.623077] sky2 0000:04:00.0: setting latency timer to 64
- [ 2.623114] sky2 0000:04:00.0: Yukon-2 UL 2 chip revision 0
- [ 2.623152] ahci 0000:00:1f.2: irq 53 for MSI/MSI-X
- [ 2.623209] ahci: SSS flag set, parallel bus scan disabled
- [ 2.623250] sky2 0000:04:00.0: irq 54 for MSI/MSI-X
- [ 2.623266] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl SATA mode
- [ 2.623270] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part sxs apst
- [ 2.623279] ahci 0000:00:1f.2: setting latency timer to 64
- [ 2.623397] firewire_ohci 0000:03:00.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
- [ 2.623409] firewire_ohci 0000:03:00.3: setting latency timer to 64
- [ 2.624165] sky2 0000:04:00.0: eth0: addr 78:84:3c:02:9a:76
- [ 2.625104] xHCI xhci_add_endpoint called for root hub
- [ 2.625108] xHCI xhci_check_bandwidth called for root hub
- [ 2.625152] hub 4-0:1.0: USB hub found
- [ 2.625166] hub 4-0:1.0: 2 ports detected
- [ 2.625902] scsi0 : ahci
- [ 2.627816] scsi1 : ahci
- [ 2.629216] scsi2 : ahci
- [ 2.629726] scsi3 : ahci
- [ 2.629909] scsi4 : ahci
- [ 2.630268] scsi5 : ahci
- [ 2.630457] ata1: SATA max UDMA/133 abar m2048@0xea206000 port 0xea206100 irq 53
- [ 2.630461] ata2: SATA max UDMA/133 abar m2048@0xea206000 port 0xea206180 irq 53
- [ 2.630463] ata3: DUMMY
- [ 2.630464] ata4: DUMMY
- [ 2.630466] ata5: DUMMY
- [ 2.630468] ata6: SATA max UDMA/133 abar m2048@0xea206000 port 0xea206380 irq 53
- [ 2.679719] firewire_ohci 0000:03:00.3: irq 55 for MSI/MSI-X
- [ 2.679785] firewire_ohci: Added fw-ohci device 0000:03:00.3, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
- [ 2.807448] usb 1-1: new high speed USB device number 2 using ehci_hcd
- [ 2.940253] hub 1-1:1.0: USB hub found
- [ 2.940412] hub 1-1:1.0: 6 ports detected
- [ 2.947497] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.948616] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 2.989103] ata1.00: ATA-8: TOSHIBA MK6461GSY, MC000H, max UDMA/100
- [ 2.989111] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 2.990442] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 2.990856] ata1.00: configured for UDMA/100
- [ 2.991086] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6461GS MC00 PQ: 0 ANSI: 5
- [ 2.991257] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 2.991291] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
- [ 2.991361] sd 0:0:0:0: [sda] Write Protect is off
- [ 2.991366] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.991391] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.051323] usb 2-1: new high speed USB device number 2 using ehci_hcd
- [ 3.095353] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
- [ 3.095719] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 3.179369] firewire_core: created device fw0: GUID 08004603035126ed, S400
- [ 3.184091] hub 2-1:1.0: USB hub found
- [ 3.184322] hub 2-1:1.0: 8 ports detected
- [ 3.227287] Refined TSC clocksource calibration: 1728.999 MHz.
- [ 3.227296] Switching to clocksource tsc
- [ 3.295352] usb 3-1: new high speed USB device number 2 using xhci_hcd
- [ 3.314637] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.315185] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.315346] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 3.316222] hub 3-1:1.0: USB hub found
- [ 3.316759] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.316800] hub 3-1:1.0: 4 ports detected
- [ 3.317172] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.V0, max UDMA/100
- [ 3.319245] ata2.00: configured for UDMA/100
- [ 3.321312] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7710H 1.V0 PQ: 0 ANSI: 5
- [ 3.324038] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 3.324046] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 3.324208] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 3.324249] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 3.391377] usb 1-1.2: new high speed USB device number 3 using ehci_hcd
- [ 3.559445] usb 1-1.6: new full speed USB device number 4 using ehci_hcd
- [ 3.643240] ata6: SATA link down (SStatus 0 SControl 300)
- [ 3.727849] usb 3-1.2: new low speed USB device number 3 using xhci_hcd
- [ 3.749738] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.751237] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.752484] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.752860] usb 3-1.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 3.752867] usb 3-1.2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
- [ 3.755234] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.756731] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.758480] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.764001] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1c.5/0000:05:00.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input3
- [ 3.764062] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:05:00.0-1.2/input0
- [ 3.772145] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.773021] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.773769] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.774171] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1c.5/0000:05:00.0/usb3/3-1/3-1.2/3-1.2:1.1/input/input4
- [ 3.774255] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:05:00.0-1.2/input1
- [ 3.774264] usbcore: registered new interface driver usbhid
- [ 3.774266] usbhid: USB HID core driver
- [ 3.831474] usb 3-1.3: new high speed USB device number 4 using xhci_hcd
- [ 3.849708] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.850327] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.851277] hub 3-1.3:1.0: USB hub found
- [ 3.851748] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3.851849] hub 3-1.3:1.0: 4 ports detected
- [ 4.131511] usb 3-1.3.1: new full speed USB device number 5 using xhci_hcd
- [ 4.154355] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 4.155348] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 4.156342] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 4.185739] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
- [ 4.231496] usb 3-1.3.2: new low speed USB device number 6 using xhci_hcd
- [ 4.252866] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 4.255100] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 4.256614] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 4.257046] usb 3-1.3.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 4.263213] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.5/0000:05:00.0/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2:1.0/input/input5
- [ 4.263418] generic-usb 0003:046D:C050.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:05:00.0-1.3.2/input0
- [ 4.335477] usb 3-1.3.3: new full speed USB device number 7 using xhci_hcd
- [ 4.355898] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 4.357883] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 4.359355] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 4.360693] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 15.735039] udevd[391]: starting version 173
- [ 15.816099] cfg80211: Calling CRDA to update world regulatory domain
- [ 15.823496] lp: driver loaded but no devices found
- [ 15.823640] Bluetooth: Core ver 2.16
- [ 15.823674] NET: Registered protocol family 31
- [ 15.823676] Bluetooth: HCI device and connection manager initialized
- [ 15.823679] Bluetooth: HCI socket layer initialized
- [ 15.823682] Bluetooth: L2CAP socket layer initialized
- [ 15.825333] Bluetooth: SCO socket layer initialized
- [ 15.825792] Bluetooth: Generic Bluetooth USB driver ver 0.6
- [ 15.826811] nvidia: module license 'NVIDIA' taints kernel.
- [ 15.826815] Disabling lock debugging due to kernel taint
- [ 15.827400] usbcore: registered new interface driver btusb
- [ 15.834383] type=1400 audit(1327608915.793:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=527 comm="apparmor_parser"
- [ 15.834960] type=1400 audit(1327608915.793:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=527 comm="apparmor_parser"
- [ 15.835168] [Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS
- [ 15.835316] type=1400 audit(1327608915.793:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=527 comm="apparmor_parser"
- [ 15.837686] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 15.837701] ath9k 0000:02:00.0: setting latency timer to 64
- [ 15.853473] sony_laptop: Sony Notebook Control Driver v0.6
- [ 15.879430] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 15.879487] HDA Intel 0000:00:1b.0: irq 56 for MSI/MSI-X
- [ 15.879513] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 15.885458] EDAC MC: Ver: 2.1.0
- [ 15.886193] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
- [ 15.886219] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
- [ 15.886224] EDAC i7core: Driver loaded.
- [ 15.913825] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 15.914823] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 15.915986] usbcore: registered new interface driver snd-usb-audio
- [ 15.921949] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 15.928330] hda_codec: ALC275: BIOS auto-probing.
- [ 15.932738] ath: EEPROM regdomain: 0x65
- [ 15.932742] ath: EEPROM indicates we should expect a direct regpair map
- [ 15.932747] ath: Country alpha2 being used: 00
- [ 15.932749] ath: Regpair used: 0x65
- [ 15.932753] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 15.932758] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 15.932761] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 15.932764] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 15.932767] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 15.932771] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 15.932774] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 15.932778] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 15.932781] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 15.932785] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 15.932788] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 15.932792] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 15.932795] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 15.932799] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 15.932802] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 15.932806] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 15.932809] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 15.932814] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 15.932817] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 15.932822] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 15.932825] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 15.932830] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 15.932833] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 15.932838] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 15.932841] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 15.932845] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
- [ 15.932849] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
- [ 15.934066] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 15.934148] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
- [ 15.934264] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
- [ 15.934470] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 15.934476] hda_intel: Disabling MSI
- [ 15.934523] HDA Intel 0000:01:00.1: setting latency timer to 64
- [ 15.947643] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
- [ 15.948411] Registered led device: ath9k-phy0
- [ 15.948421] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc900057c0000, irq=16
- [ 15.955451] Linux video capture interface: v2.00
- [ 15.956046] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:18ba)
- [ 15.958127] input: UVC Camera (05ca:18ba) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input8
- [ 15.958295] usbcore: registered new interface driver uvcvideo
- [ 15.958298] USB Video Class driver (v1.1.0)
- [ 15.977801] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 15.977806] cfg80211: World regulatory domain updated:
- [ 15.977809] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 15.977813] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 15.977817] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 15.977821] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 15.977824] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 15.977827] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 16.003354] wmi: Mapper loaded
- [ 16.051975] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/SNY5001:00/input/input9
- [ 16.052024] acpi device:5f: registered as cooling_device8
- [ 16.052081] input: Sony Vaio Jogdial as /devices/virtual/input/input10
- [ 16.052138] sony_laptop: brightness ignored, must be controlled by ACPI video driver
- [ 16.086567] acpi device:60: registered as cooling_device9
- [ 16.086633] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:5e/LNXVIDEO:02/input/input11
- [ 16.086687] ACPI: Video Device [NGFX] (multi-head: yes rom: no post: no)
- [ 16.206178] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input12
- [ 16.224617] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input13
- [ 16.777599] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
- [ 16.809563] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
- [ 16.841450] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
- [ 16.873523] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
- [ 16.893558] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input14
- [ 16.893648] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input15
- [ 16.893710] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input16
- [ 16.893771] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input17
- [ 16.894214] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 16.894256] nvidia 0000:01:00.0: setting latency timer to 64
- [ 16.894262] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 16.894542] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011
- [ 16.979254] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
- [ 17.336334] vesafb: mode is 640x480x32, linelength=2560, pages=0
- [ 17.336338] vesafb: scrolling: redraw
- [ 17.336340] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 17.339120] vesafb: framebuffer at 0xe1000000, mapped to 0xffffc90006900000, using 1216k, total 1216k
- [ 17.339237] Console: switching to colour frame buffer device 80x30
- [ 17.339251] fb0: VESA VGA frame buffer device
- [ 17.610492] ppdev: user-space parallel port driver
- [ 17.611446] type=1400 audit(1327608917.569:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1057 comm="apparmor_parser"
- [ 17.612176] type=1400 audit(1327608917.569:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1057 comm="apparmor_parser"
- [ 17.612640] type=1400 audit(1327608917.569:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1057 comm="apparmor_parser"
- [ 17.613318] type=1400 audit(1327608917.573:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1060 comm="apparmor_parser"
- [ 17.613536] type=1400 audit(1327608917.573:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1065 comm="apparmor_parser"
- [ 17.614062] type=1400 audit(1327608917.573:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1062 comm="apparmor_parser"
- [ 17.614075] type=1400 audit(1327608917.573:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1060 comm="apparmor_parser"
- [ 17.727432] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 17.735067] sky2 0000:04:00.0: eth0: enabling interface
- [ 17.736354] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 17.799128] init: failsafe main process (999) killed by TERM signal
- [ 17.799943] init: apport pre-start process (1120) terminated with status 1
- [ 17.808574] init: apport post-stop process (1151) terminated with status 1
- [ 17.930697] Bluetooth: RFCOMM TTY layer initialized
- [ 17.930705] Bluetooth: RFCOMM socket layer initialized
- [ 17.930708] Bluetooth: RFCOMM ver 1.11
- [ 17.932631] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 17.932633] Bluetooth: BNEP filters: protocol multicast
- [ 18.705082] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
- [ 19.247821] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
- [ 19.256485] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
- [ 19.350110] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
- [ 20.138603] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 20.327255] wlan0: authenticate with 00:1c:28:15:05:32 (try 1)
- [ 20.329282] wlan0: authenticated
- [ 20.362832] wlan0: associate with 00:1c:28:15:05:32 (try 1)
- [ 20.365537] wlan0: RX AssocResp from 00:1c:28:15:05:32 (capab=0x431 status=0 aid=1)
- [ 20.365539] wlan0: associated
- [ 20.366265] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 21.639293] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 21.640070] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 21.641290] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 23.289593] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
- [ 31.127377] wlan0: no IPv6 routers present
- [ 90.456141] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 90.456165] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 90.488108] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 104.725347] firewire_ohci 0000:03:00.3: PCI INT D disabled
- [ 104.725354] firewire_ohci: Removed fw-ohci device.
- [ 118.152188] firewire_ohci 0000:03:00.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
- [ 118.152204] firewire_ohci 0000:03:00.3: setting latency timer to 64
- [ 118.206281] firewire_ohci: Added fw-ohci device 0000:03:00.3, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x11
- [ 419.046088] firewire_ohci: node ID not valid, new bus reset in progress
- [ 419.047834] irq_handler: 29 callbacks suppressed
- [ 419.047839] firewire_ohci: isochronous cycle inconsistent
- [ 419.545717] firewire_core: created device fw0: GUID 08004603035126ed, S400
- [ 421.305795] firewire_core: BM lock failed, making local node (ffc0) root.
- [ 421.305805] firewire_core: phy config: card 0, new root=ffc0, gap_count=5
- [ 466.898336] firewire_core: skipped bus generations, destroying all nodes
- [ 466.898353] firewire_core: Parent port inconsistency for node 0: parent_count=1
- [ 466.898359] firewire_core: topology build failed
- [ 466.898425] firewire_core: giving up on config rom for node id ffc1
- [ 660.260346] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 660.261229] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 660.262464] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 1276.310431] firewire_ohci: node ID not valid, new bus reset in progress
- [ 1276.310575] firewire_ohci: node ID not valid, new bus reset in progress
- [ 1276.310762] firewire_ohci: isochronous cycle inconsistent
- [ 1276.391819] firewire_ohci: node ID not valid, new bus reset in progress
- [ 1276.392227] firewire_ohci: node ID not valid, new bus reset in progress
- [ 1276.392351] firewire_core: skipped bus generations, destroying all nodes
- [ 1276.400263] firewire_ohci: node ID not valid, new bus reset in progress
- [ 1276.400448] firewire_core: skipped bus generations, destroying all nodes
- [ 1276.404608] firewire_ohci: node ID not valid, new bus reset in progress
- [ 1276.404896] firewire_core: skipped bus generations, destroying all nodes
- [ 1276.809089] firewire_core: giving up on config rom for node id ffc0
- [ 1276.809097] firewire_core: giving up on config rom for node id ffc1
- [ 1276.889095] firewire_core: giving up on config rom for node id ffc0
- [ 1276.889102] firewire_core: giving up on config rom for node id ffc1
- [ 1276.896995] firewire_core: giving up on config rom for node id ffc0
- [ 1276.897003] firewire_core: giving up on config rom for node id ffc1
- [ 1276.901298] firewire_core: created device fw0: GUID 08004603035126ed, S400
- [ 1276.901308] firewire_core: giving up on config rom for node id ffc0
- [ 1280.823167] CE: hpet increased min_delta_ns to 20113 nsec
- [ 2048.155247] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2057.495260] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2057.559223] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2058.550815] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2058.811905] usb 3-1.2: reset low speed USB device number 3 using xhci_hcd
- [ 2058.831386] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801a1dc8080
- [ 2058.831395] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801a1dc8540
- [ 2058.831411] usb 3-1.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 2058.831421] usb 3-1.2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
- [ 2059.134554] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2059.942193] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2060.549938] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2060.810890] usb 3-1.2: reset low speed USB device number 3 using xhci_hcd
- [ 2060.830477] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801a1dc8080
- [ 2060.830486] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801a1dc8540
- [ 2060.830498] usb 3-1.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 2060.830511] usb 3-1.2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
- [ 2068.002836] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2068.026762] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2091.007864] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2091.007900] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2091.007935] usb 3-1: USB disconnect, device number 2
- [ 2091.007940] usb 3-1.2: USB disconnect, device number 3
- [ 2091.008063] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2091.008856] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2091.009068] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2091.009244] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2091.009438] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2091.009621] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2091.015947] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2091.083695] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2091.084791] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2091.353080] usb 3-1.3: USB disconnect, device number 4
- [ 2091.353087] usb 3-1.3.1: USB disconnect, device number 5
- [ 2091.354176] usb 3-1.3.2: USB disconnect, device number 6
- [ 2091.437807] usb 3-1.3.3: USB disconnect, device number 7
- [ 2091.680739] usb 3-1: new high speed USB device number 8 using xhci_hcd
- [ 2091.700030] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2091.700632] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2091.701732] hub 3-1:1.0: USB hub found
- [ 2091.702252] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2091.702389] hub 3-1:1.0: 4 ports detected
- [ 2091.977233] usb 3-1.2: new low speed USB device number 9 using xhci_hcd
- [ 2091.999827] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.001275] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.002524] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.002954] usb 3-1.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 2092.002964] usb 3-1.2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
- [ 2092.005249] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.006772] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.010864] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1c.5/0000:05:00.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input18
- [ 2092.011011] generic-usb 0003:046D:C31C.0004: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:05:00.0-1.2/input0
- [ 2092.012795] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.020573] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.021317] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.022016] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.022434] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1c.5/0000:05:00.0/usb3/3-1/3-1.2/3-1.2:1.1/input/input19
- [ 2092.022570] generic-usb 0003:046D:C31C.0005: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:05:00.0-1.2/input1
- [ 2092.097184] usb 3-1.3: new high speed USB device number 10 using xhci_hcd
- [ 2092.115605] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.116226] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.117425] hub 3-1.3:1.0: USB hub found
- [ 2092.117963] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.118105] hub 3-1.3:1.0: 4 ports detected
- [ 2092.400981] usb 3-1.3.1: new full speed USB device number 11 using xhci_hcd
- [ 2092.423684] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.424680] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.425680] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.427934] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.429035] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.500917] usb 3-1.3.2: new low speed USB device number 12 using xhci_hcd
- [ 2092.522267] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.524380] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.525513] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.526000] usb 3-1.3.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 2092.533148] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.5/0000:05:00.0/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2:1.0/input/input20
- [ 2092.533445] generic-usb 0003:046D:C050.0006: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:05:00.0-1.3.2/input0
- [ 2092.604786] usb 3-1.3.3: new full speed USB device number 13 using xhci_hcd
- [ 2092.625473] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.627467] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.628969] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.630217] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.651242] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2092.824289] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2093.376021] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2093.456007] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2093.543967] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2093.671914] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2093.672846] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2093.674046] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2093.679963] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2093.791883] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 2098.653790] usb 3-2: new high speed USB device number 14 using xhci_hcd
- [ 2098.671482] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2098.671852] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2098.672189] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2098.672684] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 2098.860768] usbcore: registered new interface driver uas
- [ 2098.884517] Initializing USB Mass Storage driver...
- [ 2098.884746] scsi6 : usb-storage 3-2:1.0
- [ 2098.884876] usbcore: registered new interface driver usb-storage
- [ 2098.884879] USB Mass Storage support registered.
- [ 2099.882559] scsi 6:0:0:0: Direct-Access Seagate Portable 0130 PQ: 0 ANSI: 4
- [ 2100.005508] sd 6:0:0:0: Attached scsi generic sg2 type 0
- [ 2100.006109] sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 2100.006626] sd 6:0:0:0: [sdb] Write Protect is off
- [ 2100.006634] sd 6:0:0:0: [sdb] Mode Sense: 2f 08 00 00
- [ 2100.007102] sd 6:0:0:0: [sdb] No Caching mode page present
- [ 2100.007111] sd 6:0:0:0: [sdb] Assuming drive cache: write through
- [ 2100.010247] sd 6:0:0:0: [sdb] No Caching mode page present
- [ 2100.010254] sd 6:0:0:0: [sdb] Assuming drive cache: write through
- [ 2100.054895] sdb: sdb1
- [ 2100.056550] sd 6:0:0:0: [sdb] No Caching mode page present
- [ 2100.056557] sd 6:0:0:0: [sdb] Assuming drive cache: write through
- [ 2100.056563] sd 6:0:0:0: [sdb] Attached SCSI disk
- [ 2162.387386] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
- [ 2162.423029] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
- [ 2479.096524] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
- [ 2889.860832] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
- [ 3186.225191] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3186.226023] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3186.227238] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3203.959198] usb 3-1.3.3: USB disconnect, device number 13
- [ 3239.887983] usb 3-1.3.3: new full speed USB device number 15 using xhci_hcd
- [ 3239.908788] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3239.910780] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3239.912325] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3239.913533] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3240.081376] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3241.095571] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3241.096417] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3241.097806] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3251.938883] usb 3-1.3.3: USB disconnect, device number 15
- [ 3272.194362] usb 3-1.3.3: new full speed USB device number 16 using xhci_hcd
- [ 3272.215105] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3272.217099] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3272.218601] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3272.219850] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3272.379878] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3273.400094] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3273.400834] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3273.402086] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3277.400090] usb 3-1.3.3: USB disconnect, device number 16
- [ 3340.389662] usb 3-1.3.3: new full speed USB device number 17 using xhci_hcd
- [ 3340.410279] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3340.412255] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3340.413773] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3340.414967] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3340.578996] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3341.601217] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3341.601965] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3341.603189] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3413.713174] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3413.714110] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3413.715284] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3467.934491] firewire_ohci: isochronous cycle inconsistent
- [ 3469.934248] firewire_core: BM lock failed, making local node (ffc0) root.
- [ 3469.934255] firewire_core: phy config: card 0, new root=ffc0, gap_count=5
- [ 3483.904452] usb 3-1.3.3: USB disconnect, device number 17
- [ 3494.756296] usb 3-1.3.3: new full speed USB device number 18 using xhci_hcd
- [ 3494.777013] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3494.778984] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3494.780464] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3494.781712] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3494.946174] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3495.967628] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3495.968497] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3495.969679] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3520.240099] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3520.241001] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3520.242165] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3520.496995] firewire_core: giving up on config rom for node id ffc0
- [ 3692.851601] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3692.852321] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3692.853679] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 3730.928013] firewire_ohci 0000:03:00.3: PCI INT D disabled
- [ 3730.928020] firewire_ohci: Removed fw-ohci device.
- [ 3783.892288] firewire_ohci 0000:03:00.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
- [ 3783.892303] firewire_ohci 0000:03:00.3: setting latency timer to 64
- [ 3783.945805] firewire_ohci: Added fw-ohci device 0000:03:00.3, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x11
- [ 3784.445494] firewire_core: created device fw0: GUID 08004603035126ed, S400
- [ 3836.507434] firewire_core: giving up on config rom for node id ffc0
- [ 4302.861365] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 4302.862234] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 4302.863444] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 4519.170002] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 4519.170892] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 4519.172134] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 4565.033936] firewire_ohci: AR evt_bus_reset, generation 3
- [ 4565.034087] firewire_ohci: 2 selfIDs, generation 3, local node ID ffc1
- [ 4565.034095] firewire_ohci: selfID 0: 807f8990, phy 0 [p-.] S400 gc=63 +15W Lc
- [ 4565.034101] firewire_ohci: selfID 0: 817f88c2, phy 1 [c..] S400 gc=63 +0W Lci
- [ 4565.034151] firewire_core: phy config: card 0, new root=ffc1, gap_count=5
- [ 4565.034227] firewire_ohci: AT ack_complete, PHY 01c50000 fe3affff
- [ 4565.034290] firewire_ohci: 2 selfIDs, generation 4, local node ID ffc1
- [ 4565.034296] firewire_ohci: selfID 0: 80458990, phy 0 [p-.] S400 gc=5 +15W Lc
- [ 4565.034302] firewire_ohci: selfID 0: 814588c2, phy 1 [c..] S400 gc=5 +0W Lci
- [ 4565.034313] firewire_ohci: AR evt_bus_reset, generation 4
- [ 4565.531318] firewire_ohci: AT spd 0 tl 03, ffc1 -> ffc0, ack_pending , QR req, fffff0000400
- [ 4567.505286] firewire_ohci: 1 selfIDs, generation 5, local node ID ffc0
- [ 4567.505296] firewire_ohci: selfID 0: 807f8842, phy 0 [-..] S400 gc=63 +0W Lci
- [ 4567.505313] firewire_ohci: AR evt_bus_reset, generation 5
- [ 4567.534395] firewire_core: giving up on config rom for node id ffc0
- [ 5291.516528] xhci_hcd 0000:05:00.0: WARN: transfer error on endpoint
- [ 5317.144313] usb 3-1.3.3: USB disconnect, device number 18
- [ 5323.963302] usb 3-1.3.3: new high speed USB device number 19 using xhci_hcd
- [ 5323.981102] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 5323.981598] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 5323.982099] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 5323.982694] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 5323.983971] scsi7 : usb-storage 3-1.3.3:1.0
- [ 5324.983575] scsi 7:0:0:0: Direct-Access ODYS MP3 Player PQ: 0 ANSI: 0 CCS
- [ 5325.170539] sd 7:0:0:0: Attached scsi generic sg3 type 0
- [ 5325.171032] sd 7:0:0:0: [sdc] 3944448 512-byte logical blocks: (2.01 GB/1.88 GiB)
- [ 5325.171367] sd 7:0:0:0: [sdc] Write Protect is off
- [ 5325.171376] sd 7:0:0:0: [sdc] Mode Sense: 3b 00 00 00
- [ 5325.171810] sd 7:0:0:0: [sdc] No Caching mode page present
- [ 5325.171817] sd 7:0:0:0: [sdc] Assuming drive cache: write through
- [ 5325.173802] sd 7:0:0:0: [sdc] No Caching mode page present
- [ 5325.173812] sd 7:0:0:0: [sdc] Assuming drive cache: write through
- [ 5325.174609] sdc: sdc1
- [ 5325.176188] sd 7:0:0:0: [sdc] No Caching mode page present
- [ 5325.176193] sd 7:0:0:0: [sdc] Assuming drive cache: write through
- [ 5325.176197] sd 7:0:0:0: [sdc] Attached SCSI removable disk
- [ 5332.223721] usb 3-2: reset high speed USB device number 14 using xhci_hcd
- [ 5332.240770] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
- [ 5332.240918] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801a5a4c800
- [ 5332.240927] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801a5a4c840
- [ 5346.307352] usb 3-2: USB disconnect, device number 14
- [ 5902.872248] firewire_ohci: AR evt_bus_reset, generation 6
- [ 5902.872430] firewire_ohci: isochronous cycle inconsistent
- [ 5902.872453] firewire_ohci: 2 selfIDs, generation 6, local node ID ffc0
- [ 5902.872460] firewire_ohci: selfID 0: 807f8882, phy 0 [p..] S400 gc=63 +0W Lci
- [ 5902.872467] firewire_ohci: selfID 0: 817f89d0, phy 1 [c-.] S400 gc=63 +15W Lc
- [ 5902.872542] firewire_ohci: AT spd 0 tl 3e, ffc0 -> ffc1, ack_pending , Lk req, fffff000021c 8,2
- [ 5903.369943] firewire_ohci: AT spd 0 tl 05, ffc0 -> ffc1, ack_pending , QR req, fffff0000400
- [ 5904.873272] firewire_core: BM lock failed, making local node (ffc0) root.
- [ 5904.873279] firewire_core: phy config: card 0, new root=ffc0, gap_count=5
- [ 5904.873335] firewire_ohci: AT ack_complete, PHY 00c50000 ff3affff
- [ 5904.873391] firewire_ohci: 2 selfIDs, generation 7, local node ID ffc1
- [ 5904.873397] firewire_ohci: selfID 0: 80458990, phy 0 [p-.] S400 gc=5 +15W Lc
- [ 5904.873403] firewire_ohci: selfID 0: 814588c2, phy 1 [c..] S400 gc=5 +0W Lci
- [ 5904.873416] firewire_ohci: AR evt_bus_reset, generation 7
- [ 5908.379807] firewire_ohci: AT spd 0 tl 10, ffc1 -> ffc0, ack_pending , QR req, fffff0000400
- [ 5913.385688] firewire_ohci: AT spd 0 tl 11, ffc1 -> ffc0, ack_pending , QR req, fffff0000400
- [ 5918.391566] firewire_ohci: AT spd 0 tl 12, ffc1 -> ffc0, ack_pending , QR req, fffff0000400
- [ 5923.397701] firewire_ohci: AT spd 0 tl 13, ffc1 -> ffc0, ack_pending , QR req, fffff0000400
- [ 5928.403258] firewire_ohci: AT spd 0 tl 14, ffc1 -> ffc0, ack_pending , QR req, fffff0000400
- [ 5945.436234] firewire_core: giving up on config rom for node id ffc0
- [ 6077.604005] CE: hpet increased min_delta_ns to 30169 nsec
Add Comment
Please, Sign In to add comment