boot failed 2.6.34-arm

ARM PB11MPCore Boot Monitor
Version:    V4.1.7
Build Date: Feb 17 2009
Tile Site : Tile Not Fitted
Endian:     Little
Running boot script from flash - BOOTSCRIPT
Loaded file uboot.axf
Running image


U-Boot 2010.03 (May 21 2010 - 17:12:22)

***  Auto-detects ethernet chip ***





Code cloned from branch 090728_armdevCS of git://linux-arm.org/u-boot-armdev.git


Release AEL-5.0
Remote commit cloned   UNKNOWN
Latest commit locally  UNKNOWN
git state UNKNOWN
DRAM:  0 Bytes<NULL>Flash: 64 MiB
In:    serial
Out:   serial
Err:   serial
Net:   LAN9118 ethernet chip detected
SMC_RV-9118-0
Hit any key to stop autoboot:  0
Using SMC_RV-9118-0 device
TFTP from server 152.2.128.169; our IP address is 152.2.133.117
Filename 'uImage'.
Load address: 0x7fc0
Loading: #################################################################
	 #################################################################
	 ##################################
done
Bytes transferred = 2393428 (248554 hex)
## Booting kernel from Legacy Image at 00007fc0 ...
   Image Name:   Linux-2.6.33
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2393364 Bytes = 2.3 MiB
   Load Address: 70008000
   Entry Point:  70008000
   Loading Kernel Image ... OK
OK
ARM internal:: Moved kernel boot params from 0x00000100 to 0x70000100 to match image header entry point 0x70008000

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Initializing cgroup subsys cpuset
Linux version 2.6.33 (bbb@ludwig.cs.unc.edu) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #4 SMP PREEMPT Thu May 27 19:21:10 EDT 2010
CPU: ARMv6-compatible processor [410fb020] revision 0 (ARMv7), cr=00c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: ARM-RealView PB11MPCore
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writealloc
PERCPU: Embedded 6 pages/cpu @c08a2000 s9920 r0 d14656 u65536
pcpu-alloc: s9920 r0 d14656 u65536 alloc=16*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
Kernel command line: root=/dev/nfs ip=dhcp console=ttyAMA0 video=vc:1-2clcdfb: nfsroot=152.2.128.169:/home/nfsroot,v3
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512MB = 512MB total
Memory: 514688KB available (3944K code, 437K data, 160K init, 0K highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:128
Console: colour dummy device 80x30
Calibrating delay loop... 83.55 BogoMIPS (lpj=417792)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Calibrating local timer... 104.47MHz.
CPU1: Booted secondary processor
CPU2: Booted secondary processor
CPU3: Booted secondary processor
Brought up 4 CPUs
SMP: Total of 4 processors activated (334.23 BogoMIPS).
NET: Registered protocol family 16
L2X0 cache controller enabled
Serial: AMBA PL011 UART driver
dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 36) is a AMBA/PL011
console [ttyAMA0] enabled
dev:uart1: ttyAMA1 at MMIO 0x1000a000 (irq = 37) is a AMBA/PL011
dev:uart2: ttyAMA2 at MMIO 0x1000b000 (irq = 78) is a AMBA/PL011
fpga:uart3: ttyAMA3 at MMIO 0x1000c000 (irq = 79) is a AMBA/PL011
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.21.
Switching to clocksource timer3
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 1005
io scheduler noop registered (default)
CLCD: RealView hardware, XVGA display
Console: switching to colour frame buffer device 128x48
scsi0 : pata_platform
ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
armflash.0-0: Found 2 x16 devices at 0x0 in 32-bit bank
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
Using auto-unlock on power-up/resume
cfi_cmdset_0001: Erase suspend on write enabled
armflash.0-1: Found 2 x16 devices at 0x0 in 32-bit bank
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
Using auto-unlock on power-up/resume
cfi_cmdset_0001: Erase suspend on write enabled
ata1.00: ATA-0: SILICONSYSTEMS INC 2GB, 241-0230, max MWDMA2
ata1.00: 4098528 sectors, multi 0: LBA
ata1.00: Drive reports diagnostics failure. This may indicate a drive
ata1.00: fault or invalid emulation. Contact drive vendor for information.
ata1.00: configured for PIO
Concatenating MTD devices:
(0): "armflash.0-0"
ata1.00: configured for PIO
ata1: EH complete
scsi 0:0:0:0: Direct-Access     ATA      SILICONSYSTEMS I 241- PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4098528 512-byte logical blocks: (2.09 GB/1.95 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
(1): "armflash.0-1"
into device "armflash.0"
RedBoot partition parsing not available
afs partition parsing not available
smsc911x: Driver version 2008-10-21.
 sda:
smsc911x-mdio: probed
eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
net eth0: MAC Address: 00:02:f7:00:36:86
 sda1
isp1760 isp1760.0: NXP ISP1760 USB Host Controller
sd 0:0:0:0: [sda] Attached SCSI disk
isp1760 isp1760.0: new USB bus registered, assigned bus number 1
isp1760 isp1760.0: bus width: 32, oc: digital
isp1760 isp1760.0: irq 35, io mem 0x4f000000
isp1760 isp1760.0: USB ISP 1761 HW rev. 1 started
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: NXP ISP1760 USB Host Controller
usb usb1: Manufacturer: Linux 2.6.33 isp1760-hcd
usb usb1: SerialNumber: isp1760.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ISP1760 USB device initialised
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
rtc-ds1307 0-0068: rtc core: registered ds1338 as rtc0
rtc-ds1307 0-0068: 56 bytes nvram
mmc0: MMCI rev 0 cfg 00 at 0x0000000010005000 irq 46,47
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
aaci-pl041 fpga:aaci: ARM AC'97 Interface at 0x0000000010004000, irq 32, fifo 512
ALSA device list:
  #0: ARM AC'97 Interface at 0x0000000010004000, irq 32
oprofile: using arm/mpcore
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 3
rtc-ds1307 0-0068: setting system clock to 2010-05-28 15:33:06 UTC (1275060786)
port 1 high speed
usb 1-1: new high speed USB device using isp1760 and address 2
port 1 high speed
input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0
usb 1-1: New USB device found, idVendor=0471, idProduct=3526
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: ISP1520
usb 1-1: Manufacturer: Philips Semiconductors
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 3 ports detected
net eth0: SMSC911x/921x identified at 0xe08e0000, IRQ: 41
input: PS/2 Generic Mouse as /devices/fpga:kmi1/serio1/input/input1
Sending DHCP requests .., OK
IP-Config: Got DHCP answer from 152.2.129.82, my address is 152.2.133.117
IP-Config: Complete:
     device=eth0, addr=152.2.133.117, mask=255.255.240.0, gw=152.2.128.1,
     host=armsystem.cs.unc.edu, domain=cs.unc.edu, nis-domain=(none),
     bootserver=152.2.129.82, rootserver=152.2.128.169, rootpath=
Looking up port of RPC 100003/3 on 152.2.128.169
Looking up port of RPC 100005/3 on 152.2.128.169
VFS: Mounted root (nfs filesystem) on device 0:12.
Freeing init memory: 160K
nfs: server 152.2.128.169 not responding, still trying
nfs: server 152.2.128.169 not responding, still trying