API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 4th, 2014
122
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 107.40 KB | None | 0 0
raw download clone embed print report
  1. # cat /proc/last_kmsg
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 2.6.32.9-g2e3a577 (jianc@jianc-SGC47K8KQ) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Fri Jan 3 16:20:39 PST 2014
  4. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
  5. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  6. [ 0.000000] Machine: mapphone_
  7. [ 0.000000] parse_tag_mbm_version: mbm_version=0x00001234
  8. [ 0.000000] flat_dev_tree_address=0x85000000, flat_dev_tree_size == 0x00080000
  9. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  10. [ 0.000000] OMAP3630 ES1.1 (l2cache iva sgx neon isp )
  11. [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
  12. [ 0.000000] Reserving 4194304 bytes SDRAM for VRAM
  13. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 126492
  14. [ 0.000000] Kernel command line: console=/dev/ttyS0 initcall_debug rw mem=498M@0x80C00000 init=/init ip=off brdrev=P2A androidboot.bootloader=0x0000 mmcparts=mmcblk1:p7(pds),p15(boot),p16(recovery),p17(cdrom),p18(misc),p19(cid),p20(kpanic),p21(system),p22(cache),p23(preinstall),p24(userdata) androidboot.mode=kpanic
  15. [ 0.000000] boot_mode=kpanic
  16. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  17. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  18. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  19. [ 0.000000] Memory: 498MB = 498MB total
  20. [ 0.000000] Memory: 486144KB available (5200K code, 2415K data, 180K init, 0K highmem)
  21. [ 0.000000] Hierarchical RCU implementation.
  22. [ 0.000000] NR_IRQS:368
  23. [ 0.000000] get_omap3630_revision_id: Devtree omap3630-variant 0x36301200
  24. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/200/300 MHz
  25. [ 0.000000] Reprogramming SDRC clock to 200000000 Hz
  26. [ 0.000000] GPMC revision 5.0
  27. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  28. [ 0.000000] Total of 96 interrupts on 1 active controller
  29. [ 0.000000] OMAP GPIO hardware version 2.5
  30. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  31. [ 0.000000] Calibrating delay loop... 298.32 BogoMIPS (lpj=1167360)
  32. [ 0.000000] Mount-cache hash table entries: 512
  33. [ 0.000000] Initializing cgroup subsys cpuacct
  34. [ 0.000000] CPU: Testing write buffer coherency: ok
  35. [ 0.000000] calling spawn_ksoftirqd+0x0/0x48 @ 1
  36. [ 0.000000] initcall spawn_ksoftirqd+0x0/0x48 returned 0 after 0 usecs
  37. [ 0.000000] calling spawn_softlockup_task+0x0/0x6c @ 1
  38. [ 0.000000] initcall spawn_softlockup_task+0x0/0x6c returned 0 after 0 usecs
  39. [ 0.000000] calling init_synthetic_tsc+0x0/0xbc @ 1
  40. [ 0.000000] initcall init_synthetic_tsc+0x0/0xbc returned 0 after 38146 usecs
  41. [ 0.000000] calling init_mmap_min_addr+0x0/0x20 @ 1
  42. [ 0.000000] initcall init_mmap_min_addr+0x0/0x20 returned 0 after 0 usecs
  43. [ 0.000000] calling init_cpufreq_transition_notifier_list+0x0/0x24 @ 1
  44. [ 0.000000] initcall init_cpufreq_transition_notifier_list+0x0/0x24 returned 0 after 0 usecs
  45. [ 0.000000] calling net_ns_init+0x0/0x11c @ 1
  46. [ 0.000000] initcall net_ns_init+0x0/0x11c returned 0 after 0 usecs
  47. [ 0.000000] calling ptrace_break_init+0x0/0x24 @ 1
  48. [ 0.000000] initcall ptrace_break_init+0x0/0x24 returned 0 after 0 usecs
  49. [ 0.000000] calling consistent_init+0x0/0xac @ 1
  50. [ 0.000000] initcall consistent_init+0x0/0xac returned 0 after 0 usecs
  51. [ 0.000000] calling v6_userpage_init+0x0/0x8 @ 1
  52. [ 0.000000] initcall v6_userpage_init+0x0/0x8 returned 0 after 0 usecs
  53. [ 0.000000] calling sysctl_init+0x0/0x1c @ 1
  54. [ 0.000000] initcall sysctl_init+0x0/0x1c returned 0 after 0 usecs
  55. [ 0.000000] calling ksysfs_init+0x0/0xc4 @ 1
  56. [ 0.000000] initcall ksysfs_init+0x0/0xc4 returned 0 after 0 usecs
  57. [ 0.000000] calling async_init+0x0/0x64 @ 1
  58. [ 0.000000] initcall async_init+0x0/0x64 returned 0 after 0 usecs
  59. [ 0.000000] calling init_jiffies_clocksource+0x0/0xc @ 1
  60. [ 0.000000] initcall init_jiffies_clocksource+0x0/0xc returned 0 after 0 usecs
  61. [ 0.000000] calling pm_init+0x0/0x48 @ 1
  62. [ 0.000000] initcall pm_init+0x0/0x48 returned 0 after 0 usecs
  63. [ 0.000000] calling wakelocks_init+0x0/0x13c @ 1
  64. [ 0.000000] initcall wakelocks_init+0x0/0x13c returned 0 after 0 usecs
  65. [ 0.000000] calling init_zero_pfn+0x0/0x34 @ 1
  66. [ 0.000000] initcall init_zero_pfn+0x0/0x34 returned 0 after 0 usecs
  67. [ 0.000000] calling filelock_init+0x0/0x3c @ 1
  68. [ 0.000000] initcall filelock_init+0x0/0x3c returned 0 after 0 usecs
  69. [ 0.000000] calling init_misc_binfmt+0x0/0x40 @ 1
  70. [ 0.000000] initcall init_misc_binfmt+0x0/0x40 returned 0 after 0 usecs
  71. [ 0.000000] calling init_script_binfmt+0x0/0x10 @ 1
  72. [ 0.000000] initcall init_script_binfmt+0x0/0x10 returned 0 after 0 usecs
  73. [ 0.000000] calling init_elf_binfmt+0x0/0x10 @ 1
  74. [ 0.000000] initcall init_elf_binfmt+0x0/0x10 returned 0 after 0 usecs
  75. [ 0.000000] calling random32_init+0x0/0x78 @ 1
  76. [ 0.000000] initcall random32_init+0x0/0x78 returned 0 after 0 usecs
  77. [ 0.000000] calling omap_dss_init+0x0/0x68 @ 1
  78. [ 0.000000] initcall omap_dss_init+0x0/0x68 returned 0 after 7629 usecs
  79. [ 0.000000] calling regulator_init+0x0/0x30 @ 1
  80. [ 0.000000] regulator: core version 0.5
  81. [ 0.000000] initcall regulator_init+0x0/0x30 returned 0 after 0 usecs
  82. [ 0.000000] calling cpufreq_core_init+0x0/0x5c @ 1
  83. [ 0.000000] initcall cpufreq_core_init+0x0/0x5c returned 0 after 0 usecs
  84. [ 0.000000] calling cpuidle_init+0x0/0x24 @ 1
  85. [ 0.000000] initcall cpuidle_init+0x0/0x24 returned 0 after 0 usecs
  86. [ 0.000000] calling sock_init+0x0/0x6c @ 1
  87. [ 0.000000] initcall sock_init+0x0/0x6c returned 0 after 0 usecs
  88. [ 0.000000] calling netlink_proto_init+0x0/0x154 @ 1
  89. [ 0.000000] NET: Registered protocol family 16
  90. [ 0.000000] initcall netlink_proto_init+0x0/0x154 returned 0 after 0 usecs
  91. [ 0.000000] calling bdi_class_init+0x0/0x3c @ 1
  92. [ 0.000000] initcall bdi_class_init+0x0/0x3c returned 0 after 0 usecs
  93. [ 0.000000] calling kobject_uevent_init+0x0/0x64 @ 1
  94. [ 0.000000] initcall kobject_uevent_init+0x0/0x64 returned 0 after 0 usecs
  95. [ 0.000000] calling lcd_class_init+0x0/0x58 @ 1
  96. [ 0.000000] initcall lcd_class_init+0x0/0x58 returned 0 after 0 usecs
  97. [ 0.000000] calling backlight_class_init+0x0/0x70 @ 1
  98. [ 0.000000] initcall backlight_class_init+0x0/0x70 returned 0 after 0 usecs
  99. [ 0.000000] calling tty_class_init+0x0/0x44 @ 1
  100. [ 0.000000] initcall tty_class_init+0x0/0x44 returned 0 after 0 usecs
  101. [ 0.000000] calling spi_init+0x0/0x84 @ 1
  102. [ 0.000000] initcall spi_init+0x0/0x84 returned 0 after 7629 usecs
  103. [ 0.000000] calling i2c_init+0x0/0x6c @ 1
  104. [ 0.000000] initcall i2c_init+0x0/0x6c returned 0 after 0 usecs
  105. [ 0.000000] calling ram_console_module_init+0x0/0xc @ 1
  106. [ 0.000000] initcall ram_console_module_init+0x0/0xc returned 0 after 0 usecs
  107. [ 0.000000] calling customize_machine+0x0/0x24 @ 1
  108. [ 0.000000] Device tree prop padinit override done
  109. [ 0.000000] Device tree prop padwkupsinit override done
  110. [ 0.000000] Device tree prop offmodeinit override done
  111. [ 0.000000] Device tree prop offmodewkupsinit override done
  112. [ 0.000000] GPIO mapping write: pin = 16, name = als_int
  113. [ 0.000000] GPIO mapping write: pin = 28, name = akm8975_reset
  114. [ 0.000000] GPIO mapping write: pin = 175, name = akm8975_int
  115. [ 0.000000] GPIO mapping write: pin = 21, name = bt_reset_b
  116. [ 0.000000] GPIO mapping write: pin = 8, name = bt_wake_b
  117. [ 0.000000] GPIO mapping write: pin = 15, name = bt_host_wake_b
  118. [ 0.000000] GPIO mapping write: pin = 186, name = wlan_reset
  119. [ 0.000000] GPIO mapping write: pin = 100, name = silence_data
  120. [ 0.000000] GPIO mapping write: pin = 182, name = vib_control_en
  121. [ 0.000000] GPIO mapping write: pin = 176, name = power_off
  122. [ 0.000000] GPIO mapping write: pin = 109, name = touch_panel_int
  123. [ 0.000000] GPIO mapping write: pin = 164, name = touch_panel_rst
  124. [ 0.000000] GPIO mapping write: pin = 160, name = slider_data
  125. [ 0.000000] GPIO mapping write: pin = 42, name = fm_enable
  126. [ 0.000000] GPIO mapping write: pin = 127, name = ipc_o_bp_pwron
  127. [ 0.000000] GPIO mapping write: pin = 128, name = ipc_o_ap_reset_bp
  128. [ 0.000000] GPIO mapping write: pin = 157, name = ipc_o_bp_flash_en
  129. [ 0.000000] GPIO mapping write: pin = 129, name = ipc_i_bp_resout
  130. [ 0.000000] GPIO mapping write: pin = 141, name = ipc_i_bp_ready
  131. [ 0.000000] GPIO mapping write: pin = 59, name = ipc_i_bp_ready2
  132. [ 0.000000] GPIO mapping write: pin = 14, name = ipc_i_bp_ready3
  133. [ 0.000000] GPIO mapping write: pin = 167, name = ipc_o_ap_ready
  134. [ 0.000000] GPIO mapping write: pin = 110, name = ipc_o_ap_ready2
  135. [ 0.000000] GPIO mapping write: pin = 42, name = ipc_o_ap_ready3
  136. [ 0.000000] GPIO mapping write: pin = 140, name = ipc_o_usb_bypass
  137. [ 0.000000] GPIO mapping write: pin = 142, name = ipc_o_usb_susp
  138. [ 0.000000] GPIO mapping write: pin = 155, name = ipc_o_usb_txen_n
  139. [ 0.000000] Too long gpio map string name!
  140. [ 0.000000] GPIO mapping write: pin = 26, name = headset_uart_switch
  141. [ 0.000000] GPIO mapping write: pin = 22, name = accel1_int
  142. [ 0.000000] GPIO mapping write: pin = 143, name = ipc_bpwake_strobe
  143. [ 0.000000] GPIO mapping write: pin = 29, name = ipc_apwake_trigger
  144. [ 0.000000] GPIO mapping write: pin = 27, name = bp2ap_usb_rwkup
  145. [ 0.000000] GPIO mapping write: pin = 25, name = cam_avdd_en
  146. [ 0.000000] GPIO mapping write: pin = 98, name = gpio_cam_reset
  147. [ 0.000000] GPIO mapping write: pin = 64, name = gpio_cam_pwdn
  148. [ 0.000000] DT overwrite GPIO Mapping done!
  149. [ 0.000000] GPIO Mapping init done!
  150. [ 0.000000] ram_console: got buffer at 8e000000, size 20000
  151. [ 0.000000] ram_console: found existing buffer, size 114660, start 98240
  152. [ 0.000000] console [ram-1] enabled
  153. [ 0.000000] Modem0 is 0x001e0001
  154. [ 0.000000] mapphone_qsc6085_init_gpio: can't get ipc_o_bp_pshold from device_tree
  155. [ 0.000000] CPCAP: using default bus_num 1
  156. [ 0.000000] cpcap init size = 1
  157. [ 0.000000] CPCAP: Add new reg [156] setting!
  158. [ 0.000000] cpcap init size = 9
  159. [ 0.000000] CPCAP: Overwrite regulator init [6]!
  160. [ 0.000000] CPCAP: Overwrite regulator init [8]!
  161. [ 0.000000] CPCAP: Overwrite regulator init [11]!
  162. [ 0.000000] CPCAP: Overwrite regulator init [13]!
  163. [ 0.000000] CPCAP: Overwrite regulator init [14]!
  164. [ 0.000000] CPCAP: Overwrite regulator init [15]!
  165. [ 0.000000] CPCAP: Overwrite regulator init [18]!
  166. [ 0.000000] CPCAP: Overwrite regulator init [19]!
  167. [ 0.000000] CPCAP: Overwrite regulator init [16]!
  168. [ 0.000000] cpcap init size = 7
  169. [ 0.000000] CPCAP: Overwrite regulator mode [6]!
  170. [ 0.000000] CPCAP: Overwrite regulator mode [8]!
  171. [ 0.000000] CPCAP: Overwrite regulator mode [13]!
  172. [ 0.000000] CPCAP: Overwrite regulator mode [14]!
  173. [ 0.000000] CPCAP: Overwrite regulator mode [15]!
  174. [ 0.000000] CPCAP: Overwrite regulator mode [22]!
  175. [ 0.000000] CPCAP: Overwrite regulator mode [11]!
  176. [ 0.000000] Read property regulator_off_mode error!
  177. [ 0.000000] Read property analog_downlink error!
  178. [ 0.000000] Read property stereo_loudspeaker error!
  179. [ 0.000000] Read property mic3 error!
  180. [ 0.000000] CPCAP: delaying cpcap_usb probe
  181. [ 0.000000] CPCAP: delaying cpcap_usb_det probe
  182. [ 0.000000] CPCAP: delaying cpcap_audio probe
  183. [ 0.000000] CPCAP: delaying cpcap_3mm5 probe
  184. [ 0.000000] CPCAP: delaying bd7885 probe
  185. [ 0.000000] cpcap_leds_init Configuring CPCAP LED drivers
  186. [ 0.000000] CPCAP LED found.
  187. [ 0.000000] type = 0X 210003
  188. [ 0.000000] CPCAP,KPB found.
  189. [ 0.000000] CPCAP: delaying leds-cpcap-kpb probe
  190. [ 0.000000] CPCAP LED found.
  191. [ 0.000000] type = 0X 210002
  192. [ 0.000000] CPCAP,GPIO found.
  193. [ 0.000000] CPCAP: delaying leds-cpcap-gpio probe
  194. [ 0.000000] CPCAP LED found.
  195. [ 0.000000] type = 0X 210005
  196. [ 0.000000] CPCAP,RGB found.
  197. [ 0.000000] CPCAP: delaying leds-cpcap-rgb probe
  198. [ 0.000000] CPCAP: delaying flash-torch probe
  199. [ 0.000000] mapphone_als_init: cann't get lm3530_int from device_tree
  200. [ 0.000000] mapphone_als_init:Initializing
  201. [ 0.000000] mapphone_isl29030_init - opened node /System@0/I2C@0/Proximity@0 from device tree
  202. [ 0.000000] mapphone_isl29030_init - unable to read regulator from device tree
  203. [ 0.000000] adp8870_reset not in device_tree
  204. [ 0.000000] feature_mipi_cam 1
  205. [ 0.000000] cam_avdd_en 25
  206. [ 0.000000] Regulators for device: vcam,vwlan1
  207. [ 0.000000] Adding vcam to camera regulator list
  208. [ 0.000000] Adding vwlan1 to camera regulator list
  209. [ 0.000000] mapphone_camera_init: MIPI camera
  210. [ 0.000000] mapphone_legacy_qtouch_init: Selecting legacy qtouch driver.
  211. [ 0.000000] mapphone_touch_init: Touch init successful.
  212. [ 0.000000] feature_headset_uart_en 0
  213. [ 0.000000] Modem0 is 0x001e0001
  214. [ 0.000000] Setting the Modem Interface num to 4
  215. [ 0.000000] USB Overwrite nLuns 2
  216. [ 0.000000] USB PID overwritten for msc with 0x42b3
  217. [ 0.000000] USB PID overwritten for cdrom with 0x41de
  218. [ 0.000000] USB PID overwritten for msc_adb with 0x42b4
  219. [ 0.000000] USB PID overwritten for eth with 0x41d4
  220. [ 0.000000] USB PID overwritten for mtp with 0x42b6
  221. [ 0.000000] USB PID overwritten for acm with 0x6422
  222. [ 0.000000] USB PID overwritten for eth_adb with 0x41ea
  223. [ 0.000000] USB PID overwritten for acm_eth_mtp with 0x42b1
  224. [ 0.000000] USB PID overwritten for mtp_adb with 0x42b7
  225. [ 0.000000] USB PID overwritten for acm_eth_mtp_adb with 0x42b2
  226. [ 0.000000] USB PID overwritten for acm_eth_adb with 0x41e2
  227. [ 0.000000] USB PID overwritten for msc_eth with 0x41d4
  228. [ 0.000000] USB PID overwritten for msc_adb_eth with 0x41d4
  229. [ 0.000000] USB PID overwritten for charge_only with 0x42b5
  230. [ 0.000000] irq 72: nobody cared (try booting with the "irqpoll" option)
  231. [ 0.000000] [<c003ad34>] (unwind_backtrace+0x0/0xd8) from [<c009fd90>] (__report_bad_irq+0x30/0x8c)
  232. [ 0.000000] [<c009fd90>] (__report_bad_irq+0x30/0x8c) from [<c009ff34>] (note_interrupt+0x148/0x1d0)
  233. [ 0.000000] [<c009ff34>] (note_interrupt+0x148/0x1d0) from [<c00a0a7c>] (handle_level_irq+0xf4/0x178)
  234. [ 0.000000] [<c00a0a7c>] (handle_level_irq+0xf4/0x178) from [<c0035068>] (asm_do_IRQ+0x68/0x84)
  235. [ 0.000000] [<c0035068>] (asm_do_IRQ+0x68/0x84) from [<c0035ac4>] (__irq_svc+0x44/0xa8)
  236. [ 0.000000] Exception stack(0xdec23dd8 to 0xdec23e20)
  237. [ 0.000000] 3dc0: dec23e20 00000001
  238. [ 0.000000] 3de0: dec22000 00000104 dec22000 00000202 00000000 c0612f00 00000002 0000000a
  239. [ 0.000000] 3e00: c0585248 00000000 ffff6a9e dec23e20 c006fab8 c006f9bc 20000153 ffffffff
  240. [ 0.000000] [<c0035ac4>] (__irq_svc+0x44/0xa8) from [<c006f9bc>] (__do_softirq+0x40/0xf8)
  241. [ 0.000000] [<c006f9bc>] (__do_softirq+0x40/0xf8) from [<c006fab8>] (irq_exit+0x44/0xa8)
  242. [ 0.000000] [<c006fab8>] (irq_exit+0x44/0xa8) from [<c003506c>] (asm_do_IRQ+0x6c/0x84)
  243. [ 0.000000] [<c003506c>] (asm_do_IRQ+0x6c/0x84) from [<c0035ac4>] (__irq_svc+0x44/0xa8)
  244. [ 0.000000] Exception stack(0xdec23e70 to 0xdec23eb8)
  245. [ 0.000000] 3e60: c05853b0 c05853b4 60000053 c0585394
  246. [ 0.000000] 3e80: 00000000 00000032 00000047 c0585378 dec23ef3 00000000 3b9aca00 0000000f
  247. [ 0.000000] 3ea0: 0000000c dec23eb8 c006ac4c c006b2ec 60000053 ffffffff
  248. [ 0.000000] [<c0035ac4>] (__irq_svc+0x44/0xa8) from [<c006b2ec>] (vprintk+0x35c/0x3bc)
  249. [ 0.000000] [<c006b2ec>] (vprintk+0x35c/0x3bc) from [<c041d394>] (printk+0x1c/0x28)
  250. [ 0.000000] [<c041d394>] (printk+0x1c/0x28) from [<c0014678>] (usb_pid_mapping_init+0x90/0xe0)
  251. [ 0.000000] [<c0014678>] (usb_pid_mapping_init+0x90/0xe0) from [<c00146e4>] (mapphone_gadget_init+0x1c/0x4c)
  252. [ 0.000000] [<c00146e4>] (mapphone_gadget_init+0x1c/0x4c) from [<c0011008>] (mapphone_init+0xa2c/0xca8)
  253. [ 0.000000] [<c0011008>] (mapphone_init+0xa2c/0xca8) from [<c000b1bc>] (customize_machine+0x18/0x24)
  254. [ 0.000000] [<c000b1bc>] (customize_machine+0x18/0x24) from [<c003537c>] (do_one_initcall+0x5c/0x1b8)
  255. [ 0.000000] [<c003537c>] (do_one_initcall+0x5c/0x1b8) from [<c00083f8>] (kernel_init+0x98/0x110)
  256. [ 0.000000] [<c00083f8>] (kernel_init+0x98/0x110) from [<c003699c>] (kernel_thread_exit+0x0/0x8)
  257. [ 0.000000] handlers:
  258. [ 0.000000] [<c003f61c>] (omap_uart_interrupt+0x0/0x14)
  259. [ 0.000000] Disabling IRQ #72
  260. [ 0.000000] USB PID overwritten for charge_adb with 0x42ba
  261. [ 0.000000] DT overwrite of USB PID's done!
  262. [ 0.000000] SIM device disabled.
  263. [ 0.000000] initcall customize_machine+0x0/0x24 returned 0 after 1182556 usecs
  264. [ 0.000000] calling omap2_init_devices+0x0/0x1ac @ 1
  265. [ 0.000000] omap_init_mbox: platform not supported
  266. [ 0.000000] initcall omap2_init_devices+0x0/0x1ac returned 0 after 7629 usecs
  267. [ 0.000000] calling omap_hs_init+0x0/0x58 @ 1
  268. [ 0.000000] initcall omap_hs_init+0x0/0x58 returned 0 after 0 usecs
  269. [ 0.000000] calling omap2_mcbsp_init+0x0/0x5c @ 1
  270. [ 0.000000] initcall omap2_mcbsp_init+0x0/0x5c returned 0 after 0 usecs
  271. [ 0.000000] calling omap3_pm_early_init+0x0/0x128 @ 1
  272. [ 0.000000] initcall omap3_pm_early_init+0x0/0x128 returned 0 after 0 usecs
  273. [ 0.000000] calling omap2_clk_arch_init+0x0/0xbc @ 1
  274. [ 0.000000] initcall omap2_clk_arch_init+0x0/0xbc returned -22 after 0 usecs
  275. [ 0.000000] initcall omap2_clk_arch_init+0x0/0xbc returned with error code -22
  276. [ 0.000000] calling mapphone_i2c_init+0x0/0xa0 @ 1
  277. [ 0.000000] Enabling MIPI DLI Test
  278. [ 0.000000] I2C-1 devices: qtouch-obp-ts,isl29030_als_ir,lm3530_led
  279. [ 0.000000] qtouch-obp-ts -> I2C bus-1
  280. [ 0.000000] isl29030_als_ir -> I2C bus-1
  281. [ 0.000000] lm3530_led -> I2C bus-1
  282. [ 0.000000] I2C-2 devices: akm8975,kxtf9
  283. [ 0.000000] akm8975 -> I2C bus-2
  284. [ 0.000000] kxtf9 -> I2C bus-2
  285. [ 0.000000] I2C-3 devices: HP_GEN_LENS,ov5650,lm3554_led
  286. [ 0.000000] HP_GEN_LENS -> I2C bus-3
  287. [ 0.000000] ov5650 -> I2C bus-3
  288. [ 0.000000] lm3554_led -> I2C bus-3
  289. [ 0.000000] initcall mapphone_i2c_init+0x0/0xa0 returned 0 after 7629 usecs
  290. [ 0.000000] calling omap_init_clocksource_32k+0x0/0x90 @ 1
  291. [106777.898040] initcall omap_init_clocksource_32k+0x0/0x90 returned 0 after 0 usecs
  292. [106777.898345] calling omap_init_devices+0x0/0x30 @ 1
  293. [106777.900146] initcall omap_init_devices+0x0/0x30 returned 0 after 0 usecs
  294. [106777.900756] calling omap_init_dma+0x0/0x1a8 @ 1
  295. [106777.901306] OMAP DMA hardware revision 5.0
  296. [106777.901733] Reserving DMA channels 0 and 1 for HS ROM code
  297. [106777.902282] initcall omap_init_dma+0x0/0x1a8 returned 0 after 0 usecs
  298. [106777.902587] calling omap_gpio_sysinit+0x0/0x48 @ 1
  299. [106777.904724] initcall omap_gpio_sysinit+0x0/0x48 returned 0 after 0 usecs
  300. [106777.905059] calling omap_init_fb+0x0/0xc @ 1
  301. [106777.906707] initcall omap_init_fb+0x0/0xc returned 0 after 0 usecs
  302. [106777.907043] calling omap_vram_init+0x0/0x44 @ 1
  303. [106777.907592] initcall omap_vram_init+0x0/0x44 returned 0 after 0 usecs
  304. [106777.907897] calling omap_wdt_panic_init+0x0/0x20 @ 1
  305. [106777.908752] initcall omap_wdt_panic_init+0x0/0x20 returned 0 after 0 usecs
  306. [106777.909088] calling topology_init+0x0/0x28 @ 1
  307. [106777.910552] initcall topology_init+0x0/0x28 returned 0 after 0 usecs
  308. [106777.910888] calling omap_register_i2c_bus_cmdline+0x0/0x94 @ 1
  309. [106777.911437] initcall omap_register_i2c_bus_cmdline+0x0/0x94 returned 0 after 0 usecs
  310. [106777.911743] calling param_sysfs_init+0x0/0x1e8 @ 1
  311. [106778.029174] initcall param_sysfs_init+0x0/0x1e8 returned 0 after 114440 usecs
  312. [106778.029785] calling pm_sysrq_init+0x0/0x1c @ 1
  313. [106778.030090] initcall pm_sysrq_init+0x0/0x1c returned 0 after 0 usecs
  314. [106778.030639] calling default_bdi_init+0x0/0xb4 @ 1
  315. [106778.032806] initcall default_bdi_init+0x0/0xb4 returned 0 after 0 usecs
  316. [106778.033966] calling init_bio+0x0/0xe8 @ 1
  317. [106778.034606] bio: create slab <bio-0> at 0
  318. [106778.035003] initcall init_bio+0x0/0xe8 returned 0 after 0 usecs
  319. [106778.035552] calling fsnotify_init+0x0/0xc @ 1
  320. [106778.035858] initcall fsnotify_init+0x0/0xc returned 0 after 0 usecs
  321. [106778.036376] calling fsnotify_notification_init+0x0/0xa0 @ 1
  322. [106778.036834] initcall fsnotify_notification_init+0x0/0xa0 returned 0 after 0 usecs
  323. [106778.037384] calling cryptomgr_init+0x0/0xc @ 1
  324. [106778.037689] initcall cryptomgr_init+0x0/0xc returned 0 after 0 usecs
  325. [106778.038208] calling blk_settings_init+0x0/0x38 @ 1
  326. [106778.038513] initcall blk_settings_init+0x0/0x38 returned 0 after 0 usecs
  327. [106778.039031] calling blk_ioc_init+0x0/0x38 @ 1
  328. [106778.039428] initcall blk_ioc_init+0x0/0x38 returned 0 after 0 usecs
  329. [106778.039978] calling blk_softirq_init+0x0/0x2c @ 1
  330. [106778.040252] initcall blk_softirq_init+0x0/0x2c returned 0 after 0 usecs
  331. [106778.040802] calling blk_iopoll_setup+0x0/0x2c @ 1
  332. [106778.041229] initcall blk_iopoll_setup+0x0/0x2c returned 0 after 0 usecs
  333. [106778.041778] calling genhd_device_init+0x0/0x80 @ 1
  334. [106778.043670] initcall genhd_device_init+0x0/0x80 returned 0 after 0 usecs
  335. [106778.044250] calling fbmem_init+0x0/0xa8 @ 1
  336. [106778.045410] initcall fbmem_init+0x0/0xa8 returned 0 after 0 usecs
  337. [106778.045989] calling cpcap_regulator_init+0x0/0xc @ 1
  338. [106778.047332] initcall cpcap_regulator_init+0x0/0xc returned 0 after 0 usecs
  339. [106778.047912] calling misc_init+0x0/0xb8 @ 1
  340. [106778.049591] initcall misc_init+0x0/0xb8 returned 0 after 7629 usecs
  341. [106778.050170] calling cn_init+0x0/0xa4 @ 1
  342. [106778.050567] initcall cn_init+0x0/0xa4 returned 0 after 0 usecs
  343. [106778.051116] calling serial_omap_init+0x0/0x7c @ 1
  344. [106778.052276] Invalid Console Name
  345. [106778.052825] Invalid console paramter. UART Library Init Failed!
  346. [106778.053100] !!!!!!!! Unable to recongnize Console UART........
  347. [106778.053649] omap-uart.1: ttyS0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART1
  348. [106778.054931] Error requesting GPIO
  349. [106778.055603] Invalid Console Name
  350. [106778.055908] Invalid console paramter. UART Library Init Failed!
  351. [106778.056182] !!!!!!!! Unable to recongnize Console UART........
  352. [106778.057037] omap-uart.2: ttyS1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART2
  353. [106778.058532] omap-uart omap-uart.3: device disabled
  354. [106778.060028] initcall serial_omap_init+0x0/0x7c returned 0 after 7629 usecs
  355. [106778.060577] calling cpcap_init+0x0/0xc @ 1
  356. [106778.061798] initcall cpcap_init+0x0/0xc returned 0 after 0 usecs
  357. [106778.062133] calling cpcap_adc_init+0x0/0xc @ 1
  358. [106778.063690] initcall cpcap_adc_init+0x0/0xc returned 0 after 0 usecs
  359. [106778.064025] calling cpcap_uc_init+0x0/0xc @ 1
  360. [106778.065887] initcall cpcap_uc_init+0x0/0xc returned 0 after 0 usecs
  361. [106778.066223] calling omap2_mcspi_init+0x0/0x64 @ 1
  362. [106778.081542] cpcap-regltr: probe of cpcap-regltr.0 failed with error -22
  363. [106778.083068] cpcap-regltr: probe of cpcap-regltr.1 failed with error -22
  364. [106778.084747] cpcap-regltr: probe of cpcap-regltr.2 failed with error -22
  365. [106778.086486] cpcap-regltr: probe of cpcap-regltr.3 failed with error -22
  366. [106778.089599] regulator: sw5: 5050 mV
  367. [106778.092773] regulator: vusb: 3300 mV
  368. [106778.096557] regulator: vcam: 2900 mV
  369. [106778.100982] regulator: vcsi: 1800 mV
  370. [106778.104705] regulator: vdac: 1800 mV
  371. [106778.108184] regulator: vdig: 1875 mV
  372. [106778.111053] regulator: vfuse: 1500 <--> 3150 mV
  373. [106778.115570] regulator: vhvio: 2775 mV
  374. [106778.120330] regulator: vsdio: 2900 mV
  375. [106778.123992] regulator: vpll: 1800 mV
  376. [106778.127838] regulator: vrf1: 2775 mV
  377. [106778.130981] regulator: vrf2: 2775 mV
  378. [106778.134490] regulator: vrfref: 2775 mV
  379. [106778.137939] regulator: vwlan1: 1800 <--> 1900 mV
  380. [106778.141479] regulator: vwlan2: 3000 mV
  381. [106778.144775] regulator: vsim: 1800 <--> 2900 mV
  382. [106778.147918] regulator: vsimcard: 1800 <--> 2900 mV
  383. [106778.151184] regulator: vvib: 1300 <--> 3000 mV
  384. [106778.155578] regulator: vaudio: 2775 mV normal standby
  385. [106778.159698] cpcap_uc cpcap_uc: firmware: using built-in firmware cpcap/firmware_1_2x.fw
  386. [106778.160308] cpcap_uc cpcap_uc: Loading 714 word(s) at 0x9130
  387. [106778.541320] cpcap_uc cpcap_uc: Loading 1 word(s) at 0x9018
  388. [106778.552185] cpcap_uc cpcap_uc: Loaded Sec SPI Init = 0: 0
  389. [106778.552642] cpcap_uc cpcap_uc: Started macro 4: 0
  390. [106778.565093] cpcap_adc cpcap_adc: CPCAP ADC device probed
  391. [106778.568695] cpcap spi1.0: Probing CPCAP device cpcap_usb
  392. [106778.570373] cpcap spi1.0: Probing CPCAP device cpcap_usb_det
  393. [106778.571838] cpcap spi1.0: Probing CPCAP device cpcap_audio
  394. [106778.573699] cpcap spi1.0: Probing CPCAP device cpcap_3mm5
  395. [106778.575256] cpcap spi1.0: Probing CPCAP device bd7885
  396. [106778.576965] cpcap spi1.0: Probing CPCAP device leds-cpcap-kpb
  397. [106778.578430] cpcap spi1.0: Probing CPCAP device leds-cpcap-gpio
  398. [106778.580474] cpcap spi1.0: Probing CPCAP device leds-cpcap-rgb
  399. [106778.581970] cpcap spi1.0: Probing CPCAP device flash-torch
  400. [106778.588684] initcall omap2_mcspi_init+0x0/0x64 returned 0 after 511169 usecs
  401. [106778.589019] calling cpcap_usb_init+0x0/0xc @ 1
  402. [106778.590270] cpcap_usb cpcap_usb: Initialized CPCAP USB module
  403. [106778.591522] initcall cpcap_usb_init+0x0/0xc returned 0 after 0 usecs
  404. [106778.592102] calling usb_init+0x0/0x150 @ 1
  405. [106778.594665] usbcore: registered new interface driver usbfs
  406. [106778.597686] usbcore: registered new interface driver hub
  407. [106778.599304] usbcore: registered new device driver usb
  408. [106778.599914] initcall usb_init+0x0/0x150 returned 0 after 7629 usecs
  409. [106778.600219] calling bypass_init+0x0/0x98 @ 1
  410. [106778.600494] enter bypass_init
  411. [106778.601196] initcall bypass_init+0x0/0x98 returned 0 after 0 usecs
  412. [106778.601501] calling input_init+0x0/0x154 @ 1
  413. [106778.602996] initcall input_init+0x0/0x154 returned 0 after 0 usecs
  414. [106778.603332] calling rtc_init+0x0/0x78 @ 1
  415. [106778.605102] initcall rtc_init+0x0/0x78 returned 0 after 0 usecs
  416. [106778.605438] calling omap_i2c_init_driver+0x0/0xc @ 1
  417. [106778.606414] i2c_omap i2c_omap.1: bus 1 rev4.0 at 400 kHz
  418. [106778.611175] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
  419. [106778.615478] i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz
  420. [106778.621276] initcall omap_i2c_init_driver+0x0/0xc returned 0 after 15258 usecs
  421. [106778.621856] calling power_supply_class_init+0x0/0x44 @ 1
  422. [106778.623077] initcall power_supply_class_init+0x0/0x44 returned 0 after 0 usecs
  423. [106778.623626] calling cpcap_batt_init+0x0/0xc @ 1
  424. [106778.636444] initcall cpcap_batt_init+0x0/0xc returned 0 after 15258 usecs
  425. [106778.637023] calling mmc_init+0x0/0x94 @ 1
  426. [106778.640411] initcall mmc_init+0x0/0x94 returned 0 after 0 usecs
  427. [106778.640991] calling leds_init+0x0/0x50 @ 1
  428. [106778.642181] initcall leds_init+0x0/0x50 returned 0 after 0 usecs
  429. [106778.643066] calling proto_init+0x0/0xc @ 1
  430. [106778.643463] initcall proto_init+0x0/0xc returned 0 after 0 usecs
  431. [106778.644012] calling net_dev_init+0x0/0x130 @ 1
  432. [106778.646972] initcall net_dev_init+0x0/0x130 returned 0 after 0 usecs
  433. [106778.647552] calling neigh_init+0x0/0x84 @ 1
  434. [106778.647857] initcall neigh_init+0x0/0x84 returned 0 after 0 usecs
  435. [106778.648132] calling fib_rules_init+0x0/0xac @ 1
  436. [106778.648712] initcall fib_rules_init+0x0/0xac returned 0 after 0 usecs
  437. [106778.649017] calling pktsched_init+0x0/0xe4 @ 1
  438. [106778.649597] initcall pktsched_init+0x0/0xe4 returned 0 after 0 usecs
  439. [106778.649902] calling tc_filter_init+0x0/0x54 @ 1
  440. [106778.650787] initcall tc_filter_init+0x0/0x54 returned 0 after 0 usecs
  441. [106778.651092] calling tc_action_init+0x0/0x54 @ 1
  442. [106778.651641] initcall tc_action_init+0x0/0x54 returned 0 after 0 usecs
  443. [106778.651947] calling genl_init+0x0/0x94 @ 1
  444. [106778.652618] initcall genl_init+0x0/0x94 returned 0 after 0 usecs
  445. [106778.652954] calling sysfs_ipv4_init+0x0/0x4c @ 1
  446. [106778.653656] initcall sysfs_ipv4_init+0x0/0x4c returned 0 after 0 usecs
  447. [106778.653961] calling bt_init+0x0/0x5c @ 1
  448. [106778.654479] Bluetooth: Core ver 2.15
  449. [106778.656066] NET: Registered protocol family 31
  450. [106778.656372] Bluetooth: HCI device and connection manager initialized
  451. [106778.656921] Bluetooth: HCI socket layer initialized
  452. [106778.657257] initcall bt_init+0x0/0x5c returned 0 after 0 usecs
  453. [106778.657806] calling wireless_nlevent_init+0x0/0xc @ 1
  454. [106778.658111] initcall wireless_nlevent_init+0x0/0xc returned 0 after 0 usecs
  455. [106778.658935] calling rfkill_init+0x0/0x78 @ 1
  456. [106778.661254] initcall rfkill_init+0x0/0x78 returned 0 after 0 usecs
  457. [106778.661834] calling sysctl_init+0x0/0x4c @ 1
  458. [106778.662170] initcall sysctl_init+0x0/0x4c returned 0 after 0 usecs
  459. [106778.662689] calling activity_stats_init+0x0/0x48 @ 1
  460. [106778.663055] initcall activity_stats_init+0x0/0x48 returned 0 after 0 usecs
  461. [106778.663604] calling alignment_init+0x0/0xe0 @ 1
  462. [106778.663970] initcall alignment_init+0x0/0xe0 returned 0 after 0 usecs
  463. [106778.664520] calling clocksource_done_booting+0x0/0x38 @ 1
  464. [106778.664794] Switching to clocksource 32k_counter
  465. [106778.665374] initcall clocksource_done_booting+0x0/0x38 returned 0 after 29 usecs
  466. [106778.665893] calling init_pipe_fs+0x0/0x50 @ 1
  467. [106778.666870] initcall init_pipe_fs+0x0/0x50 returned 0 after 119 usecs
  468. [106778.667419] calling eventpoll_init+0x0/0xa4 @ 1
  469. [106778.667968] initcall eventpoll_init+0x0/0xa4 returned 0 after 208 usecs
  470. [106778.668518] calling anon_inode_init+0x0/0x11c @ 1
  471. [106778.668914] initcall anon_inode_init+0x0/0x11c returned 0 after 89 usecs
  472. [106778.669464] calling blk_scsi_ioctl_init+0x0/0x160 @ 1
  473. [106778.669769] initcall blk_scsi_ioctl_init+0x0/0x160 returned 0 after 29 usecs
  474. [106778.670318] calling chr_dev_init+0x0/0xc4 @ 1
  475. [106778.679779] initcall chr_dev_init+0x0/0xc4 returned 0 after 8881 usecs
  476. [106778.680358] calling firmware_class_init+0x0/0x6c @ 1
  477. [106778.681915] initcall firmware_class_init+0x0/0x6c returned 0 after 1162 usecs
  478. [106778.682495] calling musb_init+0x0/0x3c @ 1
  479. [106778.682769] musb_hdrc: version 6.0, musb-dma, peripheral, debug=0
  480. [106778.683685] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine (X), bulk split (X), HB-ISO Rx, HB-ISO Tx, SoftConn)
  481. [106778.684234] musb_hdrc: MHDRC RTL version 1.800
  482. [106778.684539] musb_hdrc: setup fifo_mode 4
  483. [106778.684844] musb_hdrc: 28/31 max ep, 15424/16384 memory
  484. [106778.685424] musb_hdrc: USB Peripheral mode controller at fa0ab000 using DMA, IRQ 92
  485. [106778.687347] initcall musb_init+0x0/0x3c returned 0 after 4380 usecs
  486. [106778.687683] calling cpufreq_gov_performance_init+0x0/0xc @ 1
  487. [106778.688262] initcall cpufreq_gov_performance_init+0x0/0xc returned 0 after 29 usecs
  488. [106778.688568] calling sysctl_core_init+0x0/0x38 @ 1
  489. [106778.689544] initcall sysctl_core_init+0x0/0x38 returned 0 after 89 usecs
  490. [106778.689880] calling inet_init+0x0/0x1f8 @ 1
  491. [106778.690856] NET: Registered protocol family 2
  492. [106778.691589] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  493. [106778.693420] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  494. [106778.694427] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  495. [106778.695343] TCP: Hash tables configured (established 16384 bind 16384)
  496. [106778.695892] TCP reno registered
  497. [106778.696655] initcall inet_init+0x0/0x1f8 returned 0 after 6020 usecs
  498. [106778.697326] calling af_unix_init+0x0/0x54 @ 1
  499. [106778.698028] NET: Registered protocol family 1
  500. [106778.698455] initcall af_unix_init+0x0/0x54 returned 0 after 536 usecs
  501. [106778.699005] calling populate_rootfs+0x0/0x264 @ 1
  502. [106778.699920] Trying to unpack rootfs image as initramfs...
  503. [106778.733001] Freeing initrd memory: 144K
  504. [106778.733367] initcall populate_rootfs+0x0/0x264 returned 0 after 33259 usecs
  505. [106778.733917] calling timer_init_sysfs+0x0/0x38 @ 1
  506. [106778.736206] initcall timer_init_sysfs+0x0/0x38 returned 0 after 1847 usecs
  507. [106778.736785] calling leds_init+0x0/0x3c @ 1
  508. [106778.738830] initcall leds_init+0x0/0x3c returned 0 after 1639 usecs
  509. [106778.739410] calling bootinfo_init_module+0x0/0x60 @ 1
  510. [106778.739776] initcall bootinfo_init_module+0x0/0x60 returned 0 after 59 usecs
  511. [106778.740325] calling wakeup_timer_init+0x0/0x98 @ 1
  512. [106778.744415] initcall wakeup_timer_init+0x0/0x98 returned 0 after 3635 usecs
  513. [106778.745025] calling omap2_mbox_init+0x0/0xc @ 1
  514. [106778.746490] initcall omap2_mbox_init+0x0/0xc returned 0 after 1102 usecs
  515. [106778.747070] calling omap2_iommu_init+0x0/0xc @ 1
  516. [106778.747375] initcall omap2_iommu_init+0x0/0xc returned 0 after 29 usecs
  517. [106778.747924] calling omap3_iommu_init+0x0/0xb4 @ 1
  518. [106778.749511] initcall omap3_iommu_init+0x0/0xb4 returned 0 after 1221 usecs
  519. [106778.750122] calling dspbridge_init+0x0/0xa0 @ 1
  520. [106778.750396] dspbridge_init: 600000 bytes @ 81c00000
  521. [106778.752593] initcall dspbridge_init+0x0/0xa0 returned 0 after 2056 usecs
  522. [106778.752929] calling mapphone_init_keypad+0x0/0x394 @ 1
  523. [106778.753509] mapphone_dt_kp_init: Keypad device is ADP5588
  524. [106778.753845] Keypad: using non-dt configuration
  525. [106778.754394] adp5588_reset: ADP5588: RESET_GPIO not in device_tree
  526. [106778.754699] adp5588_reset: ADP5588: RESET asserted
  527. [106778.782714] adp5588_reset: ADP5588: RESET deasserted
  528. [106778.786590] initcall mapphone_init_keypad+0x0/0x394 returned 0 after 32275 usecs
  529. [106778.787170] calling mapphone_wifi_init+0x0/0xa8 @ 1
  530. [106778.787475] mapphone_wifi_init: start
  531. [106778.789337] initcall mapphone_wifi_init+0x0/0xa8 returned 0 after 1698 usecs
  532. [106778.789672] calling mapphone_init_gpiodev+0x0/0x264 @ 1
  533. [106778.790222] gpio_dev_size = 4
  534. [106778.790863] GPIODev: Overwrite device [gps_reset] setting!
  535. [106778.791168] GPIODev: Overwrite device [gps_standby] setting!
  536. [106778.791717] GPIODev: Add new device [bt_wake] setting!
  537. [106778.791992] GPIODev: Add new device [bt_hostwake] setting!
  538. [106778.793914] initcall mapphone_init_gpiodev+0x0/0x264 returned 0 after 3546 usecs
  539. [106778.794494] calling init_trace_clock+0x0/0xd0 @ 1
  540. [106778.794799] LTTng will clear ccnt top bit every 458 jiffies.
  541. [106778.800628] initcall init_trace_clock+0x0/0xd0 returned 0 after 5662 usecs
  542. [106778.800964] calling omap_iommu_init+0x0/0x5c @ 1
  543. [106778.802215] omap-iommu omap-iommu.0: isp registered
  544. [106778.803649] initcall omap_iommu_init+0x0/0x5c returned 0 after 2026 usecs
  545. [106778.804229] calling iovmm_init+0x0/0x40 @ 1
  546. [106778.804718] initcall iovmm_init+0x0/0x40 returned 0 after 149 usecs
  547. [106778.805267] calling omap_mbox_init+0x0/0x8 @ 1
  548. [106778.805572] initcall omap_mbox_init+0x0/0x8 returned 0 after 0 usecs
  549. [106778.806335] calling init_sched_debug_procfs+0x0/0x44 @ 1
  550. [106778.806732] initcall init_sched_debug_procfs+0x0/0x44 returned 0 after 59 usecs
  551. [106778.807281] calling proc_schedstat_init+0x0/0x3c @ 1
  552. [106778.807586] initcall proc_schedstat_init+0x0/0x3c returned 0 after 29 usecs
  553. [106778.808135] calling proc_execdomains_init+0x0/0x30 @ 1
  554. [106778.808441] initcall proc_execdomains_init+0x0/0x30 returned 0 after 29 usecs
  555. [106778.808990] calling ioresources_init+0x0/0x50 @ 1
  556. [106778.809326] initcall ioresources_init+0x0/0x50 returned 0 after 29 usecs
  557. [106778.809844] calling uid_cache_init+0x0/0xcc @ 1
  558. [106778.810302] initcall uid_cache_init+0x0/0xcc returned 0 after 149 usecs
  559. [106778.810821] calling init_posix_timers+0x0/0x180 @ 1
  560. [106778.811248] initcall init_posix_timers+0x0/0x180 returned 0 after 89 usecs
  561. [106778.811798] calling init_posix_cpu_timers+0x0/0x110 @ 1
  562. [106778.812103] initcall init_posix_cpu_timers+0x0/0x110 returned 0 after 0 usecs
  563. [106778.812622] calling nsproxy_cache_init+0x0/0x38 @ 1
  564. [106778.813293] initcall nsproxy_cache_init+0x0/0x38 returned 0 after 119 usecs
  565. [106778.813598] calling timekeeping_init_device+0x0/0x28 @ 1
  566. [106778.815856] initcall timekeeping_init_device+0x0/0x28 returned 0 after 1519 usecs
  567. [106778.816223] calling init_clocksource_sysfs+0x0/0x50 @ 1
  568. [106778.818481] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 1639 usecs
  569. [106778.818817] calling init_timer_list_procfs+0x0/0x38 @ 1
  570. [106778.819427] initcall init_timer_list_procfs+0x0/0x38 returned 0 after 59 usecs
  571. [106778.819976] calling futex_init+0x0/0x78 @ 1
  572. [106778.820312] initcall futex_init+0x0/0x78 returned 0 after 29 usecs
  573. [106778.820587] calling proc_modules_init+0x0/0x30 @ 1
  574. [106778.820922] initcall proc_modules_init+0x0/0x30 returned 0 after 29 usecs
  575. [106778.821472] calling kallsyms_init+0x0/0x30 @ 1
  576. [106778.822082] initcall kallsyms_init+0x0/0x30 returned 0 after 59 usecs
  577. [106778.822631] calling android_power_init+0x0/0x64 @ 1
  578. [106778.823028] initcall android_power_init+0x0/0x64 returned 0 after 59 usecs
  579. [106778.823577] calling hung_task_init+0x0/0x54 @ 1
  580. [106778.824401] initcall hung_task_init+0x0/0x54 returned 0 after 506 usecs
  581. [106778.824981] calling utsname_sysctl_init+0x0/0x18 @ 1
  582. [106778.825317] initcall utsname_sysctl_init+0x0/0x18 returned 0 after 29 usecs
  583. [106778.825836] calling init_per_zone_wmark_min+0x0/0x68 @ 1
  584. [106778.850097] initcall init_per_zone_wmark_min+0x0/0x68 returned 0 after 23335 usecs
  585. [106778.850646] calling kswapd_init+0x0/0x18 @ 1
  586. [106778.851379] initcall kswapd_init+0x0/0x18 returned 0 after 417 usecs
  587. [106778.851959] calling setup_vmstat+0x0/0x88 @ 1
  588. [106778.852355] initcall setup_vmstat+0x0/0x88 returned 0 after 89 usecs
  589. [106778.852905] calling mm_sysfs_init+0x0/0x3c @ 1
  590. [106778.853515] initcall mm_sysfs_init+0x0/0x3c returned 0 after 89 usecs
  591. [106778.854064] calling proc_vmalloc_init+0x0/0x30 @ 1
  592. [106778.854431] initcall proc_vmalloc_init+0x0/0x30 returned 0 after 29 usecs
  593. [106778.854980] calling ashmem_init+0x0/0xac @ 1
  594. [106778.856628] ashmem: initialized
  595. [106778.857025] initcall ashmem_init+0x0/0xac returned 0 after 1668 usecs
  596. [106778.857543] calling slab_proc_init+0x0/0x30 @ 1
  597. [106778.857910] initcall slab_proc_init+0x0/0x30 returned 0 after 59 usecs
  598. [106778.858459] calling cpucache_init+0x0/0x14 @ 1
  599. [106778.858764] initcall cpucache_init+0x0/0x14 returned 0 after 29 usecs
  600. [106778.859313] calling fasync_init+0x0/0x38 @ 1
  601. [106778.859771] initcall fasync_init+0x0/0x38 returned 0 after 149 usecs
  602. [106778.860321] calling proc_filesystems_init+0x0/0x30 @ 1
  603. [106778.860656] initcall proc_filesystems_init+0x0/0x30 returned 0 after 29 usecs
  604. [106778.861419] calling dnotify_init+0x0/0x84 @ 1
  605. [106778.862213] initcall dnotify_init+0x0/0x84 returned 0 after 208 usecs
  606. [106778.862518] calling inotify_setup+0x0/0x18 @ 1
  607. [106778.862792] initcall inotify_setup+0x0/0x18 returned 0 after 0 usecs
  608. [106778.863342] calling inotify_user_setup+0x0/0xb4 @ 1
  609. [106778.864166] initcall inotify_user_setup+0x0/0xb4 returned 0 after 268 usecs
  610. [106778.864501] calling aio_setup+0x0/0x7c @ 1
  611. [106778.865692] initcall aio_setup+0x0/0x7c returned 0 after 625 usecs
  612. [106778.866027] calling proc_locks_init+0x0/0x30 @ 1
  613. [106778.866394] initcall proc_locks_init+0x0/0x30 returned 0 after 59 usecs
  614. [106778.866943] calling init_mbcache+0x0/0x18 @ 1
  615. [106778.867248] initcall init_mbcache+0x0/0x18 returned 0 after 0 usecs
  616. [106778.867767] calling dquot_init+0x0/0xe4 @ 1
  617. [106778.868072] VFS: Disk quotas dquot_6.5.2
  618. [106778.869018] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  619. [106778.869384] initcall dquot_init+0x0/0xe4 returned 0 after 1281 usecs
  620. [106778.869934] calling init_v2_quota_format+0x0/0xc @ 1
  621. [106778.870239] initcall init_v2_quota_format+0x0/0xc returned 0 after 0 usecs
  622. [106778.870788] calling proc_cmdline_init+0x0/0x30 @ 1
  623. [106778.871124] initcall proc_cmdline_init+0x0/0x30 returned 0 after 29 usecs
  624. [106778.871673] calling proc_cpuinfo_init+0x0/0x30 @ 1
  625. [106778.872009] initcall proc_cpuinfo_init+0x0/0x30 returned 0 after 29 usecs
  626. [106778.872528] calling proc_devices_init+0x0/0x30 @ 1
  627. [106778.873077] initcall proc_devices_init+0x0/0x30 returned 0 after 29 usecs
  628. [106778.873382] calling proc_interrupts_init+0x0/0x30 @ 1
  629. [106778.873931] initcall proc_interrupts_init+0x0/0x30 returned 0 after 29 usecs
  630. [106778.874237] calling proc_loadavg_init+0x0/0x30 @ 1
  631. [106778.874786] initcall proc_loadavg_init+0x0/0x30 returned 0 after 29 usecs
  632. [106778.875091] calling proc_meminfo_init+0x0/0x30 @ 1
  633. [106778.875640] initcall proc_meminfo_init+0x0/0x30 returned 0 after 0 usecs
  634. [106778.875946] calling proc_stat_init+0x0/0x30 @ 1
  635. [106778.876647] initcall proc_stat_init+0x0/0x30 returned 0 after 29 usecs
  636. [106778.876953] calling proc_uptime_init+0x0/0x30 @ 1
  637. [106778.877532] initcall proc_uptime_init+0x0/0x30 returned 0 after 29 usecs
  638. [106778.877838] calling proc_version_init+0x0/0x30 @ 1
  639. [106778.878387] initcall proc_version_init+0x0/0x30 returned 0 after 0 usecs
  640. [106778.878692] calling proc_softirqs_init+0x0/0x30 @ 1
  641. [106778.879272] initcall proc_softirqs_init+0x0/0x30 returned 0 after 29 usecs
  642. [106778.879577] calling proc_kmsg_init+0x0/0x30 @ 1
  643. [106778.880157] initcall proc_kmsg_init+0x0/0x30 returned 0 after 29 usecs
  644. [106778.880432] calling proc_page_init+0x0/0x50 @ 1
  645. [106778.881011] initcall proc_page_init+0x0/0x50 returned 0 after 29 usecs
  646. [106778.881317] calling proc_socinfo_init+0x0/0x48 @ 1
  647. [106778.881866] initcall proc_socinfo_init+0x0/0x48 returned 0 after 29 usecs
  648. [106778.882171] calling init_devpts_fs+0x0/0x50 @ 1
  649. [106778.882568] initcall init_devpts_fs+0x0/0x50 returned 0 after 89 usecs
  650. [106778.882873] calling init_ext3_fs+0x0/0x7c @ 1
  651. [106778.883514] initcall init_ext3_fs+0x0/0x7c returned 0 after 298 usecs
  652. [106778.883819] calling journal_init+0x0/0xa8 @ 1
  653. [106778.885162] initcall journal_init+0x0/0xa8 returned 0 after 417 usecs
  654. [106778.885467] calling init_ramfs_fs+0x0/0xc @ 1
  655. [106778.886047] initcall init_ramfs_fs+0x0/0xc returned 0 after 29 usecs
  656. [106778.886352] calling init_fat_fs+0x0/0x58 @ 1
  657. [106778.887115] initcall init_fat_fs+0x0/0x58 returned 0 after 238 usecs
  658. [106778.887420] calling init_vfat_fs+0x0/0xc @ 1
  659. [106778.887969] initcall init_vfat_fs+0x0/0xc returned 0 after 29 usecs
  660. [106778.888275] calling init_msdos_fs+0x0/0xc @ 1
  661. [106778.888824] initcall init_msdos_fs+0x0/0xc returned 0 after 0 usecs
  662. [106778.889129] calling ecryptfs_init+0x0/0x1c0 @ 1
  663. [106778.892791] initcall ecryptfs_init+0x0/0x1c0 returned 0 after 2980 usecs
  664. [106778.893127] calling init_nls_cp437+0x0/0xc @ 1
  665. [106778.893676] initcall init_nls_cp437+0x0/0xc returned 0 after 0 usecs
  666. [106778.893981] calling init_nls_iso8859_1+0x0/0xc @ 1
  667. [106778.894500] initcall init_nls_iso8859_1+0x0/0xc returned 0 after 0 usecs
  668. [106778.894805] calling init_yaffs_fs+0x0/0xec @ 1
  669. [106778.895324] yaffs Jan 3 2014 16:17:57 Installing.
  670. [106778.895751] initcall init_yaffs_fs+0x0/0xec returned 0 after 357 usecs
  671. [106778.896270] calling ipc_init+0x0/0x24 @ 1
  672. [106778.896606] msgmni has been set to 950
  673. [106778.896972] initcall ipc_init+0x0/0x24 returned 0 after 387 usecs
  674. [106778.897491] calling ipc_sysctl_init+0x0/0x18 @ 1
  675. [106778.897827] initcall ipc_sysctl_init+0x0/0x18 returned 0 after 29 usecs
  676. [106778.898376] calling key_proc_init+0x0/0x74 @ 1
  677. [106778.898712] initcall key_proc_init+0x0/0x74 returned 0 after 29 usecs
  678. [106778.899261] calling crypto_wq_init+0x0/0x48 @ 1
  679. [106778.900329] initcall crypto_wq_init+0x0/0x48 returned 0 after 715 usecs
  680. [106778.900878] calling crypto_algapi_init+0x0/0x10 @ 1
  681. [106778.901275] initcall crypto_algapi_init+0x0/0x10 returned 0 after 59 usecs
  682. [106778.901824] calling skcipher_module_init+0x0/0x1c @ 1
  683. [106778.902343] initcall skcipher_module_init+0x0/0x1c returned 0 after 0 usecs
  684. [106778.902648] calling chainiv_module_init+0x0/0xc @ 1
  685. [106778.903198] initcall chainiv_module_init+0x0/0xc returned 0 after 0 usecs
  686. [106778.903503] calling eseqiv_module_init+0x0/0xc @ 1
  687. [106778.904052] initcall eseqiv_module_init+0x0/0xc returned 0 after 0 usecs
  688. [106778.904327] calling hmac_module_init+0x0/0xc @ 1
  689. [106778.904876] initcall hmac_module_init+0x0/0xc returned 0 after 29 usecs
  690. [106778.905181] calling crypto_null_mod_init+0x0/0x78 @ 1
  691. [106778.906127] alg: No test for cipher_null (cipher_null-generic)
  692. [106778.906951] alg: No test for ecb(cipher_null) (ecb-cipher_null)
  693. [106778.908264] alg: No test for digest_null (digest_null-generic)
  694. [106778.909118] alg: No test for compress_null (compress_null-generic)
  695. [106778.909820] initcall crypto_null_mod_init+0x0/0x78 returned 0 after 3963 usecs
  696. [106778.910369] calling md5_mod_init+0x0/0xc @ 1
  697. [106778.911560] initcall md5_mod_init+0x0/0xc returned 0 after 834 usecs
  698. [106778.911895] calling sha1_generic_mod_init+0x0/0xc @ 1
  699. [106778.913238] initcall sha1_generic_mod_init+0x0/0xc returned 0 after 745 usecs
  700. [106778.913818] calling crypto_ecb_module_init+0x0/0xc @ 1
  701. [106778.914154] initcall crypto_ecb_module_init+0x0/0xc returned 0 after 0 usecs
  702. [106778.914672] calling crypto_cbc_module_init+0x0/0xc @ 1
  703. [106778.915008] initcall crypto_cbc_module_init+0x0/0xc returned 0 after 0 usecs
  704. [106778.915771] calling des_generic_mod_init+0x0/0x3c @ 1
  705. [106778.917907] initcall des_generic_mod_init+0x0/0x3c returned 0 after 1728 usecs
  706. [106778.918487] calling twofish_mod_init+0x0/0xc @ 1
  707. [106778.920196] initcall twofish_mod_init+0x0/0xc returned 0 after 1311 usecs
  708. [106778.920776] calling aes_init+0x0/0xc @ 1
  709. [106778.922180] initcall aes_init+0x0/0xc returned 0 after 1013 usecs
  710. [106778.922729] calling arc4_init+0x0/0xc @ 1
  711. [106778.924316] initcall arc4_init+0x0/0xc returned 0 after 1192 usecs
  712. [106778.924896] calling deflate_mod_init+0x0/0xc @ 1
  713. [106778.927978] initcall deflate_mod_init+0x0/0xc returned 0 after 2652 usecs
  714. [106778.928558] calling crc32c_mod_init+0x0/0xc @ 1
  715. [106778.929840] initcall crc32c_mod_init+0x0/0xc returned 0 after 894 usecs
  716. [106778.930419] calling crypto_authenc_module_init+0x0/0xc @ 1
  717. [106778.930725] initcall crypto_authenc_module_init+0x0/0xc returned 0 after 29 usecs
  718. [106778.931518] calling krng_mod_init+0x0/0xc @ 1
  719. [106778.932403] alg: No test for stdrng (krng)
  720. [106778.933105] initcall krng_mod_init+0x0/0xc returned 0 after 1192 usecs
  721. [106778.933441] calling proc_genhd_init+0x0/0x50 @ 1
  722. [106778.934082] initcall proc_genhd_init+0x0/0x50 returned 0 after 119 usecs
  723. [106778.934387] calling noop_init+0x0/0x18 @ 1
  724. [106778.934906] io scheduler noop registered
  725. [106778.935211] initcall noop_init+0x0/0x18 returned 0 after 268 usecs
  726. [106778.935760] calling cfq_init+0x0/0xac @ 1
  727. [106778.936370] io scheduler cfq registered (default)
  728. [106778.936706] initcall cfq_init+0x0/0xac returned 0 after 596 usecs
  729. [106778.937225] calling libcrc32c_mod_init+0x0/0x38 @ 1
  730. [106778.937561] initcall libcrc32c_mod_init+0x0/0x38 returned 0 after 29 usecs
  731. [106778.938110] calling init_kmp+0x0/0xc @ 1
  732. [106778.938415] initcall init_kmp+0x0/0xc returned 0 after 0 usecs
  733. [106778.939208] calling init_bm+0x0/0xc @ 1
  734. [106778.939544] initcall init_bm+0x0/0xc returned 0 after 0 usecs
  735. [106778.940063] calling init_fsm+0x0/0xc @ 1
  736. [106778.940368] initcall init_fsm+0x0/0xc returned 0 after 0 usecs
  737. [106778.940887] calling platform_lcd_init+0x0/0xc @ 1
  738. [106778.942535] initcall platform_lcd_init+0x0/0xc returned 0 after 1281 usecs
  739. [106778.943084] calling genericbl_init+0x0/0xc @ 1
  740. [106778.944488] initcall genericbl_init+0x0/0xc returned 0 after 1013 usecs
  741. [106778.945068] calling adp8870_init+0x0/0x10 @ 1
  742. [106778.946380] initcall adp8870_init+0x0/0x10 returned 0 after 923 usecs
  743. [106778.947174] calling omap_panel_init+0x0/0x38 @ 1
  744. [106778.949829] initcall omap_panel_init+0x0/0x38 returned 0 after 2205 usecs
  745. [106778.950378] calling mapphone_panel_init+0x0/0x28 @ 1
  746. [106778.951660] initcall mapphone_panel_init+0x0/0x28 returned 0 after 894 usecs
  747. [106778.952239] calling mapphone_hdtv_panel_init+0x0/0x18 @ 1
  748. [106778.953491] initcall mapphone_hdtv_panel_init+0x0/0x18 returned 0 after 894 usecs
  749. [106778.954071] calling rand_initialize+0x0/0x2c @ 1
  750. [106778.954833] initcall rand_initialize+0x0/0x2c returned 0 after 447 usecs
  751. [106778.955413] calling tty_init+0x0/0xf8 @ 1
  752. [106778.958007] initcall tty_init+0x0/0xf8 returned 0 after 2205 usecs
  753. [106778.958587] calling pty_init+0x0/0x2a8 @ 1
  754. [106778.960144] initcall pty_init+0x0/0x2a8 returned 0 after 1192 usecs
  755. [106778.960723] calling sysrq_init+0x0/0x30 @ 1
  756. [106778.961120] initcall sysrq_init+0x0/0x30 returned 0 after 89 usecs
  757. [106778.961669] calling gpio_device_init+0x0/0xc @ 1
  758. [106778.971191] GPIODev init successfully
  759. [106778.972686] initcall gpio_device_init+0x0/0xc returned 0 after 10401 usecs
  760. [106778.973022] calling cn_proc_init+0x0/0x3c @ 1
  761. [106778.973571] initcall cn_proc_init+0x0/0x3c returned 0 after 0 usecs
  762. [106778.973876] calling brd_init+0x0/0x194 @ 1
  763. [106779.015777] brd: module loaded
  764. [106779.016387] initcall brd_init+0x0/0x194 returned 0 after 41186 usecs
  765. [106779.016693] calling loop_init+0x0/0x178 @ 1
  766. [106779.039154] loop: module loaded
  767. [106779.039550] initcall loop_init+0x0/0x178 returned 0 after 21427 usecs
  768. [106779.040069] calling pmem_init+0x0/0xc @ 1
  769. [106779.041961] initcall pmem_init+0x0/0xc returned 0 after 1490 usecs
  770. [106779.042297] calling uid_stat_init+0x0/0x40 @ 1
  771. [106779.042938] initcall uid_stat_init+0x0/0x40 returned 0 after 89 usecs
  772. [106779.043243] calling wl127x_rfkill_init+0x0/0xc @ 1
  773. [106779.097381] initcall wl127x_rfkill_init+0x0/0xc returned 0 after 52332 usecs
  774. [106779.097961] calling apanic_init+0x0/0x84 @ 1
  775. [106779.098297] Android kernel panic handler initialized (bind=kpanic)
  776. [106779.098602] initcall apanic_init+0x0/0x84 returned 0 after 327 usecs
  777. [106779.099121] calling clock_32k_init+0x0/0x5c @ 1
  778. [106779.102966] initcall clock_32k_init+0x0/0x5c returned 0 after 3427 usecs
  779. [106779.103729] calling akm8973_init+0x0/0x10 @ 1
  780. [106779.105102] initcall akm8973_init+0x0/0x10 returned 0 after 983 usecs
  781. [106779.105682] calling akm8975_init+0x0/0x24 @ 1
  782. [106779.105957] AK8975 compass driver: init
  783. [106779.108367] input: compass as /devices/virtual/input/input0
  784. [106779.112182] initcall akm8975_init+0x0/0x24 returned 0 after 5990 usecs
  785. [106779.112731] calling lis331dlh_init+0x0/0x24 @ 1
  786. [106779.113037] <6>LIS331DLH accelerometer driver
  787. [106779.114624] initcall lis331dlh_init+0x0/0x24 returned 0 after 1490 usecs
  788. [106779.114929] calling kxtf9_init+0x0/0x24 @ 1
  789. [106779.115478] kxtf9 accelerometer driver
  790. [106779.260742] input: accelerometer as /devices/virtual/input/input1
  791. [106779.262786] kxtf9 2-000f: kxtf9 probed
  792. [106779.264129] initcall kxtf9_init+0x0/0x24 returned 0 after 145107 usecs
  793. [106779.264465] calling mdm_ctrl_os_init+0x0/0x28 @ 1
  794. [106779.266815] mdm_ctrl_probe: Loaded mdm_ctrl device driver
  795. [106779.268463] initcall mdm_ctrl_os_init+0x0/0x28 returned 0 after 3337 usecs
  796. [106779.269042] calling mux_init+0x0/0x190 @ 1
  797. [106779.287200] ts27010 mux registered
  798. [106779.287811] initcall mux_init+0x0/0x190 returned 0 after 18000 usecs
  799. [106779.288116] calling vib_gpio_init+0x0/0xc @ 1
  800. [106779.292419] initcall vib_gpio_init+0x0/0xc returned 0 after 3606 usecs
  801. [106779.292755] calling vib_pwm_init+0x0/0x20 @ 1
  802. [106779.293273] vib-pwm: vib_pwm_init
  803. [106779.294769] initcall vib_pwm_init+0x0/0x20 returned 0 after 1370 usecs
  804. [106779.295349] calling apanic_mmc_init+0x0/0xc4 @ 1
  805. [106779.295715] Android kernel panic mmc handler initialized
  806. [106779.296051] initcall apanic_mmc_init+0x0/0xc4 returned 0 after 387 usecs
  807. [106779.296630] calling SCXLNXDeviceRegister+0x0/0x28c @ 1
  808. [106779.301116] initcall SCXLNXDeviceRegister+0x0/0x28c returned 0 after 4023 usecs
  809. [106779.301696] calling syspanicInit+0x0/0x1d8 @ 1
  810. [106779.304199] Syspanic cannot get wrigley mbox
  811. [106779.304534] Loaded SysPanic device driver
  812. [106779.304962] initcall syspanicInit+0x0/0x1d8 returned 0 after 2622 usecs
  813. [106779.305511] calling tcmd_init+0x0/0x48 @ 1
  814. [106779.307250] tcmd probe
  815. [106779.307647] initcall tcmd_init+0x0/0x48 returned 0 after 1758 usecs
  816. [106779.308166] calling omap_device_type_init+0x0/0x9c @ 1
  817. [106779.309967] initcall omap_device_type_init+0x0/0x9c returned 0 after 1162 usecs
  818. [106779.310302] calling cpcap_key_init+0x0/0xc @ 1
  819. [106779.312530] input: cpcap-key as /devices/virtual/input/input2
  820. [106779.312866] cpcap_key cpcap_key: CPCAP key device probed
  821. [106779.314727] initcall cpcap_key_init+0x0/0xc returned 0 after 3755 usecs
  822. [106779.315063] calling cpcap_3mm5_init+0x0/0xc @ 1
  823. [106779.317962] regulator_check_voltage: operation not allowed for vaudio
  824. [106779.320312] cpcap spi1.0: Headset key event: old=0, new=0
  825. [106779.321044] cpcap spi1.0: New headset state: 0
  826. [106779.322662] initcall cpcap_3mm5_init+0x0/0xc returned 0 after 6824 usecs
  827. [106779.323211] calling init_mtd+0x0/0x68 @ 1
  828. [106779.324554] initcall init_mtd+0x0/0x68 returned 0 after 983 usecs
  829. [106779.325134] calling cmdline_parser_init+0x0/0xc @ 1
  830. [106779.325439] initcall cmdline_parser_init+0x0/0xc returned 0 after 0 usecs
  831. [106779.325988] calling init_mtdchar+0x0/0x48 @ 1
  832. [106779.326324] initcall init_mtdchar+0x0/0x48 returned 0 after 29 usecs
  833. [106779.326873] calling init_mtdblock+0x0/0x2c @ 1
  834. [106779.327819] initcall init_mtdblock+0x0/0x2c returned 0 after 596 usecs
  835. [106779.328369] calling cfi_probe_init+0x0/0x18 @ 1
  836. [106779.328674] initcall cfi_probe_init+0x0/0x18 returned 0 after 29 usecs
  837. [106779.329223] calling nand_base_init+0x0/0x8 @ 1
  838. [106779.329498] initcall nand_base_init+0x0/0x8 returned 0 after 0 usecs
  839. [106779.330352] calling omap_nand_init+0x0/0x28 @ 1
  840. [106779.330657] omap2-nand driver initializing
  841. [106779.332244] initcall omap_nand_init+0x0/0x28 returned 0 after 1490 usecs
  842. [106779.332824] calling net_olddevs_init+0x0/0xc0 @ 1
  843. [106779.333160] initcall net_olddevs_init+0x0/0xc0 returned 0 after 29 usecs
  844. [106779.333709] calling ppp_init+0x0/0xf0 @ 1
  845. [106779.333984] PPP generic driver version 2.4.2
  846. [106779.336517] initcall ppp_init+0x0/0xf0 returned 0 after 2384 usecs
  847. [106779.336853] calling ppp_async_init+0x0/0x34 @ 1
  848. [106779.337677] initcall ppp_async_init+0x0/0x34 returned 0 after 0 usecs
  849. [106779.338012] calling deflate_init+0x0/0x38 @ 1
  850. [106779.338531] PPP Deflate Compression module registered
  851. [106779.338836] initcall deflate_init+0x0/0x38 returned 0 after 298 usecs
  852. [106779.339355] calling bsdcomp_init+0x0/0x2c @ 1
  853. [106779.339660] PPP BSD Compression module registered
  854. [106779.339965] initcall bsdcomp_init+0x0/0x2c returned 0 after 298 usecs
  855. [106779.340240] calling ppp_mppe_init+0x0/0xc0 @ 1
  856. [106779.344146] PPP MPPE Compression module registered
  857. [106779.344787] initcall ppp_mppe_init+0x0/0xc0 returned 0 after 4112 usecs
  858. [106779.345611] calling pppox_init+0x0/0xc @ 1
  859. [106779.345916] NET: Registered protocol family 24
  860. [106779.346221] initcall pppox_init+0x0/0xc returned 0 after 268 usecs
  861. [106779.346771] calling pppolac_init+0x0/0x5c @ 1
  862. [106779.347076] initcall pppolac_init+0x0/0x5c returned 0 after 0 usecs
  863. [106779.347595] calling pppopns_init+0x0/0x5c @ 1
  864. [106779.347900] initcall pppopns_init+0x0/0x5c returned 0 after 0 usecs
  865. [106779.348419] calling tun_init+0x0/0x8c @ 1
  866. [106779.348693] tun: Universal TUN/TAP device driver, 1.6
  867. [106779.349212] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  868. [106779.350891] initcall tun_init+0x0/0x8c returned 0 after 2086 usecs
  869. [106779.351470] calling mon_init+0x0/0xec @ 1
  870. [106779.351745] usbmon: debugfs is not available
  871. [106779.352050] initcall mon_init+0x0/0xec returned -19 after 268 usecs
  872. [106779.352569] calling ehci_hcd_init+0x0/0x9c @ 1
  873. [106779.352844] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  874. [106779.354980] initcall ehci_hcd_init+0x0/0x9c returned 0 after 2026 usecs
  875. [106779.355560] calling ohci_hcd_mod_init+0x0/0x78 @ 1
  876. [106779.355865] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  877. [106779.356933] ohci ohci.0: OMAP OHCI
  878. [106779.357482] ohci ohci.0: new USB bus registered, assigned bus number 1
  879. [106779.358001] ohci ohci.0: irq 76, io mem 0x48064400
  880. [106779.437438] usb usb1: configuration #1 chosen from 1 choice
  881. [106779.439300] hub 1-0:1.0: USB hub found
  882. [106779.440032] hub 1-0:1.0: 3 ports detected
  883. [106779.443176] initcall ohci_hcd_mod_init+0x0/0x78 returned 0 after 85204 usecs
  884. [106779.443756] calling acm_init+0x0/0x100 @ 1
  885. [106779.445129] usbcore: registered new interface driver cdc_acm
  886. [106779.445739] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
  887. [106779.446105] initcall acm_init+0x0/0x100 returned 0 after 1966 usecs
  888. [106779.446624] calling usb_serial_init+0x0/0x1f4 @ 1
  889. [106779.449523] usbcore: registered new interface driver usbserial
  890. [106779.450103] usbserial: USB Serial Driver core
  891. [106779.450439] initcall usb_serial_init+0x0/0x1f4 returned 0 after 3010 usecs
  892. [106779.450988] calling moto_init+0x0/0x48 @ 1
  893. [106779.452209] USB Serial support registered for moto-modem
  894. [106779.453765] usbcore: registered new interface driver moto-modem
  895. [106779.454162] initcall moto_init+0x0/0x48 returned 0 after 2771 usecs
  896. [106779.454986] calling modem_init+0x0/0x48 @ 1
  897. [106779.456268] USB Serial support registered for QSC 6085 Modem Driver
  898. [106779.457824] usbcore: registered new interface driver cdma-modem
  899. [106779.458221] initcall modem_init+0x0/0x48 returned 0 after 2831 usecs
  900. [106779.458770] calling moto_flashqsc_init+0x0/0x48 @ 1
  901. [106779.459991] USB Serial support registered for moto-flashqsc
  902. [106779.461547] usbcore: registered new interface driver moto-flashqsc
  903. [106779.461944] initcall moto_flashqsc_init+0x0/0x48 returned 0 after 2771 usecs
  904. [106779.462768] calling cbp_init+0x0/0x58 @ 1
  905. [106779.464080] USB Serial support registered for VIA-Telecom AP/CP USB Connection
  906. [106779.465637] usbcore: registered new interface driver via-cbp
  907. [106779.466217] enter bypass_register
  908. [106779.466552] initcall cbp_init+0x0/0x58 returned 0 after 3337 usecs
  909. [106779.466857] calling usb_ipc_init+0x0/0x64 @ 1
  910. [106779.468780] usbcore: registered new interface driver usb_ipc_data
  911. [106779.469207] initcall usb_ipc_init+0x0/0x64 returned 0 after 1728 usecs
  912. [106779.469757] calling init+0x0/0xf8 @ 1
  913. [106779.470031] android init
  914. [106779.470886] android_probe pdata: c0582ee8
  915. [106779.472412] android_bind
  916. [106779.472747] android_bind_config
  917. [106779.474090] android_usb gadget: android_usb ready
  918. [106779.476928] initcall init+0x0/0xf8 returned 0 after 6645 usecs
  919. [106779.477264] calling init+0x0/0x24 @ 1
  920. [106779.477783] f_usbnet init
  921. [106779.478363] android_register_function usbnet
  922. [106779.478698] initcall init+0x0/0x24 returned 0 after 864 usecs
  923. [106779.479248] calling init+0x0/0x24 @ 1
  924. [106779.479522] f_adb init
  925. [106779.479797] android_register_function adb
  926. [106779.480316] initcall init+0x0/0x24 returned 0 after 774 usecs
  927. [106779.480621] calling init+0x0/0x24 @ 1
  928. [106779.481140] f_mass_storage init
  929. [106779.481414] android_register_function usb_mass_storage
  930. [106779.481689] initcall init+0x0/0x24 returned 0 after 566 usecs
  931. [106779.482208] calling init+0x0/0x24 @ 1
  932. [106779.482513] f_mtp init
  933. [106779.482788] android_register_function mtp
  934. [106779.483306] initcall init+0x0/0x24 returned 0 after 774 usecs
  935. [106779.483612] calling init+0x0/0x24 @ 1
  936. [106779.484130] f_acm init
  937. [106779.484405] android_register_function acm
  938. [106779.484680] initcall init+0x0/0x24 returned 0 after 566 usecs
  939. [106779.485229] calling init+0x0/0x30 @ 1
  940. [106779.485504] f_rndis init
  941. [106779.487274] android_register_function rndis
  942. [106779.487884] initcall init+0x0/0x30 returned 0 after 2264 usecs
  943. [106779.488189] calling init+0x0/0x24 @ 1
  944. [106779.488464] f_via_cpbypass init
  945. [106779.488983] android_register_function ets
  946. [106779.489257] Gadget Usb: ACM Bind Config
  947. [106779.491699] Gadget USB: usbnet_bind_config
  948. [106779.494445] usb_ether_get_stats
  949. [106779.497192] Gadget Usb: mtp_bind_config
  950. [106779.499938] rndis_function_bind_config MAC: 02:01:45:34:41:49
  951. [106779.500579] android_usb gadget: using random self ethernet address
  952. [106779.500885] android_usb gadget: using random host ethernet address
  953. [106779.503662] usb1: MAC fa:41:90:a2:80:70
  954. [106779.503997] usb1: HOST MAC da:8e:62:71:50:42
  955. [106779.505676] Gadget Usb: mass_storage_bind_config
  956. [106779.507293] fsg_probe pdata: c0582f10
  957. [106779.511108] android_usb gadget: Number of LUNs=2
  958. [106779.511505] Gadget Usb: adb_bind_config
  959. [106779.516204] kevin:ets_function_bind():1 ret=0
  960. [106779.516784] enter bypass_register
  961. [106779.517456] initcall init+0x0/0x24 returned 0 after 28252 usecs
  962. [106779.517791] calling evdev_init+0x0/0xc @ 1
  963. [106779.521850] initcall evdev_init+0x0/0xc returned 0 after 3397 usecs
  964. [106779.522216] calling adp5588_init+0x0/0x10 @ 1
  965. [106779.523773] initcall adp5588_init+0x0/0x10 returned 0 after 953 usecs
  966. [106779.524108] calling qtouch_ts_init+0x0/0x74 @ 1
  967. [106779.525665] qtouch_force_reset: Forcing HW reset
  968. [106779.643127] qtouch_process_info_block: Build version is 0x10
  969. [106779.644348] qtouch_process_info_block: Object 5 @ 0x00f2 (9) insts 1 rep_ids 0
  970. [106779.645294] qtouch_process_info_block: Object 6 @ 0x00fb (6) insts 1 rep_ids 1
  971. [106779.646453] qtouch_process_info_block: Object 38 @ 0x0101 (8) insts 1 rep_ids 0
  972. [106779.647003] qtouch_process_info_block: Unknown object type (38) encountered
  973. [106779.647888] qtouch_process_info_block: Object 7 @ 0x0109 (3) insts 1 rep_ids 0
  974. [106779.649047] qtouch_process_info_block: Object 8 @ 0x010c (8) insts 1 rep_ids 0
  975. [106779.650390] qtouch_process_info_block: Object 9 @ 0x0114 (31) insts 1 rep_ids 10
  976. [106779.651367] qtouch_process_info_block: Object 15 @ 0x0133 (11) insts 1 rep_ids 1
  977. [106779.652557] qtouch_process_info_block: Object 18 @ 0x013e (2) insts 1 rep_ids 0
  978. [106779.653869] qtouch_process_info_block: Object 19 @ 0x0140 (16) insts 1 rep_ids 1
  979. [106779.654846] qtouch_process_info_block: Object 20 @ 0x0150 (12) insts 1 rep_ids 1
  980. [106779.656036] qtouch_process_info_block: Object 22 @ 0x015c (17) insts 1 rep_ids 1
  981. [106779.657257] qtouch_process_info_block: Object 23 @ 0x016d (15) insts 1 rep_ids 1
  982. [106779.658294] qtouch_process_info_block: Object 24 @ 0x017c (19) insts 1 rep_ids 4
  983. [106779.659454] qtouch_process_info_block: Object 25 @ 0x018f (14) insts 1 rep_ids 1
  984. [106779.660583] qtouch_process_info_block: Object 27 @ 0x019d (7) insts 1 rep_ids 1
  985. [106779.661499] qtouch_process_info_block: Object 28 @ 0x01a4 (6) insts 1 rep_ids 1
  986. [106779.662628] qtouch_process_info_block: Object 37 @ 0x0070 (130) insts 1 rep_ids 0
  987. [106779.663665] qtouch_process_info_block: Checksum mismatch (0x0000000c != 0x00ac87d5)
  988. [106779.663970] qtouch_process_info_block: qtouch-obp-ts found. family 0x80, variant 0x3, ver 0x10, build 0xab, matrix 16x14, 17 objects.
  989. [106779.664520] qtouch_ts_probe: FW version is 0x10 Build 0xAB
  990. [106779.666870] input: qtouch-touchscreen as /devices/virtual/input/input3
  991. [106779.669433] do_cmd_proc_msg:EEPROM checksum mismatch 0x 14F6A9
  992. [106779.669982] qtouch_hw_init: Doing hw init
  993. [106779.671203] initcall qtouch_ts_init+0x0/0x74 returned 0 after 143051 usecs
  994. [106779.671783] calling gpio_event_init+0x0/0xc @ 1
  995. [106779.672973] GPIO Matrix Keypad Driver: Start keypad matrix for sholes-keypad in interrupt mode
  996. [106779.673919] GPIO Input Driver: Start gpio inputs for sholes-keypad in interrupt mode
  997. [106779.677124] input: sholes-keypad as /devices/virtual/input/input4
  998. [106779.680938] initcall gpio_event_init+0x0/0xc returned 0 after 8553 usecs
  999. [106779.681854] calling keychord_init+0x0/0xc @ 1
  1000. [106779.683990] initcall keychord_init+0x0/0xc returned 0 after 1698 usecs
  1001. [106779.684600] calling uinput_init+0x0/0xc @ 1
  1002. [106779.686767] initcall uinput_init+0x0/0xc returned 0 after 1698 usecs
  1003. [106779.687316] calling bu52014hfv_os_init+0x0/0xc @ 1
  1004. [106779.688476] qtouch_force_calibration: Forcing calibration
  1005. [106779.692321] initcall bu52014hfv_os_init+0x0/0xc returned 0 after 4500 usecs
  1006. [106779.692657] calling sfh7743_init+0x0/0xc @ 1
  1007. [106779.694458] initcall sfh7743_init+0x0/0xc returned 0 after 1162 usecs
  1008. [106779.694793] calling ld_isl29030_init+0x0/0x10 @ 1
  1009. [106779.698791] input: light-prox as /devices/virtual/input/input5
  1010. [106779.714691] initcall ld_isl29030_init+0x0/0x10 returned 0 after 18835 usecs
  1011. [106779.715270] calling keyreset_init+0x0/0xc @ 1
  1012. [106779.716003] using input dev sholes-keypad for key reset
  1013. [106779.717498] initcall keyreset_init+0x0/0xc returned 0 after 1847 usecs
  1014. [106779.717864] calling alarm_driver_init+0x0/0xcc @ 1
  1015. [106779.719635] initcall alarm_driver_init+0x0/0xcc returned 0 after 1132 usecs
  1016. [106779.719970] calling alarm_dev_init+0x0/0x68 @ 1
  1017. [106779.722015] initcall alarm_dev_init+0x0/0x68 returned 0 after 1192 usecs
  1018. [106779.722595] calling cpcap_rtc_init+0x0/0xc @ 1
  1019. [106779.725830] using rtc device, cpcap_rtc, for alarms
  1020. [106779.726257] cpcap_rtc cpcap_rtc: rtc core: registered cpcap_rtc as rtc0
  1021. [106779.732543] initcall cpcap_rtc_init+0x0/0xc returned 0 after 9357 usecs
  1022. [106779.733123] calling i2c_dev_init+0x0/0xb4 @ 1
  1023. [106779.733398] i2c /dev entries driver
  1024. [106779.739501] initcall i2c_dev_init+0x0/0xb4 returned 0 after 5871 usecs
  1025. [106779.740081] calling videodev_init+0x0/0x84 @ 1
  1026. [106779.740356] Linux video capture interface: v2.00
  1027. [106779.741882] initcall videodev_init+0x0/0x84 returned 0 after 1400 usecs
  1028. [106779.742218] calling mt9p012_init+0x0/0x24 @ 1
  1029. [106779.742736] mt9p012 driver loading
  1030. [106779.744445] initcall mt9p012_init+0x0/0x24 returned 0 after 1579 usecs
  1031. [106779.744995] calling mipi_dli_init+0x0/0x38 @ 1
  1032. [106779.746765] MIPI DLI tester probe is finished.
  1033. [106779.748138] initcall mipi_dli_init+0x0/0x38 returned 0 after 2682 usecs
  1034. [106779.748718] calling hp3a_drv_init+0x0/0x1e8 @ 1
  1035. [106779.753967] hp3a hp3a-omap: Registered hp3a driver.
  1036. [106779.754608] initcall hp3a_drv_init+0x0/0x1e8 returned 0 after 5424 usecs
  1037. [106779.754913] calling isp_init+0x0/0xc @ 1
  1038. [106779.756103] omap-iommu omap-iommu.0: isp: version 1.1
  1039. [106779.756591] isp_tmp_buf_alloc: allocating 16777216 bytes
  1040. [106779.921691] omap3isp omap3isp: Revision 15.0 found
  1041. [106779.924194] initcall isp_init+0x0/0xc returned 0 after 164717 usecs
  1042. [106779.924774] calling hdmiTda19989_init+0x0/0x38 @ 1
  1043. [106779.926971] tda19989 register/probe failed (-19)
  1044. [106779.927612] initcall hdmiTda19989_init+0x0/0x38 returned -19 after 2413 usecs
  1045. [106779.927917] calling bridge_init+0x0/0xc @ 1
  1046. [106779.935119] initcall bridge_init+0x0/0xc returned 0 after 6437 usecs
  1047. [106779.935485] calling w1_init+0x0/0x9c @ 1
  1048. [106779.935791] Driver for 1-wire Dallas network protocol.
  1049. [106779.939453] initcall w1_init+0x0/0x9c returned 0 after 3516 usecs
  1050. [106779.939819] calling omap_hdq_init+0x0/0xc @ 1
  1051. [106779.940765] omap_hdq omap_hdq.0: OMAP HDQ Hardware Rev 0.5. Driver in Interrupt mode
  1052. [106779.944793] w1_master_driver w1 bus master: Family 89 for 89.000000000000.5b is not registered.
  1053. [106779.946075] initcall omap_hdq_init+0x0/0xc returned 0 after 5513 usecs
  1054. [106779.946624] calling w1_ds2502_init+0x0/0xc @ 1
  1055. [106779.949432] initcall w1_ds2502_init+0x0/0xc returned 0 after 2086 usecs
  1056. [106779.950012] calling cpcap_chgr_init+0x0/0xc @ 1
  1057. [106779.951568] initcall cpcap_chgr_init+0x0/0xc returned 0 after 1162 usecs
  1058. [106779.952148] calling cpcap_usb_chgr_init+0x0/0xc @ 1
  1059. [106779.953704] initcall cpcap_usb_chgr_init+0x0/0xc returned 0 after 1162 usecs
  1060. [106779.954254] calling cpcap_factory_init+0x0/0xc @ 1
  1061. [106779.956146] initcall cpcap_factory_init+0x0/0xc returned 0 after 1221 usecs
  1062. [106779.956726] calling omap_wdt_init+0x0/0xc @ 1
  1063. [106779.958984] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  1064. [106779.959930] Watchdog auto-pet enabled at 45 sec intervals
  1065. [106779.961517] initcall omap_wdt_init+0x0/0xc returned 0 after 4321 usecs
  1066. [106779.961853] calling dm_init+0x0/0x5c @ 1
  1067. [106779.963104] device-mapper: uevent: version 1.0.3
  1068. [106779.965545] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  1069. [106779.966186] initcall dm_init+0x0/0x5c returned 0 after 3874 usecs
  1070. [106779.966491] calling dm_crypt_init+0x0/0x70 @ 1
  1071. [106779.967254] initcall dm_crypt_init+0x0/0x70 returned 0 after 178 usecs
  1072. [106779.967559] calling hci_uart_init+0x0/0xe8 @ 1
  1073. [106779.968078] Bluetooth: HCI UART driver ver 2.2
  1074. [106779.968383] Bluetooth: HCI H4 protocol initialized
  1075. [106779.968658] Bluetooth: HCILL protocol initialized
  1076. [106779.969177] initcall hci_uart_init+0x0/0xe8 returned 0 after 1072 usecs
  1077. [106779.969482] calling cpufreq_stats_init+0x0/0x50 @ 1
  1078. [106779.970031] initcall cpufreq_stats_init+0x0/0x50 returned 0 after 29 usecs
  1079. [106779.970672] calling cpufreq_gov_userspace_init+0x0/0xc @ 1
  1080. [106779.971252] initcall cpufreq_gov_userspace_init+0x0/0xc returned 0 after 0 usecs
  1081. [106779.971801] calling cpufreq_gov_dbs_init+0x0/0x12c @ 1
  1082. [106779.973815] initcall cpufreq_gov_dbs_init+0x0/0x12c returned 0 after 1609 usecs
  1083. [106779.974395] calling init_ladder+0x0/0xc @ 1
  1084. [106779.974700] cpuidle: using governor ladder
  1085. [106779.975250] initcall init_ladder+0x0/0xc returned 0 after 536 usecs
  1086. [106779.975555] calling init_menu+0x0/0xc @ 1
  1087. [106779.975830] cpuidle: using governor menu
  1088. [106779.976348] initcall init_menu+0x0/0xc returned 0 after 506 usecs
  1089. [106779.976654] calling mmc_blk_init+0x0/0x44 @ 1
  1090. [106779.978393] usb 1-3: new full speed USB device using ohci and address 2
  1091. [106779.979309] initcall mmc_blk_init+0x0/0x44 returned 0 after 2026 usecs
  1092. [106779.979888] calling omap_hsmmc_init+0x0/0x14 @ 1
  1093. [106779.985412] initcall omap_hsmmc_init+0x0/0x14 returned 0 after 5036 usecs
  1094. [106779.986297] calling bd7885_init+0x0/0xc @ 1
  1095. [106779.986968] cpcap_bd7885_probe:CPCAP Probe enter
  1096. [106779.987518] cpcap_bd7885_probe:CPCAP probe exit
  1097. [106779.989776] initcall bd7885_init+0x0/0xc returned 0 after 3039 usecs
  1098. [106779.990356] calling bu9847_init+0x0/0x3c @ 1
  1099. [106779.991638] BU9847 i2c driver : init is completed.
  1100. [106779.992279] initcall bu9847_init+0x0/0x3c returned 0 after 1549 usecs
  1101. [106779.992584] calling ld_adp5588_kpad_init+0x0/0x4c @ 1
  1102. [106779.993469] ADP5588 keyboard led device declared unavailable
  1103. [106779.995147] initcall ld_adp5588_kpad_init+0x0/0x4c returned 0 after 1907 usecs
  1104. [106779.995697] calling ld_lm3530_init+0x0/0x10 @ 1
  1105. [106779.999450] Registered led device: lcd-backlight
  1106. [106780.001007] initcall ld_lm3530_init+0x0/0x10 returned 0 after 4798 usecs
  1107. [106780.001342] calling cpcap_lm3554_init+0x0/0xc @ 1
  1108. [106780.002624] cpcap_lm3554_probe:CPCAP Probe enter
  1109. [106780.011993] Registered led device: torch-flash
  1110. [106780.013397] Registered led device: spotlight
  1111. [106780.013946] LM3554 torch initialized
  1112. [106780.015106] cpcap_lm3554_probe:CPCAP torch probe exit
  1113. [106780.016632] initcall cpcap_lm3554_init+0x0/0xc returned 0 after 14007 usecs
  1114. [106780.016967] calling cpcap_lm3559_init+0x0/0xc @ 1
  1115. [106780.019042] initcall cpcap_lm3559_init+0x0/0xc returned 0 after 1221 usecs
  1116. [106780.019378] calling cpcap_adb_led_init+0x0/0x3c @ 1
  1117. [106780.021179] initcall cpcap_adb_led_init+0x0/0x3c returned 0 after 1192 usecs
  1118. [106780.021545] calling cpcap_gpio_led_init+0x0/0x3c @ 1
  1119. [106780.023895] Registered led device: keyboard-backlight
  1120. [106780.028747] initcall cpcap_gpio_led_init+0x0/0x3c returned 0 after 6437 usecs
  1121. [106780.029388] calling cpcap_kpb_led_init+0x0/0x3c @ 1
  1122. [106780.031677] Registered led device: button-backlight
  1123. [106780.033752] initcall cpcap_kpb_led_init+0x0/0x3c returned 0 after 3874 usecs
  1124. [106780.034179] calling cpcap_mdb_led_init+0x0/0xc @ 1
  1125. [106780.036254] initcall cpcap_mdb_led_init+0x0/0xc returned 0 after 1430 usecs
  1126. [106780.036590] calling cpcap_rgb_led_rgb_init+0x0/0x3c @ 1
  1127. [106780.042236] Registered led device: red
  1128. [106780.043640] Registered led device: green
  1129. [106780.045257] Registered led device: blue
  1130. [106780.046508] initcall cpcap_rgb_led_rgb_init+0x0/0x3c returned 0 after 9089 usecs
  1131. [106780.047058] calling switch_class_init+0x0/0x4 @ 1
  1132. [106780.047363] initcall switch_class_init+0x0/0x4 returned 0 after 0 usecs
  1133. [106780.047912] calling hid_init+0x0/0x4c @ 1
  1134. [106780.049652] initcall hid_init+0x0/0x4c returned 0 after 1370 usecs
  1135. [106780.050201] calling hid_init+0x0/0xbc @ 1
  1136. [106780.052978] usbcore: registered new interface driver usbhid
  1137. [106780.053344] usbhid: v2.6:USB HID core driver
  1138. [106780.053924] initcall hid_init+0x0/0xbc returned 0 after 3278 usecs
  1139. [106780.054229] calling staging_init+0x0/0x8 @ 1
  1140. [106780.054748] initcall staging_init+0x0/0x8 returned 0 after 0 usecs
  1141. [106780.055053] calling binder_init+0x0/0x17c @ 1
  1142. [106780.057739] initcall binder_init+0x0/0x17c returned 0 after 2026 usecs
  1143. [106780.058074] calling logger_init+0x0/0x50 @ 1
  1144. [106780.059814] logger: created 1024K log 'log_main'
  1145. [106780.061340] logger: created 512K log 'log_events'
  1146. [106780.063079] logger: created 64K log 'log_radio'
  1147. [106780.065185] logger: created 64K log 'log_system'
  1148. [106780.065551] initcall logger_init+0x0/0x50 returned 0 after 6735 usecs
  1149. [106780.066101] calling timed_output_init+0x0/0x4 @ 1
  1150. [106780.066406] initcall timed_output_init+0x0/0x4 returned 0 after 0 usecs
  1151. [106780.066925] calling timed_gpio_init+0x0/0xc @ 1
  1152. [106780.068511] initcall timed_gpio_init+0x0/0xc returned 0 after 1192 usecs
  1153. [106780.069061] calling lowmem_init+0x0/0x18 @ 1
  1154. [106780.069366] initcall lowmem_init+0x0/0x18 returned 0 after 29 usecs
  1155. [106780.069915] calling sim_init+0x0/0xc @ 1
  1156. [106780.071472] initcall sim_init+0x0/0xc returned 0 after 1162 usecs
  1157. [106780.072326] calling init_soundcore+0x0/0xb0 @ 1
  1158. [106780.073669] initcall init_soundcore+0x0/0xb0 returned 0 after 953 usecs
  1159. [106780.074249] calling audio_init+0x0/0x38 @ 1
  1160. [106780.081756] initcall audio_init+0x0/0x38 returned 0 after 7003 usecs
  1161. [106780.082336] calling flow_cache_init+0x0/0x100 @ 1
  1162. [106780.082916] initcall flow_cache_init+0x0/0x100 returned 0 after 238 usecs
  1163. [106780.083465] calling blackhole_module_init+0x0/0xc @ 1
  1164. [106780.083770] initcall blackhole_module_init+0x0/0xc returned 0 after 0 usecs
  1165. [106780.084289] calling nfnetlink_init+0x0/0x6c @ 1
  1166. [106780.084594] Netfilter messages via NETLINK v0.30.
  1167. [106780.085174] initcall nfnetlink_init+0x0/0x6c returned 0 after 566 usecs
  1168. [106780.085479] calling nfnetlink_log_init+0x0/0xdc @ 1
  1169. [106780.086151] initcall nfnetlink_log_init+0x0/0xdc returned 0 after 119 usecs
  1170. [106780.086456] calling nf_conntrack_standalone_init+0x0/0xc @ 1
  1171. [106780.086975] nf_conntrack version 0.5.0 (7604 buckets, 30416 max)
  1172. [106780.088439] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  1173. [106780.089019] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
  1174. [106780.089538] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  1175. [106780.090118] initcall nf_conntrack_standalone_init+0x0/0xc returned 0 after 3010 usecs
  1176. [106780.090667] calling nf_ct_proto_gre_init+0x0/0x44 @ 1
  1177. [106780.091247] initcall nf_ct_proto_gre_init+0x0/0x44 returned 0 after 59 usecs
  1178. [106780.091552] calling nf_conntrack_proto_udplite_init+0x0/0x40 @ 1
  1179. [106780.092132] initcall nf_conntrack_proto_udplite_init+0x0/0x40 returned 0 after 59 usecs
  1180. [106780.092437] calling ctnetlink_init+0x0/0xc8 @ 1
  1181. [106780.092956] ctnetlink v0.93: registering with nfnetlink.
  1182. [106780.093292] initcall ctnetlink_init+0x0/0xc8 returned 0 after 298 usecs
  1183. [106780.093811] calling nf_conntrack_ftp_init+0x0/0x19c @ 1
  1184. [106780.094146] initcall nf_conntrack_ftp_init+0x0/0x19c returned 0 after 0 usecs
  1185. [106780.094665] calling nf_conntrack_h323_init+0x0/0xcc @ 1
  1186. [106780.095458] initcall nf_conntrack_h323_init+0x0/0xcc returned 0 after 59 usecs
  1187. [106780.095764] calling nf_conntrack_irc_init+0x0/0x17c @ 1
  1188. [106780.096343] initcall nf_conntrack_irc_init+0x0/0x17c returned 0 after 29 usecs
  1189. [106780.096649] calling nf_conntrack_netbios_ns_init+0x0/0x18 @ 1
  1190. [106780.097198] initcall nf_conntrack_netbios_ns_init+0x0/0x18 returned 0 after 0 usecs
  1191. [106780.097717] calling nf_conntrack_pptp_init+0x0/0x3c @ 1
  1192. [106780.098052] initcall nf_conntrack_pptp_init+0x0/0x3c returned 0 after 0 usecs
  1193. [106780.098571] calling nf_conntrack_sip_init+0x0/0x190 @ 1
  1194. [106780.098876] initcall nf_conntrack_sip_init+0x0/0x190 returned 0 after 29 usecs
  1195. [106780.099426] calling xt_init+0x0/0xac @ 1
  1196. [106780.099731] initcall xt_init+0x0/0xac returned 0 after 0 usecs
  1197. [106780.100250] calling tcpudp_mt_init+0x0/0x10 @ 1
  1198. [106780.100555] initcall tcpudp_mt_init+0x0/0x10 returned 0 after 29 usecs
  1199. [106780.101104] calling classify_tg_init+0x0/0xc @ 1
  1200. [106780.101379] initcall classify_tg_init+0x0/0xc returned 0 after 0 usecs
  1201. [106780.101928] calling mark_tg_init+0x0/0xc @ 1
  1202. [106780.102233] initcall mark_tg_init+0x0/0xc returned 0 after 0 usecs
  1203. [106780.102752] calling nfqueue_tg_init+0x0/0x28 @ 1
  1204. [106780.103424] initcall nfqueue_tg_init+0x0/0x28 returned 0 after 59 usecs
  1205. [106780.103973] calling conntrack_mt_init+0x0/0x10 @ 1
  1206. [106780.104278] initcall conntrack_mt_init+0x0/0x10 returned 0 after 0 usecs
  1207. [106780.104797] calling helper_mt_init+0x0/0xc @ 1
  1208. [106780.105102] initcall helper_mt_init+0x0/0xc returned 0 after 0 usecs
  1209. [106780.105651] calling hl_mt_init+0x0/0x10 @ 1
  1210. [106780.105926] initcall hl_mt_init+0x0/0x10 returned 0 after 0 usecs
  1211. [106780.106475] calling iprange_mt_init+0x0/0x10 @ 1
  1212. [106780.106750] initcall iprange_mt_init+0x0/0x10 returned 0 after 0 usecs
  1213. [106780.107299] calling length_mt_init+0x0/0x10 @ 1
  1214. [106780.107604] initcall length_mt_init+0x0/0x10 returned 0 after 0 usecs
  1215. [106780.108123] calling limit_mt_init+0x0/0xc @ 1
  1216. [106780.108428] initcall limit_mt_init+0x0/0xc returned 0 after 0 usecs
  1217. [106780.108947] calling mark_mt_init+0x0/0xc @ 1
  1218. [106780.109252] initcall mark_mt_init+0x0/0xc returned 0 after 0 usecs
  1219. [106780.109527] calling owner_mt_init+0x0/0x10 @ 1
  1220. [106780.110076] initcall owner_mt_init+0x0/0x10 returned 0 after 0 usecs
  1221. [106780.110351] calling pkttype_mt_init+0x0/0xc @ 1
  1222. [106780.111083] initcall pkttype_mt_init+0x0/0xc returned 0 after 29 usecs
  1223. [106780.111389] calling state_mt_init+0x0/0x10 @ 1
  1224. [106780.111938] initcall state_mt_init+0x0/0x10 returned 0 after 0 usecs
  1225. [106780.112243] calling statistic_mt_init+0x0/0xc @ 1
  1226. [106780.112762] initcall statistic_mt_init+0x0/0xc returned 0 after 0 usecs
  1227. [106780.113067] calling string_mt_init+0x0/0x10 @ 1
  1228. [106780.113616] initcall string_mt_init+0x0/0x10 returned 0 after 0 usecs
  1229. [106780.113891] calling time_mt_init+0x0/0x8c @ 1
  1230. [106780.114440] xt_time: kernel timezone is -0000
  1231. [106780.114715] initcall time_mt_init+0x0/0x8c returned 0 after 298 usecs
  1232. [106780.115264] calling u32_mt_init+0x0/0xc @ 1
  1233. [106780.115539] initcall u32_mt_init+0x0/0xc returned 0 after 0 usecs
  1234. [106780.116088] calling sysctl_ipv4_init+0x0/0x44 @ 1
  1235. [106780.116516] initcall sysctl_ipv4_init+0x0/0x44 returned 0 after 119 usecs
  1236. [106780.117034] calling ah4_init+0x0/0x6c @ 1
  1237. [106780.117370] initcall ah4_init+0x0/0x6c returned 0 after 0 usecs
  1238. [106780.117889] calling esp4_init+0x0/0x6c @ 1
  1239. [106780.118194] initcall esp4_init+0x0/0x6c returned 0 after 0 usecs
  1240. [106780.118835] calling xfrm4_beet_init+0x0/0x10 @ 1
  1241. [106780.119140] initcall xfrm4_beet_init+0x0/0x10 returned 0 after 29 usecs
  1242. [106780.119689] calling tunnel4_init+0x0/0x68 @ 1
  1243. [106780.119995] initcall tunnel4_init+0x0/0x68 returned 0 after 0 usecs
  1244. [106780.120513] calling xfrm4_transport_init+0x0/0x10 @ 1
  1245. [106780.120819] initcall xfrm4_transport_init+0x0/0x10 returned 0 after 0 usecs
  1246. [106780.121337] calling xfrm4_mode_tunnel_init+0x0/0x10 @ 1
  1247. [106780.121643] initcall xfrm4_mode_tunnel_init+0x0/0x10 returned 0 after 0 usecs
  1248. [106780.122192] calling ipv4_netfilter_init+0x0/0xc @ 1
  1249. [106780.122528] initcall ipv4_netfilter_init+0x0/0xc returned 0 after 0 usecs
  1250. [106780.123046] calling nf_conntrack_l3proto_ipv4_init+0x0/0x130 @ 1
  1251. [106780.123748] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x130 returned 0 after 357 usecs
  1252. [106780.124328] calling nf_nat_init+0x0/0x174 @ 1
  1253. [106780.124969] initcall nf_nat_init+0x0/0x174 returned 0 after 89 usecs
  1254. [106780.125274] calling nf_defrag_init+0x0/0x10 @ 1
  1255. [106780.125610] initcall nf_defrag_init+0x0/0x10 returned 0 after 0 usecs
  1256. [106780.126129] calling nf_nat_ftp_init+0x0/0x30 @ 1
  1257. [106780.126586] initcall nf_nat_ftp_init+0x0/0x30 returned 0 after 0 usecs
  1258. [106780.127136] calling init+0x0/0x174 @ 1
  1259. [106780.127441] initcall init+0x0/0x174 returned 0 after 0 usecs
  1260. [106780.127960] calling nf_nat_irc_init+0x0/0x30 @ 1
  1261. [106780.128265] initcall nf_nat_irc_init+0x0/0x30 returned 0 after 0 usecs
  1262. [106780.128784] calling nf_nat_helper_pptp_init+0x0/0xb0 @ 1
  1263. [106780.129089] initcall nf_nat_helper_pptp_init+0x0/0xb0 returned 0 after 0 usecs
  1264. [106780.129638] calling nf_nat_sip_init+0x0/0xfc @ 1
  1265. [106780.129943] initcall nf_nat_sip_init+0x0/0xfc returned 0 after 0 usecs
  1266. [106780.130462] calling nf_nat_proto_gre_init+0x0/0xc @ 1
  1267. [106780.131011] initcall nf_nat_proto_gre_init+0x0/0xc returned 0 after 0 usecs
  1268. [106780.131317] calling nf_nat_proto_udplite_init+0x0/0xc @ 1
  1269. [106780.131835] initcall nf_nat_proto_udplite_init+0x0/0xc returned 0 after 29 usecs
  1270. [106780.132141] calling ip_tables_init+0x0/0xa4 @ 1
  1271. [106780.132781] ip_tables: (C) 2000-2006 Netfilter Core Team
  1272. [106780.133117] initcall ip_tables_init+0x0/0xa4 returned 0 after 417 usecs
  1273. [106780.133636] calling iptable_filter_init+0x0/0x70 @ 1
  1274. [106780.134063] initcall iptable_filter_init+0x0/0x70 returned 0 after 119 usecs
  1275. [106780.134765] calling nf_nat_standalone_init+0x0/0x90 @ 1
  1276. [106780.135253] initcall nf_nat_standalone_init+0x0/0x90 returned 0 after 119 usecs
  1277. [106780.135803] calling addrtype_mt_init+0x0/0x10 @ 1
  1278. [106780.136108] initcall addrtype_mt_init+0x0/0x10 returned 0 after 0 usecs
  1279. [106780.136657] calling ah_mt_init+0x0/0xc @ 1
  1280. [106780.136932] initcall ah_mt_init+0x0/0xc returned 0 after 0 usecs
  1281. [106780.137481] calling ecn_mt_init+0x0/0xc @ 1
  1282. [106780.137756] initcall ecn_mt_init+0x0/0xc returned 0 after 0 usecs
  1283. [106780.138305] calling log_tg_init+0x0/0x30 @ 1
  1284. [106780.138610] initcall log_tg_init+0x0/0x30 returned 0 after 0 usecs
  1285. [106780.139129] calling masquerade_tg_init+0x0/0x38 @ 1
  1286. [106780.139465] initcall masquerade_tg_init+0x0/0x38 returned 0 after 29 usecs
  1287. [106780.139984] calling netmap_tg_init+0x0/0xc @ 1
  1288. [106780.140289] initcall netmap_tg_init+0x0/0xc returned 0 after 0 usecs
  1289. [106780.140838] calling redirect_tg_init+0x0/0xc @ 1
  1290. [106780.141113] initcall redirect_tg_init+0x0/0xc returned 0 after 0 usecs
  1291. [106780.141662] calling reject_tg_init+0x0/0xc @ 1
  1292. [106780.141967] initcall reject_tg_init+0x0/0xc returned 0 after 0 usecs
  1293. [106780.142608] calling arp_tables_init+0x0/0x88 @ 1
  1294. [106780.143035] arp_tables: (C) 2002 David S. Miller
  1295. [106780.143585] initcall arp_tables_init+0x0/0x88 returned 0 after 625 usecs
  1296. [106780.143890] calling arpt_mangle_init+0x0/0xc @ 1
  1297. [106780.144439] initcall arpt_mangle_init+0x0/0xc returned 0 after 0 usecs
  1298. [106780.144714] calling arptable_filter_init+0x0/0x40 @ 1
  1299. [106780.145385] initcall arptable_filter_init+0x0/0x40 returned 0 after 119 usecs
  1300. [106780.145690] calling inet_diag_init+0x0/0x78 @ 1
  1301. [106780.146270] initcall inet_diag_init+0x0/0x78 returned 0 after 59 usecs
  1302. [106780.146575] calling tcp_diag_init+0x0/0xc @ 1
  1303. [106780.147125] initcall tcp_diag_init+0x0/0xc returned 0 after 0 usecs
  1304. [106780.147430] calling cubictcp_register+0x0/0x60 @ 1
  1305. [106780.147949] TCP cubic registered
  1306. [106780.148254] initcall cubictcp_register+0x0/0x60 returned 0 after 268 usecs
  1307. [106780.148773] calling xfrm_user_init+0x0/0x48 @ 1
  1308. [106780.149078] Initializing XFRM netlink socket
  1309. [106780.149749] initcall xfrm_user_init+0x0/0x48 returned 0 after 655 usecs
  1310. [106780.150207] calling inet6_init+0x0/0x26c @ 1
  1311. [106780.151367] NET: Registered protocol family 10
  1312. [106780.153717] lo: Disabled Privacy Extensions
  1313. [106780.155212] initcall inet6_init+0x0/0x26c returned 0 after 4500 usecs
  1314. [106780.155761] calling ah6_init+0x0/0x6c @ 1
  1315. [106780.156097] initcall ah6_init+0x0/0x6c returned 0 after 0 usecs
  1316. [106780.156616] calling esp6_init+0x0/0x6c @ 1
  1317. [106780.156921] initcall esp6_init+0x0/0x6c returned 0 after 0 usecs
  1318. [106780.157440] calling ipcomp6_init+0x0/0x6c @ 1
  1319. [106780.157928] initcall ipcomp6_init+0x0/0x6c returned 0 after 0 usecs
  1320. [106780.158477] calling xfrm6_tunnel_init+0x0/0xe4 @ 1
  1321. [106780.159057] initcall xfrm6_tunnel_init+0x0/0xe4 returned 0 after 238 usecs
  1322. [106780.159606] calling tunnel6_init+0x0/0x64 @ 1
  1323. [106780.159912] initcall tunnel6_init+0x0/0x64 returned 0 after 0 usecs
  1324. [106780.160430] calling xfrm6_transport_init+0x0/0x10 @ 1
  1325. [106780.160736] initcall xfrm6_transport_init+0x0/0x10 returned 0 after 29 usecs
  1326. [106780.161285] calling xfrm6_mode_tunnel_init+0x0/0x10 @ 1
  1327. [106780.161590] initcall xfrm6_mode_tunnel_init+0x0/0x10 returned 0 after 0 usecs
  1328. [106780.162109] calling xfrm6_beet_init+0x0/0x10 @ 1
  1329. [106780.162414] initcall xfrm6_beet_init+0x0/0x10 returned 0 after 0 usecs
  1330. [106780.162933] calling mip6_init+0x0/0xb8 @ 1
  1331. [106780.163208] Mobile IPv6
  1332. [106780.163513] initcall mip6_init+0x0/0xb8 returned 0 after 268 usecs
  1333. [106780.164031] calling sit_init+0x0/0x6c @ 1
  1334. [106780.164337] IPv6 over IPv4 tunneling driver
  1335. [106780.167510] sit0: Disabled Privacy Extensions
  1336. [106780.168243] initcall sit_init+0x0/0x6c returned 0 after 3755 usecs
  1337. [106780.168792] calling ip6_tunnel_init+0x0/0x9c @ 1
  1338. [106780.171081] ip6tnl0: Disabled Privacy Extensions
  1339. [106780.172088] initcall ip6_tunnel_init+0x0/0x9c returned 0 after 2861 usecs
  1340. [106780.172424] calling packet_init+0x0/0x48 @ 1
  1341. [106780.172973] NET: Registered protocol family 17
  1342. [106780.173675] initcall packet_init+0x0/0x48 returned 0 after 655 usecs
  1343. [106780.174011] calling ipsec_pfkey_init+0x0/0x84 @ 1
  1344. [106780.174560] NET: Registered protocol family 15
  1345. [106780.174957] initcall ipsec_pfkey_init+0x0/0x84 returned 0 after 387 usecs
  1346. [106780.175506] calling l2cap_init+0x0/0xe4 @ 1
  1347. [106780.175842] Bluetooth: L2CAP ver 2.14
  1348. [106780.176391] Bluetooth: L2CAP socket layer initialized
  1349. [106780.176696] initcall l2cap_init+0x0/0xe4 returned 0 after 864 usecs
  1350. [106780.177215] calling sco_init+0x0/0xe4 @ 1
  1351. [106780.177551] Bluetooth: SCO (Voice Link) ver 0.6
  1352. [106780.177825] Bluetooth: SCO socket layer initialized
  1353. [106780.178344] initcall sco_init+0x0/0xe4 returned 0 after 834 usecs
  1354. [106780.178649] calling rfcomm_init+0x0/0xd8 @ 1
  1355. [106780.179840] Bluetooth: RFCOMM TTY layer initialized
  1356. [106780.180206] Bluetooth: RFCOMM socket layer initialized
  1357. [106780.180725] Bluetooth: RFCOMM ver 1.11
  1358. [106780.181060] initcall rfcomm_init+0x0/0xd8 returned 0 after 1788 usecs
  1359. [106780.181915] calling bnep_init+0x0/0x64 @ 1
  1360. [106780.182220] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  1361. [106780.182525] initcall bnep_init+0x0/0x64 returned 0 after 298 usecs
  1362. [106780.183074] calling hidp_init+0x0/0x58 @ 1
  1363. [106780.183349] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  1364. [106780.185180] initcall hidp_init+0x0/0x58 returned 0 after 1698 usecs
  1365. [106780.185516] calling omap_dss_init2+0x0/0xc @ 1
  1366. [106780.187164] OMAP DSS rev 2.0
  1367. [106780.187561] OMAP DISPC rev 3.0
  1368. [106780.188446] OMAP DSI rev 1.0
  1369. [106780.197906] qtouch_force_calibration: Forcing calibration
  1370. [106780.198730] do_cmd_proc_msg: Reset done.
  1371. [106780.199249] do_cmd_proc_msg: Self-calibration started.
  1372. [106780.212829] mmc1 set to SECTOR mode
  1373. [106780.214691] mmc1: CSD structure version decoded in EXT_CSD
  1374. [106780.230010] mmc1: new high speed MMC card at address 0001
  1375. [106780.232971] qtouch_hw_init: Doing hw init
  1376. [106780.233825] mmcblk1: mmc1:0001 SEM08G 7.39 GiB
  1377. [106780.234771] mmcblk1: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 >
  1378. [106780.258087] qtouch_force_calibration: Forcing calibration
  1379. [106780.281890] mmc_blk_probe: adding mmcblk1p20:kpanic
  1380. [106780.284515] apanic: Bound to mmc block device 'mmcblk1p20(179:52)'
  1381. [106780.285156] apanic: No panic data available
  1382. [106780.292053] usb 1-3: configuration #1 chosen from 1 choice
  1383. [106780.317993] cdma-modem 1-3:1.0: QSC 6085 Modem Driver converter detected
  1384. [106780.321411] usb 1-3: QSC 6085 Modem Driver converter now attached to ttyUSB0
  1385. [106780.323913] cdma-modem 1-3:1.1: QSC 6085 Modem Driver converter detected
  1386. [106780.327178] usb 1-3: QSC 6085 Modem Driver converter now attached to ttyUSB1
  1387. [106780.331787] cdma-modem 1-3:1.2: QSC 6085 Modem Driver converter detected
  1388. [106780.335052] usb 1-3: QSC 6085 Modem Driver converter now attached to ttyUSB2
  1389. [106780.339813] cdma-modem 1-3:1.3: QSC 6085 Modem Driver converter detected
  1390. [106780.343505] usb 1-3: QSC 6085 Modem Driver converter now attached to ttyUSB3
  1391. [106780.345855] cdma-modem 1-3:1.4: QSC 6085 Modem Driver converter detected
  1392. [106780.349578] usb 1-3: QSC 6085 Modem Driver converter now attached to ttyUSB4
  1393. [106780.353393] DT: width= 480 height= 854
  1394. [106780.353973] DT: hfp=0 hsw=2 hbp=2 vfp=0 vsw=1 vbp=1
  1395. [106780.354248] DT: clk_lane=1 clk_pos=0 data1_lane=2 data1_pos=0
  1396. [106780.354766] DT: data2_lane= 3 data2_pos= 0 xfer_mode= 0
  1397. [106780.355072] DT: gpio_reset=126 panel_id=0x1a0001 te_scan_line=0x200
  1398. [106780.355590] DT: regn=13 regm=170 regm3=5 regm4=5 lp_clk_div=7 lck_div=1 pck_div=4
  1399. [106780.357147] initcall omap_dss_init2+0x0/0xc returned 0 after 167042 usecs
  1400. [106780.357727] calling omapfb_init+0x0/0x4c @ 1
  1401. [106780.387725] omapdss DSI error: DSI error, irqstatus 100000
  1402. [106780.388275] DSI IRQ: 0x100000: TA_TIMEOUT
  1403. [106780.759704] qtouch_force_reset: Forcing HW reset
  1404. [106780.876678] omapdss DSI error: Failed to receive BTA
  1405. [106780.892150] omapdss DSI error: Failed to send short packet
  1406. [106780.912109] do_cmd_proc_msg:EEPROM checksum mismatch 0x 14F6A9
  1407. [106780.912414] qtouch_hw_init: Doing hw init
  1408. [106780.920989] qtouch_force_calibration: Forcing calibration
  1409. [106781.392486] omapdss DSI error: Failed to receive BTA
  1410. [106781.393066] failed to send cmd=0xb2
  1411. [106781.407745] omapdss DSI error: Failed to send short packet
  1412. [106781.424133] qtouch_force_calibration: Forcing calibration
  1413. [106781.425231] do_cmd_proc_msg: Reset done.
  1414. [106781.425537] do_cmd_proc_msg: Self-calibration started.
  1415. [106781.907745] omapdss DSI error: Failed to receive BTA
  1416. [106781.908081] failed to send cmd=0xb2
  1417. [106781.923370] omapdss DSI error: Failed to send short packet
  1418. [106782.423370] omapdss DSI error: Failed to receive BTA
  1419. [106782.423706] failed to send cmd=0xb2
  1420. [106782.438964] omapdss DSI error: Failed to send short packet
  1421. [106782.938964] omapdss DSI error: Failed to receive BTA
  1422. [106782.939544] failed to send cmd=0xb2
  1423. [106782.954620] omapdss DSI error: Failed to send short packet
  1424. [106783.454589] omapdss DSI error: Failed to receive BTA
  1425. [106783.455169] failed to send cmd=0xb2
  1426. [106783.470214] omapdss DSI error: Failed to send short packet
  1427. [106783.970214] omapdss DSI error: Failed to receive BTA
  1428. [106783.970550] failed to send cmd=0xb2
  1429. [106783.985870] omapdss DSI error: Failed to send short packet
  1430. [106784.485870] omapdss DSI error: Failed to receive BTA
  1431. [106784.486206] failed to send cmd=0xb2
  1432. [106784.501464] omapdss DSI error: Failed to send short packet
  1433. [106785.001464] omapdss DSI error: Failed to receive BTA
  1434. [106785.002044] failed to send cmd=0xb2
  1435. [106785.017089] omapdss DSI error: Failed to send short packet
  1436. [106785.517120] omapdss DSI error: Failed to receive BTA
  1437. [106785.517669] failed to send cmd=0xb2
  1438. [106785.532745] omapdss DSI error: Failed to send short packet
  1439. [106786.032714] omapdss DSI error: Failed to receive BTA
  1440. [106786.033050] failed to send cmd=0xb2
  1441. [106786.033355] failed to read dcs_cmd=0 read_cmd=0xb2 read_len=1 chk_val=0x0 chk_mask=0x3
  1442. [106786.033355] read_val=0x2c
  1443. [106786.034149] failed to send SET_MCS
  1444. [106786.048339] omapdss DSI error: Failed to send long packet
  1445. [106786.548400] omapdss DSI error: Failed to receive BTA
  1446. [106786.563964] omapdss DSI error: Failed to send long packet
  1447. [106787.063964] omapdss DSI error: Failed to receive BTA
  1448. [106787.064544] failed to send cmd=0xef
  1449. [106787.079620] omapdss DSI error: Failed to send long packet
  1450. [106787.579620] omapdss DSI error: Failed to receive BTA
  1451. [106787.580169] failed to send cmd=0xef
  1452. [106787.595214] omapdss DSI error: Failed to send long packet
  1453. [106788.095245] omapdss DSI error: Failed to receive BTA
  1454. [106788.095581] failed to send cmd=0xef
  1455. [106788.110839] omapdss DSI error: Failed to send long packet
  1456. [106788.610870] omapdss DSI error: Failed to receive BTA
  1457. [106788.611206] failed to send cmd=0xef
  1458. [106788.626464] omapdss DSI error: Failed to send long packet
  1459. [106789.126464] omapdss DSI error: Failed to receive BTA
  1460. [106789.127044] failed to send cmd=0xef
  1461. [106789.142089] omapdss DSI error: Failed to send long packet
  1462. [106789.642120] omapdss DSI error: Failed to receive BTA
  1463. [106789.642700] failed to send cmd=0xef
  1464. [106789.657714] omapdss DSI error: Failed to send long packet
  1465. [106790.157775] omapdss DSI error: Failed to receive BTA
  1466. [106790.158111] failed to send cmd=0xef
  1467. [106790.173370] omapdss DSI error: Failed to send long packet
  1468. [106790.673400] omapdss DSI error: Failed to receive BTA
  1469. [106790.673767] failed to send cmd=0xef
  1470. [106790.688964] omapdss DSI error: Failed to send long packet
  1471. [106791.188964] omapdss DSI error: Failed to receive BTA
  1472. [106791.189544] failed to send cmd=0xef
  1473. [106791.204620] omapdss DSI error: Failed to send long packet
  1474. [106791.704620] omapdss DSI error: Failed to receive BTA
  1475. [106791.705169] failed to send cmd=0xef
  1476. [106791.705474] failed to read dcs_cmd=1 read_cmd=0xb5 read_len=1 chk_val=0x1 chk_mask=0x1
  1477. [106791.705474] read_val=0x38
  1478. [106791.706237] failed to send LANE_CONFIG
  1479. [106791.720214] omapdss DSI error: Failed to send short packet
  1480. [106792.220245] omapdss DSI error: Failed to receive BTA
  1481. [106792.220581] failed to send cmd=0x20
  1482. [106792.235870] omapdss DSI error: Failed to send short packet
  1483. [106792.735870] omapdss DSI error: Failed to receive BTA
  1484. [106792.736450] failed to send cmd=0x20
  1485. [106792.751495] omapdss DSI error: Failed to send short packet
  1486. [106793.251495] omapdss DSI error: Failed to receive BTA
  1487. [106793.252044] failed to send cmd=0x20
  1488. [106793.267089] omapdss DSI error: Failed to send short packet
  1489. [106793.767150] omapdss DSI error: Failed to receive BTA
  1490. [106793.767486] failed to send cmd=0x20
  1491. [106793.782714] omapdss DSI error: Failed to send short packet
  1492. [106794.282714] omapdss DSI error: Failed to receive BTA
  1493. [106794.283050] failed to send cmd=0x20
  1494. [106794.298370] omapdss DSI error: Failed to send short packet
  1495. [106794.798370] omapdss DSI error: Failed to receive BTA
  1496. [106794.798919] failed to send cmd=0x20
  1497. [106794.813964] omapdss DSI error: Failed to send short packet
  1498. [106795.313995] omapdss DSI error: Failed to receive BTA
  1499. [106795.314544] failed to send cmd=0x20
  1500. [106795.329589] omapdss DSI error: Failed to send short packet
  1501. [106795.829589] omapdss DSI error: Failed to receive BTA
  1502. [106795.829925] failed to send cmd=0x20
  1503. [106795.845245] omapdss DSI error: Failed to send short packet
  1504. [106796.345245] omapdss DSI error: Failed to receive BTA
  1505. [106796.345550] failed to send cmd=0x20
  1506. [106796.360839] omapdss DSI error: Failed to send short packet
  1507. [106796.860900] omapdss DSI error: Failed to receive BTA
  1508. [106796.861450] failed to send cmd=0x20
  1509. [106796.861755] failed to read dcs_cmd=1 read_cmd=0xd read_len=1 chk_val=0x0 chk_mask=0x20
  1510. [106796.861785] read_val=0x16
  1511. [106796.862548] failed to send EDISCO_CMD_SET_INVERSION_OFF
  1512. [106796.876495] omapdss DSI error: Failed to send short packet
  1513. [106797.376464] omapdss DSI error: Failed to receive BTA
  1514. [106797.376800] failed to send cmd=0xb3
  1515. [106797.392120] omapdss DSI error: Failed to send short packet
  1516. [106797.892089] omapdss DSI error: Failed to receive BTA
  1517. [106797.892669] failed to send cmd=0xb3
  1518. [106797.907714] omapdss DSI error: Failed to send short packet
  1519. [106798.407745] omapdss DSI error: Failed to receive BTA
  1520. [106798.408294] failed to send cmd=0xb3
  1521. [106798.423339] omapdss DSI error: Failed to send short packet
  1522. [106798.923339] omapdss DSI error: Failed to receive BTA
  1523. [106798.923675] failed to send cmd=0xb3
  1524. [106798.938995] omapdss DSI error: Failed to send short packet
  1525. [106799.438964] omapdss DSI error: Failed to receive BTA
  1526. [106799.439300] failed to send cmd=0xb3
  1527. [106799.454589] omapdss DSI error: Failed to send short packet
  1528. [106799.954589] omapdss DSI error: Failed to receive BTA
  1529. [106799.955169] failed to send cmd=0xb3
  1530. [106799.970214] omapdss DSI error: Failed to send short packet
  1531. [106800.470245] omapdss DSI error: Failed to receive BTA
  1532. [106800.470794] failed to send cmd=0xb3
  1533. [106800.485839] omapdss DSI error: Failed to send short packet
  1534. [106800.985839] omapdss DSI error: Failed to receive BTA
  1535. [106800.986175] failed to send cmd=0xb3
  1536. [106801.001495] omapdss DSI error: Failed to send short packet
  1537. [106801.501464] omapdss DSI error: Failed to receive BTA
  1538. [106801.501800] failed to send cmd=0xb3
  1539. [106801.517089] omapdss DSI error: Failed to send short packet
  1540. [106802.017089] omapdss DSI error: Failed to receive BTA
  1541. [106802.017669] failed to send cmd=0xb3
  1542. [106802.017944] failed to read dcs_cmd=1 read_cmd=0xb3 read_len=1 chk_val=0x0 chk_mask=0x1
  1543. [106802.017974] read_val=0x16
  1544. [106802.018737] failed to send SET_DISPLAY_MODE
  1545. [106802.032714] omapdss DSI error: Failed to send short packet
  1546. [106802.532745] omapdss DSI error: Failed to receive BTA
  1547. [106802.533081] failed to send cmd=0xb4
  1548. [106802.548339] omapdss DSI error: Failed to send short packet
  1549. [106803.048431] omapdss DSI error: Failed to receive BTA
  1550. [106803.048980] failed to send cmd=0xb4
  1551. [106803.063964] omapdss DSI error: Failed to send short packet
  1552. [106803.563964] omapdss DSI error: Failed to receive BTA
  1553. [106803.564544] failed to send cmd=0xb4
  1554. [106803.579620] omapdss DSI error: Failed to send short packet
  1555. [106804.079589] omapdss DSI error: Failed to receive BTA
  1556. [106804.079925] failed to send cmd=0xb4
  1557. [106804.095214] omapdss DSI error: Failed to send short packet
  1558. [106804.595245] omapdss DSI error: Failed to receive BTA
  1559. [106804.595581] failed to send cmd=0xb4
  1560. [106804.610839] omapdss DSI error: Failed to send short packet
  1561. [106805.110870] omapdss DSI error: Failed to receive BTA
  1562. [106805.111419] failed to send cmd=0xb4
  1563. [106805.126495] omapdss DSI error: Failed to send short packet
  1564. [106805.626464] omapdss DSI error: Failed to receive BTA
  1565. [106805.627044] failed to send cmd=0xb4
  1566. [106805.642089] omapdss DSI error: Failed to send short packet
  1567. [106806.142089] omapdss DSI error: Failed to receive BTA
  1568. [106806.142425] failed to send cmd=0xb4
  1569. [106806.157714] omapdss DSI error: Failed to send short packet
  1570. [106806.657745] omapdss DSI error: Failed to receive BTA
  1571. [106806.658081] failed to send cmd=0xb4
  1572. [106806.673370] omapdss DSI error: Failed to send short packet
  1573. [106807.173370] omapdss DSI error: Failed to receive BTA
  1574. [106807.173919] failed to send cmd=0xb4
  1575. [106807.174224] failed to read dcs_cmd=1 read_cmd=0xb4 read_len=1 chk_val=0x9 chk_mask=0x1f
  1576. [106807.174224] read_val=0x16
  1577. [106807.175018] failed to send CABC/PWM
  1578. [106807.188964] omapdss DSI error: Failed to send short packet
  1579. [106807.688995] omapdss DSI error: Failed to receive BTA
  1580. [106807.689331] failed to send cmd=0x11
  1581. [106807.704620] omapdss DSI error: Failed to send short packet
  1582. [106808.204650] omapdss DSI error: Failed to receive BTA
  1583. [106808.204986] failed to send cmd=0x11
  1584. [106808.220214] omapdss DSI error: Failed to send short packet
  1585. [106808.720275] omapdss DSI error: Failed to receive BTA
  1586. [106808.720825] failed to send cmd=0x11
  1587. [106808.735839] omapdss DSI error: Failed to send short packet
  1588. [106809.235839] omapdss DSI error: Failed to receive BTA
  1589. [106809.236419] failed to send cmd=0x11
  1590. [106809.251464] omapdss DSI error: Failed to send short packet
  1591. [106809.751464] omapdss DSI error: Failed to receive BTA
  1592. [106809.751800] failed to send cmd=0x11
  1593. [106809.767089] omapdss DSI error: Failed to send short packet
  1594. [106810.267120] omapdss DSI error: Failed to receive BTA
  1595. [106810.267425] failed to send cmd=0x11
  1596. [106810.282745] omapdss DSI error: Failed to send short packet
  1597. [106810.782775] omapdss DSI error: Failed to receive BTA
  1598. [106810.783325] failed to send cmd=0x11
  1599. [106810.798339] omapdss DSI error: Failed to send short packet
  1600. [106811.298339] omapdss DSI error: Failed to receive BTA
  1601. [106811.298675] failed to send cmd=0x11
  1602. [106811.313964] omapdss DSI error: Failed to send short packet
  1603. [106811.813964] omapdss DSI error: Failed to receive BTA
  1604. [106811.814300] failed to send cmd=0x11
  1605. [106811.829589] omapdss DSI error: Failed to send short packet
  1606. [106812.329589] omapdss DSI error: Failed to receive BTA
  1607. [106812.329925] failed to send cmd=0x11
  1608. [106812.330474] failed to read dcs_cmd=1 read_cmd=0xa read_len=1 chk_val=0x10 chk_mask=0x10
  1609. [106812.330474] read_val=0x16
  1610. [106812.331268] failed to send EXIT_SLEEP_MODE
  1611. [106812.332061] omapfb omapfb: Failed to enable display 'lcd'
  1612. [106812.333984] initcall omapfb_init+0x0/0x4c returned 0 after 31226485 usecs
  1613. [106812.334320] calling dispsw_init+0x0/0x38 @ 1
  1614. [106812.336975] failed dispsw register/probe -19
  1615. [106812.337524] initcall dispsw_init+0x0/0x38 returned -19 after 2563 usecs
  1616. [106812.338104] calling omapvout_init+0x0/0x38 @ 1
  1617. [106812.342773] plane 1, # of overlays: 3
  1618. [106812.345672] plane 2, # of overlays: 3
  1619. [106812.349426] initcall omapvout_init+0x0/0x38 returned 0 after 10699 usecs
  1620. [106812.349761] calling omap_pm_init+0x0/0xa8 @ 1
  1621. [106812.350433] initcall omap_pm_init+0x0/0xa8 returned 0 after 119 usecs
  1622. [106812.350738] calling omap_sr_adjust_vsel_init+0x0/0x38 @ 1
  1623. [106812.351287] initcall omap_sr_adjust_vsel_init+0x0/0x38 returned 0 after 0 usecs
  1624. [106812.351593] calling omap3_pm_init+0x0/0x784 @ 1
  1625. [106812.352111] omap_is_SEC: fab_id = 10, it is SEC OMAP3630 Silicon
  1626. [106812.352416] Power Management for TI OMAP3.
  1627. [106812.366302] initcall omap3_pm_init+0x0/0x784 returned 0 after 13768 usecs
  1628. [106812.366668] calling omap_sr_init+0x0/0x668 @ 1
  1629. [106812.367187]
  1630. [106812.367187] MAPPHONE PMIC SR init...
  1631. [106812.367889] SR1 : Fused Nvalues for 5 OPP
  1632. [106812.368408] VDD1 - OPP5 - 1.2G Nvalue = 0xAB80EA
  1633. [106812.368835] VDD1 - OPP4 - 1G Nvalue = 0xAA9787
  1634. [106812.369110] VDD1 - OPP3 - 800 Nvalue = 0xAAC1A7
  1635. [106812.369659] VDD1 - OPP2 - 600 Nvalue = 0xAAFDD7
  1636. [106812.369934] VDD1 - OPP1 - 300 Nvalue = 0x99C1A0
  1637. [106812.370758] SR2 : Fused Nvalues for 2 OPP
  1638. [106812.371032] VDD2 - OPP2 - 200 Nvalue = 0xAADCBD
  1639. [106812.371337] VDD2 - OPP1 - 100 Nvalue = 0x99AC91
  1640. [106812.371978] SR: debugfs_create_file failed
  1641. [106812.372283] SmartReflex driver initialized
  1642. [106812.372589] initcall omap_sr_init+0x0/0x668 returned 0 after 5245 usecs
  1643. [106812.373138] calling clk_disable_unused+0x0/0xcc @ 1
  1644. [106812.373687] Disabling unused clock "uart3_ick"
  1645. [106812.374023] Disabling unused clock "uart3_fck"
  1646. [106812.374328] Disabling unused clock "rng_ick"
  1647. [106812.375000] initcall clk_disable_unused+0x0/0xcc returned 0 after 1281 usecs
  1648. [106812.375335] calling omap3_gpio_pads_init+0x0/0x1a8 @ 1
  1649. [106812.376007] initcall omap3_gpio_pads_init+0x0/0x1a8 returned 0 after 119 usecs
  1650. [106812.376312] calling omap_cpufreq_init+0x0/0xc @ 1
  1651. [106812.398223] sr_recalibrate: 2:2 autocomp was disabled
  1652. [106812.398925] initcall omap_cpufreq_init+0x0/0xc returned 0 after 21398 usecs
  1653. [106812.399108] calling vfp_init+0x0/0x150 @ 1
  1654. [106812.399200] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  1655. [106812.400238] initcall vfp_init+0x0/0x150 returned 0 after 983 usecs
  1656. [106812.400390] calling sched_init_debug+0x0/0x10 @ 1
  1657. [106812.400482] initcall sched_init_debug+0x0/0x10 returned 0 after 0 usecs
  1658. [106812.400634] calling init_oops_id+0x0/0x44 @ 1
  1659. [106812.400756] initcall init_oops_id+0x0/0x44 returned 0 after 0 usecs
  1660. [106812.400909] calling disable_boot_consoles+0x0/0x50 @ 1
  1661. [106812.400970] initcall disable_boot_consoles+0x0/0x50 returned 0 after 0 usecs
  1662. [106812.401123] calling pm_qos_power_init+0x0/0x64 @ 1
  1663. [106812.402832] initcall pm_qos_power_init+0x0/0x64 returned 0 after 1549 usecs
  1664. [106812.402984] calling random32_reseed+0x0/0x60 @ 1
  1665. [106812.403106] initcall random32_reseed+0x0/0x60 returned 0 after 29 usecs
  1666. [106812.403259] calling regulator_init_complete+0x0/0x14c @ 1
  1667. [106812.404022] initcall regulator_init_complete+0x0/0x14c returned 0 after 655 usecs
  1668. [106812.404205] calling seqgen_init+0x0/0x14 @ 1
  1669. [106812.404296] initcall seqgen_init+0x0/0x14 returned 0 after 29 usecs
  1670. [106812.404479] calling PVRCore_Init+0x0/0x120 @ 1
  1671. [106812.406768] initcall PVRCore_Init+0x0/0x120 returned 0 after 2145 usecs
  1672. [106812.406921] calling OMAPLFB_Init+0x0/0x30 @ 1
  1673. [106812.407928] initcall OMAPLFB_Init+0x0/0x30 returned 0 after 864 usecs
  1674. [106812.408111] calling cpcap_usb_det_init+0x0/0xc @ 1
  1675. [106812.408386] regulator_check_voltage: operation not allowed for vusb
  1676. [106812.409393] cpcap_usb_det cpcap_usb_det: CPCAP USB detection device probed
  1677. [106812.414520] initcall cpcap_usb_det_init+0x0/0xc returned 0 after 6169 usecs
  1678. [106812.414703] calling rtc_hctosys+0x0/0x138 @ 1
  1679. [106812.415039] cpcap_rtc cpcap_rtc: setting system clock to 2014-01-05 01:35:13 UTC (1388885713)
  1680. [106812.415191] initcall rtc_hctosys+0x0/0x138 returned 0 after 417 usecs
  1681. [106812.415344] calling alarm_late_init+0x0/0xc0 @ 1
  1682. [106812.415588] initcall alarm_late_init+0x0/0xc0 returned 0 after 29 usecs
  1683. [106812.415771] calling omap34xxcam_init+0x0/0x104 @ 1
  1684. [106812.415893] initcall omap34xxcam_init+0x0/0x104 returned 0 after 29 usecs
  1685. [106812.416046] calling ov5650sensor_init+0x0/0x30 @ 1
  1686. [106812.416290] ov5650_sensor_power_set: power on
  1687. [106812.419647] ov5650_sensor_power_set_reset: power on
  1688. [106812.419738] cam_reset_gpio 98
  1689. [106812.419830] cam_standby_gpio 64
  1690. [106812.420043] mapphone_camera_reg_power - enable vcam
  1691. [106812.421417] mapphone_camera_reg_power - enable vwlan1
  1692. [106812.526885] cpcap spi1.0: notify_accy: accy=0
  1693. [106812.531768] musb_pullup - Disabling USB Pullups
  1694. [106812.554351] ov5650 Chip version 0x1e detected
  1695. [106812.554565] ov5650_sensor_power_set_reset: power off
  1696. [106812.554656] mapphone_camera_reg_power - disable vcam
  1697. [106812.554962] mapphone_camera_reg_power - disable vwlan1
  1698. [106812.564575] video4linux video0: video0 is now omap3/ov5650//
  1699. [106812.565155] initcall ov5650sensor_init+0x0/0x30 returned 0 after 145524 usecs
  1700. [106812.565246] calling ov8810sensor_init+0x0/0x30 @ 1
  1701. [106812.565826] initcall ov8810sensor_init+0x0/0x30 returned 0 after 387 usecs
  1702. [106812.565948] calling hplens_init+0x0/0x1a0 @ 1
  1703. [106812.567626] HP_GEN_LENS 3-0004: lens probe called....
  1704. [106812.567749] video4linux video0: video0 is now omap3/ov5650/hplens/
  1705. [106812.567901] Registered hplens as V4L2 device.
  1706. [106812.568389] initcall hplens_init+0x0/0x1a0 returned 0 after 2235 usecs
  1707. [106812.568572] calling ram_console_late_init+0x0/0x74 @ 1
  1708. [106812.568695] initcall ram_console_late_init+0x0/0x74 returned 0 after 59 usecs
  1709. [106812.568847] calling tcp_congestion_default+0x0/0xc @ 1
  1710. [106812.568939] initcall tcp_congestion_default+0x0/0xc returned 0 after 0 usecs
  1711. [106812.569091] calling ip_auto_config+0x0/0xe44 @ 1
  1712. [106812.569213] initcall ip_auto_config+0x0/0xe44 returned 0 after 29 usecs
  1713. [106812.569366] calling initialize_hashrnd+0x0/0x1c @ 1
  1714. [106812.569458] initcall initialize_hashrnd+0x0/0x1c returned 0 after 29 usecs
  1715. [106812.569641] async_waiting @ 1
  1716. [106812.569732] async_continuing @ 1 after 0 usec
  1717. [106812.569915] Freeing init memory: 180K
  1718. [106812.570037] Warning: unable to open an initial console.
  1719. [106812.574645] init: /init.mapphone_cdma.rc: 193: ignored duplicate definition of service 'dlnasrv'
  1720. [106812.871917] keychord: using input dev sholes-keypad for fevent
  1721. [106812.876281] init: Create mmc alias link error!
  1722. [106812.876861] init: Create mmc alias link error!
  1723. [106812.877075] init: Create mmc alias link error!
  1724. [106812.877227] init: Create mmc alias link error!
  1725. [106812.877349] init: Create mmc alias link error!
  1726. [106812.877532] init: Create mmc alias link error!
  1727. [106812.877685] init: Create mmc alias link error!
  1728. [106812.877868] init: Create mmc alias link error!
  1729. [106812.877990] init: Create mmc alias link error!
  1730. [106812.878112] init: Create mmc alias link error!
  1731. [106812.878326] init: Create mmc alias link error!
  1732. [106812.948730] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
  1733. [106812.949066] kjournald starting. Commit interval 5 seconds
  1734. [106812.950042] EXT3 FS on mmcblk1p21, internal journal
  1735. [106812.950256] EXT3-fs: recovery complete.
  1736. [106812.951354] EXT3-fs: mounted filesystem with ordered data mode.
  1737. [106815.657226] kjournald starting. Commit interval 5 seconds
  1738. [106815.658386] EXT3 FS on mmcblk1p24, internal journal
  1739. [106815.658660] EXT3-fs: mounted filesystem with ordered data mode.
  1740. [106816.641021] kjournald starting. Commit interval 5 seconds
  1741. [106816.641906] EXT3 FS on mmcblk1p22, internal journal
  1742. [106816.642211] EXT3-fs: mounted filesystem with ordered data mode.
  1743. [106816.692718] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
  1744. [106816.692962] CPUFREQ: Per core ondemand sysfs interface is deprecated - sampling_rate
  1745. [106816.693237] sr_vdd1_autocomp: Already set to 1
  1746. [106816.790069] kjournald starting. Commit interval 5 seconds
  1747. [106816.798461] EXT3 FS on mmcblk1p7, internal journal
  1748. [106816.798706] EXT3-fs: mounted filesystem with ordered data mode.
  1749. [106817.002136] kjournald starting. Commit interval 5 seconds
  1750. [106817.003021] EXT3 FS on mmcblk1p23, internal journal
  1751. [106817.003448] EXT3-fs: mounted filesystem with ordered data mode.
  1752. [106817.032012] calling sec_init+0x0/0x30 [sec] @ 1
  1753. [106817.033905] Inserting sec module
  1754. [106817.034027] initcall sec_init+0x0/0x30 [sec] returned 0 after 1639 usecs
  1755. [106817.126251] SMC: SecureCRC=0x0000FF04
  1756. [106817.134490] SMC: PA load failed [0x56]
  1757. [106817.173492] SMC: PA load failed [0x44]
  1758.  
  1759. No errors detected
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!