czesc 1
krok 3
c) ping sie nie powiódł poniewaz porty nie byly aktywne
krok 4
n) ping sie zakończyły się pomyślnie routrer ma aktywne porty i laczy poprawnie sieci

czesc 2
p.porty do zarzadzania to console oraz aux
q. lan fastethernet 0/0 i 0/1
s.router ma zlacza typu wic

krok 2

R1>show version
a)
1)Cisco IOS Software, 2801 Software (C2801-ADVIPSERVICESK9-M), Version 12.4(18e), RELEASE SOFTWARE (fc2)
2)ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
3)R1 uptime is 31 minutes
4)110592K/20480K bytes of memory.
5)Processor board ID FCZ1330C0PK
6)2 FastEthernet interfaces,2 Low-speed serial(sync/async) interfaces,1 Virtual Private Network (VPN) Module
7)62720K bytes of ATA CompactFlash (Read/Write)
8)191K bytes of NVRAM.
9)Configuration register is 0x2102
c)
1)Hardware is Gt96k FE, address is 0025.84a4.3be0 (bia 0025.84a4.3be0)
2)Full-duplex, 100Mb/s, 100BaseTX/FX


e)Encapsulation HDLC, loopback not set


krok 3
R1#show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

C 192.168.0.0/24 is directly connected, FastEthernet0/0
C 192.168.1.0/24 is directly connected, FastEthernet0/1

1)
2)2 trasy sa oznaczone jako C
3)FastEthernet