API tools faq
paste
Advertisement
Guest User

raspi-dmesg

a guest
Sep 22nd, 2015
353
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.32 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0xf00
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Initializing cgroup subsys cpuacct
  4. [ 0.000000] Linux version 3.18.11-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #781 SMP PREEMPT Tue Apr 21 18:07:59 BST 2015
  5. [ 0.000000] CPU: ARMv7 Processor [410fc075] revisionch:31
  6. [ 0.000000] [bcm2709_smp_init_cpus] enter (8620->f3003010)
  7. [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
  8. [ 0.000000] PERCPU: Embedded 10 pages/cpu @bd001000 s11456 r8192 d21312 u4096 0
  9. [ 0.000000] pcpu-alloc: s11456 r8192 d21312 u40960 alloc=10* 5 (ARMv7), cr=10c5387d
  10. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache
  11. [ 0.000000] Machine model: Raspberry Pi 2 Model B
  12. [ 0.000000] cma: Reserved 8 MiB at 0x3d800000
  13. [ 0.000000] Memory policy: Data cache writealloc
  14. [ 0.000000] On node 0 totalpages: 253952
  15. [ 0.000000] free_area_init_node: node 0, pgdat 8080f480, node_mem_map bd03300 0
  16. [ 0.000000] Normal zone: 1984 pages used for memmap
  17. [ 0.000000] Normal zone: 0 pages reserved
  18. [ 0.000000] Normal zone: 253952 pages, LIFO bat4096
  19. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  20. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 251968
  21. [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1366 bcm2708_fb.fbheight=768 bcm2709.boardrev=0xa01041 bcm2709.serial=0x80dd7f38 smsc 95xx.macaddr=B8:27:EB:DD:7F:38 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2 709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_bas e=0x3ea00000 vc_mem.mem_size=0x3f000000 wc_otg.lpm_enable=0 console=ttyAMA0,115 200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
  22. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  23. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  24. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  25. [ 0.000000] Memory: 989600K/1015808K available (5722K kernel code, 397K rwdat a, 1748K rodata, 384K init, 763K bss, 26208K reserved)
  26. [ 0.000000] Virtual kernel memory layout:
  27. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  28. [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
  29. [ 0.000000] vmalloc : 0xbe800000 - 0xff000000 (1032 MB)
  30. [ 0.000000] lowmem : 0x80000000 - 0xbe000000 ( 992 MB)
  31. [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
  32. [ 0.000000] .text : 0x80008000 - 0x80753a48 (7471 kB)
  33. [ 0.000000] .init : 0x80754000 - 0x807b4000 ( 384 kB)
  34. [ 0.000000] .data : 0x807b4000 - 0x808174bc ( 398 kB)
  35. [ 0.000000] .bss : 0x808174bc - 0x808d6254 ( 764 kB)
  36. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  37. [ 0.000000] Preemptible hierarchical RCU implementation.
  38. [ 0.000000] NR_IRQS:608
  39. [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
  40. [ 0.000014] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 35791 39424256ns
  41. [ 0.000036] Switching to timer-based delay loop, resolution 52ns
  42. [ 0.000332] Console: colour dummy device 80x30
  43. [ 0.001768] console [tty1] enabled
  44. [ 0.001819] Calibrating delay loop (skipped), value calculated using timer fr equency.. 38.40 BogoMIPS (lpj=192000)
  45. [ 0.001902] pid_max: default: 32768 minimum: 301
  46. [ 0.002300] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  47. [ 0.002362] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  48. [ 0.003628] Initializing cgroup subsys memory
  49. [ 0.003723] Initializing cgroup subsys devices
  50. [ 0.003776] Initializing cgroup subsys freezer
  51. [ 0.003826] Initializing cgroup subsys net_cls
  52. [ 0.003886] Initializing cgroup subsys blkio
  53. [ 0.003989] CPU: Testing write buffer coherency: ok
  54. [ 0.004105] ftrace: allocating 19614 entries in 58 pages
  55. [ 0.052527] CPU0: update cpu_capacity 1024
  56. [ 0.052607] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
  57. [ 0.052649] [bcm2709_smp_prepare_cpus] enter
  58. [ 0.052801] Setting up static identity map for 0x528478 - 0x5284ac
  59. [ 0.112439] [bcm2709_boot_secondary] cpu:1 started (0) 18
  60. [ 0.112751] CPU1: Booted secondary processor
  61. [ 0.112759] [bcm2709_secondary_init] enter cpu:1
  62. [ 0.112809] CPU1: update cpu_capacity 1024
  63. [ 0.112818] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
  64. [ 0.132413] [bcm2709_boot_secondary] cpu:2 started (0) 18
  65. [ 0.132664] CPU2: Booted secondary processor
  66. [ 0.132671] [bcm2709_secondary_init] enter cpu:2
  67. [ 0.132704] CPU2: update cpu_capacity 1024
  68. [ 0.132712] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
  69. [ 0.152493] [bcm2709_boot_secondary] cpu:3 started (0) 18
  70. [ 0.152733] CPU3: Booted secondary processor
  71. [ 0.152740] [bcm2709_secondary_init] enter cpu:3
  72. [ 0.152769] CPU3: update cpu_capacity 1024
  73. [ 0.152777] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
  74. [ 0.152872] Brought up 4 CPUs
  75. [ 0.152994] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  76. [ 0.153027] CPU: All CPU(s) started in SVC mode.
  77. [ 0.154033] devtmpfs: initialized
  78. [ 0.178894] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  79. [ 0.180877] pinctrl core: initialized pinctrl subsystem
  80. [ 0.183985] NET: Registered protocol family 16
  81. [ 0.189614] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  82. [ 0.190797] bcm2709.uart_clock = 3000000
  83. [ 0.193918] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  84. [ 0.193972] hw-breakpoint: maximum watchpoint size is 8 bytes.
  85. [ 0.194028] mailbox: Broadcom VideoCore Mailbox driver
  86. [ 0.194162] bcm2708_vcio: mailbox at f300b880
  87. [ 0.194522] bcm_power: Broadcom power driver
  88. [ 0.194563] bcm_power_open() -> 0
  89. [ 0.194588] bcm_power_request(0, 8)
  90. [ 0.695265] bcm_mailbox_read -> 00000080, 0
  91. [ 0.695299] bcm_power_request -> 0
  92. [ 0.695443] Serial: AMBA PL011 UART driver
  93. [ 0.695592] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3
  94. [ 1.203872] console [ttyAMA0] enabled
  95. [ 1.275643] SCSI subsystem initialized 65536 bytes)
  96. [ 1.370786] TCP: Hash tables configured (established 8192 bind 8192)
  97. [ 1.377256] TCP: reno registered
  98. [ 1.380533] UDP hash table entries: 512 (order: 2, 16384 bytes)
  99. [ 1.386518] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  100. [ 1.393251] NET: Registered protocol family 1
  101. [ 1.398281] RPC: Registered named UNIX socket transport module.
  102. [ 1.404224] RPC: Registered udp transport module.
  103. [ 1.408999] RPC: Registered tcp transport module.
  104. [ 1.413718] RPC: Registered tcp NFSv4.1 backchannel transport module.
  105. [ 1.421169] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counter s available
  106. [ 1.279665] usbcore: registered new interface driver usbfs
  107. [ 1.285349] usbcore: registered new interface driver hub
  108. [ 1.290816] usbcore: registered new device driver usb
  109. [ 1.297750] Switched to clocksource arch_sys_counter
  110. [ 1.333394] FS-Cache: Loaded
  111. [ 1.336625] CacheFiles: Loaded
  112. [ 1.351167] NET: Registered protocol family 2
  113. [ 1.356824] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  114. [ 1.364082] TCP bind hash table entries: 8192 (order: 4,
  115. [ 1.429576] bcm2708_dma: DMA manager at f3007000
  116. [ 1.434371] vc-mem: phys_addr:0x00000000 mem_base=0x3ea00000 mem_size:0x3f000 000(1008 MiB)
  117. [ 1.444205] futex hash table entries: 1024 (order: 4, 65536 bytes)
  118. [ 1.450728] audit: initializing netlink subsys (disabled)
  119. [ 1.456200] audit: type=2000 audit(1.239:1): initialized
  120. [ 1.477731] VFS: Disk quotas dquot_6.5.2
  121. [ 1.482093] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  122. [ 1.491673] FS-Cache: Netfs 'nfs' registered for caching
  123. [ 1.498076] NFS: Registering the id_resolver key type
  124. [ 1.503206] Key type id_resolver registered
  125. [ 1.507401] Key type id_legacy registered
  126. [ 1.512603] msgmni has been set to 1948
  127. [ 1.518330] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 52)
  128. [ 1.525935] io scheduler noop registered
  129. [ 1.529912] io scheduler deadline registered (default)
  130. [ 1.535362] io scheduler cfq registered
  131. [ 1.541827] BCM2708FB: allocated DMA memory fdc00000
  132. [ 1.546842] BCM2708FB: allocated DMA channel 0 @ f3007000
  133. [ 1.570230] Console: switching to colour frame buffer device 170x48
  134. [ 1.588173] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driv er
  135. [ 1.595923] uart-pl011 dev:f1: no DMA platform data
  136. [ 1.601450] vc-cma: Videocore CMA driver
  137. [ 1.605456] vc-cma: vc_cma_base = 0x00000000
  138. [ 1.610276] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
  139. [ 1.615774] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  140. [ 1.633257] brd: module loaded
  141. [ 1.642354] loop: module loaded
  142. [ 1.645888] vchiq: vchiq_init_state: slot_zero = 0xbd800000, is_master = 0
  143. [ 1.653747] Loading iSCSI transport class v2.0-870.
  144. [ 1.659751] usbcore: registered new interface driver smsc95xx
  145. [ 1.665676] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  146. [ 1.871926] Core Release: 2.80a
  147. [ 1.878559] Setting default values for core params
  148. [ 1.886799] Finished setting default values for core params
  149. [ 2.096221] Using Buffer DMA mode
  150. [ 2.102961] Periodic Transfer Interrupt Enhancement - disabled
  151. [ 2.112263] Multiprocessor Interrupt Enhancement - disabled
  152. [ 2.121362] OTG VER PARAM: 0, OTG VER FLAG: 0
  153. [ 2.129245] Dedicated Tx FIFOs mode
  154. [ 2.136551] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbdc 14000 dma = 0xfdc14000 len=9024
  155. [ 2.150040] FIQ FSM acceleration enabled for :
  156. [ 2.150040] Non-periodic Split Transactions
  157. [ 2.150040] Periodic Split Transactions
  158. [ 2.150040] High-Speed Isochronous Endpoints
  159. [ 2.180662] dwc_otg: Microframe scheduler enabled
  160. [ 2.180737] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x803d98b4
  161. [ 2.190087] WARN::hcd_init_fiq:413: FIQ ASM at 0x803d9c10 length 36
  162. [ 2.199768] WARN::hcd_init_fiq:438: MPHI regs_base at 0xbe80a000
  163. [ 2.209175] dwc_otg bcm2708_usb: DWC OTG Controller
  164. [ 2.217464] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  165. [ 2.228152] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  166. [ 2.237040] Init: Port Power? op_state=1
  167. [ 2.244381] Init: Power Port (0)
  168. [ 2.251248] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  169. [ 2.261510] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
  170. [ 2.272167] usb usb1: Product: DWC OTG Controller
  171. [ 2.280243] usb usb1: Manufacturer: Linux 3.18.11-v7+ dwc_otg_hcd
  172. [ 2.289735] usb usb1: SerialNumber: bcm2708_usb
  173. [ 2.298588] hub 1-0:1.0: USB hub found
  174. [ 2.305761] hub 1-0:1.0: 1 port detected
  175. [ 2.313558] dwc_otg: FIQ enabled
  176. [ 2.313572] dwc_otg: NAK holdoff enabled
  177. [ 2.313583] dwc_otg: FIQ split-transaction FSM enabled
  178. [ 2.313624] Module dwc_common_port init
  179. [ 2.314022] usbcore: registered new interface driver usb-storage
  180. [ 2.323813] mousedev: PS/2 mouse device common for all mice
  181. [ 2.333450] bcm2835-cpufreq: min=600000 max=900000
  182. [ 2.342036] sdhci: Secure Digital Host Controller Interface driver
  183. [ 2.351647] sdhci: Copyright(c) Pierre Ossman
  184. [ 2.359635] DMA channels allocated for the MMC driver
  185. [ 2.397797] Load BCM2835 MMC driver
  186. [ 2.408273] sdhci-pltfm: SDHCI platform and OF driver helper
  187. [ 2.418154] ledtrig-cpu: registered to indicate activity on CPUs
  188. [ 2.427913] hidraw: raw HID events driver (C) Jiri Kosina
  189. [ 2.437153] usbcore: registered new interface driver usbhid
  190. [ 2.447329] usbhid: USB HID core driver
  191. [ 2.456011] TCP: cubic registered
  192. [ 2.462853] Initializing XFRM netlink socket
  193. [ 2.470654] NET: Registered protocol family 17
  194. [ 2.478812] Key type dns_resolver registered
  195. [ 2.486930] Registering SWP/SWPB emulation handler
  196. [ 2.496177] registered taskstats version 1
  197. [ 2.503980] vc-sm: Videocore shared memory driver
  198. [ 2.512150] [vc_sm_connected_init]: start
  199. [ 2.517911] Indeed it is in host mode hprt0 = 00021501
  200. [ 2.528379] vc_vchi_sm_init: failed to open VCHI service (-1)
  201. [ 2.534062] [vc_sm_connected_init]: failed to initialize shared memory servic e
  202. [ 2.548126] [vc_sm_connected_init]: end - returning -1
  203. [ 2.557692] Waiting for root device /dev/mmcblk0p2...
  204. [ 2.573197] mmc0: host does not support reading read-only switch, assuming wr ite-enable
  205. [ 2.589966] mmc0: new high speed SDHC card at address 59b4
  206. [ 2.599609] mmcblk0: mmc0:59b4 SDU32 29.5 GiB
  207. [ 2.608938] mmcblk0: p1 p2
  208. [ 2.692466] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O pts: (null)
  209. [ 2.704236] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  210. [ 2.707892] usb 1-1: new high-speed USB device number 2 using dwc_otg
  211. [ 2.714653] Indeed it is in host mode hprt0 = 00001101
  212. [ 2.734387] devtmpfs: mounted
  213. [ 2.741497] Freeing unused kernel memory: 384K (80754000 - 807b4000)
  214. [ 2.908181] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  215. [ 2.918600] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  216. [ 2.930349] hub 1-1:1.0: USB hub found
  217. [ 2.937825] hub 1-1:1.0: 5 ports detected
  218. [ 3.218051] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  219. [ 3.328342] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  220. [ 3.339553] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber =0
  221. [ 3.353807] smsc95xx v1.0.4
  222. [ 3.422557] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1 .1, smsc95xx USB 2.0 Ethernet, b8:27:eb:dd:7f:38
  223. [ 3.518118] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
  224. [ 3.679159] usb 1-1.2: New USB device found, idVendor=0d62, idProduct=001c
  225. [ 3.690144] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber =0
  226. [ 3.701630] usb 1-1.2: Product: USB+PS2 Keyboard
  227. [ 3.710775] usb 1-1.2: Manufacturer: Generic
  228. [ 3.738033] input: Generic USB+PS2 Keyboard as /devices/platform/bcm2708_usb/ usb1/1-1/1-1.2/1-1.2:1.0/0003:0D62:001C.0001/input/input0
  229. [ 3.754907] hid-generic 0003:0D62:001C.0001: input,hidraw0: USB HID v1.10 Key board [Generic USB+PS2 Keyboard] on usb-bcm2708_usb-1.2/input0
  230. [ 3.796357] input: Generic USB+PS2 Keyboard as /devices/platform/bcm2708_usb/ usb1/1-1/1-1.2/1-1.2:1.1/0003:0D62:001C.0002/input/input1
  231. [ 3.813766] hid-generic 0003:0D62:001C.0002: input,hidraw1: USB HID v1.10 Dev ice [Generic USB+PS2 Keyboard] on usb-bcm2708_usb-1.2/input1
  232. [ 3.889726] udevd[174]: starting version 175
  233. [ 3.908040] usb 1-1.4: new full-speed USB device number 5 using dwc_otg
  234. [ 4.027461] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52b
  235. [ 4.039080] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber =0
  236. [ 4.051681] usb 1-1.4: Product: USB Receiver
  237. [ 4.060837] usb 1-1.4: Manufacturer: Logitech
  238. [ 4.086027] input: Logitech USB Receiver as /devices/platform/bcm2708_usb/usb 1/1-1/1-1.4/1-1.4:1.0/0003:046D:C52B.0003/input/input2
  239. [ 4.103683] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Key board [Logitech USB Receiver] on usb-bcm2708_usb-1.4/input0
  240. [ 4.142925] input: Logitech USB Receiver as /devices/platform/bcm2708_usb/usb 1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0004/input/input3
  241. [ 4.166040] hid-generic 0003:046D:C52B.0004: input,hiddev0,hidraw3: USB HID v 1.11 Mouse [Logitech USB Receiver] on usb-bcm2708_usb-1.4/input1
  242. [ 4.195204] hid-generic 0003:046D:C52B.0005: hiddev0,hidraw4: USB HID v1.11 D evice [Logitech USB Receiver] on usb-bcm2708_usb-1.4/input2
  243. [ 4.423848] bcm2708_spi 3f204000.spi: master is unqueued, this is deprecated
  244. [ 4.461614] bcm2708_spi 3f204000.spi: SPI Controller at 0x3f204000 (irq 80)
  245. [ 4.498398] bcm2708_i2c_init_pinmode(1,2)
  246. [ 4.524771] bcm2708_i2c_init_pinmode(1,3)
  247. [ 4.553360] bcm2708_i2c 3f804000.i2c: BSC1 Controller at 0x3f804000 (irq 79) (baudrate 100000)
  248. [ 5.610477] random: nonblocking pool is initialized
  249. [ 6.535985] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  250. [ 6.842367] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  251. [ 11.091531] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  252. [ 12.751386] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E 1
  253. [ 15.683226] Adding 102396k swap on /var/swap. Priority:-1 extents:2 across:2 134012k SSFS
  254. [ 58.094271] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  255. [ 58.930079] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  256. [ 60.516989] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E 1
  257. [ 167.001322] usb 1-1.2: USB disconnect, device number 4
  258. [ 168.025452] usb 1-1.4: USB disconnect, device number 5
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!