Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2015.01-rc2-00086-g38cd8c4-dirty (Nov 28 2014 - 17:45:52)
- MMC: block number 0x100 exceeds max(0x0)
- MMC: block number 0x200 exceeds max(0x0)
- *** Error - No Valid Environment Area found
- Using default environment
- reading u-boot.img
- reading u-boot.img
- U-Boot 2015.01-rc2-00086-g38cd8c4-dirty (Nov 28 2014 - 17:45:52)
- Watchdog enabled
- I2C: ready
- DRAM: 512 MiB
- MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
- Net: cpsw, usb_ether
- Hit any key to stop autoboot: 0
- switch to partitions #0, OK
- mmc0 is current device
- SD/MMC found on device 0
- reading uEnv.txt
- 505 bytes read in 4 ms (123 KiB/s)
- Loaded environment from uEnv.txt
- Importing environment from mmc ...
- Running uenvcmd ...
- Booting from network ...
- cpsw Waiting for PHY auto negotiation to complete. done
- link up on port 0, speed 100, full duplex
- BOOTP broadcast 1
- DHCP client bound to address 10.10.0.24 (3 ms)
- link up on port 0, speed 100, full duplex
- Using cpsw device
- TFTP from server 10.10.0.1; our IP address is 10.10.0.24
- Filename 'bone-rootfs/boot/uImage-dtb.am335x-boneblack-mainline'.
- Load address: 0x80200000
- Loading: #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #
- 3.1 MiB/s
- done
- Bytes transferred = 4783662 (48fe2e hex)
- ## Booting kernel from Legacy Image at 80200000 ...
- Image Name: Linux-3.18.0-rc6-00047-g3686c16-
- Created: 2014-11-28 15:55:20 UTC
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 4783598 Bytes = 4.6 MiB
- Load Address: 80008000
- Entry Point: 80008000
- Verifying Checksum ... OK
- Could not find a valid device tree
- ** File not found /boot/bone-rootfs/boot/uImage-dtb.am335x-boneblack-mainline **
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement