[45124.156057] usb 1-1: Product: RTL8188S WLAN Adapter
[45124.156061] usb 1-1: Manufacturer: Manufacturer Realtek
[45124.156066] usb 1-1: SerialNumber: 00e04c000001
[45124.156308] usb 1-1: configuration #1 chosen from 1 choice
[45124.158692] ==>ep_num:4, in_ep_num:1, out_ep_num:3
[45124.158697] ==>RtInPipes:3
[45124.158701] ==>RtOutPipes:4  6  13
[45124.158708] ==>txqueue_to_outpipemap for BK, BE, VI, VO, HCCA, TXCMD, MGNT,
HIGH, BEACON:
[45124.158712] 1  1  0  0  2  2  2  2  2
[45125.169874] Dot11d_Init()
[45267.754104] rtl819xU: --->FirmwareDownload92S()
[45267.754109]
[45267.754119] usb 1-1: firmware: requesting RTL8192SU/rtl8192sfw.bin
[45267.846731] rtl819xU:signature:8192, version:902b, size:30, imemsize:7408,
sram size:9688
[45267.846736]
[45267.846828] rtl819xU:--->FirmwareDownloadCode()
[45267.846831]
[45267.846989] rtl819xU:--->FirmwareCheckReady(): LoadStaus(1),
[45267.877110] rtl819xU:<---FirmwareCheckReady(): LoadFWStatus(1), rtStatus(0)
[45267.877114]
[45267.877120] rtl819xU:--->FirmwareDownloadCode()
[45267.877122]
[45267.877325] rtl819xU:--->FirmwareCheckReady(): LoadStaus(2),
[45267.916182] rtl819xU:-->FirmwareEnableCPU()
[45267.916185]
[45267.921090] rtl819xU:IMEM Ready after CPU has refilled.
[45267.921095]
[45267.921100] rtl819xU:<--FirmwareEnableCPU(): rtStatus(0x0)
[45267.921102]
[45267.921106] rtl819xU:<---FirmwareCheckReady(): LoadFWStatus(2), rtStatus(0)
[45267.921109]
[45267.921114] rtl819xU:--->FirmwareDownloadCode()
[45267.921117]
[45267.921132] rtl819xU:--->FirmwareCheckReady(): LoadStaus(3),
[45267.922073] rtl819xU:DMEM code download success, CPUStatus(0x3f)
[45267.922075]
[45267.924324] rtl819xU:Polling Load Firmware ready, CPUStatus(ff)
[45267.924327]
[45267.928189] rtl819xU:FirmwareCheckReady(): Current RCR settings(0x157e20e)
[45267.928193]
[45267.929092] rtl819xU:<---FirmwareCheckReady(): LoadFWStatus(3), rtStatus(0)
[45267.929095]
[45267.929100] rtl819xU:Firmware Download Success!!
[45267.929102]
[45271.264791] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[45332.239498] =====>rtl8192SU_link_change 1
[45332.243380] <=====rtl8192SU_link_change 2
[45332.315249] =====>rtl8192SU_link_change 1
[45332.315437] Linking with rospanet,channel:1, qos:0, myHT:1, networkHT:0,
mode:6
[45332.349700] Linking with rospanet,channel:1, qos:0, myHT:1, networkHT:0,
mode:6
[45332.349717] Linking with rospanet,channel:1, qos:0, myHT:1, networkHT:0,
mode:6
[45332.353027] <=====rtl8192SU_link_change 2
[45332.353037] =====>rtl8192SU_link_change 1
[45332.357950] <=====rtl8192SU_link_change 2
[45332.357961] ===>ieee80211_associate_procedure_wq(), chan:1
[45332.427963] rtl819xU:==>SetBWModeCallback8192SUsbWorkItem()  Switch to
20MHz bandwidth
[45332.427969]
[45332.481310] rtl819xU:<==SetBWModeCallback8192SUsbWorkItem()
[45332.481326] =================>ieee80211_authentication_req():auth-
>algorithm is 0
[45332.481379] Linking with rospanet,channel:1, qos:0, myHT:1, networkHT:0,
mode:6
[45332.485148] =====>rtl8192SU_link_change 1
[45332.489453] <=====rtl8192SU_link_change 2
[45332.489465] ===>ieee80211_associate_procedure_wq(), chan:1
[45332.564491] rtl819xU:==>SetBWModeCallback8192SUsbWorkItem()  Switch to
20MHz bandwidth
[45332.564496]
[45332.594292] rtl819xU:<==SetBWModeCallback8192SUsbWorkItem()
[45332.594307] =================>ieee80211_authentication_req():auth-
>algorithm is 0
[45332.602517] rtl819xU:rtl8192_qos_association_resp: network->flags = 2,0
[45332.602520]
[45332.602581] rtl819xU:qos active process with associate response received
[45332.602584]
[45332.602607] Associated successfully
[45332.602612] Using G rates:108
[45332.602616] Successfully associated, ht not enabled(0, 0)
[45332.602621] =====>rtl8192SU_link_change 1
[45332.618292] =============>ARFR0+rate_index*4:0xfff
[45332.649282] <=====rtl8192SU_link_change 2
[45332.649288] ============>normal associate
[45332.649380] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[45332.662694] alg name:CCMP
[45332.662724] rtl819xU:EnableHWSecurityConfig8192:, hwsec:1, pairwise_key:4,
SECR_value:c
[45332.662727]
[45332.663303] rtl819xU:====>to setKey(), dev:cf018000, EntryNo:4, KeyIndex:0,
KeyType:4, MacAddr02:7d:68:d8:2d:e1
[45332.663306]
[45332.693327] alg name:TKIP
[45332.693365] rtl819xU:====>to setKey(), dev:cf018000, EntryNo:1, KeyIndex:1,
KeyType:2, MacAddrff:ff:ff:ff:ff:ff
[45332.693369]
[45333.788168] rtl819xU:Error TX URB for zero byte 0, error -2
[45337.788109] rtl819xU:Error TX URB for zero byte -1, error -2