Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-16-pve (root@maui) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Mon Oct 22 08:38:13 CEST 2012
Command line: BOOT_IMAGE=/vmlinuz-2.6.32-16-pve root=/dev/mapper/pve-root ro quiet
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 0000000000098000 (usable)
 BIOS-e820: 0000000000098000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
 BIOS-e820: 00000000cff90000 - 00000000cff9e000 (ACPI data)
 BIOS-e820: 00000000cff9e000 - 00000000cffe0000 (ACPI NVS)
 BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
DMI present.
SMBIOS version 2.6 @ 0xF9670
DMI: MSI MS-7599/870A-G54 (MS-7599), BIOS V17.19 11/01/2012
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x430000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000430000000 aka 17152M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcff90 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cff90000
 0000000000 - 00c0000000 page 1G
 00c0000000 - 00cfe00000 page 2M
 00cfe00000 - 00cff90000 page 4k
kernel direct mapping tables up to cff90000 @ 10000-13000
init_memory_mapping: 0000000100000000-0000000430000000
 0100000000 - 0400000000 page 1G
 0400000000 - 0430000000 page 2M
kernel direct mapping tables up to 430000000 @ 12000-14000
RAMDISK: 3707f000 - 37fef3bf
ACPI: RSDP 00000000000f8c50 00014 (v00 ACPIAM)
ACPI: RSDT 00000000cff90000 0003C (v01 7599MS A7599300 20121101 MSFT 00000097)
ACPI: FACP 00000000cff90200 00084 (v01 7599MS A7599300 20121101 MSFT 00000097)
ACPI: DSDT 00000000cff90660 05A15 (v01  A7599 A7599300 00000300 INTL 20051117)
ACPI: FACS 00000000cff9e000 00040
ACPI: APIC 00000000cff90390 0010C (v01 7599MS A7599300 20121101 MSFT 00000097)
ACPI: MCFG 00000000cff904a0 0003C (v01 7599MS OEMMCFG  20121101 MSFT 00000097)
ACPI: OEMB 00000000cff9e040 00072 (v01 7599MS A7599300 20121101 MSFT 00000097)
ACPI: HPET 00000000cff9a660 00038 (v01 7599MS OEMHPET  20121101 MSFT 00000097)
ACPI: SSDT 00000000cff9a6a0 00E10 (v01 A M I  POWERNOW 00000001 AMD  00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-0000000430000000
Bootmem setup node 0 0000000000000000-0000000430000000
  NODE_DATA [0000000000013000 - 0000000000047fff]
  bootmap [0000000000100000 -  0000000000185fff] pages 86
(8 early reservations) ==> bootmem [0000000000 - 0430000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 000242af84]    TEXT DATA BSS ==> [0001000000 - 000242af84]
  #3 [003707f000 - 0037fef3bf]          RAMDISK ==> [003707f000 - 0037fef3bf]
  #4 [0000098000 - 0000100000]    BIOS reserved ==> [0000098000 - 0000100000]
  #5 [000242b000 - 000242b1a5]              BRK ==> [000242b000 - 000242b1a5]
  #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
  #7 [0000012000 - 0000013000]          PGTABLE ==> [0000012000 - 0000013000]
found SMP MP-table at [ffff8800000ff780] ff780
 [ffffea0000000000-ffffea000f5fffff] PMD -> [ffff880028600000-ffff880036ffffff] on node 0
 [ffffea000f600000-ffffea0010bfffff] PMD -> [ffff880038000000-ffff8800395fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00430000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x00000098
    0: 0x00000100 -> 0x000cff90
    0: 0x00100000 -> 0x00430000
On node 0 totalpages: 4194072
  DMA zone: 64 pages used for memmap
  DMA zone: 110 pages reserved
  DMA zone: 3802 pages, LIFO batch:0
  DMA32 zone: 16320 pages used for memmap
  DMA32 zone: 831440 pages, LIFO batch:31
  Normal zone: 52224 pages used for memmap
  Normal zone: 3290112 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 24 CPUs, 18 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
PM: Registered nosave memory: 00000000cff90000 - 00000000cff9e000
PM: Registered nosave memory: 00000000cff9e000 - 00000000cffe0000
PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:2ff00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:1
PERCPU: Embedded 39 pages/cpu @ffff880039600000 s128024 r8192 d23528 u262144
pcpu-alloc: s128024 r8192 d23528 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4125354
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-16-pve root=/dev/mapper/pve-root ro quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
AMD-Vi disabled by default: pass amd_iommu=on to enable
PRAM: banned regions:
   0: [00000000 - 0000242b] 9260 pages
   1: [00020000 - 00028404] 33797 pages
   2: [00028600 - 00036fff] 59904 pages
   3: [0003707f - 00037fef] 3953 pages
   4: [00038000 - 00039bff] 7168 pages
Total banned: 114082 pages in 5 regions
Memory: 16407788k/17563648k available (5317k kernel code, 787360k absent, 368500k reserved, 7017k data, 1316k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:600
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2799.924 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.84 BogoMIPS (lpj=2799924)
pid_max: default: 1048576 minimum: 301
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
using C1E aware idle routine
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21356 entries in 84 pages
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X6 1055T Processor stepping 00
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1
System has AMD C1E enabled
Switch to broadcast mode on CPU1
 #2
Switch to broadcast mode on CPU2
 #3
Switch to broadcast mode on CPU3
 #4
Switch to broadcast mode on CPU4
 #5
Brought up 6 CPUs
Total of 6 processors activated (33599.08 BogoMIPS).
Switch to broadcast mode on CPU5
sizeof(vma)=200 bytes
sizeof(page)=64 bytes
sizeof(inode)=664 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=872 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=264 bytes
sizeof(task_struct)=2744 bytes
Switch to broadcast mode on CPU0
devtmpfs: initialized
PM: Registering ACPI NVS region at cff9e000 (270336 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [e0000000, efffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
TOM2: 0000000430000000 aka 17152M
bus: [00,1f] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [f0000000, ffffffff]
bus: 00 index 2 mmio: [a0000, bffff]
bus: 00 index 3 mmio: [d0000000, dfffffff]
bus: 00 index 4 mmio: [430000000, fcffffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:11.0: reg 10: [io  0xa000-0xa007]
pci 0000:00:11.0: reg 14: [io  0x9000-0x9003]
pci 0000:00:11.0: reg 18: [io  0x8000-0x8007]
pci 0000:00:11.0: reg 1c: [io  0x7000-0x7003]
pci 0000:00:11.0: reg 20: [io  0x6000-0x600f]
pci 0000:00:11.0: reg 24: [mem 0xfbfffc00-0xfbffffff]
pci 0000:00:12.0: reg 10: [mem 0xfbffe000-0xfbffefff]
pci 0000:00:12.2: reg 10: [mem 0xfbfff800-0xfbfff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0xfbffd000-0xfbffdfff]
pci 0000:00:13.2: reg 10: [mem 0xfbfff400-0xfbfff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.5: reg 10: [mem 0xfbffc000-0xfbffcfff]
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.1: supports D1 D2
pci 0000:00:16.0: reg 10: [mem 0xfbff7000-0xfbff7fff]
pci 0000:00:16.2: reg 10: [mem 0xfbfff000-0xfbfff0ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: PME# disabled
pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xfe7e0000-0xfe7fffff pref]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfe7fffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 10: [io  0xb800-0xb8ff]
pci 0000:02:00.0: reg 18: [mem 0xfe8fb000-0xfe8fbfff 64bit]
pci 0000:02:00.0: reg 20: [mem 0xfaef0000-0xfaefffff 64bit pref]
pci 0000:02:00.0: reg 30: [mem 0xfe8e0000-0xfe8effff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:04.0:   bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:04.0:   bridge window [mem 0xfae00000-0xfaefffff 64bit pref]
pci 0000:00:0a.0: PCI bridge to [bus 03-03]
pci 0000:00:0a.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:0a.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0a.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci 0000:05:00.0: reg 10: [io  0xd800-0xd807]
pci 0000:05:00.0: reg 14: [io  0xd400-0xd403]
pci 0000:05:00.0: reg 18: [io  0xd000-0xd007]
pci 0000:05:00.0: reg 1c: [io  0xc800-0xc803]
pci 0000:05:00.0: reg 20: [io  0xc400-0xc40f]
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:15.0: PCI bridge to [bus 05-05]
pci 0000:00:15.0:   bridge window [io  0xc000-0xdfff]
pci 0000:00:15.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:15.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:15.1: PCI bridge to [bus 06-06]
pci 0000:00:15.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:15.1:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:15.1:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *4 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:00.0: can't reserve [mem 0xe0000000-0xffffffff 64bit]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io  0x0000-0x000f]
pnp 00:01: [io  0x0081-0x0083]
pnp 00:01: [io  0x0087]
pnp 00:01: [io  0x0089-0x008b]
pnp 00:01: [io  0x008f]
pnp 00:01: [io  0x00c0-0x00df]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io  0x0070-0x0071]
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io  0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io  0x00f0-0x00ff]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [mem 0xfed00000-0xfed003ff]
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:06: [io  0x0060]
pnp 00:06: [io  0x0064]
pnp 00:06: [mem 0xfec00000-0xfec00fff]
pnp 00:06: [mem 0xfee00000-0xfee00fff]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io  0x0010-0x001f]
pnp 00:07: [io  0x0022-0x003f]
pnp 00:07: [io  0x0062-0x0063]
pnp 00:07: [io  0x0065-0x006f]
pnp 00:07: [io  0x0072-0x007f]
pnp 00:07: [io  0x0080]
pnp 00:07: [io  0x0084-0x0086]
pnp 00:07: [io  0x0088]
pnp 00:07: [io  0x008c-0x008e]
pnp 00:07: [io  0x0090-0x009f]
pnp 00:07: [io  0x00a2-0x00bf]
pnp 00:07: [io  0x00b1]
pnp 00:07: [io  0x00e0-0x00ef]
pnp 00:07: [io  0x04d0-0x04d1]
pnp 00:07: [io  0x040b]
pnp 00:07: [io  0x04d6]
pnp 00:07: [io  0x0c00-0x0c01]
pnp 00:07: [io  0x0c14]
pnp 00:07: [io  0x0c50-0x0c51]
pnp 00:07: [io  0x0c52]
pnp 00:07: [io  0x0c6c]
pnp 00:07: [io  0x0c6f]
pnp 00:07: [io  0x0cd0-0x0cd1]
pnp 00:07: [io  0x0cd2-0x0cd3]
pnp 00:07: [io  0x0cd4-0x0cd5]
pnp 00:07: [io  0x0cd6-0x0cd7]
pnp 00:07: [io  0x0cd8-0x0cdf]
pnp 00:07: [io  0x0800-0x089f]
pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io  0x0b00-0x0b1f]
pnp 00:07: [io  0x0b20-0x0b3f]
pnp 00:07: [io  0x0900-0x090f]
pnp 00:07: [io  0x0910-0x091f]
pnp 00:07: [io  0xfe00-0xfefe]
pnp 00:07: [io  0x0060]
pnp 00:07: [io  0x0064]
pnp 00:07: [mem 0xffb80000-0xffbfffff]
pnp 00:07: [mem 0xfec10000-0xfec1001f]
pnp 00:07: [mem 0xfed80000-0xfed80fff]
pnp 00:07: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io  0x0600-0x06df]
pnp 00:08: [io  0x0ae0-0x0aef]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0xe0000000-0xefffffff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0x00000000-0x0009ffff]
pnp 00:0a: [mem 0x000c0000-0x000cffff]
pnp 00:0a: [mem 0x000e0000-0x000fffff]
pnp 00:0a: [mem 0x00100000-0xcfffffff]
pnp 00:0a: [mem 0xfec00000-0xffffffff]
pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x00100000-0xcfffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: [io  0x04d0-0x04d1] has been reserved
system 00:07: [io  0x040b] has been reserved
system 00:07: [io  0x04d6] has been reserved
system 00:07: [io  0x0c00-0x0c01] has been reserved
system 00:07: [io  0x0c14] has been reserved
system 00:07: [io  0x0c50-0x0c51] has been reserved
system 00:07: [io  0x0c52] has been reserved
system 00:07: [io  0x0c6c] has been reserved
system 00:07: [io  0x0c6f] has been reserved
system 00:07: [io  0x0cd0-0x0cd1] has been reserved
system 00:07: [io  0x0cd2-0x0cd3] has been reserved
system 00:07: [io  0x0cd4-0x0cd5] has been reserved
system 00:07: [io  0x0cd6-0x0cd7] has been reserved
system 00:07: [io  0x0cd8-0x0cdf] has been reserved
system 00:07: [io  0x0800-0x089f] has been reserved
system 00:07: [io  0x0b00-0x0b1f] has been reserved
system 00:07: [io  0x0b20-0x0b3f] has been reserved
system 00:07: [io  0x0900-0x090f] has been reserved
system 00:07: [io  0x0910-0x091f] has been reserved
system 00:07: [io  0xfe00-0xfefe] has been reserved
system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:07: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:08: [io  0x0600-0x06df] has been reserved
system 00:08: [io  0x0ae0-0x0aef] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0:   bridge window [io  disabled]
pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfe7fffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:04.0:   bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:04.0:   bridge window [mem 0xfae00000-0xfaefffff 64bit pref]
pci 0000:00:0a.0: PCI bridge to [bus 03-03]
pci 0000:00:0a.0: PCI bridge to [bus 03-03]
pci 0000:00:0a.0:   bridge window [io  disabled]
pci 0000:00:0a.0:   bridge window [mem disabled]
pci 0000:00:0a.0:   bridge window [mem pref disabled]
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4:   bridge window [io  disabled]
pci 0000:00:14.4:   bridge window [mem disabled]
pci 0000:00:14.4:   bridge window [mem pref disabled]
pci 0000:00:15.0: PCI bridge to [bus 05-05]
pci 0000:00:15.0: PCI bridge to [bus 05-05]
pci 0000:00:15.0:   bridge window [io  0xc000-0xdfff]
pci 0000:00:15.0:   bridge window [mem disabled]
pci 0000:00:15.0:   bridge window [mem pref disabled]
pci 0000:00:15.1: PCI bridge to [bus 06-06]
pci 0000:00:15.1: PCI bridge to [bus 06-06]
pci 0000:00:15.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:15.1:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:15.1:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
  alloc irq_desc for 18 on node 0
  alloc kstat_irqs on node 0
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
  alloc irq_desc for 16 on node 0
  alloc kstat_irqs on node 0
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:0a.0: setting latency timer to 64
pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:15.0: setting latency timer to 64
pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:15.1: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe7fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:02: resource 2 [mem 0xfae00000-0xfaefffff 64bit pref]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:05: resource 0 [io  0xc000-0xdfff]
pci_bus 0000:06: resource 0 [io  0xe000-0xefff]
pci_bus 0000:06: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:06: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:12.0: PCI INT A disabled
  alloc irq_desc for 17 on node 0
  alloc kstat_irqs on node 0
pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:12.2: PCI INT B disabled
pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.0: PCI INT A disabled
pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:13.2: PCI INT B disabled
pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:14.5: PCI INT C disabled
pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:16.0: PCI INT A disabled
pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:16.2: PCI INT B disabled
pci 0000:01:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15808k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1354365196.407:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32077
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
  alloc irq_desc for 24 on node 0
  alloc kstat_irqs on node 0
pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
pcieport 0000:00:04.0: setting latency timer to 64
  alloc irq_desc for 25 on node 0
  alloc kstat_irqs on node 0
pcieport 0000:00:04.0: irq 25 for MSI/MSI-X
pcieport 0000:00:0a.0: setting latency timer to 64
  alloc irq_desc for 26 on node 0
  alloc kstat_irqs on node 0
pcieport 0000:00:0a.0: irq 26 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ERST: Table is not found!
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbfff800
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-16-pve ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfbfff400
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-16-pve ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 17, io mem 0xfbfff000
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-16-pve ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfbffe000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-16-pve ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbffd000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-16-pve ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbffc000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-16-pve ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfbff7000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-16-pve ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Bridge firewalling registered
registered taskstats version 1
rtc_cmos 00:02: setting system clock to 2012-12-01 12:33:16 UTC (1354365196)
Initalizing network drop monitor service
Freeing unused kernel memory: 1316k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 808k freed
Freeing unused kernel memory: 1684k freed
udev[137]: starting version 164
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:02:00.0: setting latency timer to 64
  alloc irq_desc for 27 on node 0
  alloc kstat_irqs on node 0
r8169 0000:02:00.0: irq 27 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90001872000, 00:e0:4c:80:1a:50, XID 1c4000c0 IRQ 27
r8169 0000:02:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
ahci 0000:00:11.0: version 3.0
  alloc irq_desc for 19 on node 0
  alloc kstat_irqs on node 0
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  alloc irq_desc for 28 on node 0
  alloc kstat_irqs on node 0
ahci 0000:00:11.0: irq 28 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffd00 irq 28
ata2: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffd80 irq 28
ata3: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffe00 irq 28
ata4: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffe80 irq 28
ata5: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbffff00 irq 28
ata6: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbffff80 irq 28
pata_jmicron 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_jmicron 0000:05:00.0: setting latency timer to 64
scsi6 : pata_jmicron
scsi7 : pata_jmicron
ata7: PATA max UDMA/100 cmd 0xd800 ctl 0xd400 bmdma 0xc400 irq 16
ata8: PATA max UDMA/100 cmd 0xd000 ctl 0xc800 bmdma 0xc408 irq 16
usb 4-2: new low speed USB device number 2 using ohci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
usb 4-2: New USB device found, idVendor=093a, idProduct=2510
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: USB OPTICAL MOUSE
usb 4-2: Manufacturer: PIXART
usb 4-2: configuration #1 chosen from 1 choice
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input3
generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:12.0-2/input0
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: ST1500DL003-9VT16L, CC32, max UDMA/133
ata3.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata6.00: ATA-8: ST1500DL003-9VT16L, CC32, max UDMA/133
ata6.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
ata6.00: configured for UDMA/133
ata1.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD154UI  1AG0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 0:0:0:0: [sda] Write Protect is off
scsi 2:0:0:0: Direct-Access     ATA      ST1500DL003-9VT1 CC32 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
scsi 5:0:0:0: Direct-Access     ATA      ST1500DL003-9VT1 CC32 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb:
 sdc: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
 unknown partition table
sd 2:0:0:0: [sdb] Attached SCSI disk
 unknown partition table
sd 5:0:0:0: [sdc] Attached SCSI disk
Refined TSC clocksource calibration: 2799.983 MHz.
Switching to clocksource tsc
EXT3-fs (dm-0): recovery required on readonly filesystem
EXT3-fs (dm-0): write access will be enabled during recovery
EXT3-fs: barriers disabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (dm-0): orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 5243048
EXT3-fs (dm-0): 1 orphan inode deleted
EXT3-fs (dm-0): recovery complete
EXT3-fs (dm-0): mounted filesystem with ordered data mode
udev[420]: starting version 164
ACPI: WMI: Mapper loaded
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0 Oct 22 2012
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[drm] Initialized drm 1.1.0 20060810
input: PC Speaker as /devices/platform/pcspkr/input/input4
VGA switcheroo: detected Optimus DSM method \ handle
nouveau 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x044300b2)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 05.44.02.32
[drm] nouveau 0000:01:00.0: TMDS table version 1.1
[drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:01:00.0: DCB version 3.0
[drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 00000028
[drm] nouveau 0000:01:00.0: DCB outp 01: 02011310 00000028
[drm] nouveau 0000:01:00.0: DCB outp 02: 01011312 00000000
[drm] nouveau 0000:01:00.0: DCB outp 03: 020223f1 0084c080
[drm] nouveau 0000:01:00.0: DCB conn 00: 0000
[drm] nouveau 0000:01:00.0: DCB conn 01: 2130
[drm] nouveau 0000:01:00.0: DCB conn 02: 0210
[drm] nouveau 0000:01:00.0: DCB conn 03: 0211
[drm] nouveau 0000:01:00.0: DCB conn 04: 0213
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDCB6
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDF98
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE47C
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE5D9
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE781
[drm] nouveau 0000:01:00.0: mem timing table length unknown: 14
[drm] nouveau 0000:01:00.0: 1 available performance level(s)
[drm] nouveau 0000:01:00.0: 0: core 350MHz shader 350MHz memory 532MHz fanspeed 100%
[drm] nouveau 0000:01:00.0: c: core 200MHz memory 401MHz
[TTM] Zone  kernel: Available graphics memory: 8213704 kiB.
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[TTM] Initializing pool allocator.
[TTM] Initializing DMA pool allocator.
[drm] nouveau 0000:01:00.0: Detected 64MiB VRAM
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] nouveau 0000:01:00.0: Saving VGA fonts
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:01:00.0: 0xD102: Parsing digital output script table
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[drm] nouveau 0000:01:00.0: Load detected on output A
[drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo ffff880429eb1c00
fbcon: nouveaufb (fb0) is primary device
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
Console: switching to colour frame buffer device 128x48
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
EXT3-fs (dm-0): using internal journal
Adding 15728632k swap on /dev/mapper/pve-swap.  Priority:-1 extents:1 across:15728632k
EXT3-fs: barriers disabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (dm-2): using internal journal
EXT3-fs (dm-2): mounted filesystem with ordered data mode
EXT3-fs: barriers disabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with ordered data mode
device eth0 entered promiscuous mode
r8169 0000:02:00.0: eth0: link down
r8169 0000:02:00.0: eth0: link down
fuse init (API version 7.13)
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
r8169 0000:02:00.0: eth0: link up
NET: Registered protocol family 10
vmbr0: port 1(eth0) entering forwarding state
iscsi: registered transport (iser)
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Enabling conntracks and NAT for ve0
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
Registering the id_resolver key type
FS-Cache: Netfs 'nfs' registered for caching
ploop_dev: module loaded
eth0: no IPv6 routers present
venet0: no IPv6 routers present
device tap100i0 entered promiscuous mode
vmbr0: port 2(tap100i0) entering forwarding state
tap100i0: no IPv6 routers present
usb 4-2: USB disconnect, device number 2
usb 4-2: new low speed USB device number 3 using ohci_hcd
usb 4-2: New USB device found, idVendor=093a, idProduct=2510
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: USB OPTICAL MOUSE
usb 4-2: Manufacturer: PIXART
usb 4-2: configuration #1 chosen from 1 choice
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input5
generic-usb 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:12.0-2/input0
kvm: 1611: cpu0 unhandled rdmsr: 0xc0010001
vmbr0: port 2(tap100i0) entering disabled state
vmbr0: port 2(tap100i0) entering disabled state
usb 4-2: USB disconnect, device number 3
usb 4-2: new low speed USB device number 4 using ohci_hcd
usb 4-2: New USB device found, idVendor=093a, idProduct=2510
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: USB OPTICAL MOUSE
usb 4-2: Manufacturer: PIXART
usb 4-2: configuration #1 chosen from 1 choice
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input6
generic-usb 0003:093A:2510.0003: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:12.0-2/input0